Update anycubic_i3_mega_s.def.json (#11715)

Added nozzle size
Dynamic wall thickness by nozzle diameter
Added filament costs to standard
First layer speed inheritance
Added maximum temp warnings
Updated FAN
Optimized initial purge of filament

1 files changed, 13 insertions, 8 deletions

diff --git a/resources/definitions/anycubic_i3_mega_s.def.json b/resources/definitions/anycubic_i3_mega_s.def.json
index bf14aed04c..2e972c78b6 100644
--- a/resources/definitions/anycubic_i3_mega_s.def.json
+++ b/resources/definitions/anycubic_i3_mega_s.def.json
@@ -29,7 +29,7 @@
         "machine_center_is_zero": { "default_value": false },
         "gantry_height": { "value": "0" },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
-        "machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21                                        ; metric values \nG90                                        ; absolute positioning \nM82                                        ; set extruder to absolute mode \nM107                                       ; start with the fan off \nM140 S{material_bed_temperature_layer_0}   ; Start heating the bed \nG4 S60                                     ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0}   ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500                            ; BEEP heating done \nG28 X0 Y10 Z0                              ; move X/Y to min endstops \nM420 S1                                    ; Enable leveling \nM420 Z2.0                                  ; Set leveling fading height to 2 mm \nG0 Z0.15                                   ; lift nozzle a bit \nG92 E0                                     ; zero the extruded length \nG1 X50 E20 F500                            ; Extrude 20mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-2 F500                                ; Retract a little \nG1 X120 F4000                              ; Quickly wipe away from the filament line`" },
+        "machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21                                        ; metric values \nG90                                        ; absolute positioning \nM82                                        ; set extruder to absolute mode \nM107                                       ; start with the fan off \nM140 S{material_bed_temperature_layer_0}   ; Start heating the bed \nG4 S60                                     ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0}   ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500                            ; BEEP heating done \nG28 X0 Y10 Z0                              ; move X/Y to min endstops \nM420 S1                                    ; Enable leveling \nM420 Z2.0                                  ; Set leveling fading height to 2 mm \nG0 Z0.15                                   ; lift nozzle a bit \nG92 E0                                     ; zero the extruded length \nG1 X50 E20 F500                            ; Extrude 20mm of filament in a 5cm line. \nG92 E0                                     ; zero the extruded length again \nG1 E-2 F500                                ; Retract a little \nG1 X50 F500                                ; wipe away from the filament line\nG1 X100 F9000                              ; Quickly wipe away from the filament line" },
         "machine_end_gcode": { "default_value": "M104 S0                                    ; Extruder off \nM140 S0                                    ; Heatbed off \nM107                                       ; Fan off \nG91                                        ; relative positioning \nG1 E-5 F300                                ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0                                  ; homing \nG1 Y180 F2000                              ; reset feedrate \nM84                                        ; disable stepper motors \nG90                                        ; absolute positioning \nM300 S440 P200                             ; Make Print Completed Tones \nM300 S660 P250                             ; beep \nM300 S880 P300                             ; beep" },
 
         "machine_max_acceleration_x": { "value": 3000 },
@@ -47,10 +47,17 @@
         "machine_max_jerk_e": { "value": 5 },
 
         "material_diameter": { "default_value": 1.75 },
-        "material_print_temperature_layer_0": { "value": "material_print_temperature + 5"},
+        "material_print_temperature": { "maximum_value_warning": 260 },
+        "material_print_temperature_layer_0": { "value": "material_print_temperature + 5", "maximum_value_warning": 260 },
         "material_final_print_temperature": { "value": "material_print_temperature" },
+        "material_bed_temperature": { "maximum_value_warning": 110 },
+        "material_bed_temperature_layer_0": { "maximum_value_warning": 110 },
+
         "material_flow": { "value": 100 },
 
+        "top_bottom_thickness": { "value":  "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" },
+        "wall_thickness": { "value": "line_width * 3 if line_width < 0.6 else line_width * 2" },
+
         "acceleration_print": { "value": 1500 },
         "acceleration_enabled": { "value": false },
         "acceleration_travel": { "value": 3000 },
@@ -71,8 +78,8 @@
         "speed_roofing": { "value": "speed_topbottom" },
         "speed_travel": { "value": 100.0, "maximum_value_warning": 150.0, "maximum_value": 200.0 },
         "speed_layer_0": { "value": "speed_topbottom if speed_topbottom < 20 else 20" },
-        "speed_print_layer_0": { "value": "speed_topbottom if speed_topbottom < 20 else 20" },
-        "speed_travel_layer_0": { "value": 100.0 },
+        "speed_print_layer_0": { "value": "speed_layer_0" },
+        "speed_travel_layer_0": { "value": "speed_travel" },
         "speed_prime_tower": { "value": "speed_topbottom" },
         "speed_support": { "value": "speed_wall_0" },
         "speed_support_interface": { "value": "speed_topbottom" },
@@ -104,7 +111,7 @@
         "travel_retract_before_outer_wall": { "value": true },
 
         "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
-        "cool_fan_speed": { "value": 70 },
+        "cool_fan_speed": { "value": 100 },
         "cool_fan_speed_0": { "value": 30 },
 
         "cool_fan_enabled": { "value": true },
@@ -137,8 +144,6 @@
         "support_interface_pattern": { "value": "'grid'" },
         "support_interface_skip_height": { "value": 0.2 },
         "minimum_support_area": { "value": 2 },
-        "minimum_interface_area": { "value": 10 },
-        "top_bottom_thickness": { "value":  "layer_height_0 + layer_height * math.floor(1.2 / layer_height)" },
-        "wall_thickness": { "value": "line_width * 3" }
+        "minimum_interface_area": { "value": 10 }
     }
 }