Translations for 4.9

CURA-8153

54 files changed, 75560 insertions, 71468 deletions

diff --git a/resources/i18n/cs_CZ/cura.po b/resources/i18n/cs_CZ/cura.po
index b2b9420729..d712a8f8ca 100644
--- a/resources/i18n/cs_CZ/cura.po
+++ b/resources/i18n/cs_CZ/cura.po
@@ -1,13 +1,13 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 # Ruben Dulek <r.dulek@ultimaker.com>, 2020.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 14:20+0200\n"
 "Last-Translator: DenyCZ <www.github.com/DenyCZ>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -18,175 +18,188 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n>=2 && n<=4 ? 1 : 2);\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Neznámý"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Načítám zařízení..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Níže uvedené tiskárny nelze připojit, protože jsou součástí skupiny"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Nastavuji preference..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Dostupné síťové tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inicializuji aktivní zařízení..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nepřepsáno"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inicializuji správce zařízení..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inicializuji prostor podložky..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Výchozí"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Připravuji scénu..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Vizuální"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Načítám rozhraní..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Vizuální profil je navržen pro tisk vizuálních prototypů a modelů s cílem vysoké vizuální a povrchové kvality."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inicializuji engine..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Technika"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Inženýrský profil je navržen pro tisk funkčních prototypů a koncových částí s cílem lepší přesnosti a bližších tolerancí."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Současně lze načíst pouze jeden soubor G-kódu. Přeskočen import {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Návrh"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Varování"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Návrhový profil je navržen pro tisk počátečních prototypů a ověření koncepce s cílem podstatného zkrácení doby tisku."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nelze otevřít žádný jiný soubor, když se načítá G kód. Přeskočen import {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Chyba"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Vlastní materiál"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Vlastní"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Výchozí"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Neznámý"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Vlastní profily"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Všechny podporované typy ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Všechny soubory (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Přihlášení selhalo"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Hledám nové umístění pro objekt"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Hledám umístění"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Vizuální"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nemohu najít lokaci na podložce pro všechny objekty"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Vizuální profil je navržen pro tisk vizuálních prototypů a modelů s cílem vysoké vizuální a povrchové kvality."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nemohu najít umístění"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Technika"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nelze vytvořit archiv ze složky s uživatelskými daty: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Inženýrský profil je navržen pro tisk funkčních prototypů a koncových částí s cílem lepší přesnosti a bližších tolerancí."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Záloha"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Návrh"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Pokusil se obnovit zálohu Cura bez nutnosti správných dat nebo metadat."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Návrhový profil je navržen pro tisk počátečních prototypů a ověření koncepce s cílem podstatného zkrácení doby tisku."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Pokusil se obnovit zálohu Cura, která je vyšší než aktuální verze."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Níže uvedené tiskárny nelze připojit, protože jsou součástí skupiny"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Výška podložky byla snížena kvůli hodnotě nastavení „Sekvence tisku“, aby se zabránilo kolizi rámu s tištěnými modely."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Dostupné síťové tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Podložka"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nepřepsáno"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura nelze spustit"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -201,32 +214,32 @@ msgstr ""
 "                     <p> Za účelem vyřešení problému nám prosím pošlete tento záznam pádu. </p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Poslat záznam o pádu do Ultimakeru"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Zobrazit podrobný záznam pádu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Zobrazit složku s konfigurací"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Zálohovat a resetovat konfiguraci"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Záznam pádu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -237,1111 +250,767 @@ msgstr ""
 "             <p> Použijte tlačítko „Odeslat zprávu“ k automatickému odeslání hlášení o chybě na naše servery </p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Systémové informace"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Neznámý"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Verze Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Jazyk Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Jazyk operačního systému"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Platforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Verze Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Verze PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Neinicializováno<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Verze OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL Vendor: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Stopování chyby"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Protokoly"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Odeslat záznam"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Načítám zařízení..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Nastavuji preference..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inicializuji aktivní zařízení..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inicializuji správce zařízení..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inicializuji prostor podložky..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Připravuji scénu..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Načítám rozhraní..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inicializuji engine..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Současně lze načíst pouze jeden soubor G-kódu. Přeskočen import {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Varování"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nelze otevřít žádný jiný soubor, když se načítá G kód. Přeskočen import {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Chyba"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Násobím a rozmisťuji objekty"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Umisťuji objekty"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Umisťuji objekt"
+msgid "Login failed"
+msgstr "Přihlášení selhalo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Nelze přečíst odpověď."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Nepodařilo se mi spustit nový proces přihlášení. Zkontrolujte, zda nějaký jiný již neběží."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Nelze se dostat na server účtu Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "Poskytnutý stav není správný."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Při autorizaci této aplikace zadejte požadovaná oprávnění."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Při pokusu o přihlášení se stalo něco neočekávaného, zkuste to znovu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Nepodařilo se mi spustit nový proces přihlášení. Zkontrolujte, zda nějaký jiný již neběží."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Nelze se dostat na server účtu Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Soubor již existuje"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Soubor <filename>{0}</filename> již existuje. Opravdu jej chcete přepsat?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Špatná cesta k souboru:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Tryska"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Nastavení byla změněna, aby odpovídala aktuální dostupnosti extruderů:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Nastavení aktualizováno"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(y) zakázány"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nepodařilo se exportovat profil do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Export profilu do <filename>{0}</filename> se nezdařil: Zapisovací zásuvný modul ohlásil chybu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Exportován profil do <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Export úspěšný"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Nepodařilo se importovat profil z <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Nemohu přidat profil z <filename>{0}</filename> před tím, než je přidána tiskárna."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "V souboru <filename>{0}</filename> není k dispozici žádný vlastní profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Tento profil <filename>{0}</filename> obsahuje nesprávná data, nemohl je importovat."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Import profilu z <filename>{0}</filename> se nezdařil:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Soubor {0} neobsahuje žádný platný profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profil {0} má neznámý typ souboru nebo je poškozen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Vlastní profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "V profilu chybí typ kvality."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Nepovedlo se přidat profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Nepodporovaný"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Výchozí"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Tryska"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Nastavení byla změněna, aby odpovídala aktuální dostupnosti extruderů:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Hledám nové umístění pro objekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Nastavení aktualizováno"
+msgid "Finding Location"
+msgstr "Hledám umístění"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nemohu najít lokaci na podložce pro všechny objekty"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(y) zakázány"
+msgid "Can't Find Location"
+msgstr "Nemohu najít umístění"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Skupina #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Přidat"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Dokončit"
+msgid "Close"
+msgstr "Zavřít"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Zrušit"
+msgid "Next"
+msgstr "Další"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Skupina #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Dokončit"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Vnější stěna"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Vnitřní stěna"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Skin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Výplň"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Výplň podpor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Rozhraní podpor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Podpora"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Límec"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Hlavní věž"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Pohyb"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retrakce"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Jiné"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Další"
+msgid "Add"
+msgstr "Přidat"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Zavřít"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asistent 3D modelu"
+msgid "Cancel"
+msgstr "Zrušit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p> Jeden nebo více 3D modelů se nemusí tisknout optimálně kvůli velikosti modelu a konfiguraci materiálu: </p>\n"
-"<p> {model_names} </p>\n"
-"<p> Zjistěte, jak zajistit nejlepší možnou kvalitu a spolehlivost tisku. </p>\n"
-"<p> <a href=\"https://ultimaker.com/3D-model-assistant\"> Zobrazit průvodce kvalitou tisku </a> </p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projektový soubor <filename>{0}</filename> obsahuje neznámý typ zařízení <message>{1}</message>. Nelze importovat zařízení. Místo toho budou importovány modely."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Otevřít soubor s projektem"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Soubor projektu <filename>{0}</filename>je neočekávaně nedostupný: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Nepovedlo se otevřít soubor projektu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Soubor projektu <filename>{0}</filename> je vytvořený profily, které jsou této verzi Ultimaker Cura neznámé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Doporučeno"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Vlastní"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Soubor 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Plugin 3MF Writer je poškozen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Nemáte oprávnění zapisovat do tohoto pracovního prostoru."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Chyba při zápisu 3mf file."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Soubor 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Soubor Cura Project 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Soubor AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Výška podložky byla snížena kvůli hodnotě nastavení „Sekvence tisku“, aby se zabránilo kolizi rámu s tištěnými modely."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Zálohy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Nastala chyba při nahrávání vaší zálohy."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Vytvářím zálohu..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Nastala chyba při vytváření zálohy."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Nahrávám vaši zálohu..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Vaše záloha byla úspěšně nahrána."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Záloha překračuje maximální povolenou velikost soubor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Nastala chyba při pokusu obnovit vaši zálohu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Spravovat zálohy"
+msgid "Build Volume"
+msgstr "Podložka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nelze slicovat s aktuálním materiálem, protože je nekompatibilní s vybraným strojem nebo konfigurací."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nelze vytvořit archiv ze složky s uživatelskými daty: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nelze slicovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "S aktuálním nastavením nelze slicovat. Následující nastavení obsahuje chyby: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nelze slicovat kvůli některým nastavení jednotlivých modelů. Následující nastavení obsahuje chyby na jednom nebo více modelech: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nelze slicovat, protože hlavní věž nebo primární pozice jsou neplatné."
+msgid "Backup"
+msgstr "Záloha"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nelze slicovat, protože jsou zde objekty asociované k zakázanému extruder %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Pokusil se obnovit zálohu Cura bez nutnosti správných dat nebo metadat."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Zkontrolujte nastavení a zda vaše modely:\n"
-"- Vejdou se na pracovní prostor\n"
-"- Jsou přiřazeny k povolenému extruderu\n"
-"- Nejsou nastavené jako modifikační sítě"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Pokusil se obnovit zálohu Cura, která je vyšší než aktuální verze."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Zpracovávám vrstvy"
+msgid "Multiplying and placing objects"
+msgstr "Násobím a rozmisťuji objekty"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nemohu načíst informace o aktualizaci."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Pro vaše {machine_name} mohou být k dispozici nové funkce nebo opravy chyb! Pokud ještě není v nejnovější verzi, doporučuje se aktualizovat firmware v tiskárně na verzi {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nový %s firmware je dostupný"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Jak aktualizovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aktualizovat firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Kompresovaný soubor G kódu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter nepodporuje textový mód."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Soubor G-kódu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Zpracovávám G kód"
+msgid "Placing Objects"
+msgstr "Umisťuji objekty"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Podrobnosti G kódu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Před odesláním souboru se ujistěte, že je g-kód vhodný pro vaši tiskárnu a konfiguraci tiskárny. Reprezentace g-kódu nemusí být přesná."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G soubor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter nepodporuje netextový mód."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Před exportem prosím připravte G-kód."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Obrázek JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Obrázek JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Obrázek PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Obrázek BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Obrázek GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profily Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Nastavení zařízení"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitorování"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Nastavení pro každý model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Konfigurovat nastavení pro každý model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post Processing"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifikovat G kód"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Příprava"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Náhled"
+msgid "Placing Object"
+msgstr "Umisťuji objekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Uložit na vyměnitelný disk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Uložit na vyměnitelný disk {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Nejsou k dispozici žádné formáty souborů pro zápis!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Ukládám na vyměnitelný disk <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Ukládám"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nemohu uložit na <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Při pokusu o zápis do zařízení {device} nebyl nalezen název souboru."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Nelze uložit na vyměnitelnou jednotku {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Ukládám na vyměnitelnou jednotku {0} jako {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Soubor uložen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Vysunout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Vysunout vyměnitelnou jednotku {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Vysunuto {0}. Nyní můžete bezpečně vyjmout jednotku."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Bezpečně vysunout hardware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Nepodařilo se vysunout {0}. Jednotku může používat jiný program."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Vyměnitelná jednotka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Když je aktivován síťový tisk, Cura přesně nezobrazuje vrstvy."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Pohled simulace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Nic není zobrazeno, nejdříve musíte slicovat."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Žádné vrstvy k zobrazení"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Znovu nezobrazovat tuto zprávu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Pohled vrstev"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Váš model není rozmanitý. Zvýrazněné oblasti indikují buď chybějící, či vedlejší povrch."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Chyby modelu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Pevný pohled"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blokovač podpor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Vytvořit prostor ve kterém nejsou tištěny podpory."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Chcete synchronizovat materiál a softwarové balíčky s vaším účtem?"
+msgid "AMF File"
+msgstr "Soubor AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Zjištěny změny z vašeho účtu Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Soubor G-kódu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchronizovat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Aktualizovat firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronizuji..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Soubor X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Odmítnout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Přijmout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Licenční ujednání zásuvného modulu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Odmítnout a odstranit z účtu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Nepovedlo se stáhnout {} zásuvných modulů"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchronizuji..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Zjištěny změny z vašeho účtu Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Než se změny projeví, musíte ukončit a restartovat {}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Nepovedlo se stáhnout {} zásuvných modulů"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Chcete synchronizovat materiál a softwarové balíčky s vaším účtem?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchronizovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Nastavení pro každý model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "gITF binární soubor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Konfigurovat nastavení pro každý model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "gITF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post Processing"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifikovat G kód"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Kompresovaný COLLADA Digital Asset Exchenge"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nelze slicovat s aktuálním materiálem, protože je nekompatibilní s vybraným strojem nebo konfigurací."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Balíček ve formátu Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Nelze slicovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Nemohu zapsat do UFP souboru:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "S aktuálním nastavením nelze slicovat. Následující nastavení obsahuje chyby: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Vyrovnat podložku"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nelze slicovat kvůli některým nastavení jednotlivých modelů. Následující nastavení obsahuje chyby na jednom nebo více modelech: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Vybrat vylepšení"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nelze slicovat, protože hlavní věž nebo primární pozice jsou neplatné."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Tisknout přes cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nelze slicovat, protože jsou zde objekty asociované k zakázanému extruder %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Tisknout přes cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Zkontrolujte nastavení a zda vaše modely:\n"
+"- Vejdou se na pracovní prostor\n"
+"- Jsou přiřazeny k povolenému extruderu\n"
+"- Nejsou nastavené jako modifikační sítě"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Připojen přes cloud"
+msgid "Processing Layers"
+msgstr "Zpracovávám vrstvy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informace"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB tisk"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Tisk přes USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Tisk přes USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Připojeno přes USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Probíhá tisk přes USB, uzavření Cura tento tisk zastaví. Jsi si jistá?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Tisk stále probíhá. Cura nemůže spustit další tisk přes USB, dokud není předchozí tisk dokončen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Probíhá tisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Připojit přes síť"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
@@ -1349,13 +1018,13 @@ msgstr[0] "Z vašeho Ultimaker účtu byla detekována nová tiskárna"
 msgstr[1] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny"
 msgstr[2] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1364,12 +1033,12 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
@@ -1377,7 +1046,7 @@ msgstr[0] "Pro tuto tiskárnu není připojení přes cloud dostupné"
 msgstr[1] "Pro tyto tiskárny není připojení přes cloud dostupné"
 msgstr[2] "Pro tyto tiskárny není připojení přes cloud dostupné"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
@@ -1385,52 +1054,52 @@ msgstr[0] "Tato tiskárna není napojena na Digital Factory:"
 msgstr[1] "Tyto tiskárny nejsou napojeny na Digital Factory:"
 msgstr[2] "Tyto tiskárny nejsou napojeny na Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Zachovat konfiguraci tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Odstranit tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Odstranit tiskárny?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1443,869 +1112,1011 @@ msgstr[0] ""
 msgstr[1] ""
 msgstr[2] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Odesílejte a sledujte tiskové úlohy odkudkoli pomocí účtu Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Tisknout přes cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Připojit se k Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Tisknout přes cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Začínáme"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Připojen přes cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Pokoušíte se připojit k tiskárně, na které není spuštěna aplikace Ultimaker Connect. Aktualizujte tiskárnu na nejnovější firmware."
+msgid "tomorrow"
+msgstr "zítra"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Aktualizujte vaší tiskárnu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "dnes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura zjistil materiálové profily, které ještě nebyly nainstalovány na hostitelské tiskárně skupiny {0}."
+msgid "Sending Print Job"
+msgstr "Odesílám tiskovou úlohu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Odesílání materiálů do tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Nahrávám tiskovou úlohu do tiskárny."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Pokoušíte se připojit k {0}, ale není hostitelem skupiny. Webovou stránku můžete navštívit a nakonfigurovat ji jako skupinového hostitele."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Není hostem skupiny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Konfigurovat skupinu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Odesílejte a sledujte tiskové úlohy odkudkoli pomocí účtu Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Připojit se k Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Začínáme"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Počkejte, až bude odeslána aktuální úloha."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Chyba tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Nemohu nahrát data do tiskárny."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Chyba sítě"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Odesílám tiskovou úlohu"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura zjistil materiálové profily, které ještě nebyly nainstalovány na hostitelské tiskárně skupiny {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Nahrávám tiskovou úlohu do tiskárny."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Odesílání materiálů do tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Tisková úloha byla úspěšně odeslána do tiskárny."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Data poslána"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Pokoušíte se připojit k tiskárně, na které není spuštěna aplikace Ultimaker Connect. Aktualizujte tiskárnu na nejnovější firmware."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Aktualizujte vaší tiskárnu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Tisk přes síť"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Tisk přes síť"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Připojeno přes síť"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Připojit přes síť"
+msgid "Select upgrades"
+msgstr "Vybrat vylepšení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "zítra"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Vyrovnat podložku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "dnes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Doporučeno"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB tisk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Vlastní"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Tisk přes USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projektový soubor <filename>{0}</filename> obsahuje neznámý typ zařízení <message>{1}</message>. Nelze importovat zařízení. Místo toho budou importovány modely."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Tisk přes USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Otevřít soubor s projektem"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Připojeno přes USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Soubor projektu <filename>{0}</filename>je neočekávaně nedostupný: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Probíhá tisk přes USB, uzavření Cura tento tisk zastaví. Jsi si jistá?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Nepovedlo se otevřít soubor projektu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Tisk stále probíhá. Cura nemůže spustit další tisk přes USB, dokud není předchozí tisk dokončen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Probíhá tisk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Soubor projektu <filename>{0}</filename> je vytvořený profily, které jsou této verzi Ultimaker Cura neznámé."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Soubor X3D"
+msgid "3MF File"
+msgstr "Soubor 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Rentgenový pohled"
+msgid "Compressed G-code File"
+msgstr "Kompresovaný soubor G kódu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Některé věci mohou být v tomto tisku problematické. Kliknutím zobrazíte tipy pro úpravy."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter nepodporuje textový mód."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Otevřit projekt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asistent 3D modelu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Aktualizovat existující"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p> Jeden nebo více 3D modelů se nemusí tisknout optimálně kvůli velikosti modelu a konfiguraci materiálu: </p>\n"
+"<p> {model_names} </p>\n"
+"<p> Zjistěte, jak zajistit nejlepší možnou kvalitu a spolehlivost tisku. </p>\n"
+"<p> <a href=\"https://ultimaker.com/3D-model-assistant\"> Zobrazit průvodce kvalitou tisku </a> </p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Vytvořit nový"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nemohu načíst informace o aktualizaci."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Souhrn - Projekt Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Pro vaše {machine_name} mohou být k dispozici nové funkce nebo opravy chyb! Pokud ještě není v nejnovější verzi, doporučuje se aktualizovat firmware v tiskárně na verzi {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Nastavení tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nový %s firmware je dostupný"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Jak by měl být problém v zařízení vyřešen?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Jak aktualizovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G soubor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Skupina tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Zpracovávám G kód"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Nastavení profilu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Podrobnosti G kódu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Před odesláním souboru se ujistěte, že je g-kód vhodný pro vaši tiskárnu a konfiguraci tiskárny. Reprezentace g-kódu nemusí být přesná."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blokovač podpor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Jak by měl být problém v profilu vyřešen?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Vytvořit prostor ve kterém nejsou tištěny podpory."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Název"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Záměr"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Není v profilu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "gITF binární soubor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 přepsání"
-msgstr[1] "%1 přepsání"
-msgstr[2] "%1 přepsání"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "gITF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivát z"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 override"
-msgstr[1] "%1, %2 overrides"
-msgstr[2] "%1, %2 overrides"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Kompresovaný COLLADA Digital Asset Exchenge"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Nastavení materiálu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Balíček ve formátu Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Jak by měl být problém v materiálu vyřešen?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profily Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Nastavení zobrazení"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Příprava"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mód"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitorování"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Viditelná zařízení:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Rentgenový pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 z %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Chyba při zápisu 3mf file."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Nahrání projektu vymaže všechny modely na podložce."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Soubor 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Otevřít"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Soubor Cura Project 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Chcete více?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Plugin 3MF Writer je poškozen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Zálohovat nyní"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Nemáte oprávnění zapisovat do tohoto pracovního prostoru."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatické zálohy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automaticky vytvořte zálohu každý den, kdy je spuštěna Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Náhled"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Obnovit"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Pohled vrstev"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Odstranit zálohu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Když je aktivován síťový tisk, Cura přesně nezobrazuje vrstvy."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Opravdu chcete tuto zálohu smazat? To nelze vrátit zpět."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Pohled simulace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Obnovit zálohu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Nic není zobrazeno, nejdříve musíte slicovat."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Před obnovením zálohy budete muset restartovat Curu. Chcete nyní Curu zavřít?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Žádné vrstvy k zobrazení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura verze"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Znovu nezobrazovat tuto zprávu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Zařízení"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Nastavení zařízení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiály"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Pevný pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profily"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Zásuvné moduly"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura zálohy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Moje zálohy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Nemohu zapsat do UFP souboru:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Momentálně nemáte žádné zálohy. Pomocí tlačítka 'Zálohovat nyní' vytvořte."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter nepodporuje netextový mód."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Během fáze náhledu budete omezeni na 5 viditelných záloh. Chcete-li zobrazit starší, odstraňte zálohu."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Před exportem prosím připravte G-kód."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Zálohovat a synchronizovat vaše nastavení Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Obrázek JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Přihlásit se"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Obrázek JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Obrázek PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Obrázek BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Obrázek GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Nastala chyba při pokusu obnovit vaši zálohu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Zálohy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Nastala chyba při nahrávání vaší zálohy."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Vytvářím zálohu..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Nastala chyba při vytváření zálohy."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Nahrávám vaši zálohu..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Vaše záloha byla úspěšně nahrána."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Záloha překračuje maximální povolenou velikost soubor."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Spravovat zálohy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Aktualizovat firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Firmware je software běžící přímo na vaší 3D tiskárně. Tento firmware řídí krokové motory, reguluje teplotu a v konečném důsledku zajišťuje vaši práci tiskárny."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Dodávání firmwaru s novými tiskárnami funguje, ale nové verze mají obvykle více funkcí a vylepšení."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automaticky aktualizovat firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Nahrát vlastní firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Firmware nelze aktualizovat, protože není spojeno s tiskárnou."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Firmware nelze aktualizovat, protože připojení k tiskárně nepodporuje aktualizaci firmwaru."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Vybrat vlastní firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Aktualizace firmwaru"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Aktualizuji firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Aktualizace firmwaru kompletní."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Aktualizace firmwaru selhala kvůli neznámému problému."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Aktualizace firmwaru selhala kvůli chybě v komunikaci."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Aktualizace firmwaru selhala kvůli chybě vstupu / výstupu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Aktualizace firmwaru selhala kvůli chybějícímu firmwaru."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Konvertovat obrázek.."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Obchod"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Maximální vzdálenost každého pixelu od „základny“."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Pro instalaci balíčku musíte přijmout licenční ujednání"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Výška (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Změny z vašeho účtu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Výška základny od podložky v milimetrech."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Schovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Základna (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Další"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Šířka podložky v milimetrech."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Následující balíčky byly přidány:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Šířka (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Následující balíčky nelze nainstalovat z důvodu nekompatibilní verze Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Hloubka podložky v milimetrech"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Potvrdit odinstalaci"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Hloubka (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Odinstalujete materiály a / nebo profily, které se stále používají. Potvrzením resetujete následující materiály / profily na výchozí hodnoty."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "U litofanů by tmavé pixely měly odpovídat silnějším místům, aby blokovaly více světla procházejícího. Pro výškové mapy znamenají světlejší pixely vyšší terén, takže světlejší pixely by měly odpovídat silnějším umístěním v generovaném 3D modelu."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiály"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Tmavější je vyšší"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profily"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Světlejší je vyšší"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Potvrdit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Pro litofany je k dispozici jednoduchý logaritmický model pro průsvitnost. U výškových map odpovídají hodnoty pixelů lineárně výškám."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Nelze se připojit k databázi balíčku Cura. Zkontrolujte připojení."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineární"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Soubory od komunity"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Průsvitnost"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Komunitní zásuvné moduly"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Procento světla pronikajícího do tisku o tloušťce 1 milimetr. Snížení této hodnoty zvyšuje kontrast v tmavých oblastech a snižuje kontrast ve světlých oblastech obrazu."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Obecné materiály"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm propustnost (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Verze"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Množství vyhlazení, které se použije na obrázek."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Naposledy aktualizování"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Vyhlazování"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Značka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Ke stažení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Tiskárna"
+msgid "Installed plugins"
+msgstr "Nainstalovaná rozšíření"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nastavení trysky"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Žádné rozšíření nebylo nainstalováno."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Velikost trysky"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Nainstalované materiály"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Žádný materiál nebyl nainstalován."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatibilní průměr materiálu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Zabalená rozšíření"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "X offset trysky"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Zabalené materiály"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Y offset trysky"
+msgid "Website"
+msgstr "Webová stránka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Číslo chladícího větráku"
+msgid "Email"
+msgstr "Email"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Počáteční G-kód extuderu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Přihlaste se, abyste získali ověřené pluginy a materiály pro Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Ukončující G-kód extuderu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Přihlásit se"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Nastavení tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Načítám balíčky..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Šířka)"
+msgid "Compatibility"
+msgstr "Kompatibilita"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Hloubka)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Zařízení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Výška)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Podložka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Tvar tiskové podložky"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Podpora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Počátek ve středu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Kvalita"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Topná podložka"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Technický datasheet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Vyhřívaný objem sestavení"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Datasheet bezpečnosti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Varianta G kódu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Zásady tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Nastavení tiskové hlavy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Webová stránka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Zásuvné moduly"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiály"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Nainstalování"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Přejít na webový obchod"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Výška rámu tiskárny"
+msgid "Will install upon restarting"
+msgstr "Nainstaluje se po restartu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Počet extrůderů"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Aktualizace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Počáteční G kód"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Aktualizuji"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Ukončující G kód"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Aktualizování"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Zkontrolujte, zda má tiskárna připojení:\n"
-"- Zkontrolujte, zda je tiskárna zapnutá.\n"
-"- Zkontrolujte, zda je tiskárna připojena k síti.\n"
-"- Zkontrolujte, zda jste přihlášeni k objevování tiskáren připojených k cloudu."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "Pro aktualizace je potřeba se <a href='%1'>přihlásit</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Odinstalace"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Nainstalováno"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "K instalaci nebo aktualizaci je vyžadováno <a href='%1'>přihlášení</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Koupit cívky materiálu</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Hledat materiály"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Připojte tiskárnu k síti."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Než se změny v balíčcích projeví, budete muset restartovat Curu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Zobrazit online manuály"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Ukončit %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Zpět"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Nainstalovat"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Typ síťového modelu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Normální model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Tisknout jako podporu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Upravte nastavení překrývání"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Nepodporovat překrývání"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Pouze síť výplně"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Síť řezu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Vybrat nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Vybrat nastavení k přizpůsobení pro tento model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrovat..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Zobrazit vše"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Zásuvný balíček Post Processing"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Skripty Post Processingu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Přidat skript"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Změnít aktivní post-processing skripty."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
@@ -2313,1298 +2124,1486 @@ msgstr[0] "Následují skript je aktivní:"
 msgstr[1] "Následují skripty jsou aktivní:"
 msgstr[2] "Následují skripty jsou aktivní:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Barevné schéma"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Barva materiálu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Typ úsečky"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Rychlost"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Tloušťka vrstvy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Mód kompatibility"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Cesty"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Pomocníci"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Shell"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Výplň"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Zobrazit jen vrchní vrstvy"
+msgid "Queued"
+msgstr "Zařazeno do fronty"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Zobrazit 5 podrobných vrstev nahoře"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Spravovat v prohlížeči"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Nahoře / Dole"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Ve frontě nejsou žádné tiskové úlohy. Slicujte a odesláním úlohy jednu přidejte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Vnitřní stěna"
+msgid "Print jobs"
+msgstr "Tiskové úlohy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min"
+msgid "Total print time"
+msgstr "Celkový čas tisknutí"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max"
+msgid "Waiting for"
+msgstr "Čekám na"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Další informace o anonymním shromažďování údajů"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu. Níže uvádíme příklad všech sdílených dat:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nechci posílat anonymní data"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Povolit zasílání anonymních dat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Zpět"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Kompatibilita"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Zařízení"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Podložka"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Podpora"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kvalita"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technický datasheet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Datasheet bezpečnosti"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Zásady tisku"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Webová stránka"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Nainstalováno"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "K instalaci nebo aktualizaci je vyžadováno <a href='%1'>přihlášení</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Koupit cívky materiálu</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualizace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualizuji"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aktualizování"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Přejít na webový obchod"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Hledat materiály"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Než se změny v balíčcích projeví, budete muset restartovat Curu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Ukončit %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Zásuvné moduly"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiály"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Nainstalování"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Nainstaluje se po restartu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Pro aktualizace je potřeba se <a href='%1'>přihlásit</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Odinstalace"
+msgid "Configuration Changes"
+msgstr "Změny konfigurace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Nainstalovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Změny z vašeho účtu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Schovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Další"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Následující balíčky byly přidány:"
+msgid "Override"
+msgstr "Override"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Následující balíčky nelze nainstalovat z důvodu nekompatibilní verze Cura:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Potvrdit odinstalaci"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Odinstalujete materiály a / nebo profily, které se stále používají. Potvrzením resetujete následující materiály / profily na výchozí hodnoty."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiály"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profily"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Potvrdit"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:"
+msgstr[1] "Přiřazená tiskárna %1 vyžaduje následující změny akonfigurace:"
+msgstr[2] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Pro instalaci balíčku musíte přijmout licenční ujednání"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Tiskárna %1 je přiřazena, ale úloha obsahuje neznámou konfiguraci materiálu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Webová stránka"
+msgid "Change material %1 from %2 to %3."
+msgstr "Změnit materiál %1 z %2 na %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Načíst %3 jako materiál %1 (Toho nemůže být přepsáno)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Verze"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Změnit jádro tisku %1 z %2 na %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Naposledy aktualizování"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Změnit podložku na %1 (Toto nemůže být přepsáno)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Značka"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Přepsání použije zadaná nastavení s existující konfigurací tiskárny. To může vést k selhání tisku."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Ke stažení"
+msgid "Glass"
+msgstr "Sklo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Soubory od komunity"
+msgid "Aluminum"
+msgstr "Hliník"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Komunitní zásuvné moduly"
+msgid "Unavailable printer"
+msgstr "Nedostupná tiskárna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Obecné materiály"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nelze se připojit k databázi balíčku Cura. Zkontrolujte připojení."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Nainstalovaná rozšíření"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Žádné rozšíření nebylo nainstalováno."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Nainstalované materiály"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Žádný materiál nebyl nainstalován."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Zabalená rozšíření"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Zabalené materiály"
+msgid "First available"
+msgstr "První dostupný"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Načítám balíčky..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Přihlaste se, abyste získali ověřené pluginy a materiály pro Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Obchod"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Vyrovnávání podložky"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Chcete-li se ujistit, že vaše výtisky vyjdou skvěle, můžete nyní sestavení své podložku. Když kliknete na „Přesunout na další pozici“, tryska se přesune do různých poloh, které lze upravit."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Pro každou pozici; vložte kousek papíru pod trysku a upravte výšku tiskové desky. Výška desky pro sestavení tisku je správná, když je papír lehce uchopen špičkou trysky."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Spustit vyrovnání položky"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Přesunout na další pozici"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Vyberte prosím všechny upgrady provedené v tomto originálu Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Vyhřívaná podložka (Oficiální kit, nebo vytvořená)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Aktualizujte firmware tiskárny a spravujte frontu vzdáleně."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Připojte se k síťové tiskárně"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Chcete-li tisknout přímo na tiskárně prostřednictvím sítě, zkontrolujte, zda je tiskárna připojena k síti pomocí síťového kabelu nebo připojením tiskárny k síti WIFI. Pokud nepřipojíte Curu k tiskárně, můžete stále používat jednotku USB k přenosu souborů g-kódu do vaší tiskárny."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Vyberte svou tiskárnu z nabídky níže:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Upravit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Odstranit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aktualizovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Pokud vaše tiskárna není uvedena, přečtěte si <a href='%1'> průvodce řešením problémů se síťovým tiskem </a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Typ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Verze firmwaru"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Tato tiskárna není nastavena tak, aby hostovala skupinu tiskáren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Tato tiskárna je hostitelem skupiny tiskáren %1."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Tiskárna na této adrese dosud neodpověděla."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Připojit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Špatná IP adresa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Prosím zadejte validní IP adresu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresa tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Vložte IP adresu vaší tiskárny na síti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Změny konfigurace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Override"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:"
-msgstr[1] "Přiřazená tiskárna %1 vyžaduje následující změny akonfigurace:"
-msgstr[2] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Tiskárna %1 je přiřazena, ale úloha obsahuje neznámou konfiguraci materiálu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Změnit materiál %1 z %2 na %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Načíst %3 jako materiál %1 (Toho nemůže být přepsáno)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Změnit jádro tisku %1 z %2 na %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Změnit podložku na %1 (Toto nemůže být přepsáno)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Přepsání použije zadaná nastavení s existující konfigurací tiskárny. To může vést k selhání tisku."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Tisk přes síť"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Sklo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Tisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Hliník"
+msgid "Printer selection"
+msgstr "Výběr tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Přesunout nahoru"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Odstranit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Obnovit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pozastavuji..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Obnovuji..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pozastavit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Ruším..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Zrušit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Doopravdy chcete posunout %1 na začátek fronty?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Přesunout tiskovou úlohu nahoru"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Doopravdy chcete odstranit %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Odstranit tiskovou úlohu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Doopravdy chcete zrušit %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Zrušit tisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Zrušeno"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Dokončeno"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Připravuji..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Ruším..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pozastavuji..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pozastaveno"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Obnovuji..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Akce vyžadována"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Dokončuji %1 z %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Spravovat tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Aktualizujte firmware tiskárny a spravujte frontu vzdáleně."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Načítám..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Nedostupný"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nedostupný"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Čekám"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Bez názvu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonymní"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Jsou nutné změny v nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Podrobnosti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Nedostupná tiskárna"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Vyberte prosím všechny upgrady provedené v tomto originálu Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "První dostupný"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Vyhřívaná podložka (Oficiální kit, nebo vytvořená)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Zrušeno"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Vyrovnávání podložky"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Dokončeno"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Chcete-li se ujistit, že vaše výtisky vyjdou skvěle, můžete nyní sestavení své podložku. Když kliknete na „Přesunout na další pozici“, tryska se přesune do různých poloh, které lze upravit."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Připravuji..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Pro každou pozici; vložte kousek papíru pod trysku a upravte výšku tiskové desky. Výška desky pro sestavení tisku je správná, když je papír lehce uchopen špičkou trysky."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Ruším..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Spustit vyrovnání položky"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pozastavuji..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Přesunout na další pozici"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pozastaveno"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Otevřit projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Obnovuji..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Aktualizovat existující"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Akce vyžadována"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Vytvořit nový"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Dokončuji %1 z %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Souhrn - Projekt Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Nastavení tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Jak by měl být problém v zařízení vyřešen?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Skupina tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Nastavení profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Jak by měl být problém v profilu vyřešen?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Název"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Záměr"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Není v profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 přepsání"
+msgstr[1] "%1 přepsání"
+msgstr[2] "%1 přepsání"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivát z"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 override"
+msgstr[1] "%1, %2 overrides"
+msgstr[2] "%1, %2 overrides"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Nastavení materiálu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Jak by měl být problém v materiálu vyřešen?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Nastavení zobrazení"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mód"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Viditelná zařízení:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 z %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Nahrání projektu vymaže všechny modely na podložce."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Otevřít"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Některé věci mohou být v tomto tisku problematické. Kliknutím zobrazíte tipy pro úpravy."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Zkontrolujte, zda má tiskárna připojení:\n"
+"- Zkontrolujte, zda je tiskárna zapnutá.\n"
+"- Zkontrolujte, zda je tiskárna připojena k síti.\n"
+"- Zkontrolujte, zda jste přihlášeni k objevování tiskáren připojených k cloudu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Připojte tiskárnu k síti."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Zobrazit online manuály"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Další informace o anonymním shromažďování údajů"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu. Níže uvádíme příklad všech sdílených dat:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nechci posílat anonymní data"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Povolit zasílání anonymních dat"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Zařazeno do fronty"
+msgid "Color scheme"
+msgstr "Barevné schéma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Spravovat v prohlížeči"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Barva materiálu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Typ úsečky"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Rychlost"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Ve frontě nejsou žádné tiskové úlohy. Slicujte a odesláním úlohy jednu přidejte."
+msgid "Compatibility Mode"
+msgstr "Mód kompatibility"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Tiskové úlohy"
+msgid "Travels"
+msgstr "Cesty"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Celkový čas tisknutí"
+msgid "Helpers"
+msgstr "Pomocníci"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Čekám na"
+msgid "Shell"
+msgstr "Shell"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Tisk přes síť"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Výplň"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Tisk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Výběr tiskárny"
+msgid "Only Show Top Layers"
+msgstr "Zobrazit jen vrchní vrstvy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Přihlásit se"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Zobrazit 5 podrobných vrstev nahoře"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Váš klíč k propojenému 3D tisku"
+msgid "Top / Bottom"
+msgstr "Nahoře / Dole"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů\n"
-"- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli\n"
-"- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Vnitřní stěna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Vytvořit účet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Kontroluji..."
+msgid "max"
+msgstr "max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nastavení trysky"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Účet byl synchronizován"
+msgid "Nozzle size"
+msgstr "Velikost trysky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Nastala chyba..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Nainstalujte čekající aktualizace"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Kompatibilní průměr materiálu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Zkontrolovat aktualizace pro účet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "X offset trysky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Poslední aktualizace: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Y offset trysky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker Account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Číslo chladícího větráku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Odhlásit se"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Počáteční G-kód extuderu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Ukončující G-kód extuderu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Tiskárna"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Nastavení tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Žádný odhad času není dostupný"
+msgid "X (Width)"
+msgstr "X (Šířka)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Žádná cena není dostupná"
+msgid "Y (Depth)"
+msgstr "Y (Hloubka)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Náhled"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Výška)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Odhad času"
+msgid "Build plate shape"
+msgstr "Tvar tiskové podložky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Odhad materiálu"
+msgid "Origin at center"
+msgstr "Počátek ve středu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Topná podložka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Vyhřívaný objem sestavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Slicuji..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Varianta G kódu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nelze slicovat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Nastavení tiskové hlavy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Výška rámu tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Počet extrůderů"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Počáteční G kód"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Ukončující G kód"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Konvertovat obrázek.."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Maximální vzdálenost každého pixelu od „základny“."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Výška (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Výška základny od podložky v milimetrech."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Základna (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Šířka podložky v milimetrech."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Šířka (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Hloubka podložky v milimetrech"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Hloubka (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "U litofanů by tmavé pixely měly odpovídat silnějším místům, aby blokovaly více světla procházejícího. Pro výškové mapy znamenají světlejší pixely vyšší terén, takže světlejší pixely by měly odpovídat silnějším umístěním v generovaném 3D modelu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Tmavější je vyšší"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Světlejší je vyšší"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Pro litofany je k dispozici jednoduchý logaritmický model pro průsvitnost. U výškových map odpovídají hodnoty pixelů lineárně výškám."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineární"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Průsvitnost"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Procento světla pronikajícího do tisku o tloušťce 1 milimetr. Snížení této hodnoty zvyšuje kontrast v tmavých oblastech a snižuje kontrast ve světlých oblastech obrazu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm propustnost (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Množství vyhlazení, které se použije na obrázek."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Vyhlazování"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Moje zálohy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Momentálně nemáte žádné zálohy. Pomocí tlačítka 'Zálohovat nyní' vytvořte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Během fáze náhledu budete omezeni na 5 viditelných záloh. Chcete-li zobrazit starší, odstraňte zálohu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Zálohovat a synchronizovat vaše nastavení Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Zpracovává se"
+msgid "Want more?"
+msgstr "Chcete více?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slicovat"
+msgid "Backup Now"
+msgstr "Zálohovat nyní"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Začít proces slicování"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatické zálohy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automaticky vytvořte zálohu každý den, kdy je spuštěna Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura verze"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Zařízení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiály"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profily"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Zásuvné moduly"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Zrušit"
+msgid "Restore"
+msgstr "Obnovit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Zobrazit online průvodce řešením problémů"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Odstranit zálohu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Přepnout zobrazení na celou obrazovku"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Opravdu chcete tuto zálohu smazat? To nelze vrátit zpět."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Ukončit zobrazení na celou obrazovku"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Obnovit zálohu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Vrátit"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Před obnovením zálohy budete muset restartovat Curu. Chcete nyní Curu zavřít?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Znovu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura zálohy"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiál"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Oblíbené"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Obecné"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Soubor"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Uložit projekt..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportovat..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Ukončit"
+msgid "Export Selection..."
+msgstr "Výběr exportu..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D Pohled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Otevřít &Poslední"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Vybrat konfiguraci"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Vlastní"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Tiskárna"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Povoleno"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiál"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "S touto kombinací materiálu pro lepší adhezi použijte lepidlo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Tato konfigurace není k dispozici, protože %1 nebyl rozpoznán. Navštivte prosím %2 a stáhněte si správný materiálový profil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Obchod"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Načítání dostupných konfigurací z tiskárny ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Konfigurace nejsou k dispozici, protože je tiskárna odpojena."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Po&hled"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Přední pohled"
+msgid "&Camera position"
+msgstr "Pozice &kamery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Pohled ze shora"
+msgid "Camera view"
+msgstr "Pohled kamery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Pohled z pravé strany"
+msgid "Perspective"
+msgstr "Perspektiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Pohled z pravé strany"
+msgid "Orthographic"
+msgstr "Ortografický"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Konfigurovat Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "Pod&ložka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "Přidat t&iskárnu..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Tiskárny s povolenou sítí"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Spravovat &tiskárny..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokální tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Spravovat materiály..."
+msgid "Visible Settings"
+msgstr "Viditelná nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Přidat více materiálů z obchodu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Aktualizovat profil s aktuálními nastaveními/přepsáními"
+msgid "Collapse All Categories"
+msgstr "Sbalit všechny kategorie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "Smazat aktuální &změny"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Spravovat nastavení viditelnosti ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Vytvořit profil z aktuálního nastavení/přepsání."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Nasta&vení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Spravovat profily..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Tiskárna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Zobrazit online &dokumentaci"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiál"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Nahlásit &chybu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Nastavit jako aktivní extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Co je nového"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Povolit extuder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Více..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Zakázat Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Smazat vybraný model"
-msgstr[1] "Smazat vybrané modely"
-msgstr[2] "Smazat vybrané modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centrovat vybraný model"
-msgstr[1] "Centrovat vybrané modely"
-msgstr[2] "Centrovat vybrané modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Tisknout vybraný model pomocí:"
+msgstr[1] "Tisknout vybrané modely pomocí:"
+msgstr[2] "Tisknout vybrané modely pomocí:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Násobit vybraný model"
-msgstr[1] "Násobit vybrané modely"
-msgstr[2] "Násobit vybrané modely"
+msgstr[1] "Násobit vybrané modele"
+msgstr[2] "Násobit vybrané modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Odstranit model"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Počet kopií"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "&Centerovat model na podložce"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Sesk&upit modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Vlastní profily"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Rozdělit modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Zrušit aktuální změny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Spo&jit modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "Náso&bení modelu..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Některé hodnoty nastavení / přepsání se liší od hodnot uložených v profilu.\n"
+"\n"
+"Klepnutím otevřete správce profilů."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Vybrat všechny modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Zap"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Vyčistit podložku"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Vyp"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Znovu načíst všechny modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimentální"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Uspořádejte všechny modely do všechpodložek"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Doporučeno"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Uspořádat všechny modely"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Vlastní"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Uspořádat selekci"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Nastavení tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Resetovat všechny pozice modelů"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Nastavení tisku zakázáno. Soubor G-kódu nelze změnit."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Resetovat všechny transformace modelů"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Postupná výplň"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Otevřít soubor(y)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Postupná výplň postupně zvyšuje množství výplně směrem nahoru."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nový projekt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profily"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Zobrazit složku s konfigurací"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Upravili jste některá nastavení profilu. Pokud je chcete změnit, přejděte do uživatelského režimu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Konfigurovat viditelnost nastavení..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Podpora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "Mark&et"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Vytvořte struktury pro podporu částí modelu, které mají přesahy. Bez těchto struktur by se takové části během tisku zhroutily."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Tento balíček bude nainstalován po restartování."
+msgid "Adhesion"
+msgstr "Adheze"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Obecné"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Umožňuje tisk okraje nebo voru. Tímto způsobem se kolem nebo pod objekt přidá plochá oblast, kterou lze snadno odříznout."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Nastavení"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Neexistuje žádný profil %1 pro konfiguraci v extruderu %2. Místo toho bude použit výchozí záměr"
+msgstr[1] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
+msgstr[2] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profily"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktivní tisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Zavírám %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Název úlohy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Doopravdy chcete zavřít %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Čas tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Předpokládaný zbývající čas"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Otevřít soubor(y)"
+msgid "Discard or Keep changes"
+msgstr "Smazat nebo nechat změny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Nainstalovat balíček"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Otevřít Soubor(y)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Nastavení profilu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Ve vybraných souborech jsme našli jeden nebo více souborů G-kódu. Naraz můžete otevřít pouze jeden soubor G-kódu. Pokud chcete otevřít soubor G-Code, vyberte pouze jeden."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Aktuální změny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Přidat tiskárnu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Vždy se zeptat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Co je nového"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Smazat a už se nikdy neptat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Nechat a už se nikdy neptat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Smazat změny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Zanechat změny"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "O %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "verze: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Komplexní řešení pro 3D tisk z taveného filamentu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3613,2004 +3612,2105 @@ msgstr ""
 "Cura vyvíjí Ultimaker B.V. ve spolupráci s komunitou.\n"
 "Cura hrdě používá následující open source projekty:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafické uživatelské prostředí"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Aplikační framework"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generátor G kódu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Meziprocesní komunikační knihovna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programovací jazyk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI framework"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Propojení GUI frameworku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Binding knihovna C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formát výměny dat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Podpůrná knihovna pro vědecké výpočty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Podpůrný knihovna pro rychlejší matematické výpočty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Podpůrná knihovna pro práci se soubory STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Podpůrná knihovna pro manipulaci s planárními objekty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Podpůrná knihovna pro manipulaci s trojúhelníkovými sítěmi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Podpůrná knihovna pro manipulaci s 3MF soubory"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Podpůrná knihovna pro metadata souborů a streaming"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Knihovna pro sériovou komunikaci"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Knihovna ZeroConf discovery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Knihovna pro výstřižky z mnohoúhelníků"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Kontrola statických typů pro Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Základní certifikáty pro validaci důvěryhodnosti SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Chyba v Python trackovací knihovně"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Font"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ikony SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux cross-distribution application deployment"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Otevřít soubor s projektem"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Toto je soubor projektu Cura. Chcete jej otevřít jako projekt nebo importovat z něj modely?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Pamatuj si moji volbu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Otevřít jako projekt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importovat modely"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Smazat nebo nechat změny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Nastavení profilu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Aktuální změny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Vždy se zeptat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Smazat a už se nikdy neptat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Nechat a už se nikdy neptat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Smazat změny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Zanechat změny"
+msgid "Open file(s)"
+msgstr "Otevřít soubor(y)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Ve vybraných souborech jsme našli jeden nebo více projektových souborů. Naraz můžete otevřít pouze jeden soubor projektu. Doporučujeme importovat pouze modely z těchto souborů. Chtěli byste pokračovat?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importovat vše jako modely"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Uložit projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & materiál"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiál"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Nezobrazovat souhrn projektu při uložení znovu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Uložit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Tisknout vybraný model pomocí %1"
-msgstr[1] "Tisknout vybraný model pomocí %1"
-msgstr[2] "Tisknout vybraný model pomocí %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Otevřít soubor s projektem"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Toto je soubor projektu Cura. Chcete jej otevřít jako projekt nebo importovat z něj modely?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Pamatuj si moji volbu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Otevřít jako projekt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importovat modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Bez názvu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Soubor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Vítejte v Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Upr&avit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Po&hled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Začínáme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Nasta&vení"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Prázdné"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "D&oplňky"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Pomožte nám zlepšovat Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&reference"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu, včetně:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Po&moc"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Typy zařízení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nový projekt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Použití materiálu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Počet sliců"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Obchod"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Nastavení tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Data shromážděná společností Ultimaker Cura nebudou obsahovat žádné osobní údaje."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Více informací"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Tato konfigurace není k dispozici, protože %1 nebyl rozpoznán. Navštivte prosím %2 a stáhněte si správný materiálový profil."
+msgid "Add printer by IP address"
+msgstr "Přidat tiskárnu podle IP adresy"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Zadejte IP adresu vaší tiskárny."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Přidat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Obchod"
+msgid "Could not connect to device."
+msgstr "Nelze se připojit k zařízení."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Načítání dostupných konfigurací z tiskárny ..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Nemůžete se připojit k Vaší tiskárně Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Konfigurace nejsou k dispozici, protože je tiskárna odpojena."
+msgid "The printer at this address has not responded yet."
+msgstr "Tiskárna na této adrese dosud neodpověděla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Vybrat konfiguraci"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Tuto tiskárnu nelze přidat, protože se jedná o neznámou tiskárnu nebo není hostitelem skupiny."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Zpět"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Připojit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurace"
+msgid "Add a printer"
+msgstr "Přidat tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Vlastní"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Přidat síťovou tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Tiskárna"
+msgid "Add a non-networked printer"
+msgstr "Přidat ne-síťovou tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Povoleno"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiál"
+msgid "Add a Cloud printer"
+msgstr "Přidat Cloudovou tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "S touto kombinací materiálu pro lepší adhezi použijte lepidlo."
+msgid "Waiting for Cloud response"
+msgstr "Čekám na odpověď od Cloudu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Tisknout vybraný model pomocí:"
-msgstr[1] "Tisknout vybrané modely pomocí:"
-msgstr[2] "Tisknout vybrané modely pomocí:"
+msgid "No printers found in your account?"
+msgstr "Žádné tiskárny nenalezeny ve vašem účtě?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Násobit vybraný model"
-msgstr[1] "Násobit vybrané modele"
-msgstr[2] "Násobit vybrané modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Následující tiskárny ve vašem účtě byla přidány do Cury:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Přidat tiskárnu manuálně"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Počet kopií"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Uložit projekt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportovat..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Výběr exportu..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiál"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Oblíbené"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Přeskočit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Obecné"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Uživatelská dohoda"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Tiskárny s povolenou sítí"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Odmítnout a zavřít"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokální tiskárny"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Otevřít &Poslední"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Přes síť nebyla nalezena žádná tiskárna."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Tiskárna"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Obnovit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiál"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Přidat tiskárnu podle IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Nastavit jako aktivní extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Přidat cloudovou tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Povolit extuder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Podpora při problémech"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Zakázat Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Výrobce"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Název tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Poslední aktualizace: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker Account"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Odhlásit se"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Přihlásit se"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Kontroluji..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Účet byl synchronizován"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Nastala chyba..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Nainstalujte čekající aktualizace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Zkontrolovat aktualizace pro účet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Seznam objektů"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Viditelná nastavení"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Zobrazit online průvodce řešením problémů"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Sbalit všechny kategorie"
+msgid "Toggle Full Screen"
+msgstr "Přepnout zobrazení na celou obrazovku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Spravovat nastavení viditelnosti ..."
+msgid "Exit Full Screen"
+msgstr "Ukončit zobrazení na celou obrazovku"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Vrátit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Znovu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Ukončit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Pozice &kamery"
+msgid "3D View"
+msgstr "3D Pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Pohled kamery"
+msgid "Front View"
+msgstr "Přední pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektiva"
+msgid "Top View"
+msgstr "Pohled ze shora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortografický"
+msgid "Left Side View"
+msgstr "Pohled z pravé strany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Pod&ložka"
+msgid "Right Side View"
+msgstr "Pohled z pravé strany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nepřipojen k tiskárně"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Konfigurovat Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Tiskárna nepřijímá příkazy"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "Přidat t&iskárnu..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "V údržbě. Prosím zkontrolujte tiskíárnu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Spravovat &tiskárny..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Ztráta spojení s tiskárnou"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Spravovat materiály..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Tisknu..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Přidat více materiálů z obchodu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Pozastaveno"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Aktualizovat profil s aktuálními nastaveními/přepsáními"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Připravuji..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "Smazat aktuální &změny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Prosím odstraňte výtisk"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Vytvořit profil z aktuálního nastavení/přepsání."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Spravovat profily..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Zobrazit online &dokumentaci"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Nahlásit &chybu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Co je nového"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Více..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Odstranit model"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "&Centerovat model na podložce"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Sesk&upit modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Rozdělit modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Spo&jit modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "Náso&bení modelu..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Vybrat všechny modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Vyčistit podložku"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Znovu načíst všechny modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Uspořádejte všechny modely do všechpodložek"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Uspořádat všechny modely"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Uspořádat selekci"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Resetovat všechny pozice modelů"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Resetovat všechny transformace modelů"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Otevřít soubor(y)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nový projekt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Zobrazit složku s konfigurací"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Konfigurovat viditelnost nastavení..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "Mark&et"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Vypočítáno"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Nastavení"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktuální"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Jednotka"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Potvrdit změnu průměru"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Nový průměr vlákna je nastaven na %1 mm, což není kompatibilní s aktuálním extrudérem. Přejete si pokračovat?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Zrušit tisk"
+msgid "Display Name"
+msgstr "Jméno"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Jste si jist, že chcete zrušit tisknutí?"
+msgid "Material Type"
+msgstr "Typ materiálu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Je tisknuto jako podpora."
+msgid "Color"
+msgstr "Barva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Ostatní modely překrývající se s tímto modelem jsou upraveny."
+msgid "Properties"
+msgstr "Vlastnosti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Výplň překrývající se s tímto modelem byla modifikována."
+msgid "Density"
+msgstr "Husttoa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Přesahy na tomto modelu nejsou podporovány."
+msgid "Diameter"
+msgstr "Průměr"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
-msgstr[2] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Cena filamentu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Seznam objektů"
+msgid "Filament weight"
+msgstr "Váha filamentu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Délka filamentu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Cena za metr"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Tento materiál je propojen s %1 a sdílí některé jeho vlastnosti."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Zrušit propojení s materiálem"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Popis"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informace o adhezi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivovat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Vytvořit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplikovat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Import"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Tiskárna"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Potvrdit odstranění"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Doopravdy chcete odstranit %1? Toto nelze vrátit zpět!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importovat materiál"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nelze importovat materiál <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Úspěšně importován materiál <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exportovat materiál"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Neúspěch při exportu materiálu do <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Úspěšné exportování materiálu do <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Tiskárny"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Přejmenovat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profily"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Vytvořit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplikovat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Vytvořit profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Prosím uveďte jméno pro tento profil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplikovat profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Přejmenovat profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importovat profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportovat profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Tiskárna: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Aktualizovat profil s aktuálním nastavení/přepsánímy"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Tento profil používá výchozí nastavení zadaná tiskárnou, takže nemá žádná nastavení / přepíše v níže uvedeném seznamu."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Vaše aktuální nastavení odpovídá vybranému profilu."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Globální nastavení"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Nastavení zobrazení"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Zkontrolovat vše"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Obecné"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Rozhranní"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Měna:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Styl:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Aby se tyto změny projevily, budete muset aplikaci restartovat."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Slicovat automaticky při změně nastavení."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Slicovat automaticky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Chování výřezu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Zvýraznit červeně místa modelu bez podpor. Bez podpor tyto místa nebudou správně vytisknuta."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Zobrazit převis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Zvýraznit chybějící nebo vedlejší povrchy modelu pomocí varovných značek. Dráhám nástrojů budou často chybět části zamýšlené geometrie."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Zobrazovat chyby modelu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Při výběru modelu pohybuje kamerou tak, aby byl model ve středu pohledu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Vycentrovat kameru pokud je vybrána položka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Mělo by být výchozí chování přiblížení u cury invertováno?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Obrátit směr přibližování kamery."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Mělo by se přibližování pohybovat ve směru myši?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "V pravoúhlé perspektivě není podporováno přiblížení směrem k myši."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Přiblížit směrem k směru myši"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Měly by se modely na platformě pohybovat tak, aby se již neprotínaly?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Zajistěte, aby modely byly odděleny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Měly by být modely na platformě posunuty dolů tak, aby se dotýkaly podložky?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automaticky přetáhnout modely na podložku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Zobrazte v čtečce g-kódu varovnou zprávu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Upozornění ve čtečce G-kódu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Měla by být vrstva vynucena do režimu kompatibility?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Vynutit režim kompatibility zobrazení vrstev (vyžaduje restart)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Měla by se Cura otevřít v místě, kde byla uzavřena?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Při zapnutí obnovit pozici okna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Jaký typ kamery by se měl použít?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Vykreslování kamery:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspektiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortografický"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Otevírám a ukládám soubory"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Měli by se soubory z plochy, nebo externích aplikací otevírat ve stejné instanci Cury?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Používat pouze jednu instanci programu Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Měly by být modely upraveny na velikost podložky, pokud jsou příliš velké?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Škálovat velké modely"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Model se může jevit velmi malý, pokud je jeho jednotka například v metrech, nikoli v milimetrech. Měly by být tyto modely škálovány?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Škálovat extrémně malé modely"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Měly by být modely vybrány po načtení?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Vybrat modely po načtení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Je třeba k názvu tiskové úlohy přidat předponu založenou na názvu tiskárny automaticky?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Přidat předponu zařízení před název úlohy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Mělo by se při ukládání souboru projektu zobrazit souhrn?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Zobrazit souhrnný dialog při ukládání projektu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Výchozí chování při otevírání souboru"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Výchozí chování při otevření souboru s projektem: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Vždy se zeptat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Vždy otevírat jako projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Vždy importovat modely"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Pokud jste provedli změny v profilu a přepnuli na jiný, zobrazí se dialogové okno s dotazem, zda si přejete zachovat své modifikace nebo ne, nebo si můžete zvolit výchozí chování a už nikdy toto dialogové okno nezobrazovat."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profily"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Výchozí chování pro změněné hodnoty nastavení při přepnutí na jiný profil: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Vždy smazat změněné nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Vždy přesunout nastavení do nového profilu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Soukromí"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Měla by Cura zkontrolovat aktualizace při spuštění programu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Zkontrolovat aktualizace při zapnutí"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Měla by být anonymní data o vašem tisku zaslána společnosti Ultimaker? Upozorňujeme, že nejsou odesílány ani ukládány žádné modely, adresy IP ani jiné osobní údaje."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Posílat (anonymní) informace o tisku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Více informací"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Přejmenovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Vytvořit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplikovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Import"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Tiskárna"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Potvrdit odstranění"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Doopravdy chcete odstranit %1? Toto nelze vrátit zpět!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importovat materiál"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nelze importovat materiál <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ pohledu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Úspěšně importován materiál <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nepřipojen k tiskárně"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportovat materiál"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Tiskárna nepřijímá příkazy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Neúspěch při exportu materiálu do <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "V údržbě. Prosím zkontrolujte tiskíárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Úspěšné exportování materiálu do <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Ztráta spojení s tiskárnou"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Tisknu..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Potvrdit změnu průměru"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Pozastaveno"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Nový průměr vlákna je nastaven na %1 mm, což není kompatibilní s aktuálním extrudérem. Přejete si pokračovat?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Připravuji..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Jméno"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Prosím odstraňte výtisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Typ materiálu"
+msgid "Abort Print"
+msgstr "Zrušit tisk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Barva"
+msgid "Are you sure you want to abort the print?"
+msgstr "Jste si jist, že chcete zrušit tisknutí?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Vlastnosti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Prohledat nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Husttoa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Kopírovat hodnotu na všechny extrudery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Průměr"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Kopírovat všechny změněné hodnoty na všechny extrudery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Cena filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Schovat toto nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Váha filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Neukazovat toto nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Délka filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Nechat toto nastavení viditelné"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Cena za metr"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Některá skrytá nastavení používají hodnoty odlišné od jejich normální vypočtené hodnoty.\n"
+"\n"
+"Klepnutím toto nastavení zviditelníte."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Tento materiál je propojen s %1 a sdílí některé jeho vlastnosti."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Toto nastavení se nepoužívá, protože všechna nastavení, která ovlivňuje, jsou přepsána."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Zrušit propojení s materiálem"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Ovlivňuje"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Popis"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Ovlivněno"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informace o adhezi"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Toto nastavení je vždy sdíleno všemi extrudéry. Jeho změnou se změní hodnota všech extruderů."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Nastavení tisku"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Toto nastavení je vyřešeno z konfliktních hodnot specifického extruder:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Vytvořit"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Toto nastavení má jinou hodnotu než profil.\n"
+"\n"
+"Klepnutím obnovíte hodnotu profilu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplikovat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Vytvořit profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Prosím uveďte jméno pro tento profil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplikovat profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Přejmenovat profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importovat profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportovat profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Tiskárna: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Aktualizovat profil s aktuálním nastavení/přepsánímy"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Zrušit aktuální změny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Tento profil používá výchozí nastavení zadaná tiskárnou, takže nemá žádná nastavení / přepíše v níže uvedeném seznamu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Vaše aktuální nastavení odpovídá vybranému profilu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Globální nastavení"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Vypočítáno"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Nastavení"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Toto nastavení se obvykle počítá, ale v současné době je nastavena absolutní hodnota.\n"
+"\n"
+"Klepnutím obnovíte vypočítanou hodnotu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D Pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktuální"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Přední pohled"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Jednotka"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Pohled ze shora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Nastavení zobrazení"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Pohled zleva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Zkontrolovat vše"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Pohled zprava"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extuder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Cílová teplota hotendu. Hotend se ohřeje nebo ochladí na tuto teplotu. Pokud je 0, ohřev teplé vody je vypnutý."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Aktuální teplota tohoto hotendu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Teplota pro předehřátí hotendu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Zrušit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Předehřání"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Před tiskem zahřejte hotend předem. Můžete pokračovat v úpravách tisku, zatímco se zahřívá, a nemusíte čekat na zahřátí hotendu, až budete připraveni k tisku."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Barva materiálu v tomto extruderu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Materiál v tomto extruderu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Vložená trysky v tomto extruderu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Podložka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Cílová teplota vyhřívací podložky. Podložka se zahřeje, nebo schladí směrem k této teplotě. Pokud je 0, tak je vyhřívání podložky vypnuto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Aktuální teplota vyhřívané podložky."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Teplota pro předehřátí podložky."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Před tiskem zahřejte postel předem. Můžete pokračovat v úpravě tisku, zatímco se zahřívá, a nemusíte čekat, až se postel zahřeje, až budete připraveni k tisku."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Ovládání tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Pozice hlavy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Vzdálenost hlavy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Poslat G kód"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Na připojenou tiskárnu odešlete vlastní příkaz G-kódu. Stisknutím klávesy „Enter“ odešlete příkaz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Tiskárna není připojena."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Cloudová tiskárna je offline. Prosím zkontrolujte, zda je tiskárna zapnutá a připojená k internetu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Tiskárna není připojena k vašemu účtu. Prosím navštivte Ultimaker Digital Factory pro navázání spojení."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Připojení ke cloudu není nyní dostupné. Prosím přihlašte se k připojení ke cloudové tiskárně."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Připojení ke cloudu není nyní dostupné. Prosím zkontrolujte si vaše internetové připojení."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Přidat tiskárnu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Spravovat tiskárny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Připojené tiskárny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Přednastavené tiskárny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktivní tisk"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Název úlohy"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Čas tisku"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Předpokládaný zbývající čas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Některé hodnoty nastavení / přepsání se liší od hodnot uložených v profilu.\n"
-"\n"
-"Klepnutím otevřete správce profilů."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Vlastní profily"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Neexistuje žádný profil %1 pro konfiguraci v extruderu %2. Místo toho bude použit výchozí záměr"
-msgstr[1] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
-msgstr[2] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Nastavení tisku zakázáno. Soubor G-kódu nelze změnit."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Doporučeno"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Vlastní"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Zap"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Vyp"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimentální"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Adheze"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Umožňuje tisk okraje nebo voru. Tímto způsobem se kolem nebo pod objekt přidá plochá oblast, kterou lze snadno odříznout."
+msgid "Is printed as support."
+msgstr "Je tisknuto jako podpora."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Postupná výplň"
+msgid "Other models overlapping with this model are modified."
+msgstr "Ostatní modely překrývající se s tímto modelem jsou upraveny."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Postupná výplň postupně zvyšuje množství výplně směrem nahoru."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Upravili jste některá nastavení profilu. Pokud je chcete změnit, přejděte do uživatelského režimu."
+msgid "Infill overlapping with this model is modified."
+msgstr "Výplň překrývající se s tímto modelem byla modifikována."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Podpora"
+msgid "Overlaps with this model are not supported."
+msgstr "Přesahy na tomto modelu nejsou podporovány."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Vytvořte struktury pro podporu částí modelu, které mají přesahy. Bez těchto struktur by se takové části během tisku zhroutily."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
+msgstr[2] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Některá skrytá nastavení používají hodnoty odlišné od jejich normální vypočtené hodnoty.\n"
-"\n"
-"Klepnutím toto nastavení zviditelníte."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Obchod"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Toto nastavení se nepoužívá, protože všechna nastavení, která ovlivňuje, jsou přepsána."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Upr&avit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Ovlivňuje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "D&oplňky"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Ovlivněno"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&reference"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Toto nastavení je vždy sdíleno všemi extrudéry. Jeho změnou se změní hodnota všech extruderů."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Po&moc"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Toto nastavení je vyřešeno z konfliktních hodnot specifického extruder:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nový projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Toto nastavení má jinou hodnotu než profil.\n"
-"\n"
-"Klepnutím obnovíte hodnotu profilu."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Toto nastavení se obvykle počítá, ale v současné době je nastavena absolutní hodnota.\n"
-"\n"
-"Klepnutím obnovíte vypočítanou hodnotu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Prohledat nastavení"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Kopírovat hodnotu na všechny extrudery"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Kopírovat všechny změněné hodnoty na všechny extrudery"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Schovat toto nastavení"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Neukazovat toto nastavení"
+msgid "This package will be installed after restarting."
+msgstr "Tento balíček bude nainstalován po restartování."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Nechat toto nastavení viditelné"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Nastavení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D Pohled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Zavírám %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Přední pohled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Doopravdy chcete zavřít %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Pohled ze shora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Nainstalovat balíček"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Pohled zleva"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Otevřít Soubor(y)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Pohled zprava"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Ve vybraných souborech jsme našli jeden nebo více souborů G-kódu. Naraz můžete otevřít pouze jeden soubor G-kódu. Pokud chcete otevřít soubor G-Code, vyberte pouze jeden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ pohledu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Přidat tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Přidat Cloudovou tiskárnu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Co je nového"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Čekám na odpověď od Cloudu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Cloudová tiskárna je offline. Prosím zkontrolujte, zda je tiskárna zapnutá a připojená k internetu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Žádné tiskárny nenalezeny ve vašem účtě?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Tiskárna není připojena k vašemu účtu. Prosím navštivte Ultimaker Digital Factory pro navázání spojení."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Následující tiskárny ve vašem účtě byla přidány do Cury:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Připojení ke cloudu není nyní dostupné. Prosím přihlašte se k připojení ke cloudové tiskárně."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Přidat tiskárnu manuálně"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Připojení ke cloudu není nyní dostupné. Prosím zkontrolujte si vaše internetové připojení."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "Dokončit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Výrobce"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor profilu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Název tiskárny"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "Přidat tiskárnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Přidat síťovou tiskárnu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Přidat ne-síťovou tiskárnu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Přes síť nebyla nalezena žádná tiskárna."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Spravovat tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Obnovit"
+msgid "Connected printers"
+msgstr "Připojené tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Přidat tiskárnu podle IP"
+msgid "Preset printers"
+msgstr "Přednastavené tiskárny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Přidat cloudovou tiskárnu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Tisknout vybraný model pomocí %1"
+msgstr[1] "Tisknout vybraný model pomocí %1"
+msgstr[2] "Tisknout vybraný model pomocí %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Podpora při problémech"
+msgid "Time estimation"
+msgstr "Odhad času"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Přidat tiskárnu podle IP adresy"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Zadejte IP adresu vaší tiskárny."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Přidat"
+msgid "Material estimation"
+msgstr "Odhad materiálu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nelze se připojit k zařízení."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Nemůžete se připojit k Vaší tiskárně Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Tiskárna na této adrese dosud neodpověděla."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Slicuji..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Tuto tiskárnu nelze přidat, protože se jedná o neznámou tiskárnu nebo není hostitelem skupiny."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nelze slicovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Zpět"
+msgid "Processing"
+msgstr "Zpracovává se"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Připojit"
+msgid "Slice"
+msgstr "Slicovat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Účet Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Váš klíč k propojenému 3D tisku"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker"
+msgid "Start the slicing process"
+msgstr "Začít proces slicování"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Přeskočit"
+msgid "Cancel"
+msgstr "Zrušit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Pomožte nám zlepšovat Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Žádný odhad času není dostupný"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu, včetně:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Žádná cena není dostupná"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Typy zařízení"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Náhled"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Použití materiálu"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Poskytuje vyměnitelnou jednotku za plného zapojení a podporu zápisu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Počet sliců"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Vyměnitelný zásuvný modul pro výstupní zařízení"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Nastavení tisku"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aktualizuje konfigurace z Cura 3.5 na Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Data shromážděná společností Ultimaker Cura nebudou obsahovat žádné osobní údaje."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Aktualizace verze 3.5 na 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Více informací"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aktualizuje konfigurace z Cura 4.6.2 na Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Prázdné"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Aktualizace verze 4.6.2 na 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Uživatelská dohoda"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aktualizuje konfigurace z Cura 2.2 na Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Odmítnout a zavřít"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Aktualizace verze 2.2 na 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Vítejte v Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aktualizuje konfigurace z Cura 4.2 na Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Při nastavování postupujte podle těchto pokynů\n"
-"Ultimaker Cura. Bude to trvat jen několik okamžiků."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Aktualizace verze 4.2 na 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Začínáme"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Aktualizuje konfigurace z Cura 4.6.0 na Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Co je nového v Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Aktualizace verze 4.6.0 na 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Zkontroluje možné tiskové modely a konfiguraci tisku a poskytne návrhy."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aktualizuje konfigurace z Cura 3.0 na Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Kontroler modelu"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Aktualizace verze 3.0 na 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Poskytuje podporu pro čtení souborů 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aktualizuje konfigurace z Cura 4.0 na Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Čtečka 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Aktualizace verze 4.0 na 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Poskytuje podporu pro psaní souborů 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aktualizuje konfigurace z Cura 2.6 na Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Zapisovač 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Aktualizace verze 2.6 na 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Poskytuje podporu pro čtení souborů AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aktualizuje konfigurace z Cura 2.5 na Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Čtečka AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Aktualizace verze 2.5 na 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Zálohujte a obnovte konfiguraci."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aktualizuje konfigurace z Cura 4.1 na Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura zálohy"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Aktualizace verze 4.1 na 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Poskytuje odkaz na backend krájení CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aktualizuje konfigurace z Cura 2.1 na Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Aktualizace verze 2.1 na 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Poskytuje podporu pro import profilů Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aktualizuje konfigurace z Cura 3.2 na Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Čtečka Cura profilu"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Aktualizace verze 3.2 na 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Poskytuje podporu pro export profilů Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Aktualizuje konfigurace z Cura 4.5 na Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Zapisovač Cura profilu"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Aktualizace verze 4.5 na 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Zkontroluje dostupné aktualizace firmwaru."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Aktualizuje konfigurace z Cura 4.4 na Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Kontroler aktualizace firmwaru"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Aktualizace verze 4.4 na 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Poskytuje akce počítače pro aktualizaci firmwaru."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware Updater"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Čte g-kód z komprimovaného archivu."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aktualizuje konfigurace z Cura 3.3 na Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Čtečka kompresovaného G kódu"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Aktualizace verze 3.3 na 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Zapíše g-kód do komprimovaného archivu."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aktualizuje konfigurace z Cura 4.3 na Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Zapisova kompresovaného G kódu"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Aktualizace verze 4.3 na 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Poskytuje podporu pro import profilů ze souborů g-kódu."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aktualizuje konfigurace z Cura 3.4 na Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Čtečka profilu G kódu"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Aktualizace verze 3.4 na 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Povoluje načítání a zobrazení souborů G kódu."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aktualizuje konfigurace z Cura 2.7 na Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Čtečka G kódu"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Aktualizace verze 2.7 na 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Zapisuje G kód o souboru."
+msgid "Provides support for reading AMF files."
+msgstr "Poskytuje podporu pro čtení souborů AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Zapisovač G kódu"
+msgid "AMF Reader"
+msgstr "Čtečka AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Umožňuje generovat tiskovou geometrii ze 2D obrazových souborů."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Poskytuje podporu pro import profilů ze souborů g-kódu."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Čtečka obrázků"
+msgid "G-code Profile Reader"
+msgstr "Čtečka profilu G kódu"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Poskytuje podporu pro import profilů ze starších verzí Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Poskytuje akce počítače pro aktualizaci firmwaru."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Čtečka legacy Cura profilu"
+msgid "Firmware Updater"
+msgstr "Firmware Updater"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Poskytuje způsob, jak změnit nastavení zařízení (například objem sestavení, velikost trysek atd.)."
+msgid "Provides support for reading X3D files."
+msgstr "Poskytuje podporu pro čtení souborů X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Akce nastavení zařízení"
+msgid "X3D Reader"
+msgstr "Čtečka X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Poskytuje monitorovací scénu v Cuře."
+msgid "Find, manage and install new Cura packages."
+msgstr "Najděte, spravujte a nainstalujte nové balíčky Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fáze monitoringu"
+msgid "Toolbox"
+msgstr "Nástroje"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5632,75 +5732,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Post Processing"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Poskytuje přípravnou fázi v Cuře."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Poskytuje odkaz na backend krájení CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fáze přípravy"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Poskytuje fázi náhledu v Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Přijme G-kód a odešle je do tiskárny. Plugin může také aktualizovat firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fáze náhledu"
+msgid "USB printing"
+msgstr "USB tisk"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Poskytuje vyměnitelnou jednotku za plného zapojení a podporu zápisu."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Poskytuje podporu pro export profilů Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Vyměnitelný zásuvný modul pro výstupní zařízení"
+msgid "Cura Profile Writer"
+msgstr "Zapisovač Cura profilu"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Protokolová určité události, aby je mohl použít reportér havárií"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Spravuje síťová připojení k síťovým tiskárnám Ultimaker."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Záznamník hlavy"
+msgid "Ultimaker Network Connection"
+msgstr "Síťové připojení Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Poskytuje zobrazení simulace."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Poskytuje akce strojů pro stroje Ultimaker (jako je průvodce vyrovnáváním postele, výběr upgradů atd.)."
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Pohled simulace"
+msgid "Ultimaker machine actions"
+msgstr "Akce zařízení Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Odešle anonymní informace o slicování. Lze deaktivovat pomocí preferencí."
+msgid "Provides support for reading 3MF files."
+msgstr "Poskytuje podporu pro čtení souborů 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informace o slicování"
+msgid "3MF Reader"
+msgstr "Čtečka 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Poskytuje normální zobrazení pevné sítě."
+msgid "Writes g-code to a compressed archive."
+msgstr "Zapíše g-kód do komprimovaného archivu."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Solid View"
+msgid "Compressed G-code Writer"
+msgstr "Zapisova kompresovaného G kódu"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Čte g-kód z komprimovaného archivu."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Čtečka kompresovaného G kódu"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Zkontroluje možné tiskové modely a konfiguraci tisku a poskytne návrhy."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Kontroler modelu"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Zkontroluje dostupné aktualizace firmwaru."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Kontroler aktualizace firmwaru"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Povoluje načítání a zobrazení souborů G kódu."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Čtečka G kódu"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5712,16 +5852,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Mazač podpor"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Najděte, spravujte a nainstalujte nové balíčky Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Nástroje"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5732,6 +5862,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Čtečka trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Protokolová určité události, aby je mohl použít reportér havárií"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Záznamník hlavy"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5742,265 +5882,252 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Čtečka UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Poskytuje podporu pro psaní balíčků formátu Ultimaker."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Zapisovač UFP"
-
-#: UltimakerMachineActions/plugin.json
-msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Poskytuje akce strojů pro stroje Ultimaker (jako je průvodce vyrovnáváním postele, výběr upgradů atd.)."
-
-#: UltimakerMachineActions/plugin.json
-msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Akce zařízení Ultimaker"
-
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Spravuje síťová připojení k síťovým tiskárnám Ultimaker."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Poskytuje podporu pro import profilů ze starších verzí Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Síťové připojení Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Čtečka legacy Cura profilu"
 
-#: USBPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Přijme G-kód a odešle je do tiskárny. Plugin může také aktualizovat firmware."
+msgid "Provides a prepare stage in Cura."
+msgstr "Poskytuje přípravnou fázi v Cuře."
 
-#: USBPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB tisk"
+msgid "Prepare Stage"
+msgstr "Fáze přípravy"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aktualizuje konfigurace z Cura 2.1 na Cura 2.2."
+msgid "Provides a monitor stage in Cura."
+msgstr "Poskytuje monitorovací scénu v Cuře."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Aktualizace verze 2.1 na 2.2"
+msgid "Monitor Stage"
+msgstr "Fáze monitoringu"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aktualizuje konfigurace z Cura 2.2 na Cura 2.4."
+msgid "Provides the X-Ray view."
+msgstr "Poskytuje rentgenové zobrazení."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Aktualizace verze 2.2 na 2.4"
+msgid "X-Ray View"
+msgstr "Rentgenový pohled"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aktualizuje konfigurace z Cura 2.5 na Cura 2.6."
+msgid "Provides support for writing 3MF files."
+msgstr "Poskytuje podporu pro psaní souborů 3MF."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Aktualizace verze 2.5 na 2.6"
+msgid "3MF Writer"
+msgstr "Zapisovač 3MF"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aktualizuje konfigurace z Cura 2.6 na Cura 2.7."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Odešle anonymní informace o slicování. Lze deaktivovat pomocí preferencí."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Aktualizace verze 2.6 na 2.7"
+msgid "Slice info"
+msgstr "Informace o slicování"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aktualizuje konfigurace z Cura 2.7 na Cura 3.0."
+msgid "Provides a preview stage in Cura."
+msgstr "Poskytuje fázi náhledu v Cura."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Aktualizace verze 2.7 na 3.0"
+msgid "Preview Stage"
+msgstr "Fáze náhledu"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aktualizuje konfigurace z Cura 3.0 na Cura 3.1."
+msgid "Provides the Simulation view."
+msgstr "Poskytuje zobrazení simulace."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Aktualizace verze 3.0 na 3.1"
+msgid "Simulation View"
+msgstr "Pohled simulace"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aktualizuje konfigurace z Cura 3.2 na Cura 3.3."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Poskytuje způsob, jak změnit nastavení zařízení (například objem sestavení, velikost trysek atd.)."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Aktualizace verze 3.2 na 3.3"
+msgid "Machine Settings Action"
+msgstr "Akce nastavení zařízení"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aktualizuje konfigurace z Cura 3.3 na Cura 3.4."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Poskytuje funkce pro čtení a zápis materiálových profilů založených na XML."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Aktualizace verze 3.3 na 3.4"
+msgid "Material Profiles"
+msgstr "Materiálové profily"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aktualizuje konfigurace z Cura 3.4 na Cura 3.5."
+msgid "Provides a normal solid mesh view."
+msgstr "Poskytuje normální zobrazení pevné sítě."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Aktualizace verze 3.4 na 3.5"
+msgid "Solid View"
+msgstr "Solid View"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aktualizuje konfigurace z Cura 3.5 na Cura 4.0."
+msgid "Provides support for importing Cura profiles."
+msgstr "Poskytuje podporu pro import profilů Cura."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Aktualizace verze 3.5 na 4.0"
+msgid "Cura Profile Reader"
+msgstr "Čtečka Cura profilu"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aktualizuje konfigurace z Cura 4.0 na Cura 4.1."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Poskytuje podporu pro psaní balíčků formátu Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Aktualizace verze 4.0 na 4.1"
+msgid "UFP Writer"
+msgstr "Zapisovač UFP"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aktualizuje konfigurace z Cura 4.1 na Cura 4.2."
+msgid "Writes g-code to a file."
+msgstr "Zapisuje G kód o souboru."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Aktualizace verze 4.1 na 4.2"
+msgid "G-code Writer"
+msgstr "Zapisovač G kódu"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aktualizuje konfigurace z Cura 4.2 na Cura 4.3."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Umožňuje generovat tiskovou geometrii ze 2D obrazových souborů."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Aktualizace verze 4.2 na 4.3"
+msgid "Image Reader"
+msgstr "Čtečka obrázků"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aktualizuje konfigurace z Cura 4.3 na Cura 4.4."
+msgid "Backup and restore your configuration."
+msgstr "Zálohujte a obnovte konfiguraci."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Aktualizace verze 4.3 na 4.4"
-
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Aktualizuje konfigurace z Cura 4.4 na Cura 4.5."
+msgid "Cura Backups"
+msgstr "Cura zálohy"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Aktualizace verze 4.4 na 4.5"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Váš model není rozmanitý. Zvýrazněné oblasti indikují buď chybějící, či vedlejší povrch."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Aktualizuje konfigurace z Cura 4.5 na Cura 4.6."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Chyby modelu"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Aktualizace verze 4.5 na 4.6"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Tloušťka vrstvy"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Aktualizuje konfigurace z Cura 4.6.0 na Cura 4.6.2."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Váš klíč k propojenému 3D tisku"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Aktualizace verze 4.6.0 na 4.6.2"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů\n"
+#~ "- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli\n"
+#~ "- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aktualizuje konfigurace z Cura 4.6.2 na Cura 4.7."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Vytvořit účet"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Aktualizace verze 4.6.2 na 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Smazat vybraný model"
+#~ msgstr[1] "Smazat vybrané modely"
+#~ msgstr[2] "Smazat vybrané modely"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centrovat vybraný model"
+#~ msgstr[1] "Centrovat vybrané modely"
+#~ msgstr[2] "Centrovat vybrané modely"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Násobit vybraný model"
+#~ msgstr[1] "Násobit vybrané modely"
+#~ msgstr[2] "Násobit vybrané modely"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Dokončit"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Účet Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Poskytuje podporu pro čtení souborů X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Váš klíč k propojenému 3D tisku"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Čtečka X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Poskytuje funkce pro čtení a zápis materiálových profilů založených na XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiálové profily"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Poskytuje rentgenové zobrazení."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Při nastavování postupujte podle těchto pokynů\n"
+#~ "Ultimaker Cura. Bude to trvat jen několik okamžiků."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Rentgenový pohled"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Co je nového v Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/cs_CZ/fdmextruder.def.json.po b/resources/i18n/cs_CZ/fdmextruder.def.json.po
index 03847d2514..07831057f6 100644
--- a/resources/i18n/cs_CZ/fdmextruder.def.json.po
+++ b/resources/i18n/cs_CZ/fdmextruder.def.json.po
@@ -1,13 +1,13 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 # Ruben Dulek <r.dulek@ultimaker.com>, 2020.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-02-20 17:30+0100\n"
 "Last-Translator: DenyCZ <www.github.com/DenyCZ>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
diff --git a/resources/i18n/cs_CZ/fdmprinter.def.json.po b/resources/i18n/cs_CZ/fdmprinter.def.json.po
index 7dd0b5d797..9bde00ab48 100644
--- a/resources/i18n/cs_CZ/fdmprinter.def.json.po
+++ b/resources/i18n/cs_CZ/fdmprinter.def.json.po
@@ -1,13 +1,13 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 # Ruben Dulek <r.dulek@ultimaker.com>, 2020.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-04 12:40+0200\n"
 "Last-Translator: DenyCZ <www.github.com/DenyCZ>\n"
 "Language-Team: DenyCZ <www.github.com/DenyCZ>\n"
@@ -419,6 +419,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Zda extrudéry sdílejí jeden ohřívač spíše než každý extrudér mající svůj vlastní ohřívač."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Zakázané zóny"
@@ -485,8 +505,8 @@ msgstr "Offset s extrudérem"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Naneste odsazení extrudéru na souřadnicový systém."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -880,8 +900,8 @@ msgstr "Násobitel šířky čáry v první vrstvě. Jejich zvýšení by mohlo
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Shell"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -949,166 +969,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Vzdálenost pohybového posunu vloženého za vnější stěnu, aby se skryla Z šev lépe."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Nejvyšší povrchový extrudér"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Vytlačovací stroj používaný pro tisk nejvyššího povrchu. To se používá při vícenásobném vytlačování."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Nejvyšší povrchová vrstva"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Počet nejpřednějších vrstev pokožky. Obvykle stačí jedna horní vrstva nejvíce k vytvoření horních povrchů vyšší kvality."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Vrchní/spodní extruder"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Vytlačovací souprava použitá pro tisk horní a spodní pokožky. To se používá při vícenásobném vytlačování."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Vrchní/spodní tloušťka"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Tloušťka horní / dolní vrstvy v tisku. Tato hodnota dělená výškou vrstvy definuje počet vrstev horní / dolní."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Vrchní tloušťka"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Tloušťka horních vrstev v tisku. Tato hodnota dělená výškou vrstvy definuje počet vrchních vrstev."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Vrchní vrstvy"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Počet vrchních vrstev. Při výpočtu podle nejvyšší tloušťky se tato hodnota zaokrouhlí na celé číslo."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Spodní tloušťka"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Tloušťka spodních vrstev v tisku. Tato hodnota dělená výškou vrstvy definuje počet spodních vrstev."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Spodní vrstvy"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Počet spodních vrstev. Při výpočtu podle tloušťky dna je tato hodnota zaokrouhlena na celé číslo."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Počáteční spodní vrstvy"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Počet počátečních spodních vrstev od montážní desky směrem nahoru. Při výpočtu podle tloušťky dna je tato hodnota zaokrouhlena na celé číslo."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Vrchní/spodní vzor"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Vzor horní / dolní vrstvy."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Čáry"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Soustředný"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Vzor spodní počáteční vrstvy"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Vzor ve spodní části tisku na první vrstvě."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Čáry"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Soustředný"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Připojte horní / dolní polygony"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Propojte horní / dolní povrchové cesty tam, kde běží vedle sebe. Pro soustředné uspořádání umožňující toto nastavení výrazně zkracuje dobu cestování, ale protože se spojení může uskutečnit uprostřed výplně, může tato funkce snížit kvalitu povrchu."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Pokyny pro horní a dolní řádek"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Seznam směrů celočíselných čar, které se použijí, když horní / dolní vrstvy používají čáry nebo vzor zig zag. Prvky ze seznamu se používají postupně jako vrstvy a jakmile je dosaženo konce seznamu, začíná znovu na začátku. Položky seznamu jsou odděleny čárkami a celý seznam je obsažen v hranatých závorkách. Výchozí je prázdný seznam, což znamená použití tradičních výchozích úhlů (45 a 135 stupňů)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Vnější stěna"
@@ -1414,6 +1274,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Pokud je tato možnost povolena, jsou souřadnice z švu vztaženy ke středu každé součásti. Pokud je zakázána, souřadnice definují absolutní polohu na sestavovací desce."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Nejvyšší povrchový extrudér"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Vytlačovací stroj používaný pro tisk nejvyššího povrchu. To se používá při vícenásobném vytlačování."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Nejvyšší povrchová vrstva"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Počet nejpřednějších vrstev pokožky. Obvykle stačí jedna horní vrstva nejvíce k vytvoření horních povrchů vyšší kvality."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Vrchní/spodní extruder"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Vytlačovací souprava použitá pro tisk horní a spodní pokožky. To se používá při vícenásobném vytlačování."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Vrchní/spodní tloušťka"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Tloušťka horní / dolní vrstvy v tisku. Tato hodnota dělená výškou vrstvy definuje počet vrstev horní / dolní."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Vrchní tloušťka"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Tloušťka horních vrstev v tisku. Tato hodnota dělená výškou vrstvy definuje počet vrchních vrstev."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Vrchní vrstvy"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Počet vrchních vrstev. Při výpočtu podle nejvyšší tloušťky se tato hodnota zaokrouhlí na celé číslo."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Spodní tloušťka"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Tloušťka spodních vrstev v tisku. Tato hodnota dělená výškou vrstvy definuje počet spodních vrstev."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Spodní vrstvy"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Počet spodních vrstev. Při výpočtu podle tloušťky dna je tato hodnota zaokrouhlena na celé číslo."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Počáteční spodní vrstvy"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Počet počátečních spodních vrstev od montážní desky směrem nahoru. Při výpočtu podle tloušťky dna je tato hodnota zaokrouhlena na celé číslo."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Vrchní/spodní vzor"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Vzor horní / dolní vrstvy."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Čáry"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Soustředný"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Vzor spodní počáteční vrstvy"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Vzor ve spodní části tisku na první vrstvě."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Čáry"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Soustředný"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Připojte horní / dolní polygony"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Propojte horní / dolní povrchové cesty tam, kde běží vedle sebe. Pro soustředné uspořádání umožňující toto nastavení výrazně zkracuje dobu cestování, ale protože se spojení může uskutečnit uprostřed výplně, může tato funkce snížit kvalitu povrchu."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Pokyny pro horní a dolní řádek"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Seznam směrů celočíselných čar, které se použijí, když horní / dolní vrstvy používají čáry nebo vzor zig zag. Prvky ze seznamu se používají postupně jako vrstvy a jakmile je dosaženo konce seznamu, začíná znovu na začátku. Položky seznamu jsou odděleny čárkami a celý seznam je obsažen v hranatých závorkách. Výchozí je prázdný seznam, což znamená použití tradičních výchozích úhlů (45 a 135 stupňů)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Žádný povrch v Z mezerách"
@@ -1554,6 +1584,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Upravte míru překrytí mezi stěnami a (koncovými body) osami porvchu. Mírné překrytí umožňuje, aby se stěny pevně spojily s povrchem. Je třeba si uvědomit, že při stejné šířce linie povrchu a stěny může jakákoli hodnota přesahující polovinu šířky stěny již způsobit, že jakýkoli povrch projde kolem zdi, protože v tomto bodě může pozice trysky extruderu povrchu již dosáhnout. kolem středu zdi."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Šířka odstranění povrchu"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Největší šířka oblastí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem vrchní / spodní kůže na šikmých plochách v modelu."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Horní šířka odstranění povrchu"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Největší šířka horních oblastí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem vrchní kůže na šikmých plochách v modelu."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Dolní šířka odstranění povrchu"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Největší šířka spodních částí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem spodní vrstvy na šikmých plochách v modelu."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Vzdálenost rozšíření povrchu"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Vzdálenost povrchu je rozšířena do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a díky tomu lepí přilnavost stěn na sousedních vrstvách k povrchu. Nižší hodnoty šetří množství použitého materiálu."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Horní vzdálenost rozšíření povrchu"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Vzdálenost, ve které jsou vrchní vrstvy povrchu rozšířeny do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a lepší přilnutí stěn nad vrstvou k povrchu. Nižší hodnoty šetří množství použitého materiálu."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Dolní vzdálenost rozšíření povrchu"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Vzdálenost spodního povrchu, který se rozšiřuje do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a lepší přilnavost povrchu ke stěnám na spodní vrstvě. Nižší hodnoty šetří množství použitého materiálu."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Maximální úhel pro rozšíření povrchu"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Minimální úhel pro rozšíření povrchu"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Oblasti povrchu užší, než je tento, nejsou rozšířeny. Tím se zabrání rozšíření úzkých oblastí vzhledu, které jsou vytvořeny, když má povrch modelu sklon v blízkosti svislé."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Výplň"
@@ -1863,86 +1973,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Minimální úhel vnitřních přesahů, pro které je přidána výplň. Při hodnotě 0 ° jsou objekty zcela vyplněny výplní, 90 ° neposkytuje výplně."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Šířka odstranění povrchu"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Největší šířka oblastí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem vrchní / spodní kůže na šikmých plochách v modelu."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Horní šířka odstranění povrchu"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Největší šířka horních oblastí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem vrchní kůže na šikmých plochách v modelu."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Dolní šířka odstranění povrchu"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Největší šířka spodních částí povrchu, které mají být odstraněny. Každá oblast povrchu menší než tato hodnota zmizí. To může pomoci omezit množství času a materiálu stráveného tiskem spodní vrstvy na šikmých plochách v modelu."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Vzdálenost rozšíření povrchu"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Vzdálenost povrchu je rozšířena do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a díky tomu lepí přilnavost stěn na sousedních vrstvách k povrchu. Nižší hodnoty šetří množství použitého materiálu."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Horní vzdálenost rozšíření povrchu"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Vzdálenost, ve které jsou vrchní vrstvy povrchu rozšířeny do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a lepší přilnutí stěn nad vrstvou k povrchu. Nižší hodnoty šetří množství použitého materiálu."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Dolní vzdálenost rozšíření povrchu"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Vzdálenost spodního povrchu, který se rozšiřuje do výplně. Vyšší hodnoty umožňují lepší přilnavost povrchu k vzoru výplně a lepší přilnavost povrchu ke stěnám na spodní vrstvě. Nižší hodnoty šetří množství použitého materiálu."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Maximální úhel pro rozšíření povrchu"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Horní a/nebo dolní povrch objektu s větším úhlem, než je toto nastavení, nebudou mít rozbalenou horní/dolní plochu. Tím se zabrání rozšíření úzkých oblastí vzhledu, které jsou vytvořeny, když má povrch modelu téměř svislý sklon. Úhel 0° je vodorovný, zatímco úhel 90° je svislý."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Minimální úhel pro rozšíření povrchu"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Oblasti povrchu užší, než je tento, nejsou rozšířeny. Tím se zabrání rozšíření úzkých oblastí vzhledu, které jsou vytvořeny, když má povrch modelu sklon v blízkosti svislé."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Tloušťka podpory hrany povrchu"
@@ -2559,8 +2589,8 @@ msgstr "Rychlost prvotní vrstvy"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Rychlost počáteční vrstvy. Doporučuje se nižší hodnota pro zlepšení přilnavosti k montážní desce."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5073,7 +5103,7 @@ msgstr "Úroveň Zpracování Masky"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5422,6 +5452,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Maximální úhel přesahů po jejich tisku. Při hodnotě 0 ° jsou všechny převisy nahrazeny kusem modelu připojeným k podložce, 90 ° model nijak nijak nezmění."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Povolit Coasting"
@@ -6360,6 +6400,22 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Transformační matice, která se použije na model při načítání ze souboru."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Naneste odsazení extrudéru na souřadnicový systém."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Shell"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Horní a/nebo dolní povrch objektu s větším úhlem, než je toto nastavení, nebudou mít rozbalenou horní/dolní plochu. Tím se zabrání rozšíření úzkých oblastí vzhledu, které jsou vytvořeny, když má povrch modelu téměř svislý sklon. Úhel 0° je vodorovný, zatímco úhel 90° je svislý."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Rychlost počáteční vrstvy. Doporučuje se nižší hodnota pro zlepšení přilnavosti k montážní desce."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Teplota použitá pro vyhřívanou podložku. Pokud je to 0, teplota podložky nebude upravena."
diff --git a/resources/i18n/cura.pot b/resources/i18n/cura.pot
index f2ef969f37..d70842b30f 100644
--- a/resources/i18n/cura.pot
+++ b/resources/i18n/cura.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,184 +18,197 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid ""
-"The printer(s) below cannot be connected because they are part of a group"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid ""
-"The visual profile is designed to print visual prototypes and models with "
-"the intent of high visual and surface quality."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt ""
+"@info 'width', 'depth' and 'height' are variable names that must NOT be "
+"translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid ""
-"The engineering profile is designed to print functional prototypes and end-"
-"use parts with the intent of better accuracy and for closer tolerances."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid ""
-"The draft profile is designed to print initial prototypes and concept "
-"validation with the intent of significant print time reduction."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid ""
+"The visual profile is designed to print visual prototypes and models with "
+"the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid ""
+"The engineering profile is designed to print functional prototypes and end-"
+"use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid ""
+"The draft profile is designed to print initial prototypes and concept "
+"validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid ""
+"The printer(s) below cannot be connected because they are part of a group"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid ""
-"The build volume height has been reduced due to the value of the \"Print "
-"Sequence\" setting to prevent the gantry from colliding with printed models."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
@@ -210,32 +223,32 @@ msgid ""
 "                "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
@@ -245,221 +258,134 @@ msgid ""
 "        "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt ""
-"@info 'width', 'depth' and 'height' are variable names that must NOT be "
-"translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
+msgid "Login failed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
+msgctxt "@message"
+msgid "Could not read response."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid ""
+"Unable to start a new sign in process. Check if another sign in attempt is "
+"still active."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
-msgctxt "@message"
-msgid "Could not read response."
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid ""
-"Unable to start a new sign in process. Check if another sign in attempt is "
-"still active."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid ""
@@ -467,20 +393,42 @@ msgid ""
 "overwrite it?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid ""
+"Settings have been changed to match the current availability of extruders:"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid ""
 "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid ""
@@ -488,44 +436,44 @@ msgid ""
 "failure."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid ""
 "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid ""
@@ -533,51 +481,51 @@ msgid ""
 "import it."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -585,7 +533,7 @@ msgid ""
 "definition '{1}'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -594,815 +542,522 @@ msgid ""
 "combination that can use this quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid ""
-"Settings have been changed to match the current availability of extruders:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
-msgctxt "@info:title"
-msgid "Settings updated"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
+msgid "Can't Find Location"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
+msgid "Skip"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
+msgid "Close"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
+msgid "Next"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
+msgid "Add"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
+msgid "Cancel"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
 msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and "
-"material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</"
-"p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
-"guide</a></p>"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> contains an unknown machine type "
-"<message>{1}</message>. Cannot import the machine. Models will be imported "
-"instead."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
-"</message>."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid ""
-"Project file <filename>{0}</filename> is made using profiles that are "
-"unknown to this version of Ultimaker Cura."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid ""
-"The operating system does not allow saving a project file to this location "
-"or with this file name."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
+"The build volume height has been reduced due to the value of the \"Print "
+"Sequence\" setting to prevent the gantry from colliding with printed models."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
+msgid "Build Volume"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid ""
-"Unable to slice with the current material as it is incompatible with the "
-"selected machine or configuration."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice with the current settings. The following settings have "
-"errors: {0}"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice due to some per-model settings. The following settings have "
-"errors on one or more models: {error_labels}"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because the prime tower or prime position(s) are invalid."
+msgid "Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid ""
-"Unable to slice because there are objects associated with disabled Extruder "
-"%s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
+msgid "Multiplying and placing objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt ""
-"@info Don't translate {machine_name}, since it gets replaced by a printer "
-"name!"
-msgid ""
-"New features or bug-fixes may be available for your {machine_name}! If not "
-"already at the latest version, it is recommended to update the firmware on "
-"your printer to version {latest_version}."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
+msgid "Placing Objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid ""
-"Make sure the g-code is suitable for your printer and printer configuration "
-"before sending the file to it. The g-code representation may not be accurate."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
+msgid "Placing Object"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+msgctxt "@button"
+msgid "Decline"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+msgctxt "@button"
+msgid "Agree"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid ""
-"Your model is not manifold. The highlighted areas indicate either missing or "
-"extraneous surfaces."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+msgctxt "@button"
+msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
+msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
+msgctxt "@info:generic"
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
 msgctxt "@action:button"
 msgid "Sync"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid ""
+"Unable to slice with the current material as it is incompatible with the "
+"selected machine or configuration."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice with the current settings. The following settings have "
+"errors: {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice due to some per-model settings. The following settings have "
+"errors on one or more models: {error_labels}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid ""
+"Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid ""
+"Unable to slice because there are objects associated with disabled Extruder "
+"%s."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid ""
+"A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid ""
+"A print is still in progress. Cura cannot start another print via USB until "
+"the previous print has completed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@info:status"
-msgid "Connected via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1410,71 +1065,71 @@ msgid_plural "... and {0} others"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1488,7 +1143,7 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be "
@@ -1496,47 +1151,48 @@ msgid ""
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid ""
-"You are attempting to connect to a printer that is not running Ultimaker "
-"Connect. Please update the printer to the latest firmware."
+msgid "tomorrow"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid ""
-"Cura has detected material profiles that were not yet installed on the host "
-"printer of group {0}."
+msgid "Sending Print Job"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -1544,401 +1200,514 @@ msgid ""
 "can visit the web page to configure it as a group host."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
+msgid ""
+"Cura has detected material profiles that were not yet installed on the host "
+"printer of group {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid ""
+"You are attempting to connect to a printer that is not running Ultimaker "
+"Connect. Please update the printer to the latest firmware."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
+msgid "Select upgrades"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Project file <filename>{0}</filename> contains an unknown machine type "
+"<message>{1}</message>. Cannot import the machine. Models will be imported "
+"instead."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}"
+"</message>."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid ""
-"A USB print is in progress, closing Cura will stop this print. Are you sure?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
 msgid ""
-"A print is still in progress. Cura cannot start another print via USB until "
-"the previous print has completed."
+"Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid ""
+"Project file <filename>{0}</filename> is made using profiles that are "
+"unknown to this version of Ultimaker Cura."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
+msgid "3MF File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
+msgid "Compressed G-code File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
 msgid ""
-"Some things could be problematic in this print. Click to see tips for "
-"adjustment."
+"<p>One or more 3D models may not print optimally due to the model size and "
+"material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</"
+"p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
+"guide</a></p>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt ""
+"@info Don't translate {machine_name}, since it gets replaced by a printer "
+"name!"
+msgid ""
+"New features or bug-fixes may be available for your {machine_name}! If not "
+"already at the latest version, it is recommended to update the firmware on "
+"your printer to version {latest_version}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid ""
+"Make sure the g-code is suitable for your printer and printer configuration "
+"before sending the file to it. The g-code representation may not be accurate."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
+msgid "Create a volume in which supports are not printed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid ""
+"The operating system does not allow saving a project file to this location "
+"or with this file name."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
 msgid ""
-"You will need to restart Cura before your backup is restored. Do you want to "
-"close Cura now?"
+"The highlighted areas indicate either missing or extraneous surfaces. Fix "
+"your model and open it again into Cura."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid ""
-"You don't have any backups currently. Use the 'Backup Now' button to create "
-"one."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid ""
-"During the preview phase, you'll be limited to 5 visible backups. Remove a "
-"backup to see older ones."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid ""
 "Firmware is the piece of software running directly on your 3D printer. This "
@@ -1946,2627 +1715,3339 @@ msgid ""
 "makes your printer work."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid ""
 "The firmware shipping with new printers works, but new versions tend to have "
 "more features and improvements."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid ""
 "Firmware can not be updated because there is no connection with the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid ""
 "Firmware can not be updated because the connection with the printer does not "
 "support upgrading firmware."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid ""
+"The following packages can not be installed because of an incompatible Cura "
+"version:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid ""
+"You are uninstalling materials and/or profiles that are still in use. "
+"Confirming will reset the following materials/profiles to their defaults."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid ""
-"For lithophanes dark pixels should correspond to thicker locations in order "
-"to block more light coming through. For height maps lighter pixels signify "
-"higher terrain, so lighter pixels should correspond to thicker locations in "
-"the generated 3D model."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
 msgid ""
-"For lithophanes a simple logarithmic model for translucency is available. "
-"For height maps the pixel values correspond to heights linearly."
+"Could not connect to the Cura Package database. Please check your connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid ""
-"The percentage of light penetrating a print with a thickness of 1 "
-"millimeter. Lowering this value increases the contrast in dark regions and "
-"decreases the contrast in light regions of the image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
+msgid "Installed plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
+msgid "Website"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
+msgid "Email"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid ""
+"Please sign in to get verified plugins and materials for Ultimaker Cura "
+"Enterprise"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
+msgid "Compatibility"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
+msgid "Will install upon restarting"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
+msgid "You will need to restart Cura before changes in packages have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
+msgid "Queued"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+msgctxt "@label"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+msgctxt "@label"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "Compatibility Mode"
+msgid "Waiting for"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "Travels"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural ""
+"The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid ""
+"The printer %1 is assigned, but the job contains an unknown material "
+"configuration."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Helpers"
+msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Shell"
+msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Infill"
+msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Only Show Top Layers"
+msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
+msgid ""
+"Override will use the specified settings with the existing printer "
+"configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Top / Bottom"
+msgid "Glass"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Inner Wall"
+msgid "Aluminum"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "min"
+msgid "Unavailable printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "max"
+msgid "First available"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
+msgid "Connect to Networked Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
 msgid ""
-"Ultimaker Cura collects anonymous data in order to improve the print quality "
-"and user experience. Below is an example of all the data that is shared:"
+"To print directly to your printer over the network, please make sure your "
+"printer is connected to the network using a network cable or by connecting "
+"your printer to your WIFI network. If you don't connect Cura with your "
+"printer, you can still use a USB drive to transfer g-code files to your "
+"printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "Select your printer from the list below:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+msgctxt "@action:button"
+msgid "Edit"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
-msgid "Back"
+msgid "Remove"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
-msgid "Compatibility"
+msgid ""
+"If your printer is not listed, read the <a href='%1'>network printing "
+"troubleshooting guide</a>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+msgctxt "@label"
+msgid "Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+msgctxt "@label"
+msgid "Firmware version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+msgctxt "@label"
+msgid "This printer is not set up to host a group of printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+msgctxt "@action:button"
+msgid "Connect"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+msgctxt "@title:window"
+msgid "Invalid IP address"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+msgctxt "@title:window"
+msgid "Printer Address"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Update"
+msgid "OK"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
 msgctxt "@action:button"
-msgid "Updated"
+msgid "Print"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Premium"
+msgid "Printer selection"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
-msgid "Search materials"
+msgid "Delete"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
+msgctxt "@label"
+msgid "Resume"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+msgctxt "@label"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+msgctxt "@label"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
+msgctxt "@label"
+msgid "Pause"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
-msgid "Will install upon restarting"
+msgid "Abort"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+msgctxt "@window:title"
+msgid "Move print job to top"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
-msgctxt "@action:button"
-msgid "Install"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+msgctxt "@window:title"
+msgid "Delete print job"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
+msgctxt "@window:title"
+msgid "Abort print"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
-msgctxt "@label"
-msgid ""
-"The following packages can not be installed because of an incompatible Cura "
-"version:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid ""
-"You are uninstalling materials and/or profiles that are still in use. "
-"Confirming will reset the following materials/profiles to their defaults."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
-msgctxt "@label"
-msgid "Email"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+msgctxt "@label:status"
+msgid "Loading..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+msgctxt "@label:status"
+msgid "Unavailable"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Unreachable"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+msgctxt "@label:status"
+msgid "Idle"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+msgctxt "@label:status"
+msgid "Printing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
-msgid "Brand"
+msgid "Untitled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
-msgid "Downloads"
+msgid "Anonymous"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+msgctxt "@label:status"
+msgid "Requires configuration changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+msgctxt "@action:button"
+msgid "Details"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Community Contributions"
+msgid "Please select any upgrades made to this Ultimaker Original"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "Community Plugins"
+msgid "Heated Build Plate (official kit or self-built)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
-msgid "Generic Materials"
+msgid ""
+"To make sure your prints will come out great, you can now adjust your "
+"buildplate. When you click 'Move to Next Position' the nozzle will move to "
+"the different positions that can be adjusted."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
 msgid ""
-"Could not connect to the Cura Package database. Please check your connection."
+"For every position; insert a piece of paper under the nozzle and adjust the "
+"print build plate height. The print build plate height is right when the "
+"paper is slightly gripped by the tip of the nozzle."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid ""
-"Please sign in to get verified plugins and materials for Ultimaker Cura "
-"Enterprise"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid ""
-"To make sure your prints will come out great, you can now adjust your "
-"buildplate. When you click 'Move to Next Position' the nozzle will move to "
-"the different positions that can be adjusted."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid ""
-"For every position; insert a piece of paper under the nozzle and adjust the "
-"print build plate height. The print build plate height is right when the "
-"paper is slightly gripped by the tip of the nozzle."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid ""
-"To print directly to your printer over the network, please make sure your "
-"printer is connected to the network using a network cable or by connecting "
-"your printer to your WIFI network. If you don't connect Cura with your "
-"printer, you can still use a USB drive to transfer g-code files to your "
-"printer."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "Select your printer from the list below:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-msgctxt "@action:button"
-msgid "Remove"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
 msgctxt "@action:button"
-msgid "Refresh"
+msgid "Open"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
 msgid ""
-"If your printer is not listed, read the <a href='%1'>network printing "
-"troubleshooting guide</a>"
+"Some things could be problematic in this print. Click to see tips for "
+"adjustment."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
-msgid "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
-msgctxt "@label"
-msgid "Firmware version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
-msgctxt "@label"
-msgid "Address"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
-msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
-msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid ""
+"Ultimaker Cura collects anonymous data in order to improve the print quality "
+"and user experience. Below is an example of all the data that is shared:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
-msgctxt "@action:button"
-msgid "Connect"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
-msgctxt "@title:window"
-msgid "Invalid IP address"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+msgctxt "@label"
+msgid "Color scheme"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
-msgctxt "@title:window"
-msgid "Printer Address"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-msgctxt "@action:button"
-msgid "Override"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural ""
-"The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
+msgid "Compatibility Mode"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid ""
-"The printer %1 is assigned, but the job contains an unknown material "
-"configuration."
+msgid "Travels"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
+msgid "Helpers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
+msgid "Shell"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
+msgid "Infill"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
 msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
+msgid "Starts"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid ""
-"Override will use the specified settings with the existing printer "
-"configuration. This may result in a failed print."
+msgid "Only Show Top Layers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
 msgctxt "@label"
-msgid "Glass"
+msgid "Show 5 Detailed Layers On Top"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Aluminum"
+msgid "Top / Bottom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
 msgctxt "@label"
-msgid "Move to top"
+msgid "Inner Wall"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
 msgctxt "@label"
-msgid "Delete"
+msgid "min"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Resume"
+msgid "max"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Pausing..."
+msgid "Nozzle size"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Resuming..."
+msgid "mm"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
 msgctxt "@label"
-msgid "Pause"
+msgid "Compatible material diameter"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
 msgctxt "@label"
-msgid "Aborting..."
+msgid "Nozzle offset X"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
 msgctxt "@label"
-msgid "Abort"
+msgid "Nozzle offset Y"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
-msgctxt "@window:title"
-msgid "Abort print"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+msgctxt "@label"
+msgid "X (Width)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+msgctxt "@label"
+msgid "Build plate shape"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
-msgctxt "@label:status"
-msgid "Printing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
 msgctxt "@label"
-msgid "Untitled"
+msgid "X min"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
 msgctxt "@label"
-msgid "Anonymous"
+msgid "Y min"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
-msgctxt "@label:status"
-msgid "Requires configuration changes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
-msgctxt "@action:button"
-msgid "Details"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
 msgctxt "@label"
-msgid "Unavailable printer"
+msgid "Gantry Height"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "First available"
+msgid "Number of Extruders"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid ""
+"For lithophanes dark pixels should correspond to thicker locations in order "
+"to block more light coming through. For height maps lighter pixels signify "
+"higher terrain, so lighter pixels should correspond to thicker locations in "
+"the generated 3D model."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid ""
+"For lithophanes a simple logarithmic model for translucency is available. "
+"For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
-msgctxt "@label"
-msgid "Printer selection"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid ""
+"The percentage of light penetrating a print with a thickness of 1 "
+"millimeter. Lowering this value increases the contrast in dark regions and "
+"decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
-msgctxt "@label"
-msgid "Your key to connected 3D printing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
-msgctxt "@label"
-msgid "Checking..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
-msgctxt "@label"
-msgid "Account synced"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid ""
+"You don't have any backups currently. Use the 'Backup Now' button to create "
+"one."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
-msgctxt "@label"
-msgid "Something went wrong..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid ""
+"During the preview phase, you'll be limited to 5 visible backups. Remove a "
+"backup to see older ones."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Install pending updates"
+msgid "Want more?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Check for account updates"
+msgid "Backup Now"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Preview"
+msgid "Restore"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid ""
+"You will need to restart Cura before your backup is restored. Do you want to "
+"close Cura now?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Slice"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
 msgctxt "@label"
-msgid "Start the slicing process"
+msgid "Select configuration"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid ""
+"This configuration is not available because %1 is not recognized. Please "
+"visit %2 to download the correct material profile."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid ""
+"The configurations are not available because the printer is disconnected."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
+msgid "&Camera position"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
+msgid "Camera view"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
+msgid "Perspective"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
+msgid "Orthographic"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
+msgid "Visible Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the "
+"profile.\n"
+"\n"
+"Click to open the profile manager."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid ""
+"Gradual infill will gradually increase the amount of infill towards the top."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid ""
+"You have modified some profile settings. If you want to change these go to "
+"custom mode."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid ""
+"Generate structures to support parts of the model which have overhangs. "
+"Without these structures, such parts would collapse during printing."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
+msgid "Adhesion"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid ""
+"Enable printing a brim or raft. This will add a flat area around or under "
+"your object which is easy to cut off afterwards."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt ""
+"@label %1 is filled in with the type of a profile. %2 is filled with a list "
+"of numbers (eg '1' or '1, 2')"
+msgid ""
+"There is no %1 profile for the configuration in extruder %2. The default "
+"intent will be used instead"
+msgid_plural ""
+"There is no %1 profile for the configurations in extruders %2. The default "
+"intent will be used instead"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
+msgid "Discard or Keep changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid ""
-"We have found one or more G-Code files within the files you have selected. "
-"You can only open one G-Code file at a time. If you want to open a G-Code "
-"file, please just select only one."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+msgctxt "@text:window"
+msgid ""
+"We have found one or more project file(s) within the files you have "
+"selected. You can open only one project file at a time. We suggest to only "
+"import models from those files. Would you like to proceed?"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+msgctxt "@action:label"
+msgid "Material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+msgctxt "@action:button"
+msgid "Save"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
 msgctxt "@title:window"
 msgid "Open project file"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
 msgctxt "@text:window"
 msgid ""
 "This is a Cura project file. Would you like to open it as a project or "
 "import the models from it?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
 msgctxt "@text:window"
 msgid "Remember my choice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
 msgctxt "@action:button"
 msgid "Open as project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
 msgctxt "@action:button"
 msgid "Import models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
+msgctxt "@text Print job name"
+msgid "Untitled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
 msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+"Please follow these steps to set up Ultimaker Cura. This will only take a "
+"few moments."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid ""
+"Ultimaker Cura collects anonymous data to improve print quality and user "
+"experience, including:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
-msgctxt "@text:window"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
 msgid ""
-"We have found one or more project file(s) within the files you have "
-"selected. You can open only one project file at a time. We suggest to only "
-"import models from those files. Would you like to proceed?"
+"Data collected by Ultimaker Cura will not contain any personal information."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
-msgctxt "@action:button"
-msgid "Import all as models"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
-msgctxt "@title:window"
-msgid "Save Project"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
-msgctxt "@action:label"
-msgid "Extruder %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
-msgctxt "@action:label"
-msgid "%1 & material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
-msgctxt "@action:label"
-msgid "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+msgctxt "@label"
+msgid "Could not connect to device."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
-msgctxt "@action:button"
-msgid "Save"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+msgctxt "@label"
+msgid ""
+"This printer cannot be added because it's an unknown printer or it's not the "
+"host of a group."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+msgctxt "@label"
+msgid "Add a non-networked printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
+msgctxt "@label"
+msgid "What's New"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+msgctxt "@label"
+msgid "Add a Cloud printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
+msgctxt "@label"
+msgid "Waiting for Cloud response"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
+msgctxt "@label"
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid ""
-"Are you sure you want to start a new project? This will clear the build "
-"plate and any unsaved settings."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
+msgctxt "@label"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid ""
-"This configuration is not available because %1 is not recognized. Please "
-"visit %2 to download the correct material profile."
+msgid "User Agreement"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Marketplace"
+msgid "Release Notes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
+msgid "There is no printer found over your network."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
 msgctxt "@label"
-msgid ""
-"The configurations are not available because the printer is disconnected."
+msgid "Refresh"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
 msgctxt "@label"
-msgid "Select configuration"
+msgid "Add printer by IP"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
 msgctxt "@label"
-msgid "Configurations"
+msgid "Add cloud printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
 msgctxt "@label"
-msgid "Printer"
+msgid "Manufacturer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
 msgctxt "@label"
-msgid "Enabled"
+msgid "Profile author"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
 msgctxt "@label"
-msgid "Material"
+msgid "Printer name"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
+msgid "Checking..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] ""
-msgstr[1] ""
+msgid "Account synced"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
 msgctxt "@label"
-msgid "Number of Copies"
+msgid "Object list"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
+msgctxt "@action:inmenu"
+msgid "Show Online Troubleshooting Guide"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
+msgctxt "@action:inmenu"
+msgid "Toggle Full Screen"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
+msgctxt "@action:inmenu menubar:view"
+msgid "3D View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
+msgctxt "@action:inmenu menubar:view"
+msgid "Front View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
+msgctxt "@action:inmenu menubar:view"
+msgid "Top View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
+msgctxt "@action:inmenu menubar:view"
+msgid "Left Side View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
+msgctxt "@action:inmenu menubar:view"
+msgid "Right Side View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
 msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
+msgid "Configure Cura..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
 msgctxt "@action:inmenu"
-msgid "Enable Extruder"
+msgid "Manage Materials..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
 msgctxt "@action:inmenu"
-msgid "Disable Extruder"
+msgid "Add more materials from Marketplace"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
+msgid "Delete Model"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+msgid "Ce&nter Model on Platform"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
+msgid "&Multiply Model..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
-msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid ""
+"The new filament diameter is set to %1 mm, which is not compatible with the "
+"current extruder. Do you wish to continue?"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
+msgid "Display Name"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
+msgid "Material Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
+msgid "Color"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+msgid "Properties"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+msgid "Density"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+msgid "Diameter"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
+msgid "Filament weight"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid ""
+"Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid ""
+"Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid ""
+"This profile uses the defaults specified by the printer, so it has no "
+"settings/overrides in the list below."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid ""
 "You will need to restart the application for these changes to have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid ""
 "Highlight unsupported areas of the model in red. Without support these areas "
 "will not print properly."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid ""
 "Highlight missing or extraneous surfaces of the model using warning signs. "
 "The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid ""
 "Moves the camera so the model is in the center of the view when a model is "
 "selected"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid ""
 "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid ""
 "Should models on the platform be moved so that they no longer intersect?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid ""
 "Should opening files from the desktop or external applications open in the "
 "same instance of Cura?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid ""
 "An model may appear extremely small if its unit is for example in meters "
 "rather than millimeters. Should these models be scaled up?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid ""
 "Should a prefix based on the printer name be added to the print job name "
 "automatically?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid ""
 "When you have made changes to a profile and switched to a different one, a "
@@ -4574,45 +5055,39 @@ msgid ""
 "not, or you can choose a default behaviour and never show that dialog again."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid ""
 "Default behavior for changed setting values when switching to a different "
 "profile: "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid ""
 "Should anonymous data about your print be sent to Ultimaker? Note, no "
@@ -4620,338 +5095,216 @@ msgid ""
 "stored."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid ""
-"Could not import material <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid ""
-"Failed to export material to <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid ""
-"The new filament diameter is set to %1 mm, which is not compatible with the "
-"current extruder. Do you wish to continue?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
+msgid "Abort Print"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
+msgid "Are you sure you want to abort the print?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
+msgid ""
+"Some hidden settings use values different from their normal calculated "
+"value.\n"
+"\n"
+"Click to make these settings visible."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
+msgid ""
+"This setting is not used because all the settings that it influences are "
+"overridden."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
+msgid ""
+"This setting is always shared between all extruders. Changing it here will "
+"change the value for all extruders."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
+msgid "This setting is resolved from conflicting extruder-specific values:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
 msgid ""
-"This profile uses the defaults specified by the printer, so it has no "
-"settings/overrides in the list below."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
+"This setting is normally calculated, but it currently has an absolute value "
+"set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid ""
 "The target temperature of the hotend. The hotend will heat up or cool down "
 "towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid ""
 "Heat the hotend in advance before printing. You can continue adjusting your "
@@ -4959,44 +5312,44 @@ msgid ""
 "up when you're ready to print."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid ""
 "The target temperature of the heated bed. The bed will heat up or cool down "
 "towards this temperature. If this is 0, the bed heating is turned off."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid ""
 "Heat the bed in advance before printing. You can continue adjusting your "
@@ -5004,1167 +5357,865 @@ msgid ""
 "when you're ready to print."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid ""
 "Send a custom G-code command to the connected printer. Press 'enter' to send "
 "the command."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid ""
-"The cloud printer is offline. Please check if the printer is turned on and "
-"connected to the internet."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid ""
-"This printer is not linked to your account. Please visit the Ultimaker "
-"Digital Factory to establish a connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid ""
-"The cloud connection is currently unavailable. Please sign in to connect to "
-"the cloud printer."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid ""
-"The cloud connection is currently unavailable. Please check your internet "
-"connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Connected printers"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Printing Time"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Estimated time left"
+msgid "Infill overlapping with this model is modified."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the "
-"profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt ""
-"@label %1 is filled in with the type of a profile. %2 is filled with a list "
-"of numbers (eg '1' or '1, 2')"
-msgid ""
-"There is no %1 profile for the configuration in extruder %2. The default "
-"intent will be used instead"
-msgid_plural ""
-"There is no %1 profile for the configurations in extruders %2. The default "
-"intent will be used instead"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
 msgid ""
-"Enable printing a brim or raft. This will add a flat area around or under "
-"your object which is easy to cut off afterwards."
+"Are you sure you want to start a new project? This will clear the build "
+"plate and any unsaved settings."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid "Gradual infill"
+msgid "This package will be installed after restarting."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid ""
-"Gradual infill will gradually increase the amount of infill towards the top."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid ""
-"You have modified some profile settings. If you want to change these go to "
-"custom mode."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid ""
-"Generate structures to support parts of the model which have overhangs. "
-"Without these structures, such parts would collapse during printing."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated "
-"value.\n"
-"\n"
-"Click to make these settings visible."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
 msgid ""
-"This setting is not used because all the settings that it influences are "
-"overridden."
+"We have found one or more G-Code files within the files you have selected. "
+"You can only open one G-Code file at a time. If you want to open a G-Code "
+"file, please just select only one."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
 msgid ""
-"This setting is always shared between all extruders. Changing it here will "
-"change the value for all extruders."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
+"The cloud printer is offline. Please check if the printer is turned on and "
+"connected to the internet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
 msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
+"This printer is not linked to your account. Please visit the Ultimaker "
+"Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
 msgid ""
-"This setting is normally calculated, but it currently has an absolute value "
-"set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+"The cloud connection is currently unavailable. Please sign in to connect to "
+"the cloud printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid ""
+"The cloud connection is currently unavailable. Please check your internet "
+"connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
+msgid "Add printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
+msgid "Manage printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
+msgid "Connected printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
+msgid "Preset printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
+msgid "Time estimation"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
+msgid "Material estimation"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid ""
-"This printer cannot be added because it's an unknown printer or it's not the "
-"host of a group."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
+msgid "Processing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
+msgid "Slice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+msgid "Start the slicing process"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid ""
-"Ultimaker Cura collects anonymous data to improve print quality and user "
-"experience, including:"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid ""
-"Data collected by Ultimaker Cura will not contain any personal information."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
+msgid "Cancel"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "User Agreement"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
+msgid "No time estimation available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
+msgid "No cost estimation available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Get started"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
+msgid "Preview"
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
-msgid ""
-"Checks models and print configuration for possible printing issues and give "
-"suggestions."
+msgid "Provides removable drive hotplugging and writing support."
 msgstr ""
 
-#: ModelChecker/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "name"
-msgid "Model Checker"
+msgid "Removable Drive Output Device Plugin"
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
 msgstr ""
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
+msgid "Version Upgrade 3.5 to 4.0"
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
 msgstr ""
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
+msgid "Version Upgrade 2.2 to 2.4"
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
+msgid "Version Upgrade 4.2 to 4.3"
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
 msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
+msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
 msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
+msgid "Version Upgrade 4.0 to 4.1"
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
 msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
+msgid "Version Upgrade 2.6 to 2.7"
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
+msgid "Version Upgrade 2.5 to 2.6"
 msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
 msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
+msgid "Version Upgrade 4.1 to 4.2"
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
+msgid "Version Upgrade 2.1 to 2.2"
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
 msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
+msgid "Version Upgrade 3.2 to 3.3"
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
+msgid "Version Upgrade 4.4 to 4.5"
 msgstr ""
 
-#: ImageReader/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
 msgstr ""
 
-#: ImageReader/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Image Reader"
+msgid "Version Upgrade 4.7 to 4.8"
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
 msgstr ""
 
-#: LegacyProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
+msgid "Version Upgrade 3.3 to 3.4"
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid ""
-"Provides a way to change machine settings (such as build volume, nozzle "
-"size, etc.)."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
 msgstr ""
 
-#: MachineSettingsAction/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
+msgid "Version Upgrade 4.3 to 4.4"
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
+msgid "Version Upgrade 3.4 to 3.5"
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
+msgid "Version Upgrade 2.7 to 3.0"
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
+msgid "Provides support for reading AMF files."
 msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Post Processing"
+msgid "AMF Reader"
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
+msgid "Provides support for importing profiles from g-code files."
 msgstr ""
 
-#: PrepareStage/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
+msgid "G-code Profile Reader"
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
+msgid "Provides a machine actions for updating firmware."
 msgstr ""
 
-#: PreviewStage/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
+msgid "Firmware Updater"
 msgstr ""
 
-#: RemovableDriveOutputDevice/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
+msgid "Provides support for reading X3D files."
 msgstr ""
 
-#: RemovableDriveOutputDevice/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
+msgid "X3D Reader"
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
+msgid "Find, manage and install new Cura packages."
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
+msgid "Toolbox"
 msgstr ""
 
-#: SimulationView/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
+msgid "Provides the Per Model Settings."
 msgstr ""
 
-#: SimulationView/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "Simulation View"
+msgid "Per Model Settings Tool"
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgid "Extension that allows for user created scripts for post processing"
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "Slice info"
+msgid "Post Processing"
 msgstr ""
 
-#: SolidView/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
+msgid "Provides the link to the CuraEngine slicing backend."
 msgstr ""
 
-#: SolidView/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Solid View"
+msgid "CuraEngine Backend"
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
 msgid ""
-"Creates an eraser mesh to block the printing of support in certain places"
+"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
+msgid "USB printing"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
+msgid "Provides support for exporting Cura profiles."
 msgstr ""
 
-#: Toolbox/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Toolbox"
+msgid "Cura Profile Writer"
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Manages network connections to Ultimaker networked printers."
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
+msgid "Ultimaker Network Connection"
 msgstr ""
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
+msgid ""
+"Provides machine actions for Ultimaker machines (such as bed leveling "
+"wizard, selecting upgrades, etc.)."
 msgstr ""
 
-#: UFPReader/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
+msgid "Ultimaker machine actions"
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
+msgid "Provides support for reading 3MF files."
 msgstr ""
 
-#: UFPWriter/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
+msgid "3MF Reader"
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid ""
-"Provides machine actions for Ultimaker machines (such as bed leveling "
-"wizard, selecting upgrades, etc.)."
+msgid "Writes g-code to a compressed archive."
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
+msgid "Compressed G-code Writer"
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
+msgid "Reads g-code from a compressed archive."
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
+msgid "Compressed G-code Reader"
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
 msgid ""
-"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+"Checks models and print configuration for possible printing issues and give "
+"suggestions."
 msgstr ""
 
-#: USBPrinting/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "USB printing"
+msgid "Model Checker"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgid "Checks for firmware updates."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
+msgid "Firmware Update Checker"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgid "Allows loading and displaying G-code files."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
+msgid "G-code Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgid ""
+"Creates an eraser mesh to block the printing of support in certain places"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
+msgid "Support Eraser"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgid "Provides support for reading model files."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
+msgid "Trimesh Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgid "Logs certain events so that they can be used by the crash reporter"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
+msgid "Sentry Logger"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgid "Provides support for reading Ultimaker Format Packages."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
+msgid "UFP Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgid "Provides support for importing profiles from legacy Cura versions."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
+msgid "Legacy Cura Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgid "Provides a prepare stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
+msgid "Prepare Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgid "Provides a monitor stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
+msgid "Monitor Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgid "Provides the X-Ray view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
+msgid "X-Ray View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgid "Provides support for writing 3MF files."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
+msgid "3MF Writer"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
+msgid "Slice info"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
+msgid "Preview Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Provides the Simulation view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Simulation View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgid ""
+"Provides a way to change machine settings (such as build volume, nozzle "
+"size, etc.)."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
+msgid "Machine Settings Action"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgid "Provides capabilities to read and write XML-based material profiles."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
+msgid "Material Profiles"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgid "Provides a normal solid mesh view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgid "Solid View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgid "Provides support for importing Cura profiles."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
+msgid "Cura Profile Reader"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgid "Provides support for writing Ultimaker Format Packages."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
+msgid "UFP Writer"
 msgstr ""
 
-#: X3DReader/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
+msgid "Writes g-code to a file."
 msgstr ""
 
-#: X3DReader/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
+msgid "G-code Writer"
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
+msgid "Enables ability to generate printable geometry from 2D image files."
 msgstr ""
 
-#: XmlMaterialProfile/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
+msgid "Image Reader"
 msgstr ""
 
-#: XRayView/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
+msgid "Backup and restore your configuration."
 msgstr ""
 
-#: XRayView/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
+msgid "Cura Backups"
 msgstr ""
diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po
index 5743da88dc..1d454285c3 100644
--- a/resources/i18n/de_DE/cura.po
+++ b/resources/i18n/de_DE/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:27+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Unbekannt"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Geräte werden geladen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Der/die nachfolgende(n) Drucker kann/können nicht verbunden werden, weil er/sie Teil einer Gruppe ist/sind"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Erstellungen werden eingerichtet ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Verfügbare vernetzte Drucker"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Aktives Gerät wird initialisiert ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nicht überschrieben"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Gerätemanager wird initialisiert ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Möchten Sie {0} wirklich entfernen? Der Vorgang kann nicht rückgängig gemacht werden!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Bauraum wird initialisiert ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Die Szene wird eingerichtet..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visuell"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Die Benutzeroberfläche wird geladen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Das visuelle Profil wurde für den Druck visueller Prototypen und Modellen entwickelt, bei denen das Ziel eine hohe visuelle Qualität und eine hohe Oberflächenqualität ist."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Funktion wird initialisiert ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Das Engineering-Profil ist für den Druck von Funktionsprototypen und Endnutzungsteilen gedacht, bei denen Präzision gefragt ist und engere Toleranzen gelten."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Es kann nur jeweils ein G-Code gleichzeitig geladen werden. Wichtige {0} werden übersprungen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Entwurf"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Warnhinweis"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Das Entwurfsprofil wurde für erste Prototypen und die Konzeptvalidierung entwickelt, um einen deutlich schnelleren Druck zu ermöglichen."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Wenn G-Code geladen wird, kann keine weitere Datei geöffnet werden. Wichtige {0} werden übersprungen."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Fehler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Möchten Sie {0} wirklich entfernen? Der Vorgang kann nicht rückgängig gemacht werden!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Benutzerdefiniertes Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Benutzerdefiniert"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Unbekannt"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Benutzerdefinierte Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Alle unterstützten Typen ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Alle Dateien (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login fehlgeschlagen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Neue Position für Objekte finden"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Position finden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visuell"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Innerhalb der Druckabmessung für alle Objekte konnte keine Position gefunden werden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Das visuelle Profil wurde für den Druck visueller Prototypen und Modellen entwickelt, bei denen das Ziel eine hohe visuelle Qualität und eine hohe Oberflächenqualität ist."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Kann Position nicht finden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Konnte kein Archiv von Benutzer-Datenverzeichnis {} erstellen"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Das Engineering-Profil ist für den Druck von Funktionsprototypen und Endnutzungsteilen gedacht, bei denen Präzision gefragt ist und engere Toleranzen gelten."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Entwurf"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Versucht, ein Cura-Backup-Verzeichnis ohne entsprechende Daten oder Metadaten wiederherzustellen."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Das Entwurfsprofil wurde für erste Prototypen und die Konzeptvalidierung entwickelt, um einen deutlich schnelleren Druck zu ermöglichen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Versucht, ein Cura-Backup wiederherzustellen, das eine höhere Version als die aktuelle hat."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Der/die nachfolgende(n) Drucker kann/können nicht verbunden werden, weil er/sie Teil einer Gruppe ist/sind"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Die Höhe der Druckabmessung wurde aufgrund des Wertes der Einstellung „Druckreihenfolge“ reduziert, um eine Kollision der Brücke mit den gedruckten Modellen zu verhindern."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Verfügbare vernetzte Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Produktabmessungen"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nicht überschrieben"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura kann nicht starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Senden Sie uns diesen Absturzbericht bitte, um das Problem zu beheben.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Absturzbericht an Ultimaker senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Detaillierten Absturzbericht anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Konfigurationsordner anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Backup und Reset der Konfiguration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Crash-Bericht"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1079 +249,780 @@ msgstr ""
 "            <p>Verwenden Sie bitte die Schaltfläche „Bericht senden“, um den Fehlerbericht automatisch an unsere Server zu senden</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Systeminformationen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Unbekannt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura-Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura-Sprache"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Sprache des Betriebssystems"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plattform"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Noch nicht initialisiert<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL-Version: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL-Anbieter: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL-Renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Fehler-Rückverfolgung"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Protokolle"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Bericht senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Geräte werden geladen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Erstellungen werden eingerichtet ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Aktives Gerät wird initialisiert ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Gerätemanager wird initialisiert ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Bauraum wird initialisiert ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Die Szene wird eingerichtet..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Die Benutzeroberfläche wird geladen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Funktion wird initialisiert ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Es kann nur jeweils ein G-Code gleichzeitig geladen werden. Wichtige {0} werden übersprungen."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Warnhinweis"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Wenn G-Code geladen wird, kann keine weitere Datei geöffnet werden. Wichtige {0} werden übersprungen."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Fehler"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Objekte vervielfältigen und platzieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Objekte platzieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Objekt-Platzierung"
+msgid "Login failed"
+msgstr "Login fehlgeschlagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Antwort konnte nicht gelesen werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Es kann kein neuer Anmeldevorgang gestartet werden. Bitte überprüfen Sie, ob noch ein weiterer Anmeldevorgang aktiv ist."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Der Ultimaker-Konto-Server konnte nicht erreicht werden."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "Angegebener Status ist falsch."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Erteilen Sie bitte die erforderlichen Freigaben bei der Autorisierung dieser Anwendung."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Bei dem Versuch, sich anzumelden, trat ein unerwarteter Fehler auf. Bitte erneut versuchen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Es kann kein neuer Anmeldevorgang gestartet werden. Bitte überprüfen Sie, ob noch ein weiterer Anmeldevorgang aktiv ist."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Der Ultimaker-Konto-Server konnte nicht erreicht werden."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Datei bereits vorhanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Die Datei <filename>{0}</filename> ist bereits vorhanden. Soll die Datei wirklich überschrieben werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Ungültige Datei-URL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Düse"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Die Einstellungen wurden an die aktuell verfügbaren Extruder angepasst:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Einstellungen aktualisiert"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder deaktiviert"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Export des Profils nach <filename>{0}</filename> fehlgeschlagen: Fehlermeldung von Writer-Plugin."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil wurde nach <filename>{0}</filename> exportiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Export erfolgreich ausgeführt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Import des Profils aus Datei <filename>{0}</filename>: {1} fehlgeschlagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Import des Profils aus Datei <filename>{0}</filename> kann erst durchgeführt werden, wenn ein Drucker hinzugefügt wurde."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Kein benutzerdefiniertes Profil für das Importieren in Datei <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Dieses Profil <filename>{0}</filename> enthält falsche Daten, Importieren nicht möglich."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Import des Profils aus Datei <filename>{0}</filename> fehlgeschlagen:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Profil {0} erfolgreich importiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Datei {0} enthält kein gültiges Profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profil {0} hat einen unbekannten Dateityp oder ist beschädigt."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Benutzerdefiniertes Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Für das Profil fehlt eine Qualitätsangabe."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Globaler Stack fehlt."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Das Profil kann nicht hinzugefügt werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Der Qualitätstyp „{0}“ ist nicht mit der aktuell aktiven Maschinendefinition „{1}“ kompatibel."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Warnung: Das Profil wird nicht angezeigt, weil sein Qualitätstyp „{0}“ für die aktuelle Konfiguration nicht verfügbar ist. Wechseln Sie zu einer Material-/Düsenkombination, die mit diesem Qualitätstyp kompatibel ist."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Nicht unterstützt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Düse"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Die Einstellungen wurden an die aktuell verfügbaren Extruder angepasst:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Neue Position für Objekte finden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Einstellungen aktualisiert"
+msgid "Finding Location"
+msgstr "Position finden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Innerhalb der Druckabmessung für alle Objekte konnte keine Position gefunden werden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder deaktiviert"
+msgid "Can't Find Location"
+msgstr "Kann Position nicht finden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Gruppe #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Hinzufügen"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Beenden"
+msgid "Close"
+msgstr "Schließen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Abbrechen"
+msgid "Next"
+msgstr "Weiter"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Gruppe #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Beenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Außenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Innenwände"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Außenhaut"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Füllung"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Stützstruktur-Füllung"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Stützstruktur-Schnittstelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Stützstruktur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Einzugsturm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Bewegungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Einzüge"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Sonstige"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Weiter"
+msgid "Add"
+msgstr "Hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Schließen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-Modell-Assistent"
+msgid "Cancel"
+msgstr "Abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Ein oder mehrere 3D-Modelle können möglicherweise aufgrund der Modellgröße und Materialkonfiguration nicht optimal gedruckt werden:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Erfahren Sie, wie Sie die bestmögliche Druckqualität und Zuverlässigkeit sicherstellen.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Leitfaden zu Druckqualität anzeigen</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projektdatei <filename>{0}</filename> enthält einen unbekannten Maschinentyp <message>{1}</message>. Importieren der Maschine ist nicht möglich. Stattdessen werden die Modelle importiert."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projektdatei öffnen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Auf Projektdatei <filename>{0}</filename> kann plötzlich nicht mehr zugegriffen werden: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Projektdatei kann nicht geöffnet werden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Projektdatei <filename>{0}</filename> verwendet Profile, die nicht mit dieser Ultimaker Cura-Version kompatibel sind."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Empfohlen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Das 3MF-Writer-Plugin ist beschädigt."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Keine Erlaubnis zum Beschreiben dieses Arbeitsbereichs."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Das Betriebssystem erlaubt es nicht, eine Projektdatei an diesem Speicherort oder mit diesem Dateinamen zu speichern."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Fehler beim Schreiben von 3MF-Datei."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura-Projekt 3MF-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF-Datei"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Die Höhe der Druckabmessung wurde aufgrund des Wertes der Einstellung „Druckreihenfolge“ reduziert, um eine Kollision der Brücke mit den gedruckten Modellen zu verhindern."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Backups"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Beim Versuch, Ihr Backup hochzuladen, trat ein Fehler auf."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Ihr Backup wird erstellt..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Beim Erstellen Ihres Backups ist ein Fehler aufgetreten."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Ihr Backup wird hochgeladen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Ihr Backup wurde erfolgreich hochgeladen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Das Backup überschreitet die maximale Dateigröße."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Beim Versuch, Ihr Backup wiederherzustellen, trat ein Fehler auf."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Backups verwalten"
+msgid "Build Volume"
+msgstr "Produktabmessungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Slicing mit dem aktuellen Material nicht möglich, da es mit der gewählten Maschine oder Konfiguration nicht kompatibel ist."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Konnte kein Archiv von Benutzer-Datenverzeichnis {} erstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Slicing nicht möglich"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Die aktuellen Einstellungen lassen kein Schneiden (Slicing) zu. Die folgenden Einstellungen sind fehlerhaft:{0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Aufgrund der Pro-Modell-Einstellungen ist kein Schneiden (Slicing) möglich. Die folgenden Einstellungen sind für ein oder mehrere Modelle fehlerhaft: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Schneiden (Slicing) ist nicht möglich, da der Einzugsturm oder die Einzugsposition(en) ungültig ist (sind)."
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Schneiden (Slicing) ist nicht möglich, da Objekte vorhanden sind, die mit dem deaktivierten Extruder %s verbunden sind."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Versucht, ein Cura-Backup-Verzeichnis ohne entsprechende Daten oder Metadaten wiederherzustellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Bitte überprüfen Sie die Einstellungen und prüfen Sie, ob Ihre Modelle:\n"
-"- Mit der Druckraumgröße kompatibel sind\n"
-"- Einem aktiven Extruder zugewiesen sind\n"
-"- Nicht alle als Modifier Meshes eingerichtet sind"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Versucht, ein Cura-Backup wiederherzustellen, das eine höhere Version als die aktuelle hat."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Schichten werden verarbeitet"
+msgid "Multiplying and placing objects"
+msgstr "Objekte vervielfältigen und platzieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informationen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Zugriff auf Update-Informationen nicht möglich."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Für Ihren {machine_name} sind eventuell neue Funktionen oder Fehlerbereinigungen verfügbar! Falls Sie nicht bereits die aktuellste Version verwenden, empfehlen wir Ihnen, ein Firmware-Update Ihres Druckers auf Version {latest_version} auszuführen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Neue Firmware für %s verfügbar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Anleitung für die Aktualisierung"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware aktualisieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Komprimierte G-Code-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeWriter unterstützt keinen Textmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-Code-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-Code parsen"
+msgid "Placing Objects"
+msgstr "Objekte platzieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-Code-Details"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Stellen Sie sicher, dass der G-Code für Ihren Drucker und Ihre Druckerkonfiguration geeignet ist, bevor Sie die Datei senden. Der Darstellung des G-Codes ist möglicherweise nicht korrekt."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G-Datei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter unterstützt keinen Nicht-Textmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Vor dem Exportieren bitte G-Code vorbereiten."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-Bilddatei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-Bilddatei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-Bilddatei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-Bilddatei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-Bilddatei"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04-Profile"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Geräteeinstellungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Überwachen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Einstellungen pro Objekt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Pro Objekteinstellungen konfigurieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Nachbearbeitung"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-Code ändern"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Vorbereiten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Vorschau"
+msgid "Placing Object"
+msgstr "Objekt-Platzierung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Speichern auf Wechseldatenträger"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Auf Wechseldatenträger speichern {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Es sind keine Dateiformate zum Schreiben vorhanden!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Wird auf Wechseldatenträger gespeichert <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Wird gespeichert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Konnte nicht als <filename>{0}</filename> gespeichert werden: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Bei dem Versuch, auf {device} zu schreiben, wurde ein Dateiname nicht gefunden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Konnte nicht auf dem Wechseldatenträger gespeichert werden {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Auf Wechseldatenträger {0} gespeichert als {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Datei wurde gespeichert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Auswerfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Wechseldatenträger auswerfen {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Ausgeworfen {0}. Sie können den Datenträger jetzt sicher entfernen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardware sicher entfernen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Auswurf fehlgeschlagen {0}. Möglicherweise wird das Laufwerk von einem anderen Programm verwendet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Wechseldatenträger"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura zeigt die Schichten nicht präzise an, wenn „Drucken mit Drahtstruktur“ aktiviert ist."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simulationsansicht"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Es kann nichts angezeigt werden, weil Sie zuerst das Slicing vornehmen müssen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Keine anzeigbaren Schichten vorhanden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Diese Meldung nicht mehr anzeigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Schichtenansicht"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Ihrem Modell fehlen Schichten. Die fehlenden oder fehlerhaften Bereiche sind hervorgehoben."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Modellfehler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Solide Ansicht"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Stützstruktur-Blocker"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Erstellt ein Volumen, in dem keine Stützstrukturen gedruckt werden."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Möchten Sie Material- und Softwarepakete mit Ihrem Konto synchronisieren?"
+msgid "AMF File"
+msgstr "AMF-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Von Ihrem Ultimaker-Konto erkannte Änderungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-Code-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchronisieren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronisierung läuft ..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Ablehnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Stimme zu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Plugin für Lizenzvereinbarung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Ablehnen und vom Konto entfernen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} Plugins konnten nicht heruntergeladen werden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchronisierung läuft ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Von Ihrem Ultimaker-Konto erkannte Änderungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Sie müssen das Programm beenden und neu starten {}, bevor Änderungen wirksam werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} Plugins konnten nicht heruntergeladen werden"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Möchten Sie Material- und Softwarepakete mit Ihrem Konto synchronisieren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Öffnen Sie das komprimierte Dreiecksnetz"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchronisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Einstellungen pro Objekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Pro Objekteinstellungen konfigurieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Nachbearbeitung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-Code ändern"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Slicing mit dem aktuellen Material nicht möglich, da es mit der gewählten Maschine oder Konfiguration nicht kompatibel ist."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Slicing nicht möglich"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Kann nicht in UFP-Datei schreiben:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Die aktuellen Einstellungen lassen kein Schneiden (Slicing) zu. Die folgenden Einstellungen sind fehlerhaft:{0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Druckbett nivellieren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Aufgrund der Pro-Modell-Einstellungen ist kein Schneiden (Slicing) möglich. Die folgenden Einstellungen sind für ein oder mehrere Modelle fehlerhaft: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Upgrades wählen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Schneiden (Slicing) ist nicht möglich, da der Einzugsturm oder die Einzugsposition(en) ungültig ist (sind)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Über Cloud drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Schneiden (Slicing) ist nicht möglich, da Objekte vorhanden sind, die mit dem deaktivierten Extruder %s verbunden sind."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Über Cloud drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Bitte überprüfen Sie die Einstellungen und prüfen Sie, ob Ihre Modelle:\n"
+"- Mit der Druckraumgröße kompatibel sind\n"
+"- Einem aktiven Extruder zugewiesen sind\n"
+"- Nicht alle als Modifier Meshes eingerichtet sind"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Über Cloud verbunden"
+msgid "Processing Layers"
+msgstr "Schichten werden verarbeitet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Unbekannter Fehlercode beim Upload des Druckauftrags: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-Drucken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Über USB drucken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Über USB drucken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Über USB verbunden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Ein USB-Druck wird ausgeführt. Das Schließen von Cura beendet diesen Druck. Sind Sie sicher?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Druck wird bearbeitet. Cura kann keinen weiteren Druck via USB starten, bis der vorherige Druck abgeschlossen wurde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Druck in Bearbeitung"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Anschluss über Netzwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ihr Ultimaker-Konto hat einen neuen Drucker erkannt"
 msgstr[1] "Ihr Ultimaker-Konto hat neue Drucker erkannt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Drucker {name} ({model}) aus Ihrem Konto wird hinzugefügt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1296,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... und {0} weiterer"
 msgstr[1] "... und {0} weitere"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Drucker aus Digital Factory hinzugefügt:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Für einen Drucker ist keine Cloud-Verbindung verfügbar"
 msgstr[1] "Für mehrere Drucker ist keine Cloud-Verbindung verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Dieser Drucker ist nicht mit der Digital Factory verbunden:"
 msgstr[1] "Diese Drucker sind nicht mit der Digital Factory verbunden:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Bitte besuchen Sie {website_link}, um eine Verbindung herzustellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Druckerkonfigurationen speichern"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Drucker entfernen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} wird bis zur nächsten Synchronisierung entfernt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Wenn Sie {printer_name} dauerhaft entfernen möchten, dann besuchen Sie bitte die {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Möchten Sie {printer_name} wirklich vorübergehend entfernen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Drucker entfernen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1375,2100 +1110,2493 @@ msgstr[1] ""
 "Es werden gleich {0} Drucker aus Cura entfernt. Der Vorgang kann nicht rückgängig gemacht werden. \n"
 "Möchten Sie wirklich fortfahren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Es werden gleich alle Drucker aus Cura entfernt. Dieser Vorgang kann nicht rückgängig gemacht werden.Möchten Sie wirklich fortfahren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Druckaufträge mithilfe Ihres Ultimaker-Kontos von einem anderen Ort aus senden und überwachen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Über Cloud drucken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Mit der Ultimaker Digital Factory verbinden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Über Cloud drucken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Erste Schritte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Über Cloud verbunden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Unbekannter Fehlercode beim Upload des Druckauftrags: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Sie versuchen, sich mit einem Drucker zu verbinden, auf dem Ultimaker Connect nicht läuft. Bitte aktualisieren Sie die Firmware des Druckers."
+msgid "tomorrow"
+msgstr "morgen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Drucker aktualisieren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "heute"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura hat Materialprofile entdeckt, die auf dem Host-Drucker der Gruppe {0} noch nicht installiert wurden."
+msgid "Sending Print Job"
+msgstr "Druckauftrag senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Material an Drucker senden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Druckauftrag wird vorbereitet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Sie versuchen, sich mit {0} zu verbinden, aber dieser Drucker ist nicht der Host, der die Gruppe verwaltet. Besuchen Sie die Website, um den Drucker als Host der Gruppe zu konfigurieren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Nicht Host-Drucker der Gruppe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Gruppe konfigurieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Druckaufträge mithilfe Ihres Ultimaker-Kontos von einem anderen Ort aus senden und überwachen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Mit der Ultimaker Digital Factory verbinden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Erste Schritte"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Bitte warten Sie, bis der aktuelle Druckauftrag gesendet wurde."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Druckfehler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Daten konnten nicht in Drucker geladen werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Netzwerkfehler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Druckauftrag senden"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura hat Materialprofile entdeckt, die auf dem Host-Drucker der Gruppe {0} noch nicht installiert wurden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Druckauftrag wird vorbereitet."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Material an Drucker senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "Die Druckauftragswarteschlange ist voll. Der Drucker kann keinen neuen Auftrag annehmen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Warteschlange voll"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Der Druckauftrag wurde erfolgreich an den Drucker gesendet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Daten gesendet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Sie versuchen, sich mit einem Drucker zu verbinden, auf dem Ultimaker Connect nicht läuft. Bitte aktualisieren Sie die Firmware des Druckers."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Drucker aktualisieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Drucken über Netzwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Drücken über Netzwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Über Netzwerk verbunden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Anschluss über Netzwerk"
+msgid "Select upgrades"
+msgstr "Upgrades wählen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "morgen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Druckbett nivellieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "heute"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Empfohlen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-Drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Über USB drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projektdatei <filename>{0}</filename> enthält einen unbekannten Maschinentyp <message>{1}</message>. Importieren der Maschine ist nicht möglich. Stattdessen werden die Modelle importiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Über USB drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projektdatei öffnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Über USB verbunden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Auf Projektdatei <filename>{0}</filename> kann plötzlich nicht mehr zugegriffen werden: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Ein USB-Druck wird ausgeführt. Das Schließen von Cura beendet diesen Druck. Sind Sie sicher?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Projektdatei kann nicht geöffnet werden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Druck wird bearbeitet. Cura kann keinen weiteren Druck via USB starten, bis der vorherige Druck abgeschlossen wurde."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Druck in Bearbeitung"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Projektdatei <filename>{0}</filename> verwendet Profile, die nicht mit dieser Ultimaker Cura-Version kompatibel sind."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-Datei"
+msgid "3MF File"
+msgstr "3MF-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen-Ansicht"
+msgid "Compressed G-code File"
+msgstr "Komprimierte G-Code-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Einige Punkte bei diesem Druck könnten problematisch sein. Klicken Sie, um Tipps für die Anpassung zu erhalten."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeWriter unterstützt keinen Textmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Projekt öffnen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-Modell-Assistent"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Vorhandenes aktualisieren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Ein oder mehrere 3D-Modelle können möglicherweise aufgrund der Modellgröße und Materialkonfiguration nicht optimal gedruckt werden:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Erfahren Sie, wie Sie die bestmögliche Druckqualität und Zuverlässigkeit sicherstellen.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Leitfaden zu Druckqualität anzeigen</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Neu erstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Zugriff auf Update-Informationen nicht möglich."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Zusammenfassung – Cura-Projekt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Für Ihren {machine_name} sind eventuell neue Funktionen oder Fehlerbereinigungen verfügbar! Falls Sie nicht bereits die aktuellste Version verwenden, empfehlen wir Ihnen, ein Firmware-Update Ihres Druckers auf Version {latest_version} auszuführen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Druckereinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Neue Firmware für %s verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Wie soll der Konflikt im Gerät gelöst werden?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Anleitung für die Aktualisierung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Druckergruppe"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-Code parsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profileinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-Code-Details"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Stellen Sie sicher, dass der G-Code für Ihren Drucker und Ihre Druckerkonfiguration geeignet ist, bevor Sie die Datei senden. Der Darstellung des G-Codes ist möglicherweise nicht korrekt."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Stützstruktur-Blocker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Wie soll der Konflikt im Profil gelöst werden?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Erstellt ein Volumen, in dem keine Stützstrukturen gedruckt werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Name"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Öffnen Sie das komprimierte Dreiecksnetz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nicht im Profil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 überschreiben"
-msgstr[1] "%1 überschreibt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Ableitung von"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 überschreiben"
-msgstr[1] "%1, %2 überschreibt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materialeinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Wie soll der Konflikt im Material gelöst werden?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04-Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Sichtbarkeit einstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Vorbereiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Überwachen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Sichtbare Einstellungen:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen-Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 von %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Fehler beim Schreiben von 3MF-Datei."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Das Laden eines Projekts entfernt alle Modelle von der Druckplatte."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Öffnen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura-Projekt 3MF-Datei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Möchten Sie mehr?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Das 3MF-Writer-Plugin ist beschädigt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Jetzt Backup durchführen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Keine Erlaubnis zum Beschreiben dieses Arbeitsbereichs."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatisches Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Das Betriebssystem erlaubt es nicht, eine Projektdatei an diesem Speicherort oder mit diesem Dateinamen zu speichern."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "An jedem Tag, an dem Cura gestartet wird, ein automatisches Backup erstellen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Vorschau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Wiederherstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Schichtenansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Backup löschen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura zeigt die Schichten nicht präzise an, wenn „Drucken mit Drahtstruktur“ aktiviert ist."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Soll dieses Backup wirklich gelöscht werden? Der Vorgang kann nicht rückgängig gemacht werden."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Simulationsansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Backup wiederherstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Es kann nichts angezeigt werden, weil Sie zuerst das Slicing vornehmen müssen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Cura muss neu gestartet werden, um Ihre Datensicherung wiederherzustellen. Möchten Sie Cura jetzt schließen?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Keine anzeigbaren Schichten vorhanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura-Version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Diese Meldung nicht mehr anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Maschinen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Geräteeinstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materialien"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Solide Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura-Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Meine Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Kann nicht in UFP-Datei schreiben:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Sie verfügen derzeit über keine Backups. Verwenden Sie die Schaltfläche ‚Jetzt Backup erstellen‘, um ein Backup zu erstellen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter unterstützt keinen Nicht-Textmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "In der Vorschau-Phase sind Sie auf 5 sichtbare Backups beschränkt. Ein Backup entfernen, um ältere anzusehen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Vor dem Exportieren bitte G-Code vorbereiten."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Ihre Cura-Einstellungen sichern und synchronisieren."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-Bilddatei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Anmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-Bilddatei"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG-Bilddatei"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP-Bilddatei"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-Bilddatei"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Beim Versuch, Ihr Backup wiederherzustellen, trat ein Fehler auf."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Beim Versuch, Ihr Backup hochzuladen, trat ein Fehler auf."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Ihr Backup wird erstellt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Beim Erstellen Ihres Backups ist ein Fehler aufgetreten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Ihr Backup wird hochgeladen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Ihr Backup wurde erfolgreich hochgeladen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Das Backup überschreitet die maximale Dateigröße."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Backups verwalten"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Die Firmware ist der Teil der Software, der direkt auf Ihrem 3D-Drucker läuft. Diese Firmware kontrolliert die Schrittmotoren, reguliert die Temperatur und sorgt letztlich dafür, dass Ihr Drucker funktioniert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Die mit neuen Druckern gelieferte Firmware funktioniert, allerdings enthalten neue Versionen üblicherweise mehr Funktionen und Verbesserungen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Firmware automatisch aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Benutzerdefinierte Firmware hochladen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Firmware kann nicht aktualisiert werden, da keine Verbindung zum Drucker besteht."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Firmware kann nicht aktualisiert werden, da die Verbindung zum Drucker die Firmware-Aktualisierung nicht unterstützt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Benutzerdefinierte Firmware wählen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware-Aktualisierung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Die Firmware wird aktualisiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Firmware-Aktualisierung abgeschlossen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Die Firmware-Aktualisierung ist aufgrund eines unbekannten Fehlers fehlgeschlagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Die Firmware-Aktualisierung ist aufgrund eines Kommunikationsfehlers fehlgeschlagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Die Firmware-Aktualisierung ist aufgrund eines Eingabe-/Ausgabefehlers fehlgeschlagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Die Firmware-Aktualisierung ist aufgrund von fehlender Firmware fehlgeschlagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Bild konvertieren..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marktplatz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Der Maximalabstand von jedem Pixel von der „Basis“."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Sie müssen die Lizenz akzeptieren, um das Paket zu installieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Höhe (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Änderungen in deinem Konto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Die Basishöhe von der Druckplatte in Millimetern."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Verwerfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Basis (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Weiter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Die Breite der Druckplatte in Millimetern."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Die folgenden Pakete werden hinzugefügt:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Breite (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Die folgenden Pakete können nicht hinzugefügt werden, weil die Cura-Version nicht kompatibel ist:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Die Tiefe der Druckplatte in Millimetern"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Deinstallieren bestätigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Tiefe (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Sie sind dabei, Materialien und/oder Profile zu deinstallieren, die noch verwendet werden. Durch Bestätigen werden die folgenden Materialien/Profile auf ihre Standardeinstellungen zurückgesetzt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Für Lithophanien sollten dunkle Pixel dickeren Positionen entsprechen, um mehr einfallendes Licht zu blockieren. Für Höhenkarten stellen hellere Pixel höheres Terrain dar, sodass hellere Pixel dickeren Positionen im generierten 3D-Modell entsprechen sollten."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materialien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Dunkler ist höher"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Heller ist höher"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Bestätigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Für Lithophanien ist ein einfaches logarithmisches Modell für Transparenz verfügbar. Bei Höhenprofilen entsprechen die Pixelwerte den Höhen linear."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Verbindung zur Cura Paket-Datenbank konnte nicht hergestellt werden. Bitte überprüfen Sie Ihre Verbindung."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Community-Beiträge"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Transparenz"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Community-Plugins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Der Prozentsatz an Licht, der einen Druck von einer Dicke mit 1 Millimeter durchdringt. Senkt man diesen Wert, steigt der Kontrast in den dunkleren Bereichen, während der Kontrast in den helleren Bereichen des Bilds sinkt."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Generische Materialien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 mm Durchlässigkeit (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Die Stärke der Glättung, die für das Bild angewendet wird."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Zuletzt aktualisiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Glättung"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marke"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Downloads"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Drucker"
+msgid "Installed plugins"
+msgstr "Installierte Plugins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Düseneinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Es wurde kein Plugin installiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Düsengröße"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Installierte Materialien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Es wurde kein Material installiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatibler Materialdurchmesser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Gebündelte Plugins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "X-Versatz Düse"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Gebündelte Materialien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Y-Versatz Düse"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Kühllüfter-Nr."
+msgid "Email"
+msgstr "E-Mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-Code Extruder-Start"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Bitte melden Sie sich an, um verifizierte Plugins und Materialien für Ultimaker Cura Enterprise zu erhalten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-Code Extruder-Ende"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Anmelden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Druckereinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Pakete werden abgeholt..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Breite)"
+msgid "Compatibility"
+msgstr "Kompatibilität"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Tiefe)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Gerät"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Höhe)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Druckbett"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Druckbettform"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Ausgang in Mitte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualität"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Heizbares Bett"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Technisches Datenblatt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Druckraum aufgeheizt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Sicherheitsdatenblatt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-Code-Variante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Druckrichtlinien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Druckkopfeinstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Plugins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materialien"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Installiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Zum Web Marketplace gehen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Brückenhöhe"
+msgid "Will install upon restarting"
+msgstr "Installiert nach Neustart"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Anzahl Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Aktualisierung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Start G-Code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Aktualisierung wird durchgeführt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Ende G-Code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Aktualisiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Stellen Sie sicher, dass der Drucker verbunden ist:\n"
-"– Prüfen Sie, ob der Drucker eingeschaltet ist.– Prüfen Sie, ob der Drucker mit dem Netzwerk verbunden ist.\n"
-"– Prüfen Sie, ob Sie angemeldet sind, falls Sie über die Cloud verbundene Drucker suchen möchten."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href=‘%1‘>Anmeldung</a> für Update erforderlich"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgraden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Deinstallieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Installiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href=‘%1‘>Anmeldung</a> für Installation oder Update erforderlich"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href=‘%1‘>Materialspulen kaufen</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Materialien suchen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Verbinden Sie Ihren Drucker bitte mit dem Netzwerk."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Cura muss neu gestartet werden, um die Änderungen der Pakete zu übernehmen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Benutzerhandbücher online anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1 beenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Zurück"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Mesh-Typ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Normales Modell"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Als Stützstruktur drucken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Einstellungen für Überlappungen ändern"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Überlappungen nicht unterstützen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Nur Mesh-Füllung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Mesh beschneiden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Einstellungen wählen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Einstellungen für die benutzerdefinierte Anpassung dieses Modells wählen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtern..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Alle anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Plugin Nachbearbeitung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Skripts Nachbearbeitung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Ein Skript hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Einstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Aktive Nachbearbeitungsskripts ändern."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Die folgenden Skript ist aktiv:"
 msgstr[1] "Die folgenden Skripte sind aktiv:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Farbschema"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materialfarbe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Linientyp"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Geschwindigkeit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Schichtdicke"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Kompatibilitätsmodus"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Bewegungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Helfer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Gehäuse"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Füllung"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Nur obere Schichten anzeigen"
+msgid "Queued"
+msgstr "In Warteschlange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 detaillierte Schichten oben anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Im Browser verwalten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Oben/Unten"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Die Warteschlange enthält keine Druckaufträge. Slicen Sie einen Auftrag und schicken Sie ihn ab, um ihn zur Warteschlange hinzuzufügen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Innenwand"
+msgid "Print jobs"
+msgstr "Druckaufträge"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Druckdauer insgesamt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "Warten auf"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Weitere Informationen zur anonymen Datenerfassung"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Nachfolgend ist ein Beispiel aller Daten, die geteilt werden:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Ich möchte keine anonymen Daten senden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Senden von anonymen Daten erlauben"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Zurück"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Kompatibilität"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Gerät"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Druckbett"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Support"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualität"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technisches Datenblatt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Sicherheitsdatenblatt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Druckrichtlinien"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Website"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installiert"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href=‘%1‘>Anmeldung</a> für Installation oder Update erforderlich"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=‘%1‘>Materialspulen kaufen</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Aktualisierung"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aktualisierung wird durchgeführt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aktualisiert"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Zum Web Marketplace gehen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Materialien suchen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Cura muss neu gestartet werden, um die Änderungen der Pakete zu übernehmen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1 beenden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plugins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materialien"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installiert"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Installiert nach Neustart"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href=‘%1‘>Anmeldung</a> für Update erforderlich"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgraden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Deinstallieren"
+msgid "Configuration Changes"
+msgstr "Konfigurationsänderungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Änderungen in deinem Konto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Verwerfen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Weiter"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Die folgenden Pakete werden hinzugefügt:"
+msgid "Override"
+msgstr "Überschreiben"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Die folgenden Pakete können nicht hinzugefügt werden, weil die Cura-Version nicht kompatibel ist:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Deinstallieren bestätigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Sie sind dabei, Materialien und/oder Profile zu deinstallieren, die noch verwendet werden. Durch Bestätigen werden die folgenden Materialien/Profile auf ihre Standardeinstellungen zurückgesetzt."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materialien"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profile"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Bestätigen"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Der zugewiesene Drucker %1 erfordert die folgende Konfigurationsänderung:"
+msgstr[1] "Der zugewiesene Drucker %1 erfordert die folgenden Konfigurationsänderungen:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Sie müssen die Lizenz akzeptieren, um das Paket zu installieren"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Der Drucker %1 wurde zugewiesen, allerdings enthält der Auftrag eine unbekannte Materialkonfiguration."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Website"
+msgid "Change material %1 from %2 to %3."
+msgstr "Material %1 von %2 auf %3 wechseln."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-Mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "%3 als Material %1 laden (Dies kann nicht übergangen werden)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Version"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Print Core %1 von %2 auf %3 wechseln."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Zuletzt aktualisiert"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Druckplatte auf %1 wechseln (Dies kann nicht übergangen werden)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marke"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Überschreiben verwendet die definierten Einstellungen mit der vorhandenen Druckerkonfiguration. Dies kann zu einem fehlgeschlagenen Druck führen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+msgid "Glass"
+msgstr "Glas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Community-Beiträge"
+msgid "Aluminum"
+msgstr "Aluminium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Community-Plugins"
+msgid "Unavailable printer"
+msgstr "Drucker nicht verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Generische Materialien"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Verbindung zur Cura Paket-Datenbank konnte nicht hergestellt werden. Bitte überprüfen Sie Ihre Verbindung."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Installierte Plugins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Es wurde kein Plugin installiert."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Installierte Materialien"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Es wurde kein Material installiert."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Gebündelte Plugins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Gebündelte Materialien"
+msgid "First available"
+msgstr "Zuerst verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Pakete werden abgeholt..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Bitte melden Sie sich an, um verifizierte Plugins und Materialien für Ultimaker Cura Enterprise zu erhalten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marktplatz"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivellierung der Druckplatte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Um sicherzustellen, dass Ihre Drucke hervorragend werden, können Sie nun Ihre Druckplatte justieren. Wenn Sie auf „Gehe zur nächsten Position“ klicken, bewegt sich die Düse zu den verschiedenen Positionen, die justiert werden können."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Legen Sie für jede Position ein Blatt Papier unter die Düse und stellen Sie die Höhe der Druckplatte ein. Die Höhe der Druckplatte ist korrekt, wenn das Papier von der Spitze der Düse leicht berührt wird."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Nivellierung der Druckplatte starten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Gehe zur nächsten Position"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Wählen Sie bitte alle Upgrades für dieses Ultimaker-Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Beheizte Druckplatte (offizielles Kit oder Eigenbau)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Damit Sie die Warteschlange aus der Ferne verwalten können, müssen Sie die Druckfirmware aktualisieren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Anschluss an vernetzten Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Um direkt auf Ihrem Drucker über das Netzwerk zu drucken, muss der Drucker über ein Netzwerkkabel oder per WLAN mit dem Netzwerk verbunden sein. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie G-Code-Dateien auf einen USB-Stick kopieren und diesen am Drucker anschließen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Wählen Sie Ihren Drucker aus der folgenden Liste aus:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bearbeiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Entfernen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Wenn Ihr Drucker nicht aufgeführt ist, lesen Sie die <a href='%1'>Anleitung für Fehlerbehebung für Netzwerkdruck</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Typ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmware-Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Dieser Drucker ist nicht eingerichtet um eine Gruppe von Druckern anzusteuern."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Dieser Drucker steuert eine Gruppe von %1 Druckern an."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Der Drucker unter dieser Adresse hat nicht reagiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Verbinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ungültige IP-Adresse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Bitte eine gültige IP-Adresse eingeben."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Druckeradresse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Geben Sie die IP-Adresse Ihres Druckers in das Netzwerk ein."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Konfigurationsänderungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Überschreiben"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Der zugewiesene Drucker %1 erfordert die folgende Konfigurationsänderung:"
-msgstr[1] "Der zugewiesene Drucker %1 erfordert die folgenden Konfigurationsänderungen:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Der Drucker %1 wurde zugewiesen, allerdings enthält der Auftrag eine unbekannte Materialkonfiguration."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Material %1 von %2 auf %3 wechseln."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "%3 als Material %1 laden (Dies kann nicht übergangen werden)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Print Core %1 von %2 auf %3 wechseln."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Druckplatte auf %1 wechseln (Dies kann nicht übergangen werden)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Überschreiben verwendet die definierten Einstellungen mit der vorhandenen Druckerkonfiguration. Dies kann zu einem fehlgeschlagenen Druck führen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Drucken über Netzwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Glas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Drucken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminium"
+msgid "Printer selection"
+msgstr "Druckerauswahl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Vorziehen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Löschen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Zurückkehren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Wird pausiert..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Wird fortgesetzt..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Wird abgebrochen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Soll dieser %1 wirklich an den Anfang der Warteschlange vorgezogen werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Druckauftrag vorziehen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Soll %1 wirklich gelöscht werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Druckauftrag löschen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Möchten Sie %1 wirklich abbrechen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Drucken abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abgebrochen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Beendet"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Vorbereitung..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Wird abgebrochen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Wird pausiert..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pausiert"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Wird fortgesetzt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Handlung erforderlich"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Fertigstellung %1 auf %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Drucker verwalten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Damit Sie die Warteschlange aus der Ferne verwalten können, müssen Sie die Druckfirmware aktualisieren."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Lädt..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Nicht verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nicht erreichbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Leerlauf"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Drucken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Unbenannt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonym"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Erfordert Konfigurationsänderungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Details"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Drucker nicht verfügbar"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Wählen Sie bitte alle Upgrades für dieses Ultimaker-Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Zuerst verfügbar"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Beheizte Druckplatte (offizielles Kit oder Eigenbau)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abgebrochen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivellierung der Druckplatte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Beendet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Um sicherzustellen, dass Ihre Drucke hervorragend werden, können Sie nun Ihre Druckplatte justieren. Wenn Sie auf „Gehe zur nächsten Position“ klicken, bewegt sich die Düse zu den verschiedenen Positionen, die justiert werden können."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Vorbereitung..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Legen Sie für jede Position ein Blatt Papier unter die Düse und stellen Sie die Höhe der Druckplatte ein. Die Höhe der Druckplatte ist korrekt, wenn das Papier von der Spitze der Düse leicht berührt wird."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Wird abgebrochen..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Nivellierung der Druckplatte starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Wird pausiert..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Gehe zur nächsten Position"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pausiert"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Projekt öffnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Wird fortgesetzt..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Vorhandenes aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Handlung erforderlich"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Neu erstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Fertigstellung %1 auf %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Zusammenfassung – Cura-Projekt"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Druckereinstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Wie soll der Konflikt im Gerät gelöst werden?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Druckergruppe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profileinstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Wie soll der Konflikt im Profil gelöst werden?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Name"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nicht im Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 überschreiben"
+msgstr[1] "%1 überschreibt"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Ableitung von"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 überschreiben"
+msgstr[1] "%1, %2 überschreibt"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materialeinstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Wie soll der Konflikt im Material gelöst werden?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Sichtbarkeit einstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Sichtbare Einstellungen:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 von %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Das Laden eines Projekts entfernt alle Modelle von der Druckplatte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Öffnen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Einige Punkte bei diesem Druck könnten problematisch sein. Klicken Sie, um Tipps für die Anpassung zu erhalten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Stellen Sie sicher, dass der Drucker verbunden ist:\n"
+"– Prüfen Sie, ob der Drucker eingeschaltet ist.– Prüfen Sie, ob der Drucker mit dem Netzwerk verbunden ist.\n"
+"– Prüfen Sie, ob Sie angemeldet sind, falls Sie über die Cloud verbundene Drucker suchen möchten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Verbinden Sie Ihren Drucker bitte mit dem Netzwerk."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Benutzerhandbücher online anzeigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Weitere Informationen zur anonymen Datenerfassung"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Nachfolgend ist ein Beispiel aller Daten, die geteilt werden:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Ich möchte keine anonymen Daten senden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Senden von anonymen Daten erlauben"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "In Warteschlange"
+msgid "Color scheme"
+msgstr "Farbschema"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Im Browser verwalten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materialfarbe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Linientyp"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Geschwindigkeit"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Die Warteschlange enthält keine Druckaufträge. Slicen Sie einen Auftrag und schicken Sie ihn ab, um ihn zur Warteschlange hinzuzufügen."
+msgid "Compatibility Mode"
+msgstr "Kompatibilitätsmodus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Druckaufträge"
+msgid "Travels"
+msgstr "Bewegungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Druckdauer insgesamt"
+msgid "Helpers"
+msgstr "Helfer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Warten auf"
+msgid "Shell"
+msgstr "Gehäuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Drucken über Netzwerk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Füllung"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Drucken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Druckerauswahl"
+msgid "Only Show Top Layers"
+msgstr "Nur obere Schichten anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Anmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 detaillierte Schichten oben anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Ihr Schlüssel zu vernetztem 3D-Druck"
+msgid "Top / Bottom"
+msgstr "Oben/Unten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personalisieren Sie Ihre Druckerfahrung mit weiteren Druckprofilen und Plugins\n"
-"- Bleiben Sie flexibel, indem Sie Ihre Einstellungen synchronisieren und überall laden können\n"
-"- Steigern Sie Ihre Effizienz mit einem Remote-Workflow für Ultimaker-Drucker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Innenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Konto erstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Überprüfung läuft ..."
+msgid "max"
+msgstr "max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Düseneinstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Konto wurde synchronisiert"
+msgid "Nozzle size"
+msgstr "Düsengröße"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Irgendetwas ist schief gelaufen ..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Ausstehende Updates installieren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Kompatibler Materialdurchmesser"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Nach Updates für das Konto suchen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "X-Versatz Düse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Letztes Update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Y-Versatz Düse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker‑Konto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Kühllüfter-Nr."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Abmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-Code Extruder-Start"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-Code Extruder-Ende"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Drucker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Druckereinstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Keine Zeitschätzung verfügbar"
+msgid "X (Width)"
+msgstr "X (Breite)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Keine Kostenschätzung verfügbar"
+msgid "Y (Depth)"
+msgstr "Y (Tiefe)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Vorschau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Höhe)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Zeitschätzung"
+msgid "Build plate shape"
+msgstr "Druckbettform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Materialschätzung"
+msgid "Origin at center"
+msgstr "Ausgang in Mitte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Heizbares Bett"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Druckraum aufgeheizt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Das Slicing läuft..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-Code-Variante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Slicing nicht möglich"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Druckkopfeinstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Brückenhöhe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Anzahl Extruder"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Start G-Code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Ende G-Code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Bild konvertieren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Der Maximalabstand von jedem Pixel von der „Basis“."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Höhe (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Die Basishöhe von der Druckplatte in Millimetern."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Basis (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Die Breite der Druckplatte in Millimetern."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Breite (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Die Tiefe der Druckplatte in Millimetern"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Tiefe (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Für Lithophanien sollten dunkle Pixel dickeren Positionen entsprechen, um mehr einfallendes Licht zu blockieren. Für Höhenkarten stellen hellere Pixel höheres Terrain dar, sodass hellere Pixel dickeren Positionen im generierten 3D-Modell entsprechen sollten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Dunkler ist höher"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Heller ist höher"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Für Lithophanien ist ein einfaches logarithmisches Modell für Transparenz verfügbar. Bei Höhenprofilen entsprechen die Pixelwerte den Höhen linear."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Transparenz"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Der Prozentsatz an Licht, der einen Druck von einer Dicke mit 1 Millimeter durchdringt. Senkt man diesen Wert, steigt der Kontrast in den dunkleren Bereichen, während der Kontrast in den helleren Bereichen des Bilds sinkt."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 mm Durchlässigkeit (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Die Stärke der Glättung, die für das Bild angewendet wird."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Glättung"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Meine Backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Sie verfügen derzeit über keine Backups. Verwenden Sie die Schaltfläche ‚Jetzt Backup erstellen‘, um ein Backup zu erstellen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "In der Vorschau-Phase sind Sie auf 5 sichtbare Backups beschränkt. Ein Backup entfernen, um ältere anzusehen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Ihre Cura-Einstellungen sichern und synchronisieren."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Verarbeitung läuft"
+msgid "Want more?"
+msgstr "Möchten Sie mehr?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slice"
+msgid "Backup Now"
+msgstr "Jetzt Backup durchführen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Slicing-Vorgang starten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatisches Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "An jedem Tag, an dem Cura gestartet wird, ein automatisches Backup erstellen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura-Version"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Maschinen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materialien"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plugins"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Abbrechen"
+msgid "Restore"
+msgstr "Wiederherstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Online-Fehlerbehebung anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Backup löschen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Umschalten auf Vollbild-Modus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Soll dieses Backup wirklich gelöscht werden? Der Vorgang kann nicht rückgängig gemacht werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Vollbildmodus beenden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Backup wiederherstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Rückgängig machen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Cura muss neu gestartet werden, um Ihre Datensicherung wiederherzustellen. Möchten Sie Cura jetzt schließen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Wiederholen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura-Backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoriten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generisch"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Datei"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Projekt speichern ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportieren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Beenden"
+msgid "Export Selection..."
+msgstr "Auswahl exportieren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D-Ansicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "&Zuletzt geöffnet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Konfiguration wählen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Drucker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Aktiviert"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Für diese Materialkombination Kleber für eine bessere Haftung verwenden."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Diese Konfigurationen sind nicht verfügbar, weil %1 nicht erkannt wird. Besuchen Sie bitte %2 für das Herunterladen des korrekten Materialprofils."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marktplatz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Verfügbare Konfigurationen werden von diesem Drucker geladen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Die Konfigurationen sind nicht verfügbar, da der Drucker getrennt ist."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ansicht"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Vorderansicht"
+msgid "&Camera position"
+msgstr "&Kameraposition"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Draufsicht"
+msgid "Camera view"
+msgstr "Kameraansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Ansicht von links"
+msgid "Perspective"
+msgstr "Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Ansicht von rechts"
+msgid "Orthographic"
+msgstr "Orthogonal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura konfigurieren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Druckplatte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Drucker hinzufügen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Netzwerkfähige Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Dr&ucker verwalten..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokale Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Materialien werden verwaltet..."
+msgid "Visible Settings"
+msgstr "Sichtbare Einstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Weiteres Material aus Marketplace hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
+msgid "Collapse All Categories"
+msgstr "Alle Kategorien schließen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Aktuelle Änderungen verwerfen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Sichtbarkeit einstellen verwalten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "P&rofil von aktuellen Einstellungen/Überschreibungen erstellen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Einstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profile verwalten..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Dr&ucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Online-&Dokumentation anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "&Fehler melden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Als aktiven Extruder festlegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Neuheiten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder aktivieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Über..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder deaktivieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Ausgewähltes Modell löschen"
-msgstr[1] "Ausgewählte Modelle löschen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Ausgewähltes Modell zentrieren"
-msgstr[1] "Ausgewählte Modelle zentrieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Ausgewähltes Modell drucken mit:"
+msgstr[1] "Ausgewählte Modelle drucken mit:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Ausgewähltes Modell multiplizieren"
 msgstr[1] "Ausgewählte Modelle multiplizieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Modell löschen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Anzahl Kopien"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Modell auf Druckplatte ze&ntrieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Modelle &gruppieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Benutzerdefinierte Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Gruppierung für Modelle aufheben"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Aktuelle Änderungen verwerfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Modelle &zusammenführen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "Modell &multiplizieren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n"
+"\n"
+"Klicken Sie, um den Profilmanager zu öffnen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Alle Modelle wählen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Ein"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Druckplatte reinigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Aus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Alle Modelle neu laden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimentell"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Alle Modelle an allen Druckplatten anordnen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Empfohlen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Alle Modelle anordnen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Benutzerdefiniert"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Anordnung auswählen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Druckeinstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Alle Modellpositionen zurücksetzen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Druckeinrichtung ist deaktiviert. G-Code-Datei kann nicht geändert werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Alle Modelltransformationen zurücksetzen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Stufenweise Füllung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Datei(en) öffnen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Die graduelle Füllung steigert die Menge der Füllung nach oben hin schrittweise."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Neues Projekt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Konfigurationsordner anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Sie haben einige Profileinstellungen geändert. Wenn Sie diese ändern möchten, wechseln Sie in den Modus „Benutzerdefiniert“."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Sichtbarkeit einstellen wird konfiguriert..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Stützstruktur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marktplatz"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Damit werden Strukturen zur Unterstützung von Modellteilen mit Überhängen generiert. Ohne diese Strukturen würden solche Teile während des Druckvorgangs zusammenfallen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Dieses Paket wird nach einem Neustart installiert."
+msgid "Adhesion"
+msgstr "Haftung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Allgemein"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Drucken eines Brim- oder Raft-Elements aktivieren. Es wird ein flacher Bereich rund um oder unter Ihrem Objekt hinzugefügt, das im Anschluss leicht abgeschnitten werden kann."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Einstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Es gibt kein %1-Profil für die Konfiguration in der Extruder %2. Es wird stattdessen der Standard verwendet"
+msgstr[1] "Es gibt kein %1-Profil für die Konfigurationen in den Extrudern %2. Es wird stattdessen der Standard verwendet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Drucker"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktiver Druck"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 wird geschlossen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Name des Auftrags"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Möchten Sie %1 wirklich beenden?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Druckzeit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Geschätzte verbleibende Zeit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Datei(en) öffnen"
+msgid "Discard or Keep changes"
+msgstr "Änderungen verwerfen oder übernehmen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Paket installieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Sie haben einige Profileinstellungen personalisiert.\n"
+"Möchten Sie diese geänderten Einstellungen nach einem Profilwechsel beibehalten?\n"
+"Sie können die Änderungen auch verwerfen, um die Standardeinstellungen von '%1' zu laden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Datei(en) öffnen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profileinstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Es wurden eine oder mehrere G-Code-Datei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine G-Code-Datei auf einmal öffnen. Wenn Sie eine G-Code-Datei öffnen möchten wählen Sie bitte nur eine Datei."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Aktuelle Änderungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Drucker hinzufügen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Stets nachfragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Neuheiten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Verwerfen und zukünftig nicht mehr nachfragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Übernehmen und zukünftig nicht mehr nachfragen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Änderungen verwerfen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Änderungen speichern"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Über %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "Version: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Komplettlösung für den 3D-Druck mit geschmolzenem Filament."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3477,1982 +3605,2103 @@ msgstr ""
 "Cura wurde von Ultimaker B.V. in Zusammenarbeit mit der Community entwickelt.\n"
 "Cura verwendet mit Stolz die folgenden Open Source-Projekte:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafische Benutzerschnittstelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Anwendungsrahmenwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-Code-Generator"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Bibliothek Interprozess-Kommunikation"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programmiersprache"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-Rahmenwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI-Rahmenwerk Einbindungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ Einbindungsbibliothek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format Datenaustausch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Support-Bibliothek für wissenschaftliche Berechnung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Support-Bibliothek für schnelleres Rechnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Support-Bibliothek für die Handhabung von STL-Dateien"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Support-Bibliothek für die Handhabung von ebenen Objekten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Support-Bibliothek für die Handhabung von dreieckigen Netzen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Support-Bibliothek für die Handhabung von 3MF-Dateien"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Support-Bibliothek für Datei-Metadaten und Streaming"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothek für serielle Kommunikation"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothek für ZeroConf-Erkennung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothek für Polygon-Beschneidung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statischer Prüfer für Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Root-Zertifikate zur Validierung der SSL-Vertrauenswürdigkeit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python-Fehlerverfolgungs-Bibliothek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Polygon-Packaging-Bibliothek, entwickelt von Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Python-Bindungen für libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Schriftart"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-Symbole"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Distributionsunabhängiges Format für Linux-Anwendungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projektdatei öffnen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Dies ist eine Cura-Projektdatei. Möchten Sie diese als Projekt öffnen oder die Modelle hieraus importieren?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Meine Auswahl merken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Als Projekt öffnen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modelle importieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Änderungen verwerfen oder übernehmen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Sie haben einige Profileinstellungen personalisiert.\n"
-"Möchten Sie diese geänderten Einstellungen nach einem Profilwechsel beibehalten?\n"
-"Sie können die Änderungen auch verwerfen, um die Standardeinstellungen von '%1' zu laden."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profileinstellungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Aktuelle Änderungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Stets nachfragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Verwerfen und zukünftig nicht mehr nachfragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Übernehmen und zukünftig nicht mehr nachfragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Änderungen verwerfen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Änderungen speichern"
+msgid "Open file(s)"
+msgstr "Datei(en) öffnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Es wurden eine oder mehrere Projektdatei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine Projektdatei auf einmal öffnen. Es wird empfohlen, nur Modelle aus diesen Dateien zu importieren. Möchten Sie fortfahren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Alle als Modelle importieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Projekt speichern"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Projektzusammenfassung beim Speichern nicht erneut anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Speichern"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Ausgewähltes Modell drucken mit %1"
-msgstr[1] "Ausgewählte Modelle drucken mit %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projektdatei öffnen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Dies ist eine Cura-Projektdatei. Möchten Sie diese als Projekt öffnen oder die Modelle hieraus importieren?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Meine Auswahl merken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Als Projekt öffnen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modelle importieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Unbenannt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Datei"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Willkommen bei Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Bearbeiten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ansicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Erste Schritte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Einstellungen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Leer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Er&weiterungen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Helfen Sie uns, Ultimaker Cura zu verbessern"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "E&instellungen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Dazu gehören:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Hilfe"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Gerätetypen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Neues Projekt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Materialverbrauch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Möchten Sie wirklich ein neues Projekt beginnen? Damit werden das Druckbett und alle nicht gespeicherten Einstellungen gelöscht."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Anzahl der Slices"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marktplatz"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Druckeinstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurationen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Die von Ultimaker Cura erfassten Daten enthalten keine personenbezogenen Daten."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mehr Informationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Diese Konfigurationen sind nicht verfügbar, weil %1 nicht erkannt wird. Besuchen Sie bitte %2 für das Herunterladen des korrekten Materialprofils."
+msgid "Add printer by IP address"
+msgstr "Drucker nach IP-Adresse hinzufügen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Geben Sie die IP-Adresse Ihres Druckers ein."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Hinzufügen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marktplatz"
+msgid "Could not connect to device."
+msgstr "Verbindung mit Drucker nicht möglich."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Verfügbare Konfigurationen werden von diesem Drucker geladen..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Sie können keine Verbindung zu Ihrem Ultimaker-Drucker herstellen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Die Konfigurationen sind nicht verfügbar, da der Drucker getrennt ist."
+msgid "The printer at this address has not responded yet."
+msgstr "Der Drucker unter dieser Adresse hat noch nicht reagiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Konfiguration wählen"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Dieser Drucker kann nicht hinzugefügt werden, weil es sich um einen unbekannten Drucker handelt oder er nicht im Host einer Gruppe enthalten ist."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Zurück"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Verbinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurationen"
+msgid "Add a printer"
+msgstr "Einen Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Einen vernetzten Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Drucker"
+msgid "Add a non-networked printer"
+msgstr "Einen unvernetzten Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Aktiviert"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Add a Cloud printer"
+msgstr "Einen Cloud-Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Für diese Materialkombination Kleber für eine bessere Haftung verwenden."
+msgid "Waiting for Cloud response"
+msgstr "Auf eine Antwort von der Cloud warten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Ausgewähltes Modell drucken mit:"
-msgstr[1] "Ausgewählte Modelle drucken mit:"
+msgid "No printers found in your account?"
+msgstr "Keine Drucker in Ihrem Konto gefunden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Ausgewähltes Modell multiplizieren"
-msgstr[1] "Ausgewählte Modelle multiplizieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Folgende Drucker in Ihrem Konto wurden zu Cura hinzugefügt:"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Drucker manuell hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Anzahl Kopien"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Projekt speichern ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportieren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Auswahl exportieren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoriten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Überspringen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generisch"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Benutzervereinbarung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Netzwerkfähige Drucker"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Ablehnen und schließen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokale Drucker"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "&Zuletzt geöffnet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Kein Drucker in Ihrem Netzwerk gefunden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Dr&ucker"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Drucker nach IP hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Als aktiven Extruder festlegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Ein Cloud-Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder aktivieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Störungen beheben"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder deaktivieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Hersteller"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor des Profils"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Druckername"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Letztes Update: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker‑Konto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Abmelden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Anmelden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Überprüfung läuft ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Konto wurde synchronisiert"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Irgendetwas ist schief gelaufen ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Ausstehende Updates installieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Nach Updates für das Konto suchen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Objektliste"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Sichtbare Einstellungen"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Online-Fehlerbehebung anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Alle Kategorien schließen"
+msgid "Toggle Full Screen"
+msgstr "Umschalten auf Vollbild-Modus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Sichtbarkeit einstellen verwalten..."
+msgid "Exit Full Screen"
+msgstr "Vollbildmodus beenden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Rückgängig machen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Wiederholen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Beenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kameraposition"
+msgid "3D View"
+msgstr "3D-Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kameraansicht"
+msgid "Front View"
+msgstr "Vorderansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Ansicht"
+msgid "Top View"
+msgstr "Draufsicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthogonal"
+msgid "Left Side View"
+msgstr "Ansicht von links"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Druckplatte"
+msgid "Right Side View"
+msgstr "Ansicht von rechts"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nicht mit einem Drucker verbunden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura konfigurieren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Drucker nimmt keine Befehle an"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Drucker hinzufügen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "In Wartung. Den Drucker überprüfen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Dr&ucker verwalten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Verbindung zum Drucker wurde unterbrochen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Materialien werden verwaltet..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Es wird gedruckt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Weiteres Material aus Marketplace hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Pausiert"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Vorbereitung läuft..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Aktuelle Änderungen verwerfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Bitte den Ausdruck entfernen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "P&rofil von aktuellen Einstellungen/Überschreibungen erstellen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profile verwalten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Online-&Dokumentation anzeigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "&Fehler melden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Neuheiten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Über..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Modell löschen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Modell auf Druckplatte ze&ntrieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Modelle &gruppieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Gruppierung für Modelle aufheben"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Modelle &zusammenführen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "Modell &multiplizieren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Alle Modelle wählen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Druckplatte reinigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Alle Modelle neu laden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Alle Modelle an allen Druckplatten anordnen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Alle Modelle anordnen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Anordnung auswählen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Alle Modellpositionen zurücksetzen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Alle Modelltransformationen zurücksetzen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Datei(en) öffnen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Neues Projekt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Konfigurationsordner anzeigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Sichtbarkeit einstellen wird konfiguriert..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marktplatz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Berechnet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Einstellung"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktuell"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Einheit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Änderung Durchmesser bestätigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Der neue Filament-Durchmesser wurde auf %1 mm eingestellt, was nicht kompatibel mit dem aktuellen Extruder ist. Möchten Sie fortfahren?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Drucken abbrechen"
+msgid "Display Name"
+msgstr "Namen anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Soll das Drucken wirklich abgebrochen werden?"
+msgid "Material Type"
+msgstr "Materialtyp"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Wird als Stückstruktur gedruckt."
+msgid "Color"
+msgstr "Farbe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Andere Modelle, die sich mit diesem Modell überschneiden, werden angepasst."
+msgid "Properties"
+msgstr "Eigenschaften"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Überlappende Füllung wird bei diesem Modell angepasst."
+msgid "Density"
+msgstr "Dichte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Überlappungen mit diesem Modell werden nicht unterstützt."
+msgid "Diameter"
+msgstr "Durchmesser"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Überschreibt %1-Einstellung."
-msgstr[1] "Überschreibt %1-Einstellungen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Filamentkosten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Objektliste"
+msgid "Filament weight"
+msgstr "Filamentgewicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Filamentlänge"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Kosten pro Meter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Dieses Material ist mit %1 verknüpft und teilt sich damit einige seiner Eigenschaften."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Material trennen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Beschreibung"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Haftungsinformationen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Erstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplizieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Import"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Drucker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Entfernen bestätigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Möchten Sie %1 wirklich entfernen? Dies kann nicht rückgängig gemacht werden!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Material importieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Material konnte nicht importiert werden <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material wurde erfolgreich importiert <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Material exportieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Exportieren des Materials nach <filename>%1</filename>: <message>%2</message> schlug fehl"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material erfolgreich nach <filename>%1</filename> exportiert"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Drucker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Umbenennen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Erstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplizieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil erstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Geben Sie bitte einen Namen für dieses Profil an."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profil duplizieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profil umbenennen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profil importieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profil exportieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Drucker: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Dieses Profil verwendet die vom Drucker festgelegten Standardeinstellungen, deshalb sind in der folgenden Liste keine Einstellungen/Überschreibungen enthalten."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Ihre aktuellen Einstellungen stimmen mit dem gewählten Profil überein."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Globale Einstellungen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Sichtbarkeit einstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Alle prüfen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Allgemein"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Schnittstelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Währung:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Die Anwendung muss neu gestartet werden, um die Änderungen zu übernehmen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Bei Änderung der Einstellungen automatisch schneiden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatisch schneiden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Viewport-Verhalten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Nicht gestützte Bereiche des Modells in rot hervorheben. Ohne Support werden diese Bereiche nicht korrekt gedruckt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Überhang anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Heben Sie fehlende oder fehlerhafte Flächen des Modells mithilfe von Warnhinweisen hervor. In den Werkzeugpfaden fehlen oft Teile der beabsichtigten Geometrie."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Modellfehler anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Bewegt die Kamera, bis sich das Modell im Mittelpunkt der Ansicht befindet, wenn ein Modell ausgewählt wurde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Zentrieren Sie die Kamera, wenn das Element ausgewählt wurde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Soll das standardmäßige Zoom-Verhalten von Cura umgekehrt werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Kehren Sie die Richtung des Kamera-Zooms um."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Soll das Zoomen in Richtung der Maus erfolgen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Das Zoomen in Richtung der Maus wird in der orthografischen Perspektive nicht unterstützt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "In Mausrichtung zoomen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Sollen Modelle auf der Plattform so verschoben werden, dass sie sich nicht länger überschneiden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Stellen Sie sicher, dass die Modelle getrennt gehalten werden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Sollen Modelle auf der Plattform so nach unten verschoben werden, dass sie die Druckplatte  berühren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Setzt Modelle automatisch auf der Druckplatte ab"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Warnmeldung im G-Code-Reader anzeigen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Warnmeldung in G-Code-Reader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Soll die Schicht in den Kompatibilitätsmodus gezwungen werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Schichtenansicht Kompatibilitätsmodus erzwingen (Neustart erforderlich)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Sollte Cura sich an der Stelle öffnen, an der das Programm geschlossen wurde?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Fensterposition beim Start wiederherstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Welches Kamera-Rendering sollte verwendet werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Kamera-Rendering:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthogonal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Dateien öffnen und speichern"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Sollten Dateien vom Desktop oder von externen Anwendungen in derselben Instanz von Cura geöffnet werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Eine einzelne Instanz von Cura verwenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Sollen Modelle an das Erstellungsvolumen angepasst werden, wenn sie zu groß sind?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Große Modelle anpassen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Ein Modell kann extrem klein erscheinen, wenn seine Maßeinheit z. B. in Metern anstelle von Millimetern angegeben ist. Sollen diese Modelle hoch skaliert werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extrem kleine Modelle skalieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Sollten Modelle gewählt werden, nachdem sie geladen wurden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modelle wählen, nachdem sie geladen wurden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Soll ein Präfix anhand des Druckernamens automatisch zum Namen des Druckauftrags hinzugefügt werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Geräte-Präfix zu Auftragsnamen hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Soll beim Speichern einer Projektdatei eine Zusammenfassung angezeigt werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Dialog Zusammenfassung beim Speichern eines Projekts anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Standardverhalten beim Öffnen einer Projektdatei"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Standardverhalten beim Öffnen einer Projektdatei: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Stets nachfragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Immer als Projekt öffnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Modelle immer importieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wenn Sie Änderungen für ein Profil vorgenommen haben und zu einem anderen Profil gewechselt sind, wird ein Dialog angezeigt, der hinterfragt, ob Sie Ihre Änderungen beibehalten möchten oder nicht; optional können Sie ein Standardverhalten wählen, sodass dieser Dialog nicht erneut angezeigt wird."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profile"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Standardverhalten für geänderte Einstellungswerte beim Wechsel zu einem anderen Profil: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Geänderte Einstellungen immer verwerfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Geänderte Einstellungen immer auf neues Profil übertragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privatsphäre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Soll Cura bei Programmstart nach Updates suchen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Bei Start nach Updates suchen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Sollen anonyme Daten über Ihren Druck an Ultimaker gesendet werden? Beachten Sie, dass keine Modelle, IP-Adressen oder andere personenbezogene Daten gesendet oder gespeichert werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonyme) Druckinformationen senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Mehr Informationen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Umbenennen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Erstellen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplizieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Import"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Drucker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Entfernen bestätigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Möchten Sie %1 wirklich entfernen? Dies kann nicht rückgängig gemacht werden!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Material importieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Material konnte nicht importiert werden <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material wurde erfolgreich importiert <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nicht mit einem Drucker verbunden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Material exportieren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Drucker nimmt keine Befehle an"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Exportieren des Materials nach <filename>%1</filename>: <message>%2</message> schlug fehl"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "In Wartung. Den Drucker überprüfen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material erfolgreich nach <filename>%1</filename> exportiert"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Verbindung zum Drucker wurde unterbrochen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informationen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Es wird gedruckt..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Änderung Durchmesser bestätigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Pausiert"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Der neue Filament-Durchmesser wurde auf %1 mm eingestellt, was nicht kompatibel mit dem aktuellen Extruder ist. Möchten Sie fortfahren?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Vorbereitung läuft..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Namen anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Bitte den Ausdruck entfernen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Materialtyp"
+msgid "Abort Print"
+msgstr "Drucken abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Farbe"
+msgid "Are you sure you want to abort the print?"
+msgstr "Soll das Drucken wirklich abgebrochen werden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Eigenschaften"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Einstellungen durchsuchen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Dichte"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Werte für alle Extruder kopieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Durchmesser"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Alle geänderten Werte für alle Extruder kopieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Filamentkosten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Diese Einstellung ausblenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Filamentgewicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Diese Einstellung ausblenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Filamentlänge"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Diese Einstellung weiterhin anzeigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Kosten pro Meter"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n"
+"\n"
+"Klicken Sie, um diese Einstellungen sichtbar zu machen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Dieses Material ist mit %1 verknüpft und teilt sich damit einige seiner Eigenschaften."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Diese Einstellung wird nicht verwendet, weil alle hierdurch beeinflussten Einstellungen aufgehoben werden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Material trennen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Hat Einfluss auf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Beschreibung"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Wird beeinflusst von"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Haftungsinformationen"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Diese Einstellung wird stets zwischen allen Extrudern geteilt. Eine Änderung ändert den Wert für alle Extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Druckeinstellungen"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Diese Einstellung wird durch gegensätzliche, extruderspezifische Werte gelöst:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Erstellen"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Diese Einstellung hat einen vom Profil abweichenden Wert.\n"
+"\n"
+"Klicken Sie, um den Wert des Profils wiederherzustellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplizieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil erstellen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Geben Sie bitte einen Namen für dieses Profil an."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profil duplizieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profil umbenennen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profil importieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profil exportieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Drucker: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Profil mit aktuellen Einstellungen/Überschreibungen aktualisieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Aktuelle Änderungen verwerfen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Dieses Profil verwendet die vom Drucker festgelegten Standardeinstellungen, deshalb sind in der folgenden Liste keine Einstellungen/Überschreibungen enthalten."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Ihre aktuellen Einstellungen stimmen mit dem gewählten Profil überein."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Globale Einstellungen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Berechnet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Einstellung"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n"
+"\n"
+"Klicken Sie, um den berechneten Wert wiederherzustellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D-Ansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktuell"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vorderansicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Einheit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Draufsicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Sichtbarkeit einstellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Ansicht von links"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Alle prüfen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Ansicht von rechts"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Die Zieltemperatur des Hotend. Das Hotend wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Hotend-Heizung ausgeschaltet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Die aktuelle Temperatur dieses Hotends."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Die Temperatur, auf die das Hotend vorgeheizt wird."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Vorheizen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Heizen Sie das Hotend vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Hotend aufgeheizt ist, wenn Sie druckbereit sind."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Die Farbe des Materials in diesem Extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Das Material in diesem Extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Die in diesem Extruder eingesetzte Düse."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Druckbett"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Die Zieltemperatur des heizbaren Betts. Das Bett wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Bettheizung ausgeschaltet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Die aktuelle Temperatur des beheizten Betts."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Die Temperatur, auf die das Bett vorgeheizt wird."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Heizen Sie das Bett vor Druckbeginn auf. Sie können Ihren Druck während des Aufheizens weiter anpassen und müssen nicht warten, bis das Bett aufgeheizt ist, wenn Sie druckbereit sind."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Druckersteuerung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Tippposition"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Tippdistanz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-Code senden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Einen benutzerdefinierten G-Code-Befehl an den verbundenen Drucker senden. „Eingabe“ drücken, um den Befehl zu senden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Der Drucker ist nicht verbunden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Der Cloud-Drucker ist offline. Bitte prüfen Sie, ob der Drucker eingeschaltet und mit dem Internet verbunden ist."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Der Drucker ist nicht mit Ihrem Konto verbunden. Bitte besuchen Sie die Ultimaker Digital Factory, um eine Verbindung herzustellen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte melden Sie sich an, um sich mit dem Cloud-Drucker zu verbinden."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte überprüfen Sie ihre Internetverbindung."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Drucker hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Drucker verwalten"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Verbundene Drucker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Voreingestellte Drucker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktiver Druck"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Name des Auftrags"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Druckzeit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Geschätzte verbleibende Zeit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n"
-"\n"
-"Klicken Sie, um den Profilmanager zu öffnen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Benutzerdefinierte Profile"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Es gibt kein %1-Profil für die Konfiguration in der Extruder %2. Es wird stattdessen der Standard verwendet"
-msgstr[1] "Es gibt kein %1-Profil für die Konfigurationen in den Extrudern %2. Es wird stattdessen der Standard verwendet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Druckeinrichtung ist deaktiviert. G-Code-Datei kann nicht geändert werden."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Empfohlen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Ein"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Aus"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimentell"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Haftung"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Drucken eines Brim- oder Raft-Elements aktivieren. Es wird ein flacher Bereich rund um oder unter Ihrem Objekt hinzugefügt, das im Anschluss leicht abgeschnitten werden kann."
+msgid "Is printed as support."
+msgstr "Wird als Stückstruktur gedruckt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Stufenweise Füllung"
+msgid "Other models overlapping with this model are modified."
+msgstr "Andere Modelle, die sich mit diesem Modell überschneiden, werden angepasst."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Die graduelle Füllung steigert die Menge der Füllung nach oben hin schrittweise."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Sie haben einige Profileinstellungen geändert. Wenn Sie diese ändern möchten, wechseln Sie in den Modus „Benutzerdefiniert“."
+msgid "Infill overlapping with this model is modified."
+msgstr "Überlappende Füllung wird bei diesem Modell angepasst."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Stützstruktur"
+msgid "Overlaps with this model are not supported."
+msgstr "Überlappungen mit diesem Modell werden nicht unterstützt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Damit werden Strukturen zur Unterstützung von Modellteilen mit Überhängen generiert. Ohne diese Strukturen würden solche Teile während des Druckvorgangs zusammenfallen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Überschreibt %1-Einstellung."
+msgstr[1] "Überschreibt %1-Einstellungen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n"
-"\n"
-"Klicken Sie, um diese Einstellungen sichtbar zu machen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marktplatz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Diese Einstellung wird nicht verwendet, weil alle hierdurch beeinflussten Einstellungen aufgehoben werden."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Bearbeiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Hat Einfluss auf"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Er&weiterungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Wird beeinflusst von"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "E&instellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Diese Einstellung wird stets zwischen allen Extrudern geteilt. Eine Änderung ändert den Wert für alle Extruder."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Hilfe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Diese Einstellung wird durch gegensätzliche, extruderspezifische Werte gelöst:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Neues Projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Diese Einstellung hat einen vom Profil abweichenden Wert.\n"
-"\n"
-"Klicken Sie, um den Wert des Profils wiederherzustellen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Möchten Sie wirklich ein neues Projekt beginnen? Damit werden das Druckbett und alle nicht gespeicherten Einstellungen gelöscht."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n"
-"\n"
-"Klicken Sie, um den berechneten Wert wiederherzustellen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Einstellungen durchsuchen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Werte für alle Extruder kopieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Alle geänderten Werte für alle Extruder kopieren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Diese Einstellung ausblenden"
+msgid "This package will be installed after restarting."
+msgstr "Dieses Paket wird nach einem Neustart installiert."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Diese Einstellung ausblenden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Einstellungen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Diese Einstellung weiterhin anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 wird geschlossen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D-Ansicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Möchten Sie %1 wirklich beenden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vorderansicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Paket installieren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Draufsicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Datei(en) öffnen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Ansicht von links"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Es wurden eine oder mehrere G-Code-Datei(en) innerhalb der von Ihnen gewählten Dateien gefunden. Sie können nur eine G-Code-Datei auf einmal öffnen. Wenn Sie eine G-Code-Datei öffnen möchten wählen Sie bitte nur eine Datei."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Ansicht von rechts"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ anzeigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Neuheiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Einen Cloud-Drucker hinzufügen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Der Cloud-Drucker ist offline. Bitte prüfen Sie, ob der Drucker eingeschaltet und mit dem Internet verbunden ist."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Auf eine Antwort von der Cloud warten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Der Drucker ist nicht mit Ihrem Konto verbunden. Bitte besuchen Sie die Ultimaker Digital Factory, um eine Verbindung herzustellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Keine Drucker in Ihrem Konto gefunden?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte melden Sie sich an, um sich mit dem Cloud-Drucker zu verbinden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Folgende Drucker in Ihrem Konto wurden zu Cura hinzugefügt:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Die Cloud-Verbindung ist aktuell nicht verfügbar. Bitte überprüfen Sie ihre Internetverbindung."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Drucker manuell hinzufügen"
+msgid "Add printer"
+msgstr "Drucker hinzufügen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Beenden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Hersteller"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor des Profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Druckername"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Bitte weisen Sie Ihrem Drucker einen Namen zu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Einen Drucker hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Einen vernetzten Drucker hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Einen unvernetzten Drucker hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Kein Drucker in Ihrem Netzwerk gefunden."
+msgid "Manage printers"
+msgstr "Drucker verwalten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Aktualisieren"
+msgid "Connected printers"
+msgstr "Verbundene Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Drucker nach IP hinzufügen"
+msgid "Preset printers"
+msgstr "Voreingestellte Drucker"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Ein Cloud-Drucker hinzufügen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Ausgewähltes Modell drucken mit %1"
+msgstr[1] "Ausgewählte Modelle drucken mit %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Störungen beheben"
+msgid "Time estimation"
+msgstr "Zeitschätzung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Drucker nach IP-Adresse hinzufügen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Geben Sie die IP-Adresse Ihres Druckers ein."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Hinzufügen"
+msgid "Material estimation"
+msgstr "Materialschätzung"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Verbindung mit Drucker nicht möglich."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Sie können keine Verbindung zu Ihrem Ultimaker-Drucker herstellen?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Der Drucker unter dieser Adresse hat noch nicht reagiert."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Das Slicing läuft..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Dieser Drucker kann nicht hinzugefügt werden, weil es sich um einen unbekannten Drucker handelt oder er nicht im Host einer Gruppe enthalten ist."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Slicing nicht möglich"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Zurück"
+msgid "Processing"
+msgstr "Verarbeitung läuft"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Verbinden"
+msgid "Slice"
+msgstr "Slice"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker‑Konto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Ihr Schlüssel zu vernetztem 3D-Druck"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personalisieren Sie Ihre Druckerfahrung mit weiteren Druckprofile und Plugins"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Bleiben Sie flexibel, indem Sie Ihre Einstellungen synchronisieren und überall laden können"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Steigern Sie Ihre Effizienz mit einem Remote-Workflow für Ultimaker-Drucker"
+msgid "Start the slicing process"
+msgstr "Slicing-Vorgang starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Überspringen"
+msgid "Cancel"
+msgstr "Abbrechen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Helfen Sie uns, Ultimaker Cura zu verbessern"
+msgid "No time estimation available"
+msgstr "Keine Zeitschätzung verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura erfasst anonyme Daten, um die Druckqualität und Benutzererfahrung zu steigern. Dazu gehören:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Keine Kostenschätzung verfügbar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Gerätetypen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Vorschau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Materialverbrauch"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Ermöglicht Hotplugging des Wechseldatenträgers und Beschreiben."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Anzahl der Slices"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Ausgabegerät-Plugin für Wechseldatenträger"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Druckeinstellungen"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aktualisiert Konfigurationen von Cura 3.5 auf Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Die von Ultimaker Cura erfassten Daten enthalten keine personenbezogenen Daten."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Upgrade von Version 3.5 auf 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mehr Informationen"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aktualisiert Konfigurationen von Cura 4.6.2 auf Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Leer"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Upgrade von Version 4.6.2 auf 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Benutzervereinbarung"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aktualisiert Konfigurationen von Cura 2.2 auf Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Ablehnen und schließen"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Upgrade von Version 2.2 auf 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Willkommen bei Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aktualisiert Konfigurationen von Cura 4.2 auf Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Befolgen Sie bitte diese Schritte für das Einrichten von\n"
-"Ultimaker Cura. Dies dauert nur wenige Sekunden."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Upgrade von Version 4.2 auf 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Erste Schritte"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Upgrade der Konfigurationen von Cura 4.6.0 auf Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Neuheiten bei Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Upgrade von Version 4.6.0 auf 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Überprüft Modelle und Druckkonfiguration auf mögliche Probleme und erteilt Empfehlungen."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aktualisiert Konfigurationen von Cura 3.0 auf Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modell-Prüfer"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Upgrade von Version 3.0 auf 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Ermöglicht das Lesen von 3MF-Dateien."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aktualisiert Konfigurationen von Cura 4.0 auf Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-Reader"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Upgrade von Version 4.0 auf 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Bietet Unterstützung für das Schreiben von 3MF-Dateien."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aktualisiert Konfigurationen von Cura 2.6 auf Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-Writer"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Upgrade von Version 2.6 auf 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Ermöglicht das Lesen von AMF-Dateien."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aktualisiert Konfigurationen von Cura 2.5 auf Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF-Reader"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Upgrade von Version 2.5 auf 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Sicherung und Wiederherstellen Ihrer Konfiguration."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aktualisiert Konfigurationen von Cura 4.1 auf Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura-Backups"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Upgrade von Version 4.1 auf 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Stellt die Verbindung zum Slicing-Backend der CuraEngine her."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aktualisiert Konfigurationen von Cura 2.1 auf Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Upgrade von Version 2.1 auf 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Ermöglicht das Importieren von Cura-Profilen."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aktualisiert Konfigurationen von Cura 3.2 auf Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-Profil-Reader"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Upgrade von Version 3.2 auf 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Ermöglicht das Exportieren von Cura-Profilen."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Upgrade der Konfigurationen von Cura 4.5 auf Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-Profil-Writer"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Upgrade von Version 4.5 auf 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Nach Firmware-Updates suchen."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Upgrade der Konfigurationen von Cura 4.4 auf Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Firmware-Update-Prüfer"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Upgrade von Version 4.4 auf 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Ermöglicht Gerätemaßnahmen für die Aktualisierung der Firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Upgrade der Konfigurationen von Cura 4.7 auf Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware-Aktualisierungsfunktion"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Upgrade von Version 4.7 auf 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Liest G-Code-Format aus einem komprimierten Archiv."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aktualisiert Konfigurationen von Cura 3.3 auf Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Reader für komprimierten G-Code"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Upgrade von Version 3.3 auf 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-Code wird in ein komprimiertes Archiv geschrieben."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aktualisiert Konfigurationen von Cura 4.3 auf Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Writer für komprimierten G-Code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Upgrade von Version 4.3 auf 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Ermöglicht das Importieren von Profilen aus G-Code-Dateien."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aktualisiert Konfigurationen von Cura 3.4 auf Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-Code-Profil-Reader"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Upgrade von Version 3.4 auf 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Ermöglicht das Laden und Anzeigen von G-Code-Dateien."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aktualisiert Konfigurationen von Cura 2.7 auf Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-Code-Reader"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Upgrade von Version 2.7 auf 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Schreibt G-Code in eine Datei."
+msgid "Provides support for reading AMF files."
+msgstr "Ermöglicht das Lesen von AMF-Dateien."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-Code-Writer"
+msgid "AMF Reader"
+msgstr "AMF-Reader"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Ermöglicht Erstellung von druckbarer Geometrie aus einer 2D-Bilddatei."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Ermöglicht das Importieren von Profilen aus G-Code-Dateien."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Bild-Reader"
+msgid "G-code Profile Reader"
+msgstr "G-Code-Profil-Reader"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Bietet Unterstützung für den Import von Profilen der Vorgängerversionen von Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Ermöglicht Gerätemaßnahmen für die Aktualisierung der Firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Cura-Vorgängerprofil-Reader"
+msgid "Firmware Updater"
+msgstr "Firmware-Aktualisierungsfunktion"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Beschreibt die Durchführung der Geräteeinstellung (z. B. Druckabmessung, Düsengröße usw.)"
+msgid "Provides support for reading X3D files."
+msgstr "Bietet Unterstützung für das Lesen von X3D-Dateien."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Beschreibung Geräteeinstellungen"
+msgid "X3D Reader"
+msgstr "X3D-Reader"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Bietet eine Überwachungsstufe in Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Neue Cura Pakete finden, verwalten und installieren."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Überwachungsstufe"
+msgid "Toolbox"
+msgstr "Toolbox"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5474,75 +5723,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Nachbearbeitung"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Bietet eine Vorbereitungsstufe in Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Stellt die Verbindung zum Slicing-Backend der CuraEngine her."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Vorbereitungsstufe"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Bietet eine Vorschaustufe in Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Akzeptiert den G-Code und sendet diesen an einen Drucker. Das Plugin kann auch die Firmware aktualisieren."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Vorschaustufe"
+msgid "USB printing"
+msgstr "USB-Drucken"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Ermöglicht Hotplugging des Wechseldatenträgers und Beschreiben."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Ermöglicht das Exportieren von Cura-Profilen."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Ausgabegerät-Plugin für Wechseldatenträger"
+msgid "Cura Profile Writer"
+msgstr "Cura-Profil-Writer"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Protokolliert bestimmte Ereignisse, damit diese vom Absturzbericht verwendet werden können"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Verwaltet Netzwerkverbindungen zu Ultimaker-Netzwerkdruckern."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry-Protokolleinrichtung"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker-Netzwerkverbindung"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Ermöglicht die Simulationsansicht."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ermöglicht Maschinenabläufe für Ultimaker-Maschinen (z. B. Assistent für Bettnivellierung, Auswahl von Upgrades usw.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simulationsansicht"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker-Maschinenabläufe"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Sendet anonymisierte Slice-Informationen. Kann in den Einstellungen deaktiviert werden."
+msgid "Provides support for reading 3MF files."
+msgstr "Ermöglicht das Lesen von 3MF-Dateien."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Slice-Informationen"
+msgid "3MF Reader"
+msgstr "3MF-Reader"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Bietet eine normale, solide Netzansicht."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-Code wird in ein komprimiertes Archiv geschrieben."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Solide Ansicht"
+msgid "Compressed G-code Writer"
+msgstr "Writer für komprimierten G-Code"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Liest G-Code-Format aus einem komprimierten Archiv."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Reader für komprimierten G-Code"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Überprüft Modelle und Druckkonfiguration auf mögliche Probleme und erteilt Empfehlungen."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Modell-Prüfer"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Nach Firmware-Updates suchen."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Firmware-Update-Prüfer"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Ermöglicht das Laden und Anzeigen von G-Code-Dateien."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-Code-Reader"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5554,16 +5843,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Stützstruktur-Radierer"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Neue Cura Pakete finden, verwalten und installieren."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Toolbox"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5574,6 +5853,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh Reader"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Protokolliert bestimmte Ereignisse, damit diese vom Absturzbericht verwendet werden können"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentry-Protokolleinrichtung"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5584,265 +5873,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP-Reader"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Bietet Unterstützung für das Schreiben von Ultimaker Format Packages."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP-Writer"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ermöglicht Maschinenabläufe für Ultimaker-Maschinen (z. B. Assistent für Bettnivellierung, Auswahl von Upgrades usw.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Bietet Unterstützung für den Import von Profilen der Vorgängerversionen von Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker-Maschinenabläufe"
+msgid "Legacy Cura Profile Reader"
+msgstr "Cura-Vorgängerprofil-Reader"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Verwaltet Netzwerkverbindungen zu Ultimaker-Netzwerkdruckern."
+msgid "Provides a prepare stage in Cura."
+msgstr "Bietet eine Vorbereitungsstufe in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker-Netzwerkverbindung"
+msgid "Prepare Stage"
+msgstr "Vorbereitungsstufe"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Akzeptiert den G-Code und sendet diesen an einen Drucker. Das Plugin kann auch die Firmware aktualisieren."
+msgid "Provides a monitor stage in Cura."
+msgstr "Bietet eine Überwachungsstufe in Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-Drucken"
+msgid "Monitor Stage"
+msgstr "Überwachungsstufe"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aktualisiert Konfigurationen von Cura 2.1 auf Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Stellt die Röntgen-Ansicht bereit."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Upgrade von Version 2.1 auf 2.2"
+msgid "X-Ray View"
+msgstr "Röntgen-Ansicht"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aktualisiert Konfigurationen von Cura 2.2 auf Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Bietet Unterstützung für das Schreiben von 3MF-Dateien."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Upgrade von Version 2.2 auf 2.4"
+msgid "3MF Writer"
+msgstr "3MF-Writer"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aktualisiert Konfigurationen von Cura 2.5 auf Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Sendet anonymisierte Slice-Informationen. Kann in den Einstellungen deaktiviert werden."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Upgrade von Version 2.5 auf 2.6"
+msgid "Slice info"
+msgstr "Slice-Informationen"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aktualisiert Konfigurationen von Cura 2.6 auf Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Bietet eine Vorschaustufe in Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Upgrade von Version 2.6 auf 2.7"
+msgid "Preview Stage"
+msgstr "Vorschaustufe"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aktualisiert Konfigurationen von Cura 2.7 auf Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Ermöglicht die Simulationsansicht."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Upgrade von Version 2.7 auf 3.0"
+msgid "Simulation View"
+msgstr "Simulationsansicht"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aktualisiert Konfigurationen von Cura 3.0 auf Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Beschreibt die Durchführung der Geräteeinstellung (z. B. Druckabmessung, Düsengröße usw.)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Upgrade von Version 3.0 auf 3.1"
+msgid "Machine Settings Action"
+msgstr "Beschreibung Geräteeinstellungen"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aktualisiert Konfigurationen von Cura 3.2 auf Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Bietet Möglichkeiten, um XML-basierte Materialprofile zu lesen und zu schreiben."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Upgrade von Version 3.2 auf 3.3"
+msgid "Material Profiles"
+msgstr "Materialprofile"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aktualisiert Konfigurationen von Cura 3.3 auf Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Bietet eine normale, solide Netzansicht."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Upgrade von Version 3.3 auf 3.4"
+msgid "Solid View"
+msgstr "Solide Ansicht"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aktualisiert Konfigurationen von Cura 3.4 auf Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Ermöglicht das Importieren von Cura-Profilen."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Upgrade von Version 3.4 auf 3.5"
+msgid "Cura Profile Reader"
+msgstr "Cura-Profil-Reader"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aktualisiert Konfigurationen von Cura 3.5 auf Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Bietet Unterstützung für das Schreiben von Ultimaker Format Packages."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Upgrade von Version 3.5 auf 4.0"
+msgid "UFP Writer"
+msgstr "UFP-Writer"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aktualisiert Konfigurationen von Cura 4.0 auf Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Schreibt G-Code in eine Datei."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Upgrade von Version 4.0 auf 4.1"
+msgid "G-code Writer"
+msgstr "G-Code-Writer"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aktualisiert Konfigurationen von Cura 4.1 auf Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Ermöglicht Erstellung von druckbarer Geometrie aus einer 2D-Bilddatei."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Upgrade von Version 4.1 auf 4.2"
+msgid "Image Reader"
+msgstr "Bild-Reader"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aktualisiert Konfigurationen von Cura 4.2 auf Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Sicherung und Wiederherstellen Ihrer Konfiguration."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Upgrade von Version 4.2 auf 4.3"
+msgid "Cura Backups"
+msgstr "Cura-Backups"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aktualisiert Konfigurationen von Cura 4.3 auf Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Globaler Stack fehlt."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Upgrade von Version 4.3 auf 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Ihrem Modell fehlen Schichten. Die fehlenden oder fehlerhaften Bereiche sind hervorgehoben."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Upgrade der Konfigurationen von Cura 4.4 auf Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Modellfehler"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Upgrade von Version 4.4 auf 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Schichtdicke"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Upgrade der Konfigurationen von Cura 4.5 auf Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Ihr Schlüssel zu vernetztem 3D-Druck"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Upgrade von Version 4.5 auf 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personalisieren Sie Ihre Druckerfahrung mit weiteren Druckprofilen und Plugins\n"
+#~ "- Bleiben Sie flexibel, indem Sie Ihre Einstellungen synchronisieren und überall laden können\n"
+#~ "- Steigern Sie Ihre Effizienz mit einem Remote-Workflow für Ultimaker-Drucker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Upgrade der Konfigurationen von Cura 4.6.0 auf Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Konto erstellen"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Upgrade von Version 4.6.0 auf 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Ausgewähltes Modell löschen"
+#~ msgstr[1] "Ausgewählte Modelle löschen"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aktualisiert Konfigurationen von Cura 4.6.2 auf Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Ausgewähltes Modell zentrieren"
+#~ msgstr[1] "Ausgewählte Modelle zentrieren"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Upgrade von Version 4.6.2 auf 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Ausgewähltes Modell multiplizieren"
+#~ msgstr[1] "Ausgewählte Modelle multiplizieren"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Upgrade der Konfigurationen von Cura 4.7 auf Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Beenden"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Upgrade von Version 4.7 auf 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker‑Konto"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Bietet Unterstützung für das Lesen von X3D-Dateien."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Ihr Schlüssel zu vernetztem 3D-Druck"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-Reader"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personalisieren Sie Ihre Druckerfahrung mit weiteren Druckprofile und Plugins"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Bietet Möglichkeiten, um XML-basierte Materialprofile zu lesen und zu schreiben."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Bleiben Sie flexibel, indem Sie Ihre Einstellungen synchronisieren und überall laden können"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materialprofile"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Steigern Sie Ihre Effizienz mit einem Remote-Workflow für Ultimaker-Drucker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Stellt die Röntgen-Ansicht bereit."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Befolgen Sie bitte diese Schritte für das Einrichten von\n"
+#~ "Ultimaker Cura. Dies dauert nur wenige Sekunden."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen-Ansicht"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Neuheiten bei Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
@@ -6593,8 +6870,7 @@ msgstr "Röntgen-Ansicht"
 #~ "\n"
 #~ "Select your printer from the list below:"
 #~ msgstr ""
-#~ "Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung "
-#~ "von G-Code-Dateien auf Ihren Drucker verwenden.\n"
+#~ "Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung von G-Code-Dateien auf Ihren Drucker verwenden.\n"
 #~ "\n"
 #~ "Wählen Sie Ihren Drucker aus der folgenden Liste:"
 
diff --git a/resources/i18n/de_DE/fdmextruder.def.json.po b/resources/i18n/de_DE/fdmextruder.def.json.po
index 76cabf3310..9c87a93214 100644
--- a/resources/i18n/de_DE/fdmextruder.def.json.po
+++ b/resources/i18n/de_DE/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: German\n"
diff --git a/resources/i18n/de_DE/fdmprinter.def.json.po b/resources/i18n/de_DE/fdmprinter.def.json.po
index 264f66656c..10164913d5 100644
--- a/resources/i18n/de_DE/fdmprinter.def.json.po
+++ b/resources/i18n/de_DE/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: German <info@lionbridge.com>, German <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Gibt an, ob die Extruder sich ein Heizelement teilen oder jeweils über ein eigenes verfügen."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Unzulässige Bereiche"
@@ -486,8 +506,8 @@ msgstr "Versatz mit Extruder"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Verwenden Sie den Extruder-Versatz für das Koordinatensystem."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Multiplikator der Linienbreite der ersten Schicht. Eine Erhöhung dieses
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Gehäuse"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Entfernung einer Bewegung nach der Außenwand, um die Z-Naht besser zu verbergen."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Oberfläche Außenhaut Extruder"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Die für das Drucken der obersten Außenhaut verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Oberfläche Außenhaut Schichten"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Die Anzahl der obersten Außenhautschichten. Üblicherweise reicht eine einzige oberste Schicht aus, um höherwertige Oberflächen zu generieren."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extruder Oben/Unten"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Die für das Drucken der oberen und unteren Außenhaut verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Obere/untere Dicke"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Die Dicke der oberen/unteren Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der oberen/unteren Schichten."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Obere Dicke"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Die Dicke der oberen Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der oberen Schichten."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Obere Schichten"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Die Anzahl der oberen Schichten. Wenn diese anhand der oberen Dicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Untere Dicke"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Die Dicke der unteren Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der unteren Schichten."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Untere Schichten"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Die Anzahl der unteren Schichten. Wenn diese anhand der unteren Dicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Erste untere Schichten"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Die Anzahl der ersten Schichten, die auf die Druckplatte aufgetragen werden. Wenn diese anhand der unteren Dicke berechnet werden, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Unteres/oberes Muster"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Das Muster der oberen/unteren Schichten."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linien"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Konzentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zickzack"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Unteres Muster für erste Schicht"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Das Muster am Boden des Drucks der ersten Schicht."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linien"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Konzentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zickzack"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Polygone oben/unten verbinden"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Außenhaut-Pfade oben/unten verbinden, wenn sie nebeneinander laufen. Bei konzentrischen Mustern reduziert die Aktivierung dieser Einstellung die Durchlaufzeit erheblich. Da die Verbindungen jedoch auf halbem Weg über der Füllung erfolgen können, kann diese Funktion die Oberflächenqualität reduzieren."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Richtungen der oberen/unteren Linie"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Eine Liste von Ganzzahl-Linienrichtungen für den Fall, wenn die oberen/unteren Schichten die Linien- oder Zickzack-Muster verwenden. Elemente aus der Liste werden während des Aufbaus der Schichten sequentiell verwendet und wenn das Listenende erreicht wird, beginnt die Liste von vorne. Die Listenobjekte werden durch Kommas getrennt und die gesamte Liste ist in eckige Klammern gesetzt. Standardmäßig ist eine leere Liste vorhanden, was bedeutet, dass herkömmliche Standardwinkel (45- und 135-Grad) verwendet werden."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Einfügung Außenwand"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Bei Aktivierung sind die Z-Naht-Koordinaten relativ zur Mitte der jeweiligen Teile. Bei Deaktivierung definieren die Koordinaten eine absolute Position auf dem Druckbett."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Oberfläche Außenhaut Extruder"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Die für das Drucken der obersten Außenhaut verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Oberfläche Außenhaut Schichten"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Die Anzahl der obersten Außenhautschichten. Üblicherweise reicht eine einzige oberste Schicht aus, um höherwertige Oberflächen zu generieren."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extruder Oben/Unten"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Die für das Drucken der oberen und unteren Außenhaut verwendete Extruder-Einheit. Diese wird für die Mehrfach-Extrusion benutzt."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Obere/untere Dicke"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Die Dicke der oberen/unteren Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der oberen/unteren Schichten."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Obere Dicke"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Die Dicke der oberen Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der oberen Schichten."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Obere Schichten"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Die Anzahl der oberen Schichten. Wenn diese anhand der oberen Dicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Untere Dicke"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Die Dicke der unteren Schichten des Drucks. Dieser Wert geteilt durch die Schichtdicke bestimmt die Anzahl der unteren Schichten."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Untere Schichten"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Die Anzahl der unteren Schichten. Wenn diese anhand der unteren Dicke berechnet wird, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Erste untere Schichten"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Die Anzahl der ersten Schichten, die auf die Druckplatte aufgetragen werden. Wenn diese anhand der unteren Dicke berechnet werden, wird der Wert auf eine ganze Zahl auf- oder abgerundet."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Unteres/oberes Muster"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Das Muster der oberen/unteren Schichten."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linien"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Konzentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zickzack"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Unteres Muster für erste Schicht"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Das Muster am Boden des Drucks der ersten Schicht."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linien"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Konzentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zickzack"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Polygone oben/unten verbinden"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Außenhaut-Pfade oben/unten verbinden, wenn sie nebeneinander laufen. Bei konzentrischen Mustern reduziert die Aktivierung dieser Einstellung die Durchlaufzeit erheblich. Da die Verbindungen jedoch auf halbem Weg über der Füllung erfolgen können, kann diese Funktion die Oberflächenqualität reduzieren."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Richtungen der oberen/unteren Linie"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Eine Liste von Ganzzahl-Linienrichtungen für den Fall, wenn die oberen/unteren Schichten die Linien- oder Zickzack-Muster verwenden. Elemente aus der Liste werden während des Aufbaus der Schichten sequentiell verwendet und wenn das Listenende erreicht wird, beginnt die Liste von vorne. Die Listenobjekte werden durch Kommas getrennt und die gesamte Liste ist in eckige Klammern gesetzt. Standardmäßig ist eine leere Liste vorhanden, was bedeutet, dass herkömmliche Standardwinkel (45- und 135-Grad) verwendet werden."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Keine Außenhaut in Z-Lücken"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Justieren Sie die Überlappung zwischen den Wänden und den Außenhaut-Mittellinien bzw. den Endpunkten der Außenhaut-Mittellinien. Eine geringe Überlappung ermöglicht die feste Verbindung der Wände mit der Außenhaut. Beachten Sie, dass bei einer einheitlichen Linienbreite von Außenhaut und Wand jeder Wert über die Hälfte der Wandbreite bereits dazu führen kann, dass die Außenhaut über die Wand hinausgeht, da in diesem Moment die Position der Düse des Außenhaut-Extruders möglicherweise bereits über die Wandmitte hinausgeht."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Breite für das Entfernen der Außenhaut"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Dies bezeichnet die größte Breite der zu entfernenden Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der Außenhaut oben/unten an abgeschrägten Flächen des Modells unterstützen."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Breite für das Entfernen der Außenhaut oben"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Dies bezeichnet die größte Breite der zu entfernenden oberen Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der oberen Außenhaut an abgeschrägten Flächen des Modells unterstützen."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Breite für das Entfernen der Außenhaut unten"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Dies bezeichnet die größte Breite der zu entfernenden unteren Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der unteren Außenhaut an abgeschrägten Flächen des Modells unterstützen."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Expansionsdistanz Außenhaut"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Die Distanz, um die die Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und die Wände an den angrenzenden Schichten besser an der Außenhaut haften. Niedrigere Werte reduzieren den Materialverbrauch."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Expansionsdistanz Außenhaut oben"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Die Distanz, um die die oberen Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und die Wände an den Schichten darüber besser an der Außenhaut haften. Niedrigere Werte reduzieren den Materialverbrauch."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Expansionsdistanz Außenhaut unten"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Die Distanz, um die die unteren Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und an den Wänden auf der darunter liegenden Schicht haften. Niedrigere Werte reduzieren den Materialverbrauch."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Maximaler Winkel Außenhaut für Expansion"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Mindestbreite Außenhaut für Expansion"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Außenhautbereiche, die schmaler als die Mindestbreite sind, werden nicht expandiert. Damit wird vermieden, dass enge Außenhautbereiche expandiert werden, die entstehen, wenn die Modellfläche eine nahezu vertikale Neigung aufweist."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Füllung"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Der Mindestwinkel für Überhänge, für welche eine Stützstruktur zugefügt wird. Bei einem Wert von 0° werden Objekte komplett gefüllt, bei 90° wird keine Füllung ausgeführt."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Breite für das Entfernen der Außenhaut"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Dies bezeichnet die größte Breite der zu entfernenden Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der Außenhaut oben/unten an abgeschrägten Flächen des Modells unterstützen."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Breite für das Entfernen der Außenhaut oben"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Dies bezeichnet die größte Breite der zu entfernenden oberen Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der oberen Außenhaut an abgeschrägten Flächen des Modells unterstützen."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Breite für das Entfernen der Außenhaut unten"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Dies bezeichnet die größte Breite der zu entfernenden unteren Außenhautbereiche. Jeder Außenhautbereich, der kleiner als dieser Wert ist, verschwindet. Dies kann bei der Beschränkung der benötigten Zeit und Materialmenge für das Drucken der unteren Außenhaut an abgeschrägten Flächen des Modells unterstützen."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Expansionsdistanz Außenhaut"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Die Distanz, um die die Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und die Wände an den angrenzenden Schichten besser an der Außenhaut haften. Niedrigere Werte reduzieren den Materialverbrauch."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Expansionsdistanz Außenhaut oben"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Die Distanz, um die die oberen Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und die Wände an den Schichten darüber besser an der Außenhaut haften. Niedrigere Werte reduzieren den Materialverbrauch."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Expansionsdistanz Außenhaut unten"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Die Distanz, um die die unteren Außenhäute in die Füllung expandiert werden. Höhere Werte lassen die Außenhaut besser am Füllmuster und an den Wänden auf der darunter liegenden Schicht haften. Niedrigere Werte reduzieren den Materialverbrauch."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Maximaler Winkel Außenhaut für Expansion"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Obere und/oder untere Flächen Ihres Objekts mit einem Winkel, der diese Einstellung übersteigt, werden ohne Expansion der oberen/unteren Außenhaut ausgeführt. Damit wird vermieden, dass enge Außenhautbereiche expandiert werden, die entstehen, wenn die Modellfläche eine nahezu vertikale Neigung aufweist. Ein Winkel von 0 Grad ist horizontal, während ein Winkel von 90 Grad vertikal ist."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Mindestbreite Außenhaut für Expansion"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Außenhautbereiche, die schmaler als die Mindestbreite sind, werden nicht expandiert. Damit wird vermieden, dass enge Außenhautbereiche expandiert werden, die entstehen, wenn die Modellfläche eine nahezu vertikale Neigung aufweist."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Stützenstärke für Außenhautkanten"
@@ -2560,8 +2590,8 @@ msgstr "Geschwindigkeit der ersten Schicht"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Die Geschwindigkeit für die erste Schicht. Ein niedrigerer Wert wird empfohlen, um die Haftung an der Druckplatte zu verbessern."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,10 +5104,8 @@ msgstr "Rang der Netzverarbeitung"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Legt fest, welche Priorität dieses Netz (Mesh) bei mehreren überlappenden Mesh-Füllungen hat. Bereiche, in denen mehrere Mesh-Füllungen überlappen, übernehmen"
-" die Einstellungen des Netzes mit dem niedrigsten Rang. Wird eine Mesh-Füllung höher gerankt, führt dies zu einer Modifizierung der Füllungen oder Mesh-Füllungen,"
-" deren Priorität niedriger oder normal ist."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5425,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Der maximale Winkel von Überhängen, nachdem sie druckbar gemacht wurden. Bei einem Wert von 0° werden alle Überhänge durch ein Teil des Modells ersetzt, das mit der Druckplatte verbunden ist, 90° führt zu keiner Änderung des Modells."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Coasting aktivieren"
@@ -6363,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Transformationsmatrix, die beim Laden aus der Datei auf das Modell angewandt wird."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Verwenden Sie den Extruder-Versatz für das Koordinatensystem."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Gehäuse"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Obere und/oder untere Flächen Ihres Objekts mit einem Winkel, der diese Einstellung übersteigt, werden ohne Expansion der oberen/unteren Außenhaut ausgeführt. Damit wird vermieden, dass enge Außenhautbereiche expandiert werden, die entstehen, wenn die Modellfläche eine nahezu vertikale Neigung aufweist. Ein Winkel von 0 Grad ist horizontal, während ein Winkel von 90 Grad vertikal ist."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Die Geschwindigkeit für die erste Schicht. Ein niedrigerer Wert wird empfohlen, um die Haftung an der Druckplatte zu verbessern."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Legt fest, welche Priorität dieses Netz (Mesh) bei mehreren überlappenden Mesh-Füllungen hat. Bereiche, in denen mehrere Mesh-Füllungen überlappen, übernehmen die Einstellungen des Netzes mit dem niedrigsten Rang. Wird eine Mesh-Füllung höher gerankt, führt dies zu einer Modifizierung der Füllungen oder Mesh-Füllungen, deren Priorität niedriger oder normal ist."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Die Temperatur, die für die erhitzte Druckplatte verwendet wird. Wenn dieser Wert 0 beträgt, wird die Betttemperatur nicht angepasst."
diff --git a/resources/i18n/es_ES/cura.po b/resources/i18n/es_ES/cura.po
index 14396c0549..1cd28dffe2 100644
--- a/resources/i18n/es_ES/cura.po
+++ b/resources/i18n/es_ES/cura.po
@@ -1,171 +1,204 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:01+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
+"Language-Team: \n"
 "Language: es_ES\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.4.1\n"
-"Language-Team: \n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconocido"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Cargando máquinas..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Las siguientes impresoras no pueden conectarse porque forman parte de un grupo"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Configurando preferencias...."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impresoras en red disponibles"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Iniciando la máquina activa..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "No reemplazado"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Iniciando el administrador de la máquina..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "¿Seguro que desea eliminar {0}? ¡Esta acción no se puede deshacer!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Iniciando el volumen de impresión..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Configurando escena..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visual"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Cargando interfaz..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "El perfil visual está diseñado para imprimir prototipos y modelos visuales con la intención de obtener una alta calidad visual y de superficies."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Iniciando el motor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "El perfil de ingeniería ha sido diseñado para imprimir prototipos funcionales y piezas de uso final con la intención de obtener una mayor precisión y tolerancias más precisas."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Solo se puede cargar un archivo GCode a la vez. Se omitió la importación de {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Boceto"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Advertencia"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "El perfil del boceto ha sido diseñado para imprimir los prototipos iniciales y la validación del concepto con la intención de reducir el tiempo de impresión de manera considerable."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "No se puede abrir ningún archivo si se está cargando un archivo GCode. Se omitió la importación de {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Error"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "¿Seguro que desea eliminar {0}? ¡Esta acción no se puede deshacer!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Material personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Desconocido"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Perfiles personalizados"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Todos los tipos compatibles ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Todos los archivos (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Fallo de inicio de sesión"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Buscando nueva ubicación para los objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Buscando ubicación"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visual"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "No se puede encontrar una ubicación dentro del volumen de impresión para todos los objetos"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "El perfil visual está diseñado para imprimir prototipos y modelos visuales con la intención de obtener una alta calidad visual y de superficies."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "No se puede encontrar la ubicación"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "No se ha podido crear el archivo desde el directorio de datos de usuario: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "El perfil de ingeniería ha sido diseñado para imprimir prototipos funcionales y piezas de uso final con la intención de obtener una mayor precisión y tolerancias más precisas."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Copia de seguridad"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Boceto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Se ha intentado restaurar una copia de seguridad de Cura sin tener los datos o metadatos adecuados."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "El perfil del boceto ha sido diseñado para imprimir los prototipos iniciales y la validación del concepto con la intención de reducir el tiempo de impresión de manera considerable."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Se ha intentado restaurar una copia de seguridad de Cura superior a la versión actual."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Las siguientes impresoras no pueden conectarse porque forman parte de un grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "La altura del volumen de impresión se ha reducido debido al valor del ajuste «Secuencia de impresión» para evitar que el caballete colisione con los modelos impresos."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Impresoras en red disponibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volumen de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "No reemplazado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura no puede iniciarse"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Envíenos el informe de errores para que podamos solucionar el problema.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Enviar informe de errores a Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Mostrar informe de errores detallado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Mostrar carpeta de configuración"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Realizar copia de seguridad y restablecer configuración"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Informe del accidente"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1078 +249,780 @@ msgstr ""
 "            <p>Utilice el botón \"Enviar informe\" para publicar automáticamente el informe de errores en nuestros servidores.</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Información del sistema"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Desconocido"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Versión de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Idioma de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Idioma del sistema operativo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plataforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Versión Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Versión PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Aún no se ha inicializado<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Versión de OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Proveedor de OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Representador de OpenGL: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Rastreabilidad de errores"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Registros"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Enviar informe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Cargando máquinas..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Configurando preferencias...."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Iniciando la máquina activa..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Iniciando el administrador de la máquina..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Iniciando el volumen de impresión..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Configurando escena..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Cargando interfaz..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Iniciando el motor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Solo se puede cargar un archivo GCode a la vez. Se omitió la importación de {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Advertencia"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "No se puede abrir ningún archivo si se está cargando un archivo GCode. Se omitió la importación de {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Error"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicar y colocar objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Colocando objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Colocando objeto"
+msgid "Login failed"
+msgstr "Fallo de inicio de sesión"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "No se ha podido leer la respuesta."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "No se puede iniciar un nuevo proceso de inicio de sesión. Compruebe si todavía está activo otro intento de inicio de sesión."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "No se puede acceder al servidor de cuentas de Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "El estado indicado no es correcto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Conceda los permisos necesarios al autorizar esta aplicación."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Se ha producido un problema al intentar iniciar sesión, vuelva a intentarlo."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "No se puede iniciar un nuevo proceso de inicio de sesión. Compruebe si todavía está activo otro intento de inicio de sesión."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "No se puede acceder al servidor de cuentas de Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "El archivo ya existe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "El archivo <filename>{0}</filename> ya existe. ¿Está seguro de que desea sobrescribirlo?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL del archivo no válida:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Tobera"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "La configuración se ha cambiado para que coincida con los extrusores disponibles en este momento:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ajustes actualizados"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusores deshabilitados"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Error al exportar el perfil a <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Error al exportar el perfil a <filename>{0}</filename>: Error en el complemento de escritura."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Perfil exportado a <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Exportación correcta"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Error al importar el perfil de <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "No se puede importar el perfil de <filename>{0}</filename> antes de añadir una impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "No hay ningún perfil personalizado para importar en el archivo <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Error al importar el perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Este perfil <filename>{0}</filename> contiene datos incorrectos, no se han podido importar."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Error al importar el perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Perfil {0} importado correctamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "El archivo {0} no contiene ningún perfil válido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "El perfil {0} tiene un tipo de archivo desconocido o está corrupto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Perfil personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Al perfil le falta un tipo de calidad."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Falta la pila global."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "No se puede añadir el perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "El tipo de calidad '{0}' no es compatible con la definición actual de máquina activa '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Advertencia: el perfil no es visible porque su tipo de calidad '{0}' no está disponible para la configuración actual. Cambie a una combinación de material/tobera que pueda utilizar este tipo de calidad."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "No compatible"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Tobera"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "La configuración se ha cambiado para que coincida con los extrusores disponibles en este momento:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Buscando nueva ubicación para los objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ajustes actualizados"
+msgid "Finding Location"
+msgstr "Buscando ubicación"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "No se puede encontrar una ubicación dentro del volumen de impresión para todos los objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusores deshabilitados"
+msgid "Can't Find Location"
+msgstr "No se puede encontrar la ubicación"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "N.º de grupo {group_nr}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Agregar"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Finalizar"
+msgid "Close"
+msgstr "Cerrar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Next"
+msgstr "Siguiente"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "N.º de grupo {group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Finalizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Pared exterior"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Paredes interiores"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Forro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Relleno"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Relleno de soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interfaz de soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Falda"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Torre auxiliar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Desplazamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retracciones"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Otro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Siguiente"
+msgid "Add"
+msgstr "Agregar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Cerrar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asistente del modelo 3D"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Es posible que uno o más modelos 3D no se impriman correctamente debido al tamaño del modelo y la configuración del material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Obtenga más información sobre cómo garantizar la mejor calidad y fiabilidad de impresión posible.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guía de impresión de calidad</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "El archivo del proyecto <filename>{0}</filename> contiene un tipo de máquina desconocida <message>{1}</message>. No se puede importar la máquina, en su lugar, se importarán los modelos."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir archivo de proyecto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "El archivo de proyecto <filename>{0}</filename> está repentinamente inaccesible: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "No se puede abrir el archivo de proyecto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "El archivo de proyecto <filename>{0}</filename> se ha creado con perfiles desconocidos para esta versión de Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Archivo 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "El complemento del Escritor de 3MF está dañado."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "No tiene permiso para escribir el espacio de trabajo aquí."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "El sistema operativo no permite guardar un archivo de proyecto en esta ubicación ni con este nombre de archivo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Error al escribir el archivo 3MF."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Archivo 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Archivo 3MF del proyecto de Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Archivo AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "La altura del volumen de impresión se ha reducido debido al valor del ajuste «Secuencia de impresión» para evitar que el caballete colisione con los modelos impresos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Copias de seguridad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Se ha producido un error al cargar su copia de seguridad."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Creando copia de seguridad..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Se ha producido un error al crear la copia de seguridad."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Cargando su copia de seguridad..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Su copia de seguridad ha terminado de cargarse."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "La copia de seguridad excede el tamaño máximo de archivo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Se ha producido un error al intentar restaurar su copia de seguridad."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Administrar copias de seguridad"
+msgid "Build Volume"
+msgstr "Volumen de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "No se puede segmentar con el material actual, ya que es incompatible con el dispositivo o la configuración seleccionados."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "No se ha podido crear el archivo desde el directorio de datos de usuario: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "No se puede segmentar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Los ajustes actuales no permiten la segmentación. Los siguientes ajustes contienen errores: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Los ajustes de algunos modelos no permiten la segmentación. Los siguientes ajustes contienen errores en uno o más modelos: {error_labels}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "No se puede segmentar porque la torre auxiliar o la posición o posiciones de preparación no son válidas."
+msgid "Backup"
+msgstr "Copia de seguridad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "No se puede segmentar porque hay objetos asociados al extrusor %s que está deshabilitado."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Se ha intentado restaurar una copia de seguridad de Cura sin tener los datos o metadatos adecuados."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Revise la configuración y compruebe si sus modelos:\n"
-" - Se integran en el volumen de impresión\n"
-"- Están asignados a un extrusor activado\n"
-" - No están todos definidos como mallas modificadoras"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Se ha intentado restaurar una copia de seguridad de Cura superior a la versión actual."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Procesando capas"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicar y colocar objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Información"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil de cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "No se pudo acceder a la información actualizada."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Puede que haya nuevas funciones o correcciones de errores disponibles para {machine_name}. Si no tiene la última versión disponible, se recomienda actualizar el firmware de la impresora a la versión {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nuevo firmware de %s disponible"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Cómo actualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Actualizar firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Archivo GCode comprimido"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter no es compatible con el modo texto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Archivo GCode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analizar GCode"
+msgid "Placing Objects"
+msgstr "Colocando objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Datos de GCode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Asegúrese de que el GCode es adecuado para la impresora y para su configuración antes de enviar el archivo a la misma. Es posible que la representación del GCode no sea precisa."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Archivo G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter no es compatible con el modo sin texto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Prepare el Gcode antes de la exportación."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagen JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagen JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagen PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagen BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagen GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfiles de Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ajustes de la máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Supervisar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ajustes por modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar ajustes por modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Posprocesamiento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar GCode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Vista previa"
+msgid "Placing Object"
+msgstr "Colocando objeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Guardar en unidad extraíble"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Guardar en unidad extraíble {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "¡No hay formatos de archivo disponibles con los que escribir!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Guardando en unidad extraíble <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Guardando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "No se pudo guardar en <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "No se pudo encontrar un nombre de archivo al tratar de escribir en {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "No se pudo guardar en unidad extraíble {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Guardado en unidad extraíble {0} como {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Archivo guardado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Expulsar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Expulsar dispositivo extraíble {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Expulsado {0}. Ahora puede retirar de forma segura la unidad."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirar de forma segura el hardware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Error al expulsar {0}. Es posible que otro programa esté utilizando la unidad."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Unidad extraíble"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura no muestra correctamente las capas si la impresión de alambre está habilitada."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vista de simulación"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "No se muestra nada porque primero hay que cortar."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "No hay capas para mostrar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "No volver a mostrar este mensaje"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vista de capas"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Su modelo no es funcional. Las áreas resaltadas indican que faltan superficies o son extrañas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Errores de modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vista de sólidos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Bloqueador de soporte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Cree un volumen que no imprima los soportes."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "¿Desea sincronizar el material y los paquetes de software con su cuenta?"
+msgid "AMF File"
+msgstr "Archivo AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Se han detectado cambios desde su cuenta de Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Archivo GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Actualizar firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Archivo X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Rechazar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Estoy de acuerdo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Acuerdo de licencia de complemento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Rechazar y eliminar de la cuenta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Error al descargar los complementos {}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Sincronizando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Se han detectado cambios desde su cuenta de Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Tiene que salir y reiniciar {} para que los cambios surtan efecto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Error al descargar los complementos {}"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "¿Desea sincronizar el material y los paquetes de software con su cuenta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Ajustes por modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF binario"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar ajustes por modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF incrustado JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Posprocesamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange comprimido"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "No se puede segmentar con el material actual, ya que es incompatible con el dispositivo o la configuración seleccionados."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Paquete de formato Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "No se puede segmentar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "No se puede escribir en el archivo UFP:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Los ajustes actuales no permiten la segmentación. Los siguientes ajustes contienen errores: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar placa de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Los ajustes de algunos modelos no permiten la segmentación. Los siguientes ajustes contienen errores en uno o más modelos: {error_labels}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Seleccionar actualizaciones"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "No se puede segmentar porque la torre auxiliar o la posición o posiciones de preparación no son válidas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir mediante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "No se puede segmentar porque hay objetos asociados al extrusor %s que está deshabilitado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir mediante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Revise la configuración y compruebe si sus modelos:\n"
+" - Se integran en el volumen de impresión\n"
+"- Están asignados a un extrusor activado\n"
+" - No están todos definidos como mallas modificadoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Conectado mediante cloud"
+msgid "Processing Layers"
+msgstr "Procesando capas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de error desconocido al cargar el trabajo de impresión: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Información"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impresión USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir mediante USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir mediante USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Conectado mediante USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Se está realizando una impresión con USB, si cierra Cura detendrá la impresión. ¿Desea continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Todavía hay una impresión en curso. Cura no puede iniciar otra impresión a través de USB hasta que se haya completado la impresión anterior."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impresión en curso"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil de cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Conectar a través de la red"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Se ha detectado una nueva impresora en su cuenta de Ultimaker"
 msgstr[1] "Se han detectado nuevas impresoras en su cuenta de Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Añadiendo la impresora {name} ({model}) de su cuenta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1295,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... y {0} más"
 msgstr[1] "... y {0} más"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impresoras añadidas desde Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "La conexión a la nube no está disponible para una impresora"
 msgstr[1] "La conexión a la nube no está disponible para algunas impresoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impresora no está vinculada a Digital Factory:"
 msgstr[1] "Estas impresoras no están vinculadas a Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para establecer una conexión, visite {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Mantener las configuraciones de la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Eliminar impresoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} se eliminará hasta la próxima sincronización de la cuenta."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para eliminar {printer_name} permanentemente, visite {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "¿Seguro que desea eliminar {printer_name} temporalmente?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "¿Eliminar impresoras?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1374,2097 +1110,2494 @@ msgstr[1] ""
 "Está a punto de eliminar {0} impresoras de Cura. Esta acción no se puede deshacer.\n"
 "¿Seguro que desea continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Está a punto de eliminar todas las impresoras de Cura. Esta acción no se puede deshacer.¿Seguro que desea continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Envíe y supervise sus trabajos de impresión desde cualquier lugar a través de su cuenta de Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir mediante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Conectar con Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir mediante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Empezar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Conectado mediante cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de error desconocido al cargar el trabajo de impresión: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Está intentando conectarse a una impresora que no está ejecutando Ultimaker Connect. Actualice la impresora al firmware más reciente."
+msgid "tomorrow"
+msgstr "mañana"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Actualice su impresora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura ha detectado perfiles de material que aún no estaban instalados en la impresora host del grupo {0}."
+msgid "Sending Print Job"
+msgstr "Enviando trabajo de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviando materiales a la impresora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Cargando el trabajo de impresión a la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Está intentando conectarse a {0} pero ese no es el host de un grupo. Puede visitar la página web para configurarlo como host de grupo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "No es un host de grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurar grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Envíe y supervise sus trabajos de impresión desde cualquier lugar a través de su cuenta de Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Conectar con Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Empezar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Espere hasta que se envíe el trabajo actual."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Error de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "No se han podido cargar los datos en la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Error de red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Enviando trabajo de impresión"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura ha detectado perfiles de material que aún no estaban instalados en la impresora host del grupo {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Cargando el trabajo de impresión a la impresora."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Enviando materiales a la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "La cola de trabajos de impresión está llena. La impresora no puede aceptar trabajos nuevos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Cola llena"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "El trabajo de impresión se ha enviado correctamente a la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Fecha de envío"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Está intentando conectarse a una impresora que no está ejecutando Ultimaker Connect. Actualice la impresora al firmware más reciente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Actualice su impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimir a través de la red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprime a través de la red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Conectado a través de la red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Conectar a través de la red"
+msgid "Select upgrades"
+msgstr "Seleccionar actualizaciones"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "mañana"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "hoy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impresión USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir mediante USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "El archivo del proyecto <filename>{0}</filename> contiene un tipo de máquina desconocida <message>{1}</message>. No se puede importar la máquina, en su lugar, se importarán los modelos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir mediante USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir archivo de proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Conectado mediante USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "El archivo de proyecto <filename>{0}</filename> está repentinamente inaccesible: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Se está realizando una impresión con USB, si cierra Cura detendrá la impresión. ¿Desea continuar?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "No se puede abrir el archivo de proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Todavía hay una impresión en curso. Cura no puede iniciar otra impresión a través de USB hasta que se haya completado la impresión anterior."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impresión en curso"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "El archivo de proyecto <filename>{0}</filename> se ha creado con perfiles desconocidos para esta versión de Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Archivo X3D"
+msgid "3MF File"
+msgstr "Archivo 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista de rayos X"
+msgid "Compressed G-code File"
+msgstr "Archivo GCode comprimido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Algunos elementos pueden causar problemas durante la impresión. Haga clic para ver consejos sobre cómo ajustarlos."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter no es compatible con el modo texto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir proyecto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asistente del modelo 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Actualizar existente"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Es posible que uno o más modelos 3D no se impriman correctamente debido al tamaño del modelo y la configuración del material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Obtenga más información sobre cómo garantizar la mejor calidad y fiabilidad de impresión posible.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guía de impresión de calidad</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Crear nuevo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "No se pudo acceder a la información actualizada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumen: proyecto de Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Puede que haya nuevas funciones o correcciones de errores disponibles para {machine_name}. Si no tiene la última versión disponible, se recomienda actualizar el firmware de la impresora a la versión {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ajustes de la impresora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nuevo firmware de %s disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en la máquina?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Cómo actualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Archivo G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo de impresoras"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analizar GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ajustes del perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Datos de GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Asegúrese de que el GCode es adecuado para la impresora y para su configuración antes de enviar el archivo a la misma. Es posible que la representación del GCode no sea precisa."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Bloqueador de soporte"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en el perfil?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Cree un volumen que no imprima los soportes."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nombre"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "No está en el perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF binario"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 sobrescrito"
-msgstr[1] "%1 sobrescritos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF incrustado JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 sobrescrito"
-msgstr[1] "%1, %2 sobrescritos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange comprimido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ajustes del material"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Paquete de formato Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "¿Cómo debería solucionarse el conflicto en el material?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfiles de Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidad de los ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Supervisar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Ajustes visibles:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista de rayos X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de un total de %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Error al escribir el archivo 3MF."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Si carga un proyecto, se borrarán todos los modelos de la placa de impresión."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Archivo 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Archivo 3MF del proyecto de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "¿Desea obtener más información?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "El complemento del Escritor de 3MF está dañado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Realizar copia de seguridad ahora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "No tiene permiso para escribir el espacio de trabajo aquí."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Copia de seguridad automática"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "El sistema operativo no permite guardar un archivo de proyecto en esta ubicación ni con este nombre de archivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Crea una copia de seguridad de forma automática cada día que inicia Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Vista previa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vista de capas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Eliminar copia de seguridad"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura no muestra correctamente las capas si la impresión de alambre está habilitada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "¿Seguro que desea eliminar esta copia de seguridad? Esta acción no se puede deshacer."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Vista de simulación"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar copia de seguridad"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "No se muestra nada porque primero hay que cortar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Deberá reiniciar Cura para restaurar su copia de seguridad. ¿Desea cerrar Cura ahora?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "No hay capas para mostrar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versión de Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "No volver a mostrar este mensaje"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ajustes de la máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiales"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vista de sólidos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfiles"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Complementos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Copias de seguridad de Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mis copias de seguridad"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "No se puede escribir en el archivo UFP:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Actualmente no posee ninguna copia de seguridad. Utilice el botón de Realizar copia de seguridad ahora para crear una."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter no es compatible con el modo sin texto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante la fase de vista previa, solo se mostrarán 5 copias de seguridad. Elimine una copia de seguridad para ver copias de seguridad antiguas."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Prepare el Gcode antes de la exportación."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Realice una copia de seguridad y sincronice sus ajustes de Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagen JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Iniciar sesión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagen JPEG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Imagen PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Imagen BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagen GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Se ha producido un error al intentar restaurar su copia de seguridad."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Copias de seguridad"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Se ha producido un error al cargar su copia de seguridad."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Creando copia de seguridad..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Se ha producido un error al crear la copia de seguridad."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Cargando su copia de seguridad..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Su copia de seguridad ha terminado de cargarse."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "La copia de seguridad excede el tamaño máximo de archivo."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Administrar copias de seguridad"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Actualizar firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "El firmware es la parte del software que se ejecuta directamente en la impresora 3D. Este firmware controla los motores de pasos, regula la temperatura y, finalmente, hace que funcione la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "El firmware que se envía con las nuevas impresoras funciona, pero las nuevas versiones suelen tener más funciones y mejoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Actualización de firmware automática"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Cargar firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "No se puede actualizar el firmware porque no hay conexión con la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "No se puede actualizar el firmware porque la conexión con la impresora no permite actualizaciones de firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Seleccionar firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Actualización del firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Actualización del firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Actualización del firmware completada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Se ha producido un error al actualizar el firmware debido a un error desconocido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Se ha producido un error al actualizar el firmware debido a un error de comunicación."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Se ha producido un error al actualizar el firmware debido a un error de entrada/salida."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Se ha producido un error al actualizar el firmware porque falta el firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Convertir imagen..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distancia máxima de cada píxel desde la \"Base\"."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Tiene que aceptar la licencia para instalar el paquete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Cambios desde su cuenta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "La altura de la base desde la placa de impresión en milímetros."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Descartar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Siguiente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La anchura en milímetros en la placa de impresión."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Se añadirán los siguientes paquetes:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Anchura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Los siguientes paquetes no se pueden instalar debido a una versión no compatible de Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profundidad en milímetros en la placa de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Confirmar desinstalación"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidad (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Va a desinstalar materiales o perfiles que todavía están en uso. Si confirma la desinstalación, los siguientes materiales o perfiles volverán a sus valores predeterminados."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para las litofanías, los píxeles oscuros deben coincidir con ubicaciones más gruesas para bloquear la entrada de más luz. En los mapas de altura, los píxeles más claros se corresponden con un terreno más alto, por lo que dichos píxeles deben coincidir con ubicaciones más gruesas en el modelo 3D generado."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiales"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Cuanto más oscuro más alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Perfiles"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Cuanto más claro más alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Confirmar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Para las litofanías hay disponible un modelo logarítmico simple para la translucidez. En los mapas de altura, los valores de los píxeles corresponden a las alturas linealmente."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "No se ha podido conectar con la base de datos del Paquete Cura. Compruebe la conexión."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineal"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contribuciones de la comunidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Complementos de la comunidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "El porcentaje de luz que penetra en una impresión con un grosor de 1 milímetro. Bajar este valor aumenta el contraste en las regiones oscuras y disminuye el contraste en las regiones claras de la imagen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Materiales genéricos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmitancia de 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La cantidad de suavizado que se aplica a la imagen."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Última actualización"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavizado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Aceptar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Descargas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impresora"
+msgid "Installed plugins"
+msgstr "Complementos instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ajustes de la tobera"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "No se ha instalado ningún complemento."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamaño de la tobera"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Materiales instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "No se ha instalado ningún material."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diámetro del material compatible"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Complementos agrupados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Desplazamiento de la tobera sobre el eje X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Materiales agrupados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Desplazamiento de la tobera sobre el eje Y"
+msgid "Website"
+msgstr "Sitio web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número de ventilador de enfriamiento"
+msgid "Email"
+msgstr "Correo electrónico"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "GCode inicial del extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Inicie sesión para obtener complementos y materiales verificados para Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "GCode final del extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Iniciar sesión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ajustes de la impresora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Buscando paquetes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (anchura)"
+msgid "Compatibility"
+msgstr "Compatibilidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (profundidad)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (altura)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma de la placa de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origen en el centro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Calidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Plataforma calentada"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Especificaciones técnicas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volumen de impresión calentado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Especificaciones de seguridad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Tipo de GCode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Directrices de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ajustes del cabezal de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Sitio web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Complementos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiales"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X máx."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Instalado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Ir a Web Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura del puente"
+msgid "Will install upon restarting"
+msgstr "Se instalará después de reiniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de extrusores"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Actualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Iniciar GCode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Actualizando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Finalizar GCode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Actualizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Asegúrese de que la impresora está conectada:\n"
-"- Compruebe que la impresora está encendida.\n"
-"- Compruebe que la impresora está conectada a la red.\n"
-"- Compruebe que ha iniciado sesión para ver impresoras conectadas a la nube."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Inicie sesión</a> para realizar la actualización"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Degradar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Desinstalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Instalado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Inicie sesión</a> para realizar la instalación o la actualización"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href=”%1”>Comprar bobinas de material</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Prémium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Buscar materiales"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Conecte su impresora a la red."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Tendrá que reiniciar Cura para que los cambios de los paquetes surtan efecto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuales de usuario en línea"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Salir de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Atrás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Instalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Tipo de malla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modelo normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimir como soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modificar los ajustes de las superposiciones"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "No es compatible con superposiciones"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Solo malla de relleno"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Cortar malla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Seleccionar ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Seleccionar ajustes o personalizar este modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Mostrar todo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Complemento de posprocesamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Secuencias de comandos de posprocesamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Añadir secuencia de comando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Cambiar las secuencias de comandos de posprocesamiento."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "La siguiente secuencia de comandos está activa:"
 msgstr[1] "Las siguientes secuencias de comandos están activas:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Combinación de colores"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Color del material"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de línea"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Grosor de la capa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo de compatibilidad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Desplazamientos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Asistentes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Shell"
-msgstr "Perímetro"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Relleno"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Mostrar solo capas superiores"
+msgid "Queued"
+msgstr "En cola"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mostrar cinco capas detalladas en la parte superior"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gestionar en el navegador"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superior o inferior"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "No hay trabajos de impresión en la cola. Segmentar y enviar un trabajo para añadir uno."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Pared interior"
+msgid "Print jobs"
+msgstr "Trabajos de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "mín."
+msgid "Total print time"
+msgstr "Tiempo de impresión total"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "máx."
+msgid "Waiting for"
+msgstr "Esperando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Más información sobre la recopilación de datos anónimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario. A continuación, hay un ejemplo de todos los datos que se comparten:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "No deseo enviar datos anónimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir el envío de datos anónimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Atrás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Placa de impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Soporte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Calidad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Especificaciones técnicas"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Especificaciones de seguridad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Directrices de impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sitio web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Inicie sesión</a> para realizar la instalación o la actualización"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=”%1”>Comprar bobinas de material</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Actualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Actualizando"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Actualizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Prémium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir a Web Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Buscar materiales"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Tendrá que reiniciar Cura para que los cambios de los paquetes surtan efecto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Salir de %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Complementos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiales"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Se instalará después de reiniciar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Inicie sesión</a> para realizar la actualización"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Degradar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+msgid "Configuration Changes"
+msgstr "Cambios de configuración"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Cambios desde su cuenta"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Descartar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Siguiente"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Se añadirán los siguientes paquetes:"
+msgid "Override"
+msgstr "Anular"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Los siguientes paquetes no se pueden instalar debido a una versión no compatible de Cura:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmar desinstalación"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Va a desinstalar materiales o perfiles que todavía están en uso. Si confirma la desinstalación, los siguientes materiales o perfiles volverán a sus valores predeterminados."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiales"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfiles"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Es necesario realizar el siguiente cambio de configuración en la impresora asignada %1:"
+msgstr[1] "Es necesario realizar los siguientes cambios de configuración en la impresora asignada %1:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Tiene que aceptar la licencia para instalar el paquete"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Se ha asignado la impresora %1, pero el trabajo tiene una configuración de material desconocido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Sitio web"
+msgid "Change material %1 from %2 to %3."
+msgstr "Cambiar material %1, de %2 a %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "Correo electrónico"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Cargar %3 como material %1 (no se puede anular)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versión"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Cambiar print core %1, de %2 a %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Última actualización"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Cambiar la placa de impresión a %1 (no se puede anular)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Al sobrescribir la configuración se usarán los ajustes especificados con la configuración de impresora existente. Esto podría provocar un fallo en la impresión."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Descargas"
+msgid "Glass"
+msgstr "Vidrio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuciones de la comunidad"
+msgid "Aluminum"
+msgstr "Aluminio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Complementos de la comunidad"
+msgid "Unavailable printer"
+msgstr "Impresora no disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiales genéricos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "No se ha podido conectar con la base de datos del Paquete Cura. Compruebe la conexión."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Complementos instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "No se ha instalado ningún complemento."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiales instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "No se ha instalado ningún material."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Complementos agrupados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiales agrupados"
+msgid "First available"
+msgstr "Primera disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Buscando paquetes..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Inicie sesión para obtener complementos y materiales verificados para Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelación de la placa de impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Ahora puede ajustar la placa de impresión para asegurarse de que sus impresiones salgan muy bien. Al hacer clic en 'Mover a la siguiente posición', la tobera se trasladará a las diferentes posiciones que se pueden ajustar."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posición: inserte una hoja de papel debajo de la tobera y ajuste la altura de la placa de impresión. La altura de la placa de impresión es correcta cuando el papel queda ligeramente sujeto por la punta de la tobera."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar nivelación de la placa de impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mover a la siguiente posición"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Seleccione cualquier actualización de Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Placa de impresión caliente (kit oficial o construida por usted mismo)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Actualice el firmware de la impresora para gestionar la cola de forma remota."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Conectar con la impresora en red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir directamente a través de la red, asegúrese de que la impresora está conectada a la red mediante un cable de red o conéctela a la red wifi. Si no conecta Cura con la impresora, también puede utilizar una unidad USB para transferir archivos GCode a la impresora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Seleccione la impresora en la lista siguiente:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Eliminar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Actualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si la impresora no aparece en la lista, lea la <a href='%1'>guía de solución de problemas de impresión y red</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versión de firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Dirección"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impresora no está configurada para alojar un grupo de impresoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impresora aloja un grupo de %1 impresoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "La impresora todavía no ha respondido en esta dirección."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Conectar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Dirección IP no válida"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Introduzca una dirección IP válida."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Dirección de la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Introduzca la dirección IP de la impresora en la red."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Cambios de configuración"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Anular"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Es necesario realizar el siguiente cambio de configuración en la impresora asignada %1:"
-msgstr[1] "Es necesario realizar los siguientes cambios de configuración en la impresora asignada %1:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Se ha asignado la impresora %1, pero el trabajo tiene una configuración de material desconocido."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Cambiar material %1, de %2 a %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Cargar %3 como material %1 (no se puede anular)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Cambiar print core %1, de %2 a %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Cambiar la placa de impresión a %1 (no se puede anular)."
+msgid "OK"
+msgstr "Aceptar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Al sobrescribir la configuración se usarán los ajustes especificados con la configuración de impresora existente. Esto podría provocar un fallo en la impresión."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir a través de la red"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Vidrio"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminio"
+msgid "Printer selection"
+msgstr "Selección de la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover al principio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Borrar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reanudar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pausando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reanudando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Cancelando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "¿Seguro que desea mover %1 al principio de la cola?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Mover trabajo de impresión al principio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "¿Seguro que desea borrar %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Borrar trabajo de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "¿Seguro que desea cancelar %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Cancela la impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Cancelado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Cancelando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pausando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "En pausa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Reanudando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Acción requerida"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina el %1 a las %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Administrar impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Actualice el firmware de la impresora para gestionar la cola de forma remota."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Cargando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "No disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "No se puede conectar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Sin actividad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Imprimiendo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sin título"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anónimo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Debe cambiar la configuración"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalles"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impresora no disponible"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Seleccione cualquier actualización de Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Primera disponible"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Placa de impresión caliente (kit oficial o construida por usted mismo)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Cancelado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelación de la placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Ahora puede ajustar la placa de impresión para asegurarse de que sus impresiones salgan muy bien. Al hacer clic en 'Mover a la siguiente posición', la tobera se trasladará a las diferentes posiciones que se pueden ajustar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posición: inserte una hoja de papel debajo de la tobera y ajuste la altura de la placa de impresión. La altura de la placa de impresión es correcta cuando el papel queda ligeramente sujeto por la punta de la tobera."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Cancelando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar nivelación de la placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pausando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mover a la siguiente posición"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "En pausa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Reanudando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Actualizar existente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Acción requerida"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Crear nuevo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina el %1 a las %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumen: proyecto de Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ajustes de la impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en la máquina?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo de impresoras"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ajustes del perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en el perfil?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nombre"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "No está en el perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 sobrescrito"
+msgstr[1] "%1 sobrescritos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 sobrescrito"
+msgstr[1] "%1, %2 sobrescritos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ajustes del material"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "¿Cómo debería solucionarse el conflicto en el material?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidad de los ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Ajustes visibles:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de un total de %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Si carga un proyecto, se borrarán todos los modelos de la placa de impresión."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Algunos elementos pueden causar problemas durante la impresión. Haga clic para ver consejos sobre cómo ajustarlos."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Asegúrese de que la impresora está conectada:\n"
+"- Compruebe que la impresora está encendida.\n"
+"- Compruebe que la impresora está conectada a la red.\n"
+"- Compruebe que ha iniciado sesión para ver impresoras conectadas a la nube."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Conecte su impresora a la red."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuales de usuario en línea"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Más información sobre la recopilación de datos anónimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario. A continuación, hay un ejemplo de todos los datos que se comparten:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "No deseo enviar datos anónimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir el envío de datos anónimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "En cola"
+msgid "Color scheme"
+msgstr "Combinación de colores"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gestionar en el navegador"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Color del material"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de línea"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidad"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "No hay trabajos de impresión en la cola. Segmentar y enviar un trabajo para añadir uno."
+msgid "Compatibility Mode"
+msgstr "Modo de compatibilidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabajos de impresión"
+msgid "Travels"
+msgstr "Desplazamientos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Tiempo de impresión total"
+msgid "Helpers"
+msgstr "Asistentes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Esperando"
+msgid "Shell"
+msgstr "Perímetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir a través de la red"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Relleno"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Selección de la impresora"
+msgid "Only Show Top Layers"
+msgstr "Mostrar solo capas superiores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Iniciar sesión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mostrar cinco capas detalladas en la parte superior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Su clave para una impresión 3D conectada"
+msgid "Top / Bottom"
+msgstr "Superior o inferior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personalice su experiencia con más perfiles de impresión y complementos\n"
-"- Consiga más flexibilidad sincronizando su configuración y cargándola en cualquier lugar\n"
-"- Aumente la eficiencia con un flujo de trabajo remoto en las impresoras Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Pared interior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Crear cuenta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "mín."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Comprobando..."
+msgid "max"
+msgstr "máx."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ajustes de la tobera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Cuenta sincronizada"
+msgid "Nozzle size"
+msgstr "Tamaño de la tobera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Se ha producido un error..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalar actualizaciones pendientes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diámetro del material compatible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Buscar actualizaciones de la cuenta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Desplazamiento de la tobera sobre el eje X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Última actualización: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Desplazamiento de la tobera sobre el eje Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Cuenta de Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Número de ventilador de enfriamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Cerrar sesión"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "GCode inicial del extrusor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "GCode final del extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ajustes de la impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Ningún cálculo de tiempo disponible"
+msgid "X (Width)"
+msgstr "X (anchura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Ningún cálculo de costes disponible"
+msgid "Y (Depth)"
+msgstr "Y (profundidad)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Vista previa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (altura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimación de tiempos"
+msgid "Build plate shape"
+msgstr "Forma de la placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimación de material"
+msgid "Origin at center"
+msgstr "Origen en el centro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Plataforma calentada"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volumen de impresión calentado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Segmentando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Tipo de GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "No se puede segmentar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ajustes del cabezal de impresión"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X máx."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y máx."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Altura del puente"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de extrusores"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Iniciar GCode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Finalizar GCode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Convertir imagen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distancia máxima de cada píxel desde la \"Base\"."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "La altura de la base desde la placa de impresión en milímetros."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "La anchura en milímetros en la placa de impresión."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Anchura (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profundidad en milímetros en la placa de impresión"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidad (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para las litofanías, los píxeles oscuros deben coincidir con ubicaciones más gruesas para bloquear la entrada de más luz. En los mapas de altura, los píxeles más claros se corresponden con un terreno más alto, por lo que dichos píxeles deben coincidir con ubicaciones más gruesas en el modelo 3D generado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Cuanto más oscuro más alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Cuanto más claro más alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Para las litofanías hay disponible un modelo logarítmico simple para la translucidez. En los mapas de altura, los valores de los píxeles corresponden a las alturas linealmente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineal"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "El porcentaje de luz que penetra en una impresión con un grosor de 1 milímetro. Bajar este valor aumenta el contraste en las regiones oscuras y disminuye el contraste en las regiones claras de la imagen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmitancia de 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La cantidad de suavizado que se aplica a la imagen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavizado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mis copias de seguridad"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Actualmente no posee ninguna copia de seguridad. Utilice el botón de Realizar copia de seguridad ahora para crear una."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante la fase de vista previa, solo se mostrarán 5 copias de seguridad. Elimine una copia de seguridad para ver copias de seguridad antiguas."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Realice una copia de seguridad y sincronice sus ajustes de Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Procesando"
+msgid "Want more?"
+msgstr "¿Desea obtener más información?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Segmentación"
+msgid "Backup Now"
+msgstr "Realizar copia de seguridad ahora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Iniciar el proceso de segmentación"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Copia de seguridad automática"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Crea una copia de seguridad de forma automática cada día que inicia Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versión de Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiales"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfiles"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Complementos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Restore"
+msgstr "Restaurar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostrar Guía de resolución de problemas en línea"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Eliminar copia de seguridad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Alternar pantalla completa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "¿Seguro que desea eliminar esta copia de seguridad? Esta acción no se puede deshacer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Salir de modo de pantalla completa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar copia de seguridad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "Des&hacer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Deberá reiniciar Cura para restaurar su copia de seguridad. ¿Desea cerrar Cura ahora?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Rehacer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Copias de seguridad de Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Archivo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Guardar proyecto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Salir"
+msgid "Export Selection..."
+msgstr "Exportar selección..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Vista en 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &reciente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Seleccionar configuración"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configuraciones"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configuraciones"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Habilitado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilice pegamento con esta combinación de materiales para lograr una mejor adhesión."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuración no se encuentra disponible porque %1 es un perfil desconocido. Visite %2 para descargar el perfil de materiales correcto."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marketplace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Cargando configuraciones disponibles desde la impresora..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Las configuraciones no se encuentran disponibles porque la impresora no está conectada."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ver"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Vista frontal"
+msgid "&Camera position"
+msgstr "&Posición de la cámara"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Vista superior"
+msgid "Camera view"
+msgstr "Vista de cámara"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Vista del lado izquierdo"
+msgid "Perspective"
+msgstr "Perspectiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Vista del lado derecho"
+msgid "Orthographic"
+msgstr "Ortográfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configurar Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "P&laca de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Agregar impresora..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impresoras de red habilitadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Adm&inistrar impresoras ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impresoras locales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Administrar materiales..."
+msgid "Visible Settings"
+msgstr "Ajustes visibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Añadir más materiales de Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Actualizar perfil con ajustes o sobrescrituras actuales"
+msgid "Collapse All Categories"
+msgstr "Contraer todas las categorías"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Descartar cambios actuales"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gestionar visibilidad de los ajustes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Crear perfil a partir de ajustes o sobrescrituras actuales..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "A&justes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Administrar perfiles..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Mostrar &documentación en línea"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Informar de un &error"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir como extrusor activo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Novedades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Habilitar extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Acerca de..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Deshabilitar extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Eliminar modelo seleccionado"
-msgstr[1] "Eliminar modelos seleccionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centrar modelo seleccionado"
-msgstr[1] "Centrar modelos seleccionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir modelo seleccionado con:"
+msgstr[1] "Imprimir modelos seleccionados con:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Multiplicar modelo seleccionado"
 msgstr[1] "Multiplicar modelos seleccionados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Eliminar modelo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Número de copias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ce&ntrar modelo en plataforma"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "A&grupar modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfiles personalizados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Desagrupar modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar cambios actuales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Co&mbinar modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Multiplicar modelo..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n"
+"\n"
+"Haga clic para abrir el administrador de perfiles."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Seleccionar todos los modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Encendido"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Borrar placa de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Apagado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Recargar todos los modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimental"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Organizar todos los modelos en todas las placas de impresión"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Organizar todos los modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Organizar selección"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ajustes de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Restablecer las posiciones de todos los modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuración de impresión deshabilitada. No se puede modificar el archivo GCode."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Restablecer las transformaciones de todos los modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Relleno gradual"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Abrir archivo(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un relleno gradual aumentará gradualmente la cantidad de relleno hacia arriba."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nuevo proyecto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Perfiles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Mostrar carpeta de configuración"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Ha modificado algunos ajustes del perfil. Si desea cambiarlos, hágalo en el modo personalizado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar visibilidad de los ajustes..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Soporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Generar estructuras para soportar piezas del modelo que tengan voladizos. Sin estas estructuras, estas piezas se romperían durante la impresión."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este paquete se instalará después de reiniciar."
+msgid "Adhesion"
+msgstr "Adherencia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "General"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Habilita la impresión de un borde o una balsa. Esta opción agregará un área plana alrededor del objeto, que es fácil de cortar después."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "No hay ningún perfil %1 para configuración en %2 extrusor. En su lugar se utilizará la opción predeterminada"
+msgstr[1] "No hay ningún perfil %1 para configuraciones en %2 extrusores. En su lugar se utilizará la opción predeterminada"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impresoras"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfiles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Activar impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Cerrando %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nombre del trabajo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "¿Seguro que desea salir de %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tiempo de impresión"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Tiempo restante estimado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir archivo(s)"
+msgid "Discard or Keep changes"
+msgstr "Descartar o guardar cambios"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar paquete"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Ha personalizado algunos ajustes del perfil.\n"
+"¿Le gustaría mantener estos ajustes cambiados después de cambiar de perfil?\n"
+"También puede descartar los cambios para cargar los valores predeterminados de'%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir archivo(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Ajustes del perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Hemos encontrado uno o más archivos de GCode entre los archivos que ha seleccionado. Solo puede abrir los archivos GCode de uno en uno. Si desea abrir un archivo GCode, seleccione solo uno."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Cambios actuales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Agregar impresora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Preguntar siempre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novedades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Descartar y no volver a preguntar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Guardar y no volver a preguntar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Descartar los cambios"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Mantener los cambios"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Acerca de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versión: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solución completa para la impresión 3D de filamento fundido."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3473,1982 +3606,2103 @@ msgstr ""
 "Ultimaker B.V. ha desarrollado Cura en cooperación con la comunidad.\n"
 "Cura se enorgullece de utilizar los siguientes proyectos de código abierto:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interfaz gráfica de usuario (GUI)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Entorno de la aplicación"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generador de GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicación entre procesos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Lenguaje de programación"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Entorno de la GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Enlaces del entorno de la GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de enlaces C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de intercambio de datos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Biblioteca de apoyo para cálculos científicos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de apoyo para cálculos más rápidos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de apoyo para gestionar archivos STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Biblioteca de compatibilidad para trabajar con objetos planos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de compatibilidad para trabajar con mallas triangulares"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de compatibilidad para trabajar con archivos 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de compatibilidad para metadatos y transmisión de archivos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicación en serie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de detección para Zeroconf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recorte de polígonos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Comprobador de tipo estático para Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados de raíz para validar la fiabilidad del SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de seguimiento de errores de Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de empaquetado de polígonos, desarrollada por Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Enlaces de Python para libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Fuente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Iconos SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementación de la aplicación de distribución múltiple de Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir archivo de proyecto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este es un archivo de proyecto Cura. ¿Le gustaría abrirlo como un proyecto o importar sus modelos?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Recordar mi selección"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como proyecto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Descartar o guardar cambios"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Ha personalizado algunos ajustes del perfil.\n"
-"¿Le gustaría mantener estos ajustes cambiados después de cambiar de perfil?\n"
-"También puede descartar los cambios para cargar los valores predeterminados de'%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Ajustes del perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Cambios actuales"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Preguntar siempre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Descartar y no volver a preguntar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Guardar y no volver a preguntar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Descartar los cambios"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Mantener los cambios"
+msgid "Open file(s)"
+msgstr "Abrir archivo(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Hemos encontrado uno o más archivos del proyecto entre los archivos que ha seleccionado. Solo puede abrir los archivos de proyecto de uno en uno. Le recomendamos que solo importe modelos de esos archivos. ¿Desea continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importar todos como modelos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Guardar proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrusor %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 y material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "No mostrar resumen de proyecto al guardar de nuevo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Guardar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir modelo seleccionado con %1"
-msgstr[1] "Imprimir modelos seleccionados con %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir archivo de proyecto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este es un archivo de proyecto Cura. ¿Le gustaría abrirlo como un proyecto o importar sus modelos?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Recordar mi selección"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como proyecto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Sin título"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Archivo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Le damos la bienvenida a Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Edición"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ver"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Empezar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "A&justes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vacío"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensiones"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ayúdenos a mejorar Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Pre&ferencias"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario, entre otros:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "A&yuda"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nuevo proyecto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Uso de material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "¿Está seguro de que desea iniciar un nuevo proyecto? Esto borrará la placa de impresión y cualquier ajuste no guardado."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de segmentos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Ajustes de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configuraciones"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Los datos recopilados por Ultimaker Cura no contendrán información personal."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Más información"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuración no se encuentra disponible porque %1 es un perfil desconocido. Visite %2 para descargar el perfil de materiales correcto."
+msgid "Add printer by IP address"
+msgstr "Agregar impresora por dirección IP"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Introduzca la dirección IP de su impresora."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Agregar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "Could not connect to device."
+msgstr "No se ha podido conectar al dispositivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Cargando configuraciones disponibles desde la impresora..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "¿No puede conectarse a la impresora Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Las configuraciones no se encuentran disponibles porque la impresora no está conectada."
+msgid "The printer at this address has not responded yet."
+msgstr "La impresora todavía no ha respondido en esta dirección."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Seleccionar configuración"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "No se puede agregar la impresora porque es desconocida o no aloja un grupo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Atrás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Conectar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configuraciones"
+msgid "Add a printer"
+msgstr "Agregar una impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Agregar una impresora en red"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impresora"
+msgid "Add a non-networked printer"
+msgstr "Agregar una impresora fuera de red"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Habilitado"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Add a Cloud printer"
+msgstr "Añadir una impresora a la nube"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilice pegamento con esta combinación de materiales para lograr una mejor adhesión."
+msgid "Waiting for Cloud response"
+msgstr "Esperando la respuesta de la nube"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir modelo seleccionado con:"
-msgstr[1] "Imprimir modelos seleccionados con:"
+msgid "No printers found in your account?"
+msgstr "¿No se han encontrado impresoras en su cuenta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar modelo seleccionado"
-msgstr[1] "Multiplicar modelos seleccionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Las siguientes impresoras de su cuenta se han añadido en Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Añadir impresora manualmente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de copias"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Guardar proyecto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar selección..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Omitir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Acuerdo de usuario"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impresoras de red habilitadas"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rechazar y cerrar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impresoras locales"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &reciente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "No se ha encontrado ninguna impresora en su red."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Impresora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Actualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Agregar impresora por IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir como extrusor activo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Añadir impresora a la nube"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Habilitar extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Solución de problemas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Deshabilitar extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor del perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nombre de la impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Asigne un nombre a su impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Última actualización: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Cuenta de Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Cerrar sesión"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Iniciar sesión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Comprobando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Cuenta sincronizada"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Se ha producido un error..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalar actualizaciones pendientes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Buscar actualizaciones de la cuenta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Ajustes visibles"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Mostrar Guía de resolución de problemas en línea"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Contraer todas las categorías"
+msgid "Toggle Full Screen"
+msgstr "Alternar pantalla completa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gestionar visibilidad de los ajustes..."
+msgid "Exit Full Screen"
+msgstr "Salir de modo de pantalla completa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "Des&hacer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Rehacer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Salir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posición de la cámara"
+msgid "3D View"
+msgstr "Vista en 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vista de cámara"
+msgid "Front View"
+msgstr "Vista frontal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectiva"
+msgid "Top View"
+msgstr "Vista superior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfica"
+msgid "Left Side View"
+msgstr "Vista del lado izquierdo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&laca de impresión"
+msgid "Right Side View"
+msgstr "Vista del lado derecho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "No está conectado a ninguna impresora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configurar Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "La impresora no acepta comandos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Agregar impresora..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "En mantenimiento. Compruebe la impresora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Adm&inistrar impresoras ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Se ha perdido la conexión con la impresora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Administrar materiales..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Imprimiendo..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Añadir más materiales de Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "En pausa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Actualizar perfil con ajustes o sobrescrituras actuales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Preparando..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Descartar cambios actuales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Retire la impresión"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Crear perfil a partir de ajustes o sobrescrituras actuales..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Administrar perfiles..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Mostrar &documentación en línea"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Informar de un &error"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Novedades"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Acerca de..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Eliminar modelo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ce&ntrar modelo en plataforma"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "A&grupar modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Desagrupar modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Co&mbinar modelos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Multiplicar modelo..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Seleccionar todos los modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Borrar placa de impresión"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Recargar todos los modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Organizar todos los modelos en todas las placas de impresión"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Organizar todos los modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Organizar selección"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Restablecer las posiciones de todos los modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Restablecer las transformaciones de todos los modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Abrir archivo(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nuevo proyecto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Mostrar carpeta de configuración"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar visibilidad de los ajustes..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marketplace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ajustes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Actual"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unidad"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Información"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar cambio de diámetro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "El nuevo diámetro del filamento está ajustado en %1 mm y no es compatible con el extrusor actual. ¿Desea continuar?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Cancelar impresión"
+msgid "Display Name"
+msgstr "Mostrar nombre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "¿Está seguro de que desea cancelar la impresión?"
+msgid "Material Type"
+msgstr "Tipo de material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Se imprime como soporte."
+msgid "Color"
+msgstr "Color"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Se han modificado otros modelos que se superponen con este modelo."
+msgid "Properties"
+msgstr "Propiedades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Se ha modificado la superposición del relleno con este modelo."
+msgid "Density"
+msgstr "Densidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "No se admiten superposiciones con este modelo."
+msgid "Diameter"
+msgstr "Diámetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 sobrescrito."
-msgstr[1] "%1 sobrescritos."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Coste del filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+msgid "Filament weight"
+msgstr "Peso del filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Longitud del filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Coste por metro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está vinculado a %1 y comparte alguna de sus propiedades."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desvincular material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Descripción"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Información sobre adherencia"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Crear"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Impresora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Confirmar eliminación"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "¿Seguro que desea eliminar %1? ¡Esta acción no se puede deshacer!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importar material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "No se pudo importar el material en <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "El material se ha importado correctamente en <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exportar material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Se ha producido un error al exportar el material a <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "El material se ha exportado correctamente a <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impresoras"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Cambiar nombre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfiles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Crear"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplicado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Crear perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Introduzca un nombre para este perfil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Cambiar nombre de perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Impresora: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Actualizar perfil con ajustes o sobrescrituras actuales"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Este perfil utiliza los ajustes predeterminados especificados por la impresora, por eso no aparece ningún ajuste o sobrescritura en la lista que se ve a continuación."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Los ajustes actuales coinciden con el perfil seleccionado."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Ajustes globales"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidad de los ajustes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Comprobar todo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "General"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfaz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moneda:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Tema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Tendrá que reiniciar la aplicación para que estos cambios tengan efecto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Segmentar automáticamente al cambiar los ajustes."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Segmentar automáticamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamiento de la ventanilla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Resaltar en rojo las áreas del modelo sin soporte. Sin soporte, estas áreas no se imprimirán correctamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mostrar voladizos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Resalta las superficies que faltan o son extrañas del modelo usando señales de advertencia. A las trayectorias de herramientas les faltarán a menudo partes de la geometría prevista."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Mostrar errores de modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Mueve la cámara de manera que el modelo se encuentre en el centro de la vista cuando se selecciona un modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrar cámara cuando se selecciona elemento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "¿Se debería invertir el comportamiento predeterminado del zoom de cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Invertir la dirección del zoom de la cámara."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "¿Debería moverse el zoom en la dirección del ratón?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Hacer zoom en la dirección del ratón no es compatible con la perspectiva ortográfica."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Hacer zoom en la dirección del ratón"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "¿Deben moverse los modelos en la plataforma de modo que no se crucen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Asegúrese de que los modelos están separados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "¿Deben moverse los modelos del área de impresión de modo que no toquen la placa de impresión?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Arrastrar modelos a la placa de impresión de forma automática"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Se muestra el mensaje de advertencia en el lector de GCode."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensaje de advertencia en el lector de GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "¿Debe forzarse el modo de compatibilidad de la capa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forzar modo de compatibilidad de la vista de capas (necesario reiniciar)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "¿Debería abrirse Cura en el lugar donde se cerró?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar la posición de la ventana al inicio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "¿Qué tipo de renderizado de cámara debería usarse?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderizado de cámara:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspectiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrir y guardar archivos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "¿Debería abrir los archivos del escritorio o las aplicaciones externas en la misma instancia de Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizar una sola instancia de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "¿Deben ajustarse los modelos al volumen de impresión si son demasiado grandes?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Escalar modelos de gran tamaño"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modelo puede mostrarse demasiado pequeño si su unidad son metros en lugar de milímetros, por ejemplo. ¿Deben escalarse estos modelos?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Escalar modelos demasiado pequeños"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "¿Se deberían seleccionar los modelos después de haberse cargado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Seleccionar modelos al abrirlos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "¿Debe añadirse automáticamente un prefijo basado en el nombre de la impresora al nombre del trabajo de impresión?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Agregar prefijo de la máquina al nombre del trabajo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "¿Mostrar un resumen al guardar un archivo de proyecto?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Mostrar un cuadro de diálogo de resumen al guardar el proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamiento predeterminado al abrir un archivo del proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamiento predeterminado al abrir un archivo del proyecto: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Preguntar siempre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Abrir siempre como un proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importar modelos siempre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Si ha realizado cambios en un perfil y, a continuación, ha cambiado a otro, aparecerá un cuadro de diálogo que le preguntará si desea guardar o descartar los cambios. También puede elegir el comportamiento predeterminado, así ese cuadro de diálogo no volverá a aparecer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfiles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamiento predeterminado para los valores modificados al cambiar a otro perfil: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Descartar siempre los ajustes modificados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Transferir siempre los ajustes modificados al nuevo perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "¿Debe Cura buscar actualizaciones cuando se abre el programa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Buscar actualizaciones al iniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "¿Deben enviarse datos anónimos sobre la impresión a Ultimaker? Tenga en cuenta que no se envían ni almacenan modelos, direcciones IP ni otra información de identificación personal."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar información (anónima) de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Más información"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Cambiar nombre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Crear"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impresora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Confirmar eliminación"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "¿Seguro que desea eliminar %1? ¡Esta acción no se puede deshacer!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar material"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "No se pudo importar el material en <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Ver tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "El material se ha importado correctamente en <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "No está conectado a ninguna impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "La impresora no acepta comandos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Se ha producido un error al exportar el material a <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "En mantenimiento. Compruebe la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "El material se ha exportado correctamente a <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Se ha perdido la conexión con la impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Información"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Imprimiendo..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar cambio de diámetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "En pausa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "El nuevo diámetro del filamento está ajustado en %1 mm y no es compatible con el extrusor actual. ¿Desea continuar?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Preparando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Mostrar nombre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Retire la impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de material"
+msgid "Abort Print"
+msgstr "Cancelar impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Color"
+msgid "Are you sure you want to abort the print?"
+msgstr "¿Está seguro de que desea cancelar la impresión?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Propiedades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Buscar ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidad"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor en todos los extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diámetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos los valores cambiados en todos los extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Coste del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ocultar este ajuste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "No mostrar este ajuste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Longitud del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Mostrar este ajuste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Coste por metro"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n"
+"\n"
+"Haga clic para mostrar estos ajustes."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está vinculado a %1 y comparte alguna de sus propiedades."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Este ajuste no se utiliza porque los ajustes a los que afecta están sobrescritos."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desvincular material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Afecta a"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Descripción"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Afectado por"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Información sobre adherencia"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Este ajuste siempre se comparte entre extrusores. Si lo modifica, modificará el valor de todos los extrusores."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ajustes de impresión"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Este valor se resuelve a partir de valores en conflicto específicos del extrusor:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Crear"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Este ajuste tiene un valor distinto del perfil.\n"
+"\n"
+"Haga clic para restaurar el valor del perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Crear perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Introduzca un nombre para este perfil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Cambiar nombre de perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impresora: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Actualizar perfil con ajustes o sobrescrituras actuales"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar cambios actuales"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Este perfil utiliza los ajustes predeterminados especificados por la impresora, por eso no aparece ningún ajuste o sobrescritura en la lista que se ve a continuación."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Los ajustes actuales coinciden con el perfil seleccionado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Ajustes globales"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ajustes"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n"
+"\n"
+"Haga clic para restaurar el valor calculado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vista en 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Actual"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vista frontal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidad"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vista superior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidad de los ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista del lado izquierdo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Comprobar todo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista del lado derecho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Temperatura objetivo del extremo caliente. El extremo caliente se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento del extremo caliente se desactivará."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Temperatura actual de este extremo caliente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Temperatura a la que se va a precalentar el extremo caliente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Precalentar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Caliente el extremo caliente antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que el extremo caliente se caliente para poder imprimir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Color del material en este extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Material en este extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Tobera insertada en este extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Placa de impresión"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Temperatura objetivo de la plataforma calentada. La plataforma se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento de la plataforma se desactivará."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Temperatura actual de la plataforma caliente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Temperatura a la que se va a precalentar la plataforma."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Caliente la plataforma antes de imprimir. Puede continuar ajustando la impresión durante el calentamiento, así no tendrá que esperar a que la plataforma se caliente para poder imprimir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Control de impresoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Posición de desplazamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distancia de desplazamiento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Enviar GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Envíe un comando de GCode personalizado a la impresora conectada. Pulse «Intro» para enviar el comando."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "La impresora no está conectada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "La impresora de la nube está sin conexión. Compruebe si la impresora está encendida y conectada a Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impresora no está vinculada a su cuenta. Vaya a Ultimaker Digital Factory para establecer una conexión."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La conexión de la nube no está disponible actualmente. Inicie sesión para conectarse a la impresora de la nube."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La conexión de la nube no está disponible actualmente. Compruebe la conexión a Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Agregar impresora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Administrar impresoras"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impresoras conectadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impresoras preconfiguradas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Activar impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Nombre del trabajo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tiempo de impresión"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tiempo restante estimado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n"
-"\n"
-"Haga clic para abrir el administrador de perfiles."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfiles personalizados"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "No hay ningún perfil %1 para configuración en %2 extrusor. En su lugar se utilizará la opción predeterminada"
-msgstr[1] "No hay ningún perfil %1 para configuraciones en %2 extrusores. En su lugar se utilizará la opción predeterminada"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuración de impresión deshabilitada. No se puede modificar el archivo GCode."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Encendido"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Apagado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimental"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Adherencia"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Habilita la impresión de un borde o una balsa. Esta opción agregará un área plana alrededor del objeto, que es fácil de cortar después."
+msgid "Is printed as support."
+msgstr "Se imprime como soporte."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Relleno gradual"
+msgid "Other models overlapping with this model are modified."
+msgstr "Se han modificado otros modelos que se superponen con este modelo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un relleno gradual aumentará gradualmente la cantidad de relleno hacia arriba."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Ha modificado algunos ajustes del perfil. Si desea cambiarlos, hágalo en el modo personalizado."
+msgid "Infill overlapping with this model is modified."
+msgstr "Se ha modificado la superposición del relleno con este modelo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Soporte"
+msgid "Overlaps with this model are not supported."
+msgstr "No se admiten superposiciones con este modelo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Generar estructuras para soportar piezas del modelo que tengan voladizos. Sin estas estructuras, estas piezas se romperían durante la impresión."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 sobrescrito."
+msgstr[1] "%1 sobrescritos."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n"
-"\n"
-"Haga clic para mostrar estos ajustes."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Este ajuste no se utiliza porque los ajustes a los que afecta están sobrescritos."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Edición"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Afecta a"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensiones"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Afectado por"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Pre&ferencias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Este ajuste siempre se comparte entre extrusores. Si lo modifica, modificará el valor de todos los extrusores."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "A&yuda"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Este valor se resuelve a partir de valores en conflicto específicos del extrusor:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nuevo proyecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Este ajuste tiene un valor distinto del perfil.\n"
-"\n"
-"Haga clic para restaurar el valor del perfil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "¿Está seguro de que desea iniciar un nuevo proyecto? Esto borrará la placa de impresión y cualquier ajuste no guardado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n"
-"\n"
-"Haga clic para restaurar el valor calculado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Buscar ajustes"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor en todos los extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos los valores cambiados en todos los extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ocultar este ajuste"
+msgid "This package will be installed after restarting."
+msgstr "Este paquete se instalará después de reiniciar."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "No mostrar este ajuste"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Mostrar este ajuste"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Cerrando %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vista en 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "¿Seguro que desea salir de %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vista frontal"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar paquete"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vista superior"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir archivo(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista del lado izquierdo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Hemos encontrado uno o más archivos de GCode entre los archivos que ha seleccionado. Solo puede abrir los archivos GCode de uno en uno. Si desea abrir un archivo GCode, seleccione solo uno."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista del lado derecho"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Agregar impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Ver tipo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novedades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Añadir una impresora a la nube"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "La impresora de la nube está sin conexión. Compruebe si la impresora está encendida y conectada a Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Esperando la respuesta de la nube"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impresora no está vinculada a su cuenta. Vaya a Ultimaker Digital Factory para establecer una conexión."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "¿No se han encontrado impresoras en su cuenta?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La conexión de la nube no está disponible actualmente. Inicie sesión para conectarse a la impresora de la nube."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Las siguientes impresoras de su cuenta se han añadido en Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La conexión de la nube no está disponible actualmente. Compruebe la conexión a Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Añadir impresora manualmente"
+msgid "Add printer"
+msgstr "Agregar impresora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Finalizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor del perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nombre de la impresora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Asigne un nombre a su impresora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Agregar una impresora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Agregar una impresora en red"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Agregar una impresora fuera de red"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "No se ha encontrado ninguna impresora en su red."
+msgid "Manage printers"
+msgstr "Administrar impresoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Actualizar"
+msgid "Connected printers"
+msgstr "Impresoras conectadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Agregar impresora por IP"
+msgid "Preset printers"
+msgstr "Impresoras preconfiguradas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Añadir impresora a la nube"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir modelo seleccionado con %1"
+msgstr[1] "Imprimir modelos seleccionados con %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Solución de problemas"
+msgid "Time estimation"
+msgstr "Estimación de tiempos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Agregar impresora por dirección IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Introduzca la dirección IP de su impresora."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Agregar"
+msgid "Material estimation"
+msgstr "Estimación de material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "No se ha podido conectar al dispositivo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "¿No puede conectarse a la impresora Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "La impresora todavía no ha respondido en esta dirección."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Segmentando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "No se puede agregar la impresora porque es desconocida o no aloja un grupo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "No se puede segmentar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Atrás"
+msgid "Processing"
+msgstr "Procesando"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Conectar"
+msgid "Slice"
+msgstr "Segmentación"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Cuenta de Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Su clave para una impresión 3D conectada"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personalice su experiencia con más perfiles de impresión y complementos"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Consiga más flexibilidad sincronizando su configuración y cargándola en cualquier lugar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Aumente la eficiencia con un flujo de trabajo remoto en las impresoras Ultimaker"
+msgid "Start the slicing process"
+msgstr "Iniciar el proceso de segmentación"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Omitir"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ayúdenos a mejorar Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Ningún cálculo de tiempo disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura recopila datos anónimos para mejorar la calidad de impresión y la experiencia de usuario, entre otros:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Ningún cálculo de costes disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Vista previa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Uso de material"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Proporciona asistencia para la conexión directa y la escritura de la unidad extraíble."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de segmentos"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Complemento de dispositivo de salida de unidad extraíble"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ajustes de impresión"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Actualiza la configuración de Cura 3.5 a Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Los datos recopilados por Ultimaker Cura no contendrán información personal."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Actualización de la versión 3.5 a la 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Más información"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Actualiza la configuración de Cura 4.6.2 a Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vacío"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Actualización de la versión 4.6.2 a la 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Acuerdo de usuario"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Actualiza la configuración de Cura 2.2 a Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rechazar y cerrar"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Actualización de la versión 2.2 a la 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Le damos la bienvenida a Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Actualiza la configuración de Cura 4.2 a Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Siga estos pasos para configurar\n"
-"Ultimaker Cura. Solo le llevará unos minutos."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Actualización de la versión 4.2 a la 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Empezar"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Actualiza la configuración de Cura 4.6.0 a Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Novedades en Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Actualización de la versión 4.6.0 a la 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Comprueba las configuraciones de los modelos y la impresión en busca de posibles problemas de impresión y da consejos."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Actualiza la configuración de Cura 3.0 a Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Comprobador de modelos"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Actualización de la versión 3.0 a la 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Proporciona asistencia para leer archivos 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Actualiza la configuración de Cura 4.0 a Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lector de 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Actualización de la versión 4.0 a la 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Proporciona asistencia para escribir archivos 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Actualiza la configuración de Cura 2.6 a Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Escritor de 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Actualización de la versión 2.6 a la 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Proporciona asistencia para leer archivos AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Actualiza la configuración de Cura 2.5 a Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lector de AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Actualización de la versión 2.5 a la 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Realice una copia de seguridad de su configuración y restáurela."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Actualiza la configuración de Cura 4.1 a Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Copias de seguridad de Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Actualización de la versión 4.1 a la 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Proporciona el vínculo para el backend de segmentación de CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Actualiza las configuraciones de Cura 2.1 a Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Backend de CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Actualización de la versión 2.1 a la 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Proporciona asistencia para la importación de perfiles de Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Actualiza la configuración de Cura 3.2 a Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lector de perfiles de Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Actualización de la versión 3.2 a la 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Proporciona asistencia para exportar perfiles de Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Actualiza la configuración de Cura 4.5 a Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Escritor de perfiles de Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Actualización de la versión 4.5 a la 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Busca actualizaciones de firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Actualiza la configuración de Cura 4.4 a Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Buscador de actualizaciones de firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Actualización de la versión 4.4 a la 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Proporciona opciones a la máquina para actualizar el firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Actualiza la configuración de Cura 4.7 a Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Actualizador de firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Actualización de la versión 4.7 a la 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Lee GCode de un archivo comprimido."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Actualiza la configuración de Cura 3.3 a Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lector de GCode comprimido"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Actualización de la versión 3.3 a la 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Escribe GCode en un archivo comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Actualiza la configuración de Cura 4.3 a Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Escritor de GCode comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Actualización de la versión 4.3 a la 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Proporciona asistencia para la importación de perfiles de archivos GCode."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Actualiza las configuraciones de Cura 3.4 a Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lector de perfiles GCode"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Actualización de la versión 3.4 a la 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite cargar y visualizar archivos GCode."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Actualiza la configuración de Cura 2.7 a Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lector de GCode"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Actualización de la versión 2.7 a la 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Escribe GCode en un archivo."
+msgid "Provides support for reading AMF files."
+msgstr "Proporciona asistencia para leer archivos AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Escritor de GCode"
+msgid "AMF Reader"
+msgstr "Lector de AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Habilita la capacidad de generar geometría imprimible a partir de archivos de imagen 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Proporciona asistencia para la importación de perfiles de archivos GCode."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lector de imágenes"
+msgid "G-code Profile Reader"
+msgstr "Lector de perfiles GCode"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Proporciona asistencia para la importación de perfiles de versiones anteriores de Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Proporciona opciones a la máquina para actualizar el firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lector de perfiles antiguos de Cura"
+msgid "Firmware Updater"
+msgstr "Actualizador de firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Permite cambiar los ajustes de la máquina (como el volumen de impresión, el tamaño de la tobera, etc.)."
+msgid "Provides support for reading X3D files."
+msgstr "Proporciona asistencia para leer archivos X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Acción Ajustes de la máquina"
+msgid "X3D Reader"
+msgstr "Lector de X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Proporciona una fase de supervisión en Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Buscar, administrar e instalar nuevos paquetes de Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase de supervisión"
+msgid "Toolbox"
+msgstr "Cuadro de herramientas"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5470,75 +5724,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Posprocesamiento"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Proporciona una fase de preparación en Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Proporciona el vínculo para el backend de segmentación de CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase de preparación"
+msgid "CuraEngine Backend"
+msgstr "Backend de CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Proporciona una fase de vista previa en Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Acepta GCode y lo envía a una impresora. El complemento también puede actualizar el firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase de vista previa"
+msgid "USB printing"
+msgstr "Impresión USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Proporciona asistencia para la conexión directa y la escritura de la unidad extraíble."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Proporciona asistencia para exportar perfiles de Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Complemento de dispositivo de salida de unidad extraíble"
+msgid "Cura Profile Writer"
+msgstr "Escritor de perfiles de Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra determinados eventos para que puedan utilizarse en el informe del accidente"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gestiona las conexiones de red de las impresoras Ultimaker conectadas."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Registro de Sentry"
+msgid "Ultimaker Network Connection"
+msgstr "Conexión en red de Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Abre la vista de simulación."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Proporciona las acciones de la máquina de las máquinas Ultimaker (como un asistente para la nivelación de la plataforma, la selección de actualizaciones, etc.)."
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vista de simulación"
+msgid "Ultimaker machine actions"
+msgstr "Acciones de la máquina Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envía información anónima de la segmentación. Se puede desactivar en las preferencias."
+msgid "Provides support for reading 3MF files."
+msgstr "Proporciona asistencia para leer archivos 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Info de la segmentación"
+msgid "3MF Reader"
+msgstr "Lector de 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Proporciona una vista de malla sólida normal."
+msgid "Writes g-code to a compressed archive."
+msgstr "Escribe GCode en un archivo comprimido."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Vista de sólidos"
+msgid "Compressed G-code Writer"
+msgstr "Escritor de GCode comprimido"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Lee GCode de un archivo comprimido."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lector de GCode comprimido"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Comprueba las configuraciones de los modelos y la impresión en busca de posibles problemas de impresión y da consejos."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Comprobador de modelos"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Busca actualizaciones de firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Buscador de actualizaciones de firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite cargar y visualizar archivos GCode."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Lector de GCode"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5550,16 +5844,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Borrador de soporte"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Buscar, administrar e instalar nuevos paquetes de Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Cuadro de herramientas"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5570,6 +5854,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Lector Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra determinados eventos para que puedan utilizarse en el informe del accidente"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Registro de Sentry"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5580,265 +5874,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Lector de UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permite la escritura de paquetes de formato Ultimaker."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Escritor de UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Proporciona las acciones de la máquina de las máquinas Ultimaker (como un asistente para la nivelación de la plataforma, la selección de actualizaciones, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Proporciona asistencia para la importación de perfiles de versiones anteriores de Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Acciones de la máquina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lector de perfiles antiguos de Cura"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gestiona las conexiones de red de las impresoras Ultimaker conectadas."
+msgid "Provides a prepare stage in Cura."
+msgstr "Proporciona una fase de preparación en Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Conexión en red de Ultimaker"
+msgid "Prepare Stage"
+msgstr "Fase de preparación"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Acepta GCode y lo envía a una impresora. El complemento también puede actualizar el firmware."
+msgid "Provides a monitor stage in Cura."
+msgstr "Proporciona una fase de supervisión en Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impresión USB"
+msgid "Monitor Stage"
+msgstr "Fase de supervisión"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Actualiza las configuraciones de Cura 2.1 a Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Proporciona la vista de rayos X."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Actualización de la versión 2.1 a la 2.2"
+msgid "X-Ray View"
+msgstr "Vista de rayos X"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Actualiza la configuración de Cura 2.2 a Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Proporciona asistencia para escribir archivos 3MF."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Actualización de la versión 2.2 a la 2.4"
+msgid "3MF Writer"
+msgstr "Escritor de 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Actualiza la configuración de Cura 2.5 a Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envía información anónima de la segmentación. Se puede desactivar en las preferencias."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Actualización de la versión 2.5 a la 2.6"
+msgid "Slice info"
+msgstr "Info de la segmentación"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Actualiza la configuración de Cura 2.6 a Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Proporciona una fase de vista previa en Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Actualización de la versión 2.6 a la 2.7"
+msgid "Preview Stage"
+msgstr "Fase de vista previa"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Actualiza la configuración de Cura 2.7 a Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Abre la vista de simulación."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Actualización de la versión 2.7 a la 3.0"
+msgid "Simulation View"
+msgstr "Vista de simulación"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Actualiza la configuración de Cura 3.0 a Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Permite cambiar los ajustes de la máquina (como el volumen de impresión, el tamaño de la tobera, etc.)."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Actualización de la versión 3.0 a la 3.1"
+msgid "Machine Settings Action"
+msgstr "Acción Ajustes de la máquina"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Actualiza la configuración de Cura 3.2 a Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Permite leer y escribir perfiles de material basados en XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Actualización de la versión 3.2 a la 3.3"
+msgid "Material Profiles"
+msgstr "Perfiles de material"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Actualiza la configuración de Cura 3.3 a Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Proporciona una vista de malla sólida normal."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Actualización de la versión 3.3 a la 3.4"
+msgid "Solid View"
+msgstr "Vista de sólidos"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Actualiza las configuraciones de Cura 3.4 a Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Proporciona asistencia para la importación de perfiles de Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Actualización de la versión 3.4 a la 3.5"
+msgid "Cura Profile Reader"
+msgstr "Lector de perfiles de Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Actualiza la configuración de Cura 3.5 a Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permite la escritura de paquetes de formato Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Actualización de la versión 3.5 a la 4.0"
+msgid "UFP Writer"
+msgstr "Escritor de UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Actualiza la configuración de Cura 4.0 a Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Escribe GCode en un archivo."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Actualización de la versión 4.0 a la 4.1"
+msgid "G-code Writer"
+msgstr "Escritor de GCode"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Actualiza la configuración de Cura 4.1 a Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Habilita la capacidad de generar geometría imprimible a partir de archivos de imagen 2D."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Actualización de la versión 4.1 a la 4.2"
+msgid "Image Reader"
+msgstr "Lector de imágenes"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Actualiza la configuración de Cura 4.2 a Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Realice una copia de seguridad de su configuración y restáurela."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Actualización de la versión 4.2 a la 4.3"
+msgid "Cura Backups"
+msgstr "Copias de seguridad de Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Actualiza la configuración de Cura 4.3 a Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Falta la pila global."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Actualización de la versión 4.3 a la 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Su modelo no es funcional. Las áreas resaltadas indican que faltan superficies o son extrañas."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Actualiza la configuración de Cura 4.4 a Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Errores de modelo"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Actualización de la versión 4.4 a la 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Grosor de la capa"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Actualiza la configuración de Cura 4.5 a Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Su clave para una impresión 3D conectada"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Actualización de la versión 4.5 a la 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personalice su experiencia con más perfiles de impresión y complementos\n"
+#~ "- Consiga más flexibilidad sincronizando su configuración y cargándola en cualquier lugar\n"
+#~ "- Aumente la eficiencia con un flujo de trabajo remoto en las impresoras Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Actualiza la configuración de Cura 4.6.0 a Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Crear cuenta"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Actualización de la versión 4.6.0 a la 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Eliminar modelo seleccionado"
+#~ msgstr[1] "Eliminar modelos seleccionados"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Actualiza la configuración de Cura 4.6.2 a Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centrar modelo seleccionado"
+#~ msgstr[1] "Centrar modelos seleccionados"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Actualización de la versión 4.6.2 a la 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Multiplicar modelo seleccionado"
+#~ msgstr[1] "Multiplicar modelos seleccionados"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Actualiza la configuración de Cura 4.7 a Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Finalizar"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Actualización de la versión 4.7 a la 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Cuenta de Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Proporciona asistencia para leer archivos X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Su clave para una impresión 3D conectada"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lector de X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personalice su experiencia con más perfiles de impresión y complementos"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Permite leer y escribir perfiles de material basados en XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Consiga más flexibilidad sincronizando su configuración y cargándola en cualquier lugar"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfiles de material"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Aumente la eficiencia con un flujo de trabajo remoto en las impresoras Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Proporciona la vista de rayos X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Siga estos pasos para configurar\n"
+#~ "Ultimaker Cura. Solo le llevará unos minutos."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista de rayos X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Novedades en Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/es_ES/fdmextruder.def.json.po b/resources/i18n/es_ES/fdmextruder.def.json.po
index 8f3cf70884..ada6f688e6 100644
--- a/resources/i18n/es_ES/fdmextruder.def.json.po
+++ b/resources/i18n/es_ES/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Spanish\n"
diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po
index 9dc4561d58..01e6395676 100644
--- a/resources/i18n/es_ES/fdmprinter.def.json.po
+++ b/resources/i18n/es_ES/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Spanish <info@lionbridge.com>, Spanish <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Si los extrusores comparten un único calentador en lugar de que cada extrusor tenga el suyo propio."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Áreas no permitidas"
@@ -486,8 +506,8 @@ msgstr "Desplazamiento con extrusor"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Aplicar el desplazamiento del extrusor al sistema de coordenadas."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Multiplicador del ancho de la línea de la primera capa. Si esta se aume
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Perímetro"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Distancia de un movimiento de desplazamiento insertado tras la pared exterior con el fin de ocultar mejor la costura sobre el eje Z."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extrusor de la superficie superior del forro"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "El tren extrusor que se utiliza para imprimir el nivel superior del forro. Se emplea en la extrusión múltiple."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Capas de la superficie superior del forro"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "El número de capas del nivel superior del forro. Normalmente es suficiente con una sola capa para generar superficies superiores con mayor calidad."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extrusor superior/inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "El tren extrusor que se utiliza para imprimir el forro superior e inferior. Se emplea en la extrusión múltiple."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Grosor superior/inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Grosor de las capas superiores/inferiores en la impresión. Este valor dividido por la altura de la capa define el número de capas superiores/inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Grosor superior"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Grosor de las capas superiores en la impresión. Este valor dividido por la altura de capa define el número de capas superiores."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Capas superiores"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Número de capas superiores. Al calcularlo por el grosor superior, este valor se redondea a un número entero."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Grosor inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Grosor de las capas inferiores en la impresión. Este valor dividido por la altura de capa define el número de capas inferiores."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Capas inferiores"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Número de capas inferiores. Al calcularlo por el grosor inferior, este valor se redondea a un número entero."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Capas inferiores iniciales"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "El número de capas inferiores iniciales, desde la capa de impresión hacia arriba. Al calcularlo por el grosor inferior, este valor se redondea a un número entero."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Patrón superior/inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Patrón de las capas superiores/inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Líneas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concéntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Patrón inferior de la capa inicial"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "El patrón que aparece en la parte inferior de la impresión de la primera capa."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Líneas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concéntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Conectar polígonos superiores/inferiores"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Conecta las trayectorias de forro superior/inferior cuando están próximas entre sí. Al habilitar este ajuste, en el patrón concéntrico se reduce considerablemente el tiempo de desplazamiento, pero las conexiones pueden producirse en mitad del relleno, con lo que bajaría la calidad de la superficie superior."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Direcciones de línea superior/inferior"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Una lista de los valores enteros de las direcciones de línea si las capas superiores e inferiores utilizan líneas o el patrón en zigzag. Los elementos de esta lista se utilizan de forma secuencial a medida que las capas se utilizan y, cuando se alcanza el final, la lista vuelve a comenzar desde el principio. Los elementos de la lista están separados por comas y toda la lista aparece entre corchetes. El valor predeterminado es una lista vacía que utiliza los ángulos predeterminados típicos (45 y 135 grados)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Entrante en la pared exterior"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Cuando se habilita, las coordenadas de la costura en z son relativas al centro de cada pieza. De lo contrario, las coordenadas definen una posición absoluta en la placa de impresión."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extrusor de la superficie superior del forro"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "El tren extrusor que se utiliza para imprimir el nivel superior del forro. Se emplea en la extrusión múltiple."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Capas de la superficie superior del forro"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "El número de capas del nivel superior del forro. Normalmente es suficiente con una sola capa para generar superficies superiores con mayor calidad."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extrusor superior/inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "El tren extrusor que se utiliza para imprimir el forro superior e inferior. Se emplea en la extrusión múltiple."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Grosor superior/inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Grosor de las capas superiores/inferiores en la impresión. Este valor dividido por la altura de la capa define el número de capas superiores/inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Grosor superior"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Grosor de las capas superiores en la impresión. Este valor dividido por la altura de capa define el número de capas superiores."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Capas superiores"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Número de capas superiores. Al calcularlo por el grosor superior, este valor se redondea a un número entero."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Grosor inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Grosor de las capas inferiores en la impresión. Este valor dividido por la altura de capa define el número de capas inferiores."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Capas inferiores"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Número de capas inferiores. Al calcularlo por el grosor inferior, este valor se redondea a un número entero."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Capas inferiores iniciales"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "El número de capas inferiores iniciales, desde la capa de impresión hacia arriba. Al calcularlo por el grosor inferior, este valor se redondea a un número entero."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Patrón superior/inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Patrón de las capas superiores/inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Líneas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concéntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Patrón inferior de la capa inicial"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "El patrón que aparece en la parte inferior de la impresión de la primera capa."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Líneas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concéntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Conectar polígonos superiores/inferiores"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Conecta las trayectorias de forro superior/inferior cuando están próximas entre sí. Al habilitar este ajuste, en el patrón concéntrico se reduce considerablemente el tiempo de desplazamiento, pero las conexiones pueden producirse en mitad del relleno, con lo que bajaría la calidad de la superficie superior."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Direcciones de línea superior/inferior"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Una lista de los valores enteros de las direcciones de línea si las capas superiores e inferiores utilizan líneas o el patrón en zigzag. Los elementos de esta lista se utilizan de forma secuencial a medida que las capas se utilizan y, cuando se alcanza el final, la lista vuelve a comenzar desde el principio. Los elementos de la lista están separados por comas y toda la lista aparece entre corchetes. El valor predeterminado es una lista vacía que utiliza los ángulos predeterminados típicos (45 y 135 grados)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Sin forro en huecos en Z"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Ajuste la cantidad de superposición entre las paredes y (los extremos de) las líneas centrales del forro. Una ligera superposición permite que las paredes estén firmemente unidas al forro. Tenga en cuenta que, con un mismo ancho de la línea del forro y la pared, cualquier valor superior a la mitad del ancho de la pared ya puede provocar que cualquier forro sobrepase la pared, debido a que en ese punto la posición de la tobera del extrusor del forro ya puede sobrepasar la mitad de la pared."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Anchura de retirada del forro"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Anchura máxima de las áreas de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior/inferior en las superficies inclinadas del modelo."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Anchura de retirada del forro superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Anchura máxima de las áreas superiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior en las superficies inclinadas del modelo."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Anchura de retirada del forro inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Anchura máxima de las áreas inferiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro inferior en las superficies inclinadas del modelo."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Distancia de expansión del forro"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "La distancia a la que los forros se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de las capas vecinas se adhieran mejor al forro. Los valores inferiores ahorran material."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Distancia de expansión del forro superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "La distancia a la que los forros superiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de la capa superior se adhieran mejor al forro. Los valores inferiores ahorran material."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Distancia de expansión del forro inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "La distancia a la que los forros inferiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que el forro se adhiera mejor a las paredes de la capa inferior. Los valores inferiores ahorran material."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Ángulo máximo de expansión del forro"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Anchura de expansión mínima del forro"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Las áreas de forro más estrechas que este valor no se expanden. Esto evita la expansión de las áreas de forro estrechas que se crean cuando la superficie del modelo tiene una inclinación casi vertical."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Relleno"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "El ángulo mínimo de los voladizos internos para los que se agrega relleno. A partir de un valor de 0 º todos los objetos estarán totalmente rellenos, a 90 º no se proporcionará ningún relleno."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Anchura de retirada del forro"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Anchura máxima de las áreas de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior/inferior en las superficies inclinadas del modelo."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Anchura de retirada del forro superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Anchura máxima de las áreas superiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior en las superficies inclinadas del modelo."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Anchura de retirada del forro inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Anchura máxima de las áreas inferiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro inferior en las superficies inclinadas del modelo."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Distancia de expansión del forro"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "La distancia a la que los forros se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de las capas vecinas se adhieran mejor al forro. Los valores inferiores ahorran material."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Distancia de expansión del forro superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "La distancia a la que los forros superiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de la capa superior se adhieran mejor al forro. Los valores inferiores ahorran material."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Distancia de expansión del forro inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "La distancia a la que los forros inferiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que el forro se adhiera mejor a las paredes de la capa inferior. Los valores inferiores ahorran material."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Ángulo máximo de expansión del forro"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Las superficies superiores e inferiores de un objeto con un ángulo mayor que este no expanden los forros superior e inferior. Esto evita la expansión de las áreas de forro estrechas que se crean cuando la superficie del modelo tiene una inclinación casi vertical. Un ángulo de 0º es horizontal, mientras que uno de 90º es vertical."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Anchura de expansión mínima del forro"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Las áreas de forro más estrechas que este valor no se expanden. Esto evita la expansión de las áreas de forro estrechas que se crean cuando la superficie del modelo tiene una inclinación casi vertical."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Espesor de soporte de los bordes del forro"
@@ -2560,8 +2590,8 @@ msgstr "Velocidad de capa inicial"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Velocidad de la capa inicial. Se recomienda un valor más bajo para mejorar la adherencia a la placa de impresión."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,10 +5104,8 @@ msgstr "Rango de procesamiento de la malla"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Determina la prioridad de esta malla al tener en cuenta varias mallas de relleno superpuestas. Las áreas en las que se superponen varias mallas de relleno"
-" tomarán la configuración de la malla con el rango más bajo. Una malla de relleno con un orden superior modificará el relleno de las mallas de relleno"
-" con un orden inferior y las mallas normales."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5425,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Ángulo máximo de los voladizos una vez que se han hecho imprimibles. Un valor de 0º hace que todos los voladizos sean reemplazados por una pieza del modelo conectada a la placa de impresión y un valor de 90º no cambiará el modelo."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Habilitar depósito por inercia"
@@ -6363,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformación que se aplicará al modelo cuando se cargue desde el archivo."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Aplicar el desplazamiento del extrusor al sistema de coordenadas."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Perímetro"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Las superficies superiores e inferiores de un objeto con un ángulo mayor que este no expanden los forros superior e inferior. Esto evita la expansión de las áreas de forro estrechas que se crean cuando la superficie del modelo tiene una inclinación casi vertical. Un ángulo de 0º es horizontal, mientras que uno de 90º es vertical."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Velocidad de la capa inicial. Se recomienda un valor más bajo para mejorar la adherencia a la placa de impresión."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Determina la prioridad de esta malla al tener en cuenta varias mallas de relleno superpuestas. Las áreas en las que se superponen varias mallas de relleno tomarán la configuración de la malla con el rango más bajo. Una malla de relleno con un orden superior modificará el relleno de las mallas de relleno con un orden inferior y las mallas normales."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "La temperatura utilizada para la placa de impresión caliente. Si el valor es 0, la temperatura de la plataforma no se ajustará."
diff --git a/resources/i18n/fdmextruder.def.json.pot b/resources/i18n/fdmextruder.def.json.pot
index 8205e867d3..7d41511e0b 100644
--- a/resources/i18n/fdmextruder.def.json.pot
+++ b/resources/i18n/fdmextruder.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index 6c65886f4d..e87da5b620 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Uranium json setting files\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE\n"
@@ -451,6 +451,37 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid ""
+"Whether the extruders share a single nozzle rather than each extruder having "
+"its own nozzle. When set to true, it is expected that the printer-start "
+"gcode script properly sets up all extruders in an initial retraction state "
+"that is known and mutually compatible (either zero or one filament not "
+"retracted); in that case the initial retraction status is described, per "
+"extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' "
+"parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid ""
+"How much the filament of each extruder is assumed to have been retracted "
+"from the shared nozzle tip at the completion of the printer-start gcode "
+"script; the value should be equal to or greater than the length of the "
+"common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr ""
@@ -521,7 +552,8 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
+msgid ""
+"Apply the extruder offset to the coordinate system. Affects all extruders."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -948,7 +980,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
+msgid "Walls"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1029,194 +1061,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid ""
-"The extruder train used for printing the top most skin. This is used in "
-"multi-extrusion."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid ""
-"The number of top most skin layers. Usually only one top most layer is "
-"sufficient to generate higher quality top surfaces."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid ""
-"The extruder train used for printing the top and bottom skin. This is used "
-"in multi-extrusion."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid ""
-"The thickness of the top/bottom layers in the print. This value divided by "
-"the layer height defines the number of top/bottom layers."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid ""
-"The thickness of the top layers in the print. This value divided by the "
-"layer height defines the number of top layers."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid ""
-"The number of top layers. When calculated by the top thickness, this value "
-"is rounded to a whole number."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid ""
-"The thickness of the bottom layers in the print. This value divided by the "
-"layer height defines the number of bottom layers."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid ""
-"The number of bottom layers. When calculated by the bottom thickness, this "
-"value is rounded to a whole number."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid ""
-"The number of initial bottom layers, from the build-plate upwards. When "
-"calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid ""
-"Connect top/bottom skin paths where they run next to each other. For the "
-"concentric pattern enabling this setting greatly reduces the travel time, "
-"but because the connections can happen midway over infill this feature can "
-"reduce the top surface quality."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid ""
-"A list of integer line directions to use when the top/bottom layers use the "
-"lines or zig zag pattern. Elements from the list are used sequentially as "
-"the layers progress and when the end of the list is reached, it starts at "
-"the beginning again. The list items are separated by commas and the whole "
-"list is contained in square brackets. Default is an empty list which means "
-"use the traditional default angles (45 and 135 degrees)."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr ""
@@ -1579,6 +1423,204 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid ""
+"The extruder train used for printing the top most skin. This is used in "
+"multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid ""
+"The number of top most skin layers. Usually only one top most layer is "
+"sufficient to generate higher quality top surfaces."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid ""
+"The extruder train used for printing the top and bottom skin. This is used "
+"in multi-extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid ""
+"The thickness of the top/bottom layers in the print. This value divided by "
+"the layer height defines the number of top/bottom layers."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid ""
+"The thickness of the top layers in the print. This value divided by the "
+"layer height defines the number of top layers."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid ""
+"The number of top layers. When calculated by the top thickness, this value "
+"is rounded to a whole number."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid ""
+"The thickness of the bottom layers in the print. This value divided by the "
+"layer height defines the number of bottom layers."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid ""
+"The number of bottom layers. When calculated by the bottom thickness, this "
+"value is rounded to a whole number."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid ""
+"The number of initial bottom layers, from the build-plate upwards. When "
+"calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid ""
+"Connect top/bottom skin paths where they run next to each other. For the "
+"concentric pattern enabling this setting greatly reduces the travel time, "
+"but because the connections can happen midway over infill this feature can "
+"reduce the top surface quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid ""
+"A list of integer line directions to use when the top/bottom layers use the "
+"lines or zig zag pattern. Elements from the list are used sequentially as "
+"the layers progress and when the end of the list is reached, it starts at "
+"the beginning again. The list items are separated by commas and the whole "
+"list is contained in square brackets. Default is an empty list which means "
+"use the traditional default angles (45 and 135 degrees)."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr ""
@@ -1752,6 +1794,118 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid ""
+"The largest width of skin areas which are to be removed. Every skin area "
+"smaller than this value will disappear. This can help in limiting the amount "
+"of time and material spent on printing top/bottom skin at slanted surfaces "
+"in the model."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid ""
+"The largest width of top skin areas which are to be removed. Every skin area "
+"smaller than this value will disappear. This can help in limiting the amount "
+"of time and material spent on printing top skin at slanted surfaces in the "
+"model."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid ""
+"The largest width of bottom skin areas which are to be removed. Every skin "
+"area smaller than this value will disappear. This can help in limiting the "
+"amount of time and material spent on printing bottom skin at slanted "
+"surfaces in the model."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid ""
+"The distance the skins are expanded into the infill. Higher values makes the "
+"skin attach better to the infill pattern and makes the walls on neighboring "
+"layers adhere better to the skin. Lower values save amount of material used."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid ""
+"The distance the top skins are expanded into the infill. Higher values makes "
+"the skin attach better to the infill pattern and makes the walls on the "
+"layer above adhere better to the skin. Lower values save amount of material "
+"used."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid ""
+"The distance the bottom skins are expanded into the infill. Higher values "
+"makes the skin attach better to the infill pattern and makes the skin adhere "
+"better to the walls on the layer below. Lower values save amount of material "
+"used."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid ""
+"Top and/or bottom surfaces of your object with an angle larger than this "
+"setting, won't have their top/bottom skin expanded. This avoids expanding "
+"the narrow skin areas that are created when the model surface has a near "
+"vertical slope. An angle of 0° is horizontal and will cause no skin to be "
+"expanded, while an angle of 90° is vertical and will cause all skin to be "
+"expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid ""
+"Skin areas narrower than this are not expanded. This avoids expanding the "
+"narrow skin areas that are created when the model surface has a slope close "
+"to the vertical."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr ""
@@ -2120,117 +2274,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid ""
-"The largest width of skin areas which are to be removed. Every skin area "
-"smaller than this value will disappear. This can help in limiting the amount "
-"of time and material spent on printing top/bottom skin at slanted surfaces "
-"in the model."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid ""
-"The largest width of top skin areas which are to be removed. Every skin area "
-"smaller than this value will disappear. This can help in limiting the amount "
-"of time and material spent on printing top skin at slanted surfaces in the "
-"model."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid ""
-"The largest width of bottom skin areas which are to be removed. Every skin "
-"area smaller than this value will disappear. This can help in limiting the "
-"amount of time and material spent on printing bottom skin at slanted "
-"surfaces in the model."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid ""
-"The distance the skins are expanded into the infill. Higher values makes the "
-"skin attach better to the infill pattern and makes the walls on neighboring "
-"layers adhere better to the skin. Lower values save amount of material used."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid ""
-"The distance the top skins are expanded into the infill. Higher values makes "
-"the skin attach better to the infill pattern and makes the walls on the "
-"layer above adhere better to the skin. Lower values save amount of material "
-"used."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid ""
-"The distance the bottom skins are expanded into the infill. Higher values "
-"makes the skin attach better to the infill pattern and makes the skin adhere "
-"better to the walls on the layer below. Lower values save amount of material "
-"used."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid ""
-"Top and/or bottom surfaces of your object with an angle larger than this "
-"setting, won't have their top/bottom skin expanded. This avoids expanding "
-"the narrow skin areas that are created when the model surface has a near "
-"vertical slope. An angle of 0° is horizontal, while an angle of 90° is "
-"vertical."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid ""
-"Skin areas narrower than this are not expanded. This avoids expanding the "
-"narrow skin areas that are created when the model surface has a slope close "
-"to the vertical."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr ""
@@ -2919,7 +2962,8 @@ msgstr ""
 msgctxt "speed_layer_0 description"
 msgid ""
 "The speed for the initial layer. A lower value is advised to improve "
-"adhesion to the build plate."
+"adhesion to the build plate. Does not affect the build plate adhesion "
+"structures themselves, like brim and raft."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5880,8 +5924,8 @@ msgctxt "infill_mesh_order description"
 msgid ""
 "Determines the priority of this mesh when considering multiple overlapping "
 "infill meshes. Areas where multiple infill meshes overlap will take on the "
-"settings of the mesh with the lowest rank. An infill mesh with a higher "
-"order will modify the infill of infill meshes with lower order and normal "
+"settings of the mesh with the highest rank. An infill mesh with a higher "
+"rank will modify the infill of infill meshes with lower rank and normal "
 "meshes."
 msgstr ""
 
@@ -6307,6 +6351,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid ""
+"The maximum area of a hole in the base of the model before it's removed by "
+"Make Overhang Printable.  Holes smaller than this will be retained.  A value "
+"of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr ""
diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po
index aa3178f13e..c4dcbb7a62 100644
--- a/resources/i18n/fi_FI/cura.po
+++ b/resources/i18n/fi_FI/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -15,175 +15,188 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Tuntematon"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Ladataan laitteita..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Asetetaan näkymää..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Ladataan käyttöliittymää..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Varoitus"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Virhe"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Mukautettu materiaali"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Mukautettu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Tuntematon"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Mukautetut profiilit"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Uusien paikkojen etsiminen kappaleille"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Etsitään paikkaa"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Paikkaa ei löydy"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Tulostustilavuus"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -193,32 +206,32 @@ msgid ""
 "                "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Kaatumisraportti"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -226,1116 +239,776 @@ msgid ""
 "        "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Ladataan laitteita..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
+msgctxt "@info:title"
+msgid "Login failed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Asetetaan näkymää..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Ladataan käyttöliittymää..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
+msgctxt "@message"
+msgid "Could not read response."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Vain yksi G-code-tiedosto voidaan ladata kerralla. Tiedoston {0} tuonti ohitettiin."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Varoitus"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Muita tiedostoja ei voida ladata, kun G-code latautuu. Tiedoston {0} tuonti ohitettiin."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Virhe"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Kappaleiden kertominen ja sijoittelu"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Sijoitetaan kappaletta"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
-msgctxt "@message"
-msgid "Could not read response."
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Tiedosto on jo olemassa"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Tiedosto <filename>{0}</filename> on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Suutin"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Profiilin vienti epäonnistui tiedostoon <filename>{0}</filename>: Kirjoitin-lisäosa ilmoitti virheestä."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profiili viety tiedostoon <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profiililla {0} on tuntematon tiedostotyyppi tai se on vioittunut."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Mukautettu profiili"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Profiilista puuttuu laatutyyppi."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Suutin"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Uusien paikkojen etsiminen kappaleille"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Etsitään paikkaa"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Settings updated"
+msgid "Can't Find Location"
+msgstr "Paikkaa ei löydy"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
-msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
+msgctxt "@action:button"
+msgid "Skip"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Lisää"
+msgid "Close"
+msgstr "Sulje"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Finish"
+msgid "Next"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
+msgid "Finish"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Ulkoseinämä"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Sisäseinämät"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Pintakalvo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Täyttö"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Tuen täyttö"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Tukiliittymä"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Tuki"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Helma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Siirtoliike"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Takaisinvedot"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Muu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr ""
+msgid "Add"
+msgstr "Lisää"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Sulje"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr ""
+msgid "Cancel"
+msgstr "Peruuta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-tiedosto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF-tiedosto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura-projektin 3MF-tiedosto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr ""
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen vuoksi, jotta koroke ei osuisi tulostettuihin malleihin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr ""
+msgid "Build Volume"
+msgstr "Tulostustilavuus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Viipalointi ei onnistu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgid "Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Käsitellään kerroksia"
+msgid "Multiplying and placing objects"
+msgstr "Kappaleiden kertominen ja sijoittelu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Tiedot"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-profiili"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Päivitystietoja ei löytynyt."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Uusi tulostimen %s laiteohjelmisto saatavilla"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
+msgid "Placing Objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "GCode-tiedosto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-coden jäsennys"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-coden tiedot"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G File -tiedosto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-kuva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-kuva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-kuva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-kuva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-kuva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 -profiilit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Laitteen asetukset"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Mallikohtaiset asetukset"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Määritä mallikohtaiset asetukset"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr ""
+msgid "Placing Object"
+msgstr "Sijoitetaan kappaletta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Tallenna siirrettävälle asemalle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Tallenna siirrettävälle asemalle {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Tallennetaan siirrettävälle asemalle <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Tallennetaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Ei voitu tallentaa tiedostoon <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Tiedosto tallennettu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Poista"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Poista siirrettävä asema {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Poista laite turvallisesti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Kohteen {0} poistaminen epäonnistui. Asema saattaa olla toisen ohjelman käytössä."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Siirrettävä asema"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "AMF File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "GCode-tiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Kerrosnäkymä"
+msgid "X3D File"
+msgstr "X3D-tiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+msgctxt "@button"
+msgid "Decline"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+msgctxt "@button"
+msgid "Agree"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Kiinteä näkymä"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
+msgstr "Lisäosan lisenssisopimus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+msgctxt "@button"
+msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
 msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
+msgid "Syncing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
 msgctxt "@info:title"
 msgid "Changes detected from your Ultimaker account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+msgctxt "@info:generic"
+msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "Syncing..."
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
-msgctxt "@button"
-msgid "Decline"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
-msgctxt "@button"
-msgid "Agree"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Mallikohtaiset asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
-msgctxt "@title:window"
-msgid "Plugin License Agreement"
-msgstr "Lisäosan lisenssisopimus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Määritä mallikohtaiset asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
-msgctxt "@button"
-msgid "Decline and remove from account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
-msgctxt "@info:generic"
-msgid "You need to quit and restart {} before changes have effect."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
-msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Viipalointi ei onnistu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Viipalointi ei onnistu nykyisten asetuksien ollessa voimassa. Seuraavissa asetuksissa on virheitä: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Viipalointi ei onnistu, koska esitäyttötorni tai esitäytön sijainti tai sijainnit eivät kelpaa."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:status"
+msgid "Processing Layers"
+msgstr "Käsitellään kerroksia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Tiedot"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Tasaa alusta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-tulostus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Valitse päivitykset"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Tulosta USB:n kautta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Tulosta USB:n kautta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Yhdistetty USB:n kautta"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
-msgctxt "@info:status"
-msgid "Connected via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-profiili"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Yhdistä verkon kautta"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1343,71 +1016,71 @@ msgid_plural "... and {0} others"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1419,2154 +1092,2483 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgid "tomorrow"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgid "Sending Print Job"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Tulosta verkon kautta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Tulosta verkon kautta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Yhdistä verkon kautta"
+msgid "Select upgrades"
+msgstr "Valitse päivitykset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Tasaa alusta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Suositeltu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-tulostus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Mukautettu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Tulosta USB:n kautta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Tulosta USB:n kautta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Yhdistetty USB:n kautta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-tiedosto"
+msgid "3MF File"
+msgstr "3MF-tiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Kerrosnäkymä"
+msgid "Compressed G-code File"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Avaa projekti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Päivitystietoja ei löytynyt."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Yhteenveto – Cura-projekti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Uusi tulostimen %s laiteohjelmisto saatavilla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Tulostimen asetukset"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G File -tiedosto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-coden jäsennys"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-coden tiedot"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Varmista, että G-code on tulostimelle ja sen tulostusasetuksille soveltuva, ennen kuin lähetät tiedoston siihen. G-coden esitys ei välttämättä ole tarkka."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Miten laitteen ristiriita pitäisi ratkaista?"
+msgid "Create a volume in which supports are not printed."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tyyppi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profiilin asetukset"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Miten profiilin ristiriita pitäisi ratkaista?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nimi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Ei profiilissa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 ohitus"
-msgstr[1] "%1 ohitusta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 -profiilit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Johdettu seuraavista"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 ohitus"
-msgstr[1] "%1, %2 ohitusta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materiaaliasetukset"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Kerrosnäkymä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Miten materiaalin ristiriita pitäisi ratkaista?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Asetusten näkyvyys"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF-tiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Tila"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura-projektin 3MF-tiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Näkyvät asetukset:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1/%2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Avaa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Kerrosnäkymä"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Laitteen asetukset"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Kiinteä näkymä"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-kuva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-kuva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG-kuva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP-kuva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-kuva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Laiteohjelmisto on suoraan 3D-tulostimessa toimiva ohjelma. Laiteohjelmisto ohjaa askelmoottoreita, säätää lämpötilaa ja saa tulostimen toimimaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Uusien tulostimien mukana toimitettava laiteohjelmisto toimii, mutta uusissa versioissa on yleensä enemmän toimintoja ja parannuksia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Päivitä laiteohjelmisto automaattisesti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Lataa mukautettu laiteohjelmisto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Valitse mukautettu laiteohjelmisto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Laiteohjelmiston päivitys"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Päivitetään laiteohjelmistoa."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Laiteohjelmiston päivitys suoritettu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tuntemattoman virheen takia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tietoliikennevirheen takia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Laiteohjelmiston päivitys epäonnistui tiedoston lukemiseen tai kirjoittamiseen liittyvän virheen takia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Laiteohjelmiston päivitys epäonnistui puuttuvan laiteohjelmiston takia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Muunna kuva..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Korkeus (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Pohjan korkeus alustasta millimetreinä."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Pohja (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Leveys millimetreinä alustalla."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Leveys (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Syvyys millimetreinä alustalla"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Syvyys (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Tummempi on korkeampi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Vaaleampi on korkeampi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Kuvassa käytettävän tasoituksen määrä."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Tasoitus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Merkki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Tulostin"
+msgid "Installed plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Suuttimen koko"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Suuttimen X-siirtymä"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Suuttimen Y-siirtymä"
+msgid "Website"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
+msgid "Email"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (leveys)"
+msgid "Compatibility"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (syvyys)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (korkeus)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Alustan muoto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X väh."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y väh."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiaalit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X enint."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y enint."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
+msgid "Will install upon restarting"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Suulakkeiden määrä"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Asennettu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
+msgid "You will need to restart Cura before changes in packages have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Valitse asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Valitse tätä mallia varten mukautettavat asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Suodatin..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Näytä kaikki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Jälkikäsittelylisäosa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Jälkikäsittelykomentosarjat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Lisää komentosarja"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Värimalli"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materiaalin väri"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Linjojen tyyppi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Yhteensopivuustila"
+msgid "Queued"
+msgstr "Jonossa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Helpers"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Shell"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Täyttö"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Näytä vain yläkerrokset"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Näytä 5 yksityiskohtaista kerrosta ylhäällä"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Yläosa/alaosa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Sisäseinämä"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
-msgctxt "@label"
-msgid "min"
+msgid "Total print time"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
+msgid "Waiting for"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
+msgid "Configuration Changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Compatibility"
+msgid "Load %3 as material %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+msgctxt "@label"
+msgid "Change build plate to %1 (This cannot be overridden)."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+msgctxt "@label"
+msgid "Unavailable printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+msgctxt "@label"
+msgid "First available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Asennettu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
+msgstr "Yhdistä verkkotulostimeen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+msgctxt "@label"
+msgid "Select your printer from the list below:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
-msgid "Update"
-msgstr ""
+msgid "Edit"
+msgstr "Muokkaa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
-msgid "Updating"
-msgstr ""
+msgid "Remove"
+msgstr "Poista"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
-msgid "Updated"
-msgstr ""
+msgid "Refresh"
+msgstr "Päivitä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
-msgid "Premium"
-msgstr ""
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "Jos tulostinta ei ole luettelossa, lue <a href='%1'>verkkotulostuksen vianetsintäopas</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+msgctxt "@label"
+msgid "Type"
+msgstr "Tyyppi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
-msgid "Search materials"
-msgstr ""
+msgid "Firmware version"
+msgstr "Laiteohjelmistoversio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+msgctxt "@label"
+msgid "Address"
+msgstr "Osoite"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+msgctxt "@label"
+msgid "This printer is not set up to host a group of printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiaalit"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "Tämän osoitteen tulostin ei ole vielä vastannut."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+msgctxt "@action:button"
+msgid "Connect"
+msgstr "Yhdistä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+msgctxt "@title:window"
+msgid "Invalid IP address"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+msgctxt "@text"
+msgid "Please enter a valid IP address."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "Tulostimen osoite"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr ""
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Tulosta verkon kautta"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
 msgctxt "@action:button"
-msgid "Install"
-msgstr ""
+msgid "Print"
+msgstr "Tulosta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+msgctxt "@label"
+msgid "Printer selection"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+msgctxt "@label"
+msgid "Delete"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
-msgid "The following packages will be added:"
+msgid "Resume"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+msgctxt "@label"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
+msgctxt "@label"
+msgid "Pause"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+msgctxt "@window:title"
+msgid "Move print job to top"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
-msgctxt "@label"
-msgid "Email"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+msgctxt "@window:title"
+msgid "Delete print job"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "Keskeytä tulostus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Merkki"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Valmis"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
-msgctxt "@label"
-msgid "Generic Materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Vaatii toimenpiteitä"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+msgctxt "@label:status"
+msgid "Loading..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+msgctxt "@label:status"
+msgid "Unavailable"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Unreachable"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+msgctxt "@label:status"
+msgid "Idle"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
+msgctxt "@label:status"
+msgid "Printing"
+msgstr "Tulostetaan"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
+msgctxt "@label"
+msgid "Untitled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
+msgctxt "@label"
+msgid "Anonymous"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
+msgctxt "@label:status"
+msgid "Requires configuration changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
+msgctxt "@action:button"
+msgid "Details"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+msgctxt "@label"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Valitse tähän Ultimaker Original -laitteeseen tehdyt päivitykset"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+msgctxt "@label"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
 msgctxt "@title"
 msgid "Build Plate Leveling"
 msgstr "Alustan tasaaminen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
 msgctxt "@label"
 msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
 msgstr "Voit säätää alustaa, jotta tulosteista tulisi hyviä. Kun napsautat \"Siirry seuraavaan positioon\", suutin siirtyy eri positioihin, joita voidaan säätää."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
 msgctxt "@label"
 msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
 msgstr "Laita paperinpala kussakin positiossa suuttimen alle ja säädä tulostusalustan korkeus. Tulostusalustan korkeus on oikea, kun suuttimen kärki juuri ja juuri osuu paperiin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
 msgctxt "@action:button"
 msgid "Start Build Plate Leveling"
 msgstr "Aloita alustan tasaaminen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
 msgctxt "@action:button"
 msgid "Move to Next Position"
 msgstr "Siirry seuraavaan positioon"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Valitse tähän Ultimaker Original -laitteeseen tehdyt päivitykset"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Lämmitettävä alusta (virallinen sarja tai itse rakennettu)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
 msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "Yhdistä verkkotulostimeen"
+msgid "Open Project"
+msgstr "Avaa projekti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
-msgctxt "@label"
-msgid "Select your printer from the list below:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "Muokkaa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "Poista"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Yhteenveto – Cura-projekti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "Päivitä"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Tulostimen asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
-msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "Jos tulostinta ei ole luettelossa, lue <a href='%1'>verkkotulostuksen vianetsintäopas</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Miten laitteen ristiriita pitäisi ratkaista?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
 msgid "Type"
 msgstr "Tyyppi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
-msgctxt "@label"
-msgid "Firmware version"
-msgstr "Laiteohjelmistoversio"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
-msgctxt "@label"
-msgid "Address"
-msgstr "Osoite"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profiilin asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
-msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Miten profiilin ristiriita pitäisi ratkaista?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
-msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nimi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "Tämän osoitteen tulostin ei ole vielä vastannut."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Ei profiilissa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 ohitus"
+msgstr[1] "%1 ohitusta"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Johdettu seuraavista"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 ohitus"
+msgstr[1] "%1, %2 ohitusta"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materiaaliasetukset"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Miten materiaalin ristiriita pitäisi ratkaista?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Asetusten näkyvyys"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Tila"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Näkyvät asetukset:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1/%2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
 msgctxt "@action:button"
-msgid "Connect"
-msgstr "Yhdistä"
+msgid "Open"
+msgstr "Avaa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
-msgctxt "@title:window"
-msgid "Invalid IP address"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
-msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "Tulostimen osoite"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
 msgctxt "@title:window"
-msgid "Configuration Changes"
+msgid "More information on anonymous data collection"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-msgctxt "@action:button"
-msgid "Override"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
+msgid "Color scheme"
+msgstr "Värimalli"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materiaalin väri"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Linjojen tyyppi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr ""
+msgid "Compatibility Mode"
+msgstr "Yhteensopivuustila"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgid "Travels"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Glass"
+msgid "Helpers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Aluminum"
+msgid "Shell"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
-msgid "Move to top"
-msgstr ""
+msgid "Infill"
+msgstr "Täyttö"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
 msgctxt "@label"
-msgid "Delete"
+msgid "Starts"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Resume"
-msgstr ""
+msgid "Only Show Top Layers"
+msgstr "Näytä vain yläkerrokset"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
 msgctxt "@label"
-msgid "Pausing..."
-msgstr ""
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Näytä 5 yksityiskohtaista kerrosta ylhäällä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Resuming..."
-msgstr ""
+msgid "Top / Bottom"
+msgstr "Yläosa/alaosa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
 msgctxt "@label"
-msgid "Pause"
-msgstr ""
+msgid "Inner Wall"
+msgstr "Sisäseinämä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
 msgctxt "@label"
-msgid "Aborting..."
+msgid "min"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Abort"
+msgid "max"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
-msgctxt "@window:title"
-msgid "Move print job to top"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
+msgctxt "@label"
+msgid "Nozzle size"
+msgstr "Suuttimen koko"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+msgctxt "@label"
+msgid "mm"
+msgstr "mm"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Suuttimen X-siirtymä"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Suuttimen Y-siirtymä"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
-msgctxt "@window:title"
-msgid "Delete print job"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "Keskeytä tulostus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Tulostin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+msgctxt "@label"
+msgid "X (Width)"
+msgstr "X (leveys)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
+msgstr "Y (syvyys)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (korkeus)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+msgctxt "@label"
+msgid "Build plate shape"
+msgstr "Alustan muoto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
-msgctxt "@label:status"
-msgid "Loading..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
-msgctxt "@label:status"
-msgid "Unavailable"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Unreachable"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
-msgctxt "@label:status"
-msgid "Idle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
-msgctxt "@label:status"
-msgid "Printing"
-msgstr "Tulostetaan"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X väh."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
 msgctxt "@label"
-msgid "Untitled"
-msgstr ""
+msgid "Y min"
+msgstr "Y väh."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
 msgctxt "@label"
-msgid "Anonymous"
-msgstr ""
+msgid "X max"
+msgstr "X enint."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y enint."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
-msgctxt "@action:button"
-msgid "Details"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr ""
+msgid "Number of Extruders"
+msgstr "Suulakkeiden määrä"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
 msgctxt "@label"
-msgid "First available"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Valmis"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Muunna kuva..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Kunkin pikselin suurin etäisyys \"Pohja\"-arvosta."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Korkeus (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Pohjan korkeus alustasta millimetreinä."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Pohja (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Leveys millimetreinä alustalla."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Leveys (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Syvyys millimetreinä alustalla"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Syvyys (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Tummempi on korkeampi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Vaaleampi on korkeampi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Vaatii toimenpiteitä"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Kuvassa käytettävän tasoituksen määrä."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Tasoitus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
-msgctxt "@label"
-msgid "Queued"
-msgstr "Jonossa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
-msgctxt "@label"
-msgid "Print jobs"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
-msgctxt "@label"
-msgid "Total print time"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
-msgctxt "@label"
-msgid "Waiting for"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Tulosta verkon kautta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Tulosta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
-msgctxt "@label"
-msgid "Printer selection"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
-msgctxt "@label"
-msgid "Your key to connected 3D printing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Create account"
+msgid "Restore"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
-msgctxt "@label"
-msgid "Checking..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
-msgctxt "@label"
-msgid "Account synced"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
-msgctxt "@label"
-msgid "Something went wrong..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Tie&dosto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Avaa &viimeisin"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
 msgctxt "@label"
-msgid "Time estimation"
+msgid "Select configuration"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
 msgctxt "@label"
-msgid "Material estimation"
+msgid "Configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Viipaloidaan..."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Slice"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiaali"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
 msgctxt "@label"
-msgid "Start the slicing process"
+msgid "Use glue for better adhesion with this material combination."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Vaihda koko näyttöön"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Kumoa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "Tee &uudelleen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Lopeta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Näytä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
+msgid "&Camera position"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
+msgid "Camera view"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
+msgid "Perspective"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
+msgid "Orthographic"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
+msgid "&Build plate"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Määritä Curan asetukset..."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "L&isää tulostin..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Tulostinten &hallinta..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Hallitse materiaaleja..."
+msgid "Visible Settings"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Hylkää tehdyt muutokset"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profiilien hallinta..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Tulostin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Näytä sähköinen &dokumentaatio"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiaali"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Ilmoita &virheestä"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Aseta aktiiviseksi suulakepuristimeksi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Tietoja..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Poista valittu malli"
-msgstr[1] "Poista valitut mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Keskitä valittu malli"
-msgstr[1] "Keskitä valitut mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Tulosta valittu malli asetuksella:"
+msgstr[1] "Tulosta valitut mallit asetuksella:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Kerro valittu malli"
 msgstr[1] "Kerro valitut mallit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Poista malli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Kopioiden määrä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ke&skitä malli alustalle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Ryhmittele mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Poista mallien ryhmitys"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Hylkää tehdyt muutokset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Yhdistä mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Kerro malli..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n"
+"\n"
+"Avaa profiilin hallinta napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Valitse kaikki mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Tyhjennä tulostusalusta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Lataa kaikki mallit uudelleen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Järjestä kaikki mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Järjestä valinta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Tulostusasetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Määritä kaikkien mallien positiot uudelleen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Määritä kaikkien mallien muutokset uudelleen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Avaa tiedosto(t)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Asteittainen täyttö lisää täytön tiheyttä vähitellen yläosaa kohti."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Uusi projekti..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Näytä määrityskansio"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Määritä asetusten näkyvyys..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+msgctxt "@label"
+msgid "Adhesion"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
 msgctxt "@label"
-msgid "This package will be installed after restarting."
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Yleiset"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktiivinen tulostustyö"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Asetukset"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Työn nimi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Tulostimet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tulostusaika"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profiilit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Aikaa jäljellä arviolta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+msgctxt "@title:window"
+msgid "Discard or Keep changes"
+msgstr "Hylkää tai säilytä muutokset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Avaa tiedosto(t)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profiilin asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Avaa tiedosto(t)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Kysy aina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Hylkää äläkä kysy uudelleen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Lisää tulostin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Säilytä äläkä kysy uudelleen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kokonaisvaltainen sulatettavan tulostuslangan 3D-tulostusratkaisu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3575,1926 +3577,2062 @@ msgstr ""
 "Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\n"
 "Cura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Graafinen käyttöliittymä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Sovelluskehys"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Prosessien välinen tietoliikennekirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Ohjelmointikieli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-kehys"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI-kehyksen sidonnat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ -sidontakirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Data Interchange Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Tieteellisen laskennan tukikirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Nopeamman laskennan tukikirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL-tiedostojen käsittelyn tukikirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Tukikirjasto 3MF-tiedostojen käsittelyyn"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Sarjatietoliikennekirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf-etsintäkirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Monikulmion leikkauskirjasto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Fontti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-kuvakkeet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Avaa tiedosto(t)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
+msgctxt "@action:button"
+msgid "Import all as models"
+msgstr "Tuo kaikki malleina"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+msgctxt "@title:window"
+msgid "Save Project"
+msgstr "Tallenna projekti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Suulake %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & materiaali"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+msgctxt "@action:label"
+msgid "Material"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Tallenna"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
 msgctxt "@title:window"
 msgid "Open project file"
 msgstr "Avaa projektitiedosto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
 msgctxt "@text:window"
 msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
 msgstr "Tämä on Cura-projektitiedosto. Haluatko avata sen projektina vai tuoda siinä olevat mallit?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
 msgctxt "@text:window"
 msgid "Remember my choice"
 msgstr "Muista valintani"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
 msgctxt "@action:button"
 msgid "Open as project"
 msgstr "Avaa projektina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
 msgctxt "@action:button"
 msgid "Import models"
 msgstr "Tuo mallit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Hylkää tai säilytä muutokset"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
+msgctxt "@text Print job name"
+msgid "Untitled"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profiilin asetukset"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Kysy aina"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Hylkää äläkä kysy uudelleen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Säilytä äläkä kysy uudelleen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Löysimme vähintään yhden projektitiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden projektitiedoston kerrallaan. Suosittelemme, että tuot vain malleja niistä tiedostoista. Haluatko jatkaa?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Tuo kaikki malleina"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Tallenna projekti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Suulake %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & materiaali"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
-msgctxt "@action:label"
-msgid "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Älä näytä projektin yhteenvetoa tallennettaessa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Tallenna"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Tulosta valittu malli asetuksella %1"
-msgstr[1] "Tulosta valitut mallit asetuksella %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
-msgctxt "@text Print job name"
-msgid "Untitled"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Tie&dosto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Muokkaa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+msgctxt "@label"
+msgid "Could not connect to device."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Näytä"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Laa&jennukset"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+msgctxt "@label"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "L&isäasetukset"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Ohje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Uusi projekti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
+msgctxt "@label"
+msgid "Add a non-networked printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
+msgctxt "@label"
+msgid "What's New"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgid "Add a Cloud printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Marketplace"
+msgid "Waiting for Cloud response"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
+msgid "No printers found in your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
+msgid "The following printers in your account have been added in Cura:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Select configuration"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
 msgctxt "@label"
-msgid "Configurations"
+msgid "User Agreement"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
 msgctxt "@label"
-msgid "Printer"
+msgid "Release Notes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
 msgctxt "@label"
-msgid "Enabled"
+msgid "There is no printer found over your network."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiaali"
+msgid "Refresh"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
+msgid "Add printer by IP"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Tulosta valittu malli asetuksella:"
-msgstr[1] "Tulosta valitut mallit asetuksella:"
+msgid "Add cloud printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Kerro valittu malli"
-msgstr[1] "Kerro valitut mallit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Kopioiden määrä"
+msgid "Manufacturer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Avaa &viimeisin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Tulostin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiaali"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Aseta aktiiviseksi suulakepuristimeksi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
-msgctxt "@action:inmenu"
-msgid "Visible Settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
+msgid "Show Online Troubleshooting Guide"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
+msgid "Toggle Full Screen"
+msgstr "Vaihda koko näyttöön"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
+msgctxt "@action:inmenu"
+msgid "Exit Full Screen"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Kumoa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "Tee &uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Lopeta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
+msgid "3D View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
+msgid "Front View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
+msgid "Top View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
+msgid "Left Side View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
+msgid "Right Side View"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Ei yhteyttä tulostimeen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Määritä Curan asetukset..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Tulostin ei hyväksy komentoja"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "L&isää tulostin..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Huolletaan. Tarkista tulostin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Tulostinten &hallinta..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Yhteys tulostimeen menetetty"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Hallitse materiaaleja..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Tulostetaan..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Keskeytetty"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Päivitä nykyiset asetukset tai ohitukset profiiliin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Valmistellaan..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Hylkää tehdyt muutokset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Poista tuloste"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Luo profiili nykyisten asetusten tai ohitusten perusteella..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
-msgctxt "@label"
-msgid "Abort Print"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profiilien hallinta..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Näytä sähköinen &dokumentaatio"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Ilmoita &virheestä"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Tietoja..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Poista malli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ke&skitä malli alustalle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Ryhmittele mallit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Poista mallien ryhmitys"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Yhdistä mallit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Kerro malli..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Valitse kaikki mallit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Tyhjennä tulostusalusta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Lataa kaikki mallit uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Järjestä kaikki mallit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Järjestä valinta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Määritä kaikkien mallien positiot uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Määritä kaikkien mallien muutokset uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Avaa tiedosto(t)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Uusi projekti..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Näytä määrityskansio"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Määritä asetusten näkyvyys..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Laskettu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Asetus"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profiili"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Nykyinen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Yksikkö"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Tiedot"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Haluatko varmasti keskeyttää tulostuksen?"
+msgid "Display Name"
+msgstr "Näytä nimi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr ""
+msgid "Material Type"
+msgstr "Materiaalin tyyppi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr ""
+msgid "Color"
+msgstr "Väri"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr ""
+msgid "Properties"
+msgstr "Ominaisuudet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+msgid "Density"
+msgstr "Tiheys"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
+msgctxt "@label"
+msgid "Diameter"
+msgstr "Läpimitta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Tulostuslangan hinta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
+msgctxt "@label"
+msgid "Filament weight"
+msgstr "Tulostuslangan paino"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Tulostuslangan pituus"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Hinta metriä kohden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Poista materiaalin linkitys"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Kuvaus"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Tarttuvuustiedot"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivoi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Luo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Jäljennös"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Tuo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Vie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Tuo materiaali"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Vie materiaali"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Tulostimet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Nimeä uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profiilit"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
 msgctxt "@label"
-msgid "Object list"
+msgid "Create"
+msgstr "Luo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Jäljennös"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Luo profiili"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Monista profiili"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Nimeä profiili uudelleen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profiilin tuonti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profiilin vienti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Tulostin: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Päivitä nykyiset asetukset tai ohitukset profiiliin"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Nykyiset asetukset vastaavat valittua profiilia."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Yleiset asetukset"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Näkyvyyden asettaminen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Tarkista kaikki"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Yleiset"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Käyttöliittymä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuutta:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Teema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Sovellus on käynnistettävä uudelleen, jotta nämä muutokset tulevat voimaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Viipaloi automaattisesti, kun asetuksia muutetaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Viipaloi automaattisesti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Näyttöikkunan käyttäytyminen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Korosta mallin vailla tukea olevat alueet punaisella. Ilman tukea nämä alueet eivät tulostu kunnolla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Näytä uloke"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Siirtää kameraa siten, että valittuna oleva malli on näkymän keskellä."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Keskitä kamera kun kohde on valittu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Pitääkö Curan oletusarvoinen zoom-toimintatapa muuttaa päinvastaiseksi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Käännä kameran zoomin suunta päinvastaiseksi."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Tuleeko zoomauksen siirtyä hiiren suuntaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomaa hiiren suuntaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Pitäisikö alustalla olevia malleja siirtää niin, etteivät ne enää leikkaa toisiaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Varmista, että mallit ovat erillään"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Pitäisikö tulostusalueella olevia malleja siirtää alas niin, että ne koskettavat tulostusalustaa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Pudota mallit automaattisesti alustalle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Pakotetaanko kerros yhteensopivuustilaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Pakota kerrosnäkymän yhteensopivuustila (vaatii uudelleenkäynnistyksen)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Tiedostojen avaaminen ja tallentaminen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Pitäisikö mallit skaalata tulostustilavuuteen, jos ne ovat liian isoja?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Skaalaa suuret mallit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Malli voi vaikuttaa erittäin pieneltä, jos sen koko on ilmoitettu esimerkiksi metreissä eikä millimetreissä. Pitäisikö nämä mallit suurentaa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Skaalaa erittäin pienet mallit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Pitäisikö tulostustyön nimeen lisätä automaattisesti tulostimen nimeen perustuva etuliite?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Lisää laitteen etuliite työn nimeen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Näytetäänkö yhteenveto, kun projektitiedosto tallennetaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Näytä yhteenvetoikkuna, kun projekti tallennetaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Projektitiedoston avaamisen oletustoimintatapa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Projektitiedoston avaamisen oletustoimintatapa: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Avaa aina projektina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Tuo mallit aina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Kun olet tehnyt muutokset profiiliin ja vaihtanut toiseen, näytetään valintaikkuna, jossa kysytään, haluatko säilyttää vai hylätä muutokset. Tässä voit myös valita oletuskäytöksen, jolloin valintaikkunaa ei näytetä uudelleen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Tietosuoja"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Pitäisikö Curan tarkistaa saatavilla olevat päivitykset, kun ohjelma käynnistetään?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Tarkista päivitykset käynnistettäessä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Pitäisikö anonyymejä tietoja tulosteesta lähettää Ultimakerille? Huomaa, että malleja, IP-osoitteita tai muita henkilökohtaisia tietoja ei lähetetä eikä tallenneta."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Lähetä (anonyymit) tulostustiedot"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivoi"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Nimeä uudelleen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Luo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Jäljennös"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Tuo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Vie"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Tuo materiaali"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Materiaalin tuominen epäonnistui: <filename>%1</filename>: <message>%2</message>"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiaalin tuominen onnistui: <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Ei yhteyttä tulostimeen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Vie materiaali"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Tulostin ei hyväksy komentoja"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Materiaalin vieminen epäonnistui kohteeseen <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Huolletaan. Tarkista tulostin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiaalin vieminen onnistui kohteeseen <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Yhteys tulostimeen menetetty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Tiedot"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Tulostetaan..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Keskeytetty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Valmistellaan..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Näytä nimi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Poista tuloste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Materiaalin tyyppi"
+msgid "Abort Print"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Väri"
+msgid "Are you sure you want to abort the print?"
+msgstr "Haluatko varmasti keskeyttää tulostuksen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Ominaisuudet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Tiheys"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Kopioi arvo kaikkiin suulakepuristimiin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Läpimitta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Tulostuslangan hinta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Piilota tämä asetus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Tulostuslangan paino"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Älä näytä tätä asetusta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Tulostuslangan pituus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Pidä tämä asetus näkyvissä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Hinta metriä kohden"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n"
+"\n"
+"Tee asetuksista näkyviä napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Materiaali on linkitetty kohteeseen %1 ja niillä on joitain samoja ominaisuuksia."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Poista materiaalin linkitys"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Koskee seuraavia:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Kuvaus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Riippuu seuraavista:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Tarttuvuustiedot"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Tulostusasetukset"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Luo"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Tämän asetuksen arvo eroaa profiilin arvosta.\n"
+"\n"
+"Palauta profiilin arvo napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Jäljennös"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Luo profiili"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
 msgstr ""
+"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n"
+"\n"
+"Palauta laskettu arvo napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Monista profiili"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Nimeä profiili uudelleen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profiilin tuonti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profiilin vienti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Tulostin: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Päivitä nykyiset asetukset tai ohitukset profiiliin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Hylkää tehdyt muutokset"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Tässä profiilissa käytetään tulostimen oletusarvoja, joten siinä ei ole alla olevan listan asetuksia tai ohituksia."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Nykyiset asetukset vastaavat valittua profiilia."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Yleiset asetukset"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Laskettu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Asetus"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profiili"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Nykyinen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Yksikkö"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Näkyvyyden asettaminen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Tarkista kaikki"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Suulake"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Peruuta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Esilämmitä"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Tämän suulakkeen materiaalin väri."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Tämän suulakkeen materiaali."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Tähän suulakkeeseen liitetty suutin."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Alusta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Lämmitettävän pöydän kohdelämpötila. Pöytä lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, pöydän lämmitys sammutetaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Lämmitettävän pöydän nykyinen lämpötila."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Lämmitettävän pöydän esilämmityslämpötila."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Lämmitä pöytä ennen tulostusta. Voit edelleen säätää tulostinta sen lämmitessä, eikä sinun tarvitse odottaa pöydän lämpiämistä, kun olet valmis tulostamaan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Tulostinta ei ole yhdistetty."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Connected printers"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Preset printers"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktiivinen tulostustyö"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Työn nimi"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tulostusaika"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Aikaa jäljellä arviolta"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+msgid "Infill overlapping with this model is modified."
 msgstr ""
-"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n"
-"\n"
-"Avaa profiilin hallinta napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Ota reunuksen tai pohjaristikon tulostus käyttöön. Tämä lisää kappaleen ympärille tai alle tasaisen alueen, joka on helppo leikata pois myöhemmin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
-msgctxt "@label"
-msgid "Gradual infill"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Asteittainen täyttö lisää täytön tiheyttä vähitellen yläosaa kohti."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Muodosta rakenteita, jotka tukevat mallin ulokkeita sisältäviä osia. Ilman tukirakenteita kyseiset osat luhistuvat tulostuksen aikana."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
 msgstr ""
-"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n"
-"\n"
-"Tee asetuksista näkyviä napsauttamalla."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Muokkaa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Koskee seuraavia:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Laa&jennukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Riippuu seuraavista:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "L&isäasetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Ohje"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Uusi projekti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Tämän asetuksen arvo eroaa profiilin arvosta.\n"
-"\n"
-"Palauta profiilin arvo napsauttamalla."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Haluatko varmasti aloittaa uuden projektin? Se tyhjentää alustan ja kaikki tallentamattomat asetukset."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n"
-"\n"
-"Palauta laskettu arvo napsauttamalla."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
+msgid "This package will be installed after restarting."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Kopioi arvo kaikkiin suulakepuristimiin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Asetukset"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Piilota tämä asetus"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Älä näytä tätä asetusta"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Pidä tämä asetus näkyvissä"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Avaa tiedosto(t)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Löysimme vähintään yhden Gcode-tiedoston valitsemiesi tiedostojen joukosta. Voit avata vain yhden Gcode-tiedoston kerrallaan. Jos haluat avata Gcode-tiedoston, valitse vain yksi."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Lisää tulostin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
+msgid "Add printer"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
+msgid "Manage printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a printer"
+msgid "Connected printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a networked printer"
+msgid "Preset printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Tulosta valittu malli asetuksella %1"
+msgstr[1] "Tulosta valitut mallit asetuksella %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "There is no printer found over your network."
+msgid "Time estimation"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Refresh"
+msgid "Material estimation"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
-msgctxt "@label"
-msgid "Add printer by IP"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
-msgctxt "@label"
-msgid "Troubleshooting"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Viipaloidaan..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+msgctxt "@button"
+msgid "Processing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add"
+msgid "Slice"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Could not connect to device."
+msgid "Start the slicing process"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
+msgid "No time estimation available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-msgctxt "@button"
-msgid "Back"
+msgid "No cost estimation available"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Connect"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
-msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
+msgid "Preview"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Tukee irrotettavan aseman kytkemistä lennossa ja sille kirjoittamista."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Irrotettavan aseman tulostusvälineen laajennus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
-msgctxt "@button"
-msgid "Skip"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Päivitys versiosta 2.2 versioon 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.0 to 3.1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.0 to 4.1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Päivitys versiosta 2.6 versioon 2.7"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr ""
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Päivitys versiosta 2.5 versioon 2.6"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Tukee 3MF-tiedostojen lukemista."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr ""
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-lukija"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr ""
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Tukee 3MF-tiedostojen kirjoittamista."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-kirjoitin"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Päivitys versiosta 2.1 versioon 2.2"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
 msgstr ""
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
+msgid "Version Upgrade 3.2 to 3.3"
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
+msgid "Version Upgrade 4.5 to 4.6"
 msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Linkki CuraEngine-viipalointiin taustalla."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine-taustaosa"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Tukee Cura-profiilien tuontia."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-profiilin lukija"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Tukee Cura-profiilien vientiä."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-profiilin kirjoitin"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Tarkistaa laiteohjelmistopäivitykset."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Laiteohjelmiston päivitysten tarkistus"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
 msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
+msgid "Version Upgrade 3.4 to 3.5"
 msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr ""
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Päivitys versiosta 2.7 versioon 3.0"
 
-#: GCodeGzWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
+msgid "Provides support for reading AMF files."
 msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
+msgid "AMF Reader"
 msgstr ""
 
 #: GCodeProfileReader/plugin.json
@@ -5507,64 +5645,34 @@ msgctxt "name"
 msgid "G-code Profile Reader"
 msgstr ""
 
-#: GCodeReader/plugin.json
-msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen."
-
-#: GCodeReader/plugin.json
-msgctxt "name"
-msgid "G-code Reader"
-msgstr "GCode-lukija"
-
-#: GCodeWriter/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
+msgid "Provides a machine actions for updating firmware."
 msgstr ""
 
-#: GCodeWriter/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
+msgid "Firmware Updater"
 msgstr ""
 
-#: ImageReader/plugin.json
-msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Mahdollistaa tulostettavien geometrioiden luomisen 2D-kuvatiedostoista."
-
-#: ImageReader/plugin.json
-msgctxt "name"
-msgid "Image Reader"
-msgstr "Kuvanlukija"
-
-#: LegacyProfileReader/plugin.json
-msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista."
-
-#: LegacyProfileReader/plugin.json
-msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Aikaisempien Cura-profiilien lukija"
-
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr ""
+msgid "Provides support for reading X3D files."
+msgstr "Tukee X3D-tiedostojen lukemista."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
+msgid "X3D Reader"
+msgstr "X3D-lukija"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
+msgid "Find, manage and install new Cura packages."
 msgstr ""
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
+msgid "Toolbox"
 msgstr ""
 
 #: PerObjectSettingsTool/plugin.json
@@ -5587,375 +5695,333 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Jälkikäsittely"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr ""
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Linkki CuraEngine-viipalointiin taustalla."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr ""
+msgid "CuraEngine Backend"
+msgstr "CuraEngine-taustaosa"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr ""
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr ""
+msgid "USB printing"
+msgstr "USB-tulostus"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Tukee irrotettavan aseman kytkemistä lennossa ja sille kirjoittamista."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Tukee Cura-profiilien vientiä."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Irrotettavan aseman tulostusvälineen laajennus"
+msgid "Cura Profile Writer"
+msgstr "Cura-profiilin kirjoitin"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
+msgid "Manages network connections to Ultimaker networked printers."
 msgstr ""
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
+msgid "Ultimaker Network Connection"
 msgstr ""
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr ""
-
-#: SimulationView/plugin.json
-msgctxt "name"
-msgid "Simulation View"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
 msgstr ""
 
-#: SliceInfoPlugin/plugin.json
-msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä."
-
-#: SliceInfoPlugin/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Viipalointitiedot"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker-laitteen toiminnot"
 
-#: SolidView/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Näyttää normaalin kiinteän verkkonäkymän."
+msgid "Provides support for reading 3MF files."
+msgstr "Tukee 3MF-tiedostojen lukemista."
 
-#: SolidView/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Kiinteä näkymä"
+msgid "3MF Reader"
+msgstr "3MF-lukija"
 
-#: SupportEraser/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgid "Writes g-code to a compressed archive."
 msgstr ""
 
-#: SupportEraser/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
+msgid "Compressed G-code Writer"
 msgstr ""
 
-#: Toolbox/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
+msgid "Reads g-code from a compressed archive."
 msgstr ""
 
-#: Toolbox/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Toolbox"
+msgid "Compressed G-code Reader"
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
 msgstr ""
 
-#: TrimeshReader/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
+msgid "Model Checker"
 msgstr ""
 
-#: UFPReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr ""
+msgid "Checks for firmware updates."
+msgstr "Tarkistaa laiteohjelmistopäivitykset."
 
-#: UFPReader/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr ""
+msgid "Firmware Update Checker"
+msgstr "Laiteohjelmiston päivitysten tarkistus"
 
-#: UFPWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr ""
+msgid "Allows loading and displaying G-code files."
+msgstr "Mahdollistaa GCode-tiedostojen lataamisen ja näyttämisen."
 
-#: UFPWriter/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr ""
+msgid "G-code Reader"
+msgstr "GCode-lukija"
 
-#: UltimakerMachineActions/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
 msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker-laitteen toiminnot"
+msgid "Support Eraser"
+msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
+msgid "Provides support for reading model files."
 msgstr ""
 
-#: UM3NetworkPrinting/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
+msgid "Trimesh Reader"
 msgstr ""
 
-#: USBPrinting/plugin.json
-msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne tulostimeen. Lisäosa voi myös päivittää laiteohjelmiston."
-
-#: USBPrinting/plugin.json
-msgctxt "name"
-msgid "USB printing"
-msgstr "USB-tulostus"
-
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.1 versioon Cura 2.2."
-
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Päivitys versiosta 2.1 versioon 2.2"
-
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.2 versioon Cura 2.4."
-
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Päivitys versiosta 2.2 versioon 2.4"
-
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.5 versioon Cura 2.6."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Päivitys versiosta 2.5 versioon 2.6"
+msgid "Sentry Logger"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.6 versioon Cura 2.7."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Päivitys versiosta 2.6 versioon 2.7"
+msgid "UFP Reader"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Tukee profiilien tuontia aikaisemmista Cura-versioista."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Päivitys versiosta 2.7 versioon 3.0"
+msgid "Legacy Cura Profile Reader"
+msgstr "Aikaisempien Cura-profiilien lukija"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgid "Provides a prepare stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
+msgid "Prepare Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgid "Provides a monitor stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
+msgid "Monitor Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr ""
+msgid "Provides the X-Ray view."
+msgstr "Näyttää kerrosnäkymän."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr ""
+msgid "X-Ray View"
+msgstr "Kerrosnäkymä"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr ""
+msgid "Provides support for writing 3MF files."
+msgstr "Tukee 3MF-tiedostojen kirjoittamista."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr ""
+msgid "3MF Writer"
+msgstr "3MF-kirjoitin"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr ""
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Lähettää anonyymiä viipalointitietoa. Voidaan lisäasetuksista kytkeä pois käytöstä."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr ""
+msgid "Slice info"
+msgstr "Viipalointitiedot"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgid "Provides a preview stage in Cura."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
+msgid "Preview Stage"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgid "Provides the Simulation view."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
+msgid "Simulation View"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
+msgid "Machine Settings Action"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr ""
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr ""
+msgid "Material Profiles"
+msgstr "Materiaaliprofiilit"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides a normal solid mesh view."
+msgstr "Näyttää normaalin kiinteän verkkonäkymän."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "Solid View"
+msgstr "Kiinteä näkymä"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
+msgid "Provides support for importing Cura profiles."
+msgstr "Tukee Cura-profiilien tuontia."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
+msgid "Cura Profile Reader"
+msgstr "Cura-profiilin lukija"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgid "Provides support for writing Ultimaker Format Packages."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgid "UFP Writer"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgid "Writes g-code to a file."
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
+msgid "G-code Writer"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Mahdollistaa tulostettavien geometrioiden luomisen 2D-kuvatiedostoista."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgid "Image Reader"
+msgstr "Kuvanlukija"
 
-#: X3DReader/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Tukee X3D-tiedostojen lukemista."
+msgid "Backup and restore your configuration."
+msgstr ""
 
-#: X3DReader/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-lukija"
-
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Mahdollistaa XML-pohjaisten materiaaliprofiilien lukemisen ja kirjoittamisen."
+msgid "Cura Backups"
+msgstr ""
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiaaliprofiilit"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Poista valittu malli"
+#~ msgstr[1] "Poista valitut mallit"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Näyttää kerrosnäkymän."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Keskitä valittu malli"
+#~ msgstr[1] "Keskitä valitut mallit"
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Kerrosnäkymä"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Kerro valittu malli"
+#~ msgstr[1] "Kerro valitut mallit"
 
 #~ msgctxt "@info:status"
 #~ msgid "Successfully imported profile {0}"
diff --git a/resources/i18n/fi_FI/fdmextruder.def.json.po b/resources/i18n/fi_FI/fdmextruder.def.json.po
index 838bdaf5a2..23a1fe6f59 100644
--- a/resources/i18n/fi_FI/fdmextruder.def.json.po
+++ b/resources/i18n/fi_FI/fdmextruder.def.json.po
@@ -4,9 +4,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2017-08-11 14:31+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po
index 3b4dbf1737..22b63e6790 100644
--- a/resources/i18n/fi_FI/fdmprinter.def.json.po
+++ b/resources/i18n/fi_FI/fdmprinter.def.json.po
@@ -4,9 +4,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2017-09-27 12:27+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Finnish\n"
@@ -415,6 +415,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr ""
@@ -481,8 +501,8 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Käytä suulakkeen siirtymää koordinaattijärjestelmään."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -876,8 +896,8 @@ msgstr "Ensimmäisen kerroksen linjaleveyden kerroin. Sen suurentaminen voi para
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Kuori"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -945,166 +965,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Siirtoliikkeen etäisyys ulkoseinämän jälkeen Z-sauman piilottamiseksi paremmin."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Yläpinnan pintakalvon suulake"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Ylimmän pintakalvon tulostukseen käytettävä suulakeryhmä. Tätä käytetään monipursotuksessa."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Yläpinnan pintakalvokerrokset"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Ylimpien pintakalvokerrosten määrä. Yleensä vain yksi ylin kerros riittää tuottamaan korkeampilaatuisia yläpintoja."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Ylä- ja alapuolen suulake"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Ylä- ja alapuolen pintakalvon tulostukseen käytettävä suulakeryhmä. Tätä käytetään monipursotuksessa."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Ylä-/alaosan paksuus"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Ylä-/alakerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää ylä-/alakerrosten lukumäärän."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Yläosan paksuus"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Yläkerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää yläkerrosten lukumäärän."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Yläkerrokset"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Yläkerrosten lukumäärä. Kun se lasketaan yläosan paksuudesta, arvo pyöristetään kokonaislukuun."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Alaosan paksuus"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Alakerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää alakerrosten lukumäärän."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Alakerrokset"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Alakerrosten lukumäärä. Kun se lasketaan alaosan paksuudesta, arvo pyöristetään kokonaislukuun."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Ylä-/alaosan kuvio"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Ylä-/alakerrosten kuvio."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linjat"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Samankeskinen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Siksak"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Alaosan kuvio, alkukerros"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Tulosteen alaosan kuvio ensimmäisellä kerroksella."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linjat"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Samankeskinen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Siksak"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Yläosan/alaosan linjojen suunnat"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Luettelo käytettävistä linjojen kokonaislukusuunnista, kun ylimmällä/alimmalla kerroksella käytetään linja- tai siksak-kuviota. Tämän luettelon elementtejä käytetään järjestyksessä kerrosten edetessä, ja kun luettelon loppu saavutetaan, aloitetaan taas alusta. Luettelon kohteet on erotettu pilkuilla, ja koko luettelo on hakasulkeiden sisällä. Oletusarvo on tyhjä luettelo, jolloin käytetään perinteisiä oletuskulmia (45 ja 135 astetta)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Ulkoseinämän liitos"
@@ -1410,6 +1270,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Kun tämä on käytössä, Z-sauman koordinaatit ovat suhteessa kunkin osan keskikohtaan. Kun asetus on pois käytöstä, koordinaatit määrittävät absoluuttisen sijainnin alustalla."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Yläpinnan pintakalvon suulake"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Ylimmän pintakalvon tulostukseen käytettävä suulakeryhmä. Tätä käytetään monipursotuksessa."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Yläpinnan pintakalvokerrokset"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Ylimpien pintakalvokerrosten määrä. Yleensä vain yksi ylin kerros riittää tuottamaan korkeampilaatuisia yläpintoja."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Ylä- ja alapuolen suulake"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Ylä- ja alapuolen pintakalvon tulostukseen käytettävä suulakeryhmä. Tätä käytetään monipursotuksessa."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Ylä-/alaosan paksuus"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Ylä-/alakerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää ylä-/alakerrosten lukumäärän."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Yläosan paksuus"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Yläkerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää yläkerrosten lukumäärän."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Yläkerrokset"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Yläkerrosten lukumäärä. Kun se lasketaan yläosan paksuudesta, arvo pyöristetään kokonaislukuun."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Alaosan paksuus"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Alakerrosten paksuus tulosteessa. Tämä arvo jaettuna kerroksen korkeusarvolla määrittää alakerrosten lukumäärän."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Alakerrokset"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Alakerrosten lukumäärä. Kun se lasketaan alaosan paksuudesta, arvo pyöristetään kokonaislukuun."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Ylä-/alaosan kuvio"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Ylä-/alakerrosten kuvio."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linjat"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Samankeskinen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Siksak"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Alaosan kuvio, alkukerros"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Tulosteen alaosan kuvio ensimmäisellä kerroksella."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linjat"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Samankeskinen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Siksak"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Yläosan/alaosan linjojen suunnat"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Luettelo käytettävistä linjojen kokonaislukusuunnista, kun ylimmällä/alimmalla kerroksella käytetään linja- tai siksak-kuviota. Tämän luettelon elementtejä käytetään järjestyksessä kerrosten edetessä, ja kun luettelon loppu saavutetaan, aloitetaan taas alusta. Luettelon kohteet on erotettu pilkuilla, ja koko luettelo on hakasulkeiden sisällä. Oletusarvo on tyhjä luettelo, jolloin käytetään perinteisiä oletuskulmia (45 ja 135 astetta)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr ""
@@ -1550,6 +1580,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Pintakalvon poistoleveys"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Suurin poistettavien pintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen ylä-/alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Yläpintakalvon poistoleveys"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Suurin poistettavien yläpintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen yläpintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Alapintakalvon poistoleveys"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Suurin poistettavien alapintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Pintakalvon laajennuksen etäisyys"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Etäisyys, jonka verran pintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja viereisten kerrosten seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Yläpintakalvon laajennuksen etäisyys"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Etäisyys, jonka verran yläpintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja yllä olevan kerroksen seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Alapintakalvon laajennuksen etäisyys"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Etäisyys, jonka verran alapintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja tarttumaan paremmin alla olevan kerroksen seinämiin. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Pintakalvon maksimikulma laajennuksessa"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Pintakalvon minimileveys laajennuksessa"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Tätä kapeampia pintakalvoja ei laajenneta. Tällä vältetään laajentamasta kapeita pintakalvoja, jotka syntyvät, kun mallin pinnalla on rinne lähellä pystysuoraa osuutta."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Täyttö"
@@ -1857,86 +1967,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Pintakalvon poistoleveys"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Suurin poistettavien pintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen ylä-/alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Yläpintakalvon poistoleveys"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Suurin poistettavien yläpintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen yläpintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Alapintakalvon poistoleveys"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Suurin poistettavien alapintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Pintakalvon laajennuksen etäisyys"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Etäisyys, jonka verran pintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja viereisten kerrosten seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Yläpintakalvon laajennuksen etäisyys"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Etäisyys, jonka verran yläpintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja yllä olevan kerroksen seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Alapintakalvon laajennuksen etäisyys"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Etäisyys, jonka verran alapintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja tarttumaan paremmin alla olevan kerroksen seinämiin. Pienemmät arvot vähentävät käytettävän materiaalin määrää."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Pintakalvon maksimikulma laajennuksessa"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Kappaleesi ylä- ja/tai alapinnan ylä- ja alapintakalvoja ei laajenneta, jos niiden kulma on suurempi kuin tämä asetus. Tällä vältetään laajentamasta kapeita pintakalvoja, jotka syntyvät, kun mallin pinnalla on lähes pystysuora rinne. 0 °:n kulma on vaakasuora ja 90 °:n kulma on pystysuora."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Pintakalvon minimileveys laajennuksessa"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Tätä kapeampia pintakalvoja ei laajenneta. Tällä vältetään laajentamasta kapeita pintakalvoja, jotka syntyvät, kun mallin pinnalla on rinne lähellä pystysuoraa osuutta."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr ""
@@ -2553,8 +2583,8 @@ msgstr "Alkukerroksen nopeus"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Alkukerroksen nopeus. Alhaisempi arvo on suositeltava, jotta tarttuvuus alustaan on parempi."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5065,7 +5095,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5414,6 +5444,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Ulokkeiden maksimikulma, kun niistä on tehty tulostettavia. 0 asteessa kaikki ulokkeet korvataan mallikappaleella, joka on yhdistetty alustaan. 90 asteessa mallia ei muuteta millään tavalla."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Ota vapaaliuku käyttöön"
@@ -6352,6 +6392,22 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Mallissa käytettävä muunnosmatriisi, kun malli ladataan tiedostosta."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Käytä suulakkeen siirtymää koordinaattijärjestelmään."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Kuori"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Kappaleesi ylä- ja/tai alapinnan ylä- ja alapintakalvoja ei laajenneta, jos niiden kulma on suurempi kuin tämä asetus. Tällä vältetään laajentamasta kapeita pintakalvoja, jotka syntyvät, kun mallin pinnalla on lähes pystysuora rinne. 0 °:n kulma on vaakasuora ja 90 °:n kulma on pystysuora."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Alkukerroksen nopeus. Alhaisempi arvo on suositeltava, jotta tarttuvuus alustaan on parempi."
+
 #~ msgctxt "material_bed_temperature_layer_0 description"
 #~ msgid "The temperature used for the heated build plate at the first layer."
 #~ msgstr "Lämmitettävän alustan lämpötila ensimmäistä kerrosta tulostettaessa."
diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po
index aa443f1735..980f6a724e 100644
--- a/resources/i18n/fr_FR/cura.po
+++ b/resources/i18n/fr_FR/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:02+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Inconnu"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Chargement des machines..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Configuration des préférences..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Imprimantes en réseau disponibles"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Initialisation de la machine active..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Pas écrasé"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Initialisation du gestionnaire de machine..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Initialisation du volume de fabrication..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Préparation de la scène..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visuel"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Chargement de l'interface..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Initialisation du moteur..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ébauche"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Avertissement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Voulez-vous vraiment supprimer l'objet {0} ? Cette action est irréversible !"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Matériau personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Inconnu"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Personnaliser les profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Tous les types supportés ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tous les fichiers (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "La connexion a échoué"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Recherche d'un nouvel emplacement pour les objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Recherche d'emplacement"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visuel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Le profil visuel est conçu pour imprimer des prototypes et des modèles visuels dans le but d'obtenir une qualité visuelle et de surface élevée."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Impossible de trouver un emplacement"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Le profil d'ingénierie est conçu pour imprimer des prototypes fonctionnels et des pièces finales dans le but d'obtenir une meilleure précision et des tolérances plus étroites."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Ébauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "L'ébauche du profil est conçue pour imprimer les prototypes initiaux et la validation du concept dans le but de réduire considérablement le temps d'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Les imprimantes ci-dessous ne peuvent pas être connectées car elles font partie d'un groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Imprimantes en réseau disponibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume d'impression"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Pas écrasé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Échec du démarrage de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Veuillez nous envoyer ce rapport d'incident pour que nous puissions résoudre le problème.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Envoyer le rapport de d'incident à Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Afficher le rapport d'incident détaillé"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Afficher le dossier de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Sauvegarder et réinitialiser la configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Rapport d'incident"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1078 +249,780 @@ msgstr ""
 "            <p>Veuillez utiliser le bouton « Envoyer rapport » pour publier automatiquement un rapport d'erreur sur nos serveurs</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informations système"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Inconnu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Version Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Langue de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Langue du SE"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plate-forme"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Version Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Version PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Pas encore initialisé<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Version OpenGL : {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Revendeur OpenGL : {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Moteur de rendu OpenGL : {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Retraçage de l'erreur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Journaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Envoyer rapport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Chargement des machines..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Configuration des préférences..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Initialisation de la machine active..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Initialisation du gestionnaire de machine..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Initialisation du volume de fabrication..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Préparation de la scène..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Chargement de l'interface..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Initialisation du moteur..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Un seul fichier G-Code peut être chargé à la fois. Importation de {0} sautée"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Avertissement"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Impossible d'ouvrir un autre fichier si le G-Code est en cours de chargement. Importation de {0} sautée"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erreur"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplication et placement d'objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Placement des objets"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Placement de l'objet"
+msgid "Login failed"
+msgstr "La connexion a échoué"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Impossible de lire la réponse."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "L'état fourni n'est pas correct."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Veuillez donner les permissions requises lors de l'autorisation de cette application."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Une erreur s'est produite lors de la connexion, veuillez réessayer."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Impossible de lancer une nouvelle procédure de connexion. Vérifiez si une autre tentative de connexion est toujours active."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Impossible d’atteindre le serveur du compte Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Le fichier existe déjà"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Le fichier <filename>{0}</filename> existe déjà. Êtes-vous sûr de vouloir le remplacer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de fichier invalide :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Buse"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Paramètres mis à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrudeuse(s) désactivée(s)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Échec de l'exportation du profil vers <filename>{0}</filename> : le plug-in du générateur a rapporté une erreur."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil exporté vers <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "L'exportation a réussi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> : {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Impossible d'importer le profil depuis <filename>{0}</filename> avant l'ajout d'une imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Aucun profil personnalisé à importer dans le fichier <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Le profil <filename>{0}</filename> contient des données incorrectes ; échec de l'importation."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Échec de l'importation du profil depuis le fichier <filename>{0}</filename> :"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Importation du profil {0} réussie."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Le fichier {0} ne contient pas de profil valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Le profil {0} est un type de fichier inconnu ou est corrompu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Personnaliser le profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Il manque un type de qualité au profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Il manque la pile globale."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Impossible d'ajouter le profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Le type de qualité « {0} » n'est pas compatible avec la définition actuelle de la machine active « {1} »."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Avertissement : le profil n'est pas visible car son type de qualité « {0} » n'est pas disponible pour la configuration actuelle. Passez à une combinaison matériau/buse qui peut utiliser ce type de qualité."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Non pris en charge"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Buse"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Les paramètres ont été modifiés pour correspondre aux extrudeuses actuellement disponibles :"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Recherche d'un nouvel emplacement pour les objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Paramètres mis à jour"
+msgid "Finding Location"
+msgstr "Recherche d'emplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Impossible de trouver un emplacement dans le volume d'impression pour tous les objets"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrudeuse(s) désactivée(s)"
+msgid "Can't Find Location"
+msgstr "Impossible de trouver un emplacement"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Groupe nº {group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Ajouter"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Fin"
+msgid "Close"
+msgstr "Fermer"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuler"
+msgid "Next"
+msgstr "Suivant"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groupe nº {group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Fin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Paroi externe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Parois internes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Couche extérieure"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Remplissage"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Remplissage du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interface du support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Jupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Tour primaire"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Déplacement"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Rétractions"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Autre"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Suivant"
+msgid "Add"
+msgstr "Ajouter"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Fermer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistant de modèle 3D"
+msgid "Cancel"
+msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Ouvrir un fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Impossible d'ouvrir le fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recommandé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Le plug-in 3MF Writer est corrompu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Aucune autorisation d'écrire l'espace de travail ici."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Erreur d'écriture du fichier 3MF."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Projet Cura fichier 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Fichier AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "La hauteur du volume d'impression a été réduite en raison de la valeur du paramètre « Séquence d'impression » afin d'éviter que le portique ne heurte les modèles imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Sauvegardes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Création de votre sauvegarde..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Téléchargement de votre sauvegarde..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Le téléchargement de votre sauvegarde est terminé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "La sauvegarde dépasse la taille de fichier maximale."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gérer les sauvegardes"
+msgid "Build Volume"
+msgstr "Volume d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Impossible de créer une archive à partir du répertoire de données de l'utilisateur : {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
+msgid "Backup"
+msgstr "Sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "A essayé de restaurer une sauvegarde Cura sans disposer de données ou de métadonnées appropriées."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Veuillez vérifier les paramètres et si vos modèles :\n"
-"- S'intègrent dans le volume de fabrication\n"
-"- Sont affectés à un extrudeur activé\n"
-"- N sont pas tous définis comme des mailles de modificateur"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "A essayé de restaurer une sauvegarde Cura supérieure à la version actuelle."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Traitement des couches"
+msgid "Multiplying and placing objects"
+msgstr "Multiplication et placement d'objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informations"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profil Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Impossible d'accéder aux informations de mise à jour."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne possédez pas la dernière version disponible, il est recommandé de mettre à jour le micrologiciel sur votre imprimante avec la version {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nouveau firmware %s disponible"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Comment effectuer la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Mettre à jour le firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Fichier G-Code compressé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Fichier GCode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analyse du G-Code"
+msgid "Placing Objects"
+msgstr "Placement des objets"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Détails G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Fichier G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Veuillez préparer le G-Code avant d'exporter."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Image JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Image JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Image PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Image BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Image GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profils Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Paramètres de la machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Surveiller"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Paramètres par modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurer les paramètres par modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post-traitement"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifier le G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Préparer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Aperçu"
+msgid "Placing Object"
+msgstr "Placement de l'objet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Enregistrer sur un lecteur amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Enregistrer sur un lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Aucun format de fichier n'est disponible pour écriture !"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Enregistrement sur le lecteur amovible <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossible d'enregistrer <filename>{0}</filename> : <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossible d'enregistrer sur le lecteur {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Enregistré sur le lecteur amovible {0} sous {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Fichier enregistré"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejecter le lecteur amovible {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Lecteur {0} éjecté. Vous pouvez maintenant le retirer en tout sécurité."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Retirez le lecteur en toute sécurité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Impossible d'éjecter {0}. Un autre programme utilise peut-être ce lecteur."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Lecteur amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vue simulation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Rien ne s'affiche car vous devez d'abord découper."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Pas de couches à afficher"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Ne plus afficher ce message"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vue en couches"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Votre modèle n'est pas fonctionnel. Les zones surlignées indiquent que des surfaces manquent ou sont étrangères."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Erreurs du modèle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vue solide"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blocage des supports"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
+msgid "AMF File"
+msgstr "Fichier AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Changements détectés à partir de votre compte Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Fichier GCode"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Mettre à jour le firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchronisation..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Fichier X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Refuser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Accepter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Plug-in d'accord de licence"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Décliner et supprimer du compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Échec de téléchargement des plugins {}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchronisation..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Changements détectés à partir de votre compte Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Vous devez quitter et redémarrer {} avant que les changements apportés ne prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Échec de téléchargement des plugins {}"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Vous souhaitez synchroniser du matériel et des logiciels avec votre compte ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Ouvrir le maillage triangulaire compressé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchroniser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Paramètres par modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF binaire"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurer les paramètres par modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "JSON incorporé glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format Triangle de Stanford"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifier le G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange compressé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Impossible d'écrire dans le fichier UFP :"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Impossible de couper avec les paramètres actuels. Les paramètres suivants contiennent des erreurs : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivellement du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Impossible de couper en raison de certains paramètres par modèle. Les paramètres suivants contiennent des erreurs sur un ou plusieurs modèles : {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Sélectionner les mises à niveau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Impossible de couper car la tour primaire ou la (les) position(s) d'amorçage ne sont pas valides."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Impossible de couper car il existe des objets associés à l'extrudeuse désactivée %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimer via le cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Veuillez vérifier les paramètres et si vos modèles :\n"
+"- S'intègrent dans le volume de fabrication\n"
+"- Sont affectés à un extrudeur activé\n"
+"- N sont pas tous définis comme des mailles de modificateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Connecté via le cloud"
+msgid "Processing Layers"
+msgstr "Traitement des couches"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impression par USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimer via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimer via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Connecté via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impression en cours"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profil Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Connecter via le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nouvelle imprimante détectée à partir de votre compte Ultimaker"
 msgstr[1] "Nouvelles imprimantes détectées à partir de votre compte Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Ajout de l'imprimante {name} ({model}) à partir de votre compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1295,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... et {0} autre"
 msgstr[1] "... et {0} autres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Imprimantes ajoutées à partir de Digital Factory :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Une connexion cloud n'est pas disponible pour une imprimante"
 msgstr[1] "Une connexion cloud n'est pas disponible pour certaines imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Cette imprimante n'est pas associée à Digital Factory :"
 msgstr[1] "Ces imprimantes ne sont pas associées à Digital Factory :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Pour établir une connexion, veuillez visiter le site {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Conserver les configurations d'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Supprimer des imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "L'imprimante {printer_name} sera supprimée jusqu'à la prochaine synchronisation de compte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Pour supprimer {printer_name} définitivement, visitez le site {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Voulez-vous vraiment supprimer {printer_name} temporairement ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Supprimer des imprimantes ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1374,7 +1110,7 @@ msgstr[1] ""
 "Vous êtes sur le point de supprimer {0} imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1383,2090 +1119,2486 @@ msgstr ""
 "Vous êtes sur le point de supprimer toutes les imprimantes de Cura. Cette action est irréversible.\n"
 "Voulez-vous vraiment continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Lancez et surveillez des impressions où que vous soyez avec votre compte Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Se connecter à Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimer via le cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Prise en main"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Connecté via le cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Code d'erreur inconnu lors du téléchargement d'une tâche d'impression : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
+msgid "tomorrow"
+msgstr "demain"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Mettre à jour votre imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "aujourd'hui"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
+msgid "Sending Print Job"
+msgstr "Lancement d'une tâche d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Envoi de matériaux à l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Vous tentez de vous connecter à {0} mais ce n'est pas l'hôte de groupe. Vous pouvez visiter la page Web pour la configurer en tant qu'hôte de groupe."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Pas un hôte de groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurer le groupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Lancez et surveillez des impressions où que vous soyez avec votre compte Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Se connecter à Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Prise en main"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Veuillez patienter jusqu'à ce que la tâche en cours ait été envoyée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erreur d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Impossible de transférer les données à l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Erreur de réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Lancement d'une tâche d'impression"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura a détecté des profils de matériau qui ne sont pas encore installés sur l'imprimante hôte du groupe {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Téléchargement de la tâche d'impression sur l'imprimante."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Envoi de matériaux à l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "La file d'attente pour les tâches d'impression est pleine. L'imprimante ne peut pas accepter une nouvelle tâche."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "La file d'attente est pleine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "L'envoi de la tâche d'impression à l'imprimante a réussi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Données envoyées"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Vous tentez de vous connecter à une imprimante qui n'exécute pas Ultimaker Connect. Veuillez mettre à jour l'imprimante avec le dernier micrologiciel."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Mettre à jour votre imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Connecté sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Connecter via le réseau"
+msgid "Select upgrades"
+msgstr "Sélectionner les mises à niveau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "demain"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "aujourd'hui"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recommandé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impression par USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimer via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Le fichier projet <filename>{0}</filename> contient un type de machine inconnu <message>{1}</message>. Impossible d'importer la machine. Les modèles seront importés à la place."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimer via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Ouvrir un fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Connecté via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Le fichier de projet <filename>{0}</filename> est soudainement inaccessible : <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Une impression USB est en cours, la fermeture de Cura arrêtera cette impression. Êtes-vous sûr ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Impossible d'ouvrir le fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Une impression est encore en cours. Cura ne peut pas démarrer une autre impression via USB tant que l'impression précédente n'est pas terminée."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impression en cours"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Le fichier de projet <filename>{0}</filename> a été réalisé en utilisant des profils inconnus de cette version d'Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Fichier X3D"
+msgid "3MF File"
+msgstr "Fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Visualisation par rayons X"
+msgid "Compressed G-code File"
+msgstr "Fichier G-Code compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ne prend pas en charge le mode texte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Ouvrir un projet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistant de modèle 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Mettre à jour l'existant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Un ou plusieurs modèles 3D peuvent ne pas s'imprimer de manière optimale en raison de la taille du modèle et de la configuration matérielle :</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Découvrez comment optimiser la qualité et la fiabilité de l'impression.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Consultez le guide de qualité d'impression</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Créer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Impossible d'accéder aux informations de mise à jour."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Résumé - Projet Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "De nouvelles fonctionnalités ou des correctifs de bugs sont disponibles pour votre {machine_name} ! Si vous ne possédez pas la dernière version disponible, il est recommandé de mettre à jour le micrologiciel sur votre imprimante avec la version {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Paramètres de l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nouveau firmware %s disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Comment le conflit de la machine doit-il être résolu ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Comment effectuer la mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Fichier G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Groupe d'imprimantes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analyse du G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Paramètres de profil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Détails G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Assurez-vous que le g-code est adapté à votre imprimante et à la configuration de l'imprimante avant d'y envoyer le fichier. La représentation du g-code peut ne pas être exacte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blocage des supports"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Comment le conflit du profil doit-il être résolu ?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Créer un volume dans lequel les supports ne sont pas imprimés."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nom"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Ouvrir le maillage triangulaire compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Absent du profil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF binaire"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 écrasent"
-msgstr[1] "%1 écrase"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "JSON incorporé glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Dérivé de"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Format Triangle de Stanford"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 écrasent"
-msgstr[1] "%1, %2 écrase"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange compressé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Paramètres du matériau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Comment le conflit du matériau doit-il être résolu ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profils Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilité des paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Préparer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Surveiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Paramètres visibles :"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Visualisation par rayons X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 sur %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Erreur d'écriture du fichier 3MF."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Ouvrir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Projet Cura fichier 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Vous en voulez plus ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Le plug-in 3MF Writer est corrompu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Sauvegarder maintenant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Aucune autorisation d'écrire l'espace de travail ici."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Sauvegarde automatique"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Le système d'exploitation ne permet pas d'enregistrer un fichier de projet à cet emplacement ou avec ce nom de fichier."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Aperçu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vue en couches"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Supprimer la sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression filaire est activée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurer la sauvegarde"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Rien ne s'affiche car vous devez d'abord découper."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Pas de couches à afficher"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Version Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Ne plus afficher ce message"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Paramètres de la machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Matériaux"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vue solide"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profils"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mes sauvegardes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Impossible d'écrire dans le fichier UFP :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ne prend pas en charge le mode non-texte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Veuillez préparer le G-Code avant d'exporter."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Image JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Image JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Image PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Image BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Image GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Une erreur s’est produite lors de la tentative de restauration de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Une erreur s’est produite lors du téléchargement de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Création de votre sauvegarde..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Une erreur s'est produite lors de la création de votre sauvegarde."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Téléchargement de votre sauvegarde..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Le téléchargement de votre sauvegarde est terminé."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "La sauvegarde dépasse la taille de fichier maximale."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gérer les sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Mettre à jour le firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Le firmware est le logiciel fonctionnant directement dans votre imprimante 3D. Ce firmware contrôle les moteurs pas à pas, régule la température et surtout, fait que votre machine fonctionne."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Le firmware fourni avec les nouvelles imprimantes fonctionne, mais les nouvelles versions ont tendance à fournir davantage de fonctionnalités ainsi que des améliorations."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Mise à niveau automatique du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Charger le firmware personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Impossible de se connecter à l'imprimante ; échec de la mise à jour du firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Échec de la mise à jour du firmware, car cette fonctionnalité n'est pas prise en charge par la connexion avec l'imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Sélectionner le firmware personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Mise à jour du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Mise à jour du firmware en cours."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Mise à jour du firmware terminée."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur inconnue."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur de communication."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Échec de la mise à jour du firmware en raison d'une erreur d'entrée/de sortie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Échec de la mise à jour du firmware en raison du firmware manquant."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Conversion de l'image..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distance maximale de chaque pixel à partir de la « Base »."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Vous devez accepter la licence pour installer le package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hauteur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Changements à partir de votre compte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "La hauteur de la base à partir du plateau en millimètres."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Ignorer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Suivant"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La largeur en millimètres sur le plateau."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Les packages suivants seront ajoutés :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largeur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profondeur en millimètres sur le plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Confirmer la désinstallation"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profondeur (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Matériaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Le plus foncé est plus haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Le plus clair est plus haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Confirmer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linéaire"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contributions de la communauté"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidité"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Plug-ins de la communauté"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Matériaux génériques"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmission 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Version"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La quantité de lissage à appliquer à l'image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Dernière mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Lissage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marque"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Téléchargements"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Installed plugins"
+msgstr "Plug-ins installés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Paramètres de la buse"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Aucun plug-in n'a été installé."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Taille de la buse"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Matériaux installés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Aucun matériau n'a été installé."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diamètre du matériau compatible"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Plug-ins groupés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Décalage buse X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Matériaux groupés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Décalage buse Y"
+msgid "Website"
+msgstr "Site Internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numéro du ventilateur de refroidissement"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extrudeuse G-Code de démarrage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extrudeuse G-Code de fin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Se connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Paramètres de l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Récupération des paquets..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Largeur)"
+msgid "Compatibility"
+msgstr "Compatibilité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profondeur)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hauteur)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forme du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origine au centre"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Plateau chauffant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Fiche technique"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de fabrication chauffant"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Fiche de sécurité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Parfum G-Code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Directives d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Paramètres de la tête d'impression"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Site Internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Matériaux"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Installé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Aller sur le Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Hauteur du portique"
+msgid "Will install upon restarting"
+msgstr "S'installera au redémarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Nombre d'extrudeuses"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Code de démarrage"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Mise à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-Code de fin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Mis à jour"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Assurez-vous que votre imprimante est connectée :\n"
-"- Vérifiez si l'imprimante est sous tension.\n"
-"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Revenir à une version précédente"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Désinstaller"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Installé"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Rechercher des matériaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Veuillez connecter votre imprimante au réseau."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Voir les manuels d'utilisation en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Quitter %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Précédent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installer"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Type de maille"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modèle normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimer comme support"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modifier les paramètres de chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Ne prend pas en charge le chevauchement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Maille de remplissage uniquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Maille de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Sélectionner les paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Sélectionner les paramètres pour personnaliser ce modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrer..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Afficher tout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Plug-in de post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts de post-traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Ajouter un script"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Modifiez les scripts de post-traitement actifs."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Le script suivant est actif :"
 msgstr[1] "Les scripts suivants sont actifs :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Modèle de couleurs"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Couleur du matériau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Type de ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Vitesse"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Épaisseur de la couche"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Mode de compatibilité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Déplacements"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Aides"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Coque"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Remplissage"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Afficher uniquement les couches supérieures"
+msgid "Queued"
+msgstr "Mis en file d'attente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Afficher 5 niveaux détaillés en haut"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gérer dans le navigateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Haut / bas"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Paroi interne"
+msgid "Print jobs"
+msgstr "Tâches d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Temps total d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "Attente de"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Plus d'informations sur la collecte de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Je ne veux pas envoyer de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Autoriser l'envoi de données anonymes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Précédent"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Support"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Fiche technique"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Fiche de sécurité"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Directives d'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Site Internet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour l'installation ou la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Acheter des bobines de matériau</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Mis à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Aller sur le Marché en ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Rechercher des matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Vous devez redémarrer Cura pour que les changements apportés aux paquets ne prennent effet."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Quitter %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installé"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "S'installera au redémarrage"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Connexion</a> nécessaire pour effectuer la mise à jour"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Revenir à une version précédente"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Désinstaller"
+msgid "Configuration Changes"
+msgstr "Modifications de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Changements à partir de votre compte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Ignorer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Suivant"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Les packages suivants seront ajoutés :"
+msgid "Override"
+msgstr "Remplacer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Les packages suivants ne peuvent pas être installés en raison d'une version incompatible de Cura :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmer la désinstallation"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Vous désinstallez des matériaux et/ou des profils qui sont encore en cours d'utilisation. La confirmation réinitialisera les matériaux / profils suivants à leurs valeurs par défaut."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Matériaux"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmer"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "L'imprimante assignée, %1, nécessite la modification de configuration suivante :"
+msgstr[1] "L'imprimante assignée, %1, nécessite les modifications de configuration suivantes :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Vous devez accepter la licence pour installer le package"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "L'imprimante %1 est assignée, mais le projet contient une configuration matérielle inconnue."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Site Internet"
+msgid "Change material %1 from %2 to %3."
+msgstr "Changer le matériau %1 de %2 à %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Charger %3 comme matériau %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Version"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Changer le print core %1 de %2 à %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Dernière mise à jour"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Changer le plateau en %1 (Ceci ne peut pas être remplacé)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marque"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Téléchargements"
+msgid "Glass"
+msgstr "Verre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contributions de la communauté"
+msgid "Aluminum"
+msgstr "Aluminium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plug-ins de la communauté"
+msgid "Unavailable printer"
+msgstr "Imprimante indisponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Matériaux génériques"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Impossible de se connecter à la base de données Cura Package. Veuillez vérifier votre connexion."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plug-ins installés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Aucun plug-in n'a été installé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Matériaux installés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Aucun matériau n'a été installé."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plug-ins groupés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Matériaux groupés"
+msgid "First available"
+msgstr "Premier disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Récupération des paquets..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Veuillez vous connecter pour obtenir les plug-ins et matériaux vérifiés pour Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marché en ligne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivellement du plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Démarrer le nivellement du plateau"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Aller à la position suivante"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Connecter à l'imprimante en réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Pour imprimer directement sur votre imprimante via le réseau, assurez-vous que votre imprimante est connectée au réseau via un câble Ethernet ou en connectant votre imprimante à votre réseau Wi-Fi. Si vous ne connectez pas Cura avec votre imprimante, vous pouvez utiliser une clé USB pour transférer les fichiers g-code sur votre imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Sélectionnez votre imprimante dans la liste ci-dessous :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifier"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Supprimer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Rafraîchir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Si votre imprimante n'apparaît pas dans la liste, lisez le <a href='%1'>guide de dépannage de l'impression en réseau</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Version du firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adresse"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Cette imprimante n'est pas configurée pour héberger un groupe d'imprimantes."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Cette imprimante est l'hôte d'un groupe d'imprimantes %1."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Adresse IP non valide"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Veuillez saisir une adresse IP valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adresse de l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Saisissez l'adresse IP de votre imprimante sur le réseau."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Modifications de configuration"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Remplacer"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "L'imprimante assignée, %1, nécessite la modification de configuration suivante :"
-msgstr[1] "L'imprimante assignée, %1, nécessite les modifications de configuration suivantes :"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "L'imprimante %1 est assignée, mais le projet contient une configuration matérielle inconnue."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Changer le matériau %1 de %2 à %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Charger %3 comme matériau %1 (Ceci ne peut pas être remplacé)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Changer le print core %1 de %2 à %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Changer le plateau en %1 (Ceci ne peut pas être remplacé)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Si vous sélectionnez « Remplacer », les paramètres de la configuration actuelle de l'imprimante seront utilisés. Cela peut entraîner l'échec de l'impression."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimer sur le réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Verre"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminium"
+msgid "Printer selection"
+msgstr "Sélection d'imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Déplacer l'impression en haut"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Effacer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Reprendre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Mise en pause..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Reprise..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pause"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Abandon..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abandonner"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Êtes-vous sûr de vouloir déplacer %1 en haut de la file d'attente ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Déplacer l'impression en haut de la file d'attente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Êtes-vous sûr de vouloir supprimer %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Supprimer l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Êtes-vous sûr de vouloir annuler %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abandonner l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abandonné"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminé"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Préparation..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Abandon..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Mise en pause..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "En pause"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Reprise..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Action requise"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Finit %1 à %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gérer l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Veuillez mettre à jour le Firmware de votre imprimante pour gérer la file d'attente à distance."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Chargement..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Injoignable"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactif"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sans titre"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonyme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Nécessite des modifications de configuration"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Détails"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Imprimante indisponible"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Sélectionnez les mises à niveau disponibles pour cet Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Premier disponible"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Plateau chauffant (kit officiel ou fabriqué soi-même)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abandonné"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminé"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Pour obtenir des résultats d'impression optimaux, vous pouvez maintenant régler votre plateau. Quand vous cliquez sur 'Aller à la position suivante', la buse se déplacera vers les différentes positions pouvant être réglées."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Préparation..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Pour chacune des positions ; glissez un bout de papier sous la buse et ajustez la hauteur du plateau. La hauteur du plateau est juste lorsque la pointe de la buse gratte légèrement le papier."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Abandon..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Démarrer le nivellement du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Mise en pause..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Aller à la position suivante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "En pause"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Ouvrir un projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Reprise..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Mettre à jour l'existant"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Action requise"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Créer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Finit %1 à %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Résumé - Projet Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Paramètres de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Comment le conflit de la machine doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Groupe d'imprimantes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Paramètres de profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Comment le conflit du profil doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nom"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Absent du profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 écrasent"
+msgstr[1] "%1 écrase"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Dérivé de"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 écrasent"
+msgstr[1] "%1, %2 écrase"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Paramètres du matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Comment le conflit du matériau doit-il être résolu ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilité des paramètres"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Paramètres visibles :"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 sur %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Le chargement d'un projet effacera tous les modèles sur le plateau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Ouvrir"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Certains éléments pourraient causer des problèmes à cette impression. Cliquez pour voir les conseils d'ajustement."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Assurez-vous que votre imprimante est connectée :\n"
+"- Vérifiez si l'imprimante est sous tension.\n"
+"- Vérifiez si l'imprimante est connectée au réseau.- Vérifiez si vous êtes connecté pour découvrir les imprimantes connectées au cloud."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Veuillez connecter votre imprimante au réseau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Voir les manuels d'utilisation en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Plus d'informations sur la collecte de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura recueille des données anonymes afin d'améliorer la qualité d'impression et l'expérience utilisateur. Voici un exemple de toutes les données partagées :"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Je ne veux pas envoyer de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Autoriser l'envoi de données anonymes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Mis en file d'attente"
+msgid "Color scheme"
+msgstr "Modèle de couleurs"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gérer dans le navigateur"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Couleur du matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Type de ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Vitesse"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Il n'y a pas de travaux d'impression dans la file d'attente. Découpez et envoyez une tache pour en ajouter une."
+msgid "Compatibility Mode"
+msgstr "Mode de compatibilité"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Tâches d'impression"
+msgid "Travels"
+msgstr "Déplacements"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Temps total d'impression"
+msgid "Helpers"
+msgstr "Aides"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Attente de"
+msgid "Shell"
+msgstr "Coque"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimer sur le réseau"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Remplissage"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Sélection d'imprimantes"
+msgid "Only Show Top Layers"
+msgstr "Afficher uniquement les couches supérieures"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Se connecter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Afficher 5 niveaux détaillés en haut"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Votre clé pour une impression 3D connectée"
+msgid "Top / Bottom"
+msgstr "Haut / bas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n"
-"- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où\n"
-"- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Paroi interne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Créer un compte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Vérification en cours..."
+msgid "max"
+msgstr "max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Paramètres de la buse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Compte synchronisé"
+msgid "Nozzle size"
+msgstr "Taille de la buse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Un problème s'est produit..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Installer les mises à jour en attente"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diamètre du matériau compatible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Rechercher des mises à jour de compte"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Décalage buse X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Dernière mise à jour : %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Décalage buse Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Compte Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Numéro du ventilateur de refroidissement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Déconnexion"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extrudeuse G-Code de démarrage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extrudeuse G-Code de fin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Paramètres de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Aucune estimation de la durée n'est disponible"
+msgid "X (Width)"
+msgstr "X (Largeur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Aucune estimation des coûts n'est disponible"
+msgid "Y (Depth)"
+msgstr "Y (Profondeur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Aperçu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Hauteur)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimation de durée"
+msgid "Build plate shape"
+msgstr "Forme du plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimation du matériau"
+msgid "Origin at center"
+msgstr "Origine au centre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Plateau chauffant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de fabrication chauffant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Découpe en cours..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Parfum G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Impossible de découper"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Paramètres de la tête d'impression"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Hauteur du portique"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Nombre d'extrudeuses"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Code de démarrage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-Code de fin"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Conversion de l'image..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distance maximale de chaque pixel à partir de la « Base »."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hauteur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "La hauteur de la base à partir du plateau en millimètres."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "La largeur en millimètres sur le plateau."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largeur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profondeur en millimètres sur le plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profondeur (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Pour les lithophanies, les pixels foncés doivent correspondre à des emplacements plus épais afin d'empêcher la lumière de passer. Pour des cartes de hauteur, les pixels clairs signifient un terrain plus élevé, de sorte que les pixels clairs doivent correspondre à des emplacements plus épais dans le modèle 3D généré."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Le plus foncé est plus haut"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Le plus clair est plus haut"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Pour les lithophanes, un modèle logarithmique simple de la translucidité est disponible. Pour les cartes de hauteur, les valeurs des pixels correspondent aux hauteurs de façon linéaire."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linéaire"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidité"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Le pourcentage de lumière pénétrant une impression avec une épaisseur de 1 millimètre. La diminution de cette valeur augmente le contraste dans les régions sombres et diminue le contraste dans les régions claires de l'image."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmission 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La quantité de lissage à appliquer à l'image."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Lissage"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mes sauvegardes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Vous n'avez actuellement aucune sauvegarde. Utilisez le bouton « Sauvegarder maintenant » pour en créer une."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Pendant la phase de prévisualisation, vous ne pourrez voir qu'un maximum de 5 sauvegardes. Supprimez une sauvegarde pour voir les plus anciennes."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Sauvegardez et synchronisez vos paramètres Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Traitement"
+msgid "Want more?"
+msgstr "Vous en voulez plus ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Découper"
+msgid "Backup Now"
+msgstr "Sauvegarder maintenant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Démarrer le processus de découpe"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Sauvegarde automatique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Créez automatiquement une sauvegarde chaque jour où Cura est démarré."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Version Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Matériaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profils"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuler"
+msgid "Restore"
+msgstr "Restaurer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Afficher le guide de dépannage en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Supprimer la sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Passer en Plein écran"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Êtes-vous sûr de vouloir supprimer cette sauvegarde ? Il est impossible d'annuler cette action."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Quitter le mode plein écran"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurer la sauvegarde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Annuler"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Vous devez redémarrer Cura avant que votre sauvegarde ne soit restaurée. Voulez-vous fermer Cura maintenant ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Rétablir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoris"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Générique"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fichier"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Enregistrer le projet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "E&xporter..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Quitter"
+msgid "Export Selection..."
+msgstr "Exporter la sélection..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Vue 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Ouvrir un fichier &récent"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Sélectionner la configuration"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Activé"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marché en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualisation"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Vue de face"
+msgid "&Camera position"
+msgstr "Position de la &caméra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Vue du dessus"
+msgid "Camera view"
+msgstr "Vue de la caméra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Vue latérale gauche"
+msgid "Perspective"
+msgstr "Perspective"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Vue latérale droite"
+msgid "Orthographic"
+msgstr "Orthographique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configurer Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Ajouter une imprimante..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Imprimantes réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Gérer les &imprimantes..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Imprimantes locales"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Gérer les matériaux..."
+msgid "Visible Settings"
+msgstr "Paramètres visibles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Ajouter d'autres matériaux du Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+msgid "Collapse All Categories"
+msgstr "Réduire toutes les catégories"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Ignorer les modifications actuelles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gérer la visibilité des paramètres..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Créer un profil à partir des paramètres / forçages actuels..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Gérer les profils..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Im&primante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Afficher la &documentation en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Notifier un &bug"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Définir comme extrudeur actif"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Quoi de neuf"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Activer l'extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "À propos de..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Désactiver l'extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Supprimer le modèle sélectionné"
-msgstr[1] "Supprimer les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centrer le modèle sélectionné"
-msgstr[1] "Centrer les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimer le modèle sélectionné avec :"
+msgstr[1] "Imprimer les modèles sélectionnés avec :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Multiplier le modèle sélectionné"
 msgstr[1] "Multiplier les modèles sélectionnés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Supprimer le modèle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Nombre de copies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ce&ntrer le modèle sur le plateau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Grouper les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Personnaliser les profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Dégrouper les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Ignorer les modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Fusionner les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Multiplier le modèle..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
+"\n"
+"Cliquez pour ouvrir le gestionnaire de profils."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Sélectionner tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "On"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Supprimer les objets du plateau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Off"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Recharger tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Expérimental"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Réorganiser tous les modèles sur tous les plateaux"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recommandé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Réorganiser tous les modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personnalisé"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Réorganiser la sélection"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Paramètres d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Réinitialiser toutes les positions des modèles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Réinitialiser tous les modèles et transformations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Remplissage graduel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Ouvrir le(s) fichier(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nouveau projet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profils"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Afficher le dossier de configuration"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurer la visibilité des paramètres..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Support"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marché en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ce paquet sera installé après le redémarrage."
+msgid "Adhesion"
+msgstr "Adhérence"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Général"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Activez l'impression d'une bordure ou plaquette (Brim/Raft). Cela ajoutera une zone plate autour de ou sous votre objet qui est facile à découper par la suite."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Il n'y a pas de profil %1 pour la configuration dans l'extrudeur %2. L'intention par défaut sera utilisée à la place"
+msgstr[1] "Il n'y a pas de profil %1 pour les configurations dans les extrudeurs %2. L'intention par défaut sera utilisée à la place"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Imprimantes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profils"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Activer l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Fermeture de %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nom de la tâche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Voulez-vous vraiment quitter %1 ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Durée d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Durée restante estimée"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Ouvrir le(s) fichier(s)"
+msgid "Discard or Keep changes"
+msgstr "Annuler ou conserver les modifications"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Installer le paquet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Vous avez personnalisé certains paramètres de profil.\n"
+"Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
+"Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Ouvrir le(s) fichier(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Paramètres du profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Ajouter une imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Quoi de neuf"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Annuler et ne plus me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Conserver et ne plus me demander"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Annuler les modifications"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Conserver les modifications"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "À propos de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version : %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solution complète pour l'impression 3D par dépôt de filament fondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3475,1982 +3607,2103 @@ msgstr ""
 "Cura a été développé par Ultimaker B.V. en coopération avec la communauté Ultimaker.\n"
 "Cura est fier d'utiliser les projets open source suivants :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface utilisateur graphique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Cadre d'application"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Générateur G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Bibliothèque de communication interprocess"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Langage de programmation"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Cadre IUG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Liens cadre IUG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bibliothèque C/C++ Binding"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format d'échange de données"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Prise en charge de la bibliothèque pour le calcul scientifique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Prise en charge de la bibliothèque pour des maths plus rapides"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Prise en charge de la bibliothèque pour le traitement des objets planaires"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Prise en charge de la bibliothèque pour le traitement des mailles triangulaires"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Prise en charge de la bibliothèque pour le traitement des fichiers 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Prise en charge de la bibliothèque pour les métadonnées et le streaming de fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Bibliothèque de communication série"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bibliothèque de découverte ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliothèque de découpe polygone"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Vérificateur de type statique pour Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificats racines pour valider la fiabilité SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Bibliothèque de suivi des erreurs Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Bibliothèque d'emballage de polygones, développée par Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Liens en python pour libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Police"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icônes SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Déploiement d'applications sur multiples distributions Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Ouvrir un fichier de projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Se souvenir de mon choix"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Ouvrir comme projet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importer les modèles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Annuler ou conserver les modifications"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Vous avez personnalisé certains paramètres de profil.\n"
-"Souhaitez-vous conserver ces paramètres modifiés après avoir changé de profil ?\n"
-"Vous pouvez également annuler les modifications pour charger les valeurs par défaut de '%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Paramètres du profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Modifications actuelles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Toujours me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Annuler et ne plus me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Conserver et ne plus me demander"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Annuler les modifications"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Conserver les modifications"
+msgid "Open file(s)"
+msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Nous avons trouvé au moins un fichier de projet parmi les fichiers que vous avez sélectionnés. Vous ne pouvez ouvrir qu'un seul fichier de projet à la fois. Nous vous conseillons de n'importer que les modèles de ces fichiers. Souhaitez-vous continuer ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importer tout comme modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Enregistrer le projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrudeuse %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Ne pas afficher à nouveau le résumé du projet lors de l'enregistrement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Enregistrer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimer le modèle sélectionné avec %1"
-msgstr[1] "Imprimer les modèles sélectionnés avec %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Ouvrir un fichier de projet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ceci est un fichier de projet Cura. Souhaitez-vous l'ouvrir comme projet ou en importer les modèles ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Se souvenir de mon choix"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Ouvrir comme projet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importer les modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Sans titre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fichier"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bienvenue dans Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Modifier"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualisation"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Prise en main"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vide"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensions"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Aidez-nous à améliorer Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&références"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Aide"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Types de machines"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nouveau projet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilisation du matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Nombre de découpes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Paramètres d'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Plus d'informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Cette configuration n'est pas disponible car %1 n'est pas reconnu. Veuillez visiter %2 pour télécharger le profil matériel correct."
+msgid "Add printer by IP address"
+msgstr "Ajouter une imprimante par adresse IP"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Saisissez l'adresse IP de votre imprimante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Ajouter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marché en ligne"
+msgid "Could not connect to device."
+msgstr "Impossible de se connecter à l'appareil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Chargement des configurations disponibles à partir de l'imprimante..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Les configurations ne sont pas disponibles car l'imprimante est déconnectée."
+msgid "The printer at this address has not responded yet."
+msgstr "L'imprimante à cette adresse n'a pas encore répondu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Sélectionner la configuration"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Précédent"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Se connecter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurations"
+msgid "Add a printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personnalisé"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Ajouter une imprimante en réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Imprimante"
+msgid "Add a non-networked printer"
+msgstr "Ajouter une imprimante hors réseau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Activé"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Matériau"
+msgid "Add a Cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utiliser de la colle pour une meilleure adhérence avec cette combinaison de matériaux."
+msgid "Waiting for Cloud response"
+msgstr "En attente d'une réponse cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimer le modèle sélectionné avec :"
-msgstr[1] "Imprimer les modèles sélectionnés avec :"
+msgid "No printers found in your account?"
+msgstr "Aucune imprimante trouvée dans votre compte ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplier le modèle sélectionné"
-msgstr[1] "Multiplier les modèles sélectionnés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Ajouter l'imprimante manuellement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Nombre de copies"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Enregistrer le projet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "E&xporter..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exporter la sélection..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoris"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Ignorer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Générique"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Accord utilisateur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Imprimantes réseau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Décliner et fermer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Imprimantes locales"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Ouvrir un fichier &récent"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Im&primante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Rafraîchir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Ajouter une imprimante par IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Définir comme extrudeur actif"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Ajouter une imprimante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Activer l'extrudeuse"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Dépannage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Désactiver l'extrudeuse"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricant"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Auteur du profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nom de l'imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Veuillez nommer votre imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Dernière mise à jour : %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Compte Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Déconnexion"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Se connecter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Vérification en cours..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Compte synchronisé"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Un problème s'est produit..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Installer les mises à jour en attente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Rechercher des mises à jour de compte"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Liste d'objets"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Paramètres visibles"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Afficher le guide de dépannage en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Réduire toutes les catégories"
+msgid "Toggle Full Screen"
+msgstr "Passer en Plein écran"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gérer la visibilité des paramètres..."
+msgid "Exit Full Screen"
+msgstr "Quitter le mode plein écran"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Annuler"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Rétablir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Quitter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Position de la &caméra"
+msgid "3D View"
+msgstr "Vue 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vue de la caméra"
+msgid "Front View"
+msgstr "Vue de face"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspective"
+msgid "Top View"
+msgstr "Vue du dessus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthographique"
+msgid "Left Side View"
+msgstr "Vue latérale gauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Plateau"
+msgid "Right Side View"
+msgstr "Vue latérale droite"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Non connecté à une imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configurer Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "L'imprimante n'accepte pas les commandes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Ajouter une imprimante..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "En maintenance. Vérifiez l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Gérer les &imprimantes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Connexion avec l'imprimante perdue"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Gérer les matériaux..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Impression..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Ajouter d'autres matériaux du Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "En pause"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Mettre à jour le profil à l'aide des paramètres / forçages actuels"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Préparation..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Ignorer les modifications actuelles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Supprimez l'imprimante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Créer un profil à partir des paramètres / forçages actuels..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Gérer les profils..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Afficher la &documentation en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Notifier un &bug"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Quoi de neuf"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "À propos de..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Supprimer le modèle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ce&ntrer le modèle sur le plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Grouper les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Dégrouper les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Fusionner les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Multiplier le modèle..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Sélectionner tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Supprimer les objets du plateau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Recharger tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Réorganiser tous les modèles sur tous les plateaux"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Réorganiser tous les modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Réorganiser la sélection"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Réinitialiser toutes les positions des modèles"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Réinitialiser tous les modèles et transformations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Ouvrir le(s) fichier(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nouveau projet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Afficher le dossier de configuration"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurer la visibilité des paramètres..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marché en ligne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Paramètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Actuel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unité"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informations"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmer le changement de diamètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Abandonner l'impression"
+msgid "Display Name"
+msgstr "Afficher le nom"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
+msgid "Material Type"
+msgstr "Type de matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Est imprimé comme support."
+msgid "Color"
+msgstr "Couleur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
+msgid "Properties"
+msgstr "Propriétés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
+msgid "Density"
+msgstr "Densité"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
+msgid "Diameter"
+msgstr "Diamètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Remplace le paramètre %1."
-msgstr[1] "Remplace les paramètres %1."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Coût du filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Liste d'objets"
+msgid "Filament weight"
+msgstr "Poids du filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Longueur du filament"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Coût au mètre"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Délier le matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Description"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informations d'adhérence"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Créer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliquer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Imprimante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Confirmer la suppression"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importer un matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Matériau <filename>%1</filename> importé avec succès"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exporter un matériau"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Imprimantes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Renommer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profils"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Créer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Dupliquer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Créer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Veuillez fournir un nom pour ce profil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Dupliquer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Renommer le profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importer un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exporter un profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Imprimante : %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ce profil utilise les paramètres par défaut spécifiés par l'imprimante, de sorte qu'aucun paramètre / forçage n'apparaît dans la liste ci-dessous."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Vos paramètres actuels correspondent au profil sélectionné."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Paramètres généraux"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilité des paramètres"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Vérifier tout"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Général"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Devise :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thème :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Vous devez redémarrer l'application pour que ces changements prennent effet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Découper automatiquement si les paramètres sont modifiés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Découper automatiquement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportement Viewport"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Surligne les parties non supportées du modèle en rouge. Sans ajouter de support, ces zones ne s'imprimeront pas correctement."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mettre en surbrillance les porte-à-faux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Surlignez les surfaces du modèle manquantes ou étrangères en utilisant les signes d'avertissement. Les Toolpaths seront souvent les parties manquantes de la géométrie prévue."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Afficher les erreurs du modèle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Déplace la caméra afin que le modèle sélectionné se trouve au centre de la vue"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrer la caméra lorsqu'un élément est sélectionné"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Le comportement de zoom par défaut de Cura doit-il être inversé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverser la direction du zoom de la caméra."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Le zoom doit-il se faire dans la direction de la souris ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Le zoom vers la souris n'est pas pris en charge dans la perspective orthographique."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomer vers la direction de la souris"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être déplacés afin de ne plus se croiser ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Veillez à ce que les modèles restent séparés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Les modèles dans la zone d'impression doivent-ils être abaissés afin de toucher le plateau ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Abaisser automatiquement les modèles sur le plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Afficher le message d'avertissement dans le lecteur G-Code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Message d'avertissement dans le lecteur G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "La couche doit-elle être forcée en mode de compatibilité ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forcer l'affichage de la couche en mode de compatibilité (redémarrage requis)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Est-ce que Cura devrait ouvrir à l'endroit où il a été fermé ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurer la position de la fenêtre au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quel type de rendu de la caméra doit-il être utilisé?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendu caméra :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspective"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthographique"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Ouvrir et enregistrer des fichiers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "L'ouverture de fichiers à partir du bureau ou d'applications externes doit-elle se faire dans la même instance de Cura ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utiliser une seule instance de Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Les modèles doivent-ils être mis à l'échelle du volume d'impression s'ils sont trop grands ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Réduire la taille des modèles trop grands"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modèle peut apparaître en tout petit si son unité est par exemple en mètres plutôt qu'en millimètres. Ces modèles doivent-ils être agrandis ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Mettre à l'échelle les modèles extrêmement petits"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Les modèles doivent-ils être sélectionnés après leur chargement ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Sélectionner les modèles lorsqu'ils sont chargés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Un préfixe basé sur le nom de l'imprimante doit-il être automatiquement ajouté au nom de la tâche d'impression ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Ajouter le préfixe de la machine au nom de la tâche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Un résumé doit-il être affiché lors de l'enregistrement d'un fichier de projet ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Afficher la boîte de dialogue du résumé lors de l'enregistrement du projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportement par défaut lors de l'ouverture d'un fichier de projet : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Toujours me demander"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Toujours ouvrir comme projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Toujours importer les modèles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Lorsque vous apportez des modifications à un profil puis passez à un autre profil, une boîte de dialogue apparaît, vous demandant si vous souhaitez conserver les modifications. Vous pouvez aussi choisir une option par défaut, et le dialogue ne s'affichera plus."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportement par défaut pour les valeurs de paramètres modifiées lors du passage à un profil différent : "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Toujours rejeter les paramètres modifiés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Toujours transférer les paramètres modifiés dans le nouveau profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Confidentialité"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura doit-il vérifier les mises à jour au démarrage du programme ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Vérifier les mises à jour au démarrage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Les données anonymes de votre impression doivent-elles être envoyées à Ultimaker ? Notez qu'aucun modèle, aucune adresse IP ni aucune autre information permettant de vous identifier personnellement ne seront envoyés ou stockés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Envoyer des informations (anonymes) sur l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Plus d'informations"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Renommer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Créer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliquer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporter"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Confirmer la suppression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Êtes-vous sûr de vouloir supprimer l'objet %1 ? Vous ne pourrez pas revenir en arrière !"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importer un matériau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossible d'importer le matériau <filename>%1</filename> : <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type d'affichage"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Matériau <filename>%1</filename> importé avec succès"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Non connecté à une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exporter un matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "L'imprimante n'accepte pas les commandes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Échec de l'exportation de matériau vers <filename>%1</filename> : <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "En maintenance. Vérifiez l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Matériau exporté avec succès vers <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Connexion avec l'imprimante perdue"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informations"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Impression..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmer le changement de diamètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "En pause"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Le nouveau diamètre de filament est réglé sur %1 mm, ce qui n'est pas compatible avec l'extrudeuse actuelle. Souhaitez-vous poursuivre ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Préparation..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Afficher le nom"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Supprimez l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type de matériau"
+msgid "Abort Print"
+msgstr "Abandonner l'impression"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Couleur"
+msgid "Are you sure you want to abort the print?"
+msgstr "Êtes-vous sûr(e) de vouloir abandonner l'impression ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Propriétés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Paramètres de recherche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densité"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copier la valeur vers tous les extrudeurs"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diamètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Coût du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Poids du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Masquer ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Longueur du filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Afficher ce paramètre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Coût au mètre"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
+"\n"
+"Cliquez pour rendre ces paramètres visibles."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ce matériau est lié à %1 et partage certaines de ses propriétés."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Délier le matériau"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Touche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Description"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Touché par"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informations d'adhérence"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Créer"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Ce paramètre possède une valeur qui est différente du profil.\n"
+"\n"
+"Cliquez pour restaurer la valeur du profil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliquer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Créer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Veuillez fournir un nom pour ce profil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Dupliquer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Renommer le profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importer un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exporter un profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Imprimante : %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Mettre à jour le profil à l'aide des paramètres / forçages actuels"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Ignorer les modifications actuelles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ce profil utilise les paramètres par défaut spécifiés par l'imprimante, de sorte qu'aucun paramètre / forçage n'apparaît dans la liste ci-dessous."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Vos paramètres actuels correspondent au profil sélectionné."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Paramètres généraux"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Paramètre"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
+"\n"
+"Cliquez pour restaurer la valeur calculée."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vue 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Actuel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vue de face"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unité"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vue du dessus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilité des paramètres"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vue gauche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Vérifier tout"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vue droite"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extrudeuse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Température cible de l'extrémité chauffante. L'extrémité chauffante sera chauffée ou refroidie pour tendre vers cette température. Si la valeur est 0, le chauffage de l'extrémité chauffante sera coupé."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Température actuelle de cette extrémité chauffante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Température jusqu'à laquelle préchauffer l'extrémité chauffante."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Préchauffer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Préchauffez l'extrémité chauffante avant l'impression. Vous pouvez continuer l'ajustement de votre impression pendant qu'elle chauffe, ce qui vous évitera un temps d'attente lorsque vous serez prêt à lancer l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Couleur du matériau dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Matériau dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Buse insérée dans cet extrudeur."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Plateau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Température cible du plateau chauffant. Le plateau sera chauffé ou refroidi pour tendre vers cette température. Si la valeur est 0, le chauffage du plateau sera éteint."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Température actuelle du plateau chauffant."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Température jusqu'à laquelle préchauffer le plateau."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Préchauffez le plateau avant l'impression. Vous pouvez continuer à ajuster votre impression pendant qu'il chauffe, et vous n'aurez pas à attendre que le plateau chauffe lorsque vous serez prêt à lancer l'impression."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Contrôle de l'imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Position de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distance de coupe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Envoyer G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Envoyer une commande G-Code personnalisée à l'imprimante connectée. Appuyez sur « Entrée » pour envoyer la commande."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "L'imprimante n'est pas connectée."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Ajouter une imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gérer les imprimantes"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Imprimantes connectées"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Imprimantes préréglées"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Activer l'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Nom de la tâche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Durée d'impression"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Durée restante estimée"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n"
-"\n"
-"Cliquez pour ouvrir le gestionnaire de profils."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Personnaliser les profils"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Il n'y a pas de profil %1 pour la configuration dans l'extrudeur %2. L'intention par défaut sera utilisée à la place"
-msgstr[1] "Il n'y a pas de profil %1 pour les configurations dans les extrudeurs %2. L'intention par défaut sera utilisée à la place"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuration d'impression désactivée. Le fichier G-Code ne peut pas être modifié."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Recommandé"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personnalisé"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "On"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Off"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Expérimental"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Adhérence"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Activez l'impression d'une bordure ou plaquette (Brim/Raft). Cela ajoutera une zone plate autour de ou sous votre objet qui est facile à découper par la suite."
+msgid "Is printed as support."
+msgstr "Est imprimé comme support."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Remplissage graduel"
+msgid "Other models overlapping with this model are modified."
+msgstr "D'autres modèles qui se chevauchent avec ce modèle ont été modifiés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le haut."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Vous avez modifié certains paramètres du profil. Si vous souhaitez les modifier, allez dans le mode Personnaliser."
+msgid "Infill overlapping with this model is modified."
+msgstr "Le chevauchement de remplissage avec ce modèle a été modifié."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Support"
+msgid "Overlaps with this model are not supported."
+msgstr "Les chevauchements avec ce modèle ne sont pas pris en charge."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Générer des structures pour soutenir les parties du modèle qui possèdent des porte-à-faux. Sans ces structures, ces parties s'effondreront durant l'impression."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Remplace le paramètre %1."
+msgstr[1] "Remplace les paramètres %1."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n"
-"\n"
-"Cliquez pour rendre ces paramètres visibles."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marché en ligne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Ce paramètre n'est pas utilisé car tous les paramètres qu'il influence sont remplacés."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Modifier"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Touche"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensions"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Touché par"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&références"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Ce paramètre est toujours partagé par toutes les extrudeuses. Le modifier ici entraînera la modification de la valeur pour toutes les extrudeuses."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Aide"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Ce paramètre est résolu à partir de valeurs conflictuelles spécifiques à l'extrudeur :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nouveau projet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Ce paramètre possède une valeur qui est différente du profil.\n"
-"\n"
-"Cliquez pour restaurer la valeur du profil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Êtes-vous sûr(e) de souhaiter lancer un nouveau projet ? Cela supprimera les objets du plateau ainsi que tous paramètres non enregistrés."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n"
-"\n"
-"Cliquez pour restaurer la valeur calculée."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Paramètres de recherche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copier la valeur vers tous les extrudeurs"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copier toutes les valeurs modifiées vers toutes les extrudeuses"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Masquer ce paramètre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Masquer ce paramètre"
+msgid "This package will be installed after restarting."
+msgstr "Ce paquet sera installé après le redémarrage."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Afficher ce paramètre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Paramètres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vue 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Fermeture de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vue de face"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Voulez-vous vraiment quitter %1 ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vue du dessus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Installer le paquet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vue gauche"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Ouvrir le(s) fichier(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vue droite"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Nous avons trouvé au moins un fichier G-Code parmi les fichiers que vous avez sélectionné. Vous ne pouvez ouvrir qu'un seul fichier G-Code à la fois. Si vous souhaitez ouvrir un fichier G-Code, veuillez ne sélectionner qu'un seul fichier de ce type."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type d'affichage"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Ajouter une imprimante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Quoi de neuf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "En attente d'une réponse cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "L'imprimante cloud est hors ligne. Veuillez vérifier si l'imprimante est activée et connectée à Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Aucune imprimante trouvée dans votre compte ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Cette imprimante n'est pas associée à votre compte. Veuillez visiter l'Ultimaker Digital Factory pour établir une connexion."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Les imprimantes suivantes de votre compte ont été ajoutées à Cura :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vous connecter pour connecter l'imprimante cloud."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Ajouter l'imprimante manuellement"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La connexion cloud est actuellement indisponible. Veuillez vérifier votre connexion Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "Fin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricant"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Auteur du profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nom de l'imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Veuillez nommer votre imprimante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "Ajouter une imprimante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Ajouter une imprimante en réseau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Ajouter une imprimante hors réseau"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Aucune imprimante n'a été trouvée sur votre réseau."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Gérer les imprimantes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Rafraîchir"
+msgid "Connected printers"
+msgstr "Imprimantes connectées"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Ajouter une imprimante par IP"
+msgid "Preset printers"
+msgstr "Imprimantes préréglées"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Ajouter une imprimante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimer le modèle sélectionné avec %1"
+msgstr[1] "Imprimer les modèles sélectionnés avec %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Dépannage"
+msgid "Time estimation"
+msgstr "Estimation de durée"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Ajouter une imprimante par adresse IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Saisissez l'adresse IP de votre imprimante."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Ajouter"
+msgid "Material estimation"
+msgstr "Estimation du matériau"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Impossible de se connecter à l'appareil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Impossible de vous connecter à votre imprimante Ultimaker ?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "L'imprimante à cette adresse n'a pas encore répondu."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Découpe en cours..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Cette imprimante ne peut pas être ajoutée parce qu'il s'agit d'une imprimante inconnue ou de l'hôte d'un groupe."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Impossible de découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Précédent"
+msgid "Processing"
+msgstr "Traitement"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Se connecter"
+msgid "Slice"
+msgstr "Découper"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Compte Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Votre clé pour une impression 3D connectée"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Augmentez l'efficacité avec un flux de travail à distance sur les imprimantes Ultimaker"
+msgid "Start the slicing process"
+msgstr "Démarrer le processus de découpe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Ignorer"
+msgid "Cancel"
+msgstr "Annuler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Aidez-nous à améliorer Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Aucune estimation de la durée n'est disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura recueille des données anonymes pour améliorer la qualité d'impression et l'expérience utilisateur, notamment :"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Aucune estimation des coûts n'est disponible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Types de machines"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Aperçu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilisation du matériau"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Permet le branchement hot-plug et l'écriture sur lecteur amovible."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Nombre de découpes"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Plugin de périphérique de sortie sur disque amovible"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Paramètres d'impression"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Les données recueillies par Ultimaker Cura ne contiendront aucun renseignement personnel."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Mise à niveau de 3.5 vers 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Plus d'informations"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vide"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Mise à niveau de 4.6.2 vers 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Accord utilisateur"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Décliner et fermer"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Mise à niveau de 2.2 vers 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bienvenue dans Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Veuillez suivre ces étapes pour configurer\n"
-"Ultimaker Cura. Cela ne prendra que quelques instants."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Mise à jour de 4.2 vers 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Prise en main"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Mises à niveau des configurations de Cura 4.6.0 vers Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Quoi de neuf dans Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Mise à niveau de 4.6.0 vers 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Contrôleur de modèle"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Mise à niveau de version, de 3.0 vers 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lecteur 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Mise à niveau de 4.0 vers 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Permet l'écriture de fichiers 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Générateur 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Mise à niveau de 2.6 vers 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lecteur AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Mise à niveau de 2.5 vers 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Sauvegardez et restaurez votre configuration."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Sauvegardes Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Mise à jour de 4.1 vers 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Système CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Mise à niveau vers 2.1 vers 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fournit la prise en charge de l'importation de profils Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lecteur de profil Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Mise à niveau de 3.2 vers 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Fournit la prise en charge de l'exportation de profils Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Générateur de profil Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Mise à niveau de 4.5 vers 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Vérifie les mises à jour du firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Vérificateur des mises à jour du firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Mise à niveau de 4.4 vers 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Programme de mise à jour du firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Mise à niveau de 4.7 vers 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Lit le G-Code à partir d'une archive compressée."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lecteur G-Code compressé"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Mise à niveau de 3.3 vers 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Enregistre le G-Code dans une archive compressée."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Générateur de G-Code compressé"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Mise à niveau de 4.3 vers 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lecteur de profil G-Code"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Mise à niveau de 3.4 vers 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permet le chargement et l'affichage de fichiers G-Code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lecteur G-Code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Mise à niveau de version, de 2.7 vers 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Enregistre le G-Code dans un fichier."
+msgid "Provides support for reading AMF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Générateur de G-Code"
+msgid "AMF Reader"
+msgstr "Lecteur AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de fichiers g-code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lecteur d'images"
+msgid "G-code Profile Reader"
+msgstr "Lecteur de profil G-Code"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Fournit à une machine des actions permettant la mise à jour du firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lecteur de profil Cura antérieur"
+msgid "Firmware Updater"
+msgstr "Programme de mise à jour du firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
+msgid "Provides support for reading X3D files."
+msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Action Paramètres de la machine"
+msgid "X3D Reader"
+msgstr "Lecteur X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fournit une étape de surveillance dans Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Étape de surveillance"
+msgid "Toolbox"
+msgstr "Boîte à outils"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5472,75 +5725,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Post-traitement"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fournit une étape de préparation dans Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fournit le lien vers l'arrière du système de découpage CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Étape de préparation"
+msgid "CuraEngine Backend"
+msgstr "Système CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fournit une étape de prévisualisation dans Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Étape de prévisualisation"
+msgid "USB printing"
+msgstr "Impression par USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Permet le branchement hot-plug et l'écriture sur lecteur amovible."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Fournit la prise en charge de l'exportation de profils Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Plugin de périphérique de sortie sur disque amovible"
+msgid "Cura Profile Writer"
+msgstr "Générateur de profil Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Journal d'événements dans Sentry"
+msgid "Ultimaker Network Connection"
+msgstr "Connexion réseau Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Fournit la Vue simulation."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vue simulation"
+msgid "Ultimaker machine actions"
+msgstr "Actions de la machine Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
+msgid "Provides support for reading 3MF files."
+msgstr "Fournit la prise en charge de la lecture de fichiers 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Information sur le découpage"
+msgid "3MF Reader"
+msgstr "Lecteur 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Affiche une vue en maille solide normale."
+msgid "Writes g-code to a compressed archive."
+msgstr "Enregistre le G-Code dans une archive compressée."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Vue solide"
+msgid "Compressed G-code Writer"
+msgstr "Générateur de G-Code compressé"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Lit le G-Code à partir d'une archive compressée."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lecteur G-Code compressé"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Vérifie les modèles et la configuration de l'impression pour déceler d'éventuels problèmes d'impression et donne des suggestions."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Contrôleur de modèle"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Vérifie les mises à jour du firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Vérificateur des mises à jour du firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Permet le chargement et l'affichage de fichiers G-Code."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Lecteur G-Code"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5552,16 +5845,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Effaceur de support"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Rechercher, gérer et installer de nouveaux paquets Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Boîte à outils"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5572,6 +5855,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Lecteur de Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Enregistre certains événements afin qu'ils puissent être utilisés par le rapporteur d'incident"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Journal d'événements dans Sentry"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5582,265 +5875,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Lecteur UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Générateur UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Fournit les actions de la machine pour les machines Ultimaker (telles que l'assistant de calibration du plateau, sélection des mises à niveau, etc.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Fournit la prise en charge de l'importation de profils à partir de versions Cura antérieures."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Actions de la machine Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lecteur de profil Cura antérieur"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gère les connexions réseau vers les imprimantes Ultimaker en réseau."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fournit une étape de préparation dans Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Connexion réseau Ultimaker"
+msgid "Prepare Stage"
+msgstr "Étape de préparation"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Accepte les G-Code et les envoie à une imprimante. Ce plugin peut aussi mettre à jour le firmware."
+msgid "Provides a monitor stage in Cura."
+msgstr "Fournit une étape de surveillance dans Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impression par USB"
+msgid "Monitor Stage"
+msgstr "Étape de surveillance"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Configurations des mises à niveau de Cura 2.1 vers Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Permet la vue Rayon-X."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Mise à niveau vers 2.1 vers 2.2"
+msgid "X-Ray View"
+msgstr "Vue Rayon-X"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Configurations des mises à niveau de Cura 2.2 vers Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Permet l'écriture de fichiers 3MF."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Mise à niveau de 2.2 vers 2.4"
+msgid "3MF Writer"
+msgstr "Générateur 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Configurations des mises à niveau de Cura 2.5 vers Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envoie des informations anonymes sur le découpage. Peut être désactivé dans les préférences."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Mise à niveau de 2.5 vers 2.6"
+msgid "Slice info"
+msgstr "Information sur le découpage"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Configurations des mises à niveau de Cura 2.6 vers Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Fournit une étape de prévisualisation dans Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Mise à niveau de 2.6 vers 2.7"
+msgid "Preview Stage"
+msgstr "Étape de prévisualisation"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Fournit la Vue simulation."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Mise à niveau de version, de 2.7 vers 3.0"
+msgid "Simulation View"
+msgstr "Vue simulation"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Met à niveau les configurations, de Cura 3.0 vers Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Permet de modifier les paramètres de la machine (tels que volume d'impression, taille de buse, etc.)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Mise à niveau de version, de 3.0 vers 3.1"
+msgid "Machine Settings Action"
+msgstr "Action Paramètres de la machine"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Configurations des mises à niveau de Cura 3.2 vers Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Mise à niveau de 3.2 vers 3.3"
+msgid "Material Profiles"
+msgstr "Profils matériels"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Configurations des mises à niveau de Cura 3.3 vers Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Affiche une vue en maille solide normale."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Mise à niveau de 3.3 vers 3.4"
+msgid "Solid View"
+msgstr "Vue solide"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Configurations des mises à niveau de Cura 3.4 vers Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fournit la prise en charge de l'importation de profils Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Mise à niveau de 3.4 vers 3.5"
+msgid "Cura Profile Reader"
+msgstr "Lecteur de profil Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Configurations des mises à niveau de Cura 3.5 vers Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permet l'écriture de fichiers Ultimaker Format Package."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Mise à niveau de 3.5 vers 4.0"
+msgid "UFP Writer"
+msgstr "Générateur UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Configurations des mises à niveau de Cura 4.0 vers Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Enregistre le G-Code dans un fichier."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Mise à niveau de 4.0 vers 4.1"
+msgid "G-code Writer"
+msgstr "Générateur de G-Code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Configurations des mises à jour de Cura 4.1 vers Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Permet de générer une géométrie imprimable à partir de fichiers d'image 2D."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Mise à jour de 4.1 vers 4.2"
+msgid "Image Reader"
+msgstr "Lecteur d'images"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Configurations des mises à jour de Cura 4.2 vers Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Sauvegardez et restaurez votre configuration."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Mise à jour de 4.2 vers 4.3"
+msgid "Cura Backups"
+msgstr "Sauvegardes Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Configurations des mises à niveau de Cura 4.3 vers Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Il manque la pile globale."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Mise à niveau de 4.3 vers 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Votre modèle n'est pas fonctionnel. Les zones surlignées indiquent que des surfaces manquent ou sont étrangères."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Configurations des mises à niveau de Cura 4.4 vers Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Erreurs du modèle"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Mise à niveau de 4.4 vers 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Épaisseur de la couche"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Mises à niveau des configurations de Cura 4.5 vers Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Votre clé pour une impression 3D connectée"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Mise à niveau de 4.5 vers 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins\n"
+#~ "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où\n"
+#~ "- Augmentez l'efficacité grâce à un flux de travail à distance sur les imprimantes Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Mises à niveau des configurations de Cura 4.6.0 vers Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Créer un compte"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Mise à niveau de 4.6.0 vers 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Supprimer le modèle sélectionné"
+#~ msgstr[1] "Supprimer les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Mises à niveau des configurations de Cura 4.6.2 vers Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centrer le modèle sélectionné"
+#~ msgstr[1] "Centrer les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Mise à niveau de 4.6.2 vers 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Multiplier le modèle sélectionné"
+#~ msgstr[1] "Multiplier les modèles sélectionnés"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Mises à niveau des configurations de Cura 4.7 vers Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Fin"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Mise à niveau de 4.7 vers 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Compte Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fournit la prise en charge de la lecture de fichiers X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Votre clé pour une impression 3D connectée"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lecteur X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personnalisez votre expérience avec plus de profils d'impression et de plug-ins"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Offre la possibilité de lire et d'écrire des profils matériels basés sur XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Restez flexible en synchronisant votre configuration et en la chargeant n'importe où"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profils matériels"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Augmentez l'efficacité avec un flux de travail à distance sur les imprimantes Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Permet la vue Rayon-X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Veuillez suivre ces étapes pour configurer\n"
+#~ "Ultimaker Cura. Cela ne prendra que quelques instants."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vue Rayon-X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Quoi de neuf dans Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/fr_FR/fdmextruder.def.json.po b/resources/i18n/fr_FR/fdmextruder.def.json.po
index a683a21495..da9486c18c 100644
--- a/resources/i18n/fr_FR/fdmextruder.def.json.po
+++ b/resources/i18n/fr_FR/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: French\n"
diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po
index 646c0c9af8..d9214ccecd 100644
--- a/resources/i18n/fr_FR/fdmprinter.def.json.po
+++ b/resources/i18n/fr_FR/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: French <info@lionbridge.com>, French <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Si les extrudeurs partagent un seul chauffage au lieu que chaque extrudeur ait son propre chauffage."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Zones interdites"
@@ -486,8 +506,8 @@ msgstr "Décalage avec extrudeuse"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Appliquer le décalage de l'extrudeuse au système de coordonnées."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Multiplicateur de la largeur de la ligne sur la première couche. Augmen
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Coque"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Distance d'un déplacement inséré après la paroi extérieure, pour mieux masquer la jointure en Z."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extrudeuse de couche extérieure de la surface supérieure"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Le train d'extrudeuse utilisé pour l'impression de la couche extérieure supérieure. Cela est utilisé en multi-extrusion."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Couches extérieures de la surface supérieure"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Nombre de couches extérieures supérieures. En général, une seule couche supérieure est suffisante pour générer des surfaces supérieures de qualité."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extrudeuse du dessus/dessous"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Le train d'extrudeuse utilisé pour l'impression de la couche extérieure du haut et du bas. Cela est utilisé en multi-extrusion."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Épaisseur du dessus/dessous"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "L’épaisseur des couches du dessus/dessous dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessus/dessous."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Épaisseur du dessus"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "L’épaisseur des couches du dessus dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessus."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Couches supérieures"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Le nombre de couches supérieures. Lorsqu'elle est calculée par l'épaisseur du dessus, cette valeur est arrondie à un nombre entier."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Épaisseur du dessous"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "L’épaisseur des couches du dessous dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessous."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Couches inférieures"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Le nombre de couches inférieures. Lorsqu'elle est calculée par l'épaisseur du dessous, cette valeur est arrondie à un nombre entier."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Couches inférieures initiales"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Le nombre de couches inférieures initiales à partir du haut du plateau. Lorsqu'elle est calculée par l'épaisseur du dessous, cette valeur est arrondie à un nombre entier."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Motif du dessus/dessous"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Le motif des couches du dessus/dessous."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Lignes"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concentrique"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Couche initiale du motif du dessous"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Motif au bas de l'impression sur la première couche."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Lignes"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concentrique"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Relier les polygones supérieurs / inférieurs"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Relier les voies de couche extérieure supérieures / inférieures lorsqu'elles sont côte à côte. Pour le motif concentrique, ce paramètre réduit considérablement le temps de parcours, mais comme les liens peuvent se trouver à mi-chemin sur le remplissage, cette fonctionnalité peut réduire la qualité de la surface supérieure."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Sens de la ligne du dessus / dessous"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Une liste de sens de ligne (exprimés en nombres entiers) à utiliser lorsque les couches du haut / bas utilisent le motif en lignes ou en zig zag. Les éléments de la liste sont utilisés de manière séquentielle à mesure de l'avancement des couches. La liste reprend depuis le début lorsque la fin est atteinte. Les éléments de la liste sont séparés par des virgules et la liste entière est encadrée entre crochets. La valeur par défaut est une liste vide, ce qui signifie que les angles traditionnels par défaut seront utilisés (45 et 135 degrés)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Insert de paroi externe"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Si cette option est activée, les coordonnées de la jointure z sont relatives au centre de chaque partie. Si elle est désactivée, les coordonnées définissent une position absolue sur le plateau."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extrudeuse de couche extérieure de la surface supérieure"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Le train d'extrudeuse utilisé pour l'impression de la couche extérieure supérieure. Cela est utilisé en multi-extrusion."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Couches extérieures de la surface supérieure"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Nombre de couches extérieures supérieures. En général, une seule couche supérieure est suffisante pour générer des surfaces supérieures de qualité."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extrudeuse du dessus/dessous"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Le train d'extrudeuse utilisé pour l'impression de la couche extérieure du haut et du bas. Cela est utilisé en multi-extrusion."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Épaisseur du dessus/dessous"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "L’épaisseur des couches du dessus/dessous dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessus/dessous."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Épaisseur du dessus"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "L’épaisseur des couches du dessus dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessus."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Couches supérieures"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Le nombre de couches supérieures. Lorsqu'elle est calculée par l'épaisseur du dessus, cette valeur est arrondie à un nombre entier."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Épaisseur du dessous"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "L’épaisseur des couches du dessous dans l'impression. Cette valeur divisée par la hauteur de la couche définit le nombre de couches du dessous."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Couches inférieures"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Le nombre de couches inférieures. Lorsqu'elle est calculée par l'épaisseur du dessous, cette valeur est arrondie à un nombre entier."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Couches inférieures initiales"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Le nombre de couches inférieures initiales à partir du haut du plateau. Lorsqu'elle est calculée par l'épaisseur du dessous, cette valeur est arrondie à un nombre entier."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Motif du dessus/dessous"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Le motif des couches du dessus/dessous."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Lignes"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concentrique"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Couche initiale du motif du dessous"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Motif au bas de l'impression sur la première couche."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Lignes"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concentrique"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Relier les polygones supérieurs / inférieurs"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Relier les voies de couche extérieure supérieures / inférieures lorsqu'elles sont côte à côte. Pour le motif concentrique, ce paramètre réduit considérablement le temps de parcours, mais comme les liens peuvent se trouver à mi-chemin sur le remplissage, cette fonctionnalité peut réduire la qualité de la surface supérieure."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Sens de la ligne du dessus / dessous"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Une liste de sens de ligne (exprimés en nombres entiers) à utiliser lorsque les couches du haut / bas utilisent le motif en lignes ou en zig zag. Les éléments de la liste sont utilisés de manière séquentielle à mesure de l'avancement des couches. La liste reprend depuis le début lorsque la fin est atteinte. Les éléments de la liste sont séparés par des virgules et la liste entière est encadrée entre crochets. La valeur par défaut est une liste vide, ce qui signifie que les angles traditionnels par défaut seront utilisés (45 et 135 degrés)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Aucune couche dans les trous en Z"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Ajuster le degré de chevauchement entre les parois et les (extrémités des) lignes centrales de la couche extérieure. Un chevauchement léger permet de relier fermement les parois à la couche extérieure. Notez que, si la largeur de la couche extérieure est égale à celle de la ligne de la paroi, une valeur supérieure à la moitié de la largeur de la paroi peut déjà faire dépasser la couche extérieure de la paroi, car dans ce cas la position de la buse de l'extrudeuse peut déjà atteindre le milieu de la paroi."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Largeur de retrait de la couche extérieure"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "La plus grande largeur des zones de la couche extérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure/inférieure sur les surfaces obliques du modèle."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Largeur de retrait de la couche extérieure supérieure"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "La plus grande largeur des zones de la couche extérieure supérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure sur les surfaces obliques du modèle."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Largeur de retrait de la couche extérieure inférieure"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "La plus grande largeur des zones de la couche extérieure inférieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure inférieure sur les surfaces obliques du modèle."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Distance d'expansion de la couche extérieure"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "La distance à laquelle les couches extérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois des couches voisines. Des valeurs faibles économisent la quantité de matériau utilisé."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Distance d'expansion de la couche extérieure supérieure"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "La distance à laquelle les couches extérieures supérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche supérieure. Des valeurs faibles économisent la quantité de matériau utilisé."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Distance d'expansion de la couche extérieure inférieure"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "La distance à laquelle les couches extérieures inférieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche inférieure. Des valeurs faibles économisent la quantité de matériau utilisé."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Angle maximum de la couche extérieure pour l'expansion"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Largeur minimum de la couche extérieure pour l'expansion"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Les zones de couche extérieure plus étroites que cette valeur ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une pente proche de la verticale."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Remplissage"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Angle minimal des porte-à-faux internes pour lesquels le remplissage est ajouté. À une valeur de 0°, les objets sont totalement remplis, 90° ne fournira aucun remplissage."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Largeur de retrait de la couche extérieure"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "La plus grande largeur des zones de la couche extérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure/inférieure sur les surfaces obliques du modèle."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Largeur de retrait de la couche extérieure supérieure"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "La plus grande largeur des zones de la couche extérieure supérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure sur les surfaces obliques du modèle."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Largeur de retrait de la couche extérieure inférieure"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "La plus grande largeur des zones de la couche extérieure inférieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure inférieure sur les surfaces obliques du modèle."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Distance d'expansion de la couche extérieure"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "La distance à laquelle les couches extérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois des couches voisines. Des valeurs faibles économisent la quantité de matériau utilisé."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Distance d'expansion de la couche extérieure supérieure"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "La distance à laquelle les couches extérieures supérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche supérieure. Des valeurs faibles économisent la quantité de matériau utilisé."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Distance d'expansion de la couche extérieure inférieure"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "La distance à laquelle les couches extérieures inférieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche inférieure. Des valeurs faibles économisent la quantité de matériau utilisé."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Angle maximum de la couche extérieure pour l'expansion"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Les couches extérieures supérieures / inférieures des surfaces supérieures et / ou inférieures de votre objet possédant un angle supérieur à ce paramètre ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une pente proche de la verticale. Un angle de 0° est horizontal, et un angle de 90° est vertical."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Largeur minimum de la couche extérieure pour l'expansion"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Les zones de couche extérieure plus étroites que cette valeur ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une pente proche de la verticale."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Épaisseur de soutien des bords de la couche"
@@ -2071,8 +2101,7 @@ msgstr "Température du plateau couche initiale"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr "Température utilisée pour le plateau de fabrication chauffé à la première couche. Si elle est définie sur 0, le plateau de fabrication ne sera pas chauffé"
-" lors de la première couche."
+msgstr "Température utilisée pour le plateau de fabrication chauffé à la première couche. Si elle est définie sur 0, le plateau de fabrication ne sera pas chauffé lors de la première couche."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2561,8 +2590,8 @@ msgstr "Vitesse de la couche initiale"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "La vitesse de la couche initiale. Une valeur plus faible est recommandée pour améliorer l'adhérence au plateau."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,10 +5104,8 @@ msgstr "Rang de traitement du maillage"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Détermine la priorité de cette maille lorsque plusieurs chevauchements de mailles de remplissage sont pris en considération. Les zones comportant plusieurs"
-" chevauchements de mailles de remplissage prendront en compte les paramètres du maillage ayant l'ordre le plus bas. Une maille de remplissage possédant"
-" un ordre plus élevé modifiera le remplissage des mailles de remplissage ayant un ordre plus bas et des mailles normales."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5426,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "L'angle maximal des porte-à-faux après qu'ils aient été rendus imprimables. À une valeur de 0°, tous les porte-à-faux sont remplacés par une pièce de modèle rattachée au plateau, tandis que 90° ne changera en rien le modèle."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Activer la roue libre"
@@ -6364,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matrice de transformation à appliquer au modèle lors de son chargement depuis le fichier."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Appliquer le décalage de l'extrudeuse au système de coordonnées."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Coque"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Les couches extérieures supérieures / inférieures des surfaces supérieures et / ou inférieures de votre objet possédant un angle supérieur à ce paramètre ne seront pas étendues. Cela permet d'éviter d'étendre les zones de couche extérieure étroites qui sont créées lorsque la surface du modèle possède une pente proche de la verticale. Un angle de 0° est horizontal, et un angle de 90° est vertical."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "La vitesse de la couche initiale. Une valeur plus faible est recommandée pour améliorer l'adhérence au plateau."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Détermine la priorité de cette maille lorsque plusieurs chevauchements de mailles de remplissage sont pris en considération. Les zones comportant plusieurs chevauchements de mailles de remplissage prendront en compte les paramètres du maillage ayant l'ordre le plus bas. Une maille de remplissage possédant un ordre plus élevé modifiera le remplissage des mailles de remplissage ayant un ordre plus bas et des mailles normales."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Température utilisée pour le plateau chauffant. Si elle est définie sur 0, la température du plateau ne sera pas ajustée."
diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po
index 8d33d009f0..9bcc1e16ca 100644
--- a/resources/i18n/hu_HU/cura.po
+++ b/resources/i18n/hu_HU/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-03-24 09:36+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: ATI-SZOFT\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.2.4\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Ismeretlen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Elérhető hálózati nyomtatók"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nincs felülírva"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Gépek betöltése ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Felület beállítása..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interfészek betöltése..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Figyelem"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Hiba"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Egyedi anyag"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Egyedi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Ismeretlen"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Egyéni profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Összes támasz típus ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Minden fájl (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Sikertelen bejelentkezés"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Új hely keresése az objektumokhoz"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Hely keresés"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nincs elég hely az összes objektum építési térfogatához"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nem találok helyet"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Biztonsági mentés"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Elérhető hálózati nyomtatók"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Építési térfogat"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nincs felülírva"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "A Cura nem tud elindulni"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Hibajelentés küldése az Ultimaker -nek"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Hibajelentés részletei"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Konfigurációs mappa megnyitása"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Konfiguráció biztonsági mentés és visszaállítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Összeomlás jelentés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1120 +249,776 @@ msgstr ""
 "            <p>Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához,  így az automatikusan a szerverünkre kerül.</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Rendszer információ"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Ismeretlen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Felület"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Még nincs inicializálva<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL Verzió: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL terjesztő: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Hibakövetés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Naplók"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Jelentés küldés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Gépek betöltése ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Felület beállítása..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interfészek betöltése..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Figyelem"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Hiba"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Tárgyak többszörözése és elhelyezése"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Tárgyak elhelyezése"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Tárgy elhelyezése"
+msgid "Login failed"
+msgstr "Sikertelen bejelentkezés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Nincs olvasható válasz."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "A fájl már létezik"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "A <filename>{0}</filename> fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Érvénytelen fájl URL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Fúvóka"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Beállítások frissítve"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(ek) kikapcsolva"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "A profil exportálása nem sikerült <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "A profil exportálása nem sikerült <filename>{0}</filename>:Az író beépülő modul hibát jelez."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil exportálva ide: <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Sikeres export"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Sikertelen profil importálás <filename>{0}</filename>: {1} -ból"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Nem importálható a profil <filename>{0}</filename> -ból, mielőtt hozzá nem adunk egy nyomtatót."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Nincs egyéni profil a <filename>{0}</filename> fájlban, amelyet importálni lehetne"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "A profil importálása nem sikerült <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Ez a <filename>{0}</filename> profil helytelen adatokat tartamaz, ezért nem importálható."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Nem importálható a profil <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "A {0} fájl nem tartalmaz érvényes profilt."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Egyedi profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Hiányzik a profil minőségi típusa."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Nem támogatott"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Fúvóka"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Új hely keresése az objektumokhoz"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Beállítások frissítve"
+msgid "Finding Location"
+msgstr "Hely keresés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nincs elég hely az összes objektum építési térfogatához"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(ek) kikapcsolva"
+msgid "Can't Find Location"
+msgstr "Nem találok helyet"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Hozzáad"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Csoport #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Finish"
+msgid "Skip"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Elvet"
+msgid "Close"
+msgstr "Bezár"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Csoport #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Következő"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Külső fal"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Belső falak"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Héj"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Kitöltés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Támasz kitöltés"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Támasz interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Támasz"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Szoknya"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Elsődleges torony"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Átmozgás"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Visszahúzás"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Egyéb"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Következő"
+msgid "Add"
+msgstr "Hozzáad"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Bezár"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-s modellsegéd"
+msgid "Cancel"
+msgstr "Elvet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projekt fájl megnyitása"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Egyedi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Hiba a 3mf fájl írásakor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura projekt 3MF fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF fájl"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Biztonsági mentések"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Hiba történt a biztonsági mentés feltöltése közben."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "A biztonsági mentés feltöltése ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "A biztonsági mentés feltöltése befejeződött."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Hiba történt a biztonsági másolat visszaállításakor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Bitonsági mentések kezelése"
+msgid "Build Volume"
+msgstr "Építési térfogat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nem lehet szeletelni"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen."
+msgid "Backup"
+msgstr "Biztonsági mentés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Réteg feldolgozás"
+msgid "Multiplying and placing objects"
+msgstr "Tárgyak többszörözése és elhelyezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Információ"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nem sikerült elérni a frissítési információkat."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Új %s firmware elérhető"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Hogyan frissíts"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware frissítés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Tömörített G-kód fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code Fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-kód elemzés"
+msgid "Placing Objects"
+msgstr "Tárgyak elhelyezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-kód részletek"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G fájl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Készítse elő a G-kódot az exportálás előtt."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG kép"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG kép"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG kép"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP kép"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF kép"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Gép beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Modellenkénti beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Modellenkénti beállítások konfigurálása"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Utólagos műveletek"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-kód módosítás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Előkészítés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Előnézet"
+msgid "Placing Object"
+msgstr "Tárgy elhelyezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Mentés külső meghajtóra"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Mentés külső meghajtóra {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Nincsenek elérhető fájlformátumok az íráshoz!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Mentés külső meghajóra <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Mentés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Sikertelen mentés <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Nem található a fájlnév {device} -on az írási művelethez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Sikertelen mentés a {0}: {1} meghajtóra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Mentve a {0} meghajtóra, mint {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Fájl Mentve"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Leválaszt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "{0} meghajtó leválasztása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} leválasztva. Eltávolíthatod az adathordozót."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardver biztonságos eltávolítása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "{0} leválasztása sikertelen. A meghajtó használatban van."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Cserélhető meghajtó"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Szimuláció nézet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Réteg nézet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Felület nézet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Támasz blokkoló"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr ""
+msgid "AMF File"
+msgstr "AMF fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code Fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Elfogadás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Kiegészítő licencszerződés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA digitális eszközcsere"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Modellenkénti beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Bináris"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Modellenkénti beállítások konfigurálása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF beágyazott JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Utólagos műveletek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford háromszög formátum"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-kód módosítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Tömörített COLLADA digitális eszközcsere"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker formátumcsomag"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Nem lehet szeletelni"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Tárgyasztal szint"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Válassz frissítést"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
+msgid "Processing Layers"
+msgstr "Réteg feldolgozás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Információ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB nyomtatás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Nyomtatás USB-ről"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Nyomtatás USB-ről"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Csatlakozás USB-n"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Nyomtatás folyamatban"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Hálózati csatlakozás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1357,71 +1026,71 @@ msgid_plural "... and {0} others"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1433,4157 +1102,4594 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Küldjön és felügyeljen nyomtatási feladatokat bárhonnan az Ultimaker fiókjával."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Kezdjük el"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
+msgid "tomorrow"
+msgstr "holnap"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Frissítse a nyomtatót"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "ma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
+msgid "Sending Print Job"
+msgstr "Nyomtatási feladat küldése"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Anyagok küldése a nyomtatóra"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Nem csoport"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Csoport konfiguráció"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Küldjön és felügyeljen nyomtatási feladatokat bárhonnan az Ultimaker fiókjával."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Kezdjük el"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Nyomtatási hiba"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Hálózati hiba"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Nyomtatási feladat küldése"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Anyagok küldése a nyomtatóra"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Adatok elküldve"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Frissítse a nyomtatót"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Hálózati nyomtatás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Hálózati nyomtatás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Csatlakozva hálózaton keresztül"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Hálózati csatlakozás"
+msgid "Select upgrades"
+msgstr "Válassz frissítést"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "holnap"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Tárgyasztal szint"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "ma"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Ajánlott"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB nyomtatás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Egyedi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Nyomtatás USB-ről"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Nyomtatás USB-ről"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projekt fájl megnyitása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Csatlakozás USB-n"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Nyomtatás folyamatban"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Fájl"
+msgid "3MF File"
+msgstr "3MF fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen nézet"
+msgid "Compressed G-code File"
+msgstr "Tömörített G-kód fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Projekt megnyitása"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-s modellsegéd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 msgstr ""
+"<p>Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nem sikerült elérni a frissítési információkat."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Összegzés - Cura Project"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Új %s firmware elérhető"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Nyomtató beállítások"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Hogyan frissíts"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Típus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-kód elemzés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Nyomtató csoport"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-kód részletek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profil beállítások"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Támasz blokkoló"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Név"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nincs a profilban"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA digitális eszközcsere"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 felülírás"
-msgstr[1] "%1 felülírás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Bináris"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Származék"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF beágyazott JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 felülírás"
-msgstr[1] "%1, %2 felülírás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford háromszög formátum"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Alapanyag beállítások"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Tömörített COLLADA digitális eszközcsere"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker formátumcsomag"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Beállítások láthatósága"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mód"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Előkészítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Látható beállítások:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 %2 -ből"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Hiba a 3mf fájl írásakor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Megnyitás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Többet szeretnél?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura projekt 3MF fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Biztonsági mentés most"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatikus biztonsági mentés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Visszaállítás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Előnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Biztonsági mentés törlés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Réteg nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Helyreállítás biztonsági mentésből"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Szimuláció nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura verzió"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Gépek"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Alapanyagok"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Gép beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profilok"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Felület nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Beépülők"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Biztonsági mentéseim"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Készítse elő a G-kódot az exportálás előtt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG kép"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG kép"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG kép"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP kép"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF kép"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Hiba történt a biztonsági másolat visszaállításakor."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Biztonsági mentések"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Hiba történt a biztonsági mentés feltöltése közben."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "A biztonsági mentés feltöltése ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "A biztonsági mentés feltöltése befejeződött."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Bitonsági mentések kezelése"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "A firmware egy szoftver, ami közvetlenül a nyomtatón fut. Ez vezérli a léptető motorokat, szabályozza a hőmérsékleteket, és az egész nyomtató működését."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "A firmware a nyomtató része, így a használatba vételkor már a gépen található.Azonban készülnek belőle újabb verziók, amik esetleges hibákat szüntetnek meg, illetve egyéb új funkciókat biztosíthatnak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automatikus firmware frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Egyedi firmware feltöltése"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "A firmware feltöltés nem lehetséges, mert nincs a nyomtatóval kapcsolat."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "A firmware feltöltés nem lehetséges, mert ugyan a nyomtató kapcsolódik, de az nem támogatja a firmware frissítést."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Egyedi firmware kiválasztása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "A firmware frissítése."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Firmware frissítés kész."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "A firmware frissítés meghiúsult ismeretlen hiba miatt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "A firmware frissítés meghiúsult kommunikációs hiba miatt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "A firmware frissítés meghiúsult input/output hiba miatt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "A firmware frissítés meghiúsult, mert nem található a firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Kép konvertálás..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Magasság (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Az alap magassága a tárgyasztaltól mm -ben."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Alap (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A szélesség mm -ben a tárgyasztalon."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Szélesség (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A mélység mm-ben a tárgyasztalon"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Mélység (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "A sötétebb a magasabb"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "A világosabb a magasabb"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Áruház"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A kép simításának mértéke."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Simítás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Nyomtató"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Fűvóka beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Fúvóka méret"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Nyomtatószál átmérő"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Fúvóka X eltolás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Fúvóka Y eltolás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Következő"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Hűtőventilátorok száma"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extruder G-kód kezdés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extruder G-kód zárás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Nyomtató beállítás"
+msgid "The following packages will be added:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szélesség)"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Mélység)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Eltávolítás jóváhagyása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Magasság)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Tárgyasztal alakja"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Alapanyagok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origó középen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profilok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Fűtött asztal"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Jóváhagy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Fűtött nyomtatási tér"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-kód illesztés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Nyomtatófej beállítások"
+msgid "Community Contributions"
+msgstr "Közösségi hozzájárulások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+msgid "Community Plugins"
+msgstr "Közösségi bővítmények"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
 msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+msgid "Generic Materials"
+msgstr "Általános anyagok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Version"
+msgstr "Verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Last updated"
+msgstr "Utosó frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Szán magasság"
+msgid "Brand"
+msgstr "Márka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Extruderek száma"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-kód kezdés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-kód zárás"
+msgid "Downloads"
+msgstr "Letöltések"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
 msgstr ""
-"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
-"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
-"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
-"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Nézd meg az online felhasználói kézikönyvet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Háló típus"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normál mód"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Támaszként nyomtassa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
+msgid "No plugin has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Beállítások kiválasztása"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "A modellek egyéni beállításainak kiválasztása"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Szűrés..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mindent mutat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Utó művelet beépülő"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Utó művelet szkript"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Adjon hozzá egy szkriptet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
-msgctxt "@label"
-msgid "Settings"
-msgstr "Beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Szín séma"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Alapanyag szín"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Vonal típus"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Réteg vastagság"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Kompatibilis mód"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Átmozgás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Segítők"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Héj"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Kitöltés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Csak a felső rétegek megjelenítése"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mutasson 5 felső réteget részletesen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Felső / Alsó"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Belső fal"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
-msgctxt "@label"
-msgid "min"
-msgstr "min"
+msgid "Website"
+msgstr "Weboldal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "max"
-msgstr "max"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "További információ a névtelen adatgyűjtésről"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
+msgid "Email"
+msgstr "Email"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nem szeretnék részt venni az adatgyűjtésben"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Anonim adatok küldésének engedélyezése"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Bejelentkezés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Vissza"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Csomagok beolvasása..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
 msgid "Compatibility"
 msgstr "Kompatibilitás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
 msgctxt "@label:table_header"
 msgid "Machine"
 msgstr "Gép"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
 msgctxt "@label:table_header"
 msgid "Build Plate"
 msgstr "Tárgyasztal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
 msgctxt "@label:table_header"
 msgid "Support"
 msgstr "Támasz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
 msgctxt "@label:table_header"
 msgid "Quality"
 msgstr "Minőség"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
 msgid "Technical Data Sheet"
 msgstr "Technikai adatlap"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
 msgctxt "@action:label"
 msgid "Safety Data Sheet"
 msgstr "Biztonsági adatlap"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
 msgctxt "@action:label"
 msgid "Printing Guidelines"
 msgstr "Nyomtatási útmutató"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
 msgctxt "@action:label"
 msgid "Website"
 msgstr "Weboldal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Kiegészítők"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Alapanyagok"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
 msgid "Installed"
 msgstr "Telepítve"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Bejelentkezés</a> szükséges a telepítéshez vagy frissítéshez"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Anyagtekercsek vásárlása</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "Telepítés után újraindul"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "Frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "Frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "Frissítve"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Bejelentkezés</a> szükséges a frissítéshez"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Leminősítés"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Eltávolítás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Telepítve"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Bejelentkezés</a> szükséges a telepítéshez vagy frissítéshez"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Anyagtekercsek vásárlása</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
 msgid "Premium"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
 msgctxt "@label"
 msgid "Search materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
 msgid "You will need to restart Cura before changes in packages have effect."
 msgstr "A csomagok változásainak érvénybe lépése előtt újra kell indítania a Cura-t."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Kiegészítők"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Alapanyagok"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Telepítve"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Telepítés után újraindul"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Bejelentkezés</a> szükséges a frissítéshez"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Leminősítés"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Eltávolítás"
+msgid "Back"
+msgstr "Vissza"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
 msgctxt "@action:button"
 msgid "Install"
 msgstr "Telepítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Háló típus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+msgctxt "@label"
+msgid "Normal model"
+msgstr "Normál mód"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Következő"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+msgctxt "@label"
+msgid "Print as support"
+msgstr "Támaszként nyomtassa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
-msgid "The following packages will be added:"
+msgid "Modify settings for overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgid "Don't support overlaps"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Eltávolítás jóváhagyása"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Alapanyagok"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Beállítások kiválasztása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profilok"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "A modellek egyéni beállításainak kiválasztása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Jóváhagy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Szűrés..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mindent mutat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
-msgstr "Weboldal"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Utó művelet beépülő"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
+msgid "Post Processing Scripts"
+msgstr "Utó művelet szkript"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
-msgstr "Verzió"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Adjon hozzá egy szkriptet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Utosó frissítés"
+msgid "Settings"
+msgstr "Beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Márka"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "Letöltések"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Közösségi hozzájárulások"
+msgid "Queued"
+msgstr "Nyomtatási Sor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Közösségi bővítmények"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Kezelés a böngészőben"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Általános anyagok"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot."
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "Nyomtatások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Teljes nyomtatási idő"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Várakozom"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "Konfiguráció változások"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "Felülírás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
+msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Csomagok beolvasása..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Áruház"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Tálca szintezés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Tálca szintezés indítása"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
+msgstr "Üveg"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mozgás a következő pozícióba"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "Alumínium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
+msgid "Unavailable printer"
+msgstr "Elérhetetlen nyomtató"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
+msgid "First available"
+msgstr "Az első elérhető"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Csatlakozás hálózati nyomtatóhoz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Válaszd ki a nyomtatódat az alábbi listából:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Szerkeszt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Eltávolít"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Frissít"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Ha a nyomtatód nincs a listában, olvasd el a <a href='%1'>hálózati nyomtatás hibaelhárítási útmutatót</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Típus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Frimware verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Cím"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "A címen található nyomtató még nem válaszolt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Csatlakozás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Hibás IP cím"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Kérlek adj meg egy érvényes IP címet."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Nyomtató cím"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Írd be a nyomtató hálózati IP címét."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Konfiguráció változások"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Felülírás"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
-msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Nyomtatás hálózaton"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Üveg"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Nyomtatás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alumínium"
+msgid "Printer selection"
+msgstr "Nyomtató kiválasztás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Lépj a tetjére"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Törlés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Folytat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Várakozás..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Folytatás..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Várakozás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Megszakítás..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Megszakít"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Tedd a nyomtatási sor elejére"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Biztos, hogy törölni szeretnéd %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Nyomtatási feladat törlés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Biztosan meg akarod szakítani %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Nyomtatás megszakítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Megszakítva"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Befejezve"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Előkészítés..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Megszakítás..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Várakozás..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Várakozás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Folytatás..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Beavatkozás szükséges"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Befejezve %1 a %2 -ből"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Nyomtató kezelés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Betöltés..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Elérhetetlen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Elérhetetlen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Készenlét"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Felirat nélküli"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Névtelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "A konfiguráció változtatásokat igényel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Részletek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Elérhetetlen nyomtató"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Az első elérhető"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Megszakítva"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Tálca szintezés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Befejezve"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Előkészítés..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Megszakítás..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Tálca szintezés indítása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Várakozás..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mozgás a következő pozícióba"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Várakozás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Projekt megnyitása"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Folytatás..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Beavatkozás szükséges"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Befejezve %1 a %2 -ből"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Összegzés - Cura Project"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Nyomtató beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Típus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Nyomtató csoport"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profil beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Név"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nincs a profilban"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 felülírás"
+msgstr[1] "%1 felülírás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Származék"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 felülírás"
+msgstr[1] "%1, %2 felülírás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Alapanyag beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Beállítások láthatósága"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mód"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Látható beállítások:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 %2 -ből"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Megnyitás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
+"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
+"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
+"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Nézd meg az online felhasználói kézikönyvet"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "További információ a névtelen adatgyűjtésről"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nem szeretnék részt venni az adatgyűjtésben"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Anonim adatok küldésének engedélyezése"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Nyomtatási Sor"
+msgid "Color scheme"
+msgstr "Szín séma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Kezelés a böngészőben"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Alapanyag szín"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Vonal típus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
+msgid "Compatibility Mode"
+msgstr "Kompatibilis mód"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Nyomtatások"
+msgid "Travels"
+msgstr "Átmozgás"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Teljes nyomtatási idő"
+msgid "Helpers"
+msgstr "Segítők"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Várakozom"
+msgid "Shell"
+msgstr "Héj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Nyomtatás hálózaton"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Kitöltés"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Nyomtatás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Nyomtató kiválasztás"
+msgid "Only Show Top Layers"
+msgstr "Csak a felső rétegek megjelenítése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mutasson 5 felső réteget részletesen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr ""
+msgid "Top / Bottom"
+msgstr "Felső / Alsó"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Belső fal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Fiók létrehozása"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr ""
+msgid "max"
+msgstr "max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Fűvóka beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr ""
+msgid "Nozzle size"
+msgstr "Fúvóka méret"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
+msgid "mm"
+msgstr "mm"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Nyomtatószál átmérő"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Fúvóka X eltolás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Fúvóka Y eltolás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Hűtőventilátorok száma"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extruder G-kód kezdés"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extruder G-kód zárás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Nyomtató"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Nyomtató beállítás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+msgctxt "@label"
+msgid "X (Width)"
+msgstr "X (Szélesség)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
+msgstr "Y (Mélység)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Magasság)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+msgctxt "@label"
+msgid "Build plate shape"
+msgstr "Tárgyasztal alakja"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origó középen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Fűtött asztal"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Fűtött nyomtatási tér"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-kód illesztés"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Nyomtatófej beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Szán magasság"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Extruderek száma"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-kód kezdés"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-kód zárás"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Kép konvertálás..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Magasság (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Az alap magassága a tárgyasztaltól mm -ben."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Alap (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "A szélesség mm -ben a tárgyasztalon."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Szélesség (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "A mélység mm-ben a tárgyasztalon"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Mélység (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "A sötétebb a magasabb"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "A világosabb a magasabb"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nincs időbecslés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A kép simításának mértéke."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nincs költségbecslés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Simítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Biztonsági mentéseim"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Preview"
-msgstr "Előnézet"
+msgid "Want more?"
+msgstr "Többet szeretnél?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Időbecslés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "Biztonsági mentés most"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Anyag becslés"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatikus biztonsági mentés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura verzió"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Szeletelés..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Gépek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nem szeletelhető"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Alapanyagok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
-msgstr "Feldolgozás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profilok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Beépülők"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Slice"
-msgstr "Szeletelés"
+msgid "Restore"
+msgstr "Visszaállítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Szeletelés indítása"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Biztonsági mentés törlés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Elvet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mutassa az online hibaelhárítási útmutatót"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Helyreállítás biztonsági mentésből"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Teljes képernyőre váltás"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Kilépés a teljes képernyőn"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Visszavon"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Alapanyag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Újra"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Kedvencek"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generikus"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fájl"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "Kilép"
+msgid "Export Selection..."
+msgstr "Kiválasztás exportálása..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D nézet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Legutóbbi fájlok"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Konfiguráció kiválasztása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurációk"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurációk"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Egyéni"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Nyomtató"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Bekapcsolt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Alapanyag"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Piactér"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Nézet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Előlnézet"
+msgid "&Camera position"
+msgstr "&Kamera helyzet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Felülnézet"
+msgid "Camera view"
+msgstr "Kamera nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Bal oldalnézet"
+msgid "Perspective"
+msgstr "Perspektívikus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Jobb oldalnézet"
+msgid "Orthographic"
+msgstr "Merőleges"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura beállítása..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Tárgyasztal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Nyomtató hozzáadása..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Hálózati nyomtatók"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Nyomtatók kezelése..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Helyi nyomtatók"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Anyagok kezelése..."
+msgid "Visible Settings"
+msgstr "Láthatósági beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Jelenlegi változtatások eldobása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Beállítások láthatóságának kezelése..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profilok kezelése..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Nyomtató"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Online &Dokumentumok megjelenítése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Alapanyag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Hibajelentés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Beállítva aktív extruderként"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Újdonságok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder engedélyezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Rólunk..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder letiltása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Kiválasztott modell törlése"
-msgstr[1] "Kiválasztott modellek törlése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "A kijelölt modellt középre"
-msgstr[1] "A kijelölt modelleket középre"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Kiválasztott modell nyomtatása:"
+msgstr[1] "Kiválasztott modellek nyomtatása:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
-msgstr[0] "A kijelölt modell többszörözése"
-msgstr[1] "A kijelölt modellek többszörözése"
+msgstr[0] "Kiválasztott modell sokszorozása"
+msgstr[1] "Kiválasztott modellek sokszorozása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Modell törlés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Másolatok száma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "&Középső modell a platformon"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Csoportosítás"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Csoport bontása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "A jelenlegi változások elvetése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Modellek keverése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Modell többszörözés..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
+"\n"
+"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Mindent kijelöl"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Be"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Tárgyasztal törlése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Ki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Mindent újratölt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Tapasztalati"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Minden modell elrendezése a tárgyasztalon"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Ajánlott"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Minden modell rendezése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Egyéni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Kijelöltek rendezése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Nyomtatási beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Minden modellpozíció visszaállítása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Minden modelltranszformáció visszaállítása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Fokozatos kitöltés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Fájl(ok) megnyitása..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "Új projekt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profilok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Konfigurációs mappa megjelenítése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Beállítások láthatóságának beállítása..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Támasz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Piactér"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ez a csomag újraindítás után fog települni."
+msgid "Adhesion"
+msgstr "Letapadás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Általános"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Beállítások"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Nyomtatók"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profilok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktív nyomtatás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Feladat név"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Nyomtatási idő"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Becsült hátralévő idő"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Fájl(ok) megnyitása"
+msgid "Discard or Keep changes"
+msgstr "Változtatások megtartása vagy eldobása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Csomag telepítése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Fájl(ok) megnyitása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profil beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Nyomtató hozzáadása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Mindig kérdezz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Újdonságok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Eldobás és ne kérdezze újra"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Megtartás és ne kérdezze újra"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "verzió: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafikai felhasználói interfész"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Alkalmazás keretrendszer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-kód generátor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Folyamatközi kommunikációs könyvtár"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programozási nyelv"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI keretrendszer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI keretrendszer függőségek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ függőségek könyvtár"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Adat csere formátum"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Támogató könyvtár a tudományos számítások számára"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Támogató könyvtár a gyorsabb matematikához"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Támogató könyvtár az STL fájlok kezeléséhez"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Támogató könyvtár a sík objektumok kezeléséhez"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Támogató könyvtár a háromszög hálók kezeléséhez"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Soros kommunikációs könyvtár"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf felderítő könyvtár"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Poligon daraboló könyvtár"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Betűtípus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG ikonok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux kereszt-disztribúciós alkalmazás telepítése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projekt fájl megnyitása"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Emlékezzen a választásra"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Megnyitás projektként"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellek importálása"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Változtatások megtartása vagy eldobása"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profil beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Mindig kérdezz"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Eldobás és ne kérdezze újra"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Megtartás és ne kérdezze újra"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr ""
+msgid "Open file(s)"
+msgstr "Fájl(ok) megnyitása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importáljunk mindent modellekként"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Projekt mentése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & alapanyag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Alapanyag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Ne mutassa újra a projekt összegzését mentés közben"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Mentés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Kiválasztott modell nyomtatása %1"
-msgstr[1] "Kiválasztott modellek nyomtatása %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projekt fájl megnyitása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Emlékezzen a választásra"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Megnyitás projektként"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellek importálása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Névtelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fájl"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Üdvözöljük az Ultimaker Cura-ban"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "S&zerkesztés"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Nézet"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Kezdj hozzá"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Beállítások"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Üres"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "K&iterjesztések"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referenciák"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Segítség"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Géptípusok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Új projekt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Anyagfelhasználás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Szeletek száma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Piactér"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Nyomtatási beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurációk"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Több információ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
+msgid "Add printer by IP address"
+msgstr "Nyomtató hozzáadása IP címmel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Hozzáad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Piactér"
+msgid "Could not connect to device."
+msgstr "Nem sikerült csatlakozni az eszközhöz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
+msgid "The printer at this address has not responded yet."
+msgstr "Az ezen a címen található nyomtató még nem válaszolt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Konfiguráció kiválasztása"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Vissza"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Csatlakozás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurációk"
+msgid "Add a printer"
+msgstr "Nyomtató hozzáadása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Egyéni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Hálózati nyomtató hozzáadása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Nyomtató"
+msgid "Add a non-networked printer"
+msgstr "Helyi nyomtató hozzáadása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Bekapcsolt"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Alapanyag"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
+msgid "Waiting for Cloud response"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Kiválasztott modell nyomtatása:"
-msgstr[1] "Kiválasztott modellek nyomtatása:"
+msgid "No printers found in your account?"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Kiválasztott modell sokszorozása"
-msgstr[1] "Kiválasztott modellek sokszorozása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Másolatok száma"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Kiválasztás exportálása..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Alapanyag"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Kedvencek"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generikus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Felhasználói Szerződés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Hálózati nyomtatók"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Elutasítás és bezárás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Helyi nyomtatók"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Legutóbbi fájlok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "A hálózaton nem található nyomtató."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Nyomtató"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Frissítés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Alapanyag"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Nyomtató hozzáadása IP címmel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Beállítva aktív extruderként"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder engedélyezése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Hibaelhárítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder letiltása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nyomtató név"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Bejelentkezés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Objektum lista"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Láthatósági beállítások"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Mutassa az online hibaelhárítási útmutatót"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr ""
+msgid "Toggle Full Screen"
+msgstr "Teljes képernyőre váltás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Beállítások láthatóságának kezelése..."
+msgid "Exit Full Screen"
+msgstr "Kilépés a teljes képernyőn"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Visszavon"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Újra"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "Kilép"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kamera helyzet"
+msgid "3D View"
+msgstr "3D nézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kamera nézet"
+msgid "Front View"
+msgstr "Előlnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektívikus"
+msgid "Top View"
+msgstr "Felülnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Merőleges"
+msgid "Left Side View"
+msgstr "Bal oldalnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Tárgyasztal"
+msgid "Right Side View"
+msgstr "Jobb oldalnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nincs nyomtatóhoz csatlakoztatva"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura beállítása..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "A nyomtató nem fogadja a parancsokat"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Nyomtató hozzáadása..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Nyomtatók kezelése..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Elveszett a kapcsolat a nyomtatóval"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Anyagok kezelése..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Nyomtatás..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Felfüggsztve"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Előkészítés..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Jelenlegi változtatások eldobása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Távolítsa el a tárgyat"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profilok kezelése..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Online &Dokumentumok megjelenítése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Hibajelentés"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Újdonságok"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Rólunk..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Modell törlés"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "&Középső modell a platformon"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Csoportosítás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Csoport bontása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Modellek keverése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Modell többszörözés..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Mindent kijelöl"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Tárgyasztal törlése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Mindent újratölt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Minden modell elrendezése a tárgyasztalon"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Minden modell rendezése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Kijelöltek rendezése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Minden modellpozíció visszaállítása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Minden modelltranszformáció visszaállítása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Fájl(ok) megnyitása..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "Új projekt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Konfigurációs mappa megjelenítése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Beállítások láthatóságának beállítása..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Piactér"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Számított"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Beállítás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Jelenlegi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Egység"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Információ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Új átmérő megerősítése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Nyomtatás megszakítás"
+msgid "Display Name"
+msgstr "Megjelenítendő név"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Biztosan meg akarod szakítani a nyomtatást?"
+msgid "Material Type"
+msgstr "Alapanyag típus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr ""
+msgid "Color"
+msgstr "Szín"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr ""
+msgid "Properties"
+msgstr "Tulajdonságok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr ""
+msgid "Density"
+msgstr "Sűrűség"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr ""
+msgid "Diameter"
+msgstr "Átmérő"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Nyomtatószál költség"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Objektum lista"
+msgid "Filament weight"
+msgstr "Nyomtatószál súly"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Nyomtatószál hossz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Költség / méter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Alapanyag leválasztása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Leírás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Tapadási információ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivál"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Létrehoz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Másolat"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Import"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Nyomtató"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Eltávolítás megerősítése"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Alapanyag importálás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Sikeres alapanyag import <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Alapanyag export"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Nyomtatók"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Átnevezés"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profilok"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Létrehozás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Másolás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil készítés"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Adjon nevet ehhez a profilhoz."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profil másolása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profil átnevezés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profil importálás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profil exportálás"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Nyomtató: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Általános beállítások"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Láthatóság beállítása"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Mindent ellenőrizni"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Általános"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfész"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Pénznem:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Téma:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "A módosítások érvénybe lépéséhez újra kell indítania az alkalmazást."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatikus újraszeletelés, ha a beállítások megváltoznak."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatikus szeletelés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "A nézetablak viselkedése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Jelölje meg pirossal azokat a területeket, amiket szükséges alátámasztani.Ha ezeket a részeket nem támasztjuk alá, a nyomtatás nem lesz hibátlan."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Túlnyúlás kijelzése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "A kamerát úgy mozgatja, hogy a modell kiválasztásakor, az a nézet középpontjában legyen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Kamera középre, mikor az elem ki van választva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Megfordítsuk-e az alapértelmezett Zoom viselkedését?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Fordítsa meg a kamera zoom irányát."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "A nagyítás az egér mozgatásának irányában mozogjon?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Az egér felé történő nagyítás ortográfiai szempontból nem támogatott."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Nagyítás az egér mozgás irányában"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Az alapsíkon lévő modelleket elmozgassuk úgy, hogy ne keresztezzék egymást?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "A modellek egymástól való távtartásának biztosítása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "A modelleket mozgatni kell lefelé, hogy érintsék a tárgyasztalt?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellek automatikus tárgyasztalra illesztése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Figyelmeztető üzenet megjelenítése g-kód olvasóban."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Figyelmeztető üzenet a g-code olvasóban"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Kényszerítsük a réteget kompatibilitási módba ?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "A rétegnézet kompatibilis módjának kényszerítése (újraindítás szükséges)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Milyen fípusú fényképezőgépet használunk?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspetívikus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Merőleges"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Fájlok megnyitása és mentése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "A modelleket átméretezzük a maximális építési méretre, ha azok túl nagyok?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Nagy modellek átméretezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Egy adott modell rendkívül kicsinek tűnhet, ha mértékegysége például méterben van, nem pedig milliméterben. Ezeket a modelleket átméretezzük?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extrém kicsi modellek átméretezése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Betöltés után a modellek legyenek kiválasztva?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modell kiválasztása betöltés után"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "A nyomtató nevét, mint előtagot, hozzáadjuk a nyomtatási feladat nevéhez?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Gépnév előtagként a feladatnévben"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Mutassuk az összegzést a projekt mentésekor?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Összegzés megjelenítése projekt mentésekor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Mindig kérdezz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Projektként való megnyitás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importálja a modelleket"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Ha módosított egy profilt, és váltott egy másikra, akkor megjelenik egy párbeszédpanel, amelyben megkérdezi, hogy meg kívánja-e tartani a módosításokat, vagy nem. Vagy választhat egy alapértelmezett viselkedést, és soha többé nem jeleníti meg ezt a párbeszédablakot."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profilok"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Alapértelmezett viselkedés a megváltozott beállítási értékeknél, ha másik profilra vált: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Megváltozott beállítások elvetése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Megváltozott beállítások alkalmazása az új profilba"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Magán"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "A Cura-nak ellenőriznie kell-e a frissítéseket a program indításakor?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Keressen frissítéseket az induláskor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Elküldjük a nyomtatott adatokat név nélkül az Ultimaker-nek?Semmilyen személyes infromáció, IP cím vagy azonosító nem kerül elküldésre."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Név nélküli információ küldés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Több információ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivál"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Átnevezés"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Létrehoz"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Másolat"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Import"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Nyomtató"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Eltávolítás megerősítése"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Alapanyag importálás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Nézet típus"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Sikeres alapanyag import <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nincs nyomtatóhoz csatlakoztatva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Alapanyag export"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "A nyomtató nem fogadja a parancsokat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Elveszett a kapcsolat a nyomtatóval"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Információ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Nyomtatás..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Új átmérő megerősítése"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Felfüggsztve"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Előkészítés..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Megjelenítendő név"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Távolítsa el a tárgyat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Alapanyag típus"
+msgid "Abort Print"
+msgstr "Nyomtatás megszakítás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Szín"
+msgid "Are you sure you want to abort the print?"
+msgstr "Biztosan meg akarod szakítani a nyomtatást?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Tulajdonságok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Sűrűség"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Értékek másolása minden extruderre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Átmérő"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Minden változott érték másolása minden extruderre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Nyomtatószál költség"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Beállítás elrejtése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Nyomtatószál súly"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Ne jelenítsd meg ezt a beállítást"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Nyomtatószál hossz"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Beállítás látható marad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Költség / méter"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
+"\n"
+"Kattints, hogy ezek a beállítások láthatók legyenek."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Alapanyag leválasztása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Befolyásolások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Leírás"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Befolyásolja"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Tapadási információ"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Nyomtatási beállítások"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Létrehozás"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Ennek a beállításnak az értéke eltér a profilban megadottól.\n"
+"\n"
+"Kattintson a profil értékének visszaállításához."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Másolás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil készítés"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Adjon nevet ehhez a profilhoz."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profil másolása"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profil átnevezés"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profil importálás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profil exportálás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Nyomtató: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "A jelenlegi változások elvetése"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Általános beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Számított"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Beállítás"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n"
+"\n"
+"Kattintson, hogy visszaállítsuk a kalkulált értéket."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Jelenlegi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Egység"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Láthatóság beállítása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Mindent ellenőrizni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Ennek a fejnek a jelenlegi hőmérséklete."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "A nyomtatófej előmelegítési hőmérséklete."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Elvet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Előfűtés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Az alapanyag színe ennél az extrudernél."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Az alapanyag ebben az extruderben."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "A fúvóka be van építve az extruderbe."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Tárgyasztal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "A fűthető ágy aktuális hőmérséklete."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "A tálca előmelegítési hőmérséklete."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Nyomtató vezérlés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Léptetőgomb pozíció"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Léptetőgomb távolság"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-kód küldés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "A nyomtató nincs csatlakoztatva."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Nyomtató hozzáadása"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Nyomtatók kezelése"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Csatlakoztatott nyomtatók"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Előre beállított nyomtatók"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktív nyomtatás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Feladat név"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Nyomtatási idő"
+msgid "Is printed as support."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Becsült hátralévő idő"
+msgid "Other models overlapping with this model are modified."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+msgid "Infill overlapping with this model is modified."
 msgstr ""
-"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
-"\n"
-"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Egyéni"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Be"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Ki"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Tapasztalati"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Letapadás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
-msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Fokozatos kitöltés"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr "Támasz"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Piactér"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
-"\n"
-"Kattints, hogy ezek a beállítások láthatók legyenek."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "S&zerkesztés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "K&iterjesztések"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Befolyásolások"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referenciák"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Befolyásolja"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Segítség"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Új projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Ennek a beállításnak az értéke eltér a profilban megadottól.\n"
-"\n"
-"Kattintson a profil értékének visszaállításához."
+msgid "This package will be installed after restarting."
+msgstr "Ez a csomag újraindítás után fog települni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n"
-"\n"
-"Kattintson, hogy visszaállítsuk a kalkulált értéket."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Beállítások"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Értékek másolása minden extruderre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Minden változott érték másolása minden extruderre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Beállítás elrejtése"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Ne jelenítsd meg ezt a beállítást"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Beállítás látható marad"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Csomag telepítése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Fájl(ok) megnyitása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Nyomtató hozzáadása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Nézet típus"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Újdonságok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr ""
+msgid "Add printer"
+msgstr "Nyomtató hozzáadása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Befejezés"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nyomtató név"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
+msgid "Manage printers"
+msgstr "Nyomtatók kezelése"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a printer"
-msgstr "Nyomtató hozzáadása"
+msgid "Connected printers"
+msgstr "Csatlakoztatott nyomtatók"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Hálózati nyomtató hozzáadása"
+msgid "Preset printers"
+msgstr "Előre beállított nyomtatók"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Helyi nyomtató hozzáadása"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Kiválasztott modell nyomtatása %1"
+msgstr[1] "Kiválasztott modellek nyomtatása %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "A hálózaton nem található nyomtató."
+msgid "Time estimation"
+msgstr "Időbecslés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Frissítés"
+msgid "Material estimation"
+msgstr "Anyag becslés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
-msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Nyomtató hozzáadása IP címmel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
-msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Hibaelhárítás"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Szeletelés..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Nyomtató hozzáadása IP címmel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nem szeletelhető"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+msgctxt "@button"
+msgid "Processing"
+msgstr "Feldolgozás"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add"
-msgstr "Hozzáad"
+msgid "Slice"
+msgstr "Szeletelés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nem sikerült csatlakozni az eszközhöz."
+msgid "Start the slicing process"
+msgstr "Szeletelés indítása"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Elvet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Az ezen a címen található nyomtató még nem válaszolt."
+msgid "No time estimation available"
+msgstr "Nincs időbecslés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-msgctxt "@button"
-msgid "Back"
-msgstr "Vissza"
+msgid "No cost estimation available"
+msgstr "Nincs költségbecslés"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Connect"
-msgstr "Csatlakozás"
+msgid "Preview"
+msgstr "Előnézet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
-msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Cserélhető meghajtók kimeneti beépülője"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "A 3.5-es verzió frissítése 4.0-ra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
-msgctxt "@button"
-msgid "Skip"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Géptípusok"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Anyagfelhasználás"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Szeletek száma"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Nyomtatási beállítások"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Több információ"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Üres"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Felhasználói Szerződés"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "A 2.2-es verzió frissítése 2.4-ig"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Elutasítás és bezárás"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Üdvözöljük az Ultimaker Cura-ban"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "A 4.2-es verzió frissítése 4.3-ra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
-"Kéjük, kövesd a következő lépéseket\n"
-"az Ultimaker Cura beállításához. Pár pillanat az egész."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Kezdj hozzá"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Újdonságok az Ultimaker Cura-ban"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr ""
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modell-ellenőrző"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "A 3.0-s verzió frissítése 3.1-re"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF olvasó"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "A 4.0-s verzió frissítése 4.1-re"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok írásához."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF író"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "A 2.6-os verzió frissítése 2.7-re"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Támogatást nyújt az AMF fájlok olvasásához."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF Olvasó"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "A 2.5-es verzió frissítése 2.6-ra"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "A 4.1-es verzió frissítése 4.2-re"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine motor"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "A 2.1-es verzió frissítése 2.2-re"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok importálásához."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura profil olvasó"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "A 3.2-es verzió frissítése 3.3-ra"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok exportálásához."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura profil író"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Ellenőrzi a firmware frissítéseket."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Frimrware frissítés ellenőrző"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Gépi funkciókat biztosít a firmware frissítéséhez."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware frissítő"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Olvassa be a g-kódot egy tömörített archívumból."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Tömörített G-kód olvasó"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "A 3.3-as verzió frissítése 3.4-re"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-kódot ír egy tömörített archívumba."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Tömörített G-kód író"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-kód profil olvasó"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "A 3.4-es verzió frissítése 3.5-re"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-kód olvasó"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "A 2.7-es verzió frissítése 3.0-ra"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G-kódot ír fájlba."
+msgid "Provides support for reading AMF files."
+msgstr "Támogatást nyújt az AMF fájlok olvasásához."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-kódot író"
+msgid "AMF Reader"
+msgstr "AMF Olvasó"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Kép olvasó"
+msgid "G-code Profile Reader"
+msgstr "G-kód profil olvasó"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Gépi funkciókat biztosít a firmware frissítéséhez."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Örökölt Cura profil olvasó"
+msgid "Firmware Updater"
+msgstr "Firmware frissítő"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
+msgid "Provides support for reading X3D files."
+msgstr "Támogatást nyújt az X3D fájlok olvasásához."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
+msgid "X3D Reader"
+msgstr "X3D Olvasó"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Monitor nézetet biztosít a Cura -ban."
+msgid "Find, manage and install new Cura packages."
+msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Monitor nézet"
+msgid "Toolbox"
+msgstr "Eszköztár"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5605,375 +5711,357 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Utólagos feldolgozás"
 
-#: PrepareStage/plugin.json
-msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
-
-#: PrepareStage/plugin.json
-msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Előkészítés nézet"
-
-#: PreviewStage/plugin.json
-msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Előnézet biztosítása a Cura -ban."
-
-#: PreviewStage/plugin.json
-msgctxt "name"
-msgid "Preview Stage"
-msgstr "Előnézet"
-
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Cserélhető meghajtók kimeneti beépülője"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine motor"
 
-#: SentryLogger/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
 
-#: SentryLogger/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+msgid "USB printing"
+msgstr "USB nyomtatás"
 
-#: SimulationView/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Szimulációs nézetet biztosít."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok exportálásához."
 
-#: SimulationView/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Szimulációs nézet"
+msgid "Cura Profile Writer"
+msgstr "Cura profil író"
 
-#: SliceInfoPlugin/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
 
-#: SliceInfoPlugin/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Szeletelési infó"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker hálózati kapcsolat"
 
-#: SolidView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Felületi háló nézetet biztosít."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
 
-#: SolidView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Felület nézet"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker gépi funkciók"
 
-#: SupportEraser/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
+msgid "Provides support for reading 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
 
-#: SupportEraser/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Támasz törlő"
+msgid "3MF Reader"
+msgstr "3MF olvasó"
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-kódot ír egy tömörített archívumba."
 
-#: Toolbox/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Eszköztár"
+msgid "Compressed G-code Writer"
+msgstr "Tömörített G-kód író"
 
-#: TrimeshReader/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Támogatást nyújt a modellfájlok olvasásához."
+msgid "Reads g-code from a compressed archive."
+msgstr "Olvassa be a g-kódot egy tömörített archívumból."
 
-#: TrimeshReader/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh olvasó"
+msgid "Compressed G-code Reader"
+msgstr "Tömörített G-kód olvasó"
 
-#: UFPReader/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
 
-#: UFPReader/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP Olvasó"
+msgid "Model Checker"
+msgstr "Modell-ellenőrző"
 
-#: UFPWriter/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
+msgid "Checks for firmware updates."
+msgstr "Ellenőrzi a firmware frissítéseket."
 
-#: UFPWriter/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP Író"
+msgid "Firmware Update Checker"
+msgstr "Frimrware frissítés ellenőrző"
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
+msgid "Allows loading and displaying G-code files."
+msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
 
-#: UltimakerMachineActions/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker gépi funkciók"
+msgid "G-code Reader"
+msgstr "G-kód olvasó"
 
-#: UM3NetworkPrinting/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
 
-#: UM3NetworkPrinting/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker hálózati kapcsolat"
+msgid "Support Eraser"
+msgstr "Támasz törlő"
 
-#: USBPrinting/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
+msgid "Provides support for reading model files."
+msgstr "Támogatást nyújt a modellfájlok olvasásához."
 
-#: USBPrinting/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB nyomtatás"
+msgid "Trimesh Reader"
+msgstr "Trimesh olvasó"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "A 2.1-es verzió frissítése 2.2-re"
+msgid "Sentry Logger"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "A 2.2-es verzió frissítése 2.4-ig"
+msgid "UFP Reader"
+msgstr "UFP Olvasó"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "A 2.5-es verzió frissítése 2.6-ra"
+msgid "Legacy Cura Profile Reader"
+msgstr "Örökölt Cura profil olvasó"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
+msgid "Provides a prepare stage in Cura."
+msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "A 2.6-os verzió frissítése 2.7-re"
+msgid "Prepare Stage"
+msgstr "Előkészítés nézet"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
+msgid "Provides a monitor stage in Cura."
+msgstr "Monitor nézetet biztosít a Cura -ban."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "A 2.7-es verzió frissítése 3.0-ra"
+msgid "Monitor Stage"
+msgstr "Monitor nézet"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
+msgid "Provides the X-Ray view."
+msgstr "Röntgen nézetet biztosít."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "A 3.0-s verzió frissítése 3.1-re"
+msgid "X-Ray View"
+msgstr "Röntgen nézet"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra."
+msgid "Provides support for writing 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok írásához."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "A 3.2-es verzió frissítése 3.3-ra"
+msgid "3MF Writer"
+msgstr "3MF író"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "A 3.3-as verzió frissítése 3.4-re"
+msgid "Slice info"
+msgstr "Szeletelési infó"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti."
+msgid "Provides a preview stage in Cura."
+msgstr "Előnézet biztosítása a Cura -ban."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "A 3.4-es verzió frissítése 3.5-re"
+msgid "Preview Stage"
+msgstr "Előnézet"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
+msgid "Provides the Simulation view."
+msgstr "Szimulációs nézetet biztosít."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "A 3.5-es verzió frissítése 4.0-ra"
+msgid "Simulation View"
+msgstr "Szimulációs nézet"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "A 4.0-s verzió frissítése 4.1-re"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "A 4.1-es verzió frissítése 4.2-re"
+msgid "Material Profiles"
+msgstr "Alapanyag profilok"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra."
+msgid "Provides a normal solid mesh view."
+msgstr "Felületi háló nézetet biztosít."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "A 4.2-es verzió frissítése 4.3-ra"
+msgid "Solid View"
+msgstr "Felület nézet"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr ""
+msgid "Provides support for importing Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok importálásához."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr ""
+msgid "Cura Profile Reader"
+msgstr "Cura profil olvasó"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "UFP Writer"
+msgstr "UFP Író"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
+msgid "Writes g-code to a file."
+msgstr "G-kódot ír fájlba."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
+msgid "G-code Writer"
+msgstr "G-kódot író"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból."
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
+msgid "Image Reader"
+msgstr "Kép olvasó"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
+msgid "Backup and restore your configuration."
+msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Réteg vastagság"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Fiók létrehozása"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Támogatást nyújt az X3D fájlok olvasásához."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Kiválasztott modell törlése"
+#~ msgstr[1] "Kiválasztott modellek törlése"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D Olvasó"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "A kijelölt modellt középre"
+#~ msgstr[1] "A kijelölt modelleket középre"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "A kijelölt modell többszörözése"
+#~ msgstr[1] "A kijelölt modellek többszörözése"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Alapanyag profilok"
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Befejezés"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Röntgen nézetet biztosít."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Kéjük, kövesd a következő lépéseket\n"
+#~ "az Ultimaker Cura beállításához. Pár pillanat az egész."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen nézet"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Újdonságok az Ultimaker Cura-ban"
 
 #~ msgctxt "@info:status"
 #~ msgid "The selected model was too small to load."
diff --git a/resources/i18n/hu_HU/fdmextruder.def.json.po b/resources/i18n/hu_HU/fdmextruder.def.json.po
index 572a2d163d..e83acb2880 100644
--- a/resources/i18n/hu_HU/fdmextruder.def.json.po
+++ b/resources/i18n/hu_HU/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-03-24 09:27+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po
index 7498ce78b9..31eeb253f7 100644
--- a/resources/i18n/hu_HU/fdmprinter.def.json.po
+++ b/resources/i18n/hu_HU/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-03-24 09:43+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Tiltott területek"
@@ -487,8 +507,8 @@ msgstr "Extruder eltolás"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Alkalmazza az extruder eltolását a koordinátarendszerre vonatkoztatva."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "Az első réteg vonalszélességének szorzója. Ennek a növelésével
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Héj"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "A külső fal nyomtatása után, beilleszt egy fej átemelést, a meghatározott távolságra. Ez segít elrejteni a Z varratot."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Felső és külső felületi extruder"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Az az extruder, amelyik a felső réteg külső lezárását végzi.Ez a funkció csak multiextruderes gépen érhető el."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Felső kéreg rétegek"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "A felső felszíni zárórétegek száma. Általában egy felső réteg is elegendő a jó minőségű felső felületek előállításához."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Alsó/felső extruder"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Az az extruder, amit az alsó/felső felületi rétegek nyomtatásához használunk. Ezt csak multi extruder esetén használhatjuk."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Alsó/felső vastagság"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Az alsó/felső rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az alsó/felső rétegek számát."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Felső vastagság"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "A felső rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az felső rétegek számát."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Felső rétegek"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "A felső rétegek száma. A felső vastagság alapján számítva ezt az értéket egész számra kerekíti."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Alsó vastagság"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Az alsó rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az alsó rétegek számát."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Alsó rétegek"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Az alsó rétegek száma. Az alsó vastagság alapján számítva ezt az értéket egész számra kerekíti."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Alsó/felső mintázat"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Az alsó/felső rétegek mintázata."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Vonalas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Körkörös"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Cikcakk"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Alsó kezdő réteg mintázata"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "A legalsóbb, kezdő réteg mintázata."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Vonalas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Körkörös"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Cikcakk"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Alsó/felső poligonok kapcsolása"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Az alsó/felső rétegpályákat kapcsolja össze, ahol egymás mellett futnak.Ha ezt a beállítást engedélyezzük a körkörös mintázatnál, jelentősen csökkenthetjük a fej átemelési időt, mivel a kapcsolódások félúton terténhetnek meg. Ez azonban ronthatja a felső felület minőségét."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Alsó/felső vonal irányok"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Az egész vonal-irányok listája, amelyet akkor kell használni, ha az alsó/felső rétegek a vonalas vagy cikcakk mintákat használják.A lista elemeit egymás után használják a rétegek előrehaladtával, és amikor a lista vége eléri, akkor újra előlről kezdi.A lista elemeit vesszők választják el, és a teljes listát szögletes zárójelben tartalmazza. Az Alapértelmezés egy üres lista, amely azt jelenti, hogy a hagyományos alapértelmezett szögeket (45 és 135 fok) kell használni."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Külső fal eltolás"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Ha engedélyezve van, a z varrás koordinátái az egyes alkatrészek középpontjához viszonyítva vannak. Letiltva a koordináták meghatározzák az abszolút helyzetét a tárgyasztalon."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Felső és külső felületi extruder"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Az az extruder, amelyik a felső réteg külső lezárását végzi.Ez a funkció csak multiextruderes gépen érhető el."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Felső kéreg rétegek"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "A felső felszíni zárórétegek száma. Általában egy felső réteg is elegendő a jó minőségű felső felületek előállításához."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Alsó/felső extruder"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Az az extruder, amit az alsó/felső felületi rétegek nyomtatásához használunk. Ezt csak multi extruder esetén használhatjuk."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Alsó/felső vastagság"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Az alsó/felső rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az alsó/felső rétegek számát."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Felső vastagság"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "A felső rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az felső rétegek számát."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Felső rétegek"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "A felső rétegek száma. A felső vastagság alapján számítva ezt az értéket egész számra kerekíti."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Alsó vastagság"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Az alsó rétegek vastagsága a nyomtatáskor. Ez az érték osztva a rétegmagassággal adja meg az alsó rétegek számát."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Alsó rétegek"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Az alsó rétegek száma. Az alsó vastagság alapján számítva ezt az értéket egész számra kerekíti."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Alsó/felső mintázat"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Az alsó/felső rétegek mintázata."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Vonalas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Körkörös"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Cikcakk"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Alsó kezdő réteg mintázata"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "A legalsóbb, kezdő réteg mintázata."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Vonalas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Körkörös"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Cikcakk"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Alsó/felső poligonok kapcsolása"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Az alsó/felső rétegpályákat kapcsolja össze, ahol egymás mellett futnak.Ha ezt a beállítást engedélyezzük a körkörös mintázatnál, jelentősen csökkenthetjük a fej átemelési időt, mivel a kapcsolódások félúton terténhetnek meg. Ez azonban ronthatja a felső felület minőségét."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Alsó/felső vonal irányok"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Az egész vonal-irányok listája, amelyet akkor kell használni, ha az alsó/felső rétegek a vonalas vagy cikcakk mintákat használják.A lista elemeit egymás után használják a rétegek előrehaladtával, és amikor a lista vége eléri, akkor újra előlről kezdi.A lista elemeit vesszők választják el, és a teljes listát szögletes zárójelben tartalmazza. Az Alapértelmezés egy üres lista, amely azt jelenti, hogy a hagyományos alapértelmezett szögeket (45 és 135 fok) kell használni."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Felület nélküli Z hézag"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Az átfedés mértékét állítja be a falak és a felszíni vonalak középpontjainak végpontjai között. Az enyhe átfedés lehetővé teszi a falak szoros kapcsolódását  a felszínhez. Vegye figyelembe, hogy ha a kéreg és a fal vonalszélessége egyenlő, akkor a fal szélességének felét meghaladó érték bármilyen felszín esetén  áthaladhat a falon, mert ezen a ponton a kéreg-extruder fúvóka pozíciója már elérheti a fal közepén."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Kéreg eltávolítás szélessége"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Az eltávolítandó kéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek alsó és felső részének nyomtatásához felhasznált időt és anyagot."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Felső kéreg eltávolítási szélesség"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Az eltávolítandó felső kéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek felső részének nyomtatásához felhasznált időt és anyagot."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Alsó kéreg eltávolítási szélesség"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Az eltávolítandó alsókéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek alsó részének nyomtatásához felhasznált időt és anyagot."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Kéreg bővítési távolság"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "A kéreg felületek a kitöltésig jönnek létre. Ha bővítjük a kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Felső kéreg bővítési távolság"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "A felső kéreg felületek a kitöltésig jönnek létre. Ha bővítjük a felső kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Alsó kéreg bővítési távolság"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Az alsó kéreg felületek a kitöltésig jönnek létre. Ha bővítjük az alsó kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "A kéreg bővítés maximális szöge"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "A minimális kéregszélesség kibővítéshez"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Az ennél keskenyebb kéregfelületek nem bővülnek ki. Ezzel elkerülhető, hogy keskeny kéregfelületek kibővüljenek, amik akkor jönnek létre, mikor a modell külső felületének lejtése közel van a függőlegeshez."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Kitöltés"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Az a belső túlnyúlási szög, amihez szükséges kitöltést hozzáadni. Ha ez 0°, a test teljes mértékben kitöltésre kerül. Ha az érték 90°, akkor nem lesz semmiféle kitöltés."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Kéreg eltávolítás szélessége"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Az eltávolítandó kéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek alsó és felső részének nyomtatásához felhasznált időt és anyagot."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Felső kéreg eltávolítási szélesség"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Az eltávolítandó felső kéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek felső részének nyomtatásához felhasznált időt és anyagot."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Alsó kéreg eltávolítási szélesség"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Az eltávolítandó alsókéreg felület legnagyobb szélessége. Az ettől kissebb felületek el fognak tűnni. Ez segíthet korlátozni a modell ferde felületeinek alsó részének nyomtatásához felhasznált időt és anyagot."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Kéreg bővítési távolság"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "A kéreg felületek a kitöltésig jönnek létre. Ha bővítjük a kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Felső kéreg bővítési távolság"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "A felső kéreg felületek a kitöltésig jönnek létre. Ha bővítjük a felső kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Alsó kéreg bővítési távolság"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Az alsó kéreg felületek a kitöltésig jönnek létre. Ha bővítjük az alsó kérget, és növeljük ezt az értéket, akkor jobb tapadást érhetünk el a kitöltéssel kapcsolatban, illetve a szomszédos falak jobban tudnak tapadni a kéreghez. Az alacsonyabb érték anyagmegtakarítást eredményez."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "A kéreg bővítés maximális szöge"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "A tárgy alsó/felső felületén, az itt megadott szögnél nagyobb szög esetén a kéreg nem lesz kibővítve. Így elkerülhető, hogy a keskeny kéregrészek ne legyenek kibővítve, amik akkor jönnek létre, mikor a modell felülete közel függőleges szögben áll. A 0° szög a vízszintes, míg a 90° szög a függőlegest jelenti."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "A minimális kéregszélesség kibővítéshez"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Az ennél keskenyebb kéregfelületek nem bővülnek ki. Ezzel elkerülhető, hogy keskeny kéregfelületek kibővüljenek, amik akkor jönnek létre, mikor a modell külső felületének lejtése közel van a függőlegeshez."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr ""
@@ -2561,8 +2591,8 @@ msgstr "Kezdő réteg sebessége"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "A kezdő réteg sebessége. Az alacsonyabb érték segít növelni a tapadást a tárgyasztalhoz."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,7 +5105,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "A túlnyúlások maximális szöge a nyomtathatóvá tétel után. 0 ° értéknél az összes túlnyúlást egy, az építőlemezhez kapcsolt modelldarab váltja fel, a 90 ° -ot a modell semmilyen módon nem változtatja meg."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Kifutás engedélyezés"
@@ -6360,6 +6400,22 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "A modellre alkalmazandó átalakítási mátrix, amikor azt fájlból tölti be."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Alkalmazza az extruder eltolását a koordinátarendszerre vonatkoztatva."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Héj"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "A tárgy alsó/felső felületén, az itt megadott szögnél nagyobb szög esetén a kéreg nem lesz kibővítve. Így elkerülhető, hogy a keskeny kéregrészek ne legyenek kibővítve, amik akkor jönnek létre, mikor a modell felülete közel függőleges szögben áll. A 0° szög a vízszintes, míg a 90° szög a függőlegest jelenti."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "A kezdő réteg sebessége. Az alacsonyabb érték segít növelni a tapadást a tárgyasztalhoz."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "A tárgyasztal hőmérséklete. Ha ez az érték 0, akkor  tárgyasztal hőmérséklete nem lesz beállítva, azaz nem fogja fűteni a gép."
diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po
index eb02d844d2..eb5862662d 100644
--- a/resources/i18n/it_IT/cura.po
+++ b/resources/i18n/it_IT/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Italian <info@lionbridge.com>, Italian <info@bothof.nl>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.1.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Sconosciuto"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Caricamento macchine in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Le stampanti riportate di seguito non possono essere collegate perché fanno parte di un gruppo"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Impostazione delle preferenze..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Stampanti disponibili in rete"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inizializzazione Active Machine in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Non sottoposto a override"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inizializzazione gestore macchina in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Rimuovere {0}? Questa operazione non può essere annullata!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inizializzazione volume di stampa in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Impostazione scena in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visivo"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Caricamento interfaccia in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Il profilo visivo è destinato alla stampa di prototipi e modelli visivi, con l'intento di ottenere una qualità visiva e della superficie elevata."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inizializzazione motore in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Il profilo di progettazione è destinato alla stampa di prototipi funzionali e di componenti d'uso finale, allo scopo di ottenere maggiore precisione e tolleranze strette."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "È possibile caricare un solo file codice G per volta. Importazione saltata {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Bozza"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Avvertenza"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Il profilo bozza è destinato alla stampa dei prototipi iniziali e alla convalida dei concept, con l'intento di ridurre in modo significativo il tempo di stampa."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Impossibile aprire altri file durante il caricamento del codice G. Importazione saltata {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Errore"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Rimuovere {0}? Questa operazione non può essere annullata!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Materiale personalizzato"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personalizzata"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Sconosciuto"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Profili personalizzati"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Tutti i tipi supportati ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tutti i file (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login non riuscito"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Ricerca nuova posizione per gli oggetti"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Ricerca posizione"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visivo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Impossibile individuare una posizione nel volume di stampa per tutti gli oggetti"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Il profilo visivo è destinato alla stampa di prototipi e modelli visivi, con l'intento di ottenere una qualità visiva e della superficie elevata."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Impossibile individuare posizione"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Impossibile creare un archivio dalla directory dei dati utente: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Il profilo di progettazione è destinato alla stampa di prototipi funzionali e di componenti d'uso finale, allo scopo di ottenere maggiore precisione e tolleranze strette."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Bozza"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentativo di ripristinare un backup di Cura senza dati o metadati appropriati."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Il profilo bozza è destinato alla stampa dei prototipi iniziali e alla convalida dei concept, con l'intento di ridurre in modo significativo il tempo di stampa."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativo di ripristinare un backup di Cura di versione superiore rispetto a quella corrente."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Le stampanti riportate di seguito non possono essere collegate perché fanno parte di un gruppo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "L’altezza del volume di stampa è stata ridotta a causa del valore dell’impostazione \"Sequenza di stampa” per impedire la collisione del gantry con i modelli stampati."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Stampanti disponibili in rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Non sottoposto a override"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Impossibile avviare Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>Si prega di inviare questo Rapporto su crash per correggere il problema.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Inviare il rapporto su crash a Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Mostra il rapporto su crash dettagliato"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Mostra cartella di configurazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Backup e reset configurazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Rapporto su crash"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1125 +249,780 @@ msgstr ""
 "            <p>Usare il pulsante “Invia report\" per inviare automaticamente una segnalazione errore ai nostri server</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informazioni di sistema"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Sconosciuto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Versione Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Lingua Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Lingua sistema operativo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Piattaforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Versione Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Versione PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Non ancora inizializzato<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Versione OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Fornitore OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Renderer OpenGL: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Analisi errori"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Registri"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Invia report"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Caricamento macchine in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Impostazione delle preferenze..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inizializzazione Active Machine in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inizializzazione gestore macchina in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inizializzazione volume di stampa in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Impostazione scena in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Caricamento interfaccia in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inizializzazione motore in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "È possibile caricare un solo file codice G per volta. Importazione saltata {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Avvertenza"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Impossibile aprire altri file durante il caricamento del codice G. Importazione saltata {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Errore"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Moltiplicazione e collocazione degli oggetti"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Sistemazione oggetti"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Sistemazione oggetto"
+msgid "Login failed"
+msgstr "Login non riuscito"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Impossibile leggere la risposta."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Impossibile avviare un nuovo processo di accesso. Verificare se è ancora attivo un altro tentativo di accesso."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Impossibile raggiungere il server account Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "Lo stato fornito non è corretto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Fornire i permessi necessari al momento dell'autorizzazione di questa applicazione."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Si è verificato qualcosa di inatteso durante il tentativo di accesso, riprovare."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Impossibile avviare un nuovo processo di accesso. Verificare se è ancora attivo un altro tentativo di accesso."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Impossibile raggiungere il server account Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Il file esiste già"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Il file <filename>{0}</filename> esiste già. Sei sicuro di volerlo sovrascrivere?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "File URL non valido:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Ugello"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Le impostazioni sono state modificate in base all’attuale disponibilità di estrusori:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Impostazioni aggiornate"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Estrusore disabilitato"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Impossibile esportare il profilo su <filename>{0}</filename>: Rilevata anomalia durante scrittura plugin."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profilo esportato su <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Esportazione riuscita"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Impossibile importare il profilo da <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Impossibile importare il profilo da <filename>{0}</filename> prima di aggiungere una stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Nessun profilo personalizzato da importare nel file <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Questo profilo <filename>{0}</filename> contiene dati errati, impossibile importarlo."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Impossibile importare il profilo da <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Profilo {0} importato correttamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Il file {0} non contiene nessun profilo valido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Il profilo {0} ha un tipo di file sconosciuto o corrotto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Profilo personalizzato"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Il profilo è privo del tipo di qualità."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Pila globale mancante."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Impossibile aggiungere il profilo."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Il tipo di qualità '{0}' non è compatibile con la definizione di macchina attiva corrente '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Avvertenza: il profilo non è visibile in quanto il tipo di qualità '{0}' non è disponibile per la configurazione corrente. Passare alla combinazione materiale/ugello"
-" che consente di utilizzare questo tipo di qualità."
+msgstr "Avvertenza: il profilo non è visibile in quanto il tipo di qualità '{0}' non è disponibile per la configurazione corrente. Passare alla combinazione materiale/ugello che consente di utilizzare questo tipo di qualità."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Non supportato"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Ugello"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Le impostazioni sono state modificate in base all’attuale disponibilità di estrusori:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Ricerca nuova posizione per gli oggetti"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Impostazioni aggiornate"
+msgid "Finding Location"
+msgstr "Ricerca posizione"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Impossibile individuare una posizione nel volume di stampa per tutti gli oggetti"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Estrusore disabilitato"
+msgid "Can't Find Location"
+msgstr "Impossibile individuare posizione"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Gruppo #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Aggiungi"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Fine"
+msgid "Close"
+msgstr "Chiudi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annulla"
+msgid "Next"
+msgstr "Avanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Gruppo #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Fine"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Parete esterna"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Pareti interne"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Rivestimento esterno"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Riempimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Riempimento del supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interfaccia supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Torre di innesco"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Spostamenti"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retrazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Altro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Avanti"
+msgid "Add"
+msgstr "Aggiungi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Chiudi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente modello 3D"
+msgid "Cancel"
+msgstr "Annulla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>La stampa di uno o più modelli 3D può non avvenire in modo ottimale a causa della dimensioni modello e della configurazione materiale:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Scopri come garantire la migliore qualità ed affidabilità di stampa.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Visualizza la guida alla qualità di stampa</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Il file di progetto <filename>{0}</filename> contiene un tipo di macchina sconosciuto <message>{1}</message>. Impossibile importare la macchina. Verranno invece importati i modelli."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Apri file progetto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Il file di progetto <filename>{0}</filename> è diventato improvvisamente inaccessibile: <message>{1}</message>."
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "L’altezza del volume di stampa è stata ridotta a causa del valore dell’impostazione \"Sequenza di stampa” per impedire la collisione del gantry con i modelli stampati."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Impossibile aprire il file di progetto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Il file di progetto <filename>{0}</filename> è realizzato con profili sconosciuti a questa versione di Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Consigliata"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizzata"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "File 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Plug-in Writer 3MF danneggiato."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Nessuna autorizzazione di scrittura dell'area di lavoro qui."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Il sistema operativo non consente di salvare un file di progetto in questa posizione o con questo nome file."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Errore scrittura file 3MF."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "File 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "File 3MF Progetto Cura"
+msgid "Build Volume"
+msgstr "Volume di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "File AMF"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Impossibile creare un archivio dalla directory dei dati utente: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Backups"
+msgid "Backup"
 msgstr "Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Si è verificato un errore durante il caricamento del backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Creazione del backup in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Si è verificato un errore durante la creazione del backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Caricamento backup in corso..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Caricamento backup completato."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Il backup supera la dimensione file massima."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Si è verificato un errore cercando di ripristinare il backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gestione backup"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Impossibile eseguire il sezionamento con il materiale corrente in quanto incompatibile con la macchina o la configurazione selezionata."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Sezionamento impossibile"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Impossibile eseguire il sezionamento con le impostazioni attuali. Le seguenti impostazioni presentano errori: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Impossibile eseguire il sezionamento a causa di alcune impostazioni per modello. Le seguenti impostazioni presentano errori su uno o più modelli: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Impossibile eseguire il sezionamento perché la torre di innesco o la posizione di innesco non sono valide."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Impossibile effettuare il sezionamento in quanto vi sono oggetti associati a Extruder %s disabilitato."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentativo di ripristinare un backup di Cura senza dati o metadati appropriati."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Verificare le impostazioni e controllare se i modelli:\n"
-"- Rientrano nel volume di stampa\n"
-"- Sono assegnati a un estrusore abilitato\n"
-"- Non sono tutti impostati come maglie modificatore"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativo di ripristinare un backup di Cura di versione superiore rispetto a quella corrente."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Elaborazione dei livelli"
+msgid "Multiplying and placing objects"
+msgstr "Moltiplicazione e collocazione degli oggetti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informazioni"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profilo Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Non è possibile accedere alle informazioni di aggiornamento."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "È possibile che per {machine_name} siano disponibili nuove funzionalità o bug fix. Se non si dispone della versione più recente, è consigliabile aggiornare il firmware della stampante alla versione {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nuovo firmware %s disponibile"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Modalità di aggiornamento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aggiornamento firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "File G-Code compresso"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter non supporta la modalità di testo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "File G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Parsing codice G"
+msgid "Placing Objects"
+msgstr "Sistemazione oggetti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Dettagli codice G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Verifica che il codice G sia idoneo alla tua stampante e alla sua configurazione prima di trasmettere il file. La rappresentazione del codice G potrebbe non essere accurata."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "File G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter non supporta la modalità non di testo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Preparare il codice G prima dell’esportazione."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Immagine JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Immagine JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Immagine PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Immagine BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Immagine GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profili Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Impostazioni macchina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Controlla"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Impostazioni per modello"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configura impostazioni per modello"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Post-elaborazione"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modifica codice G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Prepara"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Anteprima"
+msgid "Placing Object"
+msgstr "Sistemazione oggetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Salva su unità rimovibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Salva su unità rimovibile {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Non ci sono formati di file disponibili per la scrittura!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Salvataggio su unità rimovibile <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Salvataggio in corso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Impossibile salvare <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Impossibile trovare un nome file durante il tentativo di scrittura su {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Impossibile salvare su unità rimovibile {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Salvato su unità rimovibile {0} come {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "File salvato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Rimuovi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Rimuovi il dispositivo rimovibile {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Espulso {0}. È ora possibile rimuovere in modo sicuro l'unità."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Rimozione sicura dell'hardware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Espulsione non riuscita {0}. È possibile che un altro programma stia utilizzando l’unità."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Unità rimovibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Cura non visualizza in modo accurato i layer se la funzione Wire Printing è abilitata."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Vista simulazione"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Non viene visualizzato nulla poiché è necessario prima effetuare lo slicing."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Nessun layer da visualizzare"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Non mostrare nuovamente questo messaggio"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Visualizzazione strato"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Il modello in uso non è multiforme. Le aree evidenziate indicano superfici mancanti o estranee."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Errori modello"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Visualizzazione compatta"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blocco supporto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Crea un volume in cui i supporti non vengono stampati."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Desiderate sincronizzare pacchetti materiale e software con il vostro account?"
+msgid "AMF File"
+msgstr "File AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Modifiche rilevate dal tuo account Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "File G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizza"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Aggiornamento firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizzazione in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "File X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Non accetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Accetta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Accordo di licenza plugin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Rifiuta e rimuovi dall'account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Impossibile scaricare i plugin {}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Sincronizzazione in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Modifiche rilevate dal tuo account Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Affinché le modifiche diventino effettive, è necessario chiudere e riavviare {}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Impossibile scaricare i plugin {}"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Desiderate sincronizzare pacchetti materiale e software con il vostro account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Sincronizza"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Impostazioni per modello"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configura impostazioni per modello"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Post-elaborazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modifica codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Impossibile eseguire il sezionamento con il materiale corrente in quanto incompatibile con la macchina o la configurazione selezionata."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pacchetto formato Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Sezionamento impossibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Impossibile scrivere nel file UFP:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Impossibile eseguire il sezionamento con le impostazioni attuali. Le seguenti impostazioni presentano errori: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Livella piano di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Impossibile eseguire il sezionamento a causa di alcune impostazioni per modello. Le seguenti impostazioni presentano errori su uno o più modelli: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Seleziona aggiornamenti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Impossibile eseguire il sezionamento perché la torre di innesco o la posizione di innesco non sono valide."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Stampa tramite cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Impossibile effettuare il sezionamento in quanto vi sono oggetti associati a Extruder %s disabilitato."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Stampa tramite cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Verificare le impostazioni e controllare se i modelli:\n"
+"- Rientrano nel volume di stampa\n"
+"- Sono assegnati a un estrusore abilitato\n"
+"- Non sono tutti impostati come maglie modificatore"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Collegato tramite cloud"
+msgid "Processing Layers"
+msgstr "Elaborazione dei livelli"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Codice di errore sconosciuto durante il caricamento del processo di stampa: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informazioni"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Stampa USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Stampa tramite USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Stampa tramite USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Connesso tramite USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Stampa tramite USB in corso, la chiusura di Cura interrompe la stampa. Confermare?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Stampa ancora in corso. Cura non può avviare un'altra stampa tramite USB finché la precedente non è stata completata."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Stampa in corso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profilo Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Collega tramite rete"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nuova stampante rilevata dall'account Ultimaker"
 msgstr[1] "Nuove stampanti rilevate dall'account Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Aggiunta della stampante {name} ({model}) dall'account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1362,71 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} altra"
 msgstr[1] "... e altre {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Stampanti aggiunte da Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Non è disponibile una connessione cloud per una stampante"
 msgstr[1] "Non è disponibile una connessione cloud per alcune stampanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Questa stampante non è collegata a Digital Factory:"
 msgstr[1] "Queste stampanti non sono collegate a Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Per stabilire una connessione, visitare {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Mantenere le configurazioni delle stampanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Rimuovere le stampanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} sarà rimossa fino alla prossima sincronizzazione account."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Per rimuovere definitivamente {printer_name}, visitare {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Rimuovere temporaneamente {printer_name}?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Rimuovere le stampanti?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1435,2164 +1103,2503 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "Si sta per rimuovere {0} stampante da Cura. Questa azione non può essere annullata.\nContinuare?"
-msgstr[1] "Si stanno per rimuovere {0} stampanti da Cura. Questa azione non può essere annullata.\nContinuare?"
+msgstr[0] ""
+"Si sta per rimuovere {0} stampante da Cura. Questa azione non può essere annullata.\n"
+"Continuare?"
+msgstr[1] ""
+"Si stanno per rimuovere {0} stampanti da Cura. Questa azione non può essere annullata.\n"
+"Continuare?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "Si stanno per rimuovere tutte le stampanti da Cura. Questa azione non può essere annullata. \nContinuare?"
+msgstr ""
+"Si stanno per rimuovere tutte le stampanti da Cura. Questa azione non può essere annullata. \n"
+"Continuare?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Invia e controlla i processi di stampa ovunque con l’account Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Stampa tramite cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Effettuare la connessione a Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Stampa tramite cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Per iniziare"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Collegato tramite cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Codice di errore sconosciuto durante il caricamento del processo di stampa: {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Si sta tentando di connettersi a una stampante che non esegue Ultimaker Connect. Aggiornare la stampante con il firmware più recente."
+msgid "tomorrow"
+msgstr "domani"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Aggiornare la stampante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "oggi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura ha rilevato dei profili di materiale non ancora installati sulla stampante host del gruppo {0}."
+msgid "Sending Print Job"
+msgstr "Invio di un processo di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Invio dei materiali alla stampante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Caricamento del processo di stampa sulla stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Tentativo di connessione a {0} in corso, che non è l'host di un gruppo. È possibile visitare la pagina web per configurarla come host del gruppo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Non host del gruppo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurare il gruppo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Invia e controlla i processi di stampa ovunque con l’account Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Effettuare la connessione a Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Per iniziare"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Attendere che sia stato inviato il processo corrente."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Errore di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Impossibile caricare i dati sulla stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Errore di rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Invio di un processo di stampa"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura ha rilevato dei profili di materiale non ancora installati sulla stampante host del gruppo {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Caricamento del processo di stampa sulla stampante."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Invio dei materiali alla stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "La coda dei processi di stampa è piena. La stampante non può accettare un nuovo processo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Coda piena"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Processo di stampa inviato con successo alla stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dati inviati"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Si sta tentando di connettersi a una stampante che non esegue Ultimaker Connect. Aggiornare la stampante con il firmware più recente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Aggiornare la stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Stampa sulla rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Stampa sulla rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Collegato alla rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Collega tramite rete"
+msgid "Select upgrades"
+msgstr "Seleziona aggiornamenti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "domani"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Livella piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "oggi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Consigliata"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Stampa USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizzata"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Stampa tramite USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Il file di progetto <filename>{0}</filename> contiene un tipo di macchina sconosciuto <message>{1}</message>. Impossibile importare la macchina. Verranno invece importati i modelli."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Stampa tramite USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Apri file progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Connesso tramite USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Il file di progetto <filename>{0}</filename> è diventato improvvisamente inaccessibile: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Stampa tramite USB in corso, la chiusura di Cura interrompe la stampa. Confermare?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Impossibile aprire il file di progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Stampa ancora in corso. Cura non può avviare un'altra stampa tramite USB finché la precedente non è stata completata."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Stampa in corso"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Il file di progetto <filename>{0}</filename> è realizzato con profili sconosciuti a questa versione di Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "File X3D"
+msgid "3MF File"
+msgstr "File 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista ai raggi X"
+msgid "Compressed G-code File"
+msgstr "File G-Code compresso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Alcune parti potrebbero risultare problematiche in questa stampa. Fare click per visualizzare i suggerimenti per la regolazione."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter non supporta la modalità di testo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Apri progetto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente modello 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Aggiorna esistente"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>La stampa di uno o più modelli 3D può non avvenire in modo ottimale a causa della dimensioni modello e della configurazione materiale:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Scopri come garantire la migliore qualità ed affidabilità di stampa.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Visualizza la guida alla qualità di stampa</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Crea nuovo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Non è possibile accedere alle informazioni di aggiornamento."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Riepilogo - Progetto Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "È possibile che per {machine_name} siano disponibili nuove funzionalità o bug fix. Se non si dispone della versione più recente, è consigliabile aggiornare il firmware della stampante alla versione {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Impostazioni della stampante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nuovo firmware %s disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Come può essere risolto il conflitto nella macchina?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Modalità di aggiornamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "File G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Gruppo stampanti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Parsing codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Impostazioni profilo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Dettagli codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Verifica che il codice G sia idoneo alla tua stampante e alla sua configurazione prima di trasmettere il file. La rappresentazione del codice G potrebbe non essere accurata."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blocco supporto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Come può essere risolto il conflitto nel profilo?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Crea un volume in cui i supporti non vengono stampati."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Non nel profilo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 override"
-msgstr[1] "%1 override"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivato da"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 override"
-msgstr[1] "%1, %2 override"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Impostazioni materiale"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Pacchetto formato Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Come può essere risolto il conflitto nel materiale?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profili Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Impostazione visibilità"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Prepara"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modalità"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Controlla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Impostazioni visibili:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista ai raggi X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 su %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Errore scrittura file 3MF."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Il caricamento di un progetto annulla tutti i modelli sul piano di stampa."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "File 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Apri"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "File 3MF Progetto Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Ulteriori informazioni?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Plug-in Writer 3MF danneggiato."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Esegui backup adesso"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Nessuna autorizzazione di scrittura dell'area di lavoro qui."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Backup automatico"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Il sistema operativo non consente di salvare un file di progetto in questa posizione o con questo nome file."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Crea automaticamente un backup ogni giorno in cui viene avviata Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Anteprima"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Ripristina"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Visualizzazione strato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Cancella backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Cura non visualizza in modo accurato i layer se la funzione Wire Printing è abilitata."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Sei sicuro di voler cancellare questo backup? Questa operazione non può essere annullata."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Vista simulazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Ripristina backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Non viene visualizzato nulla poiché è necessario prima effetuare lo slicing."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Riavviare Cura prima di ripristinare il backup. Chiudere Cura adesso?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Nessun layer da visualizzare"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versione Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Non mostrare nuovamente questo messaggio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Macchine"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Impostazioni macchina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiali"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Visualizzazione compatta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profili"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plugin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Backup Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "I miei backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Impossibile scrivere nel file UFP:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nessun backup. Usare il pulsante ‘Esegui backup adesso’ per crearne uno."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter non supporta la modalità non di testo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante la fase di anteprima, saranno visibili solo 5 backup. Rimuovi un backup per vedere quelli precedenti."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Preparare il codice G prima dell’esportazione."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Backup e sincronizzazione delle impostazioni Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Immagine JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Accedi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Immagine JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Immagine PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Immagine BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Immagine GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Si è verificato un errore cercando di ripristinare il backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backup"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Si è verificato un errore durante il caricamento del backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Creazione del backup in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Si è verificato un errore durante la creazione del backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Caricamento backup in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Caricamento backup completato."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Il backup supera la dimensione file massima."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gestione backup"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Aggiornamento firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Il firmware è la parte di software eseguita direttamente sulla stampante 3D. Questo firmware controlla i motori passo-passo, regola la temperatura e, in ultima analisi, consente il funzionamento della stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Il firmware inviato a corredo delle nuove stampanti funziona, tuttavia le nuove versioni tendono ad avere più funzioni ed ottimizzazioni."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Aggiorna automaticamente il firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Carica il firmware personalizzato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Impossibile aggiornare il firmware: nessun collegamento con la stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Impossibile aggiornare il firmware: il collegamento con la stampante non supporta l’aggiornamento del firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Seleziona il firmware personalizzato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Aggiornamento del firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Aggiornamento firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Aggiornamento del firmware completato."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Aggiornamento firmware non riuscito a causa di un errore sconosciuto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Aggiornamento firmware non riuscito a causa di un errore di comunicazione."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Aggiornamento firmware non riuscito a causa di un errore di input/output."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Aggiornamento firmware non riuscito per firmware mancante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converti immagine..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Mercato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "La distanza massima di ciascun pixel da \"Base.\""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "È necessario accettare la licenza per installare il pacchetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altezza (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Modifiche dall'account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "L'altezza della base dal piano di stampa in millimetri."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Rimuovi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Avanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "La larghezza in millimetri sul piano di stampa."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Verranno aggiunti i seguenti pacchetti:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Larghezza (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Impossibile installare i seguenti pacchetti a causa di una versione di Cura non compatibile:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "La profondità in millimetri sul piano di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Conferma disinstalla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profondità (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Si stanno installando materiali e/o profili ancora in uso. La conferma ripristina i seguenti materiali/profili ai valori predefiniti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Per le litofanie, i pixel scuri devono corrispondere alle posizioni più spesse per bloccare maggiormente il passaggio della luce. Per le mappe con altezze superiori, i pixel più chiari indicano un terreno più elevato, quindi nel modello 3D generato i pixel più chiari devono corrispondere alle posizioni più spesse."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiali"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Più scuro è più alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profili"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Più chiaro è più alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Conferma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Per le litofanie, è disponibile un semplice modello logaritmico per la traslucenza. Per le mappe delle altezze, i valori in pixel corrispondono alle altezze in modo lineare."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Impossibile connettersi al database pacchetto Cura. Verificare la connessione."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineare"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contributi della comunità"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Traslucenza"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Plugin della comunità"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Percentuale di luce che penetra una stampa dello spessore di 1 millimetro. Se questo valore si riduce, il contrasto nelle aree scure dell'immagine aumenta, mentre il contrasto nelle aree chiare dell'immagine diminuisce."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Materiali generici"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Trasmittanza di 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "La quantità di smoothing (levigatura) da applicare all'immagine."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Ultimo aggiornamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Smoothing"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marchio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Download"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Stampante"
+msgid "Installed plugins"
+msgstr "Plugin installati"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Impostazioni ugello"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Non è stato installato alcun plugin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Dimensione ugello"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Materiali installati"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Non è stato installato alcun materiale."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diametro del materiale compatibile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Plugin inseriti nel bundle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Scostamento X ugello"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Materiali inseriti nel bundle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Scostamento Y ugello"
+msgid "Website"
+msgstr "Sito web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numero ventola di raffreddamento"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Codice G avvio estrusore"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Accedere per ottenere i plugin e i materiali verificati per Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Codice G fine estrusore"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Accedi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Impostazioni della stampante"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Recupero dei pacchetti..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Larghezza)"
+msgid "Compatibility"
+msgstr "Compatibilità"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profondità)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Macchina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altezza)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma del piano di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origine al centro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualità"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Piano riscaldato"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Scheda dati tecnici"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume di stampa riscaldato"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Scheda dati di sicurezza"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Versione codice G"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Linee guida di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Impostazioni della testina di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Sito web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Plugin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiali"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Installa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Vai al Marketplace web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altezza gantry"
+msgid "Will install upon restarting"
+msgstr "L'installazione sarà eseguita al riavvio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Numero di estrusori"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Aggiorna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Codice G avvio"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Aggiornamento in corso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Codice G fine"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Aggiornamento eseguito"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Accertarsi che la stampante sia collegata:\n"
-"- Controllare se la stampante è accesa.\n"
-"- Controllare se la stampante è collegata alla rete.\n"
-"- Controllare se è stato effettuato l'accesso per rilevare le stampanti collegate al cloud."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Log in</a> deve essere aggiornato"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Disinstalla"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Installa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Log in</a> deve essere installato o aggiornato"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Acquista bobine di materiale</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Cerca materiali"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Collegare la stampante alla rete."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Riavviare Cura per rendere effettive le modifiche apportate ai pacchetti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Visualizza i manuali utente online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Chiudere %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Indietro"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installazione"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Tipo di maglia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modello normale"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Stampa come supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modificare le impostazioni per le sovrapposizioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Non supportano le sovrapposizioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Solo maglia di riempimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Ritaglio mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Seleziona impostazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Seleziona impostazioni di personalizzazione per questo modello"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtro..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Mostra tutto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Plug-in di post-elaborazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Script di post-elaborazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Aggiungi uno script"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Impostazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Modificare gli script di post-elaborazione attivi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "È attivo il seguente script:"
 msgstr[1] "Sono attivi i seguenti script:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Schema colori"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Colore materiale"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo di linea"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocità"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Spessore strato"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modalità di compatibilità"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Spostamenti"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Helper"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Shell"
-msgstr "Guscio"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Riempimento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Mostra solo strati superiori"
+msgid "Queued"
+msgstr "Coda di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mostra 5 strati superiori in dettaglio"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gestisci nel browser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superiore / Inferiore"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Non sono presenti processi di stampa nella coda. Eseguire lo slicing e inviare un processo per aggiungerne uno."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parete interna"
+msgid "Print jobs"
+msgstr "Processi di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Tempo di stampa totale"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "In attesa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Maggiori informazioni sulla raccolta di dati anonimi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente. Di seguito è riportato un esempio dei dati condivisi:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Non desidero inviare dati anonimi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Consenti l'invio di dati anonimi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Indietro"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilità"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Macchina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Piano di stampa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Supporto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualità"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Scheda dati tecnici"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Scheda dati di sicurezza"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Linee guida di stampa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sito web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Installa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Log in</a> deve essere installato o aggiornato"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Acquista bobine di materiale</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Aggiorna"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Aggiornamento in corso"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Aggiornamento eseguito"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Vai al Marketplace web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Cerca materiali"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Riavviare Cura per rendere effettive le modifiche apportate ai pacchetti."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Chiudere %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plugin"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiali"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Installa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "L'installazione sarà eseguita al riavvio"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Log in</a> deve essere aggiornato"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Disinstalla"
+msgid "Configuration Changes"
+msgstr "Modifiche configurazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installazione"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Modifiche dall'account"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Rimuovi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Avanti"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Verranno aggiunti i seguenti pacchetti:"
+msgid "Override"
+msgstr "Override"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Impossibile installare i seguenti pacchetti a causa di una versione di Cura non compatibile:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Conferma disinstalla"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Si stanno installando materiali e/o profili ancora in uso. La conferma ripristina i seguenti materiali/profili ai valori predefiniti."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiali"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profili"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Conferma"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "La stampante assegnata, %1, richiede la seguente modifica di configurazione:"
+msgstr[1] "La stampante assegnata, %1, richiede le seguenti modifiche di configurazione:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "È necessario accettare la licenza per installare il pacchetto"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "La stampante %1 è assegnata, ma il processo contiene una configurazione materiale sconosciuta."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Sito web"
+msgid "Change material %1 from %2 to %3."
+msgstr "Cambia materiale %1 da %2 a %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Caricare %3 come materiale %1 (Operazione non annullabile)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versione"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Cambia print core %1 da %2 a %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Ultimo aggiornamento"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Cambia piano di stampa a %1 (Operazione non annullabile)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marchio"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "L’override utilizza le impostazioni specificate con la configurazione stampante esistente. Ciò può causare una stampa non riuscita."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Download"
+msgid "Glass"
+msgstr "Vetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contributi della comunità"
+msgid "Aluminum"
+msgstr "Alluminio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plugin della comunità"
+msgid "Unavailable printer"
+msgstr "Stampante non disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiali generici"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Impossibile connettersi al database pacchetto Cura. Verificare la connessione."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plugin installati"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Non è stato installato alcun plugin."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiali installati"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Non è stato installato alcun materiale."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plugin inseriti nel bundle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiali inseriti nel bundle"
+msgid "First available"
+msgstr "Primo disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Recupero dei pacchetti..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Accedere per ottenere i plugin e i materiali verificati per Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercato"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Livellamento del piano di stampa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Per assicurarsi stampe di alta qualità, è ora possibile regolare il piano di stampa. Quando si fa clic su 'Spostamento alla posizione successiva' l'ugello si sposterà in diverse posizioni che è possibile regolare."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Per ciascuna posizione: inserire un pezzo di carta sotto l'ugello e regolare la stampa dell'altezza del piano di stampa. L'altezza del piano di stampa è corretta quando la carta sfiora la punta dell'ugello."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Avvio livellamento del piano di stampa"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Spostamento alla posizione successiva"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Seleziona qualsiasi aggiornamento realizzato per questa Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Piano di stampa riscaldato (kit ufficiale o integrato)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Aggiornare il firmware della stampante per gestire la coda da remoto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Collega alla stampante in rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Per stampare direttamente sulla stampante in rete, verificare che la stampante desiderata sia collegata alla rete mediante un cavo di rete o mediante collegamento alla rete WIFI. Se non si esegue il collegamento di Cura alla stampante, è comunque possibile utilizzare una chiavetta USB per trasferire i file codice G alla stampante."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selezionare la stampante dall’elenco seguente:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Modifica"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Rimuovi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Aggiorna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se la stampante non è nell’elenco, leggere la <a href='%1'>guida alla risoluzione dei problemi per la stampa in rete</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versione firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Indirizzo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Questa stampante non è predisposta per comandare un gruppo di stampanti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Questa stampante comanda un gruppo di %1 stampanti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "La stampante a questo indirizzo non ha ancora risposto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Collega"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Indirizzo IP non valido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Inserire un indirizzo IP valido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Indirizzo stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Inserire l'indirizzo IP della stampante in rete."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Modifiche configurazione"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Override"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "La stampante assegnata, %1, richiede la seguente modifica di configurazione:"
-msgstr[1] "La stampante assegnata, %1, richiede le seguenti modifiche di configurazione:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "La stampante %1 è assegnata, ma il processo contiene una configurazione materiale sconosciuta."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Cambia materiale %1 da %2 a %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Caricare %3 come materiale %1 (Operazione non annullabile)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Cambia print core %1 da %2 a %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Cambia piano di stampa a %1 (Operazione non annullabile)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "L’override utilizza le impostazioni specificate con la configurazione stampante esistente. Ciò può causare una stampa non riuscita."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Stampa sulla rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Vetro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alluminio"
+msgid "Printer selection"
+msgstr "Selezione stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Sposta in alto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Cancella"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Riprendi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Messa in pausa..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Ripresa in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Interr. in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Interrompi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Sei sicuro di voler spostare %1 all’inizio della coda?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Sposta il processo di stampa in alto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Sei sicuro di voler cancellare %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Cancella processo di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Sei sicuro di voler interrompere %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Interrompi la stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Interrotto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Terminato"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparazione in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Interr. in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Messa in pausa..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "In pausa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Ripresa in corso..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Richiede un'azione"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Finisce %1 a %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gestione stampanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Aggiornare il firmware della stampante per gestire la coda da remoto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Caricamento in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Non disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Non raggiungibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Ferma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Stampa in corso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Senza titolo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonimo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Richiede modifiche di configurazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Dettagli"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Stampante non disponibile"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Seleziona qualsiasi aggiornamento realizzato per questa Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Primo disponibile"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Piano di stampa riscaldato (kit ufficiale o integrato)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Interrotto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Livellamento del piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Terminato"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Per assicurarsi stampe di alta qualità, è ora possibile regolare il piano di stampa. Quando si fa clic su 'Spostamento alla posizione successiva' l'ugello si sposterà in diverse posizioni che è possibile regolare."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparazione in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Per ciascuna posizione: inserire un pezzo di carta sotto l'ugello e regolare la stampa dell'altezza del piano di stampa. L'altezza del piano di stampa è corretta quando la carta sfiora la punta dell'ugello."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Interr. in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Avvio livellamento del piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Messa in pausa..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Spostamento alla posizione successiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "In pausa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Apri progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Ripresa in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Aggiorna esistente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Richiede un'azione"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Crea nuovo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Finisce %1 a %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Riepilogo - Progetto Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Impostazioni della stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Come può essere risolto il conflitto nella macchina?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Gruppo stampanti"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Impostazioni profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Come può essere risolto il conflitto nel profilo?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Non nel profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 override"
+msgstr[1] "%1 override"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivato da"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 override"
+msgstr[1] "%1, %2 override"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Impostazioni materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Come può essere risolto il conflitto nel materiale?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Impostazione visibilità"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modalità"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Impostazioni visibili:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 su %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Il caricamento di un progetto annulla tutti i modelli sul piano di stampa."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Apri"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Alcune parti potrebbero risultare problematiche in questa stampa. Fare click per visualizzare i suggerimenti per la regolazione."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Accertarsi che la stampante sia collegata:\n"
+"- Controllare se la stampante è accesa.\n"
+"- Controllare se la stampante è collegata alla rete.\n"
+"- Controllare se è stato effettuato l'accesso per rilevare le stampanti collegate al cloud."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Collegare la stampante alla rete."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Visualizza i manuali utente online"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Maggiori informazioni sulla raccolta di dati anonimi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente. Di seguito è riportato un esempio dei dati condivisi:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Non desidero inviare dati anonimi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Consenti l'invio di dati anonimi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Coda di stampa"
+msgid "Color scheme"
+msgstr "Schema colori"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gestisci nel browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Colore materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo di linea"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocità"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Non sono presenti processi di stampa nella coda. Eseguire lo slicing e inviare un processo per aggiungerne uno."
+msgid "Compatibility Mode"
+msgstr "Modalità di compatibilità"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Processi di stampa"
+msgid "Travels"
+msgstr "Spostamenti"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo di stampa totale"
+msgid "Helpers"
+msgstr "Helper"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "In attesa"
+msgid "Shell"
+msgstr "Guscio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Stampa sulla rete"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Riempimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Stampa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Selezione stampante"
+msgid "Only Show Top Layers"
+msgstr "Mostra solo strati superiori"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Accedi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mostra 5 strati superiori in dettaglio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "La chiave per la stampa 3D connessa"
+msgid "Top / Bottom"
+msgstr "Superiore / Inferiore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personalizza la tua esperienza con più profili di stampa e plugin\n"
-"- Mantieni la flessibilità sincronizzando la configurazione e caricandola ovunque\n"
-"- Aumenta l'efficienza grazie a un flusso di lavoro remoto sulle stampanti Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parete interna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Crea account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Verifica in corso..."
+msgid "max"
+msgstr "max."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Impostazioni ugello"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Account sincronizzato"
+msgid "Nozzle size"
+msgstr "Dimensione ugello"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Si è verificato un errore..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Installare gli aggiornamenti in attesa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diametro del materiale compatibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificare gli aggiornamenti dell'account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Scostamento X ugello"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Ultimo aggiornamento: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Scostamento Y ugello"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Account Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Numero ventola di raffreddamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Esci"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Codice G avvio estrusore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Codice G fine estrusore"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Impostazioni della stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nessuna stima di tempo disponibile"
+msgid "X (Width)"
+msgstr "X (Larghezza)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nessuna stima di costo disponibile"
+msgid "Y (Depth)"
+msgstr "Y (Profondità)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Anteprima"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Altezza)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Stima del tempo"
+msgid "Build plate shape"
+msgstr "Forma del piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Stima del materiale"
+msgid "Origin at center"
+msgstr "Origine al centro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Piano riscaldato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume di stampa riscaldato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Sezionamento in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Versione codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Sezionamento impossibile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Impostazioni della testina di stampa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Altezza gantry"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Numero di estrusori"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Codice G avvio"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Codice G fine"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Converti immagine..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "La distanza massima di ciascun pixel da \"Base.\""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altezza (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "L'altezza della base dal piano di stampa in millimetri."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "La larghezza in millimetri sul piano di stampa."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Larghezza (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "La profondità in millimetri sul piano di stampa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profondità (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Per le litofanie, i pixel scuri devono corrispondere alle posizioni più spesse per bloccare maggiormente il passaggio della luce. Per le mappe con altezze superiori, i pixel più chiari indicano un terreno più elevato, quindi nel modello 3D generato i pixel più chiari devono corrispondere alle posizioni più spesse."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Più scuro è più alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Più chiaro è più alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Per le litofanie, è disponibile un semplice modello logaritmico per la traslucenza. Per le mappe delle altezze, i valori in pixel corrispondono alle altezze in modo lineare."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineare"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Traslucenza"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Percentuale di luce che penetra una stampa dello spessore di 1 millimetro. Se questo valore si riduce, il contrasto nelle aree scure dell'immagine aumenta, mentre il contrasto nelle aree chiare dell'immagine diminuisce."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Trasmittanza di 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "La quantità di smoothing (levigatura) da applicare all'immagine."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Smoothing"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "I miei backup"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nessun backup. Usare il pulsante ‘Esegui backup adesso’ per crearne uno."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante la fase di anteprima, saranno visibili solo 5 backup. Rimuovi un backup per vedere quelli precedenti."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Backup e sincronizzazione delle impostazioni Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Elaborazione in corso"
+msgid "Want more?"
+msgstr "Ulteriori informazioni?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Sezionamento"
+msgid "Backup Now"
+msgstr "Esegui backup adesso"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Avvia il processo di sezionamento"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Backup automatico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Crea automaticamente un backup ogni giorno in cui viene avviata Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versione Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Macchine"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiali"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profili"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plugin"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Annulla"
+msgid "Restore"
+msgstr "Ripristina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostra la Guida ricerca e riparazione dei guasti online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Cancella backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Attiva/disattiva schermo intero"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Sei sicuro di voler cancellare questo backup? Questa operazione non può essere annullata."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Esci da schermo intero"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Ripristina backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Annulla"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Riavviare Cura prima di ripristinare il backup. Chiudere Cura adesso?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "Ri&peti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Backup Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Preferiti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&File"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Salva progetto..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Esporta..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Esci"
+msgid "Export Selection..."
+msgstr "Esporta selezione..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Visualizzazione 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Ap&ri recenti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Seleziona configurazione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurazioni"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizzata"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Abilitato"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilizzare la colla per una migliore adesione con questa combinazione di materiali."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Questa configurazione non è disponibile perché %1 non viene riconosciuto. Visitare %2 per scaricare il profilo materiale corretto."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Mercato"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Caricamento in corso configurazioni disponibili dalla stampante..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Le configurazioni non sono disponibili perché la stampante è scollegata."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualizza"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Visualizzazione frontale"
+msgid "&Camera position"
+msgstr "&Posizione fotocamera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Visualizzazione superiore"
+msgid "Camera view"
+msgstr "Visualizzazione fotocamera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Visualizzazione lato sinistro"
+msgid "Perspective"
+msgstr "Prospettiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Visualizzazione lato destro"
+msgid "Orthographic"
+msgstr "Ortogonale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configura Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "P&iano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Aggiungi stampante..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Stampanti abilitate per la rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Gestione stampanti..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Stampanti locali"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Gestione materiali..."
+msgid "Visible Settings"
+msgstr "Impostazioni visibili"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Aggiungere altri materiali da Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Aggiorna il profilo con le impostazioni/esclusioni correnti"
+msgid "Collapse All Categories"
+msgstr "Comprimi tutte le categorie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Elimina le modifiche correnti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gestisci Impostazione visibilità..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Crea profilo dalle impostazioni/esclusioni correnti..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Impostazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Gestione profili..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "S&tampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Mostra documentazione &online"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "Ma&teriale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Se&gnala un errore"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Imposta come estrusore attivo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Scopri le novità"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Abilita estrusore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Informazioni..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Disabilita estrusore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Cancella modello selezionato"
-msgstr[1] "Cancella modelli selezionati"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centra modello selezionato"
-msgstr[1] "Centra modelli selezionati"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Stampa modello selezionato con:"
+msgstr[1] "Stampa modelli selezionati con:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Moltiplica modello selezionato"
 msgstr[1] "Moltiplica modelli selezionati"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Elimina modello"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Numero di copie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "C&entra modello su piattaforma"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Raggruppa modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Profili personalizzati"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Separa modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Elimina le modifiche correnti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Unisci modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profilo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "Mo&ltiplica modello..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n"
+"\n"
+"Fare clic per aprire la gestione profili."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Seleziona tutti i modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Inserita"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Cancellare piano di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Disinserita"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Ricarica tutti i modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Sperimentale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Sistema tutti i modelli su tutti i piani di stampa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Consigliata"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Sistema tutti i modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizzata"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Sistema selezione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Impostazioni di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Reimposta tutte le posizioni dei modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Impostazione di stampa disabilitata. Il file G-code non può essere modificato."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Reimposta tutte le trasformazioni dei modelli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Riempimento graduale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Apri file..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Un riempimento graduale aumenterà gradualmente la quantità di riempimento verso l'alto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nuovo Progetto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profili"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Mostra cartella di configurazione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Sono state modificate alcune impostazioni del profilo. Per modificarle, andare alla modalità personalizzata."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configura visibilità delle impostazioni..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Supporto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercato"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Genera strutture per supportare le parti del modello a sbalzo. Senza queste strutture, queste parti collasserebbero durante la stampa."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Questo pacchetto sarà installato dopo il riavvio."
+msgid "Adhesion"
+msgstr "Adesione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Generale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Abilita stampa di brim o raft. Questa funzione aggiunge un’area piana attorno o sotto l’oggetto, facile da tagliare successivamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Impostazioni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Non esiste alcun profilo %1 per la configurazione nelle estrusore %2. In alternativa verrà utilizzato lo scopo predefinito"
+msgstr[1] "Non esiste alcun profilo %1 per le configurazioni negli estrusori %2. In alternativa verrà utilizzato lo scopo predefinito"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Stampanti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profili"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Stampa attiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Chiusura di %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nome del processo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Chiudere %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo di stampa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Tempo residuo stimato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Apri file"
+msgid "Discard or Keep changes"
+msgstr "Elimina o mantieni modifiche"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Installa il pacchetto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Alcune impostazioni di profilo sono state personalizzate.\n"
+"Mantenere queste impostazioni modificate dopo il cambio dei profili?\n"
+"In alternativa, è possibile eliminare le modifiche per caricare i valori predefiniti da '%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Apri file"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Impostazioni profilo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Rilevata la presenza di uno o più file codice G tra i file selezionati. È possibile aprire solo un file codice G alla volta. Se desideri aprire un file codice G, selezionane uno solo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Modifiche correnti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Aggiungi stampante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Chiedi sempre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Scopri le novità"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Elimina e non chiedere nuovamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Mantieni e non chiedere nuovamente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Elimina modifiche"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Mantieni modifiche"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Informazioni su %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versione: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Soluzione end-to-end per la stampa 3D con filamento fuso."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3601,2000 +3608,2103 @@ msgstr ""
 "Cura è stato sviluppato da Ultimaker B.V. in cooperazione con la comunità.\n"
 "Cura è orgogliosa di utilizzare i seguenti progetti open source:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interfaccia grafica utente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Struttura applicazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generatore codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Libreria di comunicazione intra-processo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Lingua di programmazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Struttura GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Vincoli struttura GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Libreria vincoli C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato scambio dati"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Libreria di supporto per calcolo scientifico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Libreria di supporto per calcolo rapido"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Libreria di supporto per gestione file STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Libreria di supporto per gestione oggetti planari"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Libreria di supporto per gestione maglie triangolari"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Libreria di supporto per gestione file 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Libreria di supporto per metadati file e streaming"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Libreria di comunicazione seriale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Libreria scoperta ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Libreria ritaglio poligono"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Controllo di tipo statico per Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificati di origine per la convalida dell'affidabilità SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Libreria per la traccia degli errori Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Libreria di impacchettamento dei poligoni sviluppata da Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Vincoli Python per libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Font"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Icone SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Apertura applicazione distribuzione incrociata Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Apri file progetto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Questo è un file progetto Cura. Vuoi aprirlo come progetto o importarne i modelli?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Ricorda la scelta"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Apri come progetto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importa i modelli"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Elimina o mantieni modifiche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "Alcune impostazioni di profilo sono state personalizzate.\nMantenere queste impostazioni modificate dopo il cambio dei profili?\nIn alternativa, è possibile"
-" eliminare le modifiche per caricare i valori predefiniti da '%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Impostazioni profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Modifiche correnti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Chiedi sempre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Elimina e non chiedere nuovamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Mantieni e non chiedere nuovamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Elimina modifiche"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Mantieni modifiche"
+msgid "Open file(s)"
+msgstr "Apri file"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Rilevata la presenza di uno o più file progetto tra i file selezionati. È possibile aprire solo un file progetto alla volta. Si suggerisce di importare i modelli solo da tali file. Vuoi procedere?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importa tutto come modelli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Salva progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Estrusore %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & materiale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Non mostrare il riepilogo di progetto alla ripetizione di salva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Salva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Stampa modello selezionato con %1"
-msgstr[1] "Stampa modelli selezionati con %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Apri file progetto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Questo è un file progetto Cura. Vuoi aprirlo come progetto o importarne i modelli?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Ricorda la scelta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Apri come progetto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importa i modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Senza titolo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&File"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Benvenuto in Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Modifica"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualizza"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Per iniziare"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Impostazioni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vuoto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Es&tensioni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Aiutaci a migliorare Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referenze"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente, tra cui:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Help"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipi di macchine"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nuovo progetto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilizzo dei materiali"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Sei sicuro di voler aprire un nuovo progetto? Questo cancellerà il piano di stampa e tutte le impostazioni non salvate."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Numero di sezionamenti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercato"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Impostazioni di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurazioni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "I dati acquisiti da Ultimaker Cura non conterranno alcuna informazione personale."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Ulteriori informazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Questa configurazione non è disponibile perché %1 non viene riconosciuto. Visitare %2 per scaricare il profilo materiale corretto."
+msgid "Add printer by IP address"
+msgstr "Aggiungi stampante per indirizzo IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Inserire l'indirizzo IP della stampante."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Aggiungi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercato"
+msgid "Could not connect to device."
+msgstr "Impossibile connettersi al dispositivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Caricamento in corso configurazioni disponibili dalla stampante..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Non è possibile effettuare la connessione alla stampante Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Le configurazioni non sono disponibili perché la stampante è scollegata."
+msgid "The printer at this address has not responded yet."
+msgstr "La stampante a questo indirizzo non ha ancora risposto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Seleziona configurazione"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Questa stampante non può essere aggiunta perché è una stampante sconosciuta o non è l'host di un gruppo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Indietro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Collega"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurazioni"
+msgid "Add a printer"
+msgstr "Aggiungi una stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizzata"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Aggiungi una stampante in rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Stampante"
+msgid "Add a non-networked printer"
+msgstr "Aggiungi una stampante non in rete"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Abilitato"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiale"
+msgid "Add a Cloud printer"
+msgstr "Aggiungere una stampante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilizzare la colla per una migliore adesione con questa combinazione di materiali."
+msgid "Waiting for Cloud response"
+msgstr "In attesa della risposta del cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Stampa modello selezionato con:"
-msgstr[1] "Stampa modelli selezionati con:"
+msgid "No printers found in your account?"
+msgstr "Non sono presenti stampanti nel cloud?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Moltiplica modello selezionato"
-msgstr[1] "Moltiplica modelli selezionati"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Le seguenti stampanti del tuo account sono state aggiunte in Cura:"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Aggiungere la stampante manualmente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Numero di copie"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Salva progetto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Esporta..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Esporta selezione..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Preferiti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Salta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Contratto di licenza"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Stampanti abilitate per la rete"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rifiuta e chiudi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Stampanti locali"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Ap&ri recenti"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Non è stata trovata alcuna stampante sulla rete."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "S&tampante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Aggiorna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "Ma&teriale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Aggiungi stampante per IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Imposta come estrusore attivo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Aggiungere una stampante cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Abilita estrusore"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Ricerca e riparazione dei guasti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Disabilita estrusore"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Produttore"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autore profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Dare un nome alla stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Ultimo aggiornamento: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Account Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Esci"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Accedi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Verifica in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Account sincronizzato"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Si è verificato un errore..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Installare gli aggiornamenti in attesa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificare gli aggiornamenti dell'account"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Elenco oggetti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Impostazioni visibili"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Mostra la Guida ricerca e riparazione dei guasti online"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Comprimi tutte le categorie"
+msgid "Toggle Full Screen"
+msgstr "Attiva/disattiva schermo intero"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gestisci Impostazione visibilità..."
+msgid "Exit Full Screen"
+msgstr "Esci da schermo intero"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Annulla"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "Ri&peti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Esci"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posizione fotocamera"
+msgid "3D View"
+msgstr "Visualizzazione 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Visualizzazione fotocamera"
+msgid "Front View"
+msgstr "Visualizzazione frontale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Prospettiva"
+msgid "Top View"
+msgstr "Visualizzazione superiore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortogonale"
+msgid "Left Side View"
+msgstr "Visualizzazione lato sinistro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&iano di stampa"
+msgid "Right Side View"
+msgstr "Visualizzazione lato destro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Non collegato ad una stampante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configura Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "La stampante non accetta comandi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Aggiungi stampante..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "In manutenzione. Controllare la stampante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Gestione stampanti..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Persa connessione con la stampante"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Gestione materiali..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Stampa in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Aggiungere altri materiali da Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "In pausa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Aggiorna il profilo con le impostazioni/esclusioni correnti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Preparazione in corso..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Elimina le modifiche correnti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Rimuovere la stampa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Crea profilo dalle impostazioni/esclusioni correnti..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Gestione profili..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Mostra documentazione &online"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Se&gnala un errore"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Scopri le novità"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Informazioni..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Elimina modello"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "C&entra modello su piattaforma"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Raggruppa modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Separa modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Unisci modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "Mo&ltiplica modello..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Seleziona tutti i modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Cancellare piano di stampa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Ricarica tutti i modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Sistema tutti i modelli su tutti i piani di stampa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Sistema tutti i modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Sistema selezione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Reimposta tutte le posizioni dei modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Reimposta tutte le trasformazioni dei modelli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Apri file..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nuovo Progetto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Mostra cartella di configurazione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configura visibilità delle impostazioni..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Mercato"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calcolato"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Impostazione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Corrente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unità"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informazioni"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Conferma modifica diametro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Il nuovo diametro del filamento impostato a %1 mm non è compatibile con l'attuale estrusore. Continuare?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Interrompi la stampa"
+msgid "Display Name"
+msgstr "Visualizza nome"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Sei sicuro di voler interrompere la stampa?"
+msgid "Material Type"
+msgstr "Tipo di materiale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Viene stampato come supporto."
+msgid "Color"
+msgstr "Colore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Gli altri modelli che si sovrappongono a questo modello sono stati modificati."
+msgid "Properties"
+msgstr "Proprietà"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "La sovrapposizione del riempimento con questo modello è stata modificata."
+msgid "Density"
+msgstr "Densità"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Le sovrapposizioni con questo modello non sono supportate."
+msgid "Diameter"
+msgstr "Diametro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Ignora %1 impostazione."
-msgstr[1] "Ignora %1 impostazioni."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Costo del filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Elenco oggetti"
+msgid "Filament weight"
+msgstr "Peso del filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Lunghezza del filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Costo al metro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Questo materiale è collegato a %1 e condivide alcune delle sue proprietà."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Scollega materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrizione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informazioni sull’aderenza"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Attiva"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Crea"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplica"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Esporta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Stampante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Conferma rimozione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Sei sicuro di voler rimuovere %1? Questa operazione non può essere annullata!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importa materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossibile importare materiale <filename>{1}</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiale importato correttamente <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Esporta materiale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Impossibile esportare il materiale su <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiale esportato correttamente su <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Stampanti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Rinomina"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profili"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Crea"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplica"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Crea profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Indica un nome per questo profilo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplica profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Rinomina profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importa profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Esporta profilo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Stampante: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Aggiorna il profilo con le impostazioni/esclusioni correnti"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Questo profilo utilizza le impostazioni predefinite dalla stampante, perciò non ci sono impostazioni/esclusioni nell’elenco riportato di seguito."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Le impostazioni correnti corrispondono al profilo selezionato."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Impostazioni globali"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Impostazione visibilità"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Controlla tutto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Generale"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfaccia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuta:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Tema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Riavviare l'applicazione per rendere effettive le modifiche."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Seziona automaticamente alla modifica delle impostazioni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Seziona automaticamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento del riquadro di visualizzazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Evidenzia in rosso le zone non supportate del modello. In assenza di supporto, queste aree non saranno stampate in modo corretto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Visualizza sbalzo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Evidenziare le superfici mancanti o estranee del modello utilizzando i simboli di avvertenza. I percorsi degli utensili spesso ignoreranno parti della geometria prevista."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Visualizzare gli errori del modello"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Sposta la fotocamera in modo che il modello si trovi al centro della visualizzazione quando è selezionato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centratura fotocamera alla selezione dell'elemento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Il comportamento dello zoom predefinito di Cura dovrebbe essere invertito?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverti la direzione dello zoom della fotocamera."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Lo zoom si muove nella direzione del mouse?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Nella prospettiva ortogonale lo zoom verso la direzione del mouse non è supportato."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoom verso la direzione del mouse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "I modelli sull’area di stampa devono essere spostati per evitare intersezioni?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Assicurarsi che i modelli siano mantenuti separati"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "I modelli sull’area di stampa devono essere portati a contatto del piano di stampa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Rilascia automaticamente i modelli sul piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Visualizza il messaggio di avvertimento sul lettore codice G."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Messaggio di avvertimento sul lettore codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Lo strato deve essere forzato in modalità di compatibilità?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forzare la modalità di compatibilità visualizzazione strato (riavvio necessario)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Aprire Cura nel punto in cui è stato chiuso?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Ripristinare la posizione della finestra all'avvio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Quale tipo di rendering della fotocamera è necessario utilizzare?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Rendering fotocamera:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Prospettiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortogonale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Apertura e salvataggio file"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "L'apertura dei file dal desktop o da applicazioni esterne deve essere eseguita nella stessa istanza di Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizzare una singola istanza di Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "I modelli devono essere ridimensionati al volume di stampa, se troppo grandi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Ridimensiona i modelli troppo grandi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Un modello può apparire eccessivamente piccolo se la sua unità di misura è espressa in metri anziché in millimetri. Questi modelli devono essere aumentati?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Ridimensiona i modelli eccessivamente piccoli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "I modelli devono essere selezionati dopo essere stati caricati?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selezionare i modelli dopo il caricamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Al nome del processo di stampa deve essere aggiunto automaticamente un prefisso basato sul nome della stampante?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Aggiungi al nome del processo un prefisso macchina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Quando si salva un file di progetto deve essere visualizzato un riepilogo?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Visualizza una finestra di riepilogo quando si salva un progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento predefinito all'apertura di un file progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento predefinito all'apertura di un file progetto: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Chiedi sempre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Apri sempre come progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importa sempre i modelli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Dopo aver modificato un profilo ed essere passati a un altro, si apre una finestra di dialogo che chiede se mantenere o eliminare le modifiche oppure se scegliere un comportamento predefinito e non visualizzare più tale finestra di dialogo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profili"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento predefinito per i valori di impostazione modificati al passaggio a un profilo diverso: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Elimina sempre le impostazioni modificate"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Trasferisci sempre le impostazioni modificate a un nuovo profilo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura deve verificare la presenza di eventuali aggiornamenti all’avvio del programma?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Controlla aggiornamenti all’avvio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "I dati anonimi sulla stampa devono essere inviati a Ultimaker? Nota, non sono trasmessi o memorizzati modelli, indirizzi IP o altre informazioni personali."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Invia informazioni di stampa (anonime)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Ulteriori informazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Attiva"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Rinomina"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Crea"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplica"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Esporta"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Stampante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Conferma rimozione"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Sei sicuro di voler rimuovere %1? Questa operazione non può essere annullata!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importa materiale"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossibile importare materiale <filename>{1}</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Visualizza tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiale importato correttamente <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Non collegato ad una stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Esporta materiale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "La stampante non accetta comandi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Impossibile esportare il materiale su <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "In manutenzione. Controllare la stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiale esportato correttamente su <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Persa connessione con la stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informazioni"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Stampa in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Conferma modifica diametro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "In pausa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Il nuovo diametro del filamento impostato a %1 mm non è compatibile con l'attuale estrusore. Continuare?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Preparazione in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Visualizza nome"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Rimuovere la stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo di materiale"
+msgid "Abort Print"
+msgstr "Interrompi la stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Colore"
+msgid "Are you sure you want to abort the print?"
+msgstr "Sei sicuro di voler interrompere la stampa?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Proprietà"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Impostazioni ricerca"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densità"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copia valore su tutti gli estrusori"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diametro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copia tutti i valori modificati su tutti gli estrusori"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Costo del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Nascondi questa impostazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Nascondi questa impostazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Lunghezza del filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Mantieni visibile questa impostazione"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Costo al metro"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n"
+"\n"
+"Fare clic per rendere visibili queste impostazioni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Questo materiale è collegato a %1 e condivide alcune delle sue proprietà."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Questa impostazione non è utilizzata perché tutte le impostazioni che influenza sono sottoposte a override."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Scollega materiale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Influisce su"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Descrizione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Influenzato da"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informazioni sull’aderenza"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Questa impostazione è sempre condivisa tra tutti gli estrusori. La sua modifica varierà il valore per tutti gli estrusori."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Impostazioni di stampa"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Questa impostazione viene risolta dai valori in conflitto specifici dell'estrusore:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Crea"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Questa impostazione ha un valore diverso dal profilo.\n"
+"\n"
+"Fare clic per ripristinare il valore del profilo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplica"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Crea profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Indica un nome per questo profilo."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplica profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Rinomina profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importa profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Esporta profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Stampante: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Aggiorna il profilo con le impostazioni/esclusioni correnti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Elimina le modifiche correnti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Questo profilo utilizza le impostazioni predefinite dalla stampante, perciò non ci sono impostazioni/esclusioni nell’elenco riportato di seguito."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Le impostazioni correnti corrispondono al profilo selezionato."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Impostazioni globali"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calcolato"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Impostazione"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n"
+"\n"
+"Fare clic per ripristinare il valore calcolato."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profilo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Visualizzazione 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Corrente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Visualizzazione frontale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unità"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Visualizzazione superiore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Impostazione visibilità"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista sinistra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Controlla tutto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista destra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Estrusore"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Temperatura target dell'estremità riscaldata. L'estremità riscaldata si riscalderà o raffredderà sino a questo valore di temperatura. Se questo è 0, l'estremità riscaldata verrà spenta."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "La temperatura corrente di questa estremità calda."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "La temperatura di preriscaldo dell’estremità calda."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annulla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Pre-riscaldo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Riscalda l’estremità calda prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento dell’estremità calda quando si è pronti per la stampa."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Il colore del materiale di questo estrusore."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Il materiale di questo estrusore."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "L’ugello inserito in questo estrusore."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Piano di stampa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "La temperatura target del piano riscaldato. Il piano verrà riscaldato o raffreddato a questa temperatura. Se è 0, il riscaldamento del piano viene disattivato."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "La temperatura corrente del piano riscaldato."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "La temperatura di preriscaldo del piano."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Riscalda il piano prima della stampa. È possibile continuare a regolare la stampa durante il riscaldamento e non è necessario attendere il riscaldamento del piano quando si è pronti per la stampa."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Comando stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Posizione Jog"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distanza Jog"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Invia codice G"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Invia un comando codice G personalizzato alla stampante connessa. Premere ‘invio’ per inviare il comando."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "La stampante non è collegata."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "La stampante cloud è offline. Verificare se la stampante è accesa e collegata a Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Questa stampante non è collegata al tuo account. Visitare Ultimaker Digital Factory per stabilire una connessione."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "La connessione cloud al momento non è disponibile. Accedere per collegarsi alla stampante cloud."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "La connessione cloud al momento non è disponibile. Verificare la connessione a Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Aggiungi stampante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gestione stampanti"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Stampanti collegate"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Stampanti preimpostate"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Stampa attiva"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome del processo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo di stampa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo residuo stimato"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n"
-"\n"
-"Fare clic per aprire la gestione profili."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Profili personalizzati"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Non esiste alcun profilo %1 per la configurazione nelle estrusore %2. In alternativa verrà utilizzato lo scopo predefinito"
-msgstr[1] "Non esiste alcun profilo %1 per le configurazioni negli estrusori %2. In alternativa verrà utilizzato lo scopo predefinito"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Impostazione di stampa disabilitata. Il file G-code non può essere modificato."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Consigliata"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizzata"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Inserita"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Disinserita"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Sperimentale"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Adesione"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Abilita stampa di brim o raft. Questa funzione aggiunge un’area piana attorno o sotto l’oggetto, facile da tagliare successivamente."
+msgid "Is printed as support."
+msgstr "Viene stampato come supporto."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Riempimento graduale"
+msgid "Other models overlapping with this model are modified."
+msgstr "Gli altri modelli che si sovrappongono a questo modello sono stati modificati."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Un riempimento graduale aumenterà gradualmente la quantità di riempimento verso l'alto."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Sono state modificate alcune impostazioni del profilo. Per modificarle, andare alla modalità personalizzata."
+msgid "Infill overlapping with this model is modified."
+msgstr "La sovrapposizione del riempimento con questo modello è stata modificata."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Supporto"
+msgid "Overlaps with this model are not supported."
+msgstr "Le sovrapposizioni con questo modello non sono supportate."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Genera strutture per supportare le parti del modello a sbalzo. Senza queste strutture, queste parti collasserebbero durante la stampa."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Ignora %1 impostazione."
+msgstr[1] "Ignora %1 impostazioni."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n"
-"\n"
-"Fare clic per rendere visibili queste impostazioni."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Questa impostazione non è utilizzata perché tutte le impostazioni che influenza sono sottoposte a override."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Modifica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Influisce su"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Es&tensioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Influenzato da"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referenze"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Questa impostazione è sempre condivisa tra tutti gli estrusori. La sua modifica varierà il valore per tutti gli estrusori."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Help"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Questa impostazione viene risolta dai valori in conflitto specifici dell'estrusore:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nuovo progetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Questa impostazione ha un valore diverso dal profilo.\n"
-"\n"
-"Fare clic per ripristinare il valore del profilo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Sei sicuro di voler aprire un nuovo progetto? Questo cancellerà il piano di stampa e tutte le impostazioni non salvate."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n"
-"\n"
-"Fare clic per ripristinare il valore calcolato."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Impostazioni ricerca"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copia valore su tutti gli estrusori"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copia tutti i valori modificati su tutti gli estrusori"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Nascondi questa impostazione"
+msgid "This package will be installed after restarting."
+msgstr "Questo pacchetto sarà installato dopo il riavvio."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Nascondi questa impostazione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Impostazioni"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Mantieni visibile questa impostazione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Chiusura di %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Visualizzazione 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Chiudere %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Visualizzazione frontale"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Installa il pacchetto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Visualizzazione superiore"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Apri file"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista sinistra"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Rilevata la presenza di uno o più file codice G tra i file selezionati. È possibile aprire solo un file codice G alla volta. Se desideri aprire un file codice G, selezionane uno solo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista destra"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Aggiungi stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Visualizza tipo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Scopri le novità"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Aggiungere una stampante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "La stampante cloud è offline. Verificare se la stampante è accesa e collegata a Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "In attesa della risposta del cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Questa stampante non è collegata al tuo account. Visitare Ultimaker Digital Factory per stabilire una connessione."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Non sono presenti stampanti nel cloud?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "La connessione cloud al momento non è disponibile. Accedere per collegarsi alla stampante cloud."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Le seguenti stampanti del tuo account sono state aggiunte in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "La connessione cloud al momento non è disponibile. Verificare la connessione a Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Aggiungere la stampante manualmente"
+msgid "Add printer"
+msgstr "Aggiungi stampante"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Fine"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Produttore"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autore profilo"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome stampante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Dare un nome alla stampante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Aggiungi una stampante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Aggiungi una stampante in rete"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Aggiungi una stampante non in rete"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Non è stata trovata alcuna stampante sulla rete."
+msgid "Manage printers"
+msgstr "Gestione stampanti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Aggiorna"
+msgid "Connected printers"
+msgstr "Stampanti collegate"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Aggiungi stampante per IP"
+msgid "Preset printers"
+msgstr "Stampanti preimpostate"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Aggiungere una stampante cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Stampa modello selezionato con %1"
+msgstr[1] "Stampa modelli selezionati con %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Ricerca e riparazione dei guasti"
+msgid "Time estimation"
+msgstr "Stima del tempo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Aggiungi stampante per indirizzo IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Inserire l'indirizzo IP della stampante."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Aggiungi"
+msgid "Material estimation"
+msgstr "Stima del materiale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Impossibile connettersi al dispositivo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Non è possibile effettuare la connessione alla stampante Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "La stampante a questo indirizzo non ha ancora risposto."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Sezionamento in corso..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Questa stampante non può essere aggiunta perché è una stampante sconosciuta o non è l'host di un gruppo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Sezionamento impossibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Indietro"
+msgid "Processing"
+msgstr "Elaborazione in corso"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Collega"
+msgid "Slice"
+msgstr "Sezionamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Account Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "La chiave per la stampa 3D connessa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personalizza la tua esperienza con più profili di stampa e plugin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Mantieni la flessibilità sincronizzando la configurazione e caricandola ovunque"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Aumenta l'efficienza grazie a un flusso di lavoro remoto sulle stampanti Ultimaker"
+msgid "Start the slicing process"
+msgstr "Avvia il processo di sezionamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Salta"
+msgid "Cancel"
+msgstr "Annulla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Aiutaci a migliorare Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Nessuna stima di tempo disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura acquisisce dati anonimi per migliorare la qualità di stampa e l'esperienza dell'utente, tra cui:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Nessuna stima di costo disponibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipi di macchine"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Anteprima"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilizzo dei materiali"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Fornisce il collegamento a caldo dell'unità rimovibile e il supporto per la scrittura."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Numero di sezionamenti"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Plugin dispositivo di output unità rimovibile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Impostazioni di stampa"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Aggiorna le configurazioni da Cura 3.5 a Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "I dati acquisiti da Ultimaker Cura non conterranno alcuna informazione personale."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Aggiornamento della versione da 3.5 a 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Ulteriori informazioni"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Aggiorna le configurazioni da Cura 4.6.2 a Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vuoto"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Aggiornamento versione da 4.6.2 a 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contratto di licenza"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Aggiorna le configurazioni da Cura 2.2 a Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rifiuta e chiudi"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Aggiornamento della versione da 2.2 a 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Benvenuto in Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Aggiorna le configurazioni da Cura 4.2 a Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Segui questa procedura per configurare\n"
-"Ultimaker Cura. Questa operazione richiederà solo pochi istanti."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Aggiornamento della versione da 4.2 a 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Per iniziare"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Aggiorna le configurazioni da Cura 4.6.0 a Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Scopri le novità in Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Aggiornamento versione da 4.6.0 a 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Controlla i modelli e la configurazione di stampa per eventuali problematiche di stampa e suggerimenti."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Aggiorna le configurazioni da Cura 3.0 a Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Controllo modello"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Aggiornamento della versione da 3.0 a 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fornisce il supporto per la lettura di file 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Aggiorna le configurazioni da Cura 4.0 a Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Lettore 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Aggiornamento della versione da 4.0 a 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Fornisce il supporto per la scrittura di file 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Aggiorna le configurazioni da Cura 2.6 a Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Writer 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Aggiornamento della versione da 2.6 a 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fornisce il supporto per la lettura di file 3MF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Aggiorna le configurazioni da Cura 2.5 a Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Lettore 3MF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Aggiornamento della versione da 2.5 a 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Effettua il backup o ripristina la configurazione."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Aggiorna le configurazioni da Cura 4.1 a Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Backup Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Aggiornamento della versione da 4.1 a 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fornisce il collegamento al back-end di sezionamento CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Aggiorna le configurazioni da Cura 2.1 a Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Back-end CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Aggiornamento della versione da 2.1 a 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fornisce supporto per l'importazione dei profili Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Aggiorna le configurazioni da Cura 3.2 a Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Lettore profilo Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Aggiornamento della versione da 3.2 a 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Fornisce supporto per l'esportazione dei profili Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Aggiorna le configurazioni da Cura 4.5 a Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Writer profilo Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Aggiornamento della versione da 4.5 a 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Controlla disponibilità di aggiornamenti firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Aggiorna le configurazioni da Cura 4.4 a Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Controllo aggiornamento firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Aggiornamento della versione da 4.4 a 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Fornisce azioni macchina per l’aggiornamento del firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Aggiorna le configurazioni da Cura 4.7 a Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aggiornamento firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Aggiornamento della versione da 4.7 a 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Legge il codice G da un archivio compresso."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Aggiorna le configurazioni da Cura 3.3 a Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lettore codice G compresso"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Aggiornamento della versione da 3.3 a 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Scrive il codice G in un archivio compresso."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Aggiorna le configurazioni da Cura 4.3 a Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Writer codice G compresso"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Aggiornamento della versione da 4.3 a 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Fornisce supporto per l'importazione di profili da file G-Code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Aggiorna le configurazioni da Cura 3.4 a Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Lettore profilo codice G"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Aggiornamento della versione da 3.4 a 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Consente il caricamento e la visualizzazione dei file codice G."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Aggiorna le configurazioni da Cura 2.7 a Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Lettore codice G"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Aggiornamento della versione da 2.7 a 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Scrive il codice G in un file."
+msgid "Provides support for reading AMF files."
+msgstr "Fornisce il supporto per la lettura di file 3MF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Writer codice G"
+msgid "AMF Reader"
+msgstr "Lettore 3MF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Abilita la possibilità di generare geometria stampabile da file immagine 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Fornisce supporto per l'importazione di profili da file G-Code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Lettore di immagine"
+msgid "G-code Profile Reader"
+msgstr "Lettore profilo codice G"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Fornisce supporto per l'importazione di profili dalle versioni legacy Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Fornisce azioni macchina per l’aggiornamento del firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lettore legacy profilo Cura"
+msgid "Firmware Updater"
+msgstr "Aggiornamento firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Fornisce un modo per modificare le impostazioni della macchina (come il volume di stampa, la dimensione ugello, ecc.)"
+msgid "Provides support for reading X3D files."
+msgstr "Fornisce il supporto per la lettura di file X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Azione Impostazioni macchina"
+msgid "X3D Reader"
+msgstr "Lettore X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fornisce una fase di controllo in Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Trova, gestisce ed installa nuovi pacchetti Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase di controllo"
+msgid "Toolbox"
+msgstr "Casella degli strumenti"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5616,75 +5726,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Post-elaborazione"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fornisce una fase di preparazione in Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fornisce il collegamento al back-end di sezionamento CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase di preparazione"
+msgid "CuraEngine Backend"
+msgstr "Back-end CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fornisce una fase di anteprima in Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Accetta i G-Code e li invia ad una stampante. I plugin possono anche aggiornare il firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase di anteprima"
+msgid "USB printing"
+msgstr "Stampa USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Fornisce il collegamento a caldo dell'unità rimovibile e il supporto per la scrittura."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Fornisce supporto per l'esportazione dei profili Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Plugin dispositivo di output unità rimovibile"
+msgid "Cura Profile Writer"
+msgstr "Writer profilo Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra determinati eventi in modo che possano essere utilizzati dal segnalatore dei crash"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gestisce le connessioni di rete alle stampanti Ultimaker in rete."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Logger sentinella"
+msgid "Ultimaker Network Connection"
+msgstr "Connessione di rete Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Fornisce la vista di simulazione."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Fornisce azioni macchina per le macchine Ultimaker (come la procedura guidata di livellamento del piano di stampa, la selezione degli aggiornamenti, ecc.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Vista simulazione"
+msgid "Ultimaker machine actions"
+msgstr "Azioni della macchina Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Invia informazioni su sezionamento anonime Può essere disabilitato tramite le preferenze."
+msgid "Provides support for reading 3MF files."
+msgstr "Fornisce il supporto per la lettura di file 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informazioni su sezionamento"
+msgid "3MF Reader"
+msgstr "Lettore 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Fornisce una normale visualizzazione a griglia compatta."
+msgid "Writes g-code to a compressed archive."
+msgstr "Scrive il codice G in un archivio compresso."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Visualizzazione compatta"
+msgid "Compressed G-code Writer"
+msgstr "Writer codice G compresso"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Legge il codice G da un archivio compresso."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lettore codice G compresso"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Controlla i modelli e la configurazione di stampa per eventuali problematiche di stampa e suggerimenti."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Controllo modello"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Controlla disponibilità di aggiornamenti firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Controllo aggiornamento firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Consente il caricamento e la visualizzazione dei file codice G."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Lettore codice G"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5696,16 +5846,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Cancellazione supporto"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Trova, gestisce ed installa nuovi pacchetti Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Casella degli strumenti"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5716,6 +5856,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh Reader"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra determinati eventi in modo che possano essere utilizzati dal segnalatore dei crash"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Logger sentinella"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5726,265 +5876,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Lettore UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Fornisce il supporto per la scrittura di pacchetti formato Ultimaker."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Writer UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Fornisce azioni macchina per le macchine Ultimaker (come la procedura guidata di livellamento del piano di stampa, la selezione degli aggiornamenti, ecc.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Fornisce supporto per l'importazione di profili dalle versioni legacy Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Azioni della macchina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lettore legacy profilo Cura"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gestisce le connessioni di rete alle stampanti Ultimaker in rete."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fornisce una fase di preparazione in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Connessione di rete Ultimaker"
+msgid "Prepare Stage"
+msgstr "Fase di preparazione"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Accetta i G-Code e li invia ad una stampante. I plugin possono anche aggiornare il firmware."
+msgid "Provides a monitor stage in Cura."
+msgstr "Fornisce una fase di controllo in Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Stampa USB"
+msgid "Monitor Stage"
+msgstr "Fase di controllo"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Aggiorna le configurazioni da Cura 2.1 a Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Fornisce la vista a raggi X."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Aggiornamento della versione da 2.1 a 2.2"
+msgid "X-Ray View"
+msgstr "Vista ai raggi X"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Aggiorna le configurazioni da Cura 2.2 a Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Fornisce il supporto per la scrittura di file 3MF."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Aggiornamento della versione da 2.2 a 2.4"
+msgid "3MF Writer"
+msgstr "Writer 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Aggiorna le configurazioni da Cura 2.5 a Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Invia informazioni su sezionamento anonime Può essere disabilitato tramite le preferenze."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Aggiornamento della versione da 2.5 a 2.6"
+msgid "Slice info"
+msgstr "Informazioni su sezionamento"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Aggiorna le configurazioni da Cura 2.6 a Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Fornisce una fase di anteprima in Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Aggiornamento della versione da 2.6 a 2.7"
+msgid "Preview Stage"
+msgstr "Fase di anteprima"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Aggiorna le configurazioni da Cura 2.7 a Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Fornisce la vista di simulazione."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Aggiornamento della versione da 2.7 a 3.0"
+msgid "Simulation View"
+msgstr "Vista simulazione"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Aggiorna le configurazioni da Cura 3.0 a Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Fornisce un modo per modificare le impostazioni della macchina (come il volume di stampa, la dimensione ugello, ecc.)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Aggiornamento della versione da 3.0 a 3.1"
+msgid "Machine Settings Action"
+msgstr "Azione Impostazioni macchina"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Aggiorna le configurazioni da Cura 3.2 a Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Offre la possibilità di leggere e scrivere profili di materiali basati su XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Aggiornamento della versione da 3.2 a 3.3"
+msgid "Material Profiles"
+msgstr "Profili del materiale"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Aggiorna le configurazioni da Cura 3.3 a Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Fornisce una normale visualizzazione a griglia compatta."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Aggiornamento della versione da 3.3 a 3.4"
+msgid "Solid View"
+msgstr "Visualizzazione compatta"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Aggiorna le configurazioni da Cura 3.4 a Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fornisce supporto per l'importazione dei profili Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Aggiornamento della versione da 3.4 a 3.5"
+msgid "Cura Profile Reader"
+msgstr "Lettore profilo Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Aggiorna le configurazioni da Cura 3.5 a Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Fornisce il supporto per la scrittura di pacchetti formato Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Aggiornamento della versione da 3.5 a 4.0"
+msgid "UFP Writer"
+msgstr "Writer UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Aggiorna le configurazioni da Cura 4.0 a Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Scrive il codice G in un file."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Aggiornamento della versione da 4.0 a 4.1"
+msgid "G-code Writer"
+msgstr "Writer codice G"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Aggiorna le configurazioni da Cura 4.1 a Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Abilita la possibilità di generare geometria stampabile da file immagine 2D."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Aggiornamento della versione da 4.1 a 4.2"
+msgid "Image Reader"
+msgstr "Lettore di immagine"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Aggiorna le configurazioni da Cura 4.2 a Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Effettua il backup o ripristina la configurazione."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Aggiornamento della versione da 4.2 a 4.3"
+msgid "Cura Backups"
+msgstr "Backup Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Aggiorna le configurazioni da Cura 4.3 a Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Pila globale mancante."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Aggiornamento della versione da 4.3 a 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Il modello in uso non è multiforme. Le aree evidenziate indicano superfici mancanti o estranee."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Aggiorna le configurazioni da Cura 4.4 a Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Errori modello"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Aggiornamento della versione da 4.4 a 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Spessore strato"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Aggiorna le configurazioni da Cura 4.5 a Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "La chiave per la stampa 3D connessa"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Aggiornamento della versione da 4.5 a 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personalizza la tua esperienza con più profili di stampa e plugin\n"
+#~ "- Mantieni la flessibilità sincronizzando la configurazione e caricandola ovunque\n"
+#~ "- Aumenta l'efficienza grazie a un flusso di lavoro remoto sulle stampanti Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Aggiorna le configurazioni da Cura 4.6.0 a Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Crea account"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Aggiornamento versione da 4.6.0 a 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Cancella modello selezionato"
+#~ msgstr[1] "Cancella modelli selezionati"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Aggiorna le configurazioni da Cura 4.6.2 a Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centra modello selezionato"
+#~ msgstr[1] "Centra modelli selezionati"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Aggiornamento versione da 4.6.2 a 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Moltiplica modello selezionato"
+#~ msgstr[1] "Moltiplica modelli selezionati"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Aggiorna le configurazioni da Cura 4.7 a Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Fine"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Aggiornamento della versione da 4.7 a 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Account Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fornisce il supporto per la lettura di file X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "La chiave per la stampa 3D connessa"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Lettore X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personalizza la tua esperienza con più profili di stampa e plugin"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Offre la possibilità di leggere e scrivere profili di materiali basati su XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Mantieni la flessibilità sincronizzando la configurazione e caricandola ovunque"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profili del materiale"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Aumenta l'efficienza grazie a un flusso di lavoro remoto sulle stampanti Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Fornisce la vista a raggi X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Segui questa procedura per configurare\n"
+#~ "Ultimaker Cura. Questa operazione richiederà solo pochi istanti."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista ai raggi X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Scopri le novità in Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/it_IT/fdmextruder.def.json.po b/resources/i18n/it_IT/fdmextruder.def.json.po
index 6f8bb576b3..cea388cf2e 100644
--- a/resources/i18n/it_IT/fdmextruder.def.json.po
+++ b/resources/i18n/it_IT/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Italian\n"
diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po
index 7539cd64d8..79f17396c4 100644
--- a/resources/i18n/it_IT/fdmprinter.def.json.po
+++ b/resources/i18n/it_IT/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Italian <info@lionbridge.com>, Italian <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Indica se gli estrusori condividono un singolo riscaldatore piuttosto che avere ognuno il proprio."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Aree non consentite"
@@ -486,8 +506,8 @@ msgstr "Offset con estrusore"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Applicare l’offset estrusore al sistema coordinate."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Moltiplicatore della larghezza della linea del primo strato Il suo aumen
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Guscio"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Distanza di spostamento inserita dopo la parete esterna per nascondere meglio la giunzione Z."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Estrusore rivestimento superficie superiore"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Treno estrusore utilizzato per stampare il rivestimento più in alto. Si utilizza nell'estrusione multipla."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Strati di rivestimento superficie superiore"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Numero degli strati di rivestimento superiori. Solitamente è sufficiente un unico strato di sommità per ottenere superfici superiori di qualità elevata."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Estrusore superiore/inferiore"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Treno estrusore utilizzato per stampare il rivestimento superiore e quello inferiore. Si utilizza nell'estrusione multipla."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Spessore dello strato superiore/inferiore"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Indica lo spessore degli strati superiore/inferiore nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati superiori/inferiori."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Spessore dello strato superiore"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Indica lo spessore degli strati superiori nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati superiori."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Strati superiori"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Indica il numero degli strati superiori. Quando calcolato mediante lo spessore dello strato superiore, il valore viene arrotondato a numero intero."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Spessore degli strati inferiori"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Indica lo spessore degli strati inferiori nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati inferiori."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Strati inferiori"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Indica il numero degli strati inferiori. Quando calcolato mediante lo spessore dello strato inferiore, il valore viene arrotondato a numero intero."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Layer inferiori iniziali"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Il numero di layer inferiori iniziali, dal piano di stampa verso l'alto. Quando viene calcolato mediante lo spessore inferiore, questo valore viene arrotondato a un numero intero."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Configurazione dello strato superiore/inferiore"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Indica la configurazione degli strati superiori/inferiori."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linee"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concentriche"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Strato iniziale configurazione inferiore"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "La configurazione al fondo della stampa sul primo strato."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linee"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concentriche"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zig Zag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Collega poligoni superiori/inferiori"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Collega i percorsi del rivestimento esterno superiore/inferiore quando corrono uno accanto all’altro. Per le configurazioni concentriche, l’abilitazione di questa impostazione riduce notevolmente il tempo di spostamento, tuttavia poiché i collegamenti possono aver luogo a metà del riempimento, con questa funzione la qualità della superficie superiore potrebbe risultare inferiore."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Direzioni delle linee superiori/inferiori"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Un elenco di direzioni linee intere da usare quando gli strati superiori/inferiori utilizzano le linee o la configurazione zig zag. Gli elementi dall’elenco sono utilizzati in sequenza con il progredire degli strati e, al raggiungimento della fine dell’elenco, la sequenza ricomincia dall’inizio. Le voci elencate sono separate da virgole e l’intero elenco è racchiuso tra parentesi quadre. L’elenco predefinito è vuoto, vale a dire che utilizza i valori angolari predefiniti (45 e 135 gradi)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Inserto parete esterna"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Se abilitato, le coordinate della giunzione Z sono riferite al centro di ogni parte. Se disabilitato, le coordinate definiscono una posizione assoluta sul piano di stampa."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Estrusore rivestimento superficie superiore"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Treno estrusore utilizzato per stampare il rivestimento più in alto. Si utilizza nell'estrusione multipla."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Strati di rivestimento superficie superiore"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Numero degli strati di rivestimento superiori. Solitamente è sufficiente un unico strato di sommità per ottenere superfici superiori di qualità elevata."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Estrusore superiore/inferiore"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Treno estrusore utilizzato per stampare il rivestimento superiore e quello inferiore. Si utilizza nell'estrusione multipla."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Spessore dello strato superiore/inferiore"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Indica lo spessore degli strati superiore/inferiore nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati superiori/inferiori."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Spessore dello strato superiore"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Indica lo spessore degli strati superiori nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati superiori."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Strati superiori"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Indica il numero degli strati superiori. Quando calcolato mediante lo spessore dello strato superiore, il valore viene arrotondato a numero intero."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Spessore degli strati inferiori"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Indica lo spessore degli strati inferiori nella stampa. Questo valore diviso per la l’altezza dello strato definisce il numero degli strati inferiori."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Strati inferiori"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Indica il numero degli strati inferiori. Quando calcolato mediante lo spessore dello strato inferiore, il valore viene arrotondato a numero intero."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Layer inferiori iniziali"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Il numero di layer inferiori iniziali, dal piano di stampa verso l'alto. Quando viene calcolato mediante lo spessore inferiore, questo valore viene arrotondato a un numero intero."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Configurazione dello strato superiore/inferiore"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Indica la configurazione degli strati superiori/inferiori."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linee"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concentriche"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Strato iniziale configurazione inferiore"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "La configurazione al fondo della stampa sul primo strato."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linee"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concentriche"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zig Zag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Collega poligoni superiori/inferiori"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Collega i percorsi del rivestimento esterno superiore/inferiore quando corrono uno accanto all’altro. Per le configurazioni concentriche, l’abilitazione di questa impostazione riduce notevolmente il tempo di spostamento, tuttavia poiché i collegamenti possono aver luogo a metà del riempimento, con questa funzione la qualità della superficie superiore potrebbe risultare inferiore."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Direzioni delle linee superiori/inferiori"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Un elenco di direzioni linee intere da usare quando gli strati superiori/inferiori utilizzano le linee o la configurazione zig zag. Gli elementi dall’elenco sono utilizzati in sequenza con il progredire degli strati e, al raggiungimento della fine dell’elenco, la sequenza ricomincia dall’inizio. Le voci elencate sono separate da virgole e l’intero elenco è racchiuso tra parentesi quadre. L’elenco predefinito è vuoto, vale a dire che utilizza i valori angolari predefiniti (45 e 135 gradi)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Nessun rivest. est. negli interstizi a Z"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Regolare l’entità della sovrapposizione tra le pareti e (i punti finali delle) linee centrali del rivestimento esterno. Una leggera sovrapposizione consente alle pareti di essere saldamente collegate al rivestimento. Si noti che, data una larghezza uguale del rivestimento esterno e della linea perimetrale, qualsiasi percentuale superiore alla metà della parete può già causare il superamento della parete da parte del rivestimento esterno in quanto, in quel punto, la posizione dell’ugello dell’estrusore del rivestimento esterno può già aver superato la parte centrale della parete."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Larghezza rimozione rivestimento"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Larghezza massima delle aree di rivestimento che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore/inferiore sulle superfici inclinate del modello."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Larghezza rimozione rivestimento superiore"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Larghezza massima delle aree di rivestimento superiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore sulle superfici inclinate del modello."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Larghezza rimozione rivestimento inferiore"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Larghezza massima delle aree di rivestimento inferiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento inferiore sulle superfici inclinate del modello."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Distanza prolunga rivestimento esterno"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Distanza per cui i rivestimenti si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti degli strati adiacenti. Valori minori consentono di risparmiare sul materiale utilizzato."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Distanza prolunga rivestimento superiore"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Distanza per cui i rivestimenti superiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato superiore. Valori minori consentono di risparmiare sul materiale utilizzato."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Distanza prolunga rivestimento inferiore"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Distanza per cui i rivestimenti inferiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato inferiore. Valori minori consentono di risparmiare sul materiale utilizzato."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Angolo massimo rivestimento esterno per prolunga"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Larghezza minima rivestimento esterno per prolunga"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Le aree del rivestimento esterno inferiori a questa non vengono prolungate. In tal modo si evita di prolungare le aree del rivestimento esterno strette che vengono create quando la superficie del modello presenta un’inclinazione quasi verticale."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Riempimento"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "L'angolo minimo degli sbalzi interni per il quale viene aggiunto il riempimento. Per un valore corrispondente a 0°, gli oggetti sono completamente riempiti di materiale, per un valore corrispondente a 90° non è previsto riempimento."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Larghezza rimozione rivestimento"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Larghezza massima delle aree di rivestimento che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore/inferiore sulle superfici inclinate del modello."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Larghezza rimozione rivestimento superiore"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Larghezza massima delle aree di rivestimento superiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore sulle superfici inclinate del modello."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Larghezza rimozione rivestimento inferiore"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Larghezza massima delle aree di rivestimento inferiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento inferiore sulle superfici inclinate del modello."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Distanza prolunga rivestimento esterno"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Distanza per cui i rivestimenti si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti degli strati adiacenti. Valori minori consentono di risparmiare sul materiale utilizzato."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Distanza prolunga rivestimento superiore"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Distanza per cui i rivestimenti superiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato superiore. Valori minori consentono di risparmiare sul materiale utilizzato."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Distanza prolunga rivestimento inferiore"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Distanza per cui i rivestimenti inferiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato inferiore. Valori minori consentono di risparmiare sul materiale utilizzato."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Angolo massimo rivestimento esterno per prolunga"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Per le superfici inferiori e/o superiori dell’oggetto con un angolo maggiore di questa impostazione non verrà prolungato il rivestimento esterno superiore/inferiore. In tal modo si evita di prolungare le aree del rivestimento esterno strette create quando la superficie del modello ha un’inclinazione prossima al verticale. Un angolo di 0° è orizzontale, mentre un angolo di 90° è verticale."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Larghezza minima rivestimento esterno per prolunga"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Le aree del rivestimento esterno inferiori a questa non vengono prolungate. In tal modo si evita di prolungare le aree del rivestimento esterno strette che vengono create quando la superficie del modello presenta un’inclinazione quasi verticale."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Spessore del supporto del bordo del rivestimento"
@@ -2071,8 +2101,7 @@ msgstr "Temperatura piano di stampa Strato iniziale"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr "Indica la temperatura usata per il piano di stampa riscaldato per il primo strato. Se questo valore è 0, il piano di stampa viene lasciato non riscaldato"
-" per il primo strato."
+msgstr "Indica la temperatura usata per il piano di stampa riscaldato per il primo strato. Se questo valore è 0, il piano di stampa viene lasciato non riscaldato per il primo strato."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2561,8 +2590,8 @@ msgstr "Velocità di stampa dello strato iniziale"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Indica la velocità per lo strato iniziale. Un valore inferiore è consigliabile per migliorare l’adesione al piano di stampa."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,10 +5104,8 @@ msgstr "Classificazione dell'elaborazione delle maglie"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Determina la priorità di questa mesh quando si considera la sovrapposizione multipla delle mesh di riempimento. Per le aree con la sovrapposizione di più"
-" mesh di riempimento verranno utilizzate le impostazioni della mesh con la classificazione più bassa. Una mesh di riempimento con un ordine più alto modificherà"
-" il riempimento delle mesh di riempimento con un ordine inferiore e delle mesh normali."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5426,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "L’angolo massimo degli sbalzi dopo essere stati resi stampabili. A un valore di 0° tutti gli sbalzi sono sostituiti da un pezzo del modello collegato al piano di stampa, 90° non cambia il modello in alcun modo."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Abilitazione della funzione di Coasting"
@@ -6364,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matrice di rotazione da applicare al modello quando caricato dal file."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Applicare l’offset estrusore al sistema coordinate."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Guscio"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Per le superfici inferiori e/o superiori dell’oggetto con un angolo maggiore di questa impostazione non verrà prolungato il rivestimento esterno superiore/inferiore. In tal modo si evita di prolungare le aree del rivestimento esterno strette create quando la superficie del modello ha un’inclinazione prossima al verticale. Un angolo di 0° è orizzontale, mentre un angolo di 90° è verticale."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Indica la velocità per lo strato iniziale. Un valore inferiore è consigliabile per migliorare l’adesione al piano di stampa."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Determina la priorità di questa mesh quando si considera la sovrapposizione multipla delle mesh di riempimento. Per le aree con la sovrapposizione di più mesh di riempimento verranno utilizzate le impostazioni della mesh con la classificazione più bassa. Una mesh di riempimento con un ordine più alto modificherà il riempimento delle mesh di riempimento con un ordine inferiore e delle mesh normali."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Indica la temperatura usata per il piano di stampa riscaldato. Se è 0, la temperatura del piano non si regola."
diff --git a/resources/i18n/ja_JP/cura.po b/resources/i18n/ja_JP/cura.po
index 4344a6da8d..bd6a1cc77b 100644
--- a/resources/i18n/ja_JP/cura.po
+++ b/resources/i18n/ja_JP/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Japanese <info@lionbridge.com>, Japanese <info@bothof.nl>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.2.4\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "不明"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "プリンターを読み込み中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "下のプリンターはグループの一員であるため接続できません"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "プレファレンスをセットアップ中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "ネットワークで利用可能なプリンター"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "アクティブなプリンターを初期化中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "上書きできません"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "プリンターマネージャーを初期化中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "{0}を取り除いてもよろしいですか？この操作は元に戻せません。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "ビルドボリュームを初期化中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "シーンをセットアップ中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "ビジュアル"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "インターフェイスを読み込み中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "ビジュアルプロファイルは、優れたビジュアルと表面品質を目的としたビジュアルプロトタイプやモデルをプリントするために設計されています。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "エンジンを初期化中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "エンジニアリングプロファイルは、精度向上と公差の厳格対応を目的とした機能プロトタイプや最終用途部品をプリントするために設計されています。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一度に一つのG-codeしか読み取れません。{0}の取り込みをスキップしました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "ドラフト"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "ドラフトプロファイルは、プリント時間の大幅短縮を目的とした初期プロトタイプとコンセプト検証をプリントするために設計されています。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-codeを読み込み中は他のファイルを開くことができません。{0}の取り込みをスキップしました。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "エラー"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "{0}を取り除いてもよろしいですか？この操作は元に戻せません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "カスタムフィラメント"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "カスタム"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "不明"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "カスタムプロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "すべてのサポートのタイプ ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "全てのファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "ログインに失敗しました"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "造形物のために新しい位置を探索中"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "位置確認"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "ビジュアル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "全ての造形物の造形サイズに対し、適切な位置が確認できません"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "ビジュアルプロファイルは、優れたビジュアルと表面品質を目的としたビジュアルプロトタイプやモデルをプリントするために設計されています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "位置を確保できません"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "ユーザーデータディレクトリからアーカイブを作成できません: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "エンジニアリングプロファイルは、精度向上と公差の厳格対応を目的とした機能プロトタイプや最終用途部品をプリントするために設計されています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "バックアップ"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "ドラフト"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "適切なデータまたはメタデータがないのにCuraバックアップをリストアしようとしました。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "ドラフトプロファイルは、プリント時間の大幅短縮を目的とした初期プロトタイプとコンセプト検証をプリントするために設計されています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "現行バージョンより上の Cura バックアップをリストアしようとしました。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "下のプリンターはグループの一員であるため接続できません"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "プリントシークエンス設定値により、ガントリーと造形物の衝突を避けるため印刷データの高さを低くしました。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "ネットワークで利用可能なプリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "造形サイズ"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "上書きできません"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Curaを開始できません"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>問題解決のために、このクラッシュ報告をお送りください。</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "クラッシュ報告をUltimakerに送信する"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "詳しいクラッシュ報告を表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "コンフィグレーションのフォルダーを表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "バックアップとリセットの設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "クラッシュ報告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1192 +249,848 @@ msgstr ""
 "            <p>「レポート送信」ボタンを使用してバグレポートが自動的に当社サーバーに送られるようにしてください</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "システム情報"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "不明"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Curaバージョン"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura言語"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "OS言語"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "プラットフォーム"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qtバージョン"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQtバージョン"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "初期化されていません<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGLバージョン: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGLベンダー: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGLレンダラー: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "エラー・トレースバック"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "ログ"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "レポート送信"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "プリンターを読み込み中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "プレファレンスをセットアップ中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "アクティブなプリンターを初期化中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "プリンターマネージャーを初期化中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "ビルドボリュームを初期化中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "シーンをセットアップ中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "インターフェイスを読み込み中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "エンジンを初期化中..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一度に一つのG-codeしか読み取れません。{0}の取り込みをスキップしました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-codeを読み込み中は他のファイルを開くことができません。{0}の取り込みをスキップしました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "エラー"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "造形データを増やす、配置する"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "造形データを配置"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "造形データを配置"
+msgid "Login failed"
+msgstr "ログインに失敗しました"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "応答を読み取れません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "新しいサインインプロセスを開始できません。別のサインインの試行がアクティブなままになっていないか確認します。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker アカウントサーバーに到達できません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "指定された状態が正しくありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "このアプリケーションの許可において必要な権限を与えてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "ログイン時に予期しないエラーが発生しました。やり直してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "新しいサインインプロセスを開始できません。別のサインインの試行がアクティブなままになっていないか確認します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker アカウントサーバーに到達できません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "すでに存在するファイルです"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "<filename>{0}</filename> は既に存在します。ファイルを上書きしますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "無効なファイルのURL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "ノズル"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "現在利用可能な次のエクストルーダーに合わせて設定が変更されました:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "設定が更新されました"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "エクストルーダーを無効にしました"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename>にプロファイルを書き出すのに失敗しました: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "<filename>{0}</filename>にプロファイルを書き出すことに失敗しました。：ライタープラグイン失敗の報告。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "<filename>{0}</filename>にプロファイルを書き出しました"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "書き出し完了"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました:{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "プリンタを追加する前に、<filename>{0}</filename>からプロファイルの取り込はできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "ファイル<filename>{0}</filename>にはカスタムプロファイルがインポートされていません"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename>からプロファイルの取り込に失敗しました:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "このプロファイル<filename>{0}</filename>には、正しくないデータが含まれているため、インポートできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename>からプロファイルの取り込みに失敗しました:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "プロファイル{0}の取り込みが完了しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "ファイル{0}には、正しいプロファイルが含まれていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "プロファイル{0}は不特定なファイルまたは破損があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "カスタムプロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "プロファイルはクオリティータイプが不足しています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "グローバルスタックがありません。"
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "プロファイルを追加できません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "クオリティータイプ「{0}」は、現在アクティブなプリンター定義「{1}」と互換性がありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "警告：現在の構成ではクオリティータイプ「{0}」を使用できないため、プロファイルは表示されません。このクオリティータイプを使用できる材料/ノズルの組み合わせに切り替えてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "サポート対象外"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "ノズル"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "現在利用可能な次のエクストルーダーに合わせて設定が変更されました:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "造形物のために新しい位置を探索中"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "設定が更新されました"
+msgid "Finding Location"
+msgstr "位置確認"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "全ての造形物の造形サイズに対し、適切な位置が確認できません"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "エクストルーダーを無効にしました"
+msgid "Can't Find Location"
+msgstr "位置を確保できません"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "グループ #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "追加"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "終わる"
+msgid "Close"
+msgstr "閉める"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "キャンセル"
+msgid "Next"
+msgstr "次"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "グループ #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "終わる"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "アウターウォール"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "インナーウォール"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "スキン"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "インフィル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "サポートイルフィル"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "サポートインターフェイス"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "サポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "スカート"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "プライムタワー"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "退却"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "他"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "次"
+msgid "Add"
+msgstr "追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "閉める"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3Dモデルアシスタント"
+msgid "Cancel"
+msgstr "キャンセル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>モデルのサイズまたは材料の設定によっては、適切に印刷しない3Dモデルがあります。:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>可能な限り最高の品質および信頼性を得る方法をご覧ください。</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">印字品質ガイドを見る</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "プロジェクトファイル <filename>{0}</filename> に不明なマシンタイプ <message>{1}</message> があります。マシンをインポートできません。代わりにモデルをインポートします。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "プロジェクトファイルを開く"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "プロジェクトファイル<filename>{0}</filename>が突然アクセスできなくなりました：<message>{1}</message>。"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "プリントシークエンス設定値により、ガントリーと造形物の衝突を避けるため印刷データの高さを低くしました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "プロジェクトファイルを開けません"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "プロジェクトファイル<filename>{0}</filename>はこのバージョンのUltimaker Curaでは認識できないプロファイルを使用して作成されています。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推奨"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "カスタム"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF ファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MFリーダーのプラグインが破損しています。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "この作業スペースに書き込む権限がありません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "使用しているオペレーティングシステムでは、この場所またはこのファイル名でプロジェクトファイルを保存することはできません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "3Mf ファイルの書き込みエラー。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MFファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Curaが3MF fileを算出します"
+msgid "Build Volume"
+msgstr "造形サイズ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF ファイル"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "ユーザーデータディレクトリからアーカイブを作成できません: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Backups"
+msgid "Backup"
 msgstr "バックアップ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "バックアップのアップロード中にエラーが発生しました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "バックアップを作成しています..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "バックアップの作成中にエラーが発生しました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "バックアップをアップロードしています..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "バックアップのアップロードを完了しました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "バックアップが最大ファイルサイズを超えています。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "バックアップのリストア中にエラーが発生しました。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "バックアップを管理する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "選ばれたプリンターまたは選ばれたプリント構成が異なるため進行中の材料にてスライスを完了できません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "スライスできません"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "現在の設定でスライスが完了できません。以下の設定にエラーがあります: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "モデル別の設定があるためスライスできません。1つまたは複数のモデルで以下の設定にエラーが発生しました：{error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "プライムタワーまたはプライム位置が無効なためスライスできません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "無効な Extruder %s に関連付けられている造形物があるため、スライスできません。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "適切なデータまたはメタデータがないのにCuraバックアップをリストアしようとしました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"設定を見直し、モデルが次の状態かどうかを確認してください。\n"
-"- 造形サイズに合っている\n"
-"- 有効なエクストルーダーに割り当てられている\n"
-"- すべてが修飾子メッシュとして設定されているわけではない"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "現行バージョンより上の Cura バックアップをリストアしようとしました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "レイヤーを処理しています"
+msgid "Multiplying and placing objects"
+msgstr "造形データを増やす、配置する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "インフォメーション"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Curaプロファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "必要なアップデートの情報にアクセスできません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "お使いの{machine_name}について新機能またはバグ修正が利用できる可能性があります。まだ最新のバージョンでない場合は、プリンターのファームウェアをバージョン{latest_version}に更新することを推奨します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "新しい利用可能な%sファームウェアのアップデートがあります"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "アップデートの仕方"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "ファームウェアアップデート"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "圧縮G-codeファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter はテキストモードをサポートしていません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-codeファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-codeを解析"
+msgid "Placing Objects"
+msgstr "造形データを配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-codeの詳細"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "データファイルを送信する前に、プリンターとプリンターの構成設定にそのG-codeが適応しているか確認してください。G-codeの表示が適切でない場合があります。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Gファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter は非テキストモードはサポートしていません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "エクスポートする前にG-codeの準備をしてください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG画像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG画像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG画像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP画像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF画像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 プロファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "プリンターの設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "モニター"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "各モデル設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "各モデル構成設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "後処理"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-codeを修正"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "準備する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "プレビュー"
+msgid "Placing Object"
+msgstr "造形データを配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "リムーバブルドライブに保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "リムーバブルドライブ{0}に保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "書き出すために利用可能な形式のファイルがありません！"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "リムーバブルドライブ<filename>{0}</filename>に保存中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "保存中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename>を保存できませんでした: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "デバイス{device}に書き出すためのファイル名が見つかりませんでした。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "リムーバブルドライブ{0}に保存することができませんでした: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "リムーバブルドライブ{0}に {1}として保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "ファイル保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "取り出す"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "リムーバブルデバイス{0}を取り出す"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0}取り出し完了。デバイスを安全に取り外せます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "ハードウェアを安全に取り外します"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "{0}取り出し失敗。他のプログラムがデバイスを使用しているため。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "リムーバブルドライブ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Curaはワイヤープリンティングが有効な場合は正確にレイヤーを表示しません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "シミュレーションビュー"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "最初にスライスする必要があるため、何も表示されません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "表示するレイヤーがありません"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "今後このメッセージを表示しない"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "レイヤービュー"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "モデルはマニホールドではありません。ハイライトされたエリアは、欠けている表面または無関係な表面を示します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "モデルエラー"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "ソリッドビュー"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "サポートブロッカー"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "サポートが印刷されないボリュームを作成します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "材料パッケージとソフトウェアパッケージをアカウントと同期しますか？"
+msgid "AMF File"
+msgstr "AMF ファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimakerアカウントから変更が検出されました"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-codeファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同期"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "ファームウェアアップデート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "同期中..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3Dファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "拒否する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "同意する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "プラグインライセンス同意書"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "拒否してアカウントから削除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{}プラグインのダウンロードに失敗しました"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "同期中..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Ultimakerアカウントから変更が検出されました"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "変更を有効にするために{}を終了して再始動する必要があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{}プラグインのダウンロードに失敗しました"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "材料パッケージとソフトウェアパッケージをアカウントと同期しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "圧縮トライアングルメッシュを開く"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "同期"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "各モデル設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTFバイナリ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "各モデル構成設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF埋め込みJSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "後処理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-codeを修正"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "圧縮COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "選ばれたプリンターまたは選ばれたプリント構成が異なるため進行中の材料にてスライスを完了できません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimakerフォーマットパッケージ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "スライスできません"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFPファイルに書き込めません："
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "現在の設定でスライスが完了できません。以下の設定にエラーがあります: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "ビルドプレートを調整する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "モデル別の設定があるためスライスできません。1つまたは複数のモデルで以下の設定にエラーが発生しました：{error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "アップグレードを選択する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "プライムタワーまたはプライム位置が無効なためスライスできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "クラウドからプリントする"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "無効な Extruder %s に関連付けられている造形物があるため、スライスできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "クラウドからプリントする"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"設定を見直し、モデルが次の状態かどうかを確認してください。\n"
+"- 造形サイズに合っている\n"
+"- 有効なエクストルーダーに割り当てられている\n"
+"- すべてが修飾子メッシュとして設定されているわけではない"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "クラウド経由で接続"
+msgid "Processing Layers"
+msgstr "レイヤーを処理しています"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "プリントジョブのアップロード時の不明なエラーコード：{0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "インフォメーション"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USBプリンティング"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USBを使ってプリントする"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USBを使ってプリントする"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USBにて接続する"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USBプリントを実行しています。Cura を閉じるとこのプリントも停止します。実行しますか？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "現在印刷中です。Curaは、前の印刷が完了するまでUSBを介した次の印刷を開始できません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "現在印刷中"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Curaプロファイル"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "ネットワーク上にて接続"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimakerアカウントから新しいプリンターが検出されました"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "アカウントからプリンター{name}（{model}）を追加しています"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "...および{0}その他"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factoryからプリンターが追加されました："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "一部のプリンターではクラウド接続は利用できません"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "これらのプリンターはDigital Factoryとリンクされていません："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "接続を確立するには、{website_link}にアクセスしてください"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "プリンターの構成を維持"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "プリンターを取り除く"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "次回のアカウントの同期までに{printer_name}は削除されます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name}を完全に削除するには、{digital_factory_link}にアクセスしてください"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "{printer_name}を一時的に削除してもよろしいですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "プリンターを削除しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1430,4155 +1099,4596 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "Curaから{0}台のプリンターを削除しようとしています。この操作は元に戻せません。\n続行してもよろしいですか？"
+msgstr[0] ""
+"Curaから{0}台のプリンターを削除しようとしています。この操作は元に戻せません。\n"
+"続行してもよろしいですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "Curaからすべてのプリンターを削除しようとしています。この操作は元に戻せません。\n続行してもよろしいですか？"
+msgstr ""
+"Curaからすべてのプリンターを削除しようとしています。この操作は元に戻せません。\n"
+"続行してもよろしいですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Ultimaker のアカウントを使用して、どこからでも印刷ジョブを送信およびモニターします。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "クラウドからプリントする"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factoryに接続"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "クラウドからプリントする"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "はじめに"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "クラウド経由で接続"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "プリントジョブのアップロード時の不明なエラーコード：{0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connectを実行していないプリンターに接続しようとしています。プリンターを最新のファームウェアに更新してください。"
+msgid "tomorrow"
+msgstr "翌日"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "プリンターの更新"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "本日"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Curaはグループ{0}のホストプリンターにまだインストールされていない材料プロフィールを検出しました。"
+msgid "Sending Print Job"
+msgstr "印刷ジョブ送信中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "プリンターに材料を送信しています"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "プリントジョブをプリンターにアップロードしています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "{0}に接続を試みていますが、これはグループのホストではありません。グループホストとして設定するには、ウェブページを参照してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "グループホストではありません"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "グループの設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Ultimaker のアカウントを使用して、どこからでも印刷ジョブを送信およびモニターします。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factoryに接続"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "はじめに"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "現在のジョブが送信されるまで待機してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "印刷エラー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "データをプリンタにアップロードできませんでした。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "ネットワークエラー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "印刷ジョブ送信中"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Curaはグループ{0}のホストプリンターにまだインストールされていない材料プロフィールを検出しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "プリントジョブをプリンターにアップロードしています。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "プリンターに材料を送信しています"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "プリントジョブのキューがいっぱいです。プリンターは新しいジョブを処理できません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "キューがいっぱい"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "プリントジョブは正常にプリンターに送信されました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "データを送信しました"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connectを実行していないプリンターに接続しようとしています。プリンターを最新のファームウェアに更新してください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "プリンターの更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "ネットワーク上のプリント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "ネットワークのプリント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "ネットワーク上で接続"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "ネットワーク上にて接続"
+msgid "Select upgrades"
+msgstr "アップグレードを選択する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "翌日"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "ビルドプレートを調整する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "本日"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推奨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USBプリンティング"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "カスタム"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USBを使ってプリントする"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "プロジェクトファイル <filename>{0}</filename> に不明なマシンタイプ <message>{1}</message> があります。マシンをインポートできません。代わりにモデルをインポートします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USBを使ってプリントする"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "プロジェクトファイルを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USBにて接続する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "プロジェクトファイル<filename>{0}</filename>が突然アクセスできなくなりました：<message>{1}</message>。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USBプリントを実行しています。Cura を閉じるとこのプリントも停止します。実行しますか？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "プロジェクトファイルを開けません"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "現在印刷中です。Curaは、前の印刷が完了するまでUSBを介した次の印刷を開始できません。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "現在印刷中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "プロジェクトファイル<filename>{0}</filename>はこのバージョンのUltimaker Curaでは認識できないプロファイルを使用して作成されています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3Dファイル"
+msgid "3MF File"
+msgstr "3MF ファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透視ビューイング"
+msgid "Compressed G-code File"
+msgstr "圧縮G-codeファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "このプリントの何かが問題です。クリックして調整のヒントをご覧ください。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter はテキストモードをサポートしていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "プロジェクトを開く"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3Dモデルアシスタント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "既存を更新する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>モデルのサイズまたは材料の設定によっては、適切に印刷しない3Dモデルがあります。:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>可能な限り最高の品質および信頼性を得る方法をご覧ください。</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">印字品質ガイドを見る</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新しいものを作成する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "必要なアップデートの情報にアクセスできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "サマリーCuraプロジェクト"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "お使いの{machine_name}について新機能またはバグ修正が利用できる可能性があります。まだ最新のバージョンでない場合は、プリンターのファームウェアをバージョン{latest_version}に更新することを推奨します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "プリンターの設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "新しい利用可能な%sファームウェアのアップデートがあります"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "このプリンターの問題をどのように解決すればいいか？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "アップデートの仕方"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "タイプ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Gファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "プリンターグループ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-codeを解析"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "プロファイル設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-codeの詳細"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "データファイルを送信する前に、プリンターとプリンターの構成設定にそのG-codeが適応しているか確認してください。G-codeの表示が適切でない場合があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "サポートブロッカー"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "このプロファイルの問題をどのように解決すればいいか？"
+msgid "Create a volume in which supports are not printed."
+msgstr "サポートが印刷されないボリュームを作成します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "ネーム"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "圧縮トライアングルメッシュを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "プロファイル内にない"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTFバイナリ"
 
-# Can’t edit the Japanese text
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1個の設定を上書き"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF埋め込みJSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "次から引き出す"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-# can’t inset the japanese text
-# %1: print quality profile name
-# %2: number of overridden ssettings
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%2の%1個の設定を上書き"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "圧縮COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "フィラメント設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimakerフォーマットパッケージ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "このフィラメントの問題をどのように解決すればいいか？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 プロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "視野設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "準備する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "モード"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "モニター"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "ビジブル設定:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透視ビューイング"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%2のうち%1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "3Mf ファイルの書き込みエラー。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "プロジェクトを読み込むとビルドプレート上のすべてのモデルがクリアされます。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MFファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "開く"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Curaが3MF fileを算出します"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "詳しく知りたい？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MFリーダーのプラグインが破損しています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "今すぐバックアップする"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "この作業スペースに書き込む権限がありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自動バックアップ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "使用しているオペレーティングシステムでは、この場所またはこのファイル名でプロジェクトファイルを保存することはできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura を起動した日は常にバックアップを自動生成します。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "プレビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "リストア"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "レイヤービュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "バックアップの削除"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Curaはワイヤープリンティングが有効な場合は正確にレイヤーを表示しません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "このバックアップを削除しますか？これは取り消しできません。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "シミュレーションビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "バックアップのリストア"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "最初にスライスする必要があるため、何も表示されません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "バックアップをリストアする前に Cura を再起動する必要があります。今すぐ Cura を閉じますか？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "表示するレイヤーがありません"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura バージョン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "今後このメッセージを表示しない"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "プリンタ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "プリンターの設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "材料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "ソリッドビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "プラグイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura バックアップ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "マイ バックアップ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFPファイルに書き込めません："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "現在バックアップは存在しません。[今すぐバックアップする] を使用して作成してください。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter は非テキストモードはサポートしていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "プレビューではバックアップは5つまでに制限されています。古いバックアップは削除してください。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "エクスポートする前にG-codeの準備をしてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura のバックアップおよび同期を設定します。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG画像"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "サインイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG画像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG画像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP画像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF画像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "バックアップのリストア中にエラーが発生しました。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "バックアップ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "バックアップのアップロード中にエラーが発生しました。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "バックアップを作成しています..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "バックアップの作成中にエラーが発生しました。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "バックアップをアップロードしています..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "バックアップのアップロードを完了しました。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "バックアップが最大ファイルサイズを超えています。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "バックアップを管理する"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "ファームウェアアップデート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "ファームウェアとは直接お持ちの3Dプリンターを動かすソフトウェアです。このファームウェアはステップモーターを操作し、温度を管理し、プリンターとして成すべき点を補います。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "配達時のファームウェアで動かすことはできますが、新しいバージョンの方がより改善され、便利なフィーチャーがついてきます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "自動でファームウェアをアップグレード"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "カスタムファームウェアをアップロードする"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "プリンターと接続されていないため、ファームウェアをアップデートできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "プリンターとの接続はファームウェアのアップデートをサポートしていないため、ファームウェアをアップデートできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "カスタムファームウェアを選択する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "ファームウェアアップデート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "ファームウェアアップデート中。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "ファームウェアアップデート完了。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "不特定なエラーの発生によりファームウェアアップデート失敗しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "コミュニケーションエラーによりファームウェアアップデート失敗しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "インプット/アウトプットエラーによりファームウェアアップデート失敗しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "ファームウェアが見つからず、ファームウェアアップデート失敗しました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "画像を変換する..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "“ベース”から各ピクセルへの最大距離。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高さ（mm）"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "ミリメートルでビルドプレートからベースの高さ。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "ベース（mm）"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "ビルドプレート上の幅ミリメートル。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "幅（mm）"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "ビルドプレート上の奥行きミリメートル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深さ（mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "リトフェインの場合、暗いピクセルは、より多くの光を通すために厚い場所に対応する必要があります。高さマップの場合、明るいピクセルは高い地形を表しているため、明るいピクセルは生成された3D モデルの厚い位置に対応する必要があります。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "暗いほうを高く"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "薄いほうを高く"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "リトフェインの場合、半透明性を示す単純な対数モデルを利用できます。高さマップの場合、ピクセル値は高さに比例します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "線形"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明性"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "厚さ1ミリメートルのプリントを貫通する光の割合。この値を小さくすると、画像の暗い領域ではコントラストが増し、明るい領域ではコントラストが減少します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm透過率（%）"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "画像に適応したスムージング量。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "スムージング"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "プリンター"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "ノズル設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "ノズルサイズ"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "適合する材料直径"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "ノズルオフセットX"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "ノズルオフセットY"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷却ファンの番号"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "エクストルーダーがG-Codeを開始する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "エクストルーダーがG-Codeを終了する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "プリンターの設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X（幅）"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (奥行き)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高さ)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "ビルドプレート形"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "センターを出します"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "ヒーテッドドベッド"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "加熱式ビルドボリューム"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "マーケットプレース"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-codeフレーバー"
+msgid "You need to accept the license to install the package"
+msgstr "パッケージをインストールするにはライセンスに同意する必要があります"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "プリントヘッド設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "アカウントにおける変更"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X分"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "無視"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y分"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "次"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "X max"
-msgstr "最大X"
+msgid "The following packages will be added:"
+msgstr "次のパッケージが追加されます:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Y max"
-msgstr "最大Y"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "次のパッケージは、Curaバージョンに互換性がないため、インストールできません:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "ガントリーの高さ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "アンインストール確認"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "エクストルーダーの数"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "使用中の材料またはプロファイルをアンインストールしようとしています。確定すると以下の材料/プロファイルをデフォルトにリセットします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Codeの開始"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-codeの終了"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "プロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"プリンタが接続されているか確認し、以下を行います。\n"
-"- プリンタの電源が入っているか確認します。\n"
-"- プリンタがネットワークに接続されているかどうかを確認します。- クラウドに接続されたプリンタを検出するためにサインインしているかどうかを確認します。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "確認"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "プリンターをネットワークに接続してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "ユーザーマニュアルをオンラインで見る"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "メッシュタイプ"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "標準モデル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "サポートとしてプリント"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "オーバーラップの設定を変更"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Curaパッケージデータベースに接続できません。接続を確認してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "オーバーラップをサポートしない"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "インフィルメッシュのみ"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "メッシュ切断"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "設定を選択する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "このモデルをカスタマイズする設定を選択する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "フィルター..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "すべて表示する"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "プラグイン処理後"
+msgid "Community Contributions"
+msgstr "地域貢献"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "スクリプトの処理後"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "スクリプトを加える"
+msgid "Community Plugins"
+msgstr "コミュニティプラグイン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
 msgctxt "@label"
-msgid "Settings"
-msgstr "設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "処理したアクティブなスクリプトを変更します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "次のスクリプトがアクティブです:"
+msgid "Generic Materials"
+msgstr "汎用材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "カラースキーム"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "フィラメントの色"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "ラインタイプ"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "スピード"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "レイヤーの厚さ"
+msgid "Version"
+msgstr "バージョン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "コンパティビリティモード"
+msgid "Last updated"
+msgstr "最終更新日"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "移動"
+msgid "Brand"
+msgstr "ブランド"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
-msgid "Helpers"
-msgstr "ヘルプ"
+msgid "Downloads"
+msgstr "ダウンロード"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "外郭"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
+msgstr "インストールされたプラグイン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "インフィル"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "プラグインはインストールされていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "トップのレイヤーを表示する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "インストールされた材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "トップの5レイヤーの詳細を表示する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "材料はインストールされていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "トップ/ボトム"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "バンドルされたプラグイン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "インナーウォール"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "バンドルされた材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "min"
-msgstr "最小"
+msgid "Website"
+msgstr "ウェブサイト"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "max"
-msgstr "最大"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "匿名データの収集に関する詳細"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために匿名データを収集します。以下は、共有されるすべてのデータの例です："
+msgid "Email"
+msgstr "電子メール"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "匿名データは送信しない"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "検証済みのUltimaker Cura Enterprise用プラグインおよび材料を入手するにはサインインしてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "匿名データの送信を許可する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "サインイン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "戻る"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "パッケージ取得中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
 msgid "Compatibility"
 msgstr "互換性"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
 msgctxt "@label:table_header"
 msgid "Machine"
 msgstr "プリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
 msgctxt "@label:table_header"
 msgid "Build Plate"
 msgstr "ビルドプレート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
 msgctxt "@label:table_header"
 msgid "Support"
 msgstr "サポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
 msgctxt "@label:table_header"
 msgid "Quality"
 msgstr "品質"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
 msgid "Technical Data Sheet"
 msgstr "技術データシート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
 msgctxt "@action:label"
 msgid "Safety Data Sheet"
 msgstr "安全データシート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
 msgctxt "@action:label"
 msgid "Printing Guidelines"
 msgstr "印刷ガイドライン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
 msgctxt "@action:label"
 msgid "Website"
 msgstr "ウェブサイト"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "プラグイン"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "マテリアル"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
 msgid "Installed"
 msgstr "インストールした"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "インストールまたはアップデートには<a href='%1'>ログイン</a>が必要です"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "ウェブマーケットプレイスに移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>材料スプールの購入</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "再起動時にインストール"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "アップデート"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "更新中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "更新済み"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "アップデートには<a href='%1'>ログイン</a>が必要です"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "ダウングレード"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "アンインストール"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "インストールした"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "インストールまたはアップデートには<a href='%1'>ログイン</a>が必要です"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>材料スプールの購入</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
 msgid "Premium"
 msgstr "プレミアム"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "ウェブマーケットプレイスに移動"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
 msgctxt "@label"
 msgid "Search materials"
 msgstr "材料を検索"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
 msgid "You will need to restart Cura before changes in packages have effect."
 msgstr "パッケージへの変更を有効にするためにCuraを再起動する必要があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr "%1を終了する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "プラグイン"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "マテリアル"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "インストールした"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "再起動時にインストール"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "アップデートには<a href='%1'>ログイン</a>が必要です"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "ダウングレード"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "アンインストール"
+msgid "Back"
+msgstr "戻る"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
 msgctxt "@action:button"
 msgid "Install"
 msgstr "インストール"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "アカウントにおける変更"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "メッシュタイプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "無視"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+msgctxt "@label"
+msgid "Normal model"
+msgstr "標準モデル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "次"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+msgctxt "@label"
+msgid "Print as support"
+msgstr "サポートとしてプリント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "次のパッケージが追加されます:"
+msgid "Modify settings for overlaps"
+msgstr "オーバーラップの設定を変更"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "次のパッケージは、Curaバージョンに互換性がないため、インストールできません:"
+msgid "Don't support overlaps"
+msgstr "オーバーラップをサポートしない"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "アンインストール確認"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "インフィルメッシュのみ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "使用中の材料またはプロファイルをアンインストールしようとしています。確定すると以下の材料/プロファイルをデフォルトにリセットします。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "メッシュ切断"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "材料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "設定を選択する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "このモデルをカスタマイズする設定を選択する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "確認"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "フィルター..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "パッケージをインストールするにはライセンスに同意する必要があります"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "すべて表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
-msgstr "ウェブサイト"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "プラグイン処理後"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Email"
-msgstr "電子メール"
+msgid "Post Processing Scripts"
+msgstr "スクリプトの処理後"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
-msgstr "バージョン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "スクリプトを加える"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "Last updated"
-msgstr "最終更新日"
+msgid "Settings"
+msgstr "設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "ブランド"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "処理したアクティブなスクリプトを変更します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "ダウンロード"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "次のスクリプトがアクティブです:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "地域貢献"
+msgid "Queued"
+msgstr "順番を待つ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
-msgstr "コミュニティプラグイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "ブラウザで管理する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "汎用材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Curaパッケージデータベースに接続できません。接続を確認してください。"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "キューに印刷ジョブがありません。追加するには、スライスしてジョブを送信します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "インストールされたプラグイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "プリントジョブ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "プラグインはインストールされていません。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
+msgstr "合計印刷時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "インストールされた材料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "待ち時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "材料はインストールされていません。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "構成の変更"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "バンドルされたプラグイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "上書き"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "バンドルされた材料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "割り当てられたプリンター %1 には以下の構成変更が必要です:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "パッケージ取得中..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "プリンター %1 が割り当てられましたが、ジョブには不明な材料構成があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "検証済みのUltimaker Cura Enterprise用プラグインおよび材料を入手するにはサインインしてください。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "材料 %1 を %2 から %3 に変更します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "%3 を 材料 %1 にロードします（これは上書きできません）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "ビルドプレートのレベリング"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "プリントコア %1 を %2 から %3 に変更します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "プリントの成功率を上げるために、ビルドプレートを今調整できます。’次のポジションに移動’をクリックすると。"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "ビルドプレートを %1 に変更します（これは上書きできません）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "すべてのポジションに。"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "上書きは、既存のプリンタ構成で指定された設定を使用します。これにより、印刷が失敗する場合があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "ビルドプレートのレベリングを開始する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
+msgstr "ガラス"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "次のポジションに移動"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "アルミニウム"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "このUltimaker Originalに施されたアップグレートを選択する"
+msgid "Unavailable printer"
+msgstr "利用できないプリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "ヒーティッドビルドプレート（オフィシャルキットまたはセルフビルド）"
+msgid "First available"
+msgstr "次の空き"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "キューをリモートで管理するには、プリンターのファームウェアを更新してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "ネットワーク上で繋がったプリンターに接続"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "印刷ジョブをネットワークを介してプリンターに直接送信するには、ネットワークケーブルを使用してプリンターを確実にネットワークに接続するか、プリンターを WIFI ネットワークに接続します。Cura をプリンタに接続していない場合でも、USB ドライブを使用して g コードファイルをプリンターに転送することはできます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "以下のリストからプリンタを選択します:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "編集"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "取り除く"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "お持ちのプリンターがリストにない場合、<a href='%1'>ネットワーク・プリンティング・トラブルシューティング・ガイド</a>を読んでください"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "タイプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "ファームウェアバージョン"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "アドレス"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "このプリンターは、プリンターのグループをホストするために設定されていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "このプリンターは %1 プリンターのループのホストプリンターです。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "このアドレスのプリンターは応答していません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "接続"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "無効なIPアドレス"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "有効なIPアドレスを入力してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "プリンターアドレス"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "ネットワーク内のプリンターのIPアドレスを入力してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "構成の変更"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "上書き"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "割り当てられたプリンター %1 には以下の構成変更が必要です:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "プリンター %1 が割り当てられましたが、ジョブには不明な材料構成があります。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "材料 %1 を %2 から %3 に変更します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "%3 を 材料 %1 にロードします（これは上書きできません）。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "プリントコア %1 を %2 から %3 に変更します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "ビルドプレートを %1 に変更します（これは上書きできません）。"
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "上書きは、既存のプリンタ構成で指定された設定を使用します。これにより、印刷が失敗する場合があります。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "ネットワーク上のプリント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "ガラス"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "プリント"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "アルミニウム"
+msgid "Printer selection"
+msgstr "プリンターの選択"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "最上位に移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "削除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "再開"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "一時停止しています..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "再開しています..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "一時停止"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "中止しています..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中止"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1 をキューの最上位に移動しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "印刷ジョブを最上位に移動する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1 を削除しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "印刷ジョブの削除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1 を中止してよろしいですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "プリント中止"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "中止しました"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "終了"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "準備中..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "中止しています..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "一時停止しています..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "一時停止"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "再開しています..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "アクションが必要です"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%1 を %2 に終了します"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "プリンター管理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "キューをリモートで管理するには、プリンターのファームウェアを更新してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "読み込み中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "利用不可"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "到達不能"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "アイドル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "プリント中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "無題"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "構成の変更が必要です"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "詳細"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "利用できないプリンター"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "このUltimaker Originalに施されたアップグレートを選択する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "次の空き"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "ヒーティッドビルドプレート（オフィシャルキットまたはセルフビルド）"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "中止しました"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "ビルドプレートのレベリング"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "終了"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "プリントの成功率を上げるために、ビルドプレートを今調整できます。’次のポジションに移動’をクリックすると。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "準備中..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "すべてのポジションに。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "中止しています..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "ビルドプレートのレベリングを開始する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "一時停止しています..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "次のポジションに移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "一時停止"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "プロジェクトを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "再開しています..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "既存を更新する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "アクションが必要です"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新しいものを作成する"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%1 を %2 に終了します"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "サマリーCuraプロジェクト"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "プリンターの設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "このプリンターの問題をどのように解決すればいいか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "タイプ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "プリンターグループ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "プロファイル設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "このプロファイルの問題をどのように解決すればいいか？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "ネーム"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "プロファイル内にない"
+
+# Can’t edit the Japanese text
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1個の設定を上書き"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "次から引き出す"
+
+# can’t inset the japanese text
+# %1: print quality profile name
+# %2: number of overridden ssettings
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%2の%1個の設定を上書き"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "フィラメント設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "このフィラメントの問題をどのように解決すればいいか？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "視野設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "モード"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "ビジブル設定:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%2のうち%1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "プロジェクトを読み込むとビルドプレート上のすべてのモデルがクリアされます。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "開く"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "このプリントの何かが問題です。クリックして調整のヒントをご覧ください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"プリンタが接続されているか確認し、以下を行います。\n"
+"- プリンタの電源が入っているか確認します。\n"
+"- プリンタがネットワークに接続されているかどうかを確認します。- クラウドに接続されたプリンタを検出するためにサインインしているかどうかを確認します。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "プリンターをネットワークに接続してください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "ユーザーマニュアルをオンラインで見る"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "匿名データの収集に関する詳細"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために匿名データを収集します。以下は、共有されるすべてのデータの例です："
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "匿名データは送信しない"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "匿名データの送信を許可する"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "順番を待つ"
+msgid "Color scheme"
+msgstr "カラースキーム"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "ブラウザで管理する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "フィラメントの色"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "ラインタイプ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "スピード"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "キューに印刷ジョブがありません。追加するには、スライスしてジョブを送信します。"
+msgid "Compatibility Mode"
+msgstr "コンパティビリティモード"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "プリントジョブ"
+msgid "Travels"
+msgstr "移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "合計印刷時間"
+msgid "Helpers"
+msgstr "ヘルプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "待ち時間"
+msgid "Shell"
+msgstr "外郭"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "ネットワーク上のプリント"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "インフィル"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "プリント"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "プリンターの選択"
+msgid "Only Show Top Layers"
+msgstr "トップのレイヤーを表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "サインイン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "トップの5レイヤーの詳細を表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "3Dプリンティング活用の鍵"
+msgid "Top / Bottom"
+msgstr "トップ/ボトム"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- より多くのプリントプロファイルとプラグインを使用して作業をカスタマイズする\n"
-"- 設定を同期させ、どこにでも読み込めるようにすることで柔軟性を保つ\n"
-"- Ultimakerプリンターのリモートワークフローを活用して効率を高める"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "インナーウォール"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "アカウントを作成する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "最小"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "確認しています..."
+msgid "max"
+msgstr "最大"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "ノズル設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "アカウント同期"
+msgid "Nozzle size"
+msgstr "ノズルサイズ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "問題が発生しました..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "保留中の更新をインストール"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "適合する材料直径"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "アカウントの更新を確認"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "ノズルオフセットX"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "最終更新：%1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "ノズルオフセットY"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimakerアカウント"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "冷却ファンの番号"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "サインアウト"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "エクストルーダーがG-Codeを開始する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "エクストルーダーがG-Codeを終了する"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "プリンター"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "プリンターの設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "時間予測がありません"
+msgid "X (Width)"
+msgstr "X（幅）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "コスト予測がありません"
+msgid "Y (Depth)"
+msgstr "Y (奥行き)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "プレビュー"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (高さ)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "時間予測"
+msgid "Build plate shape"
+msgstr "ビルドプレート形"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "材料予測"
+msgid "Origin at center"
+msgstr "センターを出します"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "ヒーテッドドベッド"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "加熱式ビルドボリューム"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "スライス中..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-codeフレーバー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "スライスできません"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "プリントヘッド設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X分"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y分"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "最大X"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "最大Y"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "ガントリーの高さ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "エクストルーダーの数"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Codeの開始"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-codeの終了"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "画像を変換する..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "“ベース”から各ピクセルへの最大距離。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高さ（mm）"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "ミリメートルでビルドプレートからベースの高さ。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "ベース（mm）"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "ビルドプレート上の幅ミリメートル。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "幅（mm）"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "ビルドプレート上の奥行きミリメートル"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深さ（mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "リトフェインの場合、暗いピクセルは、より多くの光を通すために厚い場所に対応する必要があります。高さマップの場合、明るいピクセルは高い地形を表しているため、明るいピクセルは生成された3D モデルの厚い位置に対応する必要があります。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "暗いほうを高く"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "薄いほうを高く"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "リトフェインの場合、半透明性を示す単純な対数モデルを利用できます。高さマップの場合、ピクセル値は高さに比例します。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "線形"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明性"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "厚さ1ミリメートルのプリントを貫通する光の割合。この値を小さくすると、画像の暗い領域ではコントラストが増し、明るい領域ではコントラストが減少します。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm透過率（%）"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "画像に適応したスムージング量。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "スムージング"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "マイ バックアップ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "現在バックアップは存在しません。[今すぐバックアップする] を使用して作成してください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "プレビューではバックアップは5つまでに制限されています。古いバックアップは削除してください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura のバックアップおよび同期を設定します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "処理"
+msgid "Want more?"
+msgstr "詳しく知りたい？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "スライス"
+msgid "Backup Now"
+msgstr "今すぐバックアップする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "スライス処理の開始"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自動バックアップ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura を起動した日は常にバックアップを自動生成します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura バージョン"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "プリンタ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "プロファイル"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "プラグイン"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "キャンセル"
+msgid "Restore"
+msgstr "リストア"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "オンラインでトラブルシューティングガイドを表示する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "バックアップの削除"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "留め金 フルスクリーン"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "このバックアップを削除しますか？これは取り消しできません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "全画面表示を終了する"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "バックアップのリストア"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&取り消す"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "バックアップをリストアする前に Cura を再起動する必要があります。今すぐ Cura を閉じますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&やりなおす"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura バックアップ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "お気に入り"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "汎用"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&ファイル"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "プロジェクトを保存... (&S)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "エクスポート... (&E)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&やめる"
+msgid "Export Selection..."
+msgstr "選択エクスポート..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3Dビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "最近開いたファイルを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "構成の選択"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "構成"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "構成"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "カスタム"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "プリンター"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "有効"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "フィラメント"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "この材料の組み合わせの接着に接着材を使用する。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1 が認識されていないためこの構成は利用できません。%2 から適切な材料プロファイルをダウンロードしてください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "マーケットプレース"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "プリンタから利用可能な構成を読み込んでいます..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "プリンタが接続されていないため、構成は利用できません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&ビュー"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "フロントビュー"
+msgid "&Camera position"
+msgstr "カメラ位置 (&C)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "トップビュー"
+msgid "Camera view"
+msgstr "カメラビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "左サイドビュー"
+msgid "Perspective"
+msgstr "パースペクティブ表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "右サイドビュー"
+msgid "Orthographic"
+msgstr "平行投影表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Curaを構成する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "ビルドプレート (&B)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "＆プリンターを追加する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "ネットワーク対応プリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "プリンターを管理する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "ローカルプリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "フィラメントを管理する..."
+msgid "Visible Settings"
+msgstr "ビジブル設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "マーケットプレイスから材料を追加"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&現在の設定/無効にプロファイルをアップデートする"
+msgid "Collapse All Categories"
+msgstr "すべてのカテゴリを折りたたむ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&変更を破棄する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "視野のセッティングを管理する..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&今の設定/無効からプロファイルを作成する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "プロファイルを管理する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&プリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "オンラインドキュメントを表示する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&フィラメント"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "報告＆バグ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "アクティブエクストルーダーとしてセットする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "新情報"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "エクストルーダーを有効にする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "アバウト..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "エクストルーダーを無効にする"
 
-# can’t enter japanese text
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "&選択したモデルを削除"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-# can’t enter japanese text
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "選択したモデルを中央に移動"
+# can’t enter japanese texts
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "選択したモデルで印刷:"
 
-# can’t edit japanese text
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+# can’t eneter japanese texts
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "選択した複数のモデル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "モデルを消去する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "コピーの数"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "プラットホームの中心にモデルを配置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&モデルグループ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "カスタムプロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "モデルを非グループ化"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "今の変更を破棄する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "モ&デルの合体"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "プロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&モデルを増倍する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"いくらかの設定プロファイルにある値とことなる場合無効にします。\n"
+"プロファイルマネージャーをクリックして開いてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "すべてのモデル選択"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "オン"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "ビルドプレート上のクリア"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "オフ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "すべてのモデルを読み込む"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "実験"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "すべてのモデルをすべてのビルドプレートに配置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推奨"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "すべてのモデルをアレンジする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "カスタム"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "選択をアレンジする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "プリント設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "すべてのモデルのポジションをリセットする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "印刷設定は無効にされました。G-code ファイルは変更できません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "すべてのモデル＆変更点をリセットする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "インフィル半減"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&ファイルを開く(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "グラデュアルインフィルはトップに向かうに従ってインフィルの量を増やします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&新しいプロジェクト..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "プロファイル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "コンフィグレーションのフォルダーを表示する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "プロファイルの設定がいくつか変更されました。変更を有効にするにはカスタムモードに移動してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "視野のセッティングを構成する..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "サポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&マーケットプレース"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "オーバーハングがあるモデルにサポートを生成します。このサポート構造なしでは、プリント中にオーバーハングのパーツが崩壊してしまいます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "このパッケージは再起動後にインストールされます。"
+msgid "Adhesion"
+msgstr "密着性"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "一般"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "ブリムまたはラフトのプリントの有効化。それぞれ、プリントの周り、また造形物の下に底面を加え切り取りやすくします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "エクストルーダー%2の設定には%1プロファイルがありません。代わりにデフォルトの目的が使用されます"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "プリンター"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "プロファイル"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "プリントをアクティベートする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1を閉じています"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "ジョブネーム"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1を終了しますか？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "プリント時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "残り時間"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "ファイルを開く"
+msgid "Discard or Keep changes"
+msgstr "変更を取り消すか保存するか"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "パッケージをインストール"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"一部のプロファイル設定がカスタマイズされています。\n"
+"これらの変更された設定をプロファイルの切り替え後も維持しますか？\n"
+"変更を破棄して'%1'からデフォルトの設定を読み込むこともできます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "ファイルを開く(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "プロファイル設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "選択したファイルの中に複数のG-codeが存在します。1つのG-codeのみ一度に開けます。G-codeファイルを開く場合は、1点のみ選んでください。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "現在の変更"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "プリンターを追加する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "毎回確認する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新情報"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "取り消し、再度確認しない"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "キープし、再度確認しない"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "変更を破棄"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "変更を維持"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1について"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "バージョン: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熱溶解積層型3Dプリンティングのエンドtoエンドソリューション。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
 "Cura proudly uses the following open source projects:"
 msgstr "CuraはUltimakerB.Vのコミュニティの協力によって開発され、Curaはオープンソースで使えることを誇りに思います:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "グラフィックユーザーインターフェイス"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "アプリケーションフレームワーク"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-codeの生成"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "インタープロセスコミュニケーションライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "プログラミング用語"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUIフレームワーク"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUIフレームワークバインディング"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ バインディングライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "データインターフェイスフォーマット"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "サイエンスコンピューティングを操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "ファターマスを操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STLファイルを操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "平面対象物を操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "参画メッシュを操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MFファイルを操作するためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "ファイルメタデータとストリーミングのためのライブラリーサポート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "シリアルコミュニケーションライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConfディスカバリーライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "ポリゴンクリッピングライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python用の静的型チェッカー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSLの信頼性を検証するためのルート証明書"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Pythonエラー追跡ライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research開発のポリゴンパッキングライブラリー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2dのPythonバインディング"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "フォント"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVGアイコン"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 分散アプリケーションの開発"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "プロジェクトを開く"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "これはCuraのプロジェクトファイルです。プロジェクトとしてあけますか、それともモデルのみ取り込みますか？"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "選択を記憶させる"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "プロジェクトを開く"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "モデルを取り込む"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "変更を取り消すか保存するか"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "一部のプロファイル設定がカスタマイズされています。\nこれらの変更された設定をプロファイルの切り替え後も維持しますか？\n変更を破棄して'%1'からデフォルトの設定を読み込むこともできます。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "プロファイル設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "現在の変更"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "毎回確認する"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "取り消し、再度確認しない"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "キープし、再度確認しない"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "変更を破棄"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "変更を維持"
+msgid "Open file(s)"
+msgstr "ファイルを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "選択したファイルの中に複数のプロジェクトが存在します。1ファイルのみ一度に開けます。ファイルからモデルを先に取り込むことをお勧めします。続けますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "すべてをモデルとして取り入れる"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "プロジェクトを保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "エクストルーダー%1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1とフィラメント"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "保存中のプロジェクトサマリーを非表示にする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "保存"
 
-# can’t enter japanese
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "選択したモデルを%1で印刷する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "プロジェクトを開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "これはCuraのプロジェクトファイルです。プロジェクトとしてあけますか、それともモデルのみ取り込みますか？"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "選択を記憶させる"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "プロジェクトを開く"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "モデルを取り込む"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "無題"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&ファイル"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura にようこそ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&編集"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&ビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "はじめに"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空にする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "拡張子"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura の改善にご協力ください"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "プレファレンス"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために以下の匿名データを収集します:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "ヘルプ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "プリンターのタイプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新しいプロジェクト"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "材料の利用状況"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "新しいプロジェクトを開始しますか？この作業では保存していない設定やビルドプレートをクリアします。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "スライスの数"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "プリント設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "構成"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura が収集したデータには個人データは含まれません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "詳細"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1 が認識されていないためこの構成は利用できません。%2 から適切な材料プロファイルをダウンロードしてください。"
+msgid "Add printer by IP address"
+msgstr "IP アドレスでプリンターを追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "プリンターのIPアドレスを入力します。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "追加"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "マーケットプレース"
+msgid "Could not connect to device."
+msgstr "デバイスに接続できません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "プリンタから利用可能な構成を読み込んでいます..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimakerプリンターに接続できませんか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "プリンタが接続されていないため、構成は利用できません。"
+msgid "The printer at this address has not responded yet."
+msgstr "このアドレスのプリンターは応答していません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "構成の選択"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "このプリンタは不明なプリンタであるか、またはグループのホストではないため、追加できません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "戻る"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "接続"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "構成"
+msgid "Add a printer"
+msgstr "プリンターの追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "カスタム"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "ネットワークプリンターの追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "プリンター"
+msgid "Add a non-networked printer"
+msgstr "非ネットワークプリンターの追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "有効"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "フィラメント"
+msgid "Add a Cloud printer"
+msgstr "クラウドプリンターを追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "この材料の組み合わせの接着に接着材を使用する。"
+msgid "Waiting for Cloud response"
+msgstr "クラウドの応答を待機しています"
 
-# can’t enter japanese texts
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "選択したモデルで印刷:"
+msgid "No printers found in your account?"
+msgstr "アカウントにプリンターが見つかりませんか？"
 
-# can’t eneter japanese texts
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "選択した複数のモデル"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "アカウントの以下のプリンターがCuraに追加されました。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "プリンタを手動で追加する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "コピーの数"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "プロジェクトを保存... (&S)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "エクスポート... (&E)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "選択エクスポート..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "材料"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "お気に入り"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "スキップ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "汎用"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "ユーザー用使用許諾契約"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "ネットワーク対応プリンター"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒否して閉じる"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "ローカルプリンター"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "最近開いたファイルを開く"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "ネットワークにプリンターはありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&プリンター"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&フィラメント"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP でプリンターを追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "アクティブエクストルーダーとしてセットする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "クラウドプリンターを追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "エクストルーダーを有効にする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "トラブルシューティング"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "エクストルーダーを無効にする"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "製造元"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "プロファイル作成者"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "プリンター名"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "プリンターに名前を付けてください"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "最終更新：%1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimakerアカウント"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "サインアウト"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "サインイン"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "確認しています..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "アカウント同期"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "問題が発生しました..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "保留中の更新をインストール"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "アカウントの更新を確認"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "オブジェクトリスト"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "ビジブル設定"
+msgid "Show Online Troubleshooting Guide"
+msgstr "オンラインでトラブルシューティングガイドを表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "すべてのカテゴリを折りたたむ"
+msgid "Toggle Full Screen"
+msgstr "留め金 フルスクリーン"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "視野のセッティングを管理する..."
+msgid "Exit Full Screen"
+msgstr "全画面表示を終了する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&取り消す"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&やりなおす"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&やめる"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "カメラ位置 (&C)"
+msgid "3D View"
+msgstr "3Dビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "カメラビュー"
+msgid "Front View"
+msgstr "フロントビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "パースペクティブ表示"
+msgid "Top View"
+msgstr "トップビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "平行投影表示"
+msgid "Left Side View"
+msgstr "左サイドビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "ビルドプレート (&B)"
+msgid "Right Side View"
+msgstr "右サイドビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "プリンターにつながっていません"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Curaを構成する..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "今プリンタはコマンドを処理できません"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "＆プリンターを追加する..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "メンテナンス。プリンターをチェックしてください"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "プリンターを管理する..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "プリンターへの接続が切断されました"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "フィラメントを管理する..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "プリント中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "マーケットプレイスから材料を追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "一時停止しました"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&現在の設定/無効にプロファイルをアップデートする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "準備中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&変更を破棄する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "造形物を取り出してください"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&今の設定/無効からプロファイルを作成する..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "プロファイルを管理する..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "オンラインドキュメントを表示する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "報告＆バグ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "新情報"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "アバウト..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "モデルを消去する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "プラットホームの中心にモデルを配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&モデルグループ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "モデルを非グループ化"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "モ&デルの合体"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&モデルを増倍する..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "すべてのモデル選択"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "ビルドプレート上のクリア"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "すべてのモデルを読み込む"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "すべてのモデルをすべてのビルドプレートに配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "すべてのモデルをアレンジする"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "選択をアレンジする"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "すべてのモデルのポジションをリセットする"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "すべてのモデル＆変更点をリセットする"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&ファイルを開く(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&新しいプロジェクト..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "コンフィグレーションのフォルダーを表示する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "視野のセッティングを構成する..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&マーケットプレース"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "計算された"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "プロファイル"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "現在"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "ユニット"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "インフォメーション"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "直径変更の確認"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新しいフィラメントの直径は %1 mm に設定されています。これは現在のエクストルーダーに適応していません。続行しますか？"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "プリント中止"
+msgid "Display Name"
+msgstr "ディスプレイ名"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "本当にプリントを中止してもいいですか？"
+msgid "Material Type"
+msgstr "フィラメントタイプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "サポートとしてプリントされます。"
+msgid "Color"
+msgstr "色"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "このモデルに重なる他のモデルは修正されます。"
+msgid "Properties"
+msgstr "プロパティ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "このモデルとのインフィル交差は修正されます。"
+msgid "Density"
+msgstr "密度"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "このモデルとの重なりはサポートされません。"
+msgid "Diameter"
+msgstr "直径"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1個の設定を上書きします。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "フィラメントコスト"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "オブジェクトリスト"
+msgid "Filament weight"
+msgstr "フィラメントの重さ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "フィラメントの長さ"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "毎メーターコスト"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "このフィラメントは %1にリンクすプロパティーを共有する。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "フィラメントをリンクを外す"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "記述"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "接着のインフォメーション"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "アクティベート"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "作成する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "複製"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "取り込む"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "書き出す"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "プリンター"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "モデルを取り除きました"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "%1を取り外しますか？この作業はやり直しが効きません！"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "フィラメントを取り込む"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "<filename>%1</filename>フィラメントを取り込むことができない: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "フィラメント<filename>%1</filename>の取り込みに成功しました"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "フィラメントを書き出す"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "フィラメントの書き出しに失敗しました <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "フィラメントの<filename>%1</filename>への書き出しが完了ました"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "プリンター"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "名を変える"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "プロファイル"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "作成する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "複製"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "プロファイルを作る"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "このプロファイルの名前を指定してください。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "プロファイルを複製する"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "プロファイル名を変える"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "プロファイルを取り込む"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "プロファイルを書き出す"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "プリンター:%1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "プロファイルを現在のセッティング"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "このプロファイルはプリンターによりデフォルトを使用、従いこのプロファイルはセッティング/書き換えが以下のリストにありません。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "設定は選択したプロファイルにマッチしています。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "グローバル設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "視野設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全てを調べる"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "一般"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "インターフェイス"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "通貨:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "テーマ:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "それらの変更を有効にするためにはアプリケーションを再起動しなけらばなりません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "セッティングを変更すると自動にスライスします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自動的にスライスする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "ビューポイント機能"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "赤でサポートができないエリアをハイライトしてください。サポートがない場合、正確にプリントができない場合があります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "ディスプレイオーバーハング"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "モデルの欠けている部分または不要な表面部分を、警告マークを使用してハイライトします。ツールパスは意図したジオメトリの欠けている部分になることが多くあります。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "モデルエラーを表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "モデルの選択時にモデルがカメラの中心に見えるようにカメラを移動する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "アイテムを選択するとカメラが中心にきます"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Curaのデフォルトのズーム機能は変更できるべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "カメラのズーム方向を反転する。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "ズームはマウスの方向に動くべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "マウスに対するズームは、正射投影ではサポートされていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "マウスの方向にズームする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "交差を避けるためにプラットホーム上のモデルを移動するべきですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "モデルの距離が離れているように確認する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "プラットホーム上のモデルはブルドプレートに触れるように下げるべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自動的にモデルをビルドプレートに落とす"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "G-codeリーダーに注意メッセージを表示します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-codeリーダーに注意メッセージ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "レイヤーはコンパティビリティモードに強制されるべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "レイヤービューコンパティビリティモードを強制する。（再起動が必要）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Curaを終了した場所で開くようにしますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "開始時にウィンドウの位置を復元"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "どのような種類のカメラレンダリングを使用する必要がありますか?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "カメラレンダリング:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "パースペクティブ表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "平行投影表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "ファイルを開くまた保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "デスクトップまたは外部アプリケーションから開いたファイルをCuraの同じインスタンスで開く必要がありますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Curaの単一インスタンスを使用"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "モデルがビルドボリュームに対して大きすぎる場合はスケールされるべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "大きなモデルをスケールする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "ユニット値がミリメートルではなくメートルの場合、モデルが極端に小さく現れる場合があります。モデルはスケールアップされるべきですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "極端に小さなモデルをスケールアップする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "モデルはロード後に選択しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "ロード後にモデルを選択"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "プリンター名の敬称はプリントジョブの名前に自動的に加えられるべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "プリンターの敬称をジョブネームに加える"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "プロジェクトファイルを保存時にサマリーを表示するべきか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "プロジェクトを保存時にダイアログサマリーを表示する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "プロジェクトファイルを開く際のデフォルト機能"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "プロジェクトファイル開く際のデフォルト機能: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "毎回確認する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "常にプロジェクトとして開く"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "常にモデルを取り込む"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "プロファイル内を変更し異なるプロファイルにしました、どこの変更点を保持、破棄したいのダイアログが表示されます、また何度もダイアログが表示されないようにデフォルト機能を選ぶことができます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "プロファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "プロファイル交換時に設定値を変更するためのデフォルト処理： "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "常に変更した設定を廃棄する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "常に変更した設定を新しいプロファイルに送信する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "プライバシー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Curaのプログラム開始時にアップデートがあるかチェックしますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "スタート時にアップデートあるかどうかのチェック"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "プリンターの不明なデータをUltimakerにおくりますか？メモ、モデル、IPアドレス、個人的な情報は送信されたり保存されたりはしません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(不特定な) プリントインフォメーションを送信"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "詳細"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "アクティベート"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "名を変える"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "作成する"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "複製"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "取り込む"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "書き出す"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "プリンター"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "モデルを取り除きました"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "%1を取り外しますか？この作業はやり直しが効きません！"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "フィラメントを取り込む"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "<filename>%1</filename>フィラメントを取り込むことができない: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "タイプ表示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "フィラメント<filename>%1</filename>の取り込みに成功しました"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "プリンターにつながっていません"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "フィラメントを書き出す"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "今プリンタはコマンドを処理できません"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "フィラメントの書き出しに失敗しました <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "メンテナンス。プリンターをチェックしてください"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "フィラメントの<filename>%1</filename>への書き出しが完了ました"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "プリンターへの接続が切断されました"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "インフォメーション"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "プリント中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "直径変更の確認"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "一時停止しました"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新しいフィラメントの直径は %1 mm に設定されています。これは現在のエクストルーダーに適応していません。続行しますか？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "準備中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "ディスプレイ名"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "造形物を取り出してください"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "フィラメントタイプ"
+msgid "Abort Print"
+msgstr "プリント中止"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "色"
+msgid "Are you sure you want to abort the print?"
+msgstr "本当にプリントを中止してもいいですか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "プロパティ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "検索設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "すべてのエクストルーダーの値をコピーする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "直径"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "すべてのエクストルーダーに対して変更された値をコピーする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "フィラメントコスト"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "この設定を非表示にする"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "フィラメントの重さ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "この設定を表示しない"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "フィラメントの長さ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "常に見えるように設定する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "毎メーターコスト"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"いくらかの非表示設定は通常の計算された値と異なる値を使用します。\n"
+"表示されるようにクリックしてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "このフィラメントは %1にリンクすプロパティーを共有する。"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "影響を与えるすべての設定がオーバーライドされるため、この設定は使用されません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "フィラメントをリンクを外す"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影響"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "記述"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "次によって影響を受ける"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "接着のインフォメーション"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "この設定は常に全てのエクストルーダーに共有されています。ここですべてのエクストルーダーの数値を変更できます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "プリント設定"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "この設定はエクストルーダー固有の競合する値から取得します:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "作成する"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"この設定にプロファイルと異なった値があります。\n"
+"プロファイルの値を戻すためにクリックしてください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "複製"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "プロファイルを作る"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "このプロファイルの名前を指定してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "プロファイルを複製する"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "プロファイル名を変える"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "プロファイルを取り込む"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "プロファイルを書き出す"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "プリンター:%1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "プロファイルを現在のセッティング"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "今の変更を破棄する"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "このプロファイルはプリンターによりデフォルトを使用、従いこのプロファイルはセッティング/書き換えが以下のリストにありません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "設定は選択したプロファイルにマッチしています。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "グローバル設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "計算された"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "設定"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"このセッティングは通常計算されます、今は絶対値に固定されています。\n"
+"計算された値に変更するためにクリックを押してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "プロファイル"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3Dビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "現在"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "フロントビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "ユニット"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "トップビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "視野設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左ビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全てを調べる"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右ビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "エクストルーダー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "ホットエンドの目標温度。ホットエンドはこの温度に向けて上がったり下がったりします。これが0の場合、ホットエンドの加熱はオフになっています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "このホットエンドの現在の温度です。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "ホットエンドをプリヒートする温度です。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "キャンセル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "プレヒート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "プリント開始前にホットエンドを加熱します。加熱中もプリントの調整を行えます、またホットエンドが加熱するまでプリント開始を待つ必要もありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "エクストルーダーのマテリアルの色。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "エクストルーダー入ったフィラメント。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "ノズルが入ったエクストルーダー。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "ビルドプレート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "ヒーティッドベッドの目標温度。ベッドはこの温度に向けて上がったり下がったりします。これが0の場合、ベッドの加熱はオフになっています。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "現在のヒーティッドベッドの温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "ベッドのプリヒート温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "プリント開始前にベッドを加熱します。加熱中もプリントの調整を行えます、またべットが加熱するまでプリント開始を待つ必要もありません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "プリンターコントロール"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "ジョグの位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "ジョグの距離"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-codeの送信"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "カスタムG-codeコマンドを接続されているプリンターに送信します。「Enter」を押してコマンドを送信します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "このプリンターはつながっていません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "クラウドプリンターがオフラインです。プリンターの電源が入っている状態で、インターネットに接続されているかどうかを確認してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "このプリンターはお使いのアカウントにリンクされていません。Ultimaker Digital Factoryにアクセスして接続を確立してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "クラウド接続は現在利用できません。サインインしてクラウドプリンターに接続してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "クラウド接続は現在利用できません。インターネット接続を確認してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "プリンターの追加"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "プリンター管理"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "キャンセルしたプリンター"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "プリンターのプリセット"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "プリントをアクティベートする"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "ジョブネーム"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "プリント時間"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "残り時間"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "プロファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"いくらかの設定プロファイルにある値とことなる場合無効にします。\n"
-"プロファイルマネージャーをクリックして開いてください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "カスタムプロファイル"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "エクストルーダー%2の設定には%1プロファイルがありません。代わりにデフォルトの目的が使用されます"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "印刷設定は無効にされました。G-code ファイルは変更できません。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "推奨"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "カスタム"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "オン"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "オフ"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "実験"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "密着性"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "ブリムまたはラフトのプリントの有効化。それぞれ、プリントの周り、また造形物の下に底面を加え切り取りやすくします。"
+msgid "Is printed as support."
+msgstr "サポートとしてプリントされます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "インフィル半減"
+msgid "Other models overlapping with this model are modified."
+msgstr "このモデルに重なる他のモデルは修正されます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "グラデュアルインフィルはトップに向かうに従ってインフィルの量を増やします。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "プロファイルの設定がいくつか変更されました。変更を有効にするにはカスタムモードに移動してください。"
+msgid "Infill overlapping with this model is modified."
+msgstr "このモデルとのインフィル交差は修正されます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "サポート"
+msgid "Overlaps with this model are not supported."
+msgstr "このモデルとの重なりはサポートされません。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "オーバーハングがあるモデルにサポートを生成します。このサポート構造なしでは、プリント中にオーバーハングのパーツが崩壊してしまいます。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1個の設定を上書きします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"いくらかの非表示設定は通常の計算された値と異なる値を使用します。\n"
-"表示されるようにクリックしてください。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "マーケットプレース"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "影響を与えるすべての設定がオーバーライドされるため、この設定は使用されません。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&編集"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影響"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "拡張子"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "次によって影響を受ける"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "プレファレンス"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "この設定は常に全てのエクストルーダーに共有されています。ここですべてのエクストルーダーの数値を変更できます。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "ヘルプ"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "この設定はエクストルーダー固有の競合する値から取得します:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新しいプロジェクト"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"この設定にプロファイルと異なった値があります。\n"
-"プロファイルの値を戻すためにクリックしてください。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "新しいプロジェクトを開始しますか？この作業では保存していない設定やビルドプレートをクリアします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"このセッティングは通常計算されます、今は絶対値に固定されています。\n"
-"計算された値に変更するためにクリックを押してください。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "検索設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "すべてのエクストルーダーの値をコピーする"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "すべてのエクストルーダーに対して変更された値をコピーする"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "この設定を非表示にする"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "この設定を表示しない"
+msgid "This package will be installed after restarting."
+msgstr "このパッケージは再起動後にインストールされます。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "常に見えるように設定する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3Dビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1を閉じています"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "フロントビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1を終了しますか？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "トップビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "パッケージをインストール"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左ビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "ファイルを開く(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右ビュー"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "選択したファイルの中に複数のG-codeが存在します。1つのG-codeのみ一度に開けます。G-codeファイルを開く場合は、1点のみ選んでください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "タイプ表示"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "プリンターを追加する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "クラウドプリンターを追加"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新情報"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "クラウドの応答を待機しています"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "クラウドプリンターがオフラインです。プリンターの電源が入っている状態で、インターネットに接続されているかどうかを確認してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "アカウントにプリンターが見つかりませんか？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "このプリンターはお使いのアカウントにリンクされていません。Ultimaker Digital Factoryにアクセスして接続を確立してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "アカウントの以下のプリンターがCuraに追加されました。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "クラウド接続は現在利用できません。サインインしてクラウドプリンターに接続してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "プリンタを手動で追加する"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "クラウド接続は現在利用できません。インターネット接続を確認してください。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "終わる"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "製造元"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "プロファイル作成者"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "プリンター名"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "プリンターに名前を付けてください"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "プリンターの追加"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "ネットワークプリンターの追加"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "非ネットワークプリンターの追加"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "ネットワークにプリンターはありません。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "プリンター管理"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "更新"
+msgid "Connected printers"
+msgstr "キャンセルしたプリンター"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP でプリンターを追加"
+msgid "Preset printers"
+msgstr "プリンターのプリセット"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "クラウドプリンターを追加"
+# can’t enter japanese
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "選択したモデルを%1で印刷する"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "トラブルシューティング"
+msgid "Time estimation"
+msgstr "時間予測"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP アドレスでプリンターを追加"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "プリンターのIPアドレスを入力します。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "追加"
+msgid "Material estimation"
+msgstr "材料予測"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "デバイスに接続できません。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimakerプリンターに接続できませんか？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "このアドレスのプリンターは応答していません。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "スライス中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "このプリンタは不明なプリンタであるか、またはグループのホストではないため、追加できません。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "スライスできません"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "戻る"
+msgid "Processing"
+msgstr "処理"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "接続"
+msgid "Slice"
+msgstr "スライス"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimakerアカウント"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "3Dプリンティング活用の鍵"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- より多くの成果物プロファイルとプラグインを使用して作業をカスタマイズする"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- 設定を同期させ、どこにでも読み込めるようにすることで柔軟性を保つ"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Ultimakerプリンターのリモートワークフローを活用して効率を高める"
+msgid "Start the slicing process"
+msgstr "スライス処理の開始"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "スキップ"
+msgid "Cancel"
+msgstr "キャンセル"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura の改善にご協力ください"
+msgid "No time estimation available"
+msgstr "時間予測がありません"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura は、印刷品質とユーザーエクスペリエンスを向上させるために以下の匿名データを収集します:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "コスト予測がありません"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "プリンターのタイプ"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "プレビュー"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "材料の利用状況"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "取り外し可能なドライブホットプラギング及びサポートの書き出しの供給。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "スライスの数"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "取り外し可能なドライブアウトプットデバイスプラグイン"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "プリント設定"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Cura 3.5 から Cura 4.0 のコンフィグレーションアップグレート。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura が収集したデータには個人データは含まれません。"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "3.5 から 4.0 にバージョンアップグレート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "詳細"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "構成をCura 4.6.2からCura 4.7に更新します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "空にする"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2から4.7へのバージョン更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "ユーザー用使用許諾契約"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Cura 2.2 からCura 2.4のコンフィグレーションアップグレート。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒否して閉じる"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2 から2.4にバージョンアップグレート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura にようこそ"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Cura 4.2からCura 4.3の設定をアップグレードします。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"以下の手順で\n"
-"Ultimaker Cura を設定してください。数秒で完了します。"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2から4.3にバージョンをアップグレート"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "はじめに"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "構成をCura 4.6.0からCura 4.6.2に更新します。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura の新機能"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "4.6.0から4.6.2へのバージョン更新"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "プリント問題の可能性のあるモデルをプリント構成を確認し、解決案を提示してください。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Cura 3.0からCura 3.1のコンフィグレーションアップグレート。"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "モデルチェッカー"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0から3.1にバージョンアップグレート"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "３MFファイルを読むこむためのサポートを供給する。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Cura 4.0 から Cura 4.1 のコンフィグレーションアップグレート。"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MFリーダー"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "4.0 から 4.1 にバージョンアップグレート"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "３MFファイルを読むこむためのサポートを供給する。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Cura 2.6 からCura 2.7のコンフィグレーションアップグレート。"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MFリーダー"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6から2.7にバージョンアップグレート"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMFファイルの読込みをサポートしています。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Cura 2.5 からCura 2.6のコンフィグレーションアップグレート。"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMFリーダー"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5から2.6にバージョンアップグレート"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "構成をバックアップしてリストアします。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "コンフィギュレーションを Cura 4.1 から Cura 4.2 にアップグレートする。"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura バックアップ"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "4.0 から 4.1 にバージョンアップグレート"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngineスライシングバックエンドにリンクを供給する。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Cura 2.1 からCura 2.2のコンフィグレーションアップグレート。"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Curaエンジンバックエンド"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1 から2.2にバージョンアップグレート"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Curaプロファイルを取り込むためのサポートを供給する。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Cura 3.2からCura 3.3のコンフィグレーションアップグレート。"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Curaプロファイルリーダー"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2から3.3にバージョンアップグレート"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Curaプロファイルを書き出すためのサポートを供給する。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Cura 4.5からCura 4.6に設定をアップグレードします。"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Curaプロファイルライター"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "バージョン4.5から4.6へのアップグレード"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "ファームウェアアップデートをチェックする。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Cura 4.4からCura 4.5に設定をアップグレードします。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "ファームウェアアップデートチェッカー"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4から4.5にバージョンアップグレート"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "ファームウェアアップデートのためのマシン操作を提供します。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Cura 4.7からCura 4.8に設定をアップグレードします。"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "ファームウェアアップデーター"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "バージョン4.7から4.8へのアップグレード"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "圧縮ファイルからG-codeを読み取ります。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Cura 3.3からCura 3.4のコンフィグレーションアップグレート。"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "圧縮G-codeリーダー"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "3.3から3.4にバージョンアップグレート"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "圧縮ファイルにG-codeを書き込みます。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Cura 4.3からCura 4.4へのコンフィグレーションアップグレート。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "圧縮G-codeライター"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3から4.4にバージョンアップグレート"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "g-codeファイルからプロファイルを読み込むサポートを供給する。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Cura 3.4 から Cura 3.5 のコンフィグレーションアップグレート。"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-codeプロファイルリーダー"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4 から 3.5 にバージョンアップグレート"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-codeファイルの読み込み、表示を許可する。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Cura 2.7からCura 3.0のコンフィグレーションアップグレート。"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-codeリーダー"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7から3.0にバージョンアップグレート"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "ファイルにG-codeを書き込みます。"
+msgid "Provides support for reading AMF files."
+msgstr "AMFファイルの読込みをサポートしています。"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-codeライター"
+msgid "AMF Reader"
+msgstr "AMFリーダー"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2Dの画像ファイルからプリント可能なジオメトリーを生成を可能にする。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "g-codeファイルからプロファイルを読み込むサポートを供給する。"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "画像リーダー"
+msgid "G-code Profile Reader"
+msgstr "G-codeプロファイルリーダー"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "レガシーCura Versionsからプロファイルを取り込むためのサポートを供給する。"
+msgid "Provides a machine actions for updating firmware."
+msgstr "ファームウェアアップデートのためのマシン操作を提供します。"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "レガシーCuraプロファイルリーダー"
+msgid "Firmware Updater"
+msgstr "ファームウェアアップデーター"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "プリンターの設定を変更（印刷ボリューム、ノズルサイズ、その他）"
+msgid "Provides support for reading X3D files."
+msgstr "X3Dファイルを読むこむためのサポートを供給する。"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "プリンターの設定アクション"
+msgid "X3D Reader"
+msgstr "X3Dリーダー"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Curaでモニターステージを提供します。"
+msgid "Find, manage and install new Cura packages."
+msgstr "新しいCuraパッケージを検索、管理、インストールします。"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "モニターステージ"
+msgid "Toolbox"
+msgstr "ツールボックス"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5600,75 +5710,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "後処理"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Curaで準備ステージを提供します。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngineスライシングバックエンドにリンクを供給する。"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "ステージの準備"
+msgid "CuraEngine Backend"
+msgstr "Curaエンジンバックエンド"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Curaでプレビューステージを提供します。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-codeを承認し、プリンターに送信する。またプラグインはファームウェアをアップデートできます。"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "プレビューステージ"
+msgid "USB printing"
+msgstr "USBプリンティング"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "取り外し可能なドライブホットプラギング及びサポートの書き出しの供給。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "Curaプロファイルを書き出すためのサポートを供給する。"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "取り外し可能なドライブアウトプットデバイスプラグイン"
+msgid "Cura Profile Writer"
+msgstr "Curaプロファイルライター"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "クラッシュレポーターで使用できるように、特定のイベントをログに記録します"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimakerのネットワーク接属できるプリンターのネットワーク接続を管理します。"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "監視ロガー"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimakerネットワーク接続"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "シミュレーションビューを提供します。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimakerのプリンターのアクションを供給する（ベッドレベリングウィザード、アップグレードの選択、他）"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "シミュレーションビュー"
+msgid "Ultimaker machine actions"
+msgstr "Ultimkerプリンターのアクション"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "不特定なスライス情報を提出。プレファレンスの中で無効になる可能性もある。"
+msgid "Provides support for reading 3MF files."
+msgstr "３MFファイルを読むこむためのサポートを供給する。"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "スライスインフォメーション"
+msgid "3MF Reader"
+msgstr "3MFリーダー"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "ノーマルなソリットメッシュビューを供給する。"
+msgid "Writes g-code to a compressed archive."
+msgstr "圧縮ファイルにG-codeを書き込みます。"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "ソリッドビュー"
+msgid "Compressed G-code Writer"
+msgstr "圧縮G-codeライター"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "圧縮ファイルからG-codeを読み取ります。"
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "圧縮G-codeリーダー"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "プリント問題の可能性のあるモデルをプリント構成を確認し、解決案を提示してください。"
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "モデルチェッカー"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "ファームウェアアップデートをチェックする。"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "ファームウェアアップデートチェッカー"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "G-codeファイルの読み込み、表示を許可する。"
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-codeリーダー"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5680,16 +5830,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "サポート消去機能"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "新しいCuraパッケージを検索、管理、インストールします。"
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "ツールボックス"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5700,6 +5840,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimeshリーダー"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "クラッシュレポーターで使用できるように、特定のイベントをログに記録します"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "監視ロガー"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5710,265 +5860,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP リーダー"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimakerフォーマットパッケージへの書き込みをサポートします。"
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFPライター"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimakerのプリンターのアクションを供給する（ベッドレベリングウィザード、アップグレードの選択、他）"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "レガシーCura Versionsからプロファイルを取り込むためのサポートを供給する。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimkerプリンターのアクション"
+msgid "Legacy Cura Profile Reader"
+msgstr "レガシーCuraプロファイルリーダー"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimakerのネットワーク接属できるプリンターのネットワーク接続を管理します。"
+msgid "Provides a prepare stage in Cura."
+msgstr "Curaで準備ステージを提供します。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimakerネットワーク接続"
+msgid "Prepare Stage"
+msgstr "ステージの準備"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-codeを承認し、プリンターに送信する。またプラグインはファームウェアをアップデートできます。"
+msgid "Provides a monitor stage in Cura."
+msgstr "Curaでモニターステージを提供します。"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USBプリンティング"
+msgid "Monitor Stage"
+msgstr "モニターステージ"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Cura 2.1 からCura 2.2のコンフィグレーションアップグレート。"
+msgid "Provides the X-Ray view."
+msgstr "透視ビューイング。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1 から2.2にバージョンアップグレート"
+msgid "X-Ray View"
+msgstr "透視ビュー"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Cura 2.2 からCura 2.4のコンフィグレーションアップグレート。"
+msgid "Provides support for writing 3MF files."
+msgstr "３MFファイルを読むこむためのサポートを供給する。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2 から2.4にバージョンアップグレート"
+msgid "3MF Writer"
+msgstr "3MFリーダー"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Cura 2.5 からCura 2.6のコンフィグレーションアップグレート。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "不特定なスライス情報を提出。プレファレンスの中で無効になる可能性もある。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5から2.6にバージョンアップグレート"
+msgid "Slice info"
+msgstr "スライスインフォメーション"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Cura 2.6 からCura 2.7のコンフィグレーションアップグレート。"
+msgid "Provides a preview stage in Cura."
+msgstr "Curaでプレビューステージを提供します。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6から2.7にバージョンアップグレート"
+msgid "Preview Stage"
+msgstr "プレビューステージ"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Cura 2.7からCura 3.0のコンフィグレーションアップグレート。"
+msgid "Provides the Simulation view."
+msgstr "シミュレーションビューを提供します。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7から3.0にバージョンアップグレート"
+msgid "Simulation View"
+msgstr "シミュレーションビュー"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Cura 3.0からCura 3.1のコンフィグレーションアップグレート。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "プリンターの設定を変更（印刷ボリューム、ノズルサイズ、その他）"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0から3.1にバージョンアップグレート"
+msgid "Machine Settings Action"
+msgstr "プリンターの設定アクション"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Cura 3.2からCura 3.3のコンフィグレーションアップグレート。"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XMLベースフィラメントのプロファイルを読み書きするための機能を供給する。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2から3.3にバージョンアップグレート"
+msgid "Material Profiles"
+msgstr "フィラメントプロファイル"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Cura 3.3からCura 3.4のコンフィグレーションアップグレート。"
+msgid "Provides a normal solid mesh view."
+msgstr "ノーマルなソリットメッシュビューを供給する。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "3.3から3.4にバージョンアップグレート"
+msgid "Solid View"
+msgstr "ソリッドビュー"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Cura 3.4 から Cura 3.5 のコンフィグレーションアップグレート。"
+msgid "Provides support for importing Cura profiles."
+msgstr "Curaプロファイルを取り込むためのサポートを供給する。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4 から 3.5 にバージョンアップグレート"
+msgid "Cura Profile Reader"
+msgstr "Curaプロファイルリーダー"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Cura 3.5 から Cura 4.0 のコンフィグレーションアップグレート。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimakerフォーマットパッケージへの書き込みをサポートします。"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "3.5 から 4.0 にバージョンアップグレート"
+msgid "UFP Writer"
+msgstr "UFPライター"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Cura 4.0 から Cura 4.1 のコンフィグレーションアップグレート。"
+msgid "Writes g-code to a file."
+msgstr "ファイルにG-codeを書き込みます。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "4.0 から 4.1 にバージョンアップグレート"
+msgid "G-code Writer"
+msgstr "G-codeライター"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "コンフィギュレーションを Cura 4.1 から Cura 4.2 にアップグレートする。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2Dの画像ファイルからプリント可能なジオメトリーを生成を可能にする。"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "4.0 から 4.1 にバージョンアップグレート"
+msgid "Image Reader"
+msgstr "画像リーダー"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Cura 4.2からCura 4.3の設定をアップグレードします。"
+msgid "Backup and restore your configuration."
+msgstr "構成をバックアップしてリストアします。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2から4.3にバージョンをアップグレート"
+msgid "Cura Backups"
+msgstr "Cura バックアップ"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Cura 4.3からCura 4.4へのコンフィグレーションアップグレート。"
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "グローバルスタックがありません。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3から4.4にバージョンアップグレート"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "モデルはマニホールドではありません。ハイライトされたエリアは、欠けている表面または無関係な表面を示します。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Cura 4.4からCura 4.5に設定をアップグレードします。"
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "モデルエラー"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4から4.5にバージョンアップグレート"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "レイヤーの厚さ"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Cura 4.5からCura 4.6に設定をアップグレードします。"
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "3Dプリンティング活用の鍵"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "バージョン4.5から4.6へのアップグレード"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- より多くのプリントプロファイルとプラグインを使用して作業をカスタマイズする\n"
+#~ "- 設定を同期させ、どこにでも読み込めるようにすることで柔軟性を保つ\n"
+#~ "- Ultimakerプリンターのリモートワークフローを活用して効率を高める"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "構成をCura 4.6.0からCura 4.6.2に更新します。"
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "アカウントを作成する"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "4.6.0から4.6.2へのバージョン更新"
+# can’t enter japanese text
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "&選択したモデルを削除"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "構成をCura 4.6.2からCura 4.7に更新します。"
+# can’t enter japanese text
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "選択したモデルを中央に移動"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2から4.7へのバージョン更新"
+# can’t edit japanese text
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "選択した複数のモデル"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Cura 4.7からCura 4.8に設定をアップグレードします。"
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "終わる"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "バージョン4.7から4.8へのアップグレード"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimakerアカウント"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3Dファイルを読むこむためのサポートを供給する。"
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "3Dプリンティング活用の鍵"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3Dリーダー"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- より多くの成果物プロファイルとプラグインを使用して作業をカスタマイズする"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XMLベースフィラメントのプロファイルを読み書きするための機能を供給する。"
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- 設定を同期させ、どこにでも読み込めるようにすることで柔軟性を保つ"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "フィラメントプロファイル"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Ultimakerプリンターのリモートワークフローを活用して効率を高める"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "透視ビューイング。"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "以下の手順で\n"
+#~ "Ultimaker Cura を設定してください。数秒で完了します。"
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "透視ビュー"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Ultimaker Cura の新機能"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/ja_JP/fdmextruder.def.json.po b/resources/i18n/ja_JP/fdmextruder.def.json.po
index 43e72922b6..f48659c981 100644
--- a/resources/i18n/ja_JP/fdmextruder.def.json.po
+++ b/resources/i18n/ja_JP/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Japanese\n"
diff --git a/resources/i18n/ja_JP/fdmprinter.def.json.po b/resources/i18n/ja_JP/fdmprinter.def.json.po
index e3f350e8ae..48453ae0c1 100644
--- a/resources/i18n/ja_JP/fdmprinter.def.json.po
+++ b/resources/i18n/ja_JP/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Japanese <info@lionbridge.com>, Japanese <info@bothof.nl>\n"
@@ -448,6 +448,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "各エクストルーダーが独自のヒーターを持つのではなく、単一のヒーターを共有するかどうか。"
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "拒否エリア"
@@ -515,8 +535,8 @@ msgstr "エクストルーダーのオフセット"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "エクストルーダーのオフセットを座標システムに適用します。"
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -915,8 +935,8 @@ msgstr "最初のレイヤーに線幅の乗数です。この値を増やすと
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "外郭"
+msgid "Walls"
+msgstr ""
 
 # msgstr "外郭"
 #: fdmprinter.def.json
@@ -989,170 +1009,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "外壁の後に挿入された移動の距離はZシームをよりよく隠します。"
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "上部表面用エクストルーダー"
-
-# msgstr "上層表面スキンエクストルーダー"
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "上部の表面印刷用のエクストルーダー。デュアルノズル印刷時に使用。"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "上部表面レイヤー"
-
-# msgstr "上の表皮層"
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "上部表面のレイヤー数。通常一層で綺麗に出来上がります。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "上部/底面エクストルーダー"
-
-# msgstr "トップ/ボトムエクストルーダー"
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "上部と下部の表面を印刷する時に使われるエクストルーダー。デュアルノズル印刷時に使用。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "上部/底面の厚さ"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "プリント時の最上面、最底面の厚み。これを積層ピッチで割った値で最上面、最低面のレイヤーの数を定義します。"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "上部厚さ"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "プリント時の最上面の厚み。これを積層ピッチで割った値で最上面のレイヤーの数を定義します。"
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "上部レイヤー"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "最上面のレイヤー数。トップの厚さを計算する場合、この値は整数になります。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "底面厚さ"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "プリント時の最底面の厚み。これを積層ピッチで割った値で最低面のレイヤーの数を定義します。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "底面レイヤー"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "最底面のレイヤー数。下の厚さで計算すると、この値は整数に変換されます。"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "初期底面レイヤー"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "ビルドプレートから上にある初期底面レイヤーの数。下の厚さで計算すると、この値は整数に変換されます。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "上層/底層パターン"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "上層/底層のパターン。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "直線"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "同心円"
-
-# msgstr "同心"
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "ジグザグ"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "底層初期レイヤー"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "第1層のプリントの底部のパターン。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "直線"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "同心円"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "ジグザグ"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "上層/底層ポリゴンに接合"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "互いに次に実行する上層/底層スキンパスに接合します。同心円のパターンの場合、この設定を有効にすることにより、移動時間が短縮されますが、インフィルまでの途中で接合があるため、この機能で上層面の品質が損なわれることがあります。"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "上層/底層ラインの向き"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "上/下のレイヤーが線またはジグザグパターンを使う際の整数線の方向のリスト。リストの要素は、層が進行するにつれて順番に使用され、リストの終わりに達すると、最初から再び開始されます。リスト項目はコンマで区切られ、リスト全体は大括弧で囲まれています。デフォルトは、従来のデフォルト角度（45度と135度）を使用する空のリストです。"
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "外壁はめ込み"
@@ -1468,6 +1324,180 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "有効時は、Zシームは各パーツの真ん中に設定されます。無効時はプラットフォームのサイズによって設定されます。"
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "上部表面用エクストルーダー"
+
+# msgstr "上層表面スキンエクストルーダー"
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "上部の表面印刷用のエクストルーダー。デュアルノズル印刷時に使用。"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "上部表面レイヤー"
+
+# msgstr "上の表皮層"
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "上部表面のレイヤー数。通常一層で綺麗に出来上がります。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "上部/底面エクストルーダー"
+
+# msgstr "トップ/ボトムエクストルーダー"
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "上部と下部の表面を印刷する時に使われるエクストルーダー。デュアルノズル印刷時に使用。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "上部/底面の厚さ"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "プリント時の最上面、最底面の厚み。これを積層ピッチで割った値で最上面、最低面のレイヤーの数を定義します。"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "上部厚さ"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "プリント時の最上面の厚み。これを積層ピッチで割った値で最上面のレイヤーの数を定義します。"
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "上部レイヤー"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "最上面のレイヤー数。トップの厚さを計算する場合、この値は整数になります。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "底面厚さ"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "プリント時の最底面の厚み。これを積層ピッチで割った値で最低面のレイヤーの数を定義します。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "底面レイヤー"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "最底面のレイヤー数。下の厚さで計算すると、この値は整数に変換されます。"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "初期底面レイヤー"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "ビルドプレートから上にある初期底面レイヤーの数。下の厚さで計算すると、この値は整数に変換されます。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "上層/底層パターン"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "上層/底層のパターン。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "直線"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "同心円"
+
+# msgstr "同心"
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "ジグザグ"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "底層初期レイヤー"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "第1層のプリントの底部のパターン。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "直線"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "同心円"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "ジグザグ"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "上層/底層ポリゴンに接合"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "互いに次に実行する上層/底層スキンパスに接合します。同心円のパターンの場合、この設定を有効にすることにより、移動時間が短縮されますが、インフィルまでの途中で接合があるため、この機能で上層面の品質が損なわれることがあります。"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "上層/底層ラインの向き"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "上/下のレイヤーが線またはジグザグパターンを使う際の整数線の方向のリスト。リストの要素は、層が進行するにつれて順番に使用され、リストの終わりに達すると、最初から再び開始されます。リスト項目はコンマで区切られ、リスト全体は大括弧で囲まれています。デフォルトは、従来のデフォルト角度（45度と135度）を使用する空のリストです。"
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Z 軸ギャップにスキンなし"
@@ -1619,6 +1649,91 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "壁とスキンの中央ライン（のエンドポイント）が交差する量を調整します。わずかな交差によって、壁がスキンにしっかりつながります。スキンと壁のライン幅が同じで、壁の幅が半分以上の値になると、スキンが壁を通過している可能性があります。これは、その時点で、スキン押出機のノズルの位置が、すでに壁の真ん中を過ぎている可能性があるためです。"
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "表面除去幅"
+
+# msgstr "スキン除去幅"
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "上面除去幅"
+
+# msgstr "トップスキン除去幅"
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "底面除去幅"
+
+# msgstr "ボトムのスキン除去幅"
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "表面展開距離"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "上面展開距離"
+
+# msgstr "トップのスキンの展開距離"
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "底面展開距離"
+
+# msgstr "ボトムのスキンの展開距離"
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "表面展開最大角"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "表面展開最小角"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "これより狭いスキン領域は展開されません。モデル表面に、垂直に近い斜面がある場合に作成される狭いスキン領域の拡大を回避するためです。"
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "インフィル"
@@ -1939,91 +2054,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "インフィルが追加される内部オーバーハングの最小角度。0° のとき、対象物は完全にインフィルが充填され、90° ではインフィルが提供されません。"
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "表面除去幅"
-
-# msgstr "スキン除去幅"
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "上面除去幅"
-
-# msgstr "トップスキン除去幅"
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "底面除去幅"
-
-# msgstr "ボトムのスキン除去幅"
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "取り除くスキンエリアの最大幅。この値より小さいすべてのスキンエリアは消えます。これは、モデルの傾斜表面の上部/下部スキンに費やした時間のや材料の量を制限することができます。"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "表面展開距離"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "上面展開距離"
-
-# msgstr "トップのスキンの展開距離"
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "底面展開距離"
-
-# msgstr "ボトムのスキンの展開距離"
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "スキンがインフィルまで到達する距離です。高い数値の場合、スキンはインフィルのパターンに隣接しやすく、近接する壁のレイヤーもスキンに密着しやすくなります。低値の場合、材料の使用量を節約します。"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "表面展開最大角"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "この設定より大きい角を持つオブジェクトの上部または底部の表面、その表面のスキンはを拡大しません。これは、モデルのサーフェスに近い垂直斜面がある場合に作成される狭いスキン領域の拡大を回避します。0 ° の角度は水平方向、90 ° の角度が垂直方向です。"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "表面展開最小角"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "これより狭いスキン領域は展開されません。モデル表面に、垂直に近い斜面がある場合に作成される狭いスキン領域の拡大を回避するためです。"
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "スキンエッジサポートの厚さ"
@@ -2643,8 +2673,8 @@ msgstr "初期レイヤー速度"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "一層目での速度。ビルトプレートへの接着を向上するため低速を推奨します。"
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5195,8 +5225,8 @@ msgstr "メッシュ処理ランク"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "インフィルメッシュの重なりが複数生じた場合のこのメッシュの優先度を決定します。複数のインフィルメッシュの重なりがあるエリアでは、最もランクが低いメッシュの設定になります。順序が高いインフィルメッシュは、順序が低いインフィルメッシュのインフィルと通常のメッシュを変更します。"
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5558,6 +5588,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "印刷可能になったオーバーハングの最大角度。 0°の値では、すべてのオーバーハングがビルドプレートに接続されたモデルの一部に置き換えられます。90°では、モデルは決して変更されません。"
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "コースティングを有効にする"
@@ -6495,6 +6535,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "ファイルから読み込むときに、モデルに適用するトランスフォーメーションマトリックス。"
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "エクストルーダーのオフセットを座標システムに適用します。"
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "外郭"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "この設定より大きい角を持つオブジェクトの上部または底部の表面、その表面のスキンはを拡大しません。これは、モデルのサーフェスに近い垂直斜面がある場合に作成される狭いスキン領域の拡大を回避します。0 ° の角度は水平方向、90 ° の角度が垂直方向です。"
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "一層目での速度。ビルトプレートへの接着を向上するため低速を推奨します。"
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "インフィルメッシュの重なりが複数生じた場合のこのメッシュの優先度を決定します。複数のインフィルメッシュの重なりがあるエリアでは、最もランクが低いメッシュの設定になります。順序が高いインフィルメッシュは、順序が低いインフィルメッシュのインフィルと通常のメッシュを変更します。"
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "加熱式ビルドプレート温度。これが 0 の場合、ベッド温度は調整されません。"
diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po
index 31c687c231..a15fcdb6c6 100644
--- a/resources/i18n/ko_KR/cura.po
+++ b/resources/i18n/ko_KR/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:08+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "알 수 없는"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "기기로드 중 ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "아래 프린터는 그룹에 속해 있기 때문에 연결할 수 없습니다"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "환경 설정을 설정하는 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "사용 가능한 네트워크 프린터"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "활성 기기 초기화 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "재정의되지 않음"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "패키지 관리자 초기화 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "정말로 {0}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "출력 사이즈 초기화 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "장면 설정 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "뛰어난 외관"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "인터페이스 로드 중 ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "시각적 프로파일은 높은 시각적 및 표면 품질의 의도를 지니고 시각적 프로토타입과 모델을 인쇄하기 위해 설계되었습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "엔진 초기화 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "엔지니어링 프로파일은 정확도를 개선하고 허용 오차를 좁히려는 의도로 기능 프로토타입 및 최종 사용 부품을 인쇄하도록 설계되었습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "한 번에 하나의 G-코드 파일만 로드 할 수 있습니다. {0} 가져 오기를 건너 뛰었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "초안"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "경고"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "초안 프로파일은 인쇄 시간을 상당히 줄이려는 의도로 초기 프로토타입과 컨셉트 확인을 인쇄하도록 설계되었습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-코드가 로드되어 있으면 다른 파일을 열 수 없습니다. {0} 가져 오기를 건너 뛰었습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "오류"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "정말로 {0}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "사용자 정의 소재"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "사용자 정의"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "알 수 없는"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "사용자 정의 프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "지원되는 모든 유형 ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "모든 파일 (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "로그인 실패"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "객체의 새 위치 찾기"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "위치 찾기"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "뛰어난 외관"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "모든 개체가 출력할 수 있는 최대 사이즈 내에 위치할 수 없습니다"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "시각적 프로파일은 높은 시각적 및 표면 품질의 의도를 지니고 시각적 프로토타입과 모델을 인쇄하기 위해 설계되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "위치를 찾을 수 없음"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "사용자 데이터 디렉터리에서 압축 파일을 만들 수 없습니다: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "엔지니어링 프로파일은 정확도를 개선하고 허용 오차를 좁히려는 의도로 기능 프로토타입 및 최종 사용 부품을 인쇄하도록 설계되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "백업"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "초안"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "적절한 데이터 또는 메타 데이터 없이 Cura 백업을 복원하려고 시도했습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "초안 프로파일은 인쇄 시간을 상당히 줄이려는 의도로 초기 프로토타입과 컨셉트 확인을 인쇄하도록 설계되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "현재 버전보다 높은 Cura 백업을 복원하려고 시도했습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "아래 프린터는 그룹에 속해 있기 때문에 연결할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "\"프린팅 순서\"설정 값으로 인해 갠트리가 프린팅 된 모델과 충돌하지 않도록 출력물 높이가 줄어 들었습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "사용 가능한 네트워크 프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "출력물 크기"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "재정의되지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "큐라를 시작할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                     <p> 문제를 해결하기 위해이 오류 보고서를 보내주십시오. </ p>\n"
 "                 "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "충돌 보고서를 Ultimaker에 보내기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "충돌 리포트 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "설정 폴더 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "백업 및 리셋 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "충돌 보고서"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1146 +249,848 @@ msgstr ""
 "            <p>\"보고서 전송\" 버튼을 사용하면 버그 보고서가 서버에 자동으로 전달됩니다</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "시스템 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "알 수 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura 버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura 언어"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "OS 언어"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "플랫폼"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt 버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt 버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "아직 초기화되지 않음<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL 버전: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL 공급업체: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "오류 추적"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "로그"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "보고서 전송"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "기기로드 중 ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "환경 설정을 설정하는 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "활성 기기 초기화 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "패키지 관리자 초기화 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "출력 사이즈 초기화 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "장면 설정 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "인터페이스 로드 중 ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "엔진 초기화 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "한 번에 하나의 G-코드 파일만 로드 할 수 있습니다. {0} 가져 오기를 건너 뛰었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "경고"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-코드가 로드되어 있으면 다른 파일을 열 수 없습니다. {0} 가져 오기를 건너 뛰었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "오류"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "객체를 증가시키고 배치"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "개체 배치 중"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "개체 배치 중"
+msgid "Login failed"
+msgstr "로그인 실패"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "응답을 읽을 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "새 로그인 작업을 시작할 수 없습니다. 다른 로그인 작업이 진행 중인지 확인하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker 계정 서버에 도달할 수 없음."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "입력한 상태가 올바르지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "이 응용 프로그램을 인증할 때 필요한 권한을 제공하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "로그인을 시도할 때 예기치 못한 문제가 발생했습니다. 다시 시도하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "새 로그인 작업을 시작할 수 없습니다. 다른 로그인 작업이 진행 중인지 확인하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker 계정 서버에 도달할 수 없음."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "파일이 이미 있습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "파일 <filename>{0}</filename>이 이미 있습니다. 덮어 쓰시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "유효하지 않은 파일 URL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "노즐"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "익스트루더의 현재 가용성과 일치하도록 설정이 변경되었습니다:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "설정이 업데이트되었습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "익스트루더 비활성화됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "프로파일을 <filename>{0}</filename>: <message>{1}</message>로 내보내는데 실패했습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "프로파일을 <filename>{0}</filename>로 내보내지 못했습니다. Writer 플러그인이 오류를 보고했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "프로파일을 <filename>{0}</filename> 에 내보냅니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "내보내기 완료"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다 {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "프린터가 추가되기 전 <filename>{0}</filename>에서 프로파일을 가져올 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "<filename>{0}</filename>(으)로 가져올 사용자 정의 프로파일이 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "프로파일 <filename>{0}</filename>에는 정확하지 않은 데이터가 포함되어 있으므로, 불러올 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "프로파일 {0}을(를) 성공적으로 가져왔습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "파일 {0}에 유효한 프로파일이 포함되어 있지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "프로파일 {0}에 알 수 없는 파일 유형이 있거나 손상되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "사용자 정의 프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "프로파일에 품질 타입이 누락되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "전체 스택이 누락되었습니다."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "프로파일을 추가할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "'{0}' 품질 타입은 현재 활성 기기 정의 '{1}'와(과) 호환되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "경고: 프로파일은 '{0}' 품질 타입을 현재 구성에 이용할 수 없기 때문에 찾을 수 없습니다. 이 품질 타입을 사용할 수 있는 재료/노즐 조합으로 전환하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "지원되지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "노즐"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "익스트루더의 현재 가용성과 일치하도록 설정이 변경되었습니다:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "객체의 새 위치 찾기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "설정이 업데이트되었습니다"
+msgid "Finding Location"
+msgstr "위치 찾기"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "모든 개체가 출력할 수 있는 최대 사이즈 내에 위치할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "익스트루더 비활성화됨"
+msgid "Can't Find Location"
+msgstr "위치를 찾을 수 없음"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "그룹 #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "추가"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "종료"
+msgid "Close"
+msgstr "닫기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "취소"
+msgid "Next"
+msgstr "다음"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "그룹 #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "종료"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "외벽"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "내벽"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "스킨"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "내부채움"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "내부채움 서포트"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "지원하는 인터페이스"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "서포트"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "스커트"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "프라임 타워"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "움직임 경로"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "리트랙션"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "다른"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "다음"
+msgid "Add"
+msgstr "추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "닫기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D 모델 도우미"
+msgid "Cancel"
+msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>하나 이상의 3D 모델이 모델 크기 및 재료 구성으로 인해 최적의 상태로 인쇄되지 않을 수 있습니다.</p>\n"
-"<p>{model_names}</p>\n"
-"<p>인쇄 품질 및 안정성을 최고로 높이는 방법을 알아보십시오.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">인쇄 품질 가이드 보기</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "프로젝트 파일 <filename>{0}</filename>에 알 수 없는 기기 유형 <message>{1}</message>이(가) 포함되어 있습니다. 기기를 가져올 수 없습니다. 대신 모델을 가져옵니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "프로젝트 파일 열기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "프로젝트 파일 <filename>{0}</filename>에 갑자기 접근할 수 없습니다: <message>{1}</message>."
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "\"프린팅 순서\"설정 값으로 인해 갠트리가 프린팅 된 모델과 충돌하지 않도록 출력물 높이가 줄어 들었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "프로젝트 파일 열 수 없음"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "프로젝트 파일 <filename>{0}</filename>이(가) 이 버전의 Ultimaker Cura에서 확인할 수 없는 프로파일을 사용하였습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "추천"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "사용자 정의"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF 기록기 플러그인이 손상되었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "여기서 작업 환경을 작성할 권한이 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "운영 체제가 프로젝트 파일을 이 위치로 또는 이 파일명으로 저장하지 못합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "3MF 파일 작성 중 오류."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF 파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura 프로젝트 3MF 파일"
+msgid "Build Volume"
+msgstr "출력물 크기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF 파일"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "사용자 데이터 디렉터리에서 압축 파일을 만들 수 없습니다: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Backups"
+msgid "Backup"
 msgstr "백업"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "백업을 업로드하는 도중 오류가 있었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "백업 생성 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "백업을 생성하는 도중 오류가 있었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "백업 업로드 중..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "백업이 업로드를 완료했습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "백업이 최대 파일 크기를 초과했습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "백업 복원 시도 중 오류가 있었습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "백업 관리"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "선택한 소재 또는 구성과 호환되지 않기 때문에 현재 소재로 슬라이스 할 수 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "슬라이스 할 수 없습니다"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "현재 설정으로 슬라이스 할 수 없습니다. 다음 설정에는 오류가 있습니다 : {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "일부 모델별 설정으로 인해 슬라이스할 수 없습니다. 하나 이상의 모델에서 다음 설정에 오류가 있습니다. {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "프라임 타워 또는 위치가 유효하지 않아 슬라이스 할 수 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "비활성화된 익스트루더 %s(와)과 연결된 개체가 있기 때문에 슬라이스할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "적절한 데이터 또는 메타 데이터 없이 Cura 백업을 복원하려고 시도했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"설정을 검토하고 모델이 다음 사항에 해당하는지 확인하십시오.\n"
-"- 출력 사이즈 내에 맞춤화됨\n"
-"- 활성화된 익스트루더로 할당됨\n"
-"- 수정자 메쉬로 전체 설정되지 않음"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "현재 버전보다 높은 Cura 백업을 복원하려고 시도했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "레이어 처리 중"
+msgid "Multiplying and placing objects"
+msgstr "객체를 증가시키고 배치"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "정보"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 프로파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "업데이트 정보에 액세스 할 수 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "사용자의 {machine_name}에서 새로운 기능 또는 버그 수정 사항을 사용할 수 있습니다! 최신 버전이 아닌 경우 프린터의 펌웨어를 버전 {latest_version}으로 업데이트하는 것이 좋습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "새로운 %s 펌웨어를 사용할 수 있습니다"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "업데이트하는 방법"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "펌웨어 업데이트"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "압축된 G-code 파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter는 텍스트 모드는 지원하지 않습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code 파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G 코드 파싱"
+msgid "Placing Objects"
+msgstr "개체 배치 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-코드 세부 정보"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "파일을 보내기 전에 g-코드가 프린터 및 프린터 구성에 적합한 지 확인하십시오. g-코드가 정확하지 않을 수 있습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter는 텍스트가 아닌 모드는 지원하지 않습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "내보내기 전에 G-code를 준비하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 이미지"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 이미지"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 이미지"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 이미지"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 이미지"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 프로파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "기기 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "모니터"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "모델 별 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "모델 별 설정 구성"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "후 처리"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G 코드 수정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "준비"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "미리 보기"
+msgid "Placing Object"
+msgstr "개체 배치 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "이동식 드라이브에 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "이동식 드라이브  {0}에 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "쓸 수있는 파일 형식이 없습니다!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "이동식 드라이브 <filename>{0}</filename>에 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename>: <message>{1}</message> 에 저장할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "{device} 장치에 쓸 때 파일 이름을 찾을 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "이동식 드라이브  {0}: {1} 에 저장할 수 없습니다 :"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "이동식 드라이브 {0}에 {1}로 저장되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "파일이 저장됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "꺼내기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "이동식 장치 {0} 꺼내기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0}가 배출됐습니다. 이제 드라이브를 안전하게 제거 할 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "하드웨어 안전하게 제거"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "{0}를 배출하지 못했습니다. 다른 프로그램이 드라이브를 사용 중일 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "이동식 드라이브"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "와이어 프린팅이 활성화되어 있을 때 Cura는 레이어를 정확하게 표시하지 않습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "시뮬레이션 뷰"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "먼저 슬라이스해야 하기 때문에 아무것도 표시되지 않습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "표시할 레이어 없음"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "다시 메시지 표시 안 함"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "레이어 뷰"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "매니폴드 모델이 아닙니다. 강조 표시된 영역은 누락되거나 관련 없는 표면을 표시합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "모델 오류"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "솔리드 뷰"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "서포트 차단기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "서포트가 프린팅되지 않는 볼륨을 만듭니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "귀하의 계정으로 재료와 소프트웨어 패키지를 동기화하시겠습니까?"
+msgid "AMF File"
+msgstr "AMF 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimaker 계정에서 변경 사항이 감지되었습니다"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "동기화"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "펌웨어 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "동기화 중..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "거절"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "동의"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "플러그인 사용 계약"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "계정에서 거절 및 제거"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{}개의 플러그인을 다운로드하지 못했습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "동기화 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Ultimaker 계정에서 변경 사항이 감지되었습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "변경 사항이 적용되기 전에 {}을(를) 멈추고 다시 시작해야 합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{}개의 플러그인을 다운로드하지 못했습니다"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "귀하의 계정으로 재료와 소프트웨어 패키지를 동기화하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "동기화"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "모델 별 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "모델 별 설정 구성"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "후 처리"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G 코드 수정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "선택한 소재 또는 구성과 호환되지 않기 때문에 현재 소재로 슬라이스 할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 포맷 패키지"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "슬라이스 할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFP 파일에 쓸 수 없음:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "현재 설정으로 슬라이스 할 수 없습니다. 다음 설정에는 오류가 있습니다 : {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "레벨 빌드 플레이트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "일부 모델별 설정으로 인해 슬라이스할 수 없습니다. 하나 이상의 모델에서 다음 설정에 오류가 있습니다. {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "업그레이드 선택"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "프라임 타워 또는 위치가 유효하지 않아 슬라이스 할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Cloud를 통해 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "비활성화된 익스트루더 %s(와)과 연결된 개체가 있기 때문에 슬라이스할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Cloud를 통해 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"설정을 검토하고 모델이 다음 사항에 해당하는지 확인하십시오.\n"
+"- 출력 사이즈 내에 맞춤화됨\n"
+"- 활성화된 익스트루더로 할당됨\n"
+"- 수정자 메쉬로 전체 설정되지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Cloud를 통해 연결됨"
+msgid "Processing Layers"
+msgstr "레이어 처리 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "프린트 작업 업로드 시 알 수 없는 오류 코드: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "정보"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 프린팅"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USB를 통해 프린팅"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USB를 통해 프린팅"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USB를 통해 연결"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB 인쇄가 진행 중입니다. Cura를 닫으면 인쇄도 중단됩니다. 계속하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "프린트가 아직 진행 중입니다. Cura는 이전 프린트가 완료될 때까지는 USB를 통해 다른 프린트를 시작할 수 없습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "프린트 진행 중"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 프로파일"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "네트워크를 통해 연결"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimaker 계정에서 새 프린터가 감지되었습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "사용자 계정에서 프린터 {name}({model}) 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "... 및 기타 {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factory에서 프린터 추가:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "일부 프린터에서는 클라우드 연결을 사용할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "다음 프린터는 Digital Factory에 연결되어 있지 않습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "연결을 설정하려면 {website_link}에 방문하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "프린터 구성 유지"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "프린터 제거"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "다음 계정 동기화 시까지 {printer_name}이(가) 제거됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name}을(를) 영구적으로 제거하려면 {digital_factory_link}을(를) 방문하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "일시적으로 {printer_name}을(를) 제거하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "프린터를 제거하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1368,7 +1103,7 @@ msgstr[0] ""
 "Cura에서 {0} 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
 "정말로 계속하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1377,2085 +1112,2478 @@ msgstr ""
 "Cura에서 모든 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
 "정말로 계속하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Ultimaker 계정을 사용하여 어디에서든 인쇄 작업을 전송하고 모니터링하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Cloud를 통해 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factory에 연결"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Cloud를 통해 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "시작하기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Cloud를 통해 연결됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "프린트 작업 업로드 시 알 수 없는 오류 코드: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connect를 실행하지 않는 프린터에 연결하려 합니다. 프린터를 최신 펌웨어로 업데이트해 주십시오."
+msgid "tomorrow"
+msgstr "내일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "프린터 업데이트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "오늘"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura가 {0} 그룹의 호스트 프린터에 설치되지 않은 재료 프로파일을 감지했습니다."
+msgid "Sending Print Job"
+msgstr "인쇄 작업 전송"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "재료를 프린터로 전송 중"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "프린트 작업을 프린터로 업로드하고 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "연결 시도 중인 {0}이(가) 그룹의 호스트가 아닙니다. 웹 페이지에서 그룹 호스트로 설정할 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "그룹 호스트 아님"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "그룹 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Ultimaker 계정을 사용하여 어디에서든 인쇄 작업을 전송하고 모니터링하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factory에 연결"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "시작하기"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "현재 작업이 전송될 때까지 기다려주십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "프린트 오류"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "데이터를 프린터로 업로드할 수 없음."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "네트워크 오류"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "인쇄 작업 전송"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura가 {0} 그룹의 호스트 프린터에 설치되지 않은 재료 프로파일을 감지했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "프린트 작업을 프린터로 업로드하고 있습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "재료를 프린터로 전송 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "프린트 작업 대기열이 가득 찼습니다. 프린터가 새 작업을 수락할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "대기열 가득 참"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "출력 작업이 프린터에 성공적으로 보내졌습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "데이터 전송 됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connect를 실행하지 않는 프린터에 연결하려 합니다. 프린터를 최신 펌웨어로 업데이트해 주십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "프린터 업데이트"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "네트워크를 통해 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "네트워크를 통해 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "네트워크를 통해 연결됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "네트워크를 통해 연결"
+msgid "Select upgrades"
+msgstr "업그레이드 선택"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "내일"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "레벨 빌드 플레이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "오늘"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "추천"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "사용자 정의"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USB를 통해 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "프로젝트 파일 <filename>{0}</filename>에 알 수 없는 기기 유형 <message>{1}</message>이(가) 포함되어 있습니다. 기기를 가져올 수 없습니다. 대신 모델을 가져옵니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USB를 통해 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "프로젝트 파일 열기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USB를 통해 연결"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "프로젝트 파일 <filename>{0}</filename>에 갑자기 접근할 수 없습니다: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB 인쇄가 진행 중입니다. Cura를 닫으면 인쇄도 중단됩니다. 계속하시겠습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "프로젝트 파일 열 수 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "프린트가 아직 진행 중입니다. Cura는 이전 프린트가 완료될 때까지는 USB를 통해 다른 프린트를 시작할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "프린트 진행 중"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "프로젝트 파일 <filename>{0}</filename>이(가) 이 버전의 Ultimaker Cura에서 확인할 수 없는 프로파일을 사용하였습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 파일"
+msgid "3MF File"
+msgstr "3MF 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "엑스레이 뷰"
+msgid "Compressed G-code File"
+msgstr "압축된 G-code 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "이 출력물에는 문제가있을 수 있습니다. 조정을 위한 도움말을 보려면 클릭하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter는 텍스트 모드는 지원하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "프로젝트 열기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D 모델 도우미"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "기존 업데이트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>하나 이상의 3D 모델이 모델 크기 및 재료 구성으로 인해 최적의 상태로 인쇄되지 않을 수 있습니다.</p>\n"
+"<p>{model_names}</p>\n"
+"<p>인쇄 품질 및 안정성을 최고로 높이는 방법을 알아보십시오.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">인쇄 품질 가이드 보기</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "새로 만들기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "업데이트 정보에 액세스 할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "요약 - Cura 프로젝트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "사용자의 {machine_name}에서 새로운 기능 또는 버그 수정 사항을 사용할 수 있습니다! 최신 버전이 아닌 경우 프린터의 펌웨어를 버전 {latest_version}으로 업데이트하는 것이 좋습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "프린터 설정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "새로운 %s 펌웨어를 사용할 수 있습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "기기의 충돌을 어떻게 해결해야합니까?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "업데이트하는 방법"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "유형"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "프린터 그룹"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G 코드 파싱"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "프로파일 설정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-코드 세부 정보"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "파일을 보내기 전에 g-코드가 프린터 및 프린터 구성에 적합한 지 확인하십시오. g-코드가 정확하지 않을 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "서포트 차단기"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "프로파일의 충돌을 어떻게 해결해야합니까?"
+msgid "Create a volume in which supports are not printed."
+msgstr "서포트가 프린팅되지 않는 볼륨을 만듭니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "이름"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "프로파일에 없음"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 무시"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivative from"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 무시"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "재료 설정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 포맷 패키지"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "재료의 충돌은 어떻게 해결되어야합니까?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "표시 설정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "준비"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "종류"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "모니터"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "표시 설정 :"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "엑스레이 뷰"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "1 out of %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "3MF 파일 작성 중 오류."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "프로젝트를 로드하면 빌드 플레이트의 모든 모델이 지워집니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "열기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura 프로젝트 3MF 파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "무엇을 더 하시겠습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF 기록기 플러그인이 손상되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "지금 백업"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "여기서 작업 환경을 작성할 권한이 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "자동 백업"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "운영 체제가 프로젝트 파일을 이 위치로 또는 이 파일명으로 저장하지 못합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura가 시작되는 날마다 자동으로 백업을 생성하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "미리 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "복원"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "레이어 뷰"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "백업 삭제"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "와이어 프린팅이 활성화되어 있을 때 Cura는 레이어를 정확하게 표시하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "이 백업을 삭제하시겠습니까? 이 작업을 완료할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "시뮬레이션 뷰"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "백업 복원"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "먼저 슬라이스해야 하기 때문에 아무것도 표시되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "백업이 복원되기 전에 Cura를 다시 시작해야 합니다. 지금 Cura를 닫으시겠습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "표시할 레이어 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 버전"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "다시 메시지 표시 안 함"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "기기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "기기 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "재료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "솔리드 뷰"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "프로파일"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "플러그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 백업"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "내 백업"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFP 파일에 쓸 수 없음:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "현재 백업이 없습니다. ‘지금 백업’ 버튼을 사용하여 생성하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter는 텍스트가 아닌 모드는 지원하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "미리 보기 단계 중에는 보이는 백업 5개로 제한됩니다. 기존 백업을 보려면 백업을 제거하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "내보내기 전에 G-code를 준비하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura 설정을 백업, 동기화하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 이미지"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "로그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 이미지"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG 이미지"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP 이미지"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 이미지"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "백업 복원 시도 중 오류가 있었습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "백업"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "백업을 업로드하는 도중 오류가 있었습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "백업 생성 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "백업을 생성하는 도중 오류가 있었습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "백업 업로드 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "백업이 업로드를 완료했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "백업이 최대 파일 크기를 초과했습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "백업 관리"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "펌웨어 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "펌웨어는 3D 프린터에서 직접 실행되는 소프트웨어입니다. 이 펌웨어는 스텝 모터를 제어하고 온도를 조절하며 프린터를 작동시킵니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "새 프린터와 함께 제공되는 펌웨어는 작동하지만 새로운 버전은 더 많은 기능과 향상된 기능을 제공하는 경향이 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "펌웨어 자동 업그레이드"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "사용자 정의 펌웨어 업로드"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "프린터와 연결되지 않아 펌웨어를 업데이트할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "프린터와 연결이 펌웨어 업그레이드를 지원하지 않아 펌웨어를 업데이트할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "사용자 정의 펌웨어 선택"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "펌웨어 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "펌웨어 업데이트 중."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "펌웨어 업데이트가 완료되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "알 수 없는 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "통신 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "입/출력 오류로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "펌웨어 누락으로 인해 펌웨어 업데이트에 실패했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "이미지 변환 ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "\"Base\"에서 각 픽셀까지의 최대 거리."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "높이 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "밀리미터 단위의 빌드 플레이트에서 기저부 높이."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "바닥 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "빌드 플레이트의 폭 (밀리미터)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "너비 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "빌드 플레이트의 깊이 (밀리미터)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "깊이 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "리쏘페인(투각)의 경우 들어오는 더 많은 빛을 차단하기 위해서는 다크 픽셀이 더 두꺼운 위치에 해당해야 합니다. 높이 지도의 경우 더 밝은 픽셀이 더 높은 지역을 나타냅니다. 따라서 생성된 3D 모델에서 더 밝은 픽셀이 더 두꺼운 위치에 해당해야 합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "어두울수록 높음"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "밝을수록 높음"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "리쏘페인의 경우 반투명성을 위한 간단한 로그 모델을 사용할 수 있습니다. 높이 지도의 경우, 픽셀 값은 높이에 선형적으로 부합합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "직선 모양"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "반투명성"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "두께가 1mm인 출력물을 관통하는 빛의 비율 이 값을 낮추면 어두운 부분의 대조가 증가하고 이미지의 밝은 부분의 대조가 감소합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm의 투과율(%)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "이미지에 적용할 스무딩(smoothing)의 정도."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "스무딩(smoothing)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "확인"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "프린터"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "노즐 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "노즐 크기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "호환되는 재료의 직경"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "노즐 오프셋 X"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "노즐 오프셋 Y"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "냉각 팬 번호"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "익스트루더 시작 Gcode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "익스트루더 종료 Gcode"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "프린터 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (너비)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (깊이)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (높이)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "빌드 플레이트 모양"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "중앙이 원점"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "히트 베드"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "히팅 빌드 사이즈"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "시장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Gcode 유형"
+msgid "You need to accept the license to install the package"
+msgstr "패키지를 설치하려면 라이선스를 수락해야 합니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "프린트헤드 설정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "계정의 변경 사항"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 최소값"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 최소값"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "다음 것"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "X max"
-msgstr "X 최대값"
+msgid "The following packages will be added:"
+msgstr "다음 패키지가 추가됩니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y 최대값"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "호환되지 않는 Cura 버전이기 때문에 다음 패키지를 설치할 수 없습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "갠트리 높이"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "제거 확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "익스트루더의 수"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "아직 사용 중인 재료 및/또는 프로파일을 제거합니다. 확인하면 다음 재료/프로파일이 기본값으로 재설정됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "시작 GCode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "End GCode"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"프린터에 연결이 있는지 확인하십시오.⏎- 프린터가 켜져 있는지 확인하십시오.\n"
-"- 프린터가 네트워크에 연결되어 있는지 확인하십시오.⏎- 클라우드로 연결된 프린터를 탐색할 수 있도록 로그인되어 있는지 확인하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "프린터를 네트워크에 연결하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "사용자 매뉴얼 온라인 보기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "메쉬 유형"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "일반 모델"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "서포터로 프린팅"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "오버랩 설정 수정"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Cura 패키지 데이터베이스에 연결할 수 없습니다. 연결을 확인하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "오버랩 지원 안함"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "매쉬 내부채움 전용"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "커팅 메쉬"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "설정 선택"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "이 모델에 맞게 사용자 정의 설정을 선택하십시오"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "필터..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "모두 보이기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "후처리 플러그인"
+msgid "Community Contributions"
+msgstr "커뮤니티 기여"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "후처리 스크립트"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "스크립트 추가"
+msgid "Community Plugins"
+msgstr "커뮤니티 플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
 msgctxt "@label"
-msgid "Settings"
-msgstr "설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "활성 사후 처리 스크립트를 변경하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "다음 스크립트들이 활성화됩니다:"
+msgid "Generic Materials"
+msgstr "일반 재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "색 구성표"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "재료 색상"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "라인 유형"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "속도"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "레이어 두께"
+msgid "Version"
+msgstr "버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "호환 모드"
+msgid "Last updated"
+msgstr "마지막으로 업데이트한 날짜"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "이동"
+msgid "Brand"
+msgstr "상표"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
-msgid "Helpers"
-msgstr "도움말"
+msgid "Downloads"
+msgstr "다운로드"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "외곽"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
+msgstr "설치된 플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "내부채움"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "설치된 플러그인이 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "상단 레이어 만 표시"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "설치된 재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "상단에 5 개의 세부 레이어 표시"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "설치된 재료가 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "위 / 아래"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "번들 플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "내벽"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "번들 재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "min"
-msgstr "최소"
+msgid "Website"
+msgstr "웹 사이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "max"
-msgstr "최대"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "익명 데이터 수집에 대한 추가 정보"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 익명 데이터를 수집합니다. 공유되는 모든 데이터의 예는 다음과 같습니다:"
+msgid "Email"
+msgstr "이메일"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "익명 데이터 전송을 원하지 않습니다"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Ultimaker Cura Enterprise용으로 검증된 플러그인 및 재료를 받으려면 로그인하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "익명 데이터 전송 허용"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "로그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "뒤로"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "패키지 가져오는 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
 msgid "Compatibility"
 msgstr "호환성"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
 msgctxt "@label:table_header"
 msgid "Machine"
 msgstr "기기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
 msgctxt "@label:table_header"
 msgid "Build Plate"
 msgstr "빌드 플레이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
 msgctxt "@label:table_header"
 msgid "Support"
 msgstr "서포트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
 msgctxt "@label:table_header"
 msgid "Quality"
 msgstr "품질"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
 msgid "Technical Data Sheet"
 msgstr "기술 데이터 시트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
 msgctxt "@action:label"
 msgid "Safety Data Sheet"
 msgstr "안전 데이터 시트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
 msgctxt "@action:label"
 msgid "Printing Guidelines"
 msgstr "인쇄 가이드라인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
 msgctxt "@action:label"
 msgid "Website"
 msgstr "웹 사이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "플러그인"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "재료"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
 msgid "Installed"
 msgstr "설치됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "설치 또는 업데이트에 <a href='%1'>로그인</a> 필요"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "웹 마켓플레이스로 이동"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>재료 스플 구입</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "다시 시작 시 설치 예정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "업데이트 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "업데이트됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "업데이트에 <a href='%1'>로그인</a> 필요"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "다운그레이드"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "설치 제거"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "설치됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "설치 또는 업데이트에 <a href='%1'>로그인</a> 필요"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>재료 스플 구입</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
 msgid "Premium"
 msgstr "프리미엄"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "웹 마켓플레이스로 이동"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
 msgctxt "@label"
 msgid "Search materials"
 msgstr "재료 검색"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
 msgid "You will need to restart Cura before changes in packages have effect."
 msgstr "패키지의 변경 사항이 적용되기 전에 Cura를 다시 시작해야 합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr "%1 종료"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "플러그인"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "재료"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "설치됨"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "다시 시작 시 설치 예정"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "업데이트에 <a href='%1'>로그인</a> 필요"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "다운그레이드"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "설치 제거"
+msgid "Back"
+msgstr "뒤로"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
 msgctxt "@action:button"
 msgid "Install"
 msgstr "설치"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "계정의 변경 사항"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "메쉬 유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "취소"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+msgctxt "@label"
+msgid "Normal model"
+msgstr "일반 모델"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "다음 것"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+msgctxt "@label"
+msgid "Print as support"
+msgstr "서포터로 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "다음 패키지가 추가됩니다:"
+msgid "Modify settings for overlaps"
+msgstr "오버랩 설정 수정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "호환되지 않는 Cura 버전이기 때문에 다음 패키지를 설치할 수 없습니다:"
+msgid "Don't support overlaps"
+msgstr "오버랩 지원 안함"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "제거 확인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "매쉬 내부채움 전용"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "아직 사용 중인 재료 및/또는 프로파일을 제거합니다. 확인하면 다음 재료/프로파일이 기본값으로 재설정됩니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "커팅 메쉬"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "재료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "설정 선택"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "프로파일"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "이 모델에 맞게 사용자 정의 설정을 선택하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "확인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "필터..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "패키지를 설치하려면 라이선스를 수락해야 합니다"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "모두 보이기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
-msgstr "웹 사이트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "후처리 플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Email"
-msgstr "이메일"
+msgid "Post Processing Scripts"
+msgstr "후처리 스크립트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
-msgstr "버전"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "스크립트 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "Last updated"
-msgstr "마지막으로 업데이트한 날짜"
+msgid "Settings"
+msgstr "설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "상표"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "활성 사후 처리 스크립트를 변경하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "다운로드"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "다음 스크립트들이 활성화됩니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "커뮤니티 기여"
+msgid "Queued"
+msgstr "대기 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
-msgstr "커뮤니티 플러그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "브라우저에서 관리"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "일반 재료"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Cura 패키지 데이터베이스에 연결할 수 없습니다. 연결을 확인하십시오."
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "대기열에 프린팅 작업이 없습니다. 작업을 추가하려면 슬라이스하여 전송하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "설치된 플러그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "인쇄 작업"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "설치된 플러그인이 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
+msgstr "총 인쇄 시간"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "설치된 재료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "대기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "설치된 재료가 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "구성 변경"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "번들 플러그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "무시하기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "번들 재료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "할당된 프린터 %1의 구성을 다음과 같이 변경해야 합니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "패키지 가져오는 중..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "프린터 %1이(가) 할당되었으나 작업에 알 수 없는 재료 구성이 포함되어 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Ultimaker Cura Enterprise용으로 검증된 플러그인 및 재료를 받으려면 로그인하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "재료 %1을(를) %2에서 %3(으)로 변경합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "시장"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "%3을(를) 재료 %1(으)로 로드합니다(이 작업은 무효화할 수 없음)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "빌드 플레이트 레벨링"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "PrintCore %1을(를) %2에서 %3(으)로 변경합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "프린팅이 잘 되도록 빌드 플레이트를 조정할 수 있습니다. '다음 위치로 이동'을 클릭하면 노즐이 조정할 수있는 다른 위치로 이동합니다."
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "빌드 플레이트를 %1(으)로 변경합니다(이 작업은 무효화할 수 없음)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "모든 자리에; 노즐 아래에 종이 한 장을 넣고 프린팅 빌드 플레이트 높이를 조정하십시오. 빌드플레이드의 높이는 종이의 끝 부분이 노즐의 끝부분으로 살짝 닿을 때의 높이입니다."
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "무시하기는 기존 프린터 구성과 함께 지정된 설정을 사용하게 됩니다. 이는 인쇄 실패로 이어질 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "빌드플레이트 레벨링 시작하기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
+msgstr "유리"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "다음 위치로 이동"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "알루미늄"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "이 Ultimaker Original에 업그레이드 할 항목을 선택하십시오"
+msgid "Unavailable printer"
+msgstr "사용할 수 없는 프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "히팅 빌드 플레이트 (공식 키트 또는 자체 조립식)"
+msgid "First available"
+msgstr "첫 번째로 사용 가능"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "대기열을 원격으로 관리하려면 프린터 펌웨어를 업데이트하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "네트워크 프린터에 연결"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "네트워크를 통해 프린터로 직접 프린팅하려면 네트워크 케이블을 사용하거나 프린터를 WIFI 네트워크에 연결하여 프린터가 네트워크에 연결되어 있는지 확인하십시오. Cura를 프린터에 연결하지 않은 경우에도 USB 드라이브를 사용하여 g-코드 파일을 프린터로 전송할 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "아래 목록에서 프린터를 선택하십시오:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "편집"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "제거"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "새로고침"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "프린터가 목록에 없으면 네트워크 프린팅 문제 해결 가이드를 읽어보십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "펌웨어 버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "주소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "이 프린터는 프린터 그룹을 호스트하도록 설정되어 있지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "이 프린터는 %1개 프린터 그룹의 호스트입니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "연결"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "잘못된 IP 주소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "유효한 IP 주소를 입력하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "프린터 주소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "네트워크에 있는 프린터의 IP 주소를 입력하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "구성 변경"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "무시하기"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "할당된 프린터 %1의 구성을 다음과 같이 변경해야 합니다:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "프린터 %1이(가) 할당되었으나 작업에 알 수 없는 재료 구성이 포함되어 있습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "재료 %1을(를) %2에서 %3(으)로 변경합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "%3을(를) 재료 %1(으)로 로드합니다(이 작업은 무효화할 수 없음)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "PrintCore %1을(를) %2에서 %3(으)로 변경합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "빌드 플레이트를 %1(으)로 변경합니다(이 작업은 무효화할 수 없음)."
+msgid "OK"
+msgstr "확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "무시하기는 기존 프린터 구성과 함께 지정된 설정을 사용하게 됩니다. 이는 인쇄 실패로 이어질 수 있습니다."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "네트워크를 통해 프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "유리"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "프린트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "알루미늄"
+msgid "Printer selection"
+msgstr "프린터 선택"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "맨 위로 이동"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "재개"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "일시 정지 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "다시 시작..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "중지"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "중지 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "중단"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1(을)를 대기열의 맨 위로 이동하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "인쇄 작업을 맨 위로 이동"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1(을)를 삭제하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "인쇄 작업 삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1(을)를 정말로 중지하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "프린팅 중단"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "중단됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "끝마친"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "준비 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "중지 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "일시 정지 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "일시 중지됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "다시 시작..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "조치가 필요함"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%2에서 %1 완료"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "프린터 관리"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "대기열을 원격으로 관리하려면 프린터 펌웨어를 업데이트하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "로딩 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "사용불가"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "연결할 수 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "대기 상태"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "프린팅"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "제목 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "익명"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "구성 변경 필요"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "세부 사항"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "사용할 수 없는 프린터"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "이 Ultimaker Original에 업그레이드 할 항목을 선택하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "첫 번째로 사용 가능"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "히팅 빌드 플레이트 (공식 키트 또는 자체 조립식)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "중단됨"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "빌드 플레이트 레벨링"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "끝마친"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "프린팅이 잘 되도록 빌드 플레이트를 조정할 수 있습니다. '다음 위치로 이동'을 클릭하면 노즐이 조정할 수있는 다른 위치로 이동합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "준비 중..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "모든 자리에; 노즐 아래에 종이 한 장을 넣고 프린팅 빌드 플레이트 높이를 조정하십시오. 빌드플레이드의 높이는 종이의 끝 부분이 노즐의 끝부분으로 살짝 닿을 때의 높이입니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "중지 중..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "빌드플레이트 레벨링 시작하기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "일시 정지 중..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "다음 위치로 이동"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "일시 중지됨"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "프로젝트 열기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "다시 시작..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "기존 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "조치가 필요함"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "새로 만들기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%2에서 %1 완료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "요약 - Cura 프로젝트"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "프린터 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "기기의 충돌을 어떻게 해결해야합니까?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "유형"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "프린터 그룹"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "프로파일 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "프로파일의 충돌을 어떻게 해결해야합니까?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "이름"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "프로파일에 없음"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 무시"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivative from"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 무시"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "재료 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "재료의 충돌은 어떻게 해결되어야합니까?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "표시 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "종류"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "표시 설정 :"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "1 out of %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "프로젝트를 로드하면 빌드 플레이트의 모든 모델이 지워집니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "열기"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "이 출력물에는 문제가있을 수 있습니다. 조정을 위한 도움말을 보려면 클릭하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"프린터에 연결이 있는지 확인하십시오.⏎- 프린터가 켜져 있는지 확인하십시오.\n"
+"- 프린터가 네트워크에 연결되어 있는지 확인하십시오.⏎- 클라우드로 연결된 프린터를 탐색할 수 있도록 로그인되어 있는지 확인하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "프린터를 네트워크에 연결하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "사용자 매뉴얼 온라인 보기"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "익명 데이터 수집에 대한 추가 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 익명 데이터를 수집합니다. 공유되는 모든 데이터의 예는 다음과 같습니다:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "익명 데이터 전송을 원하지 않습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "익명 데이터 전송 허용"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "대기 중"
+msgid "Color scheme"
+msgstr "색 구성표"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "브라우저에서 관리"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "재료 색상"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "라인 유형"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "속도"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "대기열에 프린팅 작업이 없습니다. 작업을 추가하려면 슬라이스하여 전송하십시오."
+msgid "Compatibility Mode"
+msgstr "호환 모드"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "인쇄 작업"
+msgid "Travels"
+msgstr "이동"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "총 인쇄 시간"
+msgid "Helpers"
+msgstr "도움말"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "대기"
+msgid "Shell"
+msgstr "외곽"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "네트워크를 통해 프린팅"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "내부채움"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "프린트"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "프린터 선택"
+msgid "Only Show Top Layers"
+msgstr "상단 레이어 만 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "로그인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "상단에 5 개의 세부 레이어 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "연결된 3D 프린팅의 핵심"
+msgid "Top / Bottom"
+msgstr "위 / 아래"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- 보다 많은 프린트 프로파일과 플러그인으로 자신에게 맞게 환경 조정\n"
-"- 어디서든지 유연하게 설정을 동기화하고 로딩\n"
-"- Ultimaker 프린터에서 원격 워크플로로 효율성 증대"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "내벽"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "계정 생성"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "최소"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "확인 중..."
+msgid "max"
+msgstr "최대"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "노즐 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "계정 동기화됨"
+msgid "Nozzle size"
+msgstr "노즐 크기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "오류가 발생하였습니다..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "보류된 업데이트 설치"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "호환되는 재료의 직경"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "계정 업데이트 확인"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "노즐 오프셋 X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "마지막 업데이트: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "노즐 오프셋 Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 계정"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "냉각 팬 번호"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "로그아웃"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "익스트루더 시작 Gcode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "익스트루더 종료 Gcode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "프린터 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "시간 추산 이용 불가"
+msgid "X (Width)"
+msgstr "X (너비)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "비용 추산 이용 불가"
+msgid "Y (Depth)"
+msgstr "Y (깊이)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "미리 보기"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (높이)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "시간 추산"
+msgid "Build plate shape"
+msgstr "빌드 플레이트 모양"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "재료 추산"
+msgid "Origin at center"
+msgstr "중앙이 원점"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "히트 베드"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "히팅 빌드 사이즈"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "슬라이싱..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Gcode 유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "슬라이스 할 수 없습니다"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "프린트헤드 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 최소값"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 최소값"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X 최대값"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y 최대값"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "갠트리 높이"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "익스트루더의 수"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "시작 GCode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "End GCode"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "이미지 변환 ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "\"Base\"에서 각 픽셀까지의 최대 거리."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "높이 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "밀리미터 단위의 빌드 플레이트에서 기저부 높이."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "바닥 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "빌드 플레이트의 폭 (밀리미터)."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "너비 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "빌드 플레이트의 깊이 (밀리미터)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "깊이 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "리쏘페인(투각)의 경우 들어오는 더 많은 빛을 차단하기 위해서는 다크 픽셀이 더 두꺼운 위치에 해당해야 합니다. 높이 지도의 경우 더 밝은 픽셀이 더 높은 지역을 나타냅니다. 따라서 생성된 3D 모델에서 더 밝은 픽셀이 더 두꺼운 위치에 해당해야 합니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "어두울수록 높음"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "밝을수록 높음"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "리쏘페인의 경우 반투명성을 위한 간단한 로그 모델을 사용할 수 있습니다. 높이 지도의 경우, 픽셀 값은 높이에 선형적으로 부합합니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "직선 모양"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "반투명성"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "두께가 1mm인 출력물을 관통하는 빛의 비율 이 값을 낮추면 어두운 부분의 대조가 증가하고 이미지의 밝은 부분의 대조가 감소합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm의 투과율(%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "이미지에 적용할 스무딩(smoothing)의 정도."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "스무딩(smoothing)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "내 백업"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "현재 백업이 없습니다. ‘지금 백업’ 버튼을 사용하여 생성하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "미리 보기 단계 중에는 보이는 백업 5개로 제한됩니다. 기존 백업을 보려면 백업을 제거하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura 설정을 백업, 동기화하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "처리"
+msgid "Want more?"
+msgstr "무엇을 더 하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "슬라이스"
+msgid "Backup Now"
+msgstr "지금 백업"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "슬라이싱 프로세스 시작"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "자동 백업"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura가 시작되는 날마다 자동으로 백업을 생성하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 버전"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "기기"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "재료"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "프로파일"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "플러그인"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "취소"
+msgid "Restore"
+msgstr "복원"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "온라인 문제 해결 가이드 표시"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "백업 삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "전채 화면 전환"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "이 백업을 삭제하시겠습니까? 이 작업을 완료할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "전체 화면 종료"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "백업 복원"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "되돌리기(&U)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "백업이 복원되기 전에 Cura를 다시 시작해야 합니다. 지금 Cura를 닫으시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "다시하기(&R)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 백업"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "재료"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "즐겨찾기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "일반"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "파일"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "프로젝트 저장(&S)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "내보내기(&E)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "종료(&Q)"
+msgid "Export Selection..."
+msgstr "내보내기 선택..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "최근 열어본 파일 열기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "구성 선택"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "구성"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "구성"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "사용자 정의"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "프린터"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "실행됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "재료"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "더 나은 접착력을 위해 이 재료 조합과 함께 접착제를 사용하십시오.."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1이(가) 인식되지 않기 때문에 이 구성을 사용할 수 없습니다. %2에 방문하여 올바른 재료 프로파일을 다운로드하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "시장"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "프린터에서 사용 가능한 구성 로딩 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "프린터가 연결되어 있지 않기 때문에 구성을 사용할 수 없습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "보기(&V)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "앞에서 보기"
+msgid "&Camera position"
+msgstr "카메라 위치(&C)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "위에서 보기"
+msgid "Camera view"
+msgstr "카메라 뷰"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "왼쪽에서 보기"
+msgid "Perspective"
+msgstr "원근"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "오른쪽에서 보기"
+msgid "Orthographic"
+msgstr "직교"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura 구성 ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "빌드 플레이트(&B)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "프린터 추가..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "네트워크 프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "프린터 관리 ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "로컬 프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "재료 관리..."
+msgid "Visible Settings"
+msgstr "표시 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "마켓플레이스에서 더 많은 재료 추가"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "현재 설정으로로 프로파일 업데이트"
+msgid "Collapse All Categories"
+msgstr "모든 카테고리 붕괴"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "현재 변경 사항 무시"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "보기 설정 관리..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "현재 설정으로 프로파일 생성..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "프로파일 관리..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "프린터(&P)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "온라인 문서 표시"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "재료(&M)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "버그 리포트"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "활성 익스트루더로 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "새로운 기능"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "익스트루더 사용"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "소개..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "익스트루더 사용하지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "선택한 모델 삭제"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "선택한 모델 중심에 놓기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "선택된 모델 프린팅 :"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
-msgstr[0] "선택한 모델 복제"
+msgstr[0] "선택한 모델 복"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "모델 삭제"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "복제할 수"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "플랫폼중심에 모델 위치하기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "모델 그룹화"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "사용자 정의 프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "모델 그룹 해제"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "현재 변경 사항 삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "모델 합치기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "모델 복제..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"일부 설정/대체 값은 프로파일에 저장된 값과 다릅니다.\n"
+"\n"
+"프로파일 매니저를 열려면 클릭하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "모든 모델 선택"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "유효한"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "빌드 플레이트 지우기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "비활성"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "모든 모델 다시 로드"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "실험적 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "모든 모델을 모든 빌드 플레이트에 정렬"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "추천"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "모든 모델 정렬"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "사용자 정의"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "선택한 모델 정렬"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "프린팅 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "모든 모델의 위치 재설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "인쇄 설정 비활성화됨. G 코드 파일을 수정할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "모든 모델의 변환 재설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "점진적 내부채움"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "파일 열기..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "점차적인 내부채움은 점차적으로 빈 공간 채우기의 양을 증가시킵니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "새로운 프로젝트..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "프로파일"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "설정 폴더 표시"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "일부 프로파일 설정을 수정했습니다. 이러한 설정을 변경하려면 사용자 지정 모드로 이동하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "설정 보기..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "서포트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&시장"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "오버행이 있는 모델 서포트를 생성합니다. 이러한 구조가 없으면 이러한 부분이 프린팅 중에 붕괴됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "다시 시작한 후에 이 패키지가 설치됩니다."
+msgid "Adhesion"
+msgstr "부착"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "일반"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "브림이나 라프트를 사용합니다. 이렇게하면 출력물 주변이나 아래에 평평한 영역이 추가되어 나중에 쉽게 자를 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "압출기 %2의 구성에 대한 %1 프로파일이 없습니다. 대신 기본 의도가 사용됩니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "프린터"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "프로파일"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "활성화된 프린트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 닫기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "작업 이름"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1을(를) 정말로 종료하시겠습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "프린팅 시간"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "예상 남은 시간"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "파일 열기"
+msgid "Discard or Keep changes"
+msgstr "변경 사항 삭제 또는 유지"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "패키지 설치"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"일부 프로파일 설정을 사용자 정의했습니다.\n"
+"프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n"
+"또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "파일 열기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "프로파일 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "선택한 파일 내에 하나 이상의 G-코드 파일이 있습니다. 한 번에 하나의 G-코드 파일 만 열 수 있습니다. G-코드 파일을 열려면 하나만 선택하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "현재 변경 사항"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "프린터 추가"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "항상 묻기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "새로운 기능"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "최소하고 다시 묻지않기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "계속하고 다시 묻지않기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "변경 사항 삭제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "변경 사항 유지"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "버전: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "3D 프린팅을 위한 엔드 투 엔트 솔루션."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3464,1975 +3592,2101 @@ msgstr ""
 "Cura는 커뮤니티와 공동으로 Ultimaker B.V.에 의해 개발되었습니다.\n"
 "Cura는 다음의 오픈 소스 프로젝트를 사용합니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "그래픽 사용자 인터페이스"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "애플리케이션 프레임 워크"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "GCode 생성기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "프로세스간 통신 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "프로그래밍 언어"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 프레임 워크"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 프레임 워크 바인딩"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C ++ 바인딩 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "데이터 교환 형식"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "과학 컴퓨팅을 위한 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "더 빠른 수학연산을 위한 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL 파일 처리를 위한 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "평면 개체 처리를 위한 지원 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "삼각형 메쉬 처리를 위한 지원 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MF 파일 처리를 위한 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "파일 메타데이터 및 스트리밍을 위한 지원 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "직렬 통신 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf discovery 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "다각형 클리핑 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python용 정적 유형 검사기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSL 신뢰성 검증용 루트 인증서"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 오류 추적 라이브러리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "폴리곤 패킹 라이브러리, Prusa Research 개발"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d용 Python 바인딩"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "폰트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 아이콘"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 교차 배포 응용 프로그램 배포"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "프로젝트 파일 열기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "이 파일은 Cura 프로젝트 파일입니다. 프로젝트로 열거나 모델을 가져 오시겠습니까?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "선택 기억하기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "프로젝트로 열기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "모델 가져 오기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "변경 사항 삭제 또는 유지"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"일부 프로파일 설정을 사용자 정의했습니다.\n"
-"프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n"
-"또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "프로파일 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "현재 변경 사항"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "항상 묻기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "최소하고 다시 묻지않기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "계속하고 다시 묻지않기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "변경 사항 삭제"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "변경 사항 유지"
+msgid "Open file(s)"
+msgstr "파일 열기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "선택한 파일 내에 하나 이상의 프로젝트 파일이 있습니다. 한 번에 하나의 프로젝트 파일 만 열 수 있습니다. 해당 파일에서 모델 만 가져 오기를 권장합니다. 계속 하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "모두 모델로 가져 오기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "프로젝트 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "%1익스트루더"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & 재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "재료"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "프로젝트 요약을 다시 저장하지 마십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "선택한 모델을 %1로 프린팅하십시오"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "프로젝트 파일 열기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "이 파일은 Cura 프로젝트 파일입니다. 프로젝트로 열거나 모델을 가져 오시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "선택 기억하기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "프로젝트로 열기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "모델 가져 오기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "제목 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "파일"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura에 오신 것을 환영합니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "편집(&E)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "보기(&V)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "시작하기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "비어 있음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "확장 프로그램(&X)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura를 개선하는 데 도움을 주십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "환경설정(&R)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 다음과 같은 익명 데이터를 수집합니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "도움말(&H)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "기기 유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "새 프로젝트"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "재료 사용"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "새 프로젝트를 시작 하시겠습니까? 빌드 플레이트 및 저장하지 않은 설정이 지워집니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "슬라이드 수"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "시장"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "인쇄 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "구성"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura가 수집하는 데이터에는 개인 정보가 포함되어 있지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "추가 정보"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1이(가) 인식되지 않기 때문에 이 구성을 사용할 수 없습니다. %2에 방문하여 올바른 재료 프로파일을 다운로드하십시오."
+msgid "Add printer by IP address"
+msgstr "IP 주소로 프린터 추가"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "프린터의 IP 주소를 입력하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "추가"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "시장"
+msgid "Could not connect to device."
+msgstr "장치에 연결할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "프린터에서 사용 가능한 구성 로딩 중..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimaker 프린터로 연결할 수 없습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "프린터가 연결되어 있지 않기 때문에 구성을 사용할 수 없습니다."
+msgid "The printer at this address has not responded yet."
+msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "구성 선택"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "알 수 없는 프린터이거나 그룹의 호스트가 아니기 때문에 이 프린터를 추가할 수 없습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "뒤로"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "연결"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "구성"
+msgid "Add a printer"
+msgstr "프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "사용자 정의"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "네트워크 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "프린터"
+msgid "Add a non-networked printer"
+msgstr "비 네트워크 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "실행됨"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "재료"
+msgid "Add a Cloud printer"
+msgstr "클라우드 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "더 나은 접착력을 위해 이 재료 조합과 함께 접착제를 사용하십시오.."
+msgid "Waiting for Cloud response"
+msgstr "클라우드 응답 대기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "선택된 모델 프린팅 :"
+msgid "No printers found in your account?"
+msgstr "사용자의 계정에 프린터가 없습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "선택한 모델 복"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "사용자의 계정에 있는 다음 프린터를 Cura에 추가하였습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "수동으로 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "복제할 수"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "프로젝트 저장(&S)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "내보내기(&E)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "내보내기 선택..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "재료"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "즐겨찾기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "건너뛰기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "일반"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "사용자 계약"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "네트워크 프린터"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "거절 및 닫기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "로컬 프린터"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "최근 열어본 파일 열기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "네트워크에서 검색된 프린터가 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "프린터(&P)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "새로고침"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "재료(&M)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP로 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "활성 익스트루더로 설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "클라우드 프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "익스트루더 사용"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "문제 해결"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "익스트루더 사용하지 않음"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "제조업체"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "프로파일 원작자"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "프린터 이름"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "프린터의 이름을 설정하십시오"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "마지막 업데이트: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 계정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "로그아웃"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "로그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "확인 중..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "계정 동기화됨"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "오류가 발생하였습니다..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "보류된 업데이트 설치"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "계정 업데이트 확인"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "개체 목록"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "표시 설정"
+msgid "Show Online Troubleshooting Guide"
+msgstr "온라인 문제 해결 가이드 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "모든 카테고리 붕괴"
+msgid "Toggle Full Screen"
+msgstr "전채 화면 전환"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "보기 설정 관리..."
+msgid "Exit Full Screen"
+msgstr "전체 화면 종료"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "되돌리기(&U)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "다시하기(&R)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "종료(&Q)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "카메라 위치(&C)"
+msgid "3D View"
+msgstr "3D 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "카메라 뷰"
+msgid "Front View"
+msgstr "앞에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "원근"
+msgid "Top View"
+msgstr "위에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "직교"
+msgid "Left Side View"
+msgstr "왼쪽에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "빌드 플레이트(&B)"
+msgid "Right Side View"
+msgstr "오른쪽에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "프린터에 연결되지 않음"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura 구성 ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "프린터가 명령을 받아들이지 않습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "프린터 추가..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "유지 보수 중. 프린터를 확인하십시오"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "프린터 관리 ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "프린터와의 연결이 끊어졌습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "재료 관리..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "프린팅..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "마켓플레이스에서 더 많은 재료 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "일시 중지됨"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "현재 설정으로로 프로파일 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "준비 중..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "현재 변경 사항 무시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "프린트물을 제거하십시오"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "현재 설정으로 프로파일 생성..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "프로파일 관리..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "온라인 문서 표시"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "버그 리포트"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "새로운 기능"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "소개..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "모델 삭제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "플랫폼중심에 모델 위치하기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "모델 그룹화"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "모델 그룹 해제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "모델 합치기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "모델 복제..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "모든 모델 선택"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "빌드 플레이트 지우기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "모든 모델 다시 로드"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "모든 모델을 모든 빌드 플레이트에 정렬"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "모든 모델 정렬"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "선택한 모델 정렬"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "모든 모델의 위치 재설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "모든 모델의 변환 재설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "파일 열기..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "새로운 프로젝트..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "설정 폴더 표시"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "설정 보기..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&시장"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "계산된"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "프로파일"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "현재 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "단위"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "정보"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "직경 변경 확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "새 필라멘트의 직경은 %1 mm로 설정되었으며, 현재 압출기와 호환되지 않습니다. 계속하시겠습니까?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "프린팅 중단"
+msgid "Display Name"
+msgstr "표시 이름"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "프린팅를 중단 하시겠습니까?"
+msgid "Material Type"
+msgstr "재료 유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "지원으로 프린팅됩니다."
+msgid "Color"
+msgstr "색깔"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "이 모델과 중복되는 다른 모델은 수정됩니다."
+msgid "Properties"
+msgstr "속성"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "이 모델과 중복되는 내부채움은 수정됩니다."
+msgid "Density"
+msgstr "밀도"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "이 모델과의 중복은 지원되지 않습니다."
+msgid "Diameter"
+msgstr "직경"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 설정을 덮어씁니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "필라멘트 비용"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "개체 목록"
+msgid "Filament weight"
+msgstr "필라멘트 무게"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "필라멘트 길이"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "미터 당 비용"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "이 재료는 %1에 연결되어 있으며 일부 속성을 공유합니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "재료 연결 해제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "설명"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "접착 정보"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "활성화"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "생성"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "복제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "가져오기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "내보내기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "프린터"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "제거 확인"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "%1을 제거 하시겠습니까? 이것은 취소 할 수 없습니다!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "재료 가져 오기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "재료를 가져올 수 없습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "재료를 성공적으로 가져왔습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "재료 내보내기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "재료를 내보내는데 실패했습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "재료를 성공적으로 내보냈습니다"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "프린터"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "이름 바꾸기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "프로파일"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "생성"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "복제"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "프로파일 생성하기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "이 프로파일에 대한 이름을 제공하십시오."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "프로파일 복제하기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "프로파일 이름 바꾸기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "프로파일 가져 오기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "프로파일 내보내기"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "프린터: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "현재 설정 / 재정의 프로파일 업데이트"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "이 프로파일은 프린터에서 지정한 기본값을 사용하므로 아래 목록에 아무런 설정/재정의가 없습니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "현재 설정이 선택한 프로파일과 일치합니다."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "전역 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "보기 설정"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "모두 확인"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "일반"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "인터페이스"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "통화:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "테마:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "이러한 변경 사항을 적용하려면 응용 프로그램을 다시 시작해야합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "설정이 변경되면 자동으로 슬라이싱 합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "자동으로 슬라이싱"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "뷰포트 동작"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "지원되지 않는 모델 영역을 빨간색으로 강조 표시하십시오. 서포트가 없으면 이 영역이 제대로 프린팅되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "오버행 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "경고 기호를 사용해 모델에서 누락되거나 관계 없는 표면을 강조 표시합니다. 도구 경로에서는 종종 의도한 형상의 일부가 누락됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "모델 오류 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "모델을 선택하면 모델이 뷰의 가운데에 오도록 카메라를 이동합니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "항목을 선택하면 카메라를 중앙에 위치"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "큐라의 기본 확대 동작을 반전시켜야 합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "카메라 줌의 방향을 반전시키기."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "확대가 마우스 방향으로 이동해야 합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "정투영법 시점에서는 마우스 방향으로 확대가 지원되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "마우스 방향으로 확대"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "모델을 더 이상 교차시키지 않도록 이동해야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "모델이 분리되어 있는지 확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "모델을 빌드 플레이트에 닿도록 아래로 움직여야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "모델을 빌드 플레이트에 자동으로 놓기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "g-code 리더에 주의 메시지를 표시하기."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "g-code 리더의 주의 메시지"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "레이어가 호환 모드로 강제 설정되어야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "레이어 뷰 호환성 모드로 전환 (다시 시작해야 함)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "닫힌 위치에서 Cura를 열어야 합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "시작 시 창 위치 복원"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "어떤 유형의 카메라 렌더링을 사용해야 합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "카메라 렌더링:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "원근"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "정투영"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "파일 열기 및 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "데스크톱 또는 외부 애플리케이션의 파일을 동일한 Cura 인스턴스에서 엽니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Cura의 단일 인스턴스 사용"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "크기가 너무 큰 경우 모델을 빌드 볼륨에 맞게 조정해야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "큰 모델의 사이즈 수정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "단위가 밀리미터가 아닌 미터 단위 인 경우 모델이 매우 작게 나타날 수 있습니다. 이 모델을 확대할까요?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "매우 작은 모델의 크기 조정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "모델을 로드한 후에 선택해야 합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "로드된 경우 모델 선택"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "프린터 이름에 기반한 접두어가 프린팅 작업 이름에 자동으로 추가되어야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "작업 이름에 기기 접두어 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "프로젝트 파일을 저장할 때 요약이 표시되어야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "프로젝트 저장시 요약 대화 상자 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "프로젝트 파일을 열 때 기본 동작"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "프로젝트 파일을 열 때 기본 동작 "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "항상 묻기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "항상 프로젝트로 열기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "항상 모델 가져 오기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "프로파일을 변경하고 다른 프로파일로 전환하면 수정 사항을 유지할지 여부를 묻는 대화 상자가 표시됩니다. 기본 행동을 선택하면 해당 대화 상자를 다시 표시 하지 않을 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "프로파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "다른 프로파일로 변경하는 경우 변경된 설정값에 대한 기본 동작 "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "항상 변경된 설정 삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "항상 변경된 설정을 새 프로파일로 전송"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "보안"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura가 프로그램이 시작될 때 업데이트를 확인할까요?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "시작시 업데이트 확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "프린터에 대한 익명의 데이터를 Ultimaker로 보낼까요? 모델, IP 주소 또는 기타 개인 식별 정보는 전송되거나 저장되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(익명) 프린터 정보 보내기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "추가 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "활성화"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "이름 바꾸기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "생성"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "복제"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "가져오기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "내보내기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "프린터"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "제거 확인"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "%1을 제거 하시겠습니까? 이것은 취소 할 수 없습니다!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "재료 가져 오기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "재료를 가져올 수 없습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "유형 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "재료를 성공적으로 가져왔습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "프린터에 연결되지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "재료 내보내기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "프린터가 명령을 받아들이지 않습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "재료를 내보내는데 실패했습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "유지 보수 중. 프린터를 확인하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "재료를 성공적으로 내보냈습니다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "프린터와의 연결이 끊어졌습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "정보"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "프린팅..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "직경 변경 확인"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "일시 중지됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "새 필라멘트의 직경은 %1 mm로 설정되었으며, 현재 압출기와 호환되지 않습니다. 계속하시겠습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "준비 중..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "표시 이름"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "프린트물을 제거하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "재료 유형"
+msgid "Abort Print"
+msgstr "프린팅 중단"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "색깔"
+msgid "Are you sure you want to abort the print?"
+msgstr "프린팅를 중단 하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "속성"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "검색 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "밀도"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "모든 익스트루더에 값 복사"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "직경"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "변경된 사항을 모든 익스트루더에 복사"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "필라멘트 비용"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "이 설정 숨기기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "필라멘트 무게"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "이 설정을 표시하지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "필라멘트 길이"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "이 설정을 계속 표시하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "미터 당 비용"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"일부 숨겨진 설정은 일반적인 계산 값과 다른 값을 사용합니다.\n"
+"\n"
+"이 설정을 표시하려면 클릭하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "이 재료는 %1에 연결되어 있으며 일부 속성을 공유합니다."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "영향을 미치는 모든 설정이 무효화되기 때문에 이 설정을 사용하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "재료 연결 해제"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "영향"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "설명"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "영향을 받다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "접착 정보"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "이 설정은 항상 모든 익스트루더 사이에 공유됩니다. 여기서 변경하면 모든 익스트루더에 대한 값이 변경됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "프린팅 설정"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "이 설정은 충돌하는 압출기별 값으로 결정됩니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "생성"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"이 설정에는 프로파일과 다른 값이 있습니다.\n"
+"\n"
+"프로파일 값을 복원하려면 클릭하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "복제"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "프로파일 생성하기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "이 프로파일에 대한 이름을 제공하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "프로파일 복제하기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "프로파일 이름 바꾸기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "프로파일 가져 오기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "프로파일 내보내기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "프린터: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "현재 설정 / 재정의 프로파일 업데이트"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "현재 변경 사항 삭제"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "이 프로파일은 프린터에서 지정한 기본값을 사용하므로 아래 목록에 아무런 설정/재정의가 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "현재 설정이 선택한 프로파일과 일치합니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "전역 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "계산된"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "설정"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"이 설정은 일반적으로 계산되지만 현재는 절대 값이 설정되어 있습니다.\n"
+"\n"
+"계산 된 값을 복원하려면 클릭하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "프로파일"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "현재 설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "앞에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "단위"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "위에서 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "보기 설정"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "왼쪽 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "모두 확인"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "오른쪽 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "익스트루더"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "핫 엔드의 설정 온도입니다. 핫 엔드는 이 온도를 향해 가열되거나 냉각됩니다. 이 값이 0이면 온열 가열이 꺼집니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "이 익스트루더의 현재 온도."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "노즐을 예열하기 위한 온도."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "예열"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "프린팅하기 전에 노즐을 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 노즐이 가열 될 때까지 기다릴 필요가 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "이 익스트루더의 재료 색."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "이 익스트루더의 재료."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "이 익스트루더에 삽입 된 노즐."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "빌드 플레이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "가열 된 베드의 설정 온도. 베드가 이 온도로 가열되거나 식을 것입니다. 이 값이 0이면 베드 가열이 꺼집니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "가열 된 베드의 현재 온도."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "베드를 예열하기 위한 온도."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "프린팅하기 전에 베드를 미리 가열하십시오. 가열되는 동안 계속해서 프린팅물을 조정할 수 있으며, 프린팅 준비가 되면 베드가 가열 될 때까지 기다릴 필요가 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "프린터 제어"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "조그 위치"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "조그 거리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Gcode 보내기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "연결된 프린터에 사용자 정의 G 코드 명령을 보냅니다. ‘Enter’키를 눌러 명령을 전송하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "프린터가 연결되어 있지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "클라우드 프린터가 오프라인 상태입니다. 프린터가 켜져 있고 인터넷과 연결되어 있는지 확인하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "해당 프린터가 사용자의 계정에 연결되어 있지 않습니다. Ultimaker Digital Factory에 방문하여 연결을 설정하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "현재 클라우드 연결을 사용할 수 없습니다. 클라우드 프린터에 연결하려면 로그인하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "현재 클라우드 연결을 사용할 수 없습니다. 사용자의 인터넷 연결을 확인하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "프린터 추가"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "프린터 관리"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "연결된 프린터"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "프린터 사전 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "활성화된 프린트"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "작업 이름"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "프린팅 시간"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "예상 남은 시간"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "프로파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"일부 설정/대체 값은 프로파일에 저장된 값과 다릅니다.\n"
-"\n"
-"프로파일 매니저를 열려면 클릭하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "사용자 정의 프로파일"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "압출기 %2의 구성에 대한 %1 프로파일이 없습니다. 대신 기본 의도가 사용됩니다"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "인쇄 설정 비활성화됨. G 코드 파일을 수정할 수 없습니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "추천"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "사용자 정의"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "유효한"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "비활성"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "실험적 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "부착"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "브림이나 라프트를 사용합니다. 이렇게하면 출력물 주변이나 아래에 평평한 영역이 추가되어 나중에 쉽게 자를 수 있습니다."
+msgid "Is printed as support."
+msgstr "지원으로 프린팅됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "점진적 내부채움"
+msgid "Other models overlapping with this model are modified."
+msgstr "이 모델과 중복되는 다른 모델은 수정됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "점차적인 내부채움은 점차적으로 빈 공간 채우기의 양을 증가시킵니다."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "일부 프로파일 설정을 수정했습니다. 이러한 설정을 변경하려면 사용자 지정 모드로 이동하십시오."
+msgid "Infill overlapping with this model is modified."
+msgstr "이 모델과 중복되는 내부채움은 수정됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "서포트"
+msgid "Overlaps with this model are not supported."
+msgstr "이 모델과의 중복은 지원되지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "오버행이 있는 모델 서포트를 생성합니다. 이러한 구조가 없으면 이러한 부분이 프린팅 중에 붕괴됩니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 설정을 덮어씁니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"일부 숨겨진 설정은 일반적인 계산 값과 다른 값을 사용합니다.\n"
-"\n"
-"이 설정을 표시하려면 클릭하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "시장"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "영향을 미치는 모든 설정이 무효화되기 때문에 이 설정을 사용하지 않습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "편집(&E)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "영향"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "확장 프로그램(&X)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "영향을 받다"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "환경설정(&R)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "이 설정은 항상 모든 익스트루더 사이에 공유됩니다. 여기서 변경하면 모든 익스트루더에 대한 값이 변경됩니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "도움말(&H)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "이 설정은 충돌하는 압출기별 값으로 결정됩니다:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "새 프로젝트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"이 설정에는 프로파일과 다른 값이 있습니다.\n"
-"\n"
-"프로파일 값을 복원하려면 클릭하십시오."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "새 프로젝트를 시작 하시겠습니까? 빌드 플레이트 및 저장하지 않은 설정이 지워집니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"이 설정은 일반적으로 계산되지만 현재는 절대 값이 설정되어 있습니다.\n"
-"\n"
-"계산 된 값을 복원하려면 클릭하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "검색 설정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "모든 익스트루더에 값 복사"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "변경된 사항을 모든 익스트루더에 복사"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "이 설정 숨기기"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "이 설정을 표시하지 않음"
+msgid "This package will be installed after restarting."
+msgstr "다시 시작한 후에 이 패키지가 설치됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "이 설정을 계속 표시하십시오"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 닫기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "앞에서 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1을(를) 정말로 종료하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "위에서 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "패키지 설치"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "왼쪽 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "파일 열기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "오른쪽 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "선택한 파일 내에 하나 이상의 G-코드 파일이 있습니다. 한 번에 하나의 G-코드 파일 만 열 수 있습니다. G-코드 파일을 열려면 하나만 선택하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "유형 보기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "클라우드 프린터 추가"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "새로운 기능"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "클라우드 응답 대기"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "클라우드 프린터가 오프라인 상태입니다. 프린터가 켜져 있고 인터넷과 연결되어 있는지 확인하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "사용자의 계정에 프린터가 없습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "해당 프린터가 사용자의 계정에 연결되어 있지 않습니다. Ultimaker Digital Factory에 방문하여 연결을 설정하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "사용자의 계정에 있는 다음 프린터를 Cura에 추가하였습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "현재 클라우드 연결을 사용할 수 없습니다. 클라우드 프린터에 연결하려면 로그인하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "수동으로 프린터 추가"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "현재 클라우드 연결을 사용할 수 없습니다. 사용자의 인터넷 연결을 확인하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "종료"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "제조업체"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "프로파일 원작자"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "프린터 이름"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "프린터의 이름을 설정하십시오"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "프린터 추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "네트워크 프린터 추가"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "비 네트워크 프린터 추가"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "네트워크에서 검색된 프린터가 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "프린터 관리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "새로고침"
+msgid "Connected printers"
+msgstr "연결된 프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP로 프린터 추가"
+msgid "Preset printers"
+msgstr "프린터 사전 설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "클라우드 프린터 추가"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "선택한 모델을 %1로 프린팅하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "문제 해결"
+msgid "Time estimation"
+msgstr "시간 추산"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP 주소로 프린터 추가"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "프린터의 IP 주소를 입력하십시오."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "추가"
+msgid "Material estimation"
+msgstr "재료 추산"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "장치에 연결할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimaker 프린터로 연결할 수 없습니까?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "이 주소의 프린터가 아직 응답하지 않았습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "슬라이싱..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "알 수 없는 프린터이거나 그룹의 호스트가 아니기 때문에 이 프린터를 추가할 수 없습니다."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "슬라이스 할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "뒤로"
+msgid "Processing"
+msgstr "처리"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "연결"
+msgid "Slice"
+msgstr "슬라이스"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 계정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "연결된 3D 프린팅의 핵심"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- 보다 많은 프린트 프로파일과 플러그인으로 자신에게 맞게 환경 조정"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- 어디서든지 유연하게 설정을 동기화하고 로딩"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Ultimaker 프린터에서 원격 워크플로로 효율성 증대"
+msgid "Start the slicing process"
+msgstr "슬라이싱 프로세스 시작"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "건너뛰기"
+msgid "Cancel"
+msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura를 개선하는 데 도움을 주십시오"
+msgid "No time estimation available"
+msgstr "시간 추산 이용 불가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura는 인쇄 품질과 사용자 경험을 개선하기 위해 다음과 같은 익명 데이터를 수집합니다:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "비용 추산 이용 불가"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "기기 유형"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "미리 보기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "재료 사용"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "이동식 드라이브를 제공합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "슬라이드 수"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "이동식 드라이브 출력 장치 플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "인쇄 설정"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Cura 3.5에서 Cura 4.0으로 구성을 업그레이드합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura가 수집하는 데이터에는 개인 정보가 포함되어 있지 않습니다."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "버전 업그레이드 3.5에서 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "추가 정보"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Cura 4.6.2에서 Cura 4.7로 구성을 업그레이드합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "비어 있음"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2에서 4.7로 버전 업그레이드"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "사용자 계약"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Cura 2.2에서 Cura 2.4로 구성을 업그레이드합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "거절 및 닫기"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2에서 2.4로 버전 업그레이드"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura에 오신 것을 환영합니다"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Cura 4.2에서 Cura 4.3으로 구성을 업그레이드합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr "Ultimaker Cura를 설정하려면 다음 단계를 따르십시오. 오래 걸리지 않습니다."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2에서 4.3로 버전 업그레이드"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "시작하기"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Cura 4.6.0에서 Cura 4.6.2로 구성을 업그레이드합니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura의 새로운 기능"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "4.6.0에서 4.6.2로 버전 업그레이드"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "가능한 프린팅 문제를 위해 모델 및 인쇄 구성을 확인하고 제안합니다."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Cura 3.0에서 Cura 3.1로 구성을 업그레이드합니다."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "모델 검사기"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0에서 3.1로 버전 업그레이드"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "3MF 파일 읽기 지원."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Cura 4.0에서 Cura 4.1로 구성을 업그레이드합니다."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 리더"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "버전 업그레이드 4.0에서 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "3MF 파일 작성 지원을 제공합니다."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Cura 2.6에서 Cura 2.7로 구성을 업그레이드합니다."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 기록기"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6에서 2.7으로 버전 업그레이드"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMF 파일 읽기가 지원됩니다."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Cura 2.5에서 Cura 2.6으로 구성을 업그레이드합니다."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 리더"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5에서 2.6으로 버전 업그레이드"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "구성을 백업하고 복원합니다."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Cura 4.1에서 Cura 4.2로 구성을 업그레이드합니다."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 백업"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "4.1에서 4.2로 버전 업그레이드"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngine 슬라이스 백엔드 링크를 제공합니다."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Cura 2.1에서 Cura 2.2로 구성을 업그레이드합니다."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine 백엔드"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1에서 2.2로 버전 업그레이드"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Cura 프로파일 가져 오기 지원을 제공합니다."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Cura 3.2에서 Cura 3.3으로 구성을 업그레이드합니다."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 프로파일 리더"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2에서 3.3으로 버전 업그레이드"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Cura 프로파일 내보내기 지원을 제공합니다."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Cura 4.5에서 Cura 4.6으로 구성을 업그레이드합니다."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 프로파일 작성자"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "4.5에서 4.6으로 버전 업그레이드"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "펌웨어 업데이트를 확인합니다."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Cura 4.4에서 Cura 4.5로 구성을 업그레이드합니다."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "펌웨어 업데이트 검사기"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4에서 4.5로 버전 업그레이드"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "펌웨어 업데이트를 위한 기계 동작을 제공합니다."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Cura 4.7에서 Cura 4.8로 구성을 업그레이드합니다."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "펌웨어 업데이터"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "4.7에서 4.8로 버전 업그레이드"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "압축 된 아카이브로 부터 g-code를 읽습니다."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Cura 3.3에서 Cura 3.4로 구성을 업그레이드합니다."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "압축 된 G 코드 리더기"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "버전 업그레이드 3.3에서 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "압축 된 아카이브에 g-code를 씁니다."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Cura 4.3에서 Cura 4.4로 구성을 업그레이드합니다."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "압축 된 G 코드 작성기"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3에서 4.4로 버전 업그레이드"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "G-코드 파일에서 프로파일 가져 오기를 지원합니다."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Cura 3.4에서 Cura 3.5로 구성을 업그레이드합니다."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "GCode 프로파일 리더기"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4에서 3.5로 버전 업그레이드"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-코드 파일을 로드하고 표시 할 수 있습니다."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Cura 2.7에서 Cura 3.0으로 구성을 업그레이드합니다."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-코드 리더"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7에서 3.0으로 버전 업그레이드"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G Code를 파일에 씁니다."
+msgid "Provides support for reading AMF files."
+msgstr "AMF 파일 읽기가 지원됩니다."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "GCode 작성자"
+msgid "AMF Reader"
+msgstr "AMF 리더"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2D 이미지 파일에서 프린팅 가능한 지오메트리를 생성 할 수 있습니다."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "G-코드 파일에서 프로파일 가져 오기를 지원합니다."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "이미지 리더"
+msgid "G-code Profile Reader"
+msgstr "GCode 프로파일 리더기"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "레거시 Cura 버전에서 프로파일 가져 오기를 지원합니다."
+msgid "Provides a machine actions for updating firmware."
+msgstr "펌웨어 업데이트를 위한 기계 동작을 제공합니다."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "레거시 Cura 프로파일 리더"
+msgid "Firmware Updater"
+msgstr "펌웨어 업데이터"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "기계 설정 (예 : 빌드 볼륨, 노즐 크기 등)을 변경하는 방법을 제공합니다."
+msgid "Provides support for reading X3D files."
+msgstr "X3D 파일을 읽을 수 있도록 지원합니다."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "컴퓨터 설정 작업"
+msgid "X3D Reader"
+msgstr "X3D 리더"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Cura에서 모니터 단계 제공."
+msgid "Find, manage and install new Cura packages."
+msgstr "새 Cura 패키지를 찾고, 관리하고 설치하십시오."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "모니터 단계"
+msgid "Toolbox"
+msgstr "도구 상자"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5454,75 +5708,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "후처리"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Cura에서 준비 단계 제공."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngine 슬라이스 백엔드 링크를 제공합니다."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "준비 단계"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine 백엔드"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Cura에서 미리 보기 단계를 제공합니다."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-코드를 수신하고 프린터로 보냅니다. 플러그인은 또한 펌웨어를 업데이트 할 수 있습니다."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "미리 보기 단계"
+msgid "USB printing"
+msgstr "USB 프린팅"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "이동식 드라이브를 제공합니다."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Cura 프로파일 내보내기 지원을 제공합니다."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "이동식 드라이브 출력 장치 플러그인"
+msgid "Cura Profile Writer"
+msgstr "Cura 프로파일 작성자"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "충돌을 보고하는 리포터가 사용할 수 있도록 특정 이벤트를 기록합니다"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimaker 네트워크 연결 프린터에 대한 네트워크 연결을 관리합니다."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "보초 로거"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 네트워크 연결"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "시뮬레이션 뷰를 제공합니다."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimaker 기계에 대한 기계 작동 제공(예 : 침대 수평 조정 마법사, 업그레이드 선택 등)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "시뮬레이션 뷰"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 기기 동작"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "익명의 슬라이스 정보를 제출하십시오. 환경 설정을 통해 비활성화 할 수 있습니다."
+msgid "Provides support for reading 3MF files."
+msgstr "3MF 파일 읽기 지원."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "슬라이스 정보"
+msgid "3MF Reader"
+msgstr "3MF 리더"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "일반 솔리드 메쉬보기를 제공합니다."
+msgid "Writes g-code to a compressed archive."
+msgstr "압축 된 아카이브에 g-code를 씁니다."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "솔리드 뷰"
+msgid "Compressed G-code Writer"
+msgstr "압축 된 G 코드 작성기"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "압축 된 아카이브로 부터 g-code를 읽습니다."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "압축 된 G 코드 리더기"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "가능한 프린팅 문제를 위해 모델 및 인쇄 구성을 확인하고 제안합니다."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "모델 검사기"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "펌웨어 업데이트를 확인합니다."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "펌웨어 업데이트 검사기"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "G-코드 파일을 로드하고 표시 할 수 있습니다."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-코드 리더"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5534,16 +5828,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Support Eraser"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "새 Cura 패키지를 찾고, 관리하고 설치하십시오."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "도구 상자"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5554,6 +5838,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh 리더"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "충돌을 보고하는 리포터가 사용할 수 있도록 특정 이벤트를 기록합니다"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "보초 로거"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5564,265 +5858,248 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP 리더기"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimaker 포맷 패키지 작성을 지원합니다."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 작성자"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimaker 기계에 대한 기계 작동 제공(예 : 침대 수평 조정 마법사, 업그레이드 선택 등)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "레거시 Cura 버전에서 프로파일 가져 오기를 지원합니다."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 기기 동작"
+msgid "Legacy Cura Profile Reader"
+msgstr "레거시 Cura 프로파일 리더"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimaker 네트워크 연결 프린터에 대한 네트워크 연결을 관리합니다."
+msgid "Provides a prepare stage in Cura."
+msgstr "Cura에서 준비 단계 제공."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 네트워크 연결"
+msgid "Prepare Stage"
+msgstr "준비 단계"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-코드를 수신하고 프린터로 보냅니다. 플러그인은 또한 펌웨어를 업데이트 할 수 있습니다."
+msgid "Provides a monitor stage in Cura."
+msgstr "Cura에서 모니터 단계 제공."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 프린팅"
+msgid "Monitor Stage"
+msgstr "모니터 단계"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Cura 2.1에서 Cura 2.2로 구성을 업그레이드합니다."
+msgid "Provides the X-Ray view."
+msgstr "엑스레이 뷰를 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1에서 2.2로 버전 업그레이드"
+msgid "X-Ray View"
+msgstr "엑스레이 뷰"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Cura 2.2에서 Cura 2.4로 구성을 업그레이드합니다."
+msgid "Provides support for writing 3MF files."
+msgstr "3MF 파일 작성 지원을 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2에서 2.4로 버전 업그레이드"
+msgid "3MF Writer"
+msgstr "3MF 기록기"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Cura 2.5에서 Cura 2.6으로 구성을 업그레이드합니다."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "익명의 슬라이스 정보를 제출하십시오. 환경 설정을 통해 비활성화 할 수 있습니다."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5에서 2.6으로 버전 업그레이드"
+msgid "Slice info"
+msgstr "슬라이스 정보"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Cura 2.6에서 Cura 2.7로 구성을 업그레이드합니다."
+msgid "Provides a preview stage in Cura."
+msgstr "Cura에서 미리 보기 단계를 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6에서 2.7으로 버전 업그레이드"
+msgid "Preview Stage"
+msgstr "미리 보기 단계"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Cura 2.7에서 Cura 3.0으로 구성을 업그레이드합니다."
+msgid "Provides the Simulation view."
+msgstr "시뮬레이션 뷰를 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7에서 3.0으로 버전 업그레이드"
+msgid "Simulation View"
+msgstr "시뮬레이션 뷰"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Cura 3.0에서 Cura 3.1로 구성을 업그레이드합니다."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "기계 설정 (예 : 빌드 볼륨, 노즐 크기 등)을 변경하는 방법을 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0에서 3.1로 버전 업그레이드"
+msgid "Machine Settings Action"
+msgstr "컴퓨터 설정 작업"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Cura 3.2에서 Cura 3.3으로 구성을 업그레이드합니다."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XML 기반 재료 프로파일을 읽고 쓸 수있는 기능을 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2에서 3.3으로 버전 업그레이드"
+msgid "Material Profiles"
+msgstr "재료 프로파일"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Cura 3.3에서 Cura 3.4로 구성을 업그레이드합니다."
+msgid "Provides a normal solid mesh view."
+msgstr "일반 솔리드 메쉬보기를 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "버전 업그레이드 3.3에서 3.4"
+msgid "Solid View"
+msgstr "솔리드 뷰"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Cura 3.4에서 Cura 3.5로 구성을 업그레이드합니다."
+msgid "Provides support for importing Cura profiles."
+msgstr "Cura 프로파일 가져 오기 지원을 제공합니다."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4에서 3.5로 버전 업그레이드"
+msgid "Cura Profile Reader"
+msgstr "Cura 프로파일 리더"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Cura 3.5에서 Cura 4.0으로 구성을 업그레이드합니다."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimaker 포맷 패키지 작성을 지원합니다."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "버전 업그레이드 3.5에서 4.0"
+msgid "UFP Writer"
+msgstr "UFP 작성자"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Cura 4.0에서 Cura 4.1로 구성을 업그레이드합니다."
+msgid "Writes g-code to a file."
+msgstr "G Code를 파일에 씁니다."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "버전 업그레이드 4.0에서 4.1"
+msgid "G-code Writer"
+msgstr "GCode 작성자"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Cura 4.1에서 Cura 4.2로 구성을 업그레이드합니다."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2D 이미지 파일에서 프린팅 가능한 지오메트리를 생성 할 수 있습니다."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "4.1에서 4.2로 버전 업그레이드"
+msgid "Image Reader"
+msgstr "이미지 리더"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Cura 4.2에서 Cura 4.3으로 구성을 업그레이드합니다."
+msgid "Backup and restore your configuration."
+msgstr "구성을 백업하고 복원합니다."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2에서 4.3로 버전 업그레이드"
+msgid "Cura Backups"
+msgstr "Cura 백업"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Cura 4.3에서 Cura 4.4로 구성을 업그레이드합니다."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "전체 스택이 누락되었습니다."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3에서 4.4로 버전 업그레이드"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "매니폴드 모델이 아닙니다. 강조 표시된 영역은 누락되거나 관련 없는 표면을 표시합니다."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Cura 4.4에서 Cura 4.5로 구성을 업그레이드합니다."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "모델 오류"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4에서 4.5로 버전 업그레이드"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "레이어 두께"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Cura 4.5에서 Cura 4.6으로 구성을 업그레이드합니다."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "연결된 3D 프린팅의 핵심"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "4.5에서 4.6으로 버전 업그레이드"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- 보다 많은 프린트 프로파일과 플러그인으로 자신에게 맞게 환경 조정\n"
+#~ "- 어디서든지 유연하게 설정을 동기화하고 로딩\n"
+#~ "- Ultimaker 프린터에서 원격 워크플로로 효율성 증대"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Cura 4.6.0에서 Cura 4.6.2로 구성을 업그레이드합니다."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "계정 생성"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "4.6.0에서 4.6.2로 버전 업그레이드"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "선택한 모델 삭제"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Cura 4.6.2에서 Cura 4.7로 구성을 업그레이드합니다."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "선택한 모델 중심에 놓기"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2에서 4.7로 버전 업그레이드"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "선택한 모델 복제"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Cura 4.7에서 Cura 4.8로 구성을 업그레이드합니다."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "종료"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "4.7에서 4.8로 버전 업그레이드"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker 계정"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3D 파일을 읽을 수 있도록 지원합니다."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "연결된 3D 프린팅의 핵심"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 리더"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- 보다 많은 프린트 프로파일과 플러그인으로 자신에게 맞게 환경 조정"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XML 기반 재료 프로파일을 읽고 쓸 수있는 기능을 제공합니다."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- 어디서든지 유연하게 설정을 동기화하고 로딩"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "재료 프로파일"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Ultimaker 프린터에서 원격 워크플로로 효율성 증대"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "엑스레이 뷰를 제공합니다."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr "Ultimaker Cura를 설정하려면 다음 단계를 따르십시오. 오래 걸리지 않습니다."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "엑스레이 뷰"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Ultimaker Cura의 새로운 기능"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/ko_KR/fdmextruder.def.json.po b/resources/i18n/ko_KR/fdmextruder.def.json.po
index 998fdb283d..b53db9c1ab 100644
--- a/resources/i18n/ko_KR/fdmextruder.def.json.po
+++ b/resources/i18n/ko_KR/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Korean <info@bothof.nl>\n"
 "Language-Team: Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
diff --git a/resources/i18n/ko_KR/fdmprinter.def.json.po b/resources/i18n/ko_KR/fdmprinter.def.json.po
index 98f6f04593..926eaebb1a 100644
--- a/resources/i18n/ko_KR/fdmprinter.def.json.po
+++ b/resources/i18n/ko_KR/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "압출기가 자체 히터를 가지고 있지 않고 단일 히터를 공유하는지에 대한 여부."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "허용되지 않는 지역"
@@ -487,8 +507,8 @@ msgstr "익스트루더로 오프셋"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "익스트루더 오프셋을 좌표계에 적용하십시오."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "첫 번째 레이어의 라인 폭 승수입니다. 이것을 늘리면
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "외곽"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Z 층의 경계면을 더 잘 가리기 위해 바깥쪽 벽 뒤에 삽입되어 이동한 거리."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "상단 표면 익스트루더"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "익스트루더는 최상층을 프린팅하는 데 사용됩니다. 이것은 다중 압출에 사용됩니다."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "상단 표면 스킨 레이어"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "최상층의 스킨 층의 수. 일반적으로 고품질의 표면을 생성하기 위해 맨위의 레이어 하나만 있으면 충분합니다."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "상단/하단 익스트루더"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "상단 및 하단 스킨 프린팅에 사용되는 익스트루더. 이것은 다중 압출에 사용됩니다."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "상단/하단 두께"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "출력물의 상단/하단 레이어의 두께. 이 값을 레이어 높이로 나눈 값은 위쪽/아래쪽 레이어의 수 입니다."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "상단 두께"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "출력물의 상단 레이어의 두께. 이 값을 레이어 높이로 나눈 값이 최상위 레이어 수 입니다."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "상단 레이어"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "출력물의 상단 레이어의 수. 상단 두깨로 계산을 할때 이 값은 벽 두께로 계산할 때 이 값은 반올림됩니다."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "바닥 두께"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "출력물의 아래쪽 레이어의 두께. 이 값을 레이어 높이로 나눈 값은 맨 아래 레이어의 수 입니다."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "하단 레이어"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "아래층의 수. 바닥 두께로 계산을 할때 이 값은 벽 두께로 계산할 때 이 값은 반올림됩니다."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "초기 하단 레이어"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "빌드 플레이트에서 위를 향하는 초기 하단 레이어 수. 하단 두께로 계산할 경우, 이 값이 전체 값으로 반올림됩니다."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "상단/하단 패턴"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "상단/하단 레이어의 패턴."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "라인"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "동심원 형태"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "지그재그"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "하단 패턴 초기 레이어"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "첫 번째 레이어의 프린팅 아래쪽에 있는 패턴입니다."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "윤곽"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "동심원의"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "지그재그"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "상단/하단 다각형 연결"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "스킨 경로가 나란히 이어지는 상단/하단 스킨 경로를 연결합니다. 동심원 패턴의 경우 이 설정을 사용하면 이동 시간이 크게 감소하지만, 내부채움의 중간에 연결될 수 있기 때문에 이 기능은 상단 표면 품질을 저하시킬 수 있습니다."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "상단/하단 라인 길 방향"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "상단/하단 레이어가 선 또는 지그재그 패턴을 사용할 때 사용할 방향 리스트입니다. 리스트의 요소는 레이어가 진행됨에 따라 순차적으로 사용되며 리스트의 끝에 도달하면 처음부터 다시 시작됩니다. 리스트 항목은 쉼표로 구분되며 전체 리스트는 대괄호 안에 들어 있습니다. 기본값은 빈 목록이고, 기본 각도(45도 및 135도)를 사용합니다."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "외벽 삽입"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "활성화 된 경우 z 솔기 좌표는 각 부품의 중심을 기준으로합니다. 비활성화 된 경우 좌표는 빌드 플레이트의 절대 위치를 정의합니다."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "상단 표면 익스트루더"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "익스트루더는 최상층을 프린팅하는 데 사용됩니다. 이것은 다중 압출에 사용됩니다."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "상단 표면 스킨 레이어"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "최상층의 스킨 층의 수. 일반적으로 고품질의 표면을 생성하기 위해 맨위의 레이어 하나만 있으면 충분합니다."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "상단/하단 익스트루더"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "상단 및 하단 스킨 프린팅에 사용되는 익스트루더. 이것은 다중 압출에 사용됩니다."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "상단/하단 두께"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "출력물의 상단/하단 레이어의 두께. 이 값을 레이어 높이로 나눈 값은 위쪽/아래쪽 레이어의 수 입니다."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "상단 두께"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "출력물의 상단 레이어의 두께. 이 값을 레이어 높이로 나눈 값이 최상위 레이어 수 입니다."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "상단 레이어"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "출력물의 상단 레이어의 수. 상단 두깨로 계산을 할때 이 값은 벽 두께로 계산할 때 이 값은 반올림됩니다."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "바닥 두께"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "출력물의 아래쪽 레이어의 두께. 이 값을 레이어 높이로 나눈 값은 맨 아래 레이어의 수 입니다."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "하단 레이어"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "아래층의 수. 바닥 두께로 계산을 할때 이 값은 벽 두께로 계산할 때 이 값은 반올림됩니다."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "초기 하단 레이어"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "빌드 플레이트에서 위를 향하는 초기 하단 레이어 수. 하단 두께로 계산할 경우, 이 값이 전체 값으로 반올림됩니다."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "상단/하단 패턴"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "상단/하단 레이어의 패턴."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "라인"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "동심원 형태"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "지그재그"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "하단 패턴 초기 레이어"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "첫 번째 레이어의 프린팅 아래쪽에 있는 패턴입니다."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "윤곽"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "동심원의"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "지그재그"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "상단/하단 다각형 연결"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "스킨 경로가 나란히 이어지는 상단/하단 스킨 경로를 연결합니다. 동심원 패턴의 경우 이 설정을 사용하면 이동 시간이 크게 감소하지만, 내부채움의 중간에 연결될 수 있기 때문에 이 기능은 상단 표면 품질을 저하시킬 수 있습니다."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "상단/하단 라인 길 방향"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "상단/하단 레이어가 선 또는 지그재그 패턴을 사용할 때 사용할 방향 리스트입니다. 리스트의 요소는 레이어가 진행됨에 따라 순차적으로 사용되며 리스트의 끝에 도달하면 처음부터 다시 시작됩니다. 리스트 항목은 쉼표로 구분되며 전체 리스트는 대괄호 안에 들어 있습니다. 기본값은 빈 목록이고, 기본 각도(45도 및 135도)를 사용합니다."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Z 간격에 스킨 없음"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "벽과 스킨-센터라인(종점) 사이의 겹침 양을 조정하십시오. 약간의 겹침으로 벽이 스킨에 확실하게 연결될 수 있습니다. 동일한 스킨 및 벽 라인-폭을 고려할 때 값이 벽 폭의 절반을 넘는다면, 그 지점에서 스킨-익스트루더의 노즐 위치가 이미 벽 중앙을 지나 도달할 수 있기 때문에 이미 스킨이 벽을 지나치고 있을 수 있습니다."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "스킨 제거 폭"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "제거 할 외부스킨 영역의 가장 큰 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게하면 모델의 경사면에서 위쪽 / 아래쪽 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이 됩니다."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "상단 스킨 제거 폭"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "제거 할 상단 스킨 영역의 가장 큰 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게 하면 모델의 경사면에서 상단 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이됩니다."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "밑면 스킨 제거 폭"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "제거 할 바닥 스킨 영역의 최대 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게하면 모델의 경사면에서 밑면 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이됩니다."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "스킨 확장 거리"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "스킨이 내부채움으로 확장되는 거리입니다. 값이 높을수록 스킨이 내부채움 패턴에 더 잘 부착되고 인접 레이어의 벽이 스킨에 잘 밀착됩니다. 값이 낮을수록 사용 될 재료의 양이 절약됩니다."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "윗면 스킨 확장 거리"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "상단 스킨의 거리가 내부채움으로 확장됩니다. 값이 높을수록 스킨이 내부채움 패턴에 더 잘 부착되며 위 레이어의 벽이 스킨에 잘 밀착됩니다. 값이 낮을수록 사용 된 재료의 양이 절약됩니다."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "밑면 스킨 확장 거리"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "바닥 스킨의 거리가 내부채움으로 확장됩니다. 값이 높을수록 스킨가 내부채움 패턴에 더 잘 붙어 스킨가 아래 층의 벽에 잘 밀착됩니다. 값이 낮을수록 사용 된 재료의 양이 절약됩니다."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "확장을 위한 최대 스킨 각"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "확장을 위한 최소 스킨 폭"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "이보다 좁은 스킨 영역은 확장되지 않습니다. 이렇게하면 모델 표면이 수직에 가까운 기울기를 가질 때 생성되는 좁은 스킨 영역을 확장하지 않아도됩니다."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "내부채움"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "충진물이 추가되는 내부 오버행의 최소 각도. 0°에서는 개체가 충진물로 완전히 채워지지만, 90°에서는 충진물이 공급되지 않습니다."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "스킨 제거 폭"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "제거 할 외부스킨 영역의 가장 큰 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게하면 모델의 경사면에서 위쪽 / 아래쪽 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이 됩니다."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "상단 스킨 제거 폭"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "제거 할 상단 스킨 영역의 가장 큰 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게 하면 모델의 경사면에서 상단 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이됩니다."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "밑면 스킨 제거 폭"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "제거 할 바닥 스킨 영역의 최대 너비. 이 값보다 작은 모든 스킨 영역은 사라집니다. 이렇게하면 모델의 경사면에서 밑면 스킨을 프린팅하는 데 소요되는 시간과 재료의 양을 제한하는 데 도움이됩니다."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "스킨 확장 거리"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "스킨이 내부채움으로 확장되는 거리입니다. 값이 높을수록 스킨이 내부채움 패턴에 더 잘 부착되고 인접 레이어의 벽이 스킨에 잘 밀착됩니다. 값이 낮을수록 사용 될 재료의 양이 절약됩니다."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "윗면 스킨 확장 거리"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "상단 스킨의 거리가 내부채움으로 확장됩니다. 값이 높을수록 스킨이 내부채움 패턴에 더 잘 부착되며 위 레이어의 벽이 스킨에 잘 밀착됩니다. 값이 낮을수록 사용 된 재료의 양이 절약됩니다."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "밑면 스킨 확장 거리"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "바닥 스킨의 거리가 내부채움으로 확장됩니다. 값이 높을수록 스킨가 내부채움 패턴에 더 잘 붙어 스킨가 아래 층의 벽에 잘 밀착됩니다. 값이 낮을수록 사용 된 재료의 양이 절약됩니다."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "확장을 위한 최대 스킨 각"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "이 설정보다 큰 각도로 객체의 상단 및 또는 하단 표면은 위쪽/아래쪽 스킨이 확장되지 않습니다. 이렇게하면 모델 표면이 수직 경사가 거의 없을 때 생성되는 좁은 스킨 영역을 확장하지 않아도됩니다. 0도의 각도는 수평이며, 90도의 각도는 수직입니다."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "확장을 위한 최소 스킨 폭"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "이보다 좁은 스킨 영역은 확장되지 않습니다. 이렇게하면 모델 표면이 수직에 가까운 기울기를 가질 때 생성되는 좁은 스킨 영역을 확장하지 않아도됩니다."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "스킨 에지의 두께 지원"
@@ -2561,8 +2591,8 @@ msgstr "초기 레이어 속도"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "초기 레이어의 속도입니다. 빌드 플레이트에 대한 접착력을 향상 시키려면 낮은 값을 권합니다."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,8 +5105,8 @@ msgstr "메쉬 처리 랭크"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "여러 오버랩 메쉬 내부채움을 고려할 때 메쉬의 우선 순위를 결정합니다. 여러 메쉬 내부채움이 오버랩하는 영역은 최저 랭크의 메쉬 설정에 착수하게 됩니다. 우선 순위가 높은 내부채움 메쉬는 우선 순위가 낮은 내부채움 메쉬와 표준 메쉬의 내부채움을 수정합니다."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "프린팅 가능하게 된 후 오버행의 최대 각도. 0도의 값에서 모든 오버행은 빌드 플레이트에 연결된 모델로 대체됩니다. 90도는 모델을 변경하지 않습니다."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "코스팅(Coasting) 사용"
@@ -6360,6 +6400,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "파일로부터 로드 하는 경유, 모델에 적용될 변환 행렬입니다."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "익스트루더 오프셋을 좌표계에 적용하십시오."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "외곽"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "이 설정보다 큰 각도로 객체의 상단 및 또는 하단 표면은 위쪽/아래쪽 스킨이 확장되지 않습니다. 이렇게하면 모델 표면이 수직 경사가 거의 없을 때 생성되는 좁은 스킨 영역을 확장하지 않아도됩니다. 0도의 각도는 수평이며, 90도의 각도는 수직입니다."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "초기 레이어의 속도입니다. 빌드 플레이트에 대한 접착력을 향상 시키려면 낮은 값을 권합니다."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "여러 오버랩 메쉬 내부채움을 고려할 때 메쉬의 우선 순위를 결정합니다. 여러 메쉬 내부채움이 오버랩하는 영역은 최저 랭크의 메쉬 설정에 착수하게 됩니다. 우선 순위가 높은 내부채움 메쉬는 우선 순위가 낮은 내부채움 메쉬와 표준 메쉬의 내부채움을 수정합니다."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "플레이트를 가열하기 위해 사용되는 온도. 이것이 0이면, 베드 온도가 조정되지 않습니다."
diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po
index d74aef776a..0c292f2dd4 100644
--- a/resources/i18n/nl_NL/cura.po
+++ b/resources/i18n/nl_NL/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:10+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Onbekend"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Machines laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Voorkeuren instellen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Beschikbare netwerkprinters"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Actieve machine initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Niet overschreven"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Machinebeheer initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Werkvolume initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Scene instellen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visueel"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interface laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Engine initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ontwerp"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Waarschuwing"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Fout"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Aangepast materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Onbekend"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Aangepaste profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Alle Ondersteunde Typen ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Alle Bestanden (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Inloggen mislukt"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Nieuwe locatie vinden voor objecten"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Locatie vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visueel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Kan locatie niet vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Back-up"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Ontwerp"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Beschikbare netwerkprinters"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Werkvolume"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Niet overschreven"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura kan niet worden gestart"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Stuur ons dit crashrapport om het probleem op te lossen.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Het crashrapport naar Ultimaker verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Gedetailleerd crashrapport weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Open Configuratiemap"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Back-up maken en herstellen van configuratie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Crashrapport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1078 +249,780 @@ msgstr ""
 "            <p>Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Systeeminformatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Onbekend"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura-versie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Taal van Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Taal van besturingssysteem"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Nog niet geïnitialiseerd<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL-versie: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL-leverancier: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL-renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Traceback van fout"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Logboeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Rapport verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Machines laden..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Voorkeuren instellen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Actieve machine initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Machinebeheer initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Werkvolume initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Scene instellen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interface laden..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Engine initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Fout"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Objecten verveelvoudigen en plaatsen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Objecten plaatsen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Object plaatsen"
+msgid "Login failed"
+msgstr "Inloggen mislukt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Kan het antwoord niet lezen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Kan de Ultimaker-accountserver niet bereiken."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "De opgegeven status is niet juist."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Kan de Ultimaker-accountserver niet bereiken."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Het Bestand Bestaat Al"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Het bestand <filename>{0}</filename> bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Ongeldige bestands-URL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozzle"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "De instellingen zijn bijgewerkt"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(s) uitgeschakeld"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: Invoegtoepassing voor de schrijver heeft een fout gerapporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Het profiel is geëxporteerd als <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "De export is voltooid"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename> voordat een printer toegevoegd is."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Er is geen aangepast profiel om in het bestand <filename>{0}</filename> te importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Dit profiel <filename>{0}</filename> bevat incorrecte gegevens. Kan het profiel niet importeren."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Het profiel {0} is geïmporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Het bestand {0} bevat geen geldig profiel."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Aangepast profiel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Er ontbreekt een kwaliteitstype in het profiel."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Algemene stapel ontbreekt."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Kan het profiel niet toevoegen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Niet ondersteund"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozzle"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Nieuwe locatie vinden voor objecten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "De instellingen zijn bijgewerkt"
+msgid "Finding Location"
+msgstr "Locatie vinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(s) uitgeschakeld"
+msgid "Can't Find Location"
+msgstr "Kan locatie niet vinden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Groepsnummer {group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Toevoegen"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Voltooien"
+msgid "Close"
+msgstr "Sluiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuleren"
+msgid "Next"
+msgstr "Volgende"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groepsnummer {group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Voltooien"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Buitenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Binnenwanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Skin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Supportvulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Verbindingsstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Primepijler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Beweging"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Intrekkingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Overig(e)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Volgende"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Sluiten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-modelassistent"
+msgid "Cancel"
+msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
-"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projectbestand Openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Kan projectbestand niet openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF-schrijverplug-in is beschadigd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Fout bij het schrijven van het 3mf-bestand."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura-project 3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF-bestand"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Back-ups"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Uw back-up maken..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Er is een fout opgetreden bij het maken van de back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Uw back-up wordt geüpload..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Uw back-up is geüpload."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "De back-up is groter dan de maximale bestandsgrootte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Back-ups beheren"
+msgid "Build Volume"
+msgstr "Werkvolume"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
+msgid "Backup"
+msgstr "Back-up"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
-"- binnen het werkvolume passen\n"
-"- zijn toegewezen aan een ingeschakelde extruder\n"
-"- niet allemaal zijn ingesteld als modificatierasters"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Lagen verwerken"
+msgid "Multiplying and placing objects"
+msgstr "Objecten verveelvoudigen en plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informatie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-profiel"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Geen toegang tot update-informatie."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Er zijn mogelijk nieuwe functies of bugfixes beschikbaar voor uw {machine_name}. Als u nog niet over de nieuwste versie beschikt, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nieuwe firmware voor %s beschikbaar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Instructies voor bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Gecomprimeerd G-code-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-code parseren"
+msgid "Placing Objects"
+msgstr "Objecten plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Details van de G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Bereid voorafgaand aan het exporteren G-code voor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04-profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Machine-instellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Controleren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Instellingen per Model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Instellingen per Model configureren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Nabewerking"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-code wijzigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Voorbereiden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Voorbeeld"
+msgid "Placing Object"
+msgstr "Object plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Opslaan op verwisselbaar station"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Opslaan op Verwisselbaar Station {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Opslaan op Verwisselbaar Station <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Kan niet opslaan als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Bestand opgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Uitwerpen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Verwisselbaar station {0} uitwerpen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardware veilig verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Uitwerpen van {0} is niet gelukt. Mogelijk wordt het station door een ander programma gebruikt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Verwisselbaar Station"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Geen lagen om weer te geven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Dit bericht niet meer weergeven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Laagweergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Uw model is niet veelvoudig. De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Modelfouten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Solide weergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Supportblokkering"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Maak een volume waarin supportstructuren niet worden geprint."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
+msgid "AMF File"
+msgstr "AMF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniseren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchroniseren ..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Nee, ik ga niet akkoord"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Akkoord"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Licentieovereenkomst invoegtoepassing"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Weigeren en verwijderen uit account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} plug-ins zijn niet gedownload"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchroniseren ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} plug-ins zijn niet gedownload"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Gecomprimeerde driehoeksnet openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchroniseren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Instellingen per Model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF-binair"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Instellingen per Model configureren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF-ingesloten JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford-driehoeksformaat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-code wijzigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Kan niet naar UFP-bestand schrijven:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Platform kalibreren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Upgrades selecteren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
+"- binnen het werkvolume passen\n"
+"- zijn toegewezen aan een ingeschakelde extruder\n"
+"- niet allemaal zijn ingesteld als modificatierasters"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Verbonden via Cloud"
+msgid "Processing Layers"
+msgstr "Lagen verwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Printen via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Via USB Printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Aangesloten via USB"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Bezig met printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Verbinding Maken via Netwerk"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nieuwe printer gedetecteerd van uw Ultimaker-account"
 msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Printer {name} ({model}) toevoegen vanaf uw account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1295,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... en {0} andere"
 msgstr[1] "... en {0} andere"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Printers toegevoegd vanuit Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Een cloudverbinding is niet beschikbaar voor een printer"
 msgstr[1] "Een cloudverbinding is niet beschikbaar voor meerdere printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:"
 msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Ga naar {website_link} om een verbinding tot stand te brengen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Printerconfiguraties behouden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Printers verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Printers verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1374,7 +1110,7 @@ msgstr[1] ""
 "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1383,2090 +1119,2487 @@ msgstr ""
 "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Verzend en controleer overal printtaken met uw Ultimaker-account."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Verbinden met Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Aan de slag"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Verbonden via Cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
+msgid "tomorrow"
+msgstr "morgen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Uw printer bijwerken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "vandaag"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
+msgid "Sending Print Job"
+msgstr "Printtaak verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "De materialen worden naar de printer verzonden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Printtaak naar printer aan het uploaden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Geen groephost"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Groep configureren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Verzend en controleer overal printtaken met uw Ultimaker-account."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Verbinden met Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Aan de slag"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Wacht tot de huidige taak is verzonden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Printfout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Kan de gegevens niet uploaden naar de printer."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Netwerkfout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Printtaak verzenden"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Printtaak naar printer aan het uploaden."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "De materialen worden naar de printer verzonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Wachtrij vol"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "De printtaak is naar de printer verzonden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Gegevens verzonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Uw printer bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Via het netwerk verbonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Verbinding Maken via Netwerk"
+msgid "Select upgrades"
+msgstr "Upgrades selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "morgen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Platform kalibreren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "vandaag"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Aanbevolen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Printen via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Via USB Printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projectbestand Openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Aangesloten via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Kan projectbestand niet openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Bezig met printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-bestand"
+msgid "3MF File"
+msgstr "3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgenweergave"
+msgid "Compressed G-code File"
+msgstr "Gecomprimeerd G-code-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Project openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-modelassistent"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Bestaand(e) bijwerken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
+"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Nieuw maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Geen toegang tot update-informatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Samenvatting - Cura-project"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Er zijn mogelijk nieuwe functies of bugfixes beschikbaar voor uw {machine_name}. Als u nog niet over de nieuwste versie beschikt, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Printerinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nieuwe firmware voor %s beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hoe dient het conflict in de machine te worden opgelost?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Instructies voor bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Printergroep"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-code parseren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profielinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Details van de G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Supportblokkering"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Maak een volume waarin supportstructuren niet worden geprint."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Naam"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Gecomprimeerde driehoeksnet openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Niet in profiel"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF-binair"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 overschrijving"
-msgstr[1] "%1 overschrijvingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF-ingesloten JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Afgeleide van"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford-driehoeksformaat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 overschrijving"
-msgstr[1] "%1, %2 overschrijvingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materiaalinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04-profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Zichtbaarheid instellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Voorbereiden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Controleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Zichtbare instellingen:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgenweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 van %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Fout bij het schrijven van het 3mf-bestand."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura-project 3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Wilt u meer?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF-schrijverplug-in is beschadigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Nu back-up maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Auto back-up"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Voorbeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Laagweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Back-up verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Back-up herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Geen lagen om weer te geven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura-versie"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Dit bericht niet meer weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Machine-instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materialen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Solide weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profielen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Invoegtoepassingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mijn back-ups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Kan niet naar UFP-bestand schrijven:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Bereid voorafgaand aan het exporteren G-code voor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-afbeelding"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Uw back-up maken..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Er is een fout opgetreden bij het maken van de back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Uw back-up wordt geüpload..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Uw back-up is geüpload."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "De back-up is groter dan de maximale bestandsgrootte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Back-ups beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Firmware-upgrade Automatisch Uitvoeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Aangepaste Firmware Uploaden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Aangepaste firmware selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware-update"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "De firmware wordt bijgewerkt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "De firmware-update is voltooid."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Firmware-update mislukt door een onbekende fout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Firmware-update mislukt door een communicatiefout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Firmware-update mislukt door een invoer-/uitvoerfout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Firmware-update mislukt door ontbrekende firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Afbeelding Converteren..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marktplaats"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "U moet de licentie accepteren om de package te installeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hoogte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Wijzigingen van uw account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "De basishoogte van het platform in millimeters."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Basis (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Volgende"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "De breedte op het platform in millimeters."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "De volgende packages worden toegevoegd:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Breedte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "De diepte op het platform in millimeters"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "De-installeren bevestigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Diepte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Donkerder is hoger"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Lichter is hoger"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Bevestigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineair"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Community-bijdragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Doorschijnendheid"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Community-invoegtoepassingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Standaard materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmissie 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "De mate van effening die op de afbeelding moet worden toegepast."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Laatst bijgewerkt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Effenen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Merk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Downloads"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Printer"
+msgid "Installed plugins"
+msgstr "Geïnstalleerde plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nozzle-instellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Er zijn geen plug-ins geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Maat nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Geïnstalleerde materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Er zijn materialen geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Compatibele materiaaldiameter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Gebundelde plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Nozzle-offset X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Gebundelde materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Nozzle-offset Y"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Nummer van koelventilator"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Start-G-code van extruder"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Eind-G-code van extruder"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Printerinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Packages ophalen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Breedte)"
+msgid "Compatibility"
+msgstr "Compatibiliteit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Diepte)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hoogte)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Vorm van het platform"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Centraal oorsprongpunt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Kwaliteit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Verwarmd bed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Technisch informatieblad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Verwarmde werkvolume"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Veiligheidsinformatieblad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Versie G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Richtlijnen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Printkopinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Invoegtoepassingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Geïnstalleerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Ga naar Marketplace op internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Rijbrughoogte"
+msgid "Will install upon restarting"
+msgstr "Wordt geïnstalleerd na opnieuw starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Aantal extruders"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Eind G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Bijgewerkt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Controleer of de printer verbonden is:\n"
-"- Controleer of de printer ingeschakeld is.\n"
-"- Controleer of de printer verbonden is met het netwerk.\n"
-"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgraden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "De-installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Geïnstalleerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Materialen zoeken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Verbind uw printer met het netwerk."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Gebruikershandleidingen online weergegeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sluit %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Terug"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Rastertype"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Normaal model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Printen als supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Instellingen aanpassen voor overlapping"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Supportstructuur niet laten overlappen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Alleen vulraster"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Snijdend raster"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Instellingen selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Instellingen Selecteren om Dit Model Aan te Passen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filteren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Alles weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Invoegtoepassing voor Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts voor Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Een script toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Actieve scripts voor nabewerking wijzigen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Het volgende script is actief:"
 msgstr[1] "De volgende scripts zijn actief:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Kleurenschema"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materiaalkleur"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Lijntype"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Snelheid"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Laagdikte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Compatibiliteitsmodus"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Bewegingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Helpers"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Shell"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Vulling"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Alleen bovenlagen weergegeven"
+msgid "Queued"
+msgstr "In wachtrij"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 gedetailleerde lagen bovenaan weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Beheren in browser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Boven-/onderkant"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Binnenwand"
+msgid "Print jobs"
+msgstr "Printtaken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Totale printtijd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "Wachten op"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Meer informatie over anonieme gegevensverzameling"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Ik wil geen anonieme gegevens verzenden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Verzenden van anonieme gegevens toestaan"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Terug"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibiliteit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Platform"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Supportstructuur"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kwaliteit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technisch informatieblad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Veiligheidsinformatieblad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Richtlijnen voor printen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Website"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Geïnstalleerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Bijgewerkt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ga naar Marketplace op internet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Materialen zoeken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sluit %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Invoegtoepassingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Geïnstalleerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Wordt geïnstalleerd na opnieuw starten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgraden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "De-installeren"
+msgid "Configuration Changes"
+msgstr "Configuratiewijzigingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Wijzigingen van uw account"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Volgende"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "De volgende packages worden toegevoegd:"
+msgid "Override"
+msgstr "Overschrijven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "De-installeren bevestigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Bevestigen"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:"
+msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "U moet de licentie accepteren om de package te installeren"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Website"
+msgid "Change material %1 from %2 to %3."
+msgstr "Wijzig het materiaal %1 van %2 in %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versie"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Wijzig de print core %1 van %2 in %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Laatst bijgewerkt"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Merk"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+msgid "Glass"
+msgstr "Glas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Community-bijdragen"
+msgid "Aluminum"
+msgstr "Aluminium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Community-invoegtoepassingen"
+msgid "Unavailable printer"
+msgstr "Niet‑beschikbare printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Standaard materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Geïnstalleerde plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Er zijn geen plug-ins geïnstalleerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Geïnstalleerde materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Er zijn materialen geïnstalleerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Gebundelde plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Gebundelde materialen"
+msgid "First available"
+msgstr "Eerst beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Packages ophalen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marktplaats"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Platform Kalibreren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Kalibratie Platform Starten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Beweeg Naar de Volgende Positie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Verbinding Maken met Printer in het Netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecteer uw printer in de onderstaande lijst:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Vernieuwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Raadpleeg de <a href='%1'>handleiding voor probleemoplossing bij printen via het netwerk</a> als uw printer niet in de lijst wordt vermeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmwareversie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Deze printer is niet ingesteld voor het hosten van een groep printers."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Deze printer is de host voor een groep van %1 printers."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Verbinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ongeldig IP-adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Voer een geldig IP-adres in."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Printeradres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Voer het IP-adres van uw printer in het netwerk in."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Configuratiewijzigingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Overschrijven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:"
-msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Wijzig het materiaal %1 van %2 in %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Wijzig de print core %1 van %2 in %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Glas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminium"
+msgid "Printer selection"
+msgstr "Printerselectie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Plaats bovenaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Hervatten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pauzeren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Hervatten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pauzeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Afbreken..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Weet u zeker dat u %1 bovenaan de wachtrij wilt plaatsen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Plaats printtaak bovenaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Weet u zeker dat u %1 wilt verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Printtaak verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Weet u zeker dat u %1 wilt afbreken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Printen afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Afgebroken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Gereed"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Voorbereiden..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Afbreken..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pauzeren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Gepauzeerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Hervatten..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Handeling nodig"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Voltooit %1 om %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Printer beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Niet beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Onbereikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactief"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anoniem"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Hiervoor zijn configuratiewijzigingen vereist"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Details"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Niet‑beschikbare printer"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Eerst beschikbaar"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Afgebroken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Platform Kalibreren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Gereed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Voorbereiden..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Afbreken..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Kalibratie Platform Starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pauzeren..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Beweeg Naar de Volgende Positie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Gepauzeerd"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Project openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Hervatten..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Bestaand(e) bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Handeling nodig"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Nieuw maken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Voltooit %1 om %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Samenvatting - Cura-project"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Printerinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hoe dient het conflict in de machine te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Printergroep"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profielinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Naam"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Niet in profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 overschrijving"
+msgstr[1] "%1 overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Afgeleide van"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 overschrijving"
+msgstr[1] "%1, %2 overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materiaalinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Zichtbaarheid instellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Zichtbare instellingen:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 van %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Openen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Controleer of de printer verbonden is:\n"
+"- Controleer of de printer ingeschakeld is.\n"
+"- Controleer of de printer verbonden is met het netwerk.\n"
+"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Verbind uw printer met het netwerk."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Gebruikershandleidingen online weergegeven"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Meer informatie over anonieme gegevensverzameling"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Ik wil geen anonieme gegevens verzenden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Verzenden van anonieme gegevens toestaan"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "In wachtrij"
+msgid "Color scheme"
+msgstr "Kleurenschema"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Beheren in browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materiaalkleur"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Lijntype"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Snelheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
+msgid "Compatibility Mode"
+msgstr "Compatibiliteitsmodus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Printtaken"
+msgid "Travels"
+msgstr "Bewegingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Totale printtijd"
+msgid "Helpers"
+msgstr "Helpers"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Wachten op"
+msgid "Shell"
+msgstr "Shell"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Printen via netwerk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Printerselectie"
+msgid "Only Show Top Layers"
+msgstr "Alleen bovenlagen weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 gedetailleerde lagen bovenaan weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Uw sleutel tot verbonden 3D-printen"
+msgid "Top / Bottom"
+msgstr "Boven-/onderkant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Pas uw ervaring aan met meer printprofielen en plug-ins\n"
-"- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n"
-"- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Binnenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Account maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Aan het controleren..."
+msgid "max"
+msgstr "max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nozzle-instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Account gesynchroniseerd"
+msgid "Nozzle size"
+msgstr "Maat nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Er is een fout opgetreden..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Updates in afwachting installeren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Compatibele materiaaldiameter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Controleren op accountupdates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Nozzle-offset X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Laatste update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Nozzle-offset Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker-account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Nummer van koelventilator"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Afmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Start-G-code van extruder"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Eind-G-code van extruder"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Printerinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Geen tijdschatting beschikbaar"
+msgid "X (Width)"
+msgstr "X (Breedte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Geen kostenraming beschikbaar"
+msgid "Y (Depth)"
+msgstr "Y (Diepte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Voorbeeld"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Hoogte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Tijdschatting"
+msgid "Build plate shape"
+msgstr "Vorm van het platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Materiaalschatting"
+msgid "Origin at center"
+msgstr "Centraal oorsprongpunt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Verwarmd bed"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Verwarmde werkvolume"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Slicen..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Versie G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Printkopinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Rijbrughoogte"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Aantal extruders"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Eind G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Afbeelding Converteren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hoogte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "De basishoogte van het platform in millimeters."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Basis (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "De breedte op het platform in millimeters."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Breedte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "De diepte op het platform in millimeters"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Diepte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Donkerder is hoger"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Lichter is hoger"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineair"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Doorschijnendheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmissie 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "De mate van effening die op de afbeelding moet worden toegepast."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Effenen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mijn back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Verwerken"
+msgid "Want more?"
+msgstr "Wilt u meer?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slicen"
+msgid "Backup Now"
+msgstr "Nu back-up maken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Het sliceproces starten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Auto back-up"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura-versie"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materialen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profielen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Invoegtoepassingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuleren"
+msgid "Restore"
+msgstr "Herstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Online gids voor probleemoplossing weergegeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Back-up verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Volledig Scherm In-/Uitschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Volledig scherm sluiten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Back-up herstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "Ongedaan &Maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Opnieuw"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favorieten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Standaard"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Bestand"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Project opslaan..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exporteren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Afsluiten"
+msgid "Export Selection..."
+msgstr "Selectie Exporteren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D-weergave"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "&Recente bestanden openen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Configuratie selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configuraties"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configuraties"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Aangepast"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Printer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Ingeschakeld"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marktplaats"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Beschikbare configuraties laden vanaf de printer..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Beel&d"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Weergave voorzijde"
+msgid "&Camera position"
+msgstr "&Camerapositie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Weergave bovenzijde"
+msgid "Camera view"
+msgstr "Camerabeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Weergave linkerzijde"
+msgid "Perspective"
+msgstr "Perspectief"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Weergave rechterzijde"
+msgid "Orthographic"
+msgstr "Orthografisch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura Configureren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Printer Toevoegen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Netwerkprinters"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Pr&inters Beheren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokale printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Materialen Beheren..."
+msgid "Visible Settings"
+msgstr "Zichtbare instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Meer materialen toevoegen van Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen"
+msgid "Collapse All Categories"
+msgstr "Alle categorieën samenvouwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "Hui&dige wijzigingen verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Instelling voor zichtbaarheid beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "In&stellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profielen Beheren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Online &Documentatie Weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Een &Bug Rapporteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Instellen als Actieve Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Nieuwe functies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder inschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Over..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder uitschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Geselecteerd model verwijderen"
-msgstr[1] "Geselecteerde modellen verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Geselecteerd model centreren"
-msgstr[1] "Geselecteerde modellen centreren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Geselecteerd model printen met:"
+msgstr[1] "Geselecteerde modellen printen met:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Geselecteerd model verveelvoudigen"
 msgstr[1] "Geselecteerde modellen verveelvoudigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Model Verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Aantal exemplaren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Model op Platform Ce&ntreren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Modellen &Groeperen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Aangepaste profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Groeperen van Modellen Opheffen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Huidige wijzigingen verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Modellen Samen&voegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profiel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Model verveelvoudigen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
+"\n"
+"Klik om het profielbeheer te openen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Alle Modellen Selecteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Aan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Platform Leegmaken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Uit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Alle Modellen Opnieuw Laden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimenteel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Alle modellen schikken op alle platformen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Aanbevolen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Alle modellen schikken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Selectie schikken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Instellingen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Alle Modelposities Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Alle Modeltransformaties Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Geleidelijke vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Bestand(en) &openen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nieuw project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Open Configuratiemap"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Zichtbaarheid Instelling Configureren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marktplaats"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
+msgid "Adhesion"
+msgstr "Hechting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Algemeen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Instellingen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt"
+msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profielen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Actieve print"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 wordt gesloten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Taaknaam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Weet u zeker dat u %1 wilt afsluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Printtijd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Geschatte resterende tijd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Bestand(en) openen"
+msgid "Discard or Keep changes"
+msgstr "Wijzigingen verwijderen of behouden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Package installeren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"U hebt enkele profielinstellingen aangepast.\n"
+"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
+"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Bestand(en) openen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profielinstellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Huidige wijzigingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Printer Toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Altijd vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Nieuwe functies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Verwijderen en nooit meer vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Behouden en nooit meer vragen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Wijzigingen verwijderen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Wijzigingen behouden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Ongeveer %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versie: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "End-to-end-oplossing voor fused filament 3D-printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3475,1982 +3608,2103 @@ msgstr ""
 "Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\n"
 "Cura maakt met trots gebruik van de volgende opensourceprojecten:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafische gebruikersinterface (GUI)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Toepassingskader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code-generator"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "InterProcess Communication-bibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programmeertaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-kader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Bindingen met GUI-kader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bindingenbibliotheek C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Indeling voor gegevensuitwisseling"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Ondersteuningsbibliotheek voor snellere berekeningen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van STL-bestanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van tweedimensionale objecten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van driehoekig rasters"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van 3MF-bestanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Ondersteuningsbibliotheek voor bestandsmetadata en streaming"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Seriële-communicatiebibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf-detectiebibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliotheek met veelhoeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statische typecontrole voor Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python fouttraceringsbibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Pythonbindingen voor libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Lettertype"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-pictogrammen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementatie van Linux-toepassing voor kruisdistributie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projectbestand openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Mijn keuze onthouden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Openen als project"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellen importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Wijzigingen verwijderen of behouden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"U hebt enkele profielinstellingen aangepast.\n"
-"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
-"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profielinstellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Huidige wijzigingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Altijd vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Verwijderen en nooit meer vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Behouden en nooit meer vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Wijzigingen verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Wijzigingen behouden"
+msgid "Open file(s)"
+msgstr "Bestand(en) openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Allemaal als model importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Project opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 &materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Geselecteerd model printen met %1"
-msgstr[1] "Geselecteerde modellen printen met %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projectbestand openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Mijn keuze onthouden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Openen als project"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellen importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Bestand"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Welkom bij Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "B&ewerken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Beel&d"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Aan de slag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "In&stellingen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Leeg"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Help ons Ultimaker Cura te verbeteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Voo&rkeuren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Help"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Machinetypen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nieuw project"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Materiaalgebruik"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Aantal slices"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marktplaats"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Instellingen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configuraties"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Meer informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
+msgid "Add printer by IP address"
+msgstr "Een printer toevoegen op IP-adres"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Voer het IP-adres van uw printer in."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marktplaats"
+msgid "Could not connect to device."
+msgstr "Kan geen verbinding maken met het apparaat."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Beschikbare configuraties laden vanaf de printer..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
+msgid "The printer at this address has not responded yet."
+msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Configuratie selecteren"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Terug"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Verbinding maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configuraties"
+msgid "Add a printer"
+msgstr "Een printer toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Aangepast"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Een netwerkprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Printer"
+msgid "Add a non-networked printer"
+msgstr "Een niet-netwerkprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Ingeschakeld"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiaal"
+msgid "Add a Cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
+msgid "Waiting for Cloud response"
+msgstr "Wachten op cloudreactie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Geselecteerd model printen met:"
-msgstr[1] "Geselecteerde modellen printen met:"
+msgid "No printers found in your account?"
+msgstr "Geen printers gevonden in uw account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Geselecteerd model verveelvoudigen"
-msgstr[1] "Geselecteerde modellen verveelvoudigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Printer handmatig toevoegen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Aantal exemplaren"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Project opslaan..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exporteren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Selectie Exporteren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiaal"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favorieten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Overslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Standaard"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Gebruikersovereenkomst"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Netwerkprinters"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Afwijzen en sluiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokale printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "&Recente bestanden openen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Kan in uw netwerk geen printer vinden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Vernieuwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiaal"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Printer toevoegen op IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Instellen als Actieve Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder inschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Probleemoplossing"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder uitschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabrikant"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Profieleigenaar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Printernaam"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Geef uw printer een naam"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Laatste update: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker-account"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Afmelden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Aan het controleren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Account gesynchroniseerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Er is een fout opgetreden..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Updates in afwachting installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Controleren op accountupdates"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lijst met objecten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Zichtbare instellingen"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Online gids voor probleemoplossing weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Alle categorieën samenvouwen"
+msgid "Toggle Full Screen"
+msgstr "Volledig Scherm In-/Uitschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Instelling voor zichtbaarheid beheren..."
+msgid "Exit Full Screen"
+msgstr "Volledig scherm sluiten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "Ongedaan &Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Opnieuw"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Afsluiten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Camerapositie"
+msgid "3D View"
+msgstr "3D-weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Camerabeeld"
+msgid "Front View"
+msgstr "Weergave voorzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectief"
+msgid "Top View"
+msgstr "Weergave bovenzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthografisch"
+msgid "Left Side View"
+msgstr "Weergave linkerzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Platform"
+msgid "Right Side View"
+msgstr "Weergave rechterzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Niet met een printer verbonden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura Configureren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Printer accepteert geen opdrachten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Printer Toevoegen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "In onderhoud. Controleer de printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Pr&inters Beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Verbinding met de printer is verbroken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Materialen Beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Printen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Meer materialen toevoegen van Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Gepauzeerd"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Voorbereiden..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "Hui&dige wijzigingen verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Verwijder de print"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profielen Beheren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Online &Documentatie Weergeven"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Een &Bug Rapporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Nieuwe functies"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Over..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Model Verwijderen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Model op Platform Ce&ntreren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Modellen &Groeperen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Groeperen van Modellen Opheffen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Modellen Samen&voegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Model verveelvoudigen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Alle Modellen Selecteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Platform Leegmaken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Alle Modellen Opnieuw Laden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Alle modellen schikken op alle platformen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Alle modellen schikken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Selectie schikken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Alle Modelposities Herstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Alle Modeltransformaties Herstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Bestand(en) &openen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nieuw project..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Open Configuratiemap"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Zichtbaarheid Instelling Configureren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marktplaats"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Berekend"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Instelling"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Huidig"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Eenheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Diameterwijziging bevestigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Printen Afbreken"
+msgid "Display Name"
+msgstr "Naam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Weet u zeker dat u het printen wilt afbreken?"
+msgid "Material Type"
+msgstr "Type Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Is geprint als support."
+msgid "Color"
+msgstr "Kleur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
+msgid "Properties"
+msgstr "Eigenschappen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "De vulling die met dit model overlapt, is aangepast."
+msgid "Density"
+msgstr "Dichtheid"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Overlappingen worden in dit model niet ondersteund."
+msgid "Diameter"
+msgstr "Diameter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Overschrijft %1 instelling."
-msgstr[1] "Overschrijft %1 instellingen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Kostprijs Filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lijst met objecten"
+msgid "Filament weight"
+msgstr "Gewicht filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Lengte filament"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Kostprijs per meter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Materiaal ontkoppelen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Beschrijving"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Gegevens Hechting"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Printer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Verwijderen Bevestigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Materiaal Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Materiaal Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Printers"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Hernoemen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profielen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profiel Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Geef een naam op voor dit profiel."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profiel Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profiel Hernoemen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profiel Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profiel Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Printer: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Algemene Instellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Zichtbaarheid Instellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Alles aanvinken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Algemeen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuta:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatisch slicen bij wijzigen van instellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatisch slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Gedrag kijkvenster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Geef niet-ondersteunde gedeelten van het model een rode markering. Zonder ondersteuning zullen deze gedeelten niet goed worden geprint."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Overhang weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Markeer ontbrekende of ongebruikelijke oppervlakken van het model met behulp van waarschuwingstekens. De toolpaths zullen vaak delen van de beoogde geometrie missen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Modelfouten weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Camera centreren wanneer een item wordt geselecteerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Moet het standaard zoomgedrag van Cura worden omgekeerd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Keer de richting van de camerazoom om."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Moet het zoomen in de richting van de muis gebeuren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthografische perspectief."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomen in de richting van de muis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Moeten modellen op het platform zodanig worden verplaatst dat ze elkaar niet meer doorsnijden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Modellen gescheiden houden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Moeten modellen in het printgebied omlaag worden gebracht zodat ze het platform raken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellen automatisch op het platform laten vallen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Toon het waarschuwingsbericht in de G-code-lezer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Waarschuwingsbericht in de G-code-lezer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Moet de laag in de compatibiliteitsmodus worden geforceerd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Compatibiliteitsmodus voor laagweergave forceren (opnieuw opstarten vereist)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Moet Cura openen op de locatie waar het gesloten werd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Herstel de vensterpositie bij het opstarten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Welk type cameraweergave moet worden gebruikt?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Cameraweergave:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspectief"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthografisch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Bestanden openen en opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Wilt u dat bestanden vanaf de desktop of externe toepassingen in dezelfde instantie van Cura worden geopend?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Gebruik één instantie van Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Moeten modellen worden geschaald naar het werkvolume als ze te groot zijn?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Grote modellen schalen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Een model wordt mogelijk extreem klein weergegeven als de eenheden bijvoorbeeld in meters zijn in plaats van in millimeters. Moeten dergelijke modellen worden opgeschaald?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extreem kleine modellen schalen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Moeten modellen worden geselecteerd nadat ze zijn geladen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modellen selecteren wanneer ze geladen zijn"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Moet er automatisch een op de printernaam gebaseerde voorvoegsel aan de naam van de printtaak worden toegevoegd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Machinevoorvoegsel toevoegen aan taaknaam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Dient er een samenvatting te worden weergegeven wanneer een projectbestand wordt opgeslagen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Dialoogvenster voor samenvatting weergeven tijdens het opslaan van een project"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Standaardgedrag tijdens het openen van een projectbestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Standaardgedrag tijdens het openen van een projectbestand: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Altijd vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Altijd als project openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Altijd modellen importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Standaardgedrag voor gewijzigde instellingen wanneer er naar een ander profiel wordt overgeschakeld: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Gewijzigde instellingen altijd verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Gewijzigde instellingen altijd naar nieuw profiel overbrengen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Moet Cura op updates controleren wanneer het programma wordt gestart?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Bij starten op updates controleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Mogen anonieme gegevens over uw print naar Ultimaker worden verzonden? Opmerking: er worden geen modellen, IP-adressen of andere persoonlijk identificeerbare gegevens verzonden of opgeslagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonieme) printgegevens verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Meer informatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Hernoemen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Maken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporteren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Printer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Verwijderen Bevestigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Materiaal Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Niet met een printer verbonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Materiaal Exporteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Printer accepteert geen opdrachten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "In onderhoud. Controleer de printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Verbinding met de printer is verbroken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informatie"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Printen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Diameterwijziging bevestigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Gepauzeerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Voorbereiden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Naam"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Verwijder de print"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type Materiaal"
+msgid "Abort Print"
+msgstr "Printen Afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Kleur"
+msgid "Are you sure you want to abort the print?"
+msgstr "Weet u zeker dat u het printen wilt afbreken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Eigenschappen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Instellingen zoeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Dichtheid"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Waarde naar alle extruders kopiëren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diameter"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Kostprijs Filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Gewicht filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Lengte filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Deze instelling zichtbaar houden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Kostprijs per meter"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
+"\n"
+"Klik om deze instellingen zichtbaar te maken."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Materiaal ontkoppelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Beïnvloedt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Beschrijving"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Beïnvloed door"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Gegevens Hechting"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Maken"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Deze instelling heeft een andere waarde dan in het profiel.\n"
+"\n"
+"Klik om de waarde van het profiel te herstellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profiel Maken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Geef een naam op voor dit profiel."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profiel Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profiel Hernoemen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profiel Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profiel Exporteren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Printer: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Huidige wijzigingen verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Algemene Instellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Berekend"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Instelling"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
+"\n"
+"Klik om de berekende waarde te herstellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profiel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D-weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Huidig"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Weergave voorzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Eenheid"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Weergave bovenzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Zichtbaarheid Instellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Linkeraanzicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Alles aanvinken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Rechteraanzicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "De huidige temperatuur van dit hotend."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Voorverwarmen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "De kleur van het materiaal in deze extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Het materiaal in deze extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "De nozzle die in deze extruder geplaatst is."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "De huidige temperatuur van het verwarmde bed."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Printerbediening"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Jog-positie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Jog-afstand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-code verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Er is geen verbinding met de printer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Printer toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Printers beheren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Verbonden printers"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Vooraf ingestelde printers"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Actieve print"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Taaknaam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Printtijd"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Geschatte resterende tijd"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profiel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
-"\n"
-"Klik om het profielbeheer te openen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Aangepaste profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt"
-msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Aan"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Uit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimenteel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Hechting"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden."
+msgid "Is printed as support."
+msgstr "Is geprint als support."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Geleidelijke vulling"
+msgid "Other models overlapping with this model are modified."
+msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
+msgid "Infill overlapping with this model is modified."
+msgstr "De vulling die met dit model overlapt, is aangepast."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Supportstructuur"
+msgid "Overlaps with this model are not supported."
+msgstr "Overlappingen worden in dit model niet ondersteund."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Overschrijft %1 instelling."
+msgstr[1] "Overschrijft %1 instellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
-"\n"
-"Klik om deze instellingen zichtbaar te maken."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marktplaats"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "B&ewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Beïnvloedt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Beïnvloed door"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Voo&rkeuren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Help"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nieuw project"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Deze instelling heeft een andere waarde dan in het profiel.\n"
-"\n"
-"Klik om de waarde van het profiel te herstellen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
-"\n"
-"Klik om de berekende waarde te herstellen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Instellingen zoeken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Waarde naar alle extruders kopiëren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Deze instelling verbergen"
+msgid "This package will be installed after restarting."
+msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Deze instelling verbergen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Deze instelling zichtbaar houden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 wordt gesloten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D-weergave"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Weet u zeker dat u %1 wilt afsluiten?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Weergave voorzijde"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Package installeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Weergave bovenzijde"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Bestand(en) openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Linkeraanzicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Rechteraanzicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Printer Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Nieuwe functies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Een cloudprinter toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Wachten op cloudreactie"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Geen printers gevonden in uw account?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Printer handmatig toevoegen"
+msgid "Add printer"
+msgstr "Printer toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Voltooien"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabrikant"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Profieleigenaar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Printernaam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Geef uw printer een naam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Een printer toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Een netwerkprinter toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Een niet-netwerkprinter toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Kan in uw netwerk geen printer vinden."
+msgid "Manage printers"
+msgstr "Printers beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Vernieuwen"
+msgid "Connected printers"
+msgstr "Verbonden printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Printer toevoegen op IP"
+msgid "Preset printers"
+msgstr "Vooraf ingestelde printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Een cloudprinter toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Geselecteerd model printen met %1"
+msgstr[1] "Geselecteerde modellen printen met %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Probleemoplossing"
+msgid "Time estimation"
+msgstr "Tijdschatting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Een printer toevoegen op IP-adres"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Voer het IP-adres van uw printer in."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Toevoegen"
+msgid "Material estimation"
+msgstr "Materiaalschatting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Kan geen verbinding maken met het apparaat."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "De printer op dit adres heeft nog niet gereageerd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Slicen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Terug"
+msgid "Processing"
+msgstr "Verwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Verbinding maken"
+msgid "Slice"
+msgstr "Slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker-account"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Uw sleutel tot verbonden 3D-printen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Pas uw ervaring aan met meer printprofielen en plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
+msgid "Start the slicing process"
+msgstr "Het sliceproces starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Overslaan"
+msgid "Cancel"
+msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Help ons Ultimaker Cura te verbeteren"
+msgid "No time estimation available"
+msgstr "Geen tijdschatting beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Geen kostenraming beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Machinetypen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Voorbeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Materiaalgebruik"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Aantal slices"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Invoegtoepassing voor Verwijderbaar uitvoerapparaat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Versie-upgrade van 3.5 naar 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Meer informatie"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Leeg"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Versie-upgrade van 4.6.2 naar 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Gebruikersovereenkomst"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Afwijzen en sluiten"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Versie-upgrade van 2.2 naar 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Welkom bij Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Volg deze stappen voor het instellen van\n"
-"Ultimaker Cura. Dit duurt slechts even."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Versie-upgrade van 4.2 naar 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Aan de slag"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Nieuwe functies in Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Versie-upgrade van 4.6.0 naar 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modelcontrole"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Versie-upgrade van 3.0 naar 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-lezer"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Versie-upgrade van 4.0 naar 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-schrijver"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Versie-upgrade van 2.6 naar 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF-lezer"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Versie-upgrade van 2.5 naar 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Een back-up maken van uw configuratie en deze herstellen."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Versie-upgrade van 4.1 naar 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine-back-end"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Versie-upgrade van 2.1 naar 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-profiellezer"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Versie-upgrade van 3.2 naar 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-profielschrijver"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Versie-upgrade van 4.5 naar 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Controleert op firmware-updates."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Firmware-updatecontrole"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Versie-upgrade van 4.4 naar 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Biedt machineacties voor het bijwerken van de firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware-updater"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Versie-upgrade van 4.7 naar 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Hiermee leest u G-code uit een gecomprimeerd archief."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lezer voor gecomprimeerde G-code"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Versie-upgrade van 3.3 naar 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Schrijver voor gecomprimeerde G-code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Versie-upgrade van 4.3 naar 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code-profiellezer"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Versie-upgrade van 3.4 naar 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code-lezer"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Versie-upgrade van 2.7 naar 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Met deze optie schrijft u G-code naar een bestand."
+msgid "Provides support for reading AMF files."
+msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code-schrijver"
+msgid "AMF Reader"
+msgstr "AMF-lezer"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Afbeeldinglezer"
+msgid "G-code Profile Reader"
+msgstr "G-code-profiellezer"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Biedt machineacties voor het bijwerken van de firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lezer voor Profielen van oudere Cura-versies"
+msgid "Firmware Updater"
+msgstr "Firmware-updater"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
+msgid "Provides support for reading X3D files."
+msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Actie machine-instellingen"
+msgid "X3D Reader"
+msgstr "X3D-lezer"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Deze optie biedt een controlestadium in Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Controlestadium"
+msgid "Toolbox"
+msgstr "Werkset"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5472,75 +5726,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Nabewerking"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Stadium voorbereiden"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine-back-end"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Deze optie biedt een voorbeeldstadium in Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de invoegtoepassing kan tevens de firmware worden bijgewerkt."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Voorbeeldstadium"
+msgid "USB printing"
+msgstr "USB-printen"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Invoegtoepassing voor Verwijderbaar uitvoerapparaat"
+msgid "Cura Profile Writer"
+msgstr "Cura-profielschrijver"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentrylogger"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker-netwerkverbinding"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Hiermee geeft u de simulatieweergave weer."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
+msgid "Ultimaker machine actions"
+msgstr "Acties Ultimaker-machines"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
+msgid "Provides support for reading 3MF files."
+msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Slice-informatie"
+msgid "3MF Reader"
+msgstr "3MF-lezer"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Biedt een normale, solide rasterweergave."
+msgid "Writes g-code to a compressed archive."
+msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Solide weergave"
+msgid "Compressed G-code Writer"
+msgstr "Schrijver voor gecomprimeerde G-code"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Hiermee leest u G-code uit een gecomprimeerd archief."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lezer voor gecomprimeerde G-code"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Modelcontrole"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Controleert op firmware-updates."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Firmware-updatecontrole"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-code-lezer"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5552,16 +5846,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Supportwisser"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Werkset"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5572,6 +5856,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh-lezer"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentrylogger"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5582,265 +5876,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP-lezer"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP-schrijver"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Acties Ultimaker-machines"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lezer voor Profielen van oudere Cura-versies"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
+msgid "Provides a prepare stage in Cura."
+msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker-netwerkverbinding"
+msgid "Prepare Stage"
+msgstr "Stadium voorbereiden"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de invoegtoepassing kan tevens de firmware worden bijgewerkt."
+msgid "Provides a monitor stage in Cura."
+msgstr "Deze optie biedt een controlestadium in Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-printen"
+msgid "Monitor Stage"
+msgstr "Controlestadium"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Biedt de röntgenweergave."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Versie-upgrade van 2.1 naar 2.2"
+msgid "X-Ray View"
+msgstr "Röntgenweergave"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Versie-upgrade van 2.2 naar 2.4"
+msgid "3MF Writer"
+msgstr "3MF-schrijver"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Versie-upgrade van 2.5 naar 2.6"
+msgid "Slice info"
+msgstr "Slice-informatie"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Deze optie biedt een voorbeeldstadium in Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Versie-upgrade van 2.6 naar 2.7"
+msgid "Preview Stage"
+msgstr "Voorbeeldstadium"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Hiermee geeft u de simulatieweergave weer."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Versie-upgrade van 2.7 naar 3.0"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Versie-upgrade van 3.0 naar 3.1"
+msgid "Machine Settings Action"
+msgstr "Actie machine-instellingen"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Versie-upgrade van 3.2 naar 3.3"
+msgid "Material Profiles"
+msgstr "Materiaalprofielen"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Biedt een normale, solide rasterweergave."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Versie-upgrade van 3.3 naar 3.4"
+msgid "Solid View"
+msgstr "Solide weergave"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Versie-upgrade van 3.4 naar 3.5"
+msgid "Cura Profile Reader"
+msgstr "Cura-profiellezer"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Versie-upgrade van 3.5 naar 4.0"
+msgid "UFP Writer"
+msgstr "UFP-schrijver"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Met deze optie schrijft u G-code naar een bestand."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Versie-upgrade van 4.0 naar 4.1"
+msgid "G-code Writer"
+msgstr "G-code-schrijver"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Versie-upgrade van 4.1 naar 4.2"
+msgid "Image Reader"
+msgstr "Afbeeldinglezer"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Een back-up maken van uw configuratie en deze herstellen."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Versie-upgrade van 4.2 naar 4.3"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Algemene stapel ontbreekt."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Versie-upgrade van 4.3 naar 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Uw model is niet veelvoudig. De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Modelfouten"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Versie-upgrade van 4.4 naar 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Laagdikte"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Uw sleutel tot verbonden 3D-printen"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Versie-upgrade van 4.5 naar 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Pas uw ervaring aan met meer printprofielen en plug-ins\n"
+#~ "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n"
+#~ "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Account maken"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Versie-upgrade van 4.6.0 naar 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Geselecteerd model verwijderen"
+#~ msgstr[1] "Geselecteerde modellen verwijderen"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Geselecteerd model centreren"
+#~ msgstr[1] "Geselecteerde modellen centreren"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Versie-upgrade van 4.6.2 naar 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Geselecteerd model verveelvoudigen"
+#~ msgstr[1] "Geselecteerde modellen verveelvoudigen"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Voltooien"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Versie-upgrade van 4.7 naar 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker-account"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Uw sleutel tot verbonden 3D-printen"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-lezer"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Pas uw ervaring aan met meer printprofielen en plug-ins"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiaalprofielen"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Biedt de röntgenweergave."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Volg deze stappen voor het instellen van\n"
+#~ "Ultimaker Cura. Dit duurt slechts even."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgenweergave"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Nieuwe functies in Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/nl_NL/fdmextruder.def.json.po b/resources/i18n/nl_NL/fdmextruder.def.json.po
index 61b993cdb3..18b2db0268 100644
--- a/resources/i18n/nl_NL/fdmextruder.def.json.po
+++ b/resources/i18n/nl_NL/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Dutch\n"
diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po
index 90db586658..cbfef07304 100644
--- a/resources/i18n/nl_NL/fdmprinter.def.json.po
+++ b/resources/i18n/nl_NL/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Hiermee bepaalt u of de extruders één verwarming delen in plaats van dat elke extruder zijn eigen verwarming heeft."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Verboden gebieden"
@@ -486,8 +506,8 @@ msgstr "Offset met extruder"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Pas de extruderoffset toe op het coördinatensysteem."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Vermenigvuldiging van de lijnbreedte van de eerste laag. Door deze te ve
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Shell"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Afstand van een beweging die ingevoegd is na de buitenwand, om de Z-naad beter te maskeren."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extruder bovenskin"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "De extruder train die voor het printen van de bovenste skinlaag wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Bovenste skinlagen"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Het aantal bovenste skinlagen. Doorgaans is één bovenste skinlaag voldoende om oppervlakken van hogere kwaliteit te verkrijgen."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extruder Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "De extruder train die voor het printen van de boven- en onderskin wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Dikte Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "De dikte van de boven-/onderlagen in de print. Het aantal boven-/onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Dikte Bovenkant"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "De dikte van de bovenlagen in de print. Het aantal bovenlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Bovenlagen"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Het aantal bovenlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bovenkant, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Bodemdikte"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "De dikte van de onderlagen in de print. Het aantal onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Bodemlagen"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Het aantal bodemlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Eerste onderste lagen"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Het aantal initiële onderste lagen, vanaf de bouwplaat naar boven. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Patroon Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Het patroon van de boven-/onderlagen."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Lijnen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Eerste laag patroon onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Het patroon van de eerste laag aan de onderkant van de print."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Lijnen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Boven-/onderkant Polygonen Verbinden"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Verbind skinpaden aan de boven-/onderkant waar ze naast elkaar lopen. Met deze instelling wordt bij concentrische patronen de bewegingstijd aanzienlijk verkort. Dit kan echter ten koste gaan van de kwaliteit van de bovenste laag aangezien de verbindingen in het midden van de vulling kunnen komen te liggen."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Lijnrichtingen boven-/onderkant"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Een lijst met gehele getallen voor lijnrichtingen die moet worden gebruikt wanneer voor de boven-/onderlagen een lijn- of zigzagpatroon wordt gebruikt. Elementen uit de lijst worden tijdens het printen van de lagen opeenvolgend gebruikt. Wanneer het einde van de lijst bereikt is, wordt deze weer van voren af aan gestart. De lijstitems zijn gescheiden door komma's en de hele lijst is binnen vierkante haken geplaatst. Standaard wordt een lege lijst gebruikt, wat inhoudt dat de traditionele standaardhoeken (45 en 135 graden) worden gebruikt."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Uitsparing Buitenwand"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Als deze optie ingeschakeld is, zijn de Z-naadcoördinaten relatief ten opzichte van het midden van elk deel. Als de optie uitgeschakeld is, staan de coördinaten voor een absolute positie op het platform."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extruder bovenskin"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "De extruder train die voor het printen van de bovenste skinlaag wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Bovenste skinlagen"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Het aantal bovenste skinlagen. Doorgaans is één bovenste skinlaag voldoende om oppervlakken van hogere kwaliteit te verkrijgen."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extruder Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "De extruder train die voor het printen van de boven- en onderskin wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Dikte Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "De dikte van de boven-/onderlagen in de print. Het aantal boven-/onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Dikte Bovenkant"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "De dikte van de bovenlagen in de print. Het aantal bovenlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Bovenlagen"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Het aantal bovenlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bovenkant, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Bodemdikte"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "De dikte van de onderlagen in de print. Het aantal onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Bodemlagen"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Het aantal bodemlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Eerste onderste lagen"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Het aantal initiële onderste lagen, vanaf de bouwplaat naar boven. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Patroon Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Het patroon van de boven-/onderlagen."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Lijnen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Eerste laag patroon onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Het patroon van de eerste laag aan de onderkant van de print."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Lijnen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Boven-/onderkant Polygonen Verbinden"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Verbind skinpaden aan de boven-/onderkant waar ze naast elkaar lopen. Met deze instelling wordt bij concentrische patronen de bewegingstijd aanzienlijk verkort. Dit kan echter ten koste gaan van de kwaliteit van de bovenste laag aangezien de verbindingen in het midden van de vulling kunnen komen te liggen."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Lijnrichtingen boven-/onderkant"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Een lijst met gehele getallen voor lijnrichtingen die moet worden gebruikt wanneer voor de boven-/onderlagen een lijn- of zigzagpatroon wordt gebruikt. Elementen uit de lijst worden tijdens het printen van de lagen opeenvolgend gebruikt. Wanneer het einde van de lijst bereikt is, wordt deze weer van voren af aan gestart. De lijstitems zijn gescheiden door komma's en de hele lijst is binnen vierkante haken geplaatst. Standaard wordt een lege lijst gebruikt, wat inhoudt dat de traditionele standaardhoeken (45 en 135 graden) worden gebruikt."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Geen skin in Z-gaten"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Pas de mate van overlap tussen de wanden en (de eindpunten van) de skin-middellijnen aan. Met een lichte overlap kunnen de wanden goed hechten aan de skin. Houd er rekening mee dat met een gelijke lijnbreedte voor skin en wand, skin buiten de wand kan treden bij een waarde groter dan de halve wandbreedte, omdat de nozzle van de skin-extruder op deze positie het midden van de wand al kan hebben bereikt."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Verwijderingsbreedte skin"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "De grootste breedte van skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Verwijderingsbreedte bovenste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "De grootste breedte van delen van bovenste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Verwijderingsbreedte onderste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "De grootste breedte van delen van de onderste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Uitbreidingsafstand van skin"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "De afstand waarmee de skin wordt uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden van aangrenzende lagen beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Uitbreidingsafstand van bovenste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "De afstand waarmee de bovenste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden op de bovenliggende laag beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Uitbreidingsafstand van onderste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "De afstand waarmee de onderste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en de wanden van de onderliggende laag. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Maximale skinhoek voor uitbreiding"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Minimale skinbreedte voor uitbreiding"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Skingebieden die smaller zijn dan deze waarde, worden niet uitgebreid. Dit voorkomt het uitbreiden van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Vulling"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "De minimale interne overhanghoek waarbij vulling wordt toegevoegd. Bij een waarde van 0° worden objecten volledig gevuld. Bij 90° wordt er geen vulling geprint."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Verwijderingsbreedte skin"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "De grootste breedte van skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Verwijderingsbreedte bovenste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "De grootste breedte van delen van bovenste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Verwijderingsbreedte onderste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "De grootste breedte van delen van de onderste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Uitbreidingsafstand van skin"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "De afstand waarmee de skin wordt uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden van aangrenzende lagen beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Uitbreidingsafstand van bovenste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "De afstand waarmee de bovenste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden op de bovenliggende laag beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Uitbreidingsafstand van onderste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "De afstand waarmee de onderste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en de wanden van de onderliggende laag. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Maximale skinhoek voor uitbreiding"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Van boven- en/of onderoppervlakken van het object met een hoek die groter is dan deze instelling, wordt de boven-/onderksin niet uitgebreid. Hiermee wordt de uitbreiding voorkomen van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft. Een hoek van 0° is horizontaal en een hoek van 90° is verticaal."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Minimale skinbreedte voor uitbreiding"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Skingebieden die smaller zijn dan deze waarde, worden niet uitgebreid. Dit voorkomt het uitbreiden van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Dikte skinrandondersteuning"
@@ -2560,8 +2590,8 @@ msgstr "Snelheid Eerste Laag"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "De snelheid waarmee de eerste laag wordt geprint. Hiervoor wordt een lagere waarde aanbevolen om hechting aan het platform te verbeteren."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,9 +5104,8 @@ msgstr "Rasterverwerkingsrang"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Bepaalt de prioriteit van dit raster bij meerdere overlappende vulrasters. Gebieden met meerdere overlappende vulrasters krijgen de instellingen van het"
-" vulraster met de laagste rang. Met een vulraster dat voorrang heeft, wordt de vulling van andere vulrasters en normale rasters aangepast."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "De maximale hoek van een overhang nadat deze printbaar is gemaakt. Bij een hoek van 0° worden alle overhangende gedeelten vervangen door een deel van het model dat is verbonden met het platform; bij een hoek van 90° wordt het model niet gewijzigd."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Coasting Inschakelen"
@@ -6362,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Omzettingsmatrix die moet worden toegepast op het model wanneer dit wordt geladen vanuit een bestand."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Pas de extruderoffset toe op het coördinatensysteem."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Shell"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Van boven- en/of onderoppervlakken van het object met een hoek die groter is dan deze instelling, wordt de boven-/onderksin niet uitgebreid. Hiermee wordt de uitbreiding voorkomen van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft. Een hoek van 0° is horizontaal en een hoek van 90° is verticaal."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "De snelheid waarmee de eerste laag wordt geprint. Hiervoor wordt een lagere waarde aanbevolen om hechting aan het platform te verbeteren."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Bepaalt de prioriteit van dit raster bij meerdere overlappende vulrasters. Gebieden met meerdere overlappende vulrasters krijgen de instellingen van het vulraster met de laagste rang. Met een vulraster dat voorrang heeft, wordt de vulling van andere vulrasters en normale rasters aangepast."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "De temperatuur van het verwarmde platform. Als deze waarde is ingesteld op 0, wordt de printbedtemperatuur niet aangepast."
diff --git a/resources/i18n/pl_PL/cura.po b/resources/i18n/pl_PL/cura.po
index 850fd98e1d..00dab1bb95 100644
--- a/resources/i18n/pl_PL/cura.po
+++ b/resources/i18n/pl_PL/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2019-11-15 15:23+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -18,175 +18,188 @@ msgstr ""
 "X-Generator: Poedit 2.2.4\n"
 "X-Poedit-SourceCharset: UTF-8\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Nieznany"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Ładowanie drukarek..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Ustawianie preferencji..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Dostępne drukarki sieciowe"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nie zastąpione"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Domyślne"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Ustawianie sceny ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Wizualny"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Ładowanie interfejsu ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Inżynieria"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Szkic"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Ostrzeżenie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Błąd"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Niestandardowy materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Niestandardowy"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Domyślne"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Nieznany"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Profile niestandardowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Wszystkie Wspierane Typy ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Wszystkie Pliki (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Logowanie nie powiodło się"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Znajdowanie nowej lokalizacji obiektów"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Szukanie Lokalizacji"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Wizualny"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Profil wizualny jest przeznaczony do drukowania prototypów i modeli z zamiarem podkreślenia wysokiej jakości wizualnej i powierzchni."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nie można Znaleźć Lokalizacji"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Inżynieria"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Profil inżynieryjny jest przeznaczony do drukowania prototypów funkcjonalnych i części końcowych z naciskiem na lepszą dokładność i lepszą tolerancję."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Kopia zapasowa"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Szkic"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Profil szkicu służy do drukowania początkowych prototypów i weryfikacji koncepcji z naciskiem na krótki czasu drukowania."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Poniższa drukarka nie może być podłączona, ponieważ jest częścią grupy"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Dostępne drukarki sieciowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Obszar Roboczy"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nie zastąpione"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura nie może się uruchomić"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -201,32 +214,32 @@ msgstr ""
 "                    <p>Proszę wyślij do nas ten Raport Błędu, aby rozwiązać problem.</p>\n"
 "              "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Wyślij raport błędu do Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Pokaż szczegółowy raport błędu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Pokaż folder konfiguracyjny"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Zrób Backup i Zresetuj Konfigurację"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Raport Błędu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -237,1120 +250,776 @@ msgstr ""
 "            <p>Proszę użyj przycisku \"Wyślij raport\", aby wysłać raport błędu automatycznie na nasze serwery</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informacje o systemie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Nieznany"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Wersja Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Platforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Wersja Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Wersja PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Jeszcze nie uruchomiono<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Wersja OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Wydawca OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Śledzenie błedu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Logi"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Wyślij raport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Ładowanie drukarek..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Ustawianie preferencji..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Ustawianie sceny ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Ładowanie interfejsu ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Jednocześnie można załadować tylko jeden plik G-code. Pominięto importowanie {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Ostrzeżenie"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nie można otworzyć żadnego innego pliku, jeśli ładuje się G-code. Pominięto importowanie {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Błąd"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Umieść Obiekty"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Rozmieszczenie Obiektów"
+msgid "Login failed"
+msgstr "Logowanie nie powiodło się"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Nie można odczytać odpowiedzi."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Proszę nadać wymagane uprawnienia podczas autoryzacji tej aplikacji."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Coś nieoczekiwanego się stało, podczas próby logowania, spróbuj ponownie."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Nie można uzyskać dostępu do serwera kont Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Plik już istnieje"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Plik <filename>{0}</filename> już istnieje. Czy na pewno chcesz go nadpisać?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Nieprawidłowy adres URL pliku:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Dysza"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ustawienia zostały zaaktualizowane"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Ekstruder(y) wyłączony(/e)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nie udało się wyeksportować profilu do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Nie można eksportować profilu do <filename>{0}</filename>: Wtyczka pisarza zgłosiła błąd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Wyeksportowano profil do <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Eksport udany"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Nie powiódł się import profilu z <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Nie można importować profilu z <filename>{0}</filename> przed dodaniem drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Brak niestandardowego profilu do importu w pliku <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Nie powiódł się import profilu z <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Profil <filename>{0}</filename> zawiera błędne dane, nie można go importować."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Błąd importu profilu z <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Plik {0} nie zawiera żadnego poprawnego profilu."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profil {0} ma nieznany typ pliku lub jest uszkodzony."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Niestandardowy profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Profilowi brakuje typu jakości."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Niewspierany"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Domyślne"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Dysza"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Ustawienia zostały zmienione w celu dopasowania do bieżącej dostępności ekstruderów:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Znajdowanie nowej lokalizacji obiektów"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ustawienia zostały zaaktualizowane"
+msgid "Finding Location"
+msgstr "Szukanie Lokalizacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nie można znaleźć lokalizacji w obrębie obszaru roboczego dla wszystkich obiektów"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Ekstruder(y) wyłączony(/e)"
+msgid "Can't Find Location"
+msgstr "Nie można Znaleźć Lokalizacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
-msgctxt "@action:button"
-msgid "Add"
-msgstr "Dodaj"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grupa #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Finish"
+msgid "Skip"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Anuluj"
+msgid "Close"
+msgstr "Zamknij"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupa #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
+msgctxt "@action:button"
+msgid "Next"
+msgstr "Następny"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Zewnętrzna ściana"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Ściany wewnętrzne"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Skin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Wypełnienie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Wypełnienie podpór"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Łączenie podpory"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Podpory"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Obwódka"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Wieża czyszcząca"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Ruch jałowy"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retrakcja"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Inny"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Następny"
+msgid "Add"
+msgstr "Dodaj"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Zamknij"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Asystent Modelu 3D"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Otwórz Plik Projektu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Zalecane"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Niestandardowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Plik 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Błąd zapisu pliku 3mf."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Plik 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Plik Cura Project 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Plik AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Wysokość obszaru roboczego została zmniejszona ze względu na wartość ustawienia Print Sequence (Sekwencja wydruku), aby zapobiec kolizji z wydrukowanymi modelami."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Kopie zapasowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Wgrywanie kopii zapasowej..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Wgrywanie kopii zapasowej zakończone."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Zarządzaj kopiami zapasowymi"
+msgid "Build Volume"
+msgstr "Obszar Roboczy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nie można utworzyć archiwum z folderu danych użytkownika: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Nie można pociąć"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."
+msgid "Backup"
+msgstr "Kopia zapasowa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Podjęto próbę przywrócenia kopii zapasowej Cura na podstawie niepoprawnych danych lub metadanych."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Próbowano przywrócić kopię zapasową Cura, nowszą od aktualnej wersji."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Przetwarzanie warstw"
+msgid "Multiplying and placing objects"
+msgstr "Zwielokrotnienie i umieszczanie przedmiotów"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informacja"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Profile Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nowe oprogramowanie %s jest dostępne"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Jak zaktualizować"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aktualizacja Oprogramowania Sprzętowego"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Skompresowany Plik G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Pliki G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Analizowanie G-code"
+msgid "Placing Objects"
+msgstr "Umieść Obiekty"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Szczegóły G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Plik G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Przygotuj G-code przed eksportem."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Obraz JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Obraz JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Obraz PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Obraz BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Obraz GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Profile Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ustawienia drukarki"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ustawienia każdego modelu osobno"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Konfiguruj ustawienia każdego modelu z osobna"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Przetwarzanie końcowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modyfikuj G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Przygotuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Podgląd"
+msgid "Placing Object"
+msgstr "Rozmieszczenie Obiektów"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Zapisz na dysk wymienny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Zapisz na dysk wymienny {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Nie ma żadnych formatów plików do zapisania!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Zapisywanie na Dysk Wymienny <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Zapisywanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Nie mogę zapisać do <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Nie mogę znaleźć nazwy pliku podczas próby zapisu do {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Nie można zapisać na wymiennym dysku {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Zapisano na dysk wymienny {0} jako {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Plik Zapisany"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Wyjmij"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Wyjmij urządzenie wymienne {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Wyjęto {0}. Możesz teraz bezpiecznie wyjąć dysk."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Bezpiecznie Odłącz Urządzenie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Nie można wysunąć {0}. Inny program może używać dysku."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Dysk wymienny"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Widok symulacji"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Nie pokazuj tego komunikatu ponownie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Widok warstwy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Widok modelu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Blokada Podpory"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr ""
+msgid "AMF File"
+msgstr "Plik AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Pliki G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Aktualizacja Oprogramowania Sprzętowego"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Plik"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Zgadzam się"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Akceptowanie Licencji Wtyczki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Otwórz skompresowaną siatkę trójkątów"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "Cyfrowa wymiana zasobów COLLADA"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Ustawienia każdego modelu osobno"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "Biblioteka glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Konfiguruj ustawienia każdego modelu z osobna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "Załączony JSON glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Przetwarzanie końcowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Format trójkątów Stanforda"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modyfikuj G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Nie można pociąć z obecnym materiałem, ponieważ nie jest on kompatybilny z wybraną maszyną lub konfiguracją."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pakiet Formatu Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Nie można pociąć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Nie można pociąć z bieżącymi ustawieniami. Następujące ustawienia mają błędy: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Wypoziomuj stół"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Nie można pokroić przez ustawienia osobne dla modelu. Następujące ustawienia mają błędy w jednym lub więcej modeli: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Wybierz aktualizacje"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Nie można pociąć, ponieważ wieża czyszcząca lub jej pozycja(e) są niewłaściwe."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Nie można pociąć, ponieważ obecne są obiekty powiązane z wyłączonym ekstruderem %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr ""
+msgid "Processing Layers"
+msgstr "Przetwarzanie warstw"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informacja"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Drukowanie USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Drukuj przez USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Połączono przez USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Drukowanie w toku"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Profile Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Połącz przez sieć"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1358,71 +1027,71 @@ msgid_plural "... and {0} others"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1434,2158 +1103,2491 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Wyślij i nadzoruj zadania druku z każdego miejsca, używając konta Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Rozpocznij"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
+msgid "tomorrow"
+msgstr "jutro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Zaktualizuj swoją drukarkę"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "dziś"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
+msgid "Sending Print Job"
+msgstr "Wysyłanie zadania druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Wysyłanie materiałów do drukarki"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Przesyłanie zadania do drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Próbujesz połączyć się z {0}, ale nie jest to gospodarz grupy. Możesz odwiedzić stronę internetową, aby skonfigurować jako gospodarza."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Nie jest gospodarzem grupy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Konfiguruj grupę"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Wyślij i nadzoruj zadania druku z każdego miejsca, używając konta Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Rozpocznij"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Poczekaj, aż bieżące zadanie zostanie wysłane."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Błąd druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Nie można wgrać danych do drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Błąd sieci"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Wysyłanie zadania druku"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura wykryła profile materiałów, które nie zostały jeszcze zainstalowane na gospodarzu grupy {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Przesyłanie zadania do drukarki."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Wysyłanie materiałów do drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Zadanie drukowania zostało pomyślnie wysłane do drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dane Wysłane"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Próbujesz połączyć się z drukarką, na której nie działa Ultimaker Connect. Zaktualizuj drukarkę do najnowszej wersji firmware."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Zaktualizuj swoją drukarkę"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Drukuj przez sieć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Drukuj przez sieć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Połączone przez sieć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Połącz przez sieć"
+msgid "Select upgrades"
+msgstr "Wybierz aktualizacje"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "jutro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Wypoziomuj stół"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "dziś"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Zalecane"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Drukowanie USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Plik projektu <filename>{0}</filename> zawiera nieznany typ maszyny <message>{1}</message>. Nie można zaimportować maszyny. Zostaną zaimportowane modele."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Drukuj przez USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Otwórz Plik Projektu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Połączono przez USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Trwa drukowanie przez USB, zamknięcie Cura spowoduje jego zatrzymanie. Jesteś pewien?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Nadal trwa drukowanie. Cura nie może rozpocząć kolejnego wydruku przez USB, dopóki poprzedni wydruk nie zostanie zakończony."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Drukowanie w toku"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Plik"
+msgid "3MF File"
+msgstr "Plik 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Widok X-Ray"
+msgid "Compressed G-code File"
+msgstr "Skompresowany Plik G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "Zapisywacz skompresowanego G-code nie obsługuje trybu tekstowego."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Otwórz projekt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Asystent Modelu 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Zaktualizuj istniejące"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Jeden lub więcej modeli 3D może nie zostać wydrukowanych optymalnie ze względu na wymiary modelu oraz konfigurację materiału:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Dowiedz się, jak zapewnić najlepszą możliwą jakość oraz niezawodnośc wydruku.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Zobacz przewodnik po jakości wydruku (strona w języku angielskim)</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Utwórz nowy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nie można uzyskać dostępu do informacji o aktualizacji."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Podsumowanie - Projekt Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ustawienia drukarki"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nowe oprogramowanie %s jest dostępne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Jak zaktualizować"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Typ"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Plik G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupa drukarek"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Analizowanie G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ustawienia profilu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Szczegóły G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Przed wysłaniem pliku upewnij się, że G-code jest odpowiedni do konfiguracji drukarki. Przedstawienie G-kodu może nie być dokładne."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Blokada Podpory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z profilem?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Stwórz obszar, w którym podpory nie będą drukowane."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nazwa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Otwórz skompresowaną siatkę trójkątów"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Cel"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "Cyfrowa wymiana zasobów COLLADA"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nie w profilu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "Biblioteka glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 nadpisanie"
-msgstr[1] "%1 Zastępuje"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "Załączony JSON glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Pochodna z"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Format trójkątów Stanforda"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 nadpisanie"
-msgstr[1] "%1, %2 zastępuje"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Skompresowana cyfrowa wymiana zasobów COLLADA"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ustawienia materiału"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Pakiet Formatu Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Profile Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Ustawienie widoczności"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Przygotuj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Tryb"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Widoczne ustawienie:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Widok X-Ray"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 poza %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Błąd zapisu pliku 3mf."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Plik 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Otwórz"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Plik Cura Project 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Chcesz więcej?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Utwórz kopię zapasową"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatyczne tworzenie kopii zapasowej"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Podgląd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Przywróć"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Widok warstwy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Usuń kopię zapasową"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Widok symulacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Przywróć kopię zapasową"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Wersja Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Nie pokazuj tego komunikatu ponownie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Drukarki"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ustawienia drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiały"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Widok modelu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Pluginy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Moje Kopie Zapasowe"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "Zapisywacz G-code nie obsługuje trybu nietekstowego."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Przygotuj G-code przed eksportem."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Obraz JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Zaloguj"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Obraz JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Obraz PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Obraz BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Obraz GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Wystąpił błąd podczas próby przywrócenia kopii zapasowej."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Kopie zapasowe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Wystąpił błąd podczas wgrywania kopii zapasowej."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Wgrywanie kopii zapasowej..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Wgrywanie kopii zapasowej zakończone."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Zarządzaj kopiami zapasowymi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Aktualizacja Oprogramowania Sprzętowego"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Oprogramowanie ukłądowe jest częścią oprogramowania działającego bezpośrednio na drukarce 3D. Oprogramowanie to steruje silnikami krokowymi, reguluje temperaturę i ostatecznie sprawia, że drukarka działa."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Oprogramowanie ukłądowe dostarczane z nowymi drukarkami działa, ale nowe wersje mają zazwyczaj więcej funkcji i ulepszeń."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automatycznie uaktualnij oprogramowanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Prześlij niestandardowe oprogramowanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ nie ma połączenia z drukarką."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Oprogramowanie sprzętowe nie może być zaktualizowane, ponieważ połączenie z drukarką nie wspiera usługi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Wybierz niestandardowe oprogramowanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Aktualizacja oprogramowania układowego"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Aktualizowanie oprogramowania."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Aktualizacja oprogramowania zakończona."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Aktualizacja oprogramowania nie powiodła się z powodu nieznanego błędu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu komunikacji."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Aktualizacja oprogramowania nie powiodła się z powodu błędu wejścia / wyjścia."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Aktualizacja oprogramowania nie powiodła się z powodu utraconego oprogramowania."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Konwertuj obraz ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Wysokość (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Wysokość podstawy od stołu w milimetrach."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Baza (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Szerokość w milimetrach na stole."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Szerokość (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Głębokość w milimetrach na stole"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Głębokość (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Ciemniejsze jest wyższe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Jaśniejszy jest wyższy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Ilość wygładzania do zastosowania do obrazu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Wygładzanie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Drukarka"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ustawienia dyszy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Rozmiar dyszy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Kompatybilna średnica materiału"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Korekcja dyszy X"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Korekcja dyszy Y"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Dalej"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Numer Wentylatora"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Początkowy G-code ekstrudera"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Końcowy G-code ekstrudera"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ustawienia drukarki"
+msgid "The following packages will be added:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szerokość)"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Głębokość)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Potwierdź deinstalację"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Wysokość)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Kształt stołu roboczego"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiały"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Początek na środku"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Podgrzewany stół"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Potwierdź"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Grzany obszar roboczy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Wersja G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ustawienia głowicy"
+msgid "Community Contributions"
+msgstr "Udział Społeczności"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+msgid "Community Plugins"
+msgstr "Wtyczki Społeczności"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
 msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+msgid "Generic Materials"
+msgstr "Materiały Podstawowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Version"
+msgstr "Wersja"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Last updated"
+msgstr "Ostatnia aktualizacja"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Wysokość wózka"
+msgid "Brand"
+msgstr "Marka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Liczba ekstruderów"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Początkowy G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Końcowy G-code"
+msgid "Downloads"
+msgstr "Pobrań"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
 msgstr ""
-"Upewnij się, że drukarka ma połączenie:\n"
-"- Sprawdź, czy drukarka jest włączona.\n"
-"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
-"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Podłącz drukarkę do sieci."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Pokaż instrukcję użytkownika online"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Typ siatki"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normalny model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Drukuj jako podpora"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "Modyfikuj ustawienia nakładania"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "Nie wspieraj nałożenia"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
+msgid "No plugin has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Wybierz ustawienia"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "Wybierz Ustawienia, aby dostosować ten model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Filtr..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Pokaż wszystko"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Plugin post-processingu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Skrypty post-processingu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Dodaj skrypt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
-msgctxt "@label"
-msgid "Settings"
-msgstr "Ustawienia"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Schemat kolorów"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Kolor materiału"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Rodzaj linii"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Grubość warstwy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Tryb zgodności"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Ruchy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Pomoce"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Obrys"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Wypełnienie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Pokaż tylko najwyższe warstwy"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Pokaż 5 Szczegółowych Warstw"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Góra/ Dół"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Wewnętrzna ściana"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "min"
-msgstr "min"
+msgid "Website"
+msgstr "Strona internetowa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "max"
-msgstr "max"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Wiećej informacji o zbieraniu anonimowych danych"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nie chcę wysyłać anonimowych danych"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Pozwól na wysyłanie anonimowych danych"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Zaloguj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Powrót"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Uzyskiwanie pakietów..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
 msgid "Compatibility"
 msgstr "Zgodność"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
 msgctxt "@label:table_header"
 msgid "Machine"
 msgstr "Drukarka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
 msgctxt "@label:table_header"
 msgid "Build Plate"
 msgstr "Stół roboczy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
 msgctxt "@label:table_header"
 msgid "Support"
 msgstr "Podpory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
 msgctxt "@label:table_header"
 msgid "Quality"
 msgstr "Jakość"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
 msgid "Technical Data Sheet"
 msgstr "Dane Techniczne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
 msgctxt "@action:label"
 msgid "Safety Data Sheet"
 msgstr "Dane Bezpieczeństwa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
 msgctxt "@action:label"
 msgid "Printing Guidelines"
 msgstr "Wskazówki Drukowania"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
 msgctxt "@action:label"
 msgid "Website"
 msgstr "Strona Internetowa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Wtyczki"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiał"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
 msgid "Installed"
-msgstr "Zainstalowane"
+msgstr "Zainstalowano"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "Aktualizuj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "Aktualizowanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "Zaktualizowano"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Zainstaluj poprzednią wersję"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Odinstaluj"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Zainstalowane"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href=‚%1’>Zaloguj</a> aby zainstalować lub aktualizować"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href=‚%1’>Kup materiał na szpulach</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
 msgid "Premium"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
 msgctxt "@label"
 msgid "Search materials"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
 msgid "You will need to restart Cura before changes in packages have effect."
 msgstr "Należy uruchomić ponownie Cura, aby zmiany w pakietach przyniosły efekt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Wtyczki"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiał"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Zainstalowano"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Zostanie zainstalowane po ponownym uruchomieniu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Zaloguj</a> aby aktualizować"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Zainstaluj poprzednią wersję"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Odinstaluj"
+msgid "Back"
+msgstr "Powrót"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
 msgctxt "@action:button"
 msgid "Install"
 msgstr "Instaluj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "Typ siatki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+msgctxt "@label"
+msgid "Normal model"
+msgstr "Normalny model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Dalej"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+msgctxt "@label"
+msgid "Print as support"
+msgstr "Drukuj jako podpora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr ""
+msgid "Modify settings for overlaps"
+msgstr "Modyfikuj ustawienia nakładania"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgid "Don't support overlaps"
+msgstr "Nie wspieraj nałożenia"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Potwierdź deinstalację"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Odinstalowujesz materiały i/lub profile, które są aktualnie używane. Zatwierdzenie spowoduje przywrócenie bieżących ustawień materiału/profilu do ustawień domyślnych."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Wybierz ustawienia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiały"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "Wybierz Ustawienia, aby dostosować ten model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Filtr..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Potwierdź"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Pokaż wszystko"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Plugin post-processingu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Website"
-msgstr "Strona internetowa"
+msgid "Post Processing Scripts"
+msgstr "Skrypty post-processingu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
-msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Dodaj skrypt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "Version"
-msgstr "Wersja"
+msgid "Settings"
+msgstr "Ustawienia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
-msgctxt "@label"
-msgid "Last updated"
-msgstr "Ostatnia aktualizacja"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "Marka"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Pobrań"
+msgid "Queued"
+msgstr "W kolejce"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Udział Społeczności"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Zarządzaj w przeglądarce"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Wtyczki Społeczności"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiały Podstawowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Nie można połączyć się z bazą danych pakietów Cura. Sprawdź swoje połączenie z internetem."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr ""
+msgid "Print jobs"
+msgstr "Zadania druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
+msgstr "Łączny czas druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "Oczekiwanie na"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "Zmiany konfiguracji"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "Nadpisz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
+msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Uzyskiwanie pakietów..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "Zmień materiał %1 z %2 na %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Poziomowanie stołu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Zmień rdzeń drukujący %1 z %2 na %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Zmień stół na %1 (Nie można nadpisać)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Rozpocznij poziomowanie stołu roboczego"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
+msgstr "Szkło"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Przejdź do następnego położenia"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "Aluminum"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
+msgid "Unavailable printer"
+msgstr "Drukarka niedostępna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
+msgid "First available"
+msgstr "Pierwsza dostępna"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Połącz się z drukarką sieciową"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Aby drukować bezpośrednio na drukarce przez sieć, upewnij się, że drukarka jest podłączona do sieci za pomocą kabla sieciowego lub do sieci WIFI. Jeśli nie podłączysz Cury do drukarki, możesz nadal używać napędu USB do przesyłania plików G-Code do drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Wybierz swoją drukarkę z poniższej listy:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Edycja"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Usunąć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Odśwież"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Jeżeli twojej drukarki nie ma na liście, przeczytaj <a href='%1'>poradnik o problemach z drukowaniem przez sieć</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Rodzaj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Wersja oprogramowania"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Ta drukarka nie jest skonfigurowana jako host dla grupy drukarek."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Ta drukarka jest hostem grupy %1 drukarek."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Połącz"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Nieprawidłowy adres IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Proszę podać poprawny adres IP."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Adres drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Wprowadź adres IP drukarki."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Zmiany konfiguracji"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Nadpisz"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Przypisana drukarka, %1, wymaga następującej zmiany konfiguracji:"
-msgstr[1] "Przypisana drukarka, %1, wymaga następujących zmian konfiguracji:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Drukarka %1 jest przypisana, ale zadanie zawiera nieznaną konfigurację materiału."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Zmień materiał %1 z %2 na %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Załaduj %3 jako materiał %1 (Nie można nadpisać)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Zmień rdzeń drukujący %1 z %2 na %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Zmień stół na %1 (Nie można nadpisać)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Nadpisanie spowoduje użycie określonych ustawień w istniejącej konfiguracji drukarki. Może to spowodować niepowodzenie druku."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Drukuj przez sieć"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Szkło"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Drukuj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminum"
+msgid "Printer selection"
+msgstr "Wybór drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Przesuń na początek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Usuń"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Ponów"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Zatrzymywanie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Przywracanie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Wstrzymaj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Przerywanie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Anuluj"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Czy jesteś pewien, że chcesz przesunąć %1 na początek kolejki?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Przesuń zadanie drukowania na początek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Czy jesteś pewien, że chcesz usunąć %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Usuń zadanie drukowania"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Czy jesteś pewien, że chcesz anulować %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Anuluj wydruk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Anulowano"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Zakończono"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Przygotowyję..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Przerywanie..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Zatrzymywanie..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Wstrzymana"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Przywracanie..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Konieczne są działania"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Zakończone %1 z %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Zarządzaj drukarkami"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Zaktualizuj oprogramowanie drukarki, aby zdalnie zarządzać kolejką."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Wczytywanie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Niedostępne"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Nieosiągalna"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Zajęta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Drukowanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Bez tytułu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonimowa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Wymaga zmian konfiguracji"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Szczegóły"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Drukarka niedostępna"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Proszę wybrać ulepszenia wykonane w tym Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Pierwsza dostępna"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Płyta grzewcza (zestaw oficjalny lub własnej roboty)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Anulowano"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Poziomowanie stołu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Zakończono"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Aby upewnić się, że wydruki będą wychodziły świetne, możesz teraz wyregulować stół. Po kliknięciu przycisku \"Przejdź do następnego położenia\" dysza będzie się poruszać do różnych pozycji, które można wyregulować."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Przygotowyję..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Dla każdej pozycji; Włóż kartkę papieru pod dyszę i wyreguluj wysokość stołu roboczego. Wysokość stołu jest prawidłowa, gdy papier stawia lekki opór."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Przerywanie..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Rozpocznij poziomowanie stołu roboczego"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Zatrzymywanie..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Przejdź do następnego położenia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Wstrzymana"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Otwórz projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Przywracanie..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Zaktualizuj istniejące"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Konieczne są działania"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Utwórz nowy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Zakończone %1 z %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Podsumowanie - Projekt Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ustawienia drukarki"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Jak powinny być rozwiązywane błędy w maszynie?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Typ"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupa drukarek"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ustawienia profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z profilem?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nazwa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Cel"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nie w profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 nadpisanie"
+msgstr[1] "%1 Zastępuje"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Pochodna z"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 nadpisanie"
+msgstr[1] "%1, %2 zastępuje"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ustawienia materiału"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Jak powinien zostać rozwiązany problem z materiałem?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Ustawienie widoczności"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Tryb"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Widoczne ustawienie:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 poza %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Ładowanie projektu usunie wszystkie modele z platformy roboczej."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Otwórz"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Niektóre rzeczy mogą być problematyczne podczas tego wydruku. Kliknij, aby zobaczyć porady dotyczące regulacji."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Upewnij się, że drukarka ma połączenie:\n"
+"- Sprawdź, czy drukarka jest włączona.\n"
+"- Sprawdź, czy drukarka jest podłączona do sieci.\n"
+"- Sprawdź, czy jesteś zalogowany, aby znaleźć drukarki podłączone do chmury."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Podłącz drukarkę do sieci."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Pokaż instrukcję użytkownika online"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Wiećej informacji o zbieraniu anonimowych danych"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkowania. Poniżej znajduje się przykład wszystkich udostępnianych danych:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nie chcę wysyłać anonimowych danych"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Pozwól na wysyłanie anonimowych danych"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "W kolejce"
+msgid "Color scheme"
+msgstr "Schemat kolorów"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Zarządzaj w przeglądarce"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Kolor materiału"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Rodzaj linii"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "W kolejce nie ma zadań drukowania. Potnij i wyślij zadanie, aby dodać."
+msgid "Compatibility Mode"
+msgstr "Tryb zgodności"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Zadania druku"
+msgid "Travels"
+msgstr "Ruchy"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Łączny czas druku"
+msgid "Helpers"
+msgstr "Pomoce"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Oczekiwanie na"
+msgid "Shell"
+msgstr "Obrys"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Drukuj przez sieć"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Wypełnienie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Drukuj"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Wybór drukarki"
+msgid "Only Show Top Layers"
+msgstr "Pokaż tylko najwyższe warstwy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Zaloguj"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Pokaż 5 Szczegółowych Warstw"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr ""
+msgid "Top / Bottom"
+msgstr "Góra/ Dół"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Wewnętrzna ściana"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Utwórz konto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr ""
+msgid "max"
+msgstr "max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ustawienia dyszy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr ""
+msgid "Nozzle size"
+msgstr "Rozmiar dyszy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
+msgid "mm"
+msgstr "mm"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Kompatybilna średnica materiału"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Korekcja dyszy X"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Korekcja dyszy Y"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Numer Wentylatora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Początkowy G-code ekstrudera"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Końcowy G-code ekstrudera"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Drukarka"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ustawienia drukarki"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+msgctxt "@label"
+msgid "X (Width)"
+msgstr "X (Szerokość)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+msgctxt "@label"
+msgid "Y (Depth)"
+msgstr "Y (Głębokość)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Wysokość)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+msgctxt "@label"
+msgid "Build plate shape"
+msgstr "Kształt stołu roboczego"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Początek na środku"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Podgrzewany stół"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Grzany obszar roboczy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Wersja G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ustawienia głowicy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Wysokość wózka"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Liczba ekstruderów"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Początkowy G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Końcowy G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Konwertuj obraz ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Maksymalna odległość każdego piksela od \"Bazy.\""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Wysokość (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Wysokość podstawy od stołu w milimetrach."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Baza (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Szerokość w milimetrach na stole."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Szerokość (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Głębokość w milimetrach na stole"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Głębokość (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Dla litofanów ciemne piksele powinny odpowiadać grubszym miejscom, aby zablokować więcej światła. Dla zaznaczenia wysokości map, jaśniejsze piksele oznaczają wyższy teren, więc jaśniejsze piksele powinny odpowiadać wyższym położeniom w wygenerowanym modelu 3D."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Ciemniejsze jest wyższe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Jaśniejszy jest wyższy"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Szacunkowy czas niedostępny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Ilość wygładzania do zastosowania do obrazu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
-msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Szacunkowy koszt niedostępny"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Wygładzanie"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Moje Kopie Zapasowe"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nie masz żadnych kopii zapasowych. Użyj przycisku „Utwórz kopię zapasową”, aby go utworzyć."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Podczas fazy podglądu będziesz ograniczony do 5 widocznych kopii zapasowych. Usuń kopię zapasową, aby zobaczyć starsze."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Wykonaj kopię zapasową i zsynchronizuj ustawienia Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Preview"
-msgstr "Podgląd"
+msgid "Want more?"
+msgstr "Chcesz więcej?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Szacunkowy czas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "Utwórz kopię zapasową"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Szacunkowy materiał"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatyczne tworzenie kopii zapasowej"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatycznie twórz kopie zapasowe każdego dnia, w którym uruchomiono Curę."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Wersja Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Cięcie..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nie można pociąć"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiały"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
-msgctxt "@button"
-msgid "Processing"
-msgstr "Przetwarzanie"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Pluginy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Slice"
-msgstr "Potnij"
+msgid "Restore"
+msgstr "Przywróć"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Rozpocznij proces cięcia"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Usuń kopię zapasową"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Anuluj"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Czy na pewno chcesz usunąć tę kopię zapasową? Tej czynności nie można cofnąć."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Pokaż przewodnik rozwiązywania problemów online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Przywróć kopię zapasową"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Przełącz tryb pełnoekranowy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Musisz zrestartować Curę przed przywróceniem kopii zapasowej. Czy chcesz teraz zamknąć Curę?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Wyłącz tryb pełnoekranowy"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Kopie zapasowe cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Cofnij"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Ponów"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Ulubione"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Podstawowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Plik"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Eksportuj..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Zamknij"
+msgid "Export Selection..."
+msgstr "Eksportuj Zaznaczenie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Widok 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Otwórz &ostatnio używane"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Wybierz konfigurację"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfiguracje"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfiguracje"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Niestandardowe"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Drukarka"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Włączona"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marketplace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Widok"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Widok z przodu"
+msgid "&Camera position"
+msgstr "&Pozycja kamery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Widok z góry"
+msgid "Camera view"
+msgstr "Widok z kamery"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Widok z lewej strony"
+msgid "Perspective"
+msgstr "Perspektywiczny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Widok z prawej strony"
+msgid "Orthographic"
+msgstr "Rzut ortograficzny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Konfiguruj Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "P&ole robocze"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Dodaj drukarkę..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Drukarki dostępne w sieci"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Zarządzaj drukarkami..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Drukarki lokalne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Zarządzaj materiałami..."
+msgid "Visible Settings"
+msgstr "Widoczne Ustawienia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Aktualizuj profil z bieżącymi ustawieniami"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Odrzuć bieżące zmiany"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Ustaw Widoczność Ustawień..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Utwórz profil z bieżących ustawień..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Opcje"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Zarządzaj profilami..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Drukarka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Pokaż dokumentację internetową"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Zgłoś błąd"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Ustaw jako aktywną głowicę"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Co nowego"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Włącz Ekstruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "O..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Wyłącz Ekstruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Usuń wybrany model"
-msgstr[1] "Usuń wybrane modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Wyśrodkuj wybrany model"
-msgstr[1] "Wyśrodkuj wybrane modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Wydrukuj wybrany model z:"
+msgstr[1] "Wydrukuj wybrane modele z:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
-msgstr[0] "Rozmnóż wybrany model"
-msgstr[1] "Rozmnóż wybrane modele"
+msgstr[0] "Zduplikuj wybrany model"
+msgstr[1] "Zduplikuj wybrane modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Usuń model"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Liczba kopii"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Wyśrodkuj model na platformie"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Grupuj modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Profile niestandardowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Rozgrupuj modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Odrzuć bieżące zmiany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Połącz modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Powiel model..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
+"\n"
+"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Wybierz wszystkie modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Wł"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Wyczyść stół"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Wył"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Przeładuj wszystkie modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Eksperymentalne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Polecane"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Ułóż wszystkie modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Niestandardowe"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Wybór ułożenia"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ustawienia druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Zresetuj wszystkie pozycje modelu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Zresetuj wszystkie przekształcenia modelu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Stopniowe wypełnienie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Otwórz plik(i)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nowy projekt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Pokaż folder konfiguracji"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Skonfiguruj widoczność ustawień ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Podpory"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
+msgid "Adhesion"
+msgstr "Przyczepność"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Ogólny"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ustawienia"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
+msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Drukarki"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profile"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktywny wydruk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nazwa pracy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Czas druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Szacowany czas pozostały"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Otwórz plik(i)"
+msgid "Discard or Keep changes"
+msgstr "Odrzuć lub zachowaj zmiany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instaluj pakiety"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Otwórz plik(i)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Ustawienia profilu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Dodaj drukarkę"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Zawsze pytaj o to"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Co nowego"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Odrzuć i nigdy nie pytaj"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Zachowaj i nigdy nie pytaj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "version: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kompletne rozwiązanie do druku przestrzennego."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3594,1999 +3596,2103 @@ msgstr ""
 "Cura jest rozwijana przez firmę Ultimaker B.V. we współpracy ze społecznością.\n"
 "Cura z dumą korzysta z następujących projektów open source:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Graficzny interfejs użytkownika"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Struktura aplikacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Generator g-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteka komunikacji międzyprocesowej"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Język programowania"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Framework GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Powiązania Frameworka GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteka Powiązań C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Format wymiany danych"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Wsparcie biblioteki do obliczeń naukowych"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Wsparcie biblioteki dla szybszej matematyki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Wsparcie biblioteki do obsługi plików STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Biblioteka pomocnicza do obsługi obiektów płaskich"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteka pomocnicza do obsługi siatek trójkątów"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Wsparcie biblioteki do obsługi plików 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteka pomocy dla metadanych plików i przesyłania strumieniowego"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteka komunikacji szeregowej"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Bilbiotek poszukująca Zeroconf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteka edytująca pola"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Czcionka"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ikony SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Wdrożenie aplikacji pomiędzy dystrybucjami Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Otwórz plik projektu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Zapamiętaj mój wybór"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Otwórz jako projekt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importuj modele"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Odrzuć lub zachowaj zmiany"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Ustawienia profilu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Zawsze pytaj o to"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Odrzuć i nigdy nie pytaj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Zachowaj i nigdy nie pytaj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr ""
+msgid "Open file(s)"
+msgstr "Otwórz plik(i)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Znaleziono jeden lub więcej plików projektu w wybranych plikach. Możesz otwierać tylko jeden plik projektu na raz. Proponujemy importowanie tylko modeli z tych plików. Czy chcesz kontynuować?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importuj wszystkie jako modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Zapisz projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Ekstruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Nie pokazuj podsumowania projektu podczas ponownego zapisywania"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Zapisz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Drukuj Wybrany Model z %1"
-msgstr[1] "Drukuj Wybrane Modele z %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Otwórz plik projektu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Jest to plik projektu Cura. Czy chcesz otworzyć go jako projekt, czy zaimportować z niego modele?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Zapamiętaj mój wybór"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Otwórz jako projekt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importuj modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Bez tytułu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Plik"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Witaj w Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Edytuj"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Widok"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Rozpocznij"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Opcje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Pusty"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "&Rozszerzenia"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Pomóż nam ulepszyć Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Preferencje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "P&omoc"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Typy maszyn"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nowy projekt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Zużycie materiału"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Ilość warstw"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marketplace"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Ustawienia druku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfiguracje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Więcej informacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ta konfiguracja jest niedostępna, ponieważ %1 jest nierozpoznany. Przejdź do %2, aby pobrać prawidłowy profil materiału."
+msgid "Add printer by IP address"
+msgstr "Dodaj drukarkę przez IP"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Dodaj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marketplace"
+msgid "Could not connect to device."
+msgstr "Nie można połączyć się z urządzeniem."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Ładowanie dostępnych konfiguracji z drukarki..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Konfiguracje są niedostępne, ponieważ drukarka jest odłączona."
+msgid "The printer at this address has not responded yet."
+msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Wybierz konfigurację"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Wstecz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Połącz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfiguracje"
+msgid "Add a printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Niestandardowe"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Dodaj drukarkę sieciową"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Drukarka"
+msgid "Add a non-networked printer"
+msgstr "Dodaj drukarkę niesieciową"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Włączona"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiał"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Użyj kleju dla lepszej przyczepności dla tej kombinacji materiałów."
+msgid "Waiting for Cloud response"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Wydrukuj wybrany model z:"
-msgstr[1] "Wydrukuj wybrane modele z:"
+msgid "No printers found in your account?"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Zduplikuj wybrany model"
-msgstr[1] "Zduplikuj wybrane modele"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Liczba kopii"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Eksportuj..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Eksportuj Zaznaczenie..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiał"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Ulubione"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Podstawowe"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Umowa z użytkownikiem"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Drukarki dostępne w sieci"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Odrzuć i zamknij"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Drukarki lokalne"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Otwórz &ostatnio używane"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Nie znaleziono drukarki w Twojej sieci."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Drukarka"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Odśwież"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiał"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Dodaj drukarkę przez IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Ustaw jako aktywną głowicę"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Włącz Ekstruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Rozwiązywanie problemów"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Wyłącz Ekstruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Producent"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nazwa drukarki"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Zaloguj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista obiektów"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Widoczne Ustawienia"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Pokaż przewodnik rozwiązywania problemów online"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr ""
+msgid "Toggle Full Screen"
+msgstr "Przełącz tryb pełnoekranowy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Ustaw Widoczność Ustawień..."
+msgid "Exit Full Screen"
+msgstr "Wyłącz tryb pełnoekranowy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Cofnij"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Ponów"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Zamknij"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Pozycja kamery"
+msgid "3D View"
+msgstr "Widok 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Widok z kamery"
+msgid "Front View"
+msgstr "Widok z przodu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektywiczny"
+msgid "Top View"
+msgstr "Widok z góry"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Rzut ortograficzny"
+msgid "Left Side View"
+msgstr "Widok z lewej strony"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "P&ole robocze"
+msgid "Right Side View"
+msgstr "Widok z prawej strony"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nie podłączono do drukarki"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Konfiguruj Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Drukarka nie akceptuje poleceń"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Dodaj drukarkę..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "W naprawie. Sprawdź drukarkę"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Zarządzaj drukarkami..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Utracone połączenie z drukarką"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Zarządzaj materiałami..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Drukowanie..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Wstrzymano"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Aktualizuj profil z bieżącymi ustawieniami"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Przygotowywanie ..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Odrzuć bieżące zmiany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Usuń wydruk"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Utwórz profil z bieżących ustawień..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Zarządzaj profilami..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Pokaż dokumentację internetową"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Zgłoś błąd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Co nowego"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "O..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Usuń model"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Wyśrodkuj model na platformie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Grupuj modele"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Rozgrupuj modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Połącz modele"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Powiel model..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Wybierz wszystkie modele"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Wyczyść stół"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Przeładuj wszystkie modele"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Rozłóż Wszystkie Modele na Wszystkie Platformy Robocze"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Ułóż wszystkie modele"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Wybór ułożenia"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Zresetuj wszystkie pozycje modelu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Zresetuj wszystkie przekształcenia modelu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Otwórz plik(i)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nowy projekt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Pokaż folder konfiguracji"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Skonfiguruj widoczność ustawień ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marketplace"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Przeliczone"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ustawienie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Aktualny"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Jednostka"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informacja"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Potwierdź Zmianę Średnicy"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Anuluj Wydruk"
+msgid "Display Name"
+msgstr "Wyświetlana nazwa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Czy na pewno chcesz przerwać drukowanie?"
+msgid "Material Type"
+msgstr "Typ Materiału"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr ""
+msgid "Color"
+msgstr "Kolor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr ""
+msgid "Properties"
+msgstr "Właściwości"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr ""
+msgid "Density"
+msgstr "Gęstość"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr ""
+msgid "Diameter"
+msgstr "Średnica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] ""
-msgstr[1] ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Koszt Filamentu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lista obiektów"
+msgid "Filament weight"
+msgstr "Waga filamentu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Długość Filamentu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Koszt na metr"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Odłącz materiał"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Opis"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informacje dotyczące przyczepności"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktywuj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Stwórz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplikuj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importuj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Eksportuj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Drukarka"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Potwierdź Usunięcie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importuj Materiał"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Udało się zaimportować materiał <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Eksportuj Materiał"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Drukarki"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Zmień nazwę"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profile"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Stwórz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplikuj"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Stwórz profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Podaj nazwę tego profilu."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplikuj profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Zmień nazwę profilu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importuj Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Eksportuj Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Drukarka: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Aktualizuj profil z bieżącymi ustawieniami"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Ustawienia ogólne"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Widoczność ustawienia"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Zaznacz wszystko"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Ogólny"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfejs"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Waluta:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Motyw:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Musisz zrestartować aplikację, aby te zmiany zaczęły obowiązywać."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Tnij automatycznie podczas zmiany ustawień."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatyczne Cięcie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Zachowanie okna edycji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Zaznacz nieobsługiwane obszary modelu na czerwono. Bez wsparcia te obszary nie będą drukowane prawidłowo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Wyświetl zwis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Przenosi kamerę, aby model był w centrum widoku, gdy wybrano model"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Wyśrodkuj kamerę kiedy przedmiot jest zaznaczony"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Czy domyślne zachowanie zoomu powinno zostać odwrócone?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Odwróć kierunek zoomu kamery."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Czy przybliżanie powinno poruszać się w kierunku myszy?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Powiększanie w kierunku myszy nie jest obsługiwane w danej perspektywie."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Przybliżaj w kierunku myszy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Czy modele na platformie powinny być przenoszone w taki sposób, aby nie przecinały się?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Upewnij się, że modele są oddzielone"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Czy modele na platformie powinny być przesunięte w dół, aby dotknęły stołu roboczego?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automatycznie upuść modele na stół roboczy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Pokaż wiadomości ostrzegawcze w czytniku g-code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Wiadomość ostrzegawcza w czytniku g-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Czy warstwa powinna być wymuszona w trybie zgodności?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Wymuszenie widoku warstw w trybie zgodności (wymaga ponownego uruchomienia)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Czy Cura powinna się otwierać w miejscu, w którym została zamknięta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Przywróć pozycję okna przy starcie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Jakiego rodzaju kamery należy użyć do renderowania?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderowanie z kamery: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspektywiczny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Rzut ortograficzny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Otwieranie i zapisywanie plików"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Czy modele powinny być skalowane do wielkości obszaru roboczego, jeśli są zbyt duże?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Skaluj duże modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Model może wydawać się bardzo mały, jeśli jego jednostka jest na przykład w metrach, a nie w milimetrach. Czy takie modele powinny być skalowane?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Skaluj bardzo małe modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Czy modele powinny zostać zaznaczone po załadowaniu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Zaznaczaj modele po załadowaniu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Czy przedrostek oparty na nazwie drukarki powinien być automatycznie dodawany do nazwy zadania?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Dodaj przedrostek maszyny do nazwy zadania"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Czy podsumowanie powinno być wyświetlane podczas zapisu projektu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Pokaż okno podsumowania podczas zapisywaniu projektu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Domyślne zachowanie podczas otwierania pliku projektu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Domyślne zachowanie podczas otwierania pliku projektu: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Zawsze pytaj"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Zawsze otwieraj jako projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Zawsze importuj modele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Kiedy dokonasz zmian w profilu i przełączysz się na inny, zostanie wyświetlone okno z pytaniem, czy chcesz zachować twoje zmiany, czy nie. Możesz też wybrać domyślne zachowanie, żeby to okno już nigdy nie było pokazywane."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profile"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Domyślne zachowanie dla zmienionych ustawień podczas zmiany profilu na inny: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Zawsze odrzucaj wprowadzone zmiany"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Zawsze przenoś wprowadzone zmiany do nowego profilu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Prywatność"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Czy Cura ma sprawdzać dostępność aktualizacji podczas uruchamiania programu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Sprawdź, dostępność aktualizacji podczas uruchamiania"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Czy anonimowe dane na temat wydruku mają być wysyłane do Ultimaker? Uwaga. Żadne modele, adresy IP, ani żadne inne dane osobiste nie będą wysyłane i/lub przechowywane."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Wyślij (anonimowe) informacje o drukowaniu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Więcej informacji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktywuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Zmień nazwę"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Stwórz"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplikuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Eksportuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Drukarka"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Potwierdź Usunięcie"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Czy na pewno chcesz usunąć %1? Nie można tego cofnąć!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importuj Materiał"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie można zaimportować materiału <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Typ widoku"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Udało się zaimportować materiał <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nie podłączono do drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Eksportuj Materiał"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Drukarka nie akceptuje poleceń"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Nie udało się wyeksportować materiału do <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "W naprawie. Sprawdź drukarkę"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Udało się wyeksportować materiał do <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Utracone połączenie z drukarką"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informacja"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Drukowanie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Potwierdź Zmianę Średnicy"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Wstrzymano"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Średnica nowego filamentu została ustawiona na %1mm, i nie jest kompatybilna z bieżącym ekstruderem. Czy chcesz kontynuować?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Przygotowywanie ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Wyświetlana nazwa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Usuń wydruk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Typ Materiału"
+msgid "Abort Print"
+msgstr "Anuluj Wydruk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Kolor"
+msgid "Are you sure you want to abort the print?"
+msgstr "Czy na pewno chcesz przerwać drukowanie?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Właściwości"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Ustawienia wyszukiwania"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Gęstość"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Skopiuj wartość do wszystkich ekstruderów"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Średnica"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Koszt Filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ukryj tę opcję"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Waga filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Nie pokazuj tej opcji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Długość Filamentu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Pozostaw tę opcję widoczną"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Koszt na metr"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
+"\n"
+"Kliknij, aby te ustawienia były widoczne."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ten materiał jest powiązany z %1 i dzieli się niekórymi swoimi właściwościami."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Odłącz materiał"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Wpływać"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Opis"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Pod wpływem"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informacje dotyczące przyczepności"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ustawienia druku"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Stwórz"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"To ustawienie ma inną wartość niż w profilu.\n"
+"\n"
+"Kliknij, aby przywrócić wartość z profilu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplikuj"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Stwórz profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Podaj nazwę tego profilu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplikuj profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Zmień nazwę profilu"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importuj Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Eksportuj Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Drukarka: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Aktualizuj profil z bieżącymi ustawieniami"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Odrzuć bieżące zmiany"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ten profil używa ustawień domyślnych określonych przez drukarkę, dlatego nie ma żadnych ustawień z poniższej liście."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Aktualne ustawienia odpowiadają wybranemu profilowi."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Ustawienia ogólne"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Przeliczone"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ustawienie"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
+"\n"
+"Kliknij, aby przywrócić wartość obliczoną."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Widok 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Aktualny"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Widok z przodu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Jednostka"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Widok z góry"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Widoczność ustawienia"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Widok z lewej strony"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Zaznacz wszystko"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Widok z prawej strony"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Ekstruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Docelowa temperatura głowicy. Głowica będzie się rozgrzewać lub chłodzić do tej temperatury. Jeżeli jest równe 0, grzanie głowicy będzie wyłączone."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Aktualna temperatura tej głowicy."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Temperatura do wstępnego podgrzewania głowicy."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Anuluj"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Podgrzewanie wstępne"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Podgrzej głowicę przed drukowaniem. Możesz w dalszym ciągu dostosowywać drukowanie podczas podgrzewania i nie będziesz musiał czekać na podgrzanie głowicy kiedy będziesz gotowy."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Kolor materiału w tym ekstruderze."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Materiał w głowicy drukującej."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Dysza włożona do tego ekstrudera."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Stół roboczy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Temperatura docelowa podgrzewanego stołu. Stół rozgrzeje się lub schłodzi w kierunku tej temperatury. Jeśli ustawione jest 0, grzanie stołu jest wyłączone."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Bieżąca temperatura podgrzewanego stołu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Temperatura do wstępnego podgrzewania stołu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Przed drukowaniem podgrzej stół. W dalszym ciągu można dostosowywać druk podczas nagrzewania, a nie będziesz musiał czekać na rozgrzanie stołu, gdy będziesz gotowy do drukowania."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Kontrola drukarką"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Pozycja Swobodnego Ruchu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Dystans Swobodnego Ruchu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Wyślij G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Wyślij niestandardową komendę G-code do podłączonej drukarki. Naciśnij 'enter', aby wysłać komendę."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Drukarka nie jest podłączona."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Dodaj drukarkę"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Zarządzaj drukarkami"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Podłączone drukarki"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Zdefiniowane drukarki"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktywny wydruk"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Nazwa pracy"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Czas druku"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Szacowany czas pozostały"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+msgid "Is printed as support."
 msgstr ""
-"Niektóre wartości ustawień różnią się od wartości zapisanych w profilu.\n"
-"\n"
-"Kliknij, aby otworzyć menedżer profili."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Profile niestandardowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Nie ma profilu %1 dla konfiguracji w ekstruderze %2. Zamiast tego zostaną użyte domyślne cale"
-msgstr[1] "Nie ma profilu %1 dla konfiguracji w ekstruderach %2. Zamiast tego zostaną użyte domyślne cale"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Ustawienia druku niedostępne. Plik .gcode nie może być modyfikowany."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Polecane"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Niestandardowe"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Wł"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Wył"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Experimental"
-msgstr "Eksperymentalne"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Przyczepność"
+msgid "Other models overlapping with this model are modified."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Włącz drukowanie obrysu lub tratwy. Spowoduje to dodanie płaskiej powierzchni wokół lub pod Twoim obiektem, która jest łatwa do usunięcia po wydruku."
+msgid "Infill overlapping with this model is modified."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Stopniowe wypełnienie"
+msgid "Overlaps with this model are not supported."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
-msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Stopniowe wypełnienie stopniowo zwiększa ilość wypełnień w górę."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Zmodyfikowałeś ustawienia profilu. Jeżeli chcesz je zmienić, przejdź do trybu niestandardowego."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
-msgctxt "@label"
-msgid "Support"
-msgstr "Podpory"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Edytuj"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Generuje podpory wspierające części modelu, które mają zwis. Bez tych podpór takie części mogłyby spaść podczas drukowania."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "&Rozszerzenia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Niektóre ukryte ustawienia używają wartości różniących się od ich normalnej, obliczonej wartości.\n"
-"\n"
-"Kliknij, aby te ustawienia były widoczne."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Preferencje"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "To ustawienie nie jest używane, ponieważ wszystkie ustawienia, na które wpływa, są nadpisane."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "P&omoc"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Wpływać"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nowy projekt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Pod wpływem"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Czy na pewno chcesz rozpocząć nowy projekt? Spowoduje to wyczyszczenie stołu i niezapisanych ustawień."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "To ustawienie jest dzielone pomiędzy wszystkimi ekstruderami. Zmiana tutaj spowoduje zmianę dla wszystkich ekstruderów."
+msgid "This package will be installed after restarting."
+msgstr "Ten pakiet zostanie zainstalowany po ponownym uruchomieniu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ustawienia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
 msgstr ""
-"To ustawienie ma inną wartość niż w profilu.\n"
-"\n"
-"Kliknij, aby przywrócić wartość z profilu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
-msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
 msgstr ""
-"To ustawienie jest zwykle obliczane, ale obecnie ma wartość bezwzględną.\n"
-"\n"
-"Kliknij, aby przywrócić wartość obliczoną."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Ustawienia wyszukiwania"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Skopiuj wartość do wszystkich ekstruderów"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Skopiuj wszystkie zmienione wartości do wszystkich ekstruderów"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ukryj tę opcję"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Nie pokazuj tej opcji"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Pozostaw tę opcję widoczną"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Widok 3D"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Widok z przodu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instaluj pakiety"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Widok z góry"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Otwórz plik(i)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Widok z lewej strony"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Znaleziono jeden lub więcej plików G-code w wybranych plikach. Możesz otwierać tylko jeden plik G-code jednocześnie. Jeśli chcesz otworzyć plik G-code, proszę wybierz tylko jeden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Widok z prawej strony"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Typ widoku"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Co nowego"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr ""
+msgid "Add printer"
+msgstr "Dodaj drukarkę"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Koniec"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Producent"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr ""
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nazwa drukarki"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr ""
+msgid "Manage printers"
+msgstr "Zarządzaj drukarkami"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a printer"
-msgstr "Dodaj drukarkę"
+msgid "Connected printers"
+msgstr "Podłączone drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Dodaj drukarkę sieciową"
+msgid "Preset printers"
+msgstr "Zdefiniowane drukarki"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Dodaj drukarkę niesieciową"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Drukuj Wybrany Model z %1"
+msgstr[1] "Drukuj Wybrane Modele z %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Nie znaleziono drukarki w Twojej sieci."
+msgid "Time estimation"
+msgstr "Szacunkowy czas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Odśwież"
+msgid "Material estimation"
+msgstr "Szacunkowy materiał"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
-msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Dodaj drukarkę przez IP"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
-msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Rozwiązywanie problemów"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Cięcie..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
-msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Dodaj drukarkę przez IP"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nie można pociąć"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+msgctxt "@button"
+msgid "Processing"
+msgstr "Przetwarzanie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Add"
-msgstr "Dodaj"
+msgid "Slice"
+msgstr "Potnij"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nie można połączyć się z urządzeniem."
+msgid "Start the slicing process"
+msgstr "Rozpocznij proces cięcia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr ""
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Anuluj"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Drukarka pod tym adresem jeszcze nie odpowiedziała."
+msgid "No time estimation available"
+msgstr "Szacunkowy czas niedostępny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ta drukarka nie może zostać dodana, ponieważ jest nieznana lub nie jest hostem grupy."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-msgctxt "@button"
-msgid "Back"
-msgstr "Wstecz"
+msgid "No cost estimation available"
+msgstr "Szacunkowy koszt niedostępny"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
 msgctxt "@button"
-msgid "Connect"
-msgstr "Połącz"
+msgid "Preview"
+msgstr "Podgląd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
-msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr ""
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr ""
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Uaktualnij wersję 3.5 do 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
-msgctxt "@button"
-msgid "Skip"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
 msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
-msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Pomóż nam ulepszyć Ultimaker Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura zbiera anonimowe dane w celu poprawy jakości druku i komfortu użytkownika, w tym:"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Typy maszyn"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Zużycie materiału"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Ilość warstw"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ustawienia druku"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Dane zebrane przez Ultimaker Cura nie będą zawierać żadnych prywatnych danych osobowych."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Więcej informacji"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Pusty"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Umowa z użytkownikiem"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Ulepszenie Wersji z 2.2 do 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Odrzuć i zamknij"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Witaj w Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Uaktualnij wersję 4.2 do 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
 msgstr ""
-"Wykonaj poniższe kroki, aby skonfigurować\n"
-"Ultimaker Cura. To zajmie tylko kilka chwil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Rozpocznij"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Co nowego w Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr ""
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Sprawdzacz Modelu"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Ulepszenie Wersji 3.0 do 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Zapewnia wsparcie dla czytania plików 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Czytnik 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Uaktualnij wersję 4.0 do 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF Writer"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Ulepszenie Wersji z 2.6 do 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Zapewnia wsparcie dla czytania plików AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Czytnik AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Ulepszenie Wersji z 2.5 do 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Utwórz kopię zapasową i przywróć konfigurację."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Kopie zapasowe Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Uaktualnij wersję 4.1 do 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Zaplecze CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Ulepszenie Wersji z 2.1 do 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Zapewnia wsparcie dla importowania profili Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Czytnik Profili Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Ulepszenie Wersji z 3.2 do 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura Profile Writer"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Sprawdź aktualizacje oprogramowania."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Sprawdzacz Aktualizacji Oprogramowania"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aktualizacja oprogramowania sprzętowego"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Odczytuje g-code ze skompresowanych archiwum."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Czytnik Skompresowanego G-code"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Ulepszenie Wersji z 3.3 do 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Zapisuje g-code do skompresowanego archiwum."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Zapisywacz Skompresowanego G-code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Uaktualnij wersję 4.3 do 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Czytnik Profili G-code"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Ulepszenie Wersji z 3.4 do 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Czytnik G-code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Ulepszenie Wersji 2.7 do 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Zapisuje g-code do pliku."
+msgid "Provides support for reading AMF files."
+msgstr "Zapewnia wsparcie dla czytania plików AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Zapisywacz G-code"
+msgid "AMF Reader"
+msgstr "Czytnik AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Zapewnia wsparcie dla importowania profili z plików g-code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Czytnik Obrazu"
+msgid "G-code Profile Reader"
+msgstr "Czytnik Profili G-code"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Dostarcza działanie, pozwalające na aktualizację oprogramowania sprzętowego."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Czytnik Profili Starszej Cura"
+msgid "Firmware Updater"
+msgstr "Aktualizacja oprogramowania sprzętowego"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
+msgid "Provides support for reading X3D files."
+msgstr "Zapewnia możliwość czytania plików X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
+msgid "X3D Reader"
+msgstr "Czytnik X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Zapewnia etap monitorowania w Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Etap Monitorowania"
+msgid "Toolbox"
+msgstr "Narzędzia"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5608,375 +5714,357 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Post Processing"
 
-#: PrepareStage/plugin.json
-msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Zapewnia etap przygotowania w Cura."
-
-#: PrepareStage/plugin.json
-msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Etap Przygotowania"
-
-#: PreviewStage/plugin.json
-msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Dostarcza podgląd w Cura."
-
-#: PreviewStage/plugin.json
-msgctxt "name"
-msgid "Preview Stage"
-msgstr "Podgląd"
-
-#: RemovableDriveOutputDevice/plugin.json
-msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Zapewnia wsparcie dla podłączania i zapisywania dysków zewnętrznych."
-
-#: RemovableDriveOutputDevice/plugin.json
-msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Wtyczka Urządzenia Wyjścia Dysku Zewnętrznego"
-
-#: SentryLogger/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Zapewnia połączenie z tnącym zapleczem CuraEngine."
 
-#: SentryLogger/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+msgid "CuraEngine Backend"
+msgstr "Zaplecze CuraEngine"
 
-#: SimulationView/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Zapewnia widok Symulacji."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
 
-#: SimulationView/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Widok Symulacji"
+msgid "USB printing"
+msgstr "Drukowanie USB"
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Zapewnia wsparcie dla eksportowania profili Cura."
 
-#: SliceInfoPlugin/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informacje o cięciu"
+msgid "Cura Profile Writer"
+msgstr "Cura Profile Writer"
 
-#: SolidView/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Zapewnia normalny widok siatki."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
 
-#: SolidView/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Widok Bryły"
+msgid "Ultimaker Network Connection"
+msgstr "Połączenie sieciowe Ultimaker"
 
-#: SupportEraser/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
 
-#: SupportEraser/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Usuwacz Podpór"
+msgid "Ultimaker machine actions"
+msgstr "Czynności maszyny Ultimaker"
 
-#: Toolbox/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Znajdź, zarządzaj i instaluj nowe pakiety Cura."
+msgid "Provides support for reading 3MF files."
+msgstr "Zapewnia wsparcie dla czytania plików 3MF."
 
-#: Toolbox/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Toolbox"
-msgstr "Narzędzia"
+msgid "3MF Reader"
+msgstr "Czytnik 3MF"
 
-#: TrimeshReader/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Zapewnia wsparcie dla czytania plików modeli."
+msgid "Writes g-code to a compressed archive."
+msgstr "Zapisuje g-code do skompresowanego archiwum."
 
-#: TrimeshReader/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Czytnik siatki trójkątów"
+msgid "Compressed G-code Writer"
+msgstr "Zapisywacz Skompresowanego G-code"
 
-#: UFPReader/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
+msgid "Reads g-code from a compressed archive."
+msgstr "Odczytuje g-code ze skompresowanych archiwum."
 
-#: UFPReader/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "Czytnik UFP"
+msgid "Compressed G-code Reader"
+msgstr "Czytnik Skompresowanego G-code"
 
-#: UFPWriter/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Sprawdza możliwe problemy drukowania modeli i konfiguracji wydruku i podaje porady."
 
-#: UFPWriter/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "Zapisywacz UFP"
+msgid "Model Checker"
+msgstr "Sprawdzacz Modelu"
 
-#: UltimakerMachineActions/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Zapewnia czynności maszyny dla urządzeń Ultimaker (na przykład kreator poziomowania stołu, wybór ulepszeń itp.)."
+msgid "Checks for firmware updates."
+msgstr "Sprawdź aktualizacje oprogramowania."
 
-#: UltimakerMachineActions/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Czynności maszyny Ultimaker"
+msgid "Firmware Update Checker"
+msgstr "Sprawdzacz Aktualizacji Oprogramowania"
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Zarządza połączeniami z sieciowymi drukarkami Ultimaker."
+msgid "Allows loading and displaying G-code files."
+msgstr "Pozwala na ładowanie i wyświetlanie plików G-code."
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Połączenie sieciowe Ultimaker"
+msgid "G-code Reader"
+msgstr "Czytnik G-code"
 
-#: USBPrinting/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Akceptuje G-Code i wysyła je do drukarki. Wtyczka może też aktualizować oprogramowanie."
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Tworzy siatkę do blokowania drukowania podpór w określonych miejscach"
 
-#: USBPrinting/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Drukowanie USB"
+msgid "Support Eraser"
+msgstr "Usuwacz Podpór"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Ulepsza konfigurację z Cura 2.1 do Cura 2.2."
+msgid "Provides support for reading model files."
+msgstr "Zapewnia wsparcie dla czytania plików modeli."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Ulepszenie Wersji z 2.1 do 2.2"
+msgid "Trimesh Reader"
+msgstr "Czytnik siatki trójkątów"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Ulepsza konfigurację z Cura 2.2 do Cura 2.4."
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Ulepszenie Wersji z 2.2 do 2.4"
+msgid "Sentry Logger"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Ulepsza konfigurację z Cura 2.5 do Cura 2.6."
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Zapewnia obsługę odczytu pakietów formatu Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Ulepszenie Wersji z 2.5 do 2.6"
+msgid "UFP Reader"
+msgstr "Czytnik UFP"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Ulepsza konfigurację z Cura 2.6 do Cura 2.7."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Zapewnia wsparcie dla importowania profili ze starszych wersji Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Ulepszenie Wersji z 2.6 do 2.7"
+msgid "Legacy Cura Profile Reader"
+msgstr "Czytnik Profili Starszej Cura"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Ulepsza konfigurację z Cura 2.7 do Cura 3.0."
+msgid "Provides a prepare stage in Cura."
+msgstr "Zapewnia etap przygotowania w Cura."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Ulepszenie Wersji 2.7 do 3.0"
+msgid "Prepare Stage"
+msgstr "Etap Przygotowania"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Ulepsza konfigurację z Cura 3.0 do Cura 3.1."
+msgid "Provides a monitor stage in Cura."
+msgstr "Zapewnia etap monitorowania w Cura."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Ulepszenie Wersji 3.0 do 3.1"
+msgid "Monitor Stage"
+msgstr "Etap Monitorowania"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Ulepsza konfigurację z Cura 3.2 do Cura 3.3."
+msgid "Provides the X-Ray view."
+msgstr "Zapewnia widok rentgena."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Ulepszenie Wersji z 3.2 do 3.3"
+msgid "X-Ray View"
+msgstr "Widok Rentgena"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Ulepsza konfigurację z Cura 3.3 do Cura 3.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Zapewnia wsparcie dla tworzenia plików 3MF."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Ulepszenie Wersji z 3.3 do 3.4"
+msgid "3MF Writer"
+msgstr "3MF Writer"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Ulepsza konfigurację z Cura 3.4 do Cura 3.5."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Zatwierdza anonimowe informację o cięciu. Może być wyłączone w preferencjach."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Ulepszenie Wersji z 3.4 do 3.5"
+msgid "Slice info"
+msgstr "Informacje o cięciu"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Uaktualnia konfiguracje z Cura 3.5 to Cura 4.0."
+msgid "Provides a preview stage in Cura."
+msgstr "Dostarcza podgląd w Cura."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Uaktualnij wersję 3.5 do 4.0"
+msgid "Preview Stage"
+msgstr "Podgląd"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Uaktualnia konfiguracje z Cura 4.0 to Cura 4.1."
+msgid "Provides the Simulation view."
+msgstr "Zapewnia widok Symulacji."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Uaktualnij wersję 4.0 do 4.1"
+msgid "Simulation View"
+msgstr "Widok Symulacji"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Uaktualnia konfiguracje z Cura 4.1 to Cura 4.2."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Zapewnia możliwość zmiany ustawień maszyny (takich jak objętość robocza, rozmiar dyszy itp.)."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Uaktualnij wersję 4.1 do 4.2"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Uaktualnia konfiguracje z Cura 4.2 to Cura 4.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Uaktualnij wersję 4.2 do 4.3"
+msgid "Material Profiles"
+msgstr "Profile Materiału"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Uaktualnia konfiguracje z Cura 4.3 to Cura 4.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Zapewnia normalny widok siatki."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Uaktualnij wersję 4.3 do 4.4"
+msgid "Solid View"
+msgstr "Widok Bryły"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides support for importing Cura profiles."
+msgstr "Zapewnia wsparcie dla importowania profili Cura."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "Cura Profile Reader"
+msgstr "Czytnik Profili Cura"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Zapewnia wsparcie dla zapisywania Pakietów Formatów Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
+msgid "UFP Writer"
+msgstr "Zapisywacz UFP"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
+msgid "Writes g-code to a file."
+msgstr "Zapisuje g-code do pliku."
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
+msgid "G-code Writer"
+msgstr "Zapisywacz G-code"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Włącza możliwość generowania drukowalnej geometrii z pliku obrazu 2D."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
+msgid "Image Reader"
+msgstr "Czytnik Obrazu"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgid "Backup and restore your configuration."
+msgstr "Utwórz kopię zapasową i przywróć konfigurację."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
-
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Zapewnia możliwość czytania plików X3D."
+msgid "Cura Backups"
+msgstr "Kopie zapasowe Cura"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Czytnik X3D"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Grubość warstwy"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Zapewnia możliwość czytania i tworzenia profili materiałów opartych o XML."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Utwórz konto"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Usuń wybrany model"
+#~ msgstr[1] "Usuń wybrane modele"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Wyśrodkuj wybrany model"
+#~ msgstr[1] "Wyśrodkuj wybrane modele"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Rozmnóż wybrany model"
+#~ msgstr[1] "Rozmnóż wybrane modele"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Profile Materiału"
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Koniec"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Zapewnia widok rentgena."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Wykonaj poniższe kroki, aby skonfigurować\n"
+#~ "Ultimaker Cura. To zajmie tylko kilka chwil."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Widok Rentgena"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Co nowego w Ultimaker Cura"
 
 #~ msgctxt "@info:status"
 #~ msgid "The selected model was too small to load."
diff --git a/resources/i18n/pl_PL/fdmextruder.def.json.po b/resources/i18n/pl_PL/fdmextruder.def.json.po
index 38dcf8f1b6..3da48d4bfe 100644
--- a/resources/i18n/pl_PL/fdmextruder.def.json.po
+++ b/resources/i18n/pl_PL/fdmextruder.def.json.po
@@ -4,9 +4,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Mariusz 'Virgin71' Matłosz <matliks@gmail.com>\n"
 "Language-Team: reprapy.pl\n"
diff --git a/resources/i18n/pl_PL/fdmprinter.def.json.po b/resources/i18n/pl_PL/fdmprinter.def.json.po
index d8ba0e5461..2e1007692a 100644
--- a/resources/i18n/pl_PL/fdmprinter.def.json.po
+++ b/resources/i18n/pl_PL/fdmprinter.def.json.po
@@ -4,9 +4,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-11-15 15:34+0100\n"
 "Last-Translator: Mariusz Matłosz <matliks@gmail.com>\n"
 "Language-Team: Mariusz Matłosz <matliks@gmail.com>, reprapy.pl\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Niedozwolone obszary"
@@ -486,8 +506,8 @@ msgstr "Przesunięcie ekstrudera"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Zastosuj przesunięcie głowicy względem."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Mnożnik szerokości linii na pierwszej warstwie. Zwiększenie może pol
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Powłoka"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Długość ruchu jałowego umieszczonego po wydrukowaniu zewnętrznej ściany, aby lepiej ukryć szew Z."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Ekstruder Górnej Pow. Skóry"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Esktruder używany do drukowania górnej skóry. Używane w multi-ekstruzji."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Warstwy Górnej Pow. Skóry"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Liczba warstw górnej skóry. Zazwyczaj tylko jedna górna warstwa poprawia jakość górnych powierzchni."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Ekstruder Góra/Dół"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Ekstruder używany do drukowania górnej i dolnej skóry. Używane w multi-ekstruzji."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Grubość Góra/Dół"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Grubość górnej/dolnej warstwy wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw górnych/dolnych."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Grubość Góra"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Grubość górnych warstw na wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw górnych."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Górne warstwy"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Liczba górnych warstw. Przy obliczaniu górnej grubości wartość ta jest zaokrąglana do liczby całkowitej."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Grubość Dołu"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Grubość dolnych warstw w wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw dolnych."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Dolne Warstwy"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Liczba dolnych warstw. Przy obliczaniu grubości dołu ta wartość jest zaokrąglana do liczby całkowitej."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Początkowej warstwy dolne"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Liczba początkowych dolnych warstw, od stołu w górę. Obliczona na podstawie grubości spodu, wartość ta jest zaokrąglana do liczby całkowitej."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Wzór Góra/Dół"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Wzór górnej/dolnej warstwy."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linie"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Koncentryczny"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zygzak"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Wzór Dolnej Początkowej Warstwy"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Wzór na pierwszej warstwie na dole wydruku."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linie"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Koncentryczny"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zygzak"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Połącz Górne/Dolne Wieloboki"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Połącz górne/dolne ścieżki, które przebiegają koło siebie. Włączenie tej opcji powoduje ograniczenie czasu ruchów jałowych dla wzorca koncentrycznego, ale ze względu na możliwość pojawienia się połączeń w połowie ścieżki wypełnienia, opcja ta może obniżyć jakość górnego wykończenia."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Kierunki Linii Góra/Dół"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Lista całkowitych kierunków linii używana kiedy górne/dolne warstwy używają wzoru linii i zygzaka. Elementy z listy są używane kolejno w miarę postępu warstw, a kiedy kończy się lista, zaczyna się od początku. Elementy listy są oddzielone przecinkami, a cała lista znajduje się w nawiasach kwadratowych. Domyślnie lista jest pusta, co oznacza tradycyjne, domyślne kąty (45 i 135 stopni)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Wkład Zew. Ściany"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Kiedy włączone, współrzędne szwu są względne do każdego środka części. Kiedy wyłączone, współrzędne opisują bezwzględną pozycję na stole."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Ekstruder Górnej Pow. Skóry"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Esktruder używany do drukowania górnej skóry. Używane w multi-ekstruzji."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Warstwy Górnej Pow. Skóry"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Liczba warstw górnej skóry. Zazwyczaj tylko jedna górna warstwa poprawia jakość górnych powierzchni."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Ekstruder Góra/Dół"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Ekstruder używany do drukowania górnej i dolnej skóry. Używane w multi-ekstruzji."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Grubość Góra/Dół"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Grubość górnej/dolnej warstwy wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw górnych/dolnych."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Grubość Góra"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Grubość górnych warstw na wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw górnych."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Górne warstwy"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Liczba górnych warstw. Przy obliczaniu górnej grubości wartość ta jest zaokrąglana do liczby całkowitej."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Grubość Dołu"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Grubość dolnych warstw w wydruku. Ta wartość podzielona przez wysokość warstwy definiuje liczbę warstw dolnych."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Dolne Warstwy"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Liczba dolnych warstw. Przy obliczaniu grubości dołu ta wartość jest zaokrąglana do liczby całkowitej."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Początkowej warstwy dolne"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Liczba początkowych dolnych warstw, od stołu w górę. Obliczona na podstawie grubości spodu, wartość ta jest zaokrąglana do liczby całkowitej."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Wzór Góra/Dół"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Wzór górnej/dolnej warstwy."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linie"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Koncentryczny"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zygzak"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Wzór Dolnej Początkowej Warstwy"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Wzór na pierwszej warstwie na dole wydruku."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linie"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Koncentryczny"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zygzak"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Połącz Górne/Dolne Wieloboki"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Połącz górne/dolne ścieżki, które przebiegają koło siebie. Włączenie tej opcji powoduje ograniczenie czasu ruchów jałowych dla wzorca koncentrycznego, ale ze względu na możliwość pojawienia się połączeń w połowie ścieżki wypełnienia, opcja ta może obniżyć jakość górnego wykończenia."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Kierunki Linii Góra/Dół"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Lista całkowitych kierunków linii używana kiedy górne/dolne warstwy używają wzoru linii i zygzaka. Elementy z listy są używane kolejno w miarę postępu warstw, a kiedy kończy się lista, zaczyna się od początku. Elementy listy są oddzielone przecinkami, a cała lista znajduje się w nawiasach kwadratowych. Domyślnie lista jest pusta, co oznacza tradycyjne, domyślne kąty (45 i 135 stopni)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Brak wypełnienia w lukach osi Z"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Dostosuj zachodzenie pomiędzy ścianami, a (punktami końcowymi) linią obrysu. Niewielkie zachodzenie na siebie pozwala ścianom połączyć się mocno z obrysem. Zauważ, że przy równej szerokości obrysu i szerokości ściany, każdy procent powyżej 50% może spowodować przekroczenie ściany przez obrys, ponieważ pozycja dyszy ekstrudera obrysu może sięgać poza środek ściany."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Szerokość Usuwania Skóry"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Największa szerokość pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie górnych/dolnych skór na pochyłych powierzchniach modelu."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Szer. Usuwania Górnej Skóry"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Największa szerokość górnej pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie górnych skór na pochyłych powierzchniach modelu."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Szer. Usuwania Dolnej Skóry"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Największa szerokość dolnych pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie dolnych skór na pochyłych powierzchniach modelu."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Odległość Rozsz. Skóry"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Odległość na jaką skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Odległość Rozsz. Górnej Skóry"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Odległość na jaką górne skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Odległość Rozsz. Dolnej Skóry"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Odległość na jaką dolne skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Maks. Kąt Rozciągania Ścian"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Min. Szerok. Skóry do Poszerzenia"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Obszary skóry, które są węższe niż to, nie zostaną poszerzone. W ten sposób unikamy rozszerzania wąskich skór, które są tworzone, kiedy powierzchnia jest blisko pionowi."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Wypełnienie"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Minimalny kąt zwisu wewnętrznego, dla którego zostanie dodane wypełnienie. Przy wartości 0° obiekty zostaną wypełnione całkowicie, natomiast przy 90° wypełnienie nie zostanie wygenerowane."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Szerokość Usuwania Skóry"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Największa szerokość pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie górnych/dolnych skór na pochyłych powierzchniach modelu."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Szer. Usuwania Górnej Skóry"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Największa szerokość górnej pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie górnych skór na pochyłych powierzchniach modelu."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Szer. Usuwania Dolnej Skóry"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Największa szerokość dolnych pow. skóry, które mają zostać usunięte. Każda pow. skóry mniejsza niż ta wartość zniknie. Może to pomóc w ograniczeniu ilości czasu i materiału zużywanego na drukowanie dolnych skór na pochyłych powierzchniach modelu."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Odległość Rozsz. Skóry"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Odległość na jaką skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Odległość Rozsz. Górnej Skóry"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Odległość na jaką górne skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Odległość Rozsz. Dolnej Skóry"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Odległość na jaką dolne skóry są rozszerzane w kierunku wypełnienia. Wyższe wartości powodują lepsze łączenie się skóry i wypełnienia i powodują, że ściany sąsiednich warstw lepiej łączą się ze skórą. Niższe wartości oszczędzają materiał."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Maks. Kąt Rozciągania Ścian"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Górne i/lub dolne powierzchnie przedmiotu o kącie większym niż to ustawienie nie będą miały rozszerzonego górnej/dolnej skóry. Pozwala to uniknąć powiększania wąskich ścian, które powstają, gdy powierzchnia modelu ma blisko pionowe nachylenie. Kąt 0 ° jest poziomy, a kąt 90 ° jest pionowy."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Min. Szerok. Skóry do Poszerzenia"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Obszary skóry, które są węższe niż to, nie zostaną poszerzone. W ten sposób unikamy rozszerzania wąskich skór, które są tworzone, kiedy powierzchnia jest blisko pionowi."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr ""
@@ -2560,8 +2590,8 @@ msgstr "Prędk. Początk. Warstwy"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Prędkość dla pierwszej warstwy. Niższa wartość jest zalecane w celu poprawy przyczepności do stołu."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,7 +5104,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -5423,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Maksymalny kąt zwisów po którym będą one drukowalne. Przy wartości 0 ° wszystkie zwisy są zastępowane przez fragment modelu połączony ze stołem, a 90 ° w żaden sposób nie zmienia modelu."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Włącz Wypływanie"
@@ -6361,6 +6401,22 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Forma przesunięcia, która ma być zastosowana do modelu podczas ładowania z pliku."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Zastosuj przesunięcie głowicy względem."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Powłoka"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Górne i/lub dolne powierzchnie przedmiotu o kącie większym niż to ustawienie nie będą miały rozszerzonego górnej/dolnej skóry. Pozwala to uniknąć powiększania wąskich ścian, które powstają, gdy powierzchnia modelu ma blisko pionowe nachylenie. Kąt 0 ° jest poziomy, a kąt 90 ° jest pionowy."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Prędkość dla pierwszej warstwy. Niższa wartość jest zalecane w celu poprawy przyczepności do stołu."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Temperatura stosowana dla podgrzewanej platformy roboczej. Jeżeli jest ustawione 0, temperatura stołu nie będzie ustawiona."
diff --git a/resources/i18n/pt_BR/cura.po b/resources/i18n/pt_BR/cura.po
index 7f69fdf283..f532ab4a11 100644
--- a/resources/i18n/pt_BR/cura.po
+++ b/resources/i18n/pt_BR/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-10-25 13:00+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 "X-Generator: Poedit 2.2.3\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconhecido"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Carregando máquinas..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "As impressoras abaixo não podem ser conectadas por serem parte de um grupo"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Ajustando preferências..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impressoras de rede disponíveis"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Inicializando Máquina Ativa..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Não sobreposto"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Inicializando gestor de máquinas..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Tem certeza que deseja remover {0}? Isto não pode ser defeito!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Inicializando volume de impressão..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Configurando cena..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visual"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Carregando interface..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "O perfil visual é projetado para imprimir protótipos e modelos virtuais com o objetivo de alta qualidade visual e de superfície."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Inicializando motor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engenharia"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "O perfil de engenharia é projetado para imprimir protótipos funcionais e partes de uso final com o objetivo de melhor precisão e tolerâncias mais estritas."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Somente um arquivo G-Code pode ser carregado por vez. Pulando importação de {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Rascunho"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Aviso"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "O perfil de rascunho é projetado para imprimir protótipos iniciais e validações de conceito com o objetivo de redução significativa de tempo de impressão."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Não é possível abrir nenhum outro arquivo se G-Code estiver sendo carregado. Pulando importação de {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Tem certeza que deseja remover {0}? Isto não pode ser defeito!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Material Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Desconhecido"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Perfis personalizados"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Todos Os Tipos Suportados ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Todos Os Arquivos (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Login falhou"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Achando novos lugares para objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Buscando Localização"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visual"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Não foi possível achar um lugar dentro do volume de construção para todos os objetos"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "O perfil visual é projetado para imprimir protótipos e modelos virtuais com o objetivo de alta qualidade visual e de superfície."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Não Foi Encontrada Localização"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engenharia"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Não pude criar arquivo do diretório de dados de usuário: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "O perfil de engenharia é projetado para imprimir protótipos funcionais e partes de uso final com o objetivo de melhor precisão e tolerâncias mais estritas."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Rascunho"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentativa de restauração de backup do Cura sem dados ou metadados apropriados."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "O perfil de rascunho é projetado para imprimir protótipos iniciais e validações de conceito com o objetivo de redução significativa de tempo de impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativa de restauração de backup do Cura de versão maior que a atual."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "As impressoras abaixo não podem ser conectadas por serem parte de um grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "A altura do volume de impressão foi reduzida para que o valor da \"Sequência de Impressão\" impeça o eixo de colidir com os modelos impressos."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Impressoras de rede disponíveis"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume de Impressão"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Não sobreposto"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "O Cura não consegue iniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>Por favor nos envie este Relatório de Falha para consertar o problema.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Enviar relatório de falha à Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Exibir relatório de falha detalhado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Mostrar a pasta de configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Salvar e Restabelecer Configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Relatório de Problema"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1124 +249,780 @@ msgstr ""
 "            <p>Por favor use o botão \"Enviar relatório\" para publicar um relatório de erro automaticamente em nossos servidores</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informação do Sistema"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Desconhecida"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Versão do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Linguagem do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Linguagem do SO"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plataforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Versão do Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Versão do PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Ainda não inicializado<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Versão da OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Fornecedor da OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Renderizador da OpenGL: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Traceback do erro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Registros"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Enviar relatório"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Carregando máquinas..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Ajustando preferências..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Inicializando Máquina Ativa..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Inicializando gestor de máquinas..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Inicializando volume de impressão..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Configurando cena..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Carregando interface..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Inicializando motor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Somente um arquivo G-Code pode ser carregado por vez. Pulando importação de {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Aviso"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Não é possível abrir nenhum outro arquivo se G-Code estiver sendo carregado. Pulando importação de {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erro"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicando e colocando objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Colocando Objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Colocando Objeto"
+msgid "Login failed"
+msgstr "Login falhou"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Não foi possível ler a resposta."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Não foi possível iniciar processo de sign-in. Verifique se outra tentativa de sign-in ainda está ativa."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Não foi possível contactar o servidor de contas da Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "O estado provido não está correto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Por favor dê as permissões requeridas ao autorizar esta aplicação."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Algo inesperado aconteceu ao tentar login, por favor tente novamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Não foi possível iniciar processo de sign-in. Verifique se outra tentativa de sign-in ainda está ativa."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Não foi possível contactar o servidor de contas da Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "O Arquivo Já Existe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "O arquivo <filename>{0}</filename> já existe. Tem certeza que quer sobrescrevê-lo?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de arquivo inválida:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Bico"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Os ajustes foram alterados para seguir a disponibilidade de extrusores atuais:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ajustes atualizados"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusor(es) Desabilitado(s)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Falha ao exportar perfil para <filename>{0}</filename>: complemento escritor relatou erro."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Perfil exportado para <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Exportação concluída"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Não foi possível importar perfil de <filename>{0}</filename> antes de uma impressora ser adicionada."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Não há perfil personalizado a importar no arquivo <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Este perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Erro ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Perfil {0} importado com sucesso."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Arquivo {0} não contém nenhum perfil válido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "O Perfil {0} tem tipo de arquivo desconhecido ou está corrompido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Perfil personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Falta um tipo de qualidade ao Perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "A pilha global não foi encontrada."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Não foi possível adicionar o perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Tipo de qualidade '{0}' não é compatível com a definição de máquina ativa atual '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Alerta: o perfil não está visível porque seu tipo de qualidade '{0}' não está disponível para a configuração atual. Altere para uma combinação de material/bico que possa usar este tipo de qualidade."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Não Suportado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Bico"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Os ajustes foram alterados para seguir a disponibilidade de extrusores atuais:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Achando novos lugares para objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ajustes atualizados"
+msgid "Finding Location"
+msgstr "Buscando Localização"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Não foi possível achar um lugar dentro do volume de construção para todos os objetos"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusor(es) Desabilitado(s)"
+msgid "Can't Find Location"
+msgstr "Não Foi Encontrada Localização"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grupo #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Finalizar"
+msgid "Close"
+msgstr "Fechar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Next"
+msgstr "Próximo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupo #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Finalizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Parede Externa"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Paredes Internas"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Contorno"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Preenchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Preenchimento de Suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interface de Suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt (Saia)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Torre de Prime"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Percurso"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retrações"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Outros"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Próximo"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Fechar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente de Modelo 3D"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Um ou mais modelos 3D podem não ser impressos otimamente devido ao tamanho e configuração de material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Descubra como assegurar a melhor qualidade de impressão e confiabilidade possível.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guia de qualidade de impressão</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "O arquivo de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não foi possível importar a máquina. Os modelos serão importados ao invés dela."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir Arquivo de Projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "O arquivo de projeto <filename>{0}</filename> tornou-se subitamente inacessível: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Não Foi Possível Abrir o Arquivo de Projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "O arquivo de projeto <filename>{0}</filename> foi feito usando perfis que são desconhecidos para esta versão do Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Arquivo 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "O complemento de Escrita 3MF está corrompido."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Sem permissão para gravar o espaço de trabalho aqui."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "O sistema operacional não permite salvar um arquivo de projeto nesta localização ou com este nome de arquivo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Erro ao escrever arquivo 3mf."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Arquivo 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Arquivo de Projeto 3MF do Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Arquivo AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "A altura do volume de impressão foi reduzida para que o valor da \"Sequência de Impressão\" impeça o eixo de colidir com os modelos impressos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Backups"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Houve um erro ao transferir seu backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Criando seu backup..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Houve um erro ao criar seu backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Enviando seu backup..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Seu backup terminou de ser enviado."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "O backup excede o tamanho máximo de arquivo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Houve um erro ao tentar restaurar seu backup."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gerenciar backups"
+msgid "Build Volume"
+msgstr "Volume de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Não foi possível fatiar com o material atual visto que é incompatível com a máquina ou configuração selecionada."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Não pude criar arquivo do diretório de dados de usuário: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Não foi possível fatiar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Não foi possível fatiar com os ajustes atuais. Os seguintes ajustes têm erros: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Não foi possível fatiar devido a alguns ajustes por modelo. Os seguintes ajustes têm erros em um dos modelos ou mais: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Não foi possível fatiar porque a torre de purga ou posição de purga são inválidas."
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Não foi possível fatiar porque há objetos associados com o Extrusor desabilitado %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentativa de restauração de backup do Cura sem dados ou metadados apropriados."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Por favor revise os ajustes e verifique se seus modelos:\n"
-"- Cabem dentro do volume de impressão\n"
-"- Estão associados a um extrusor habilitado\n"
-"- Não estão todos configurados como malhas de modificação"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativa de restauração de backup do Cura de versão maior que a atual."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Processando Camadas"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicando e colocando objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informação"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil do Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Não foi possível acessar informação de atualização."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Novos recursos ou consertos de bugs podem estar disponível para sua {machine_name}! Se já não estiver na última versão, é recomendado que atualize o firmware da sua impressora para a versão {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Novo firmware de %s disponível"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Como atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Atualizar Firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Arquivo de G-Code Comprimido"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "O GCodeGzWriter não suporta modo binário."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Arquivo G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Interpretando G-Code"
+msgid "Placing Objects"
+msgstr "Colocando Objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Detalhes do G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Certifique que o g-code é adequado para sua impressora e configuração antes de enviar o arquivo. A representação de g-code pode não ser acurada."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Arquivo G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "O GCodeWriter não suporta modo binário."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Por favor prepare o G-Code antes de exportar."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagem JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagem JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagem PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagem BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagem GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfis do Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Ajustes da Máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Ajustes por Modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar ajustes por Modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Pós-Processamento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Pré-visualização"
+msgid "Placing Object"
+msgstr "Colocando Objeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Salvar em Unidade Removível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Salvar em Unidade Removível {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Não há formatos de arquivo disponíveis com os quais escrever!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Salvando na Unidade Removível <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Salvando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Não foi possível salvar em <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Não foi possível encontrar nome de arquivo ao tentar escrever em {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Não foi possível salvar em unidade removível {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Salvo em Unidade Removível {0} como {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Arquivo Salvo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejetar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejetar dispositivo removível {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} ejetado. A unidade agora pode ser removida de forma segura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Remover Hardware com Segurança"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Erro ao ejetar {0}. Outro programa pode estar usando a unidade."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Unidade Removível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "O Cura não exibe camadas de forma precisa quando Impressão em Arame está habilitada."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Visão Simulada"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Nada está exibido porque você precisa fatiar primeiro."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Não há camadas a exibir"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Não mostrar essa mensagem novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Visão de Camadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Seu modelo não é manifold. As áreas ressaltadas indicam superfícies faltantes ou incorretas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Erros de modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Visão sólida"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Bloqueador de Suporte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Cria um volume em que os suportes não são impressos."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Você quer sincronizar os pacotes de material e software com sua conta?"
+msgid "AMF File"
+msgstr "Arquivo AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Alterações detectadas de sua conta Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Arquivo G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Atualizar Firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Sincronizando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Arquivo X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Recusar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Concordar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Acordo de Licença do Complemento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Recusar e remover da conta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} complementos falharam em baixar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Sincronizando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Alterações detectadas de sua conta Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Você precisa sair e reiniciar {} para que as alterações tenham efeito."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} complementos falharam em baixar"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Você quer sincronizar os pacotes de material e software com sua conta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "Câmbio de Ativos Digitais COLLADA"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Ajustes por Modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "Binário glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar ajustes por Modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "JSON Embutido glTF"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Pós-Processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Formato de Triângulos de Stanford"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Câmbio de Ativos Digitais COLLADA Comprimido"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Não foi possível fatiar com o material atual visto que é incompatível com a máquina ou configuração selecionada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Pacote de Formato da Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Não foi possível fatiar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Não foi possível escrever no arquivo UFP:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Não foi possível fatiar com os ajustes atuais. Os seguintes ajustes têm erros: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar mesa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Não foi possível fatiar devido a alguns ajustes por modelo. Os seguintes ajustes têm erros em um dos modelos ou mais: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Selecionar Atualizações"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Não foi possível fatiar porque a torre de purga ou posição de purga são inválidas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir pela nuvem"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Não foi possível fatiar porque há objetos associados com o Extrusor desabilitado %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir pela nuvem"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Por favor revise os ajustes e verifique se seus modelos:\n"
+"- Cabem dentro do volume de impressão\n"
+"- Estão associados a um extrusor habilitado\n"
+"- Não estão todos configurados como malhas de modificação"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Conectado pela nuvem"
+msgid "Processing Layers"
+msgstr "Processando Camadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de erro desconhecido ao transferir trabalho de impressão: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informação"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impressão USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir pela USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir pela USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Conectado via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Uma impressão USB está em progresso, fechar o Cura interromperá esta impressão. Tem certeza?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Uma impressão ainda está em progresso. O Cura não pode iniciar outra impressão via USB até que a impressão anterior tenha completado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impressão em Progresso"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Conectar pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nova impressora detectada na sua conta Ultimaker"
 msgstr[1] "Novas impressoras detectadas na sua conta Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Adicionando impressora {name} ({model}) da sua conta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1361,71 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} outra"
 msgstr[1] "... e {0} outras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impressoras adicionadas da Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Conexão de nuvem não está disponível para uma impressora."
 msgstr[1] "Conexão de nuvem não está disponível para algumas impressoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impressora não está ligada à Digital Factory:"
 msgstr[1] "Estas impressoras não estão ligadas à Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para estabelecer uma conexão, por favor visite o {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Manter configurações da impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Remover impressoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} será removida até a próxima sincronização de conta."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para remover {printer_name} permanentemente, visite {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Tem certeza que quer remover {printer_name} temporariamente?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Remover impressoras?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1441,7 +1110,7 @@ msgstr[1] ""
 "Você está prestes a remover {0} impressoras do Cura. Esta ação não pode ser desfeita.\n"
 "Tem certeza que quer continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1450,2154 +1119,2487 @@ msgstr ""
 "Você está prestes a remover todas as impressoras do Cura. Esta ação não pode ser desfeita.\n"
 "Tem certeza que quer continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Envia e monitora trabalhos de impressão de qualquer lugar usando sua conta Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir pela nuvem"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Conectar à Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir pela nuvem"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Começar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Conectado pela nuvem"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de erro desconhecido ao transferir trabalho de impressão: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Você está tentando conectar a uma impressora que não está rodando Ultimaker Connect. Por favor atualiza a impressora para o firmware mais recente."
+msgid "tomorrow"
+msgstr "amanhã"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Atualize sua impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoje"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "O Cura detectou perfis de material que não estão instalados ainda na impressora host do grupo {0}."
+msgid "Sending Print Job"
+msgstr "Enviando Trabalho de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviando material para a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Transferindo trabalho de impressão para a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Você está tentando conectar a {0} mas ele não é host de um grupo. Você pode visitar a página web para configurá-lo como host de grupo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Não é host de grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurar grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Envia e monitora trabalhos de impressão de qualquer lugar usando sua conta Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Conectar à Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Começar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Por favor espere até que o trabalho atual tenha sido enviado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erro de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Não foi possível transferir os dados para a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Erro de rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Enviando Trabalho de Impressão"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "O Cura detectou perfis de material que não estão instalados ainda na impressora host do grupo {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Transferindo trabalho de impressão para a impressora."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Enviando material para a impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "A fila de trabalhos de impressão está cheia. A impressora não pode aceitar novo trabalho."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Fila Cheia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Trabalho de impressão enviado à impressora com sucesso."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dados Enviados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Você está tentando conectar a uma impressora que não está rodando Ultimaker Connect. Por favor atualiza a impressora para o firmware mais recente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Atualize sua impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimir pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprime pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Conectado pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Conectar pela rede"
+msgid "Select upgrades"
+msgstr "Selecionar Atualizações"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "amanhã"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar mesa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "hoje"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impressão USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir pela USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "O arquivo de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não foi possível importar a máquina. Os modelos serão importados ao invés dela."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir pela USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir Arquivo de Projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Conectado via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "O arquivo de projeto <filename>{0}</filename> tornou-se subitamente inacessível: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Uma impressão USB está em progresso, fechar o Cura interromperá esta impressão. Tem certeza?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Não Foi Possível Abrir o Arquivo de Projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Uma impressão ainda está em progresso. O Cura não pode iniciar outra impressão via USB até que a impressão anterior tenha completado."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impressão em Progresso"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "O arquivo de projeto <filename>{0}</filename> foi feito usando perfis que são desconhecidos para esta versão do Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Arquivo X3D"
+msgid "3MF File"
+msgstr "Arquivo 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Visão de Raios-X"
+msgid "Compressed G-code File"
+msgstr "Arquivo de G-Code Comprimido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Algumas coisas podem ser problemáticas nesta impressão. Clique para ver dicas de correção."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "O GCodeGzWriter não suporta modo binário."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir Projeto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente de Modelo 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Atualizar existentes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Um ou mais modelos 3D podem não ser impressos otimamente devido ao tamanho e configuração de material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Descubra como assegurar a melhor qualidade de impressão e confiabilidade possível.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver guia de qualidade de impressão</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Criar novos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Não foi possível acessar informação de atualização."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumo - Projeto do Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Novos recursos ou consertos de bugs podem estar disponível para sua {machine_name}! Se já não estiver na última versão, é recomendado que atualize o firmware da sua impressora para a versão {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Ajustes da impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Novo firmware de %s disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Como o conflito na máquina deve ser resolvido?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Como atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Arquivo G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo de Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Interpretando G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Ajustes de perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Detalhes do G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Certifique que o g-code é adequado para sua impressora e configuração antes de enviar o arquivo. A representação de g-code pode não ser acurada."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Bloqueador de Suporte"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Como o conflito no perfil deve ser resolvido?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Cria um volume em que os suportes não são impressos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Objetivo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "Câmbio de Ativos Digitais COLLADA"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Ausente no perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "Binário glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 sobreposto"
-msgstr[1] "%1 sobrepostos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "JSON Embutido glTF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Formato de Triângulos de Stanford"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 sobreposição"
-msgstr[1] "%1, %2 sobreposições"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Câmbio de Ativos Digitais COLLADA Comprimido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Ajustes de material"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Pacote de Formato da Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Como o conflito no material deve ser resolvido?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfis do Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidade dos ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Ajustes visíveis:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Visão de Raios-X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Erro ao escrever arquivo 3mf."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Carregar um projeto limpará todos os modelos da mesa de impressão."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Arquivo 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Arquivo de Projeto 3MF do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Quer mais?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "O complemento de Escrita 3MF está corrompido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Backup Agora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Sem permissão para gravar o espaço de trabalho aqui."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Auto Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "O sistema operacional não permite salvar um arquivo de projeto nesta localização ou com este nome de arquivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Criar um backup automaticamente toda vez que o Cura iniciar."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Pré-visualização"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Visão de Camadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Apagar o Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "O Cura não exibe camadas de forma precisa quando Impressão em Arame está habilitada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Você tem certeza que deseja apagar este backup? Isto não pode ser desfeito."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Visão Simulada"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar Backup"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Nada está exibido porque você precisa fatiar primeiro."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Você precisará reiniciar o Cura antes que seu backup seja restaurado. Deseja fechar o Cura agora?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Não há camadas a exibir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versão do Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Não mostrar essa mensagem novamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Ajustes da Máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiais"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Visão sólida"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfis"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Complementos"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Backups do Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Meus backups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Não foi possível escrever no arquivo UFP:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Você não tem nenhum backup atualmente. Use o botão 'Backup Agora' para criar um."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "O GCodeWriter não suporta modo binário."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante a fase de pré-visualização, você estará limitado a 5 backups visíveis. Remova um backup para ver os mais antigos."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Por favor prepare o G-Code antes de exportar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Fazer backup e sincronizar os ajustes do Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagem JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Entrar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagem JPEG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Imagem PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Imagem BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagem GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Houve um erro ao tentar restaurar seu backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Houve um erro ao transferir seu backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Criando seu backup..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Houve um erro ao criar seu backup."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Enviando seu backup..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Seu backup terminou de ser enviado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "O backup excede o tamanho máximo de arquivo."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gerenciar backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Atualizar Firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "O firmware é o software rodando diretamente no maquinário de sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e é o que faz a sua impressora funcionar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "O firmware que já vêm embutido nas novas impressoras funciona, mas novas versões costumam ter mais recursos, correções e melhorias."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automaticamente atualizar Firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Carregar Firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "O firmware não pode ser atualizado porque não há conexão com a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "O firmware não pode ser atualizado porque a conexão com a impressora não suporta atualização de firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Selecionar firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Atualização do Firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Atualizando firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Atualização do Firmware completada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "A atualização de Firmware falhou devido a um erro desconhecido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "A atualização de firmware falhou devido a um erro de comunicação."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "A atualização de firmware falhou devido a um erro de entrada e saída."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "A atualização de firmware falhou devido a firmware não encontrado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converter imagem..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "A distância máxima de cada pixel da \"Base\"."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Você precisa aceitar a licença para que o pacote possa ser instalado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Alterações da sua conta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "A altura-base da mesa de impressão em milímetros."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Dispensar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Próximo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A largura da mesa de impressão em milímetros."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Os seguintes pacotes serão adicionados:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Os seguintes pacotes não podem ser instalados por incompatibilidade de versão do Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A profundidade da mesa de impressão em milímetros"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Confirme a desinstalação"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidade (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Você está desinstalando material e/ou perfis que ainda estão em uso. Confirmar irá restaurar os materiais e perfis seguintes a seus defaults."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para litofanos, pixels escuros devem corresponder a locais mais espessos para conseguir bloquear mais luz. Para mapas de altura, pixels mais claros significam terreno mais alto, portanto tais pixels devem corresponder a locais mais espessos no modelo 3d gerado."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Mais escuro é mais alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Mais claro é mais alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Confirmar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Para litofanos, um modelo logarítmico simples para translucidez está disponível. Para mapas de altura os valores de pixels correspondem a alturas, linearmente."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Não foi possível conectar-se à base de dados de Pacotes do Cura. Por favor verifique sua conexão."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contribuições da Comunidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Complementos da Comunidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "A porcentagem de luz penetrando uma impressão com espessura de 1 milímetro. Abaixar este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Materiais Genéricos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmitância de 1mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A quantidade de suavização para aplicar na imagem."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Última atualização"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavização"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Ok"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Downloads"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Installed plugins"
+msgstr "Complementos instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Ajustes do Bico"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Nenhum complemento foi instalado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamanho do bico"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Materiais instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Nenhum material foi instalado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diâmetro de material compatível"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Complementos empacotados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Deslocamento X do Bico"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Materiais empacotados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Deslocamento Y do Bico"
+msgid "Website"
+msgstr "Sítio Web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número da Ventoinha de Resfriamento"
+msgid "Email"
+msgstr "Email"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-Code Inicial do Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Por favor se logue para adquirir complementos e materiais verificados para o Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-Code Final do Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Entrar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Ajustes de Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Obtendo pacotes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (largura)"
+msgid "Compatibility"
+msgstr "Compatibilidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profundidade)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altura)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Plataforma de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma da plataforma de impressão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origem no centro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Mesa aquecida"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Documento de Dados Técnicos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de construção aquecido"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Documento de Dados de Segurança"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Sabor de G-Code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Diretrizes de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Ajustes da Cabeça de Impressão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Sítio Web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Complementos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X máx."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Instalado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Ir ao Mercado Web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura do Eixo"
+msgid "Will install upon restarting"
+msgstr "Será instalado ao reiniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de Extrusores"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-Code Inicial"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Atualizando"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-Code Final"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Atualizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Por favor certifique-se que sua impressora está conectada>\n"
-"- Verifique se ela está ligada.\n"
-"- Verifique se ela está conectada à rede.\n"
-"- Verifique se você está logado para descobrir impressoras conectadas à nuvem."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Entrar</a> na conta é necessário para atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgrade"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Desinstalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Instalado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Entrar</a> na conta é necessário para instalar ou atualizar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Comprar rolos de material</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Buscar materiais"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Por favor conecte sua impressora à rede."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Você precisará reiniciar o Cura para que as alterações tenham efeito."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuais de usuário online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sair de %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Voltar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Instalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Tipo de Malha"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modelo normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimir como suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modificar ajustes para sobreposições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Não suportar sobreposições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Somente malha de preenchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Malha de corte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Selecionar ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Selecionar Ajustes a Personalizar para este modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Exibir tudo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Complemento de Pós-Processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts de Pós-Processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Adicionar um script"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Alterar scripts de pós-processamento ativos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "O seguinte script está ativo:"
 msgstr[1] "Os seguintes scripts estão ativos:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Esquema de Cores"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Cor do Material"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de Linha"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Largura de camada"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo de Compatibilidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Percursos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Helpers"
-msgstr "Assistentes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Perímetro"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Preenchimento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Somente Exibir Camadas Superiores"
+msgid "Queued"
+msgstr "Enfileirados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Exibir 5 Camadas Superiores Detalhadas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gerir no navegador"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Topo / Base"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Não há trabalhos de impressão na fila. Fatie e envie um trabalho para adicioná-lo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parede Interna"
+msgid "Print jobs"
+msgstr "Trabalhos de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "mín"
+msgid "Total print time"
+msgstr "Tempo total de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "máx"
+msgid "Waiting for"
+msgstr "Esperando por"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Mais informações em coleção anônima de dados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "O Ultimaker Cura coleta dados anônimos para poder aprimorar a qualidade de impressão e experiência do usuário. Abaixo segue um exemplo de todos os dados que são compartilhados:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Recusar enviar dados anônimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir enviar dados anônimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Voltar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Plataforma de Impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Suporte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Documento de Dados Técnicos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Documento de Dados de Segurança"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Diretrizes de Impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Sítio Web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Entrar</a> na conta é necessário para instalar ou atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Comprar rolos de material</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Atualizando"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Atualizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir ao Mercado Web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Buscar materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Você precisará reiniciar o Cura para que as alterações tenham efeito."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sair de %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Complementos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Será instalado ao reiniciar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Entrar</a> na conta é necessário para atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgrade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+msgid "Configuration Changes"
+msgstr "Alterações de Configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Alterações da sua conta"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Dispensar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Próximo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Os seguintes pacotes serão adicionados:"
+msgid "Override"
+msgstr "Sobrepor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Os seguintes pacotes não podem ser instalados por incompatibilidade de versão do Cura:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirme a desinstalação"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Você está desinstalando material e/ou perfis que ainda estão em uso. Confirmar irá restaurar os materiais e perfis seguintes a seus defaults."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfis"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "A impressora associada, %1, requer a seguinte alteração de configuração:"
+msgstr[1] "A impressora associada, %1, requer as seguintes alterações de configuração:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Você precisa aceitar a licença para que o pacote possa ser instalado"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "A impressora %1 está associada, mas o trabalho contém configuração de material desconhecida."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Sítio Web"
+msgid "Change material %1 from %2 to %3."
+msgstr "Alterar material %1 de %2 para %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "Email"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Carregar %3 como material %1 (isto não pode ser sobreposto)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versão"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Alterar núcleo de impressão %1 de %2 para %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Última atualização"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Alterar mesa de impressão para %1 (Isto não pode ser sobreposto)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Sobrepor irá usar os ajustes especificados com a configuração existente da impressora. Isto pode causar falha da impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+msgid "Glass"
+msgstr "Vidro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuições da Comunidade"
+msgid "Aluminum"
+msgstr "Alumínio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Complementos da Comunidade"
+msgid "Unavailable printer"
+msgstr "Impressora indisponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiais Genéricos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Não foi possível conectar-se à base de dados de Pacotes do Cura. Por favor verifique sua conexão."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Complementos instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Nenhum complemento foi instalado."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiais instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Nenhum material foi instalado."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Complementos empacotados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiais empacotados"
+msgid "First available"
+msgstr "Primeira disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Obtendo pacotes..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Por favor se logue para adquirir complementos e materiais verificados para o Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelamento da mesa de impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Para garantir que suas impressões saiam ótimas, você deve agora ajustar sua mesa de impressão. Quando você clicar em 'Mover para a Posição Seguinte', o bico se moverá para posições diferentes que podem ser ajustadas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posição; insira um pedaço de papel abaixo do bico e ajuste a altura da mesa de impressão. A altura da mesa de impressão está adequada quando o papel for levemente pressionado pela ponta do bico."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar Nivelamento da Mesa de Impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mover pra a Posição Seguinte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Por favor selecionar quaisquer atualizações feitas nesta Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Mesa de Impressão Aquecida (kit Oficial ou auto-construído)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Por favor atualize o firmware de sua impressora parar gerir a fila remotamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Conectar a Impressora de Rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir diretamente na sua impressora pela rede, certifique-se que ela esteja conectada à rede usando um cabo de rede ou conectando sua impressora à sua WIFI. Se você não conectar Cura à sua impressora, você ainda pode usar um drive USB ou SDCard para transferir arquivos G-Code a ela."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecione sua impressora da lista abaixo:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Remover"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se sua impressora não está listada, leia o <a href='%1'>guia de resolução de problemas de impressão em rede</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versão do firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Endereço"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impressora não está configurada para hospedar um grupo de impressoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impressora é a hospedeira de um grupo de %1 impressoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Conectar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Endereço IP inválido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Por favor entre um endereço IP válido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Endereço da Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Entre o endereço IP da sua impressora na rede."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Alterações de Configuração"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Sobrepor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "A impressora associada, %1, requer a seguinte alteração de configuração:"
-msgstr[1] "A impressora associada, %1, requer as seguintes alterações de configuração:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "A impressora %1 está associada, mas o trabalho contém configuração de material desconhecida."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Alterar material %1 de %2 para %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Carregar %3 como material %1 (isto não pode ser sobreposto)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Alterar núcleo de impressão %1 de %2 para %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Alterar mesa de impressão para %1 (Isto não pode ser sobreposto)."
+msgid "OK"
+msgstr "Ok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Sobrepor irá usar os ajustes especificados com a configuração existente da impressora. Isto pode causar falha da impressão."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Vidro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alumínio"
+msgid "Printer selection"
+msgstr "Seleção de impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover para o topo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Remover"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Continuar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pausando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Continuando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pausar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Abortando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Abortar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Você tem certeza que quer mover %1 para o topo da fila?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Move o trabalho de impressão para o topo da fila"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Você tem certeza que quer remover %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Remover trabalho de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Você tem certeza que quer abortar %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Abortar impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Abortado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Finalizado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Preparando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Abortando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pausando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Pausado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Continuando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Necessária uma ação"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina %1 em %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gerir Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Por favor atualize o firmware de sua impressora parar gerir a fila remotamente."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Carregando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Inacessivel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Ocioso"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Imprimindo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sem Título"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anônimo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Requer mudanças na configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalhes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impressora indisponível"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Por favor selecionar quaisquer atualizações feitas nesta Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Primeira disponível"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Mesa de Impressão Aquecida (kit Oficial ou auto-construído)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Abortado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelamento da mesa de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Finalizado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Para garantir que suas impressões saiam ótimas, você deve agora ajustar sua mesa de impressão. Quando você clicar em 'Mover para a Posição Seguinte', o bico se moverá para posições diferentes que podem ser ajustadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Preparando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posição; insira um pedaço de papel abaixo do bico e ajuste a altura da mesa de impressão. A altura da mesa de impressão está adequada quando o papel for levemente pressionado pela ponta do bico."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Abortando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar Nivelamento da Mesa de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pausando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mover pra a Posição Seguinte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Pausado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir Projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Continuando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Atualizar existentes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Necessária uma ação"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Criar novos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina %1 em %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumo - Projeto do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Ajustes da impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Como o conflito na máquina deve ser resolvido?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo de Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Ajustes de perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Como o conflito no perfil deve ser resolvido?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Objetivo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Ausente no perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 sobreposto"
+msgstr[1] "%1 sobrepostos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 sobreposição"
+msgstr[1] "%1, %2 sobreposições"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Ajustes de material"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Como o conflito no material deve ser resolvido?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidade dos ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Ajustes visíveis:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Carregar um projeto limpará todos os modelos da mesa de impressão."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Algumas coisas podem ser problemáticas nesta impressão. Clique para ver dicas de correção."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Por favor certifique-se que sua impressora está conectada>\n"
+"- Verifique se ela está ligada.\n"
+"- Verifique se ela está conectada à rede.\n"
+"- Verifique se você está logado para descobrir impressoras conectadas à nuvem."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Por favor conecte sua impressora à rede."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuais de usuário online"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Mais informações em coleção anônima de dados"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "O Ultimaker Cura coleta dados anônimos para poder aprimorar a qualidade de impressão e experiência do usuário. Abaixo segue um exemplo de todos os dados que são compartilhados:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Recusar enviar dados anônimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir enviar dados anônimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Enfileirados"
+msgid "Color scheme"
+msgstr "Esquema de Cores"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gerir no navegador"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Cor do Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de Linha"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidade"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Não há trabalhos de impressão na fila. Fatie e envie um trabalho para adicioná-lo."
+msgid "Compatibility Mode"
+msgstr "Modo de Compatibilidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabalhos de impressão"
+msgid "Travels"
+msgstr "Percursos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo total de impressão"
+msgid "Helpers"
+msgstr "Assistentes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Esperando por"
+msgid "Shell"
+msgstr "Perímetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir pela rede"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Preenchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Seleção de impressora"
+msgid "Only Show Top Layers"
+msgstr "Somente Exibir Camadas Superiores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Entrar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Exibir 5 Camadas Superiores Detalhadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Sua chave para impressão 3D conectada"
+msgid "Top / Bottom"
+msgstr "Topo / Base"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personalize sua experiência com mais perfis de impressão e complementos\n"
-"- Mantenha-se flexível ao sincronizar sua configuração e a acessar em qualquer lugar\n"
-"- Melhore a eficiência com um fluxo de trabalho remoto com as impressoras Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parede Interna"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Criar conta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "mín"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Verificando..."
+msgid "max"
+msgstr "máx"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Ajustes do Bico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Conta sincronizada"
+msgid "Nozzle size"
+msgstr "Tamanho do bico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Alguma coisa deu errado..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalação aguardando atualizações"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diâmetro de material compatível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificar atualizações da conta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Deslocamento X do Bico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Última atualização: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Deslocamento Y do Bico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Conta na Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Número da Ventoinha de Resfriamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Deslogar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-Code Inicial do Extrusor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-Code Final do Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Ajustes de Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Sem estimativa de tempo disponível"
+msgid "X (Width)"
+msgstr "X (largura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Sem estimativa de custo disponível"
+msgid "Y (Depth)"
+msgstr "Y (Profundidade)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Pré-visualização"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Altura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimativa de tempo"
+msgid "Build plate shape"
+msgstr "Forma da plataforma de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimativa de material"
+msgid "Origin at center"
+msgstr "Origem no centro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Mesa aquecida"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de construção aquecido"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Fatiando..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Sabor de G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Não foi possível fatiar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Ajustes da Cabeça de Impressão"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X máx."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y máx."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Altura do Eixo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de Extrusores"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-Code Inicial"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-Code Final"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Converter imagem..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "A distância máxima de cada pixel da \"Base\"."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "A altura-base da mesa de impressão em milímetros."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "A largura da mesa de impressão em milímetros."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largura (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "A profundidade da mesa de impressão em milímetros"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidade (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para litofanos, pixels escuros devem corresponder a locais mais espessos para conseguir bloquear mais luz. Para mapas de altura, pixels mais claros significam terreno mais alto, portanto tais pixels devem corresponder a locais mais espessos no modelo 3d gerado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Mais escuro é mais alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Mais claro é mais alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Para litofanos, um modelo logarítmico simples para translucidez está disponível. Para mapas de altura os valores de pixels correspondem a alturas, linearmente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "A porcentagem de luz penetrando uma impressão com espessura de 1 milímetro. Abaixar este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmitância de 1mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A quantidade de suavização para aplicar na imagem."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavização"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Meus backups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Você não tem nenhum backup atualmente. Use o botão 'Backup Agora' para criar um."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante a fase de pré-visualização, você estará limitado a 5 backups visíveis. Remova um backup para ver os mais antigos."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Fazer backup e sincronizar os ajustes do Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Processando"
+msgid "Want more?"
+msgstr "Quer mais?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Fatiar"
+msgid "Backup Now"
+msgstr "Backup Agora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Inicia o processo de fatiamento"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Auto Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Criar um backup automaticamente toda vez que o Cura iniciar."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versão do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiais"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfis"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Complementos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Restore"
+msgstr "Restaurar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostra Guia de Resolução de Problemas Online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Apagar o Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Alternar Tela Cheia"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Você tem certeza que deseja apagar este backup? Isto não pode ser desfeito."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Sair da Tela Cheia"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "Desfazer (&U)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Você precisará reiniciar o Cura antes que seu backup seja restaurado. Deseja fechar o Cura agora?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Refazer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Backups do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Arquivo (&F)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Salvar Projeto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "Sair (&Q)"
+msgid "Export Selection..."
+msgstr "Exportar Seleção..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Visão &3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &Recente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Selecione configuração"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Habilitado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Use cola para melhor aderência com essa combinação de materiais."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuração não está disponível porque %1 não foi reconhecido. Por favor visite %2 para baixar o perfil de materil correto."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Mercado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Carregando configurações disponíveis da impressora..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "As configurações não estão disponíveis porque a impressora está desconectada."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Ver"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Visão Frontal"
+msgid "&Camera position"
+msgstr "Posição da &câmera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Visão Superior"
+msgid "Camera view"
+msgstr "Visão de câmera"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Visão do Lado Esquerdo"
+msgid "Perspective"
+msgstr "Perspectiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Visão do Lado Direito"
+msgid "Orthographic"
+msgstr "Ortográfico"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configurar Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "Plataforma de Impressão (&B)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Adicionar Impressora..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impressoras habilitadas pela rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Adm&inistrar Impressoras..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impressoras locais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Administrar Materiais..."
+msgid "Visible Settings"
+msgstr "Ajustes Visíveis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Adicionar mais materiais do Mercado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "At&ualizar perfil com valores e sobreposições atuais"
+msgid "Collapse All Categories"
+msgstr "Encolher Todas As Categorias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Descartar ajustes atuais"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gerenciar Visibilidade dos Ajustes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Criar perfil a partir de ajustes/sobreposições atuais..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "Aju&stes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Administrar perfis..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Im&pressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Exibir &Documentação Online"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Relatar um &Bug"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir Como Extrusor Ativo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Novidades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Habilitar Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Sobre..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Desabilitar Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Remover Modelo Selecionado"
-msgstr[1] "Remover Modelos Selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centralizar Modelo Selecionado"
-msgstr[1] "Centralizar Modelos Selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir Modelo Selecionado Com:"
+msgstr[1] "Imprimir Modelos Selecionados Com:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Multiplicar Modelo Selecionado"
 msgstr[1] "Multiplicar Modelos Selecionados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Remover Modelo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Número de Cópias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ce&ntralizar Modelo na Mesa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "A&grupar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Desagrupar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar ajustes atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Co&mbinar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Multiplicar Modelo..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alguns ajustes/sobreposições têm valores diferentes dos que estão armazenados no perfil.\n"
+"\n"
+"Clique para abrir o gerenciador de perfis."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Selecionar Todos Os Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "On"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Esvaziar a Mesa de Impressão"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Off"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Recarregar Todos Os Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimental"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Posicionar Todos os Modelos em Todas as Plataformas de Impressão"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Posicionar Todos os Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Posicionar Seleção"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Ajustes de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Reestabelecer as Posições de Todos Os Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuração de Impressão desabilitada. O arquivo de G-Code não pode ser modificado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Remover as Transformações de Todos Os Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Preenchimento gradual"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Abrir Arquiv&o(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Preenchimento gradual aumentará gradualmente a quantidade de preenchimento em direção ao topo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Novo Projeto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Exibir Pasta de Configuração"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Você modificou alguns ajustes de perfil. Se você quiser alterá-los, use o modo personalizado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar a visibilidade dos ajustes..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Gera estrutura que suportarão partes do modelo que têm seções pendentes. Sem estas estruturas, tais partes desabariam durante a impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este pacote será instalado após o reinício."
+msgid "Adhesion"
+msgstr "Aderência"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Geral"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Habilita imprimir um brim (bainha) ou raft (jangada). Adicionará uma área chata em volta ou sob o objeto que é fácil de remover após a impressão ter finalizado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Não há perfil %1 para a configuração no extrusor %2. O objetivo default será usado no lugar dele"
+msgstr[1] "Não há perfis %1 para a configurações nos extrusores %2. O objetivo default será usado no lugar deles"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impressoras"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfis"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Impressão ativa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Fechando %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nome do Trabalho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Tem certeza que quer sair de %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Tempo restante estimado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir arquivo(s)"
+msgid "Discard or Keep changes"
+msgstr "Descartar ou Manter alterações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar Pacote"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Você personalizou alguns ajustes de perfil.\n"
+"Gostaria de manter estes ajustes alterados após mudar de perfis?\n"
+"Alternativamente, você pode descartar as alterações para carregar os defaults de '%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir Arquivo(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Ajustes de perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Encontramos um ou mais arquivos de G-Code entre os arquivos que você selecionou. Você só pode abrir um arquivo de G-Code por vez. Se você quiser abrir um arquivo de G-Code, por favor selecione somente um."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Alterações atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Adicionar Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Sempre perguntar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novidades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Descartar e não perguntar novamente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Manter e não perguntar novamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Descartar alterações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Manter alterações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Sobre %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versão: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Solução completa para impressão 3D com filamento fundido."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3606,2002 +3608,2103 @@ msgstr ""
 "Cura é desenvolvido pela Ultimaker B.V. em cooperação com a comunidade.\n"
 "Cura orgulhosamente usa os seguintes projetos open-source:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface Gráfica de usuário"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Framework de Aplicações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Gerador de G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicação interprocessos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Linguagem de Programação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Framework Gráfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Ligações da Framework Gráfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de Ligações C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de Intercâmbio de Dados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Bibliteca de suporte para computação científica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de suporte para matemática acelerada"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de suporte para manuseamento de arquivos STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Biblioteca de suporte para manuseamento de objetos planares"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de suporte para manuseamento de malhas triangulares"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de suporte para manuseamento de arquivos 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de suporte para streaming e metadados de arquivo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicação serial"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de descoberta 'ZeroConf'"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recorte de polígonos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Verificador de tipos estáticos para Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados raiz para validar confiança de SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de rastreamento de Erros de Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de empacotamento Polygon, desenvolvido pela Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Ligações de Python para a libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Fonte"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ícones SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementação de aplicação multidistribuição em Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir arquivo de projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este é um arquivo de projeto do Cura. Gostaria de abri-lo como um projeto ou importar os modelos dele?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Lembrar minha escolha"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Descartar ou Manter alterações"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Você personalizou alguns ajustes de perfil.\n"
-"Gostaria de manter estes ajustes alterados após mudar de perfis?\n"
-"Alternativamente, você pode descartar as alterações para carregar os defaults de '%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Ajustes de perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Alterações atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Sempre perguntar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Descartar e não perguntar novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Manter e não perguntar novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Descartar alterações"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Manter alterações"
+msgid "Open file(s)"
+msgstr "Abrir arquivo(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Encontramos um ou mais arquivo(s) de projeto entre os arquivos que você selecionou. Você só pode abrir um arquivo de projeto por vez. Sugerimos que somente importe modelos destes arquivos. Gostaria de prosseguir?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importar todos como modelos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Salvar Projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrusor %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Não exibir resumo do projeto ao salvar novamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Salvar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir Modelo Selecionado com %1"
-msgstr[1] "Imprimir Modelos Selecionados com %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir arquivo de projeto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este é um arquivo de projeto do Cura. Gostaria de abri-lo como um projeto ou importar os modelos dele?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Lembrar minha escolha"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como projeto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Sem Título"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Arquivo (&F)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bem-vindo ao Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Editar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Ver"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Começar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "Aju&stes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vazio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensões"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Nos ajude a melhor o Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referências"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "O Ultimaker Cura coleta dados anônimos para melhor a qualidade de impressão e experiência do usuário, incluindo:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Ajuda (&H)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Novo projeto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Uso do material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Tem certeza que quer iniciar novo projeto? Isto esvaziará a mesa de impressão e quaisquer ajustes não salvos."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de fatias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Ajustes de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurações"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Dados coletados pelo Ultimaker Cura não conterão nenhuma informação pessoal."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mais informações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuração não está disponível porque %1 não foi reconhecido. Por favor visite %2 para baixar o perfil de materil correto."
+msgid "Add printer by IP address"
+msgstr "Adicionar impressora por endereço IP"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Entre o endereço IP de sua impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Adicionar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "Could not connect to device."
+msgstr "Não foi possível conectar ao dispositivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Carregando configurações disponíveis da impressora..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Não consegue conectar à sua impressora Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "As configurações não estão disponíveis porque a impressora está desconectada."
+msgid "The printer at this address has not responded yet."
+msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Selecione configuração"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Esta impressora não pode ser adicionada porque é uma impressora desconhecida ou porque não é o host do grupo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Voltar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Conectar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurações"
+msgid "Add a printer"
+msgstr "Adicionar uma impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Adicionar uma impressora de rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Add a non-networked printer"
+msgstr "Adicionar uma impressora local"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Habilitado"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Add a Cloud printer"
+msgstr "Adicionar uma impressora de Nuvem"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Use cola para melhor aderência com essa combinação de materiais."
+msgid "Waiting for Cloud response"
+msgstr "Aguardando resposta da Nuvem"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir Modelo Selecionado Com:"
-msgstr[1] "Imprimir Modelos Selecionados Com:"
+msgid "No printers found in your account?"
+msgstr "Nenhuma impressora encontrada em sua conta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar Modelo Selecionado"
-msgstr[1] "Multiplicar Modelos Selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "As seguintes impressoras da sua conta foram adicionadas ao Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Adicionar impressora manualmente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de Cópias"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Salvar Projeto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar Seleção..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Pular"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Contrato de Usuário"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impressoras habilitadas pela rede"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rejeitar e fechar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impressoras locais"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &Recente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Não foi encontrada nenhuma impressora em sua rede."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Im&pressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Adicionar impressora por IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir Como Extrusor Ativo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Adicionar impressora de nuvem"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Habilitar Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Resolução de problemas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Desabilitar Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor do perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome da impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Por favor dê um nome à sua impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Última atualização: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Conta na Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Deslogar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Entrar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Verificando..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Conta sincronizada"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Alguma coisa deu errado..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalação aguardando atualizações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificar atualizações da conta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Ajustes Visíveis"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Mostra Guia de Resolução de Problemas Online"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Encolher Todas As Categorias"
+msgid "Toggle Full Screen"
+msgstr "Alternar Tela Cheia"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gerenciar Visibilidade dos Ajustes..."
+msgid "Exit Full Screen"
+msgstr "Sair da Tela Cheia"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "Desfazer (&U)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Refazer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "Sair (&Q)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Posição da &câmera"
+msgid "3D View"
+msgstr "Visão &3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Visão de câmera"
+msgid "Front View"
+msgstr "Visão Frontal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectiva"
+msgid "Top View"
+msgstr "Visão Superior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfico"
+msgid "Left Side View"
+msgstr "Visão do Lado Esquerdo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Plataforma de Impressão (&B)"
+msgid "Right Side View"
+msgstr "Visão do Lado Direito"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Não conectado a nenhuma impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configurar Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "A impressora não aceita comandos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Adicionar Impressora..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Em manutenção. Por favor verifique a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Adm&inistrar Impressoras..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "A conexão à impressora foi perdida"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Administrar Materiais..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Imprimindo..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Adicionar mais materiais do Mercado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Pausado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "At&ualizar perfil com valores e sobreposições atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Preparando..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Descartar ajustes atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Por favor remova a impressão"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Criar perfil a partir de ajustes/sobreposições atuais..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Administrar perfis..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Exibir &Documentação Online"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Relatar um &Bug"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Novidades"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Sobre..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Remover Modelo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ce&ntralizar Modelo na Mesa"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "A&grupar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Desagrupar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Co&mbinar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Multiplicar Modelo..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Selecionar Todos Os Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Esvaziar a Mesa de Impressão"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Recarregar Todos Os Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Posicionar Todos os Modelos em Todas as Plataformas de Impressão"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Posicionar Todos os Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Posicionar Seleção"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Reestabelecer as Posições de Todos Os Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Remover as Transformações de Todos Os Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Abrir Arquiv&o(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Novo Projeto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Exibir Pasta de Configuração"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar a visibilidade dos ajustes..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Mercado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ajustes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Atual"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unidade"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informação"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar Mudança de Diâmetro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "O novo diâmetro de filamento está ajustado em %1 mm, que não é compatível com o extrusor atual. Você deseja continuar?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Abortar Impressão"
+msgid "Display Name"
+msgstr "Exibir Nome"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Tem certeza que deseja abortar a impressão?"
+msgid "Material Type"
+msgstr "Tipo de Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Está impresso como suporte."
+msgid "Color"
+msgstr "Cor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Outros modelos se sobrepondo a esse modelo foram modificados."
+msgid "Properties"
+msgstr "Propriedades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Preenchimento se sobrepondo a este modelo foi modificado."
+msgid "Density"
+msgstr "Densidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Sobreposições neste modelo não são suportadas."
+msgid "Diameter"
+msgstr "Diâmetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Sobrepõe %1 ajuste."
-msgstr[1] "Sobrepõe %1 ajustes."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Custo do Filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+msgid "Filament weight"
+msgstr "Peso do Filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Comprimento do Filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Custo por Metro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está vinculado a %1 e compartilha algumas de suas propriedades."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desvincular Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrição"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informação sobre Aderência"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Ativar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Criar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Confirmar Remoção"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Tem certeza que deseja remover %1? Isto não poderá ser desfeito!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importar Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Não foi possível importar material <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material <filename>%1</filename> importado com sucesso"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exportar Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Falha em exportar material para <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material exportado para <filename>%1</filename> com sucesso"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impressoras"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Renomear"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfis"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Criar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplicar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Criar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Por favor dê um nome a este perfil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Renomear Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Impressora: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Atualizar perfil com ajustes/sobreposições atuais"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Este perfil usa os defaults especificados pela impressora, portanto não tem ajustes/sobreposições na lista abaixo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Seus ajustes atuais coincidem com o perfil selecionado."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Ajustes globais"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidade dos Ajustes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Verificar tudo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Geral"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moeda:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Tema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Você precisará reiniciar a aplicação para que essas mudanças tenham efeito."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Fatiar automaticamente quando mudar ajustes."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Fatiar automaticamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento da área de visualização"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Ressaltar áreas sem suporte do modelo em vermelho. Sem suporte, estas áreas não serão impressas corretamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Exibir seções pendentes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Ressalta superfícies faltantes ou incorretas do modelo usando sinais de alerta. Os caminhos de extrusão frequentemente terão partes da geometria pretendida ausentes."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Exibir erros de modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Move a câmera de modo que o modelo fique no centro da visão quando for selecionado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centralizar câmera quanto o item é selecionado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "O comportamento default de ampliação deve ser invertido?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverter a direção da ampliação de câmera."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "A ampliação (zoom) deve se mover na direção do mouse?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Ampliar com o mouse não é suportado na perspectiva ortográfica."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Ampliar na direção do mouse"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Os modelos devem ser movidos na plataforma de modo que não se sobreponham?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Assegurar que os modelos sejam mantidos separados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Os modelos devem ser movidos pra baixo pra se assentar na plataforma de impressão?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Automaticamente fazer os modelos caírem na mesa de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Exibir mensagem de alerta no leitor de G-Code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensagem de alera no leitor de G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "A Visão de Camada deve ser forçada a ficar em modo de compatibilidade?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forçar modo de compatibilidade da visão de camadas (requer reinício)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "O Cura deve abrir no lugar onde foi fechado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar posição da janela no início"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Que tipo de renderização de câmera deve ser usada?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Renderização de câmera:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspectiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrindo e salvando arquivos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Arquivos da área de trabalho ou de aplicações externas devem ser abertos na mesma instância do Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Usar uma única instância do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Os modelos devem ser redimensionados dentro do volume de impressão se forem muito grandes?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Redimensionar modelos grandes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Um modelo pode ser carregado diminuto se sua unidade for por exemplo em metros ao invés de milímetros. Devem esses modelos ser redimensionados?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Redimensionar modelos minúsculos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Os modelos devem ser selecionados após serem carregados?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selecionar modelos ao carregar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Um prefixo baseado no nome da impressora deve ser adicionado ao nome do trabalho de impressão automaticamente?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Adicionar prefixo de máquina ao nome do trabalho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Um resumo deve ser exibido ao salvar um arquivo de projeto?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Exibir diálogo de resumo ao salvar projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento default ao abrir um arquivo de projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento default ao abrir um arquivo de projeto: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Sempre me perguntar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Sempre abrir como projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Sempre importar modelos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Quando você faz alterações em um perfil e troca para um diferent, um diálogo aparecerá perguntando se você quer manter ou aplicar suas modificações, ou você pode forçar um comportamento default e não ter o diálogo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfis"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento default para valores de configuração alterados ao mudar para um perfil diferente: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Sempre descartar alterações da configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Sempre transferir as alterações para o novo perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "O Cura deve verificar novas atualizações quando o programa for iniciado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Verificar atualizações na inicialização"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Dados anônimos sobre sua impressão podem ser enviados para a Ultimaker? Nota: nenhuma informação pessoalmente identificável, modelos ou endereços IP são enviados ou armazenados."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar informação (anônima) de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Mais informações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Ativar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Renomear"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Criar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Confirmar Remoção"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Tem certeza que deseja remover %1? Isto não poderá ser desfeito!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar Material"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Não foi possível importar material <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Tipo de Visão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material <filename>%1</filename> importado com sucesso"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Não conectado a nenhuma impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "A impressora não aceita comandos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Falha em exportar material para <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Em manutenção. Por favor verifique a impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material exportado para <filename>%1</filename> com sucesso"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "A conexão à impressora foi perdida"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informação"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Imprimindo..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar Mudança de Diâmetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Pausado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "O novo diâmetro de filamento está ajustado em %1 mm, que não é compatível com o extrusor atual. Você deseja continuar?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Preparando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Exibir Nome"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Por favor remova a impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de Material"
+msgid "Abort Print"
+msgstr "Abortar Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Cor"
+msgid "Are you sure you want to abort the print?"
+msgstr "Tem certeza que deseja abortar a impressão?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Propriedades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Ajustes de busca"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidade"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor para todos os extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diâmetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos os valores alterados para todos os extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Custo do Filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Ocultar este ajuste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso do Filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Não exibir este ajuste"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Comprimento do Filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Manter este ajuste visível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Custo por Metro"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Alguns ajustes ocultos usam valores diferentes de seu valor calculado normal.\n"
+"\n"
+"Clique para tornar estes ajustes visíveis."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está vinculado a %1 e compartilha algumas de suas propriedades."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Este ajuste não é usado porque todos os ajustes que ele influencia estão sobrepostos."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desvincular Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Afeta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Descrição"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Afetado Por"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informação sobre Aderência"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Este ajuste é sempre compartilhado entre todos os extrusores. Modificá-lo aqui mudará o valor para todos."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Ajustes de impressão"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Este ajuste é resolvido dos valores conflitante específicos de extrusor:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Criar"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Este ajuste tem um valor que é diferente do perfil.\n"
+"\n"
+"Clique para restaurar o valor do perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Criar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Por favor dê um nome a este perfil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Renomear Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impressora: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Atualizar perfil com ajustes/sobreposições atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar ajustes atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Este perfil usa os defaults especificados pela impressora, portanto não tem ajustes/sobreposições na lista abaixo."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Seus ajustes atuais coincidem com o perfil selecionado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Ajustes globais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ajustes"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Este ajuste é normalmente calculado, mas atualmente tem um conjunto absoluto de valores.\n"
+"\n"
+"Clique para restaurar o valor calculado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Visão 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Atual"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Viso de Frente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidade"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Visão de Cima"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidade dos Ajustes"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Visão à Esquerda"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Verificar tudo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Visão à Direita"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "A temperatura-alvo do hotend. O hotend vai aquecer ou esfriar na direção desta temperatura. Se for zero, o aquecimento de hotend é desligado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "A temperatura atual deste hotend."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "A temperatura com a qual pré-aquecer o hotend."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Pré-aquecer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Aquece o hotend com antecedência antes de imprimir. Você pode continuar ajustando sua impressão enquanto está aquecendo e não terá que esperar que o hotend termine o aquecimento quando estiver pronto para imprimir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "A cor do material neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "O material neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "O bico inserido neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Mesa de Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "A temperatura-alvo da mesa aquecida. A mesa aquecerá ou resfriará para esta temperatura. Se for zero, o aquecimento é desligado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "A temperatura atual da mesa aquecida."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "A temperatura em que pré-aquecer a mesa."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Aquecer a mesa antes de imprimir. Você pode continuar ajustando sua impressão enquanto ela está aquecendo, e não terá que esperar o aquecimento quando estiver pronto pra imprimir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Controle da Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Posição de Trote"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distância de Trote"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Enviar G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Enviar comando G-Code personalizado para a impressora conectada. Pressione 'enter' para enviar o comando."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "A impressora não está conectada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "A impressora de nuvem está offline. Por favor verifique se a impressora está ligada e conectada à internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impressora não está vinculada à sua conta. Por favor visite a Ultimaker Digital Factory para estabelecer uma conexão."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "A conexão de nuvem está indisponível. Por favor se logue para se conectar à impressora de nuvem."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "A conexão de nuvem está indisponível. Por favor verifique sua conexão de internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Adicionar impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gerenciar impressoras"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impressoras conectadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impressoras pré-ajustadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Impressão ativa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome do Trabalho"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo de Impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo restante estimado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Alguns ajustes/sobreposições têm valores diferentes dos que estão armazenados no perfil.\n"
-"\n"
-"Clique para abrir o gerenciador de perfis."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Não há perfil %1 para a configuração no extrusor %2. O objetivo default será usado no lugar dele"
-msgstr[1] "Não há perfis %1 para a configurações nos extrusores %2. O objetivo default será usado no lugar deles"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuração de Impressão desabilitada. O arquivo de G-Code não pode ser modificado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "On"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Off"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimental"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Adhesion"
-msgstr "Aderência"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Habilita imprimir um brim (bainha) ou raft (jangada). Adicionará uma área chata em volta ou sob o objeto que é fácil de remover após a impressão ter finalizado."
+msgid "Is printed as support."
+msgstr "Está impresso como suporte."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Preenchimento gradual"
+msgid "Other models overlapping with this model are modified."
+msgstr "Outros modelos se sobrepondo a esse modelo foram modificados."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Preenchimento gradual aumentará gradualmente a quantidade de preenchimento em direção ao topo."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Você modificou alguns ajustes de perfil. Se você quiser alterá-los, use o modo personalizado."
+msgid "Infill overlapping with this model is modified."
+msgstr "Preenchimento se sobrepondo a este modelo foi modificado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Suporte"
+msgid "Overlaps with this model are not supported."
+msgstr "Sobreposições neste modelo não são suportadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Gera estrutura que suportarão partes do modelo que têm seções pendentes. Sem estas estruturas, tais partes desabariam durante a impressão."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Sobrepõe %1 ajuste."
+msgstr[1] "Sobrepõe %1 ajustes."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Alguns ajustes ocultos usam valores diferentes de seu valor calculado normal.\n"
-"\n"
-"Clique para tornar estes ajustes visíveis."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Este ajuste não é usado porque todos os ajustes que ele influencia estão sobrepostos."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Editar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Afeta"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensões"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Afetado Por"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referências"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Este ajuste é sempre compartilhado entre todos os extrusores. Modificá-lo aqui mudará o valor para todos."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Ajuda (&H)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Este ajuste é resolvido dos valores conflitante específicos de extrusor:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Novo projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Este ajuste tem um valor que é diferente do perfil.\n"
-"\n"
-"Clique para restaurar o valor do perfil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Tem certeza que quer iniciar novo projeto? Isto esvaziará a mesa de impressão e quaisquer ajustes não salvos."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Este ajuste é normalmente calculado, mas atualmente tem um conjunto absoluto de valores.\n"
-"\n"
-"Clique para restaurar o valor calculado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Ajustes de busca"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor para todos os extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos os valores alterados para todos os extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Ocultar este ajuste"
+msgid "This package will be installed after restarting."
+msgstr "Este pacote será instalado após o reinício."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Não exibir este ajuste"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ajustes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Manter este ajuste visível"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Fechando %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Visão 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Tem certeza que quer sair de %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Viso de Frente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar Pacote"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Visão de Cima"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir Arquivo(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Visão à Esquerda"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Encontramos um ou mais arquivos de G-Code entre os arquivos que você selecionou. Você só pode abrir um arquivo de G-Code por vez. Se você quiser abrir um arquivo de G-Code, por favor selecione somente um."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Visão à Direita"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Adicionar Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Tipo de Visão"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novidades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Adicionar uma impressora de Nuvem"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "A impressora de nuvem está offline. Por favor verifique se a impressora está ligada e conectada à internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Aguardando resposta da Nuvem"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impressora não está vinculada à sua conta. Por favor visite a Ultimaker Digital Factory para estabelecer uma conexão."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Nenhuma impressora encontrada em sua conta?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "A conexão de nuvem está indisponível. Por favor se logue para se conectar à impressora de nuvem."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "As seguintes impressoras da sua conta foram adicionadas ao Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "A conexão de nuvem está indisponível. Por favor verifique sua conexão de internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Adicionar impressora manualmente"
+msgid "Add printer"
+msgstr "Adicionar impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Finalizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor do perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome da impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Por favor dê um nome à sua impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Adicionar uma impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Adicionar uma impressora de rede"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Adicionar uma impressora local"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Não foi encontrada nenhuma impressora em sua rede."
+msgid "Manage printers"
+msgstr "Gerenciar impressoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Atualizar"
+msgid "Connected printers"
+msgstr "Impressoras conectadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Adicionar impressora por IP"
+msgid "Preset printers"
+msgstr "Impressoras pré-ajustadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Adicionar impressora de nuvem"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir Modelo Selecionado com %1"
+msgstr[1] "Imprimir Modelos Selecionados com %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Resolução de problemas"
+msgid "Time estimation"
+msgstr "Estimativa de tempo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Adicionar impressora por endereço IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Entre o endereço IP de sua impressora."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "Material estimation"
+msgstr "Estimativa de material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Não foi possível conectar ao dispositivo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Não consegue conectar à sua impressora Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "A impressora neste endereço ainda não respondeu."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Fatiando..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Esta impressora não pode ser adicionada porque é uma impressora desconhecida ou porque não é o host do grupo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Não foi possível fatiar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Voltar"
+msgid "Processing"
+msgstr "Processando"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Conectar"
+msgid "Slice"
+msgstr "Fatiar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Conta da Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Sua chave para a impressão 3D conectada"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Personalize sua experiência com mais perfis de impressão e complementos"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Flexibilize-se ao sincronizar sua configuração e a acessar de qualquer lugar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Melhore a eficiência com um fluxo de trabalho remoto com as impressoras Ultimaker"
+msgid "Start the slicing process"
+msgstr "Inicia o processo de fatiamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Pular"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Nos ajude a melhor o Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Sem estimativa de tempo disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "O Ultimaker Cura coleta dados anônimos para melhor a qualidade de impressão e experiência do usuário, incluindo:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Sem estimativa de custo disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Pré-visualização"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Uso do material"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Provê suporte a escrita e reconhecimento de drives a quente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de fatias"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Complemento de Dispositivo de Escrita Removível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Ajustes de impressão"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Atualiza configuração do Cura 3.5 para o Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Dados coletados pelo Ultimaker Cura não conterão nenhuma informação pessoal."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Atualização de Versão de 3.5 para 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mais informações"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Atualiza configurações do Cura 4.6.2 para o Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vazio"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Atualização de Versão de 4.6.2 para 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contrato de Usuário"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Atualiza configurações do Cura 2.2 para o Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rejeitar e fechar"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Atualização de Versão de 2.2 para 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bem-vindo ao Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Atualiza configurações do Cura 4.2 para o Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Por favor siga estes passos para configurar\n"
-"o Ultimaker Cura. Isto tomará apenas alguns momentos."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Atualização de Versão de 4.2 para 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Começar"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Atualiza configurações do Cura 4.6.0 para o Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "O que há de novo no Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Atualização de Versão de 4.6.0 para 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Verifica modelos e configurações de impressão por possíveis problema e dá sugestões."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Atualiza configurações do Cura 3.0 para o Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Verificador de Modelo"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Atualização de Versão 3.0 para 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Provê suporte à leitura de arquivos 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Atualiza configurações do Cura 4.0 para o Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Leitor de 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Atualização de Versão 4.0 para 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Provê suporte à escrita de arquivos 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Atualiza configurações do Cura 2.6 para o Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Gerador de 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Atualização de Versão de 2.6 para 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Provê suporta à leitura de arquivos AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Atualiza configurações do Cura 2.5 para o Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Leitor AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Atualização de Versão de 2.5 para 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Permite backup e restauração da configuração."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Atualiza configurações do Cura 4.1 para o Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Backups Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Atualização de Versão 4.1 para 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Provê a ligação ao backend de fatiamento CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Atualiza configurações do Cura 2.1 para o Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Backend"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Atualização de Versão de 2.1 para 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Provê suporte à importação de perfis do Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Atualiza configurações do Cura 3.2 para o Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Leitor de Perfis do Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Atualização de Versão de 3.2 para 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Provê suporte à exportação de perfis do Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Atualiza configurações do Cura 4.5 para o Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Gravador de Perfis do Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Atualização de Versão de 4.5 para 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Verifica por atualizações de firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Atualiza configurações do Cura 4.4 para o Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Verificador de Atualizações de Firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Atualização de Versão de 4.4 para 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Provê ações de máquina para atualização do firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Atualiza configurações do Cura 4.7 para o Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Atualizador de Firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Atualização de Versão de 4.7 para 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Lê G-Code de um arquivo comprimido."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Atualiza configuração do Cura 3.3 para o Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Leitor de G-Code Comprimido"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Atualização de Versão de 3.3 para 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Escreve em formato G-Code comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Atualiza configurações do Cura 4.3 para o Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Gerador de G-Code Comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Atualização de Versão de 4.3 para 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Provê suporte a importar perfis de arquivos G-Code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Atualiza configurações do Cura 3.4 para o Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Leitor de Perfil de G-Code"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Atualização de Versão de 3.4 para 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite carregar e exibir arquivos G-Code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Atualiza configuração do Cura 2.7 para o Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Leitor de G-Code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Atualização de Versão de 2.7 para 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Escreve em formato G-Code."
+msgid "Provides support for reading AMF files."
+msgstr "Provê suporta à leitura de arquivos AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Gerador de G-Code"
+msgid "AMF Reader"
+msgstr "Leitor AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Habilita a geração de geometria imprimível de arquivos de imagem 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Provê suporte a importar perfis de arquivos G-Code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Leitor de Imagens"
+msgid "G-code Profile Reader"
+msgstr "Leitor de Perfil de G-Code"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Provê suporte a importação de perfis de versões legadas do Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Provê ações de máquina para atualização do firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Leitor de Perfis de Cura Legado"
+msgid "Firmware Updater"
+msgstr "Atualizador de Firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Provê uma maneira de alterar ajustes de máquina (tais como volume de impressão, tamanho do bico, etc.)."
+msgid "Provides support for reading X3D files."
+msgstr "Provê suporte à leitura de arquivos X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Ação de Ajustes de Máquina"
+msgid "X3D Reader"
+msgstr "Leitor de X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Provê um estágio de monitor no Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Buscar, gerenciar e instalar novos pacotes do Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Estágio de Monitor"
+msgid "Toolbox"
+msgstr "Ferramentas"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5623,75 +5726,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Pós-processamento"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Provê um estágio de preparação no Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Provê a ligação ao backend de fatiamento CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Estágio de Preparação"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Backend"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Provê uma etapa de pré-visualização ao Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Aceita G-Code e o envia a uma impressora. O complemento também pode atualizar o firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Estágio de Pré-visualização"
+msgid "USB printing"
+msgstr "Impressão USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Provê suporte a escrita e reconhecimento de drives a quente."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Provê suporte à exportação de perfis do Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Complemento de Dispositivo de Escrita Removível"
+msgid "Cura Profile Writer"
+msgstr "Gravador de Perfis do Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Registra certos eventos de forma que possam ser usados pelo relator de acidentes"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Administra conexões de rede a impressora Ultimaker conectadas."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentinela para Registro"
+msgid "Ultimaker Network Connection"
+msgstr "Conexão de Rede Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Provê a Visão Simulada."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Provê ações de máquina para impressoras da Ultimaker (tais como assistente de nivelamento de mesa, seleção de atualizações, etc.)."
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Visão Simulada"
+msgid "Ultimaker machine actions"
+msgstr "Ações de máquina Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Submete informações de fatiamento anônimas. Pode ser desabilitado nas preferências."
+msgid "Provides support for reading 3MF files."
+msgstr "Provê suporte à leitura de arquivos 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informação de fatiamento"
+msgid "3MF Reader"
+msgstr "Leitor de 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Provê uma visualização de malha sólida normal."
+msgid "Writes g-code to a compressed archive."
+msgstr "Escreve em formato G-Code comprimido."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Visão Sólida"
+msgid "Compressed G-code Writer"
+msgstr "Gerador de G-Code Comprimido"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Lê G-Code de um arquivo comprimido."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Leitor de G-Code Comprimido"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Verifica modelos e configurações de impressão por possíveis problema e dá sugestões."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Verificador de Modelo"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Verifica por atualizações de firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Verificador de Atualizações de Firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite carregar e exibir arquivos G-Code."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Leitor de G-Code"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5703,16 +5846,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Apagador de Suporte"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Buscar, gerenciar e instalar novos pacotes do Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Ferramentas"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5723,6 +5856,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Leitor Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Registra certos eventos de forma que possam ser usados pelo relator de acidentes"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentinela para Registro"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5733,265 +5876,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Leitor UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Provê suporte para a escrita de Ultimaker Format Packages (Pacotes de Formato da Ultimaker)."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Gerador de UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Provê ações de máquina para impressoras da Ultimaker (tais como assistente de nivelamento de mesa, seleção de atualizações, etc.)."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Provê suporte a importação de perfis de versões legadas do Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ações de máquina Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Leitor de Perfis de Cura Legado"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Administra conexões de rede a impressora Ultimaker conectadas."
+msgid "Provides a prepare stage in Cura."
+msgstr "Provê um estágio de preparação no Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Conexão de Rede Ultimaker"
+msgid "Prepare Stage"
+msgstr "Estágio de Preparação"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Aceita G-Code e o envia a uma impressora. O complemento também pode atualizar o firmware."
+msgid "Provides a monitor stage in Cura."
+msgstr "Provê um estágio de monitor no Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impressão USB"
+msgid "Monitor Stage"
+msgstr "Estágio de Monitor"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Atualiza configurações do Cura 2.1 para o Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Provê a visão de Raios-X."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Atualização de Versão de 2.1 para 2.2"
+msgid "X-Ray View"
+msgstr "Visão de Raios-X"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Atualiza configurações do Cura 2.2 para o Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Provê suporte à escrita de arquivos 3MF."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Atualização de Versão de 2.2 para 2.4"
+msgid "3MF Writer"
+msgstr "Gerador de 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Atualiza configurações do Cura 2.5 para o Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Submete informações de fatiamento anônimas. Pode ser desabilitado nas preferências."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Atualização de Versão de 2.5 para 2.6"
+msgid "Slice info"
+msgstr "Informação de fatiamento"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Atualiza configurações do Cura 2.6 para o Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Provê uma etapa de pré-visualização ao Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Atualização de Versão de 2.6 para 2.7"
+msgid "Preview Stage"
+msgstr "Estágio de Pré-visualização"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Atualiza configuração do Cura 2.7 para o Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Provê a Visão Simulada."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Atualização de Versão de 2.7 para 3.0"
+msgid "Simulation View"
+msgstr "Visão Simulada"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Atualiza configurações do Cura 3.0 para o Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Provê uma maneira de alterar ajustes de máquina (tais como volume de impressão, tamanho do bico, etc.)."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Atualização de Versão 3.0 para 3.1"
+msgid "Machine Settings Action"
+msgstr "Ação de Ajustes de Máquina"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Atualiza configurações do Cura 3.2 para o Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Provê capacidade de ler e escrever perfis de material baseado em XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Atualização de Versão de 3.2 para 3.3"
+msgid "Material Profiles"
+msgstr "Perfis de Material"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Atualiza configuração do Cura 3.3 para o Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Provê uma visualização de malha sólida normal."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Atualização de Versão de 3.3 para 3.4"
+msgid "Solid View"
+msgstr "Visão Sólida"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Atualiza configurações do Cura 3.4 para o Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Provê suporte à importação de perfis do Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Atualização de Versão de 3.4 para 3.5"
+msgid "Cura Profile Reader"
+msgstr "Leitor de Perfis do Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Atualiza configuração do Cura 3.5 para o Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Provê suporte para a escrita de Ultimaker Format Packages (Pacotes de Formato da Ultimaker)."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Atualização de Versão de 3.5 para 4.0"
+msgid "UFP Writer"
+msgstr "Gerador de UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Atualiza configurações do Cura 4.0 para o Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Escreve em formato G-Code."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Atualização de Versão 4.0 para 4.1"
+msgid "G-code Writer"
+msgstr "Gerador de G-Code"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Atualiza configurações do Cura 4.1 para o Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Habilita a geração de geometria imprimível de arquivos de imagem 2D."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Atualização de Versão 4.1 para 4.2"
+msgid "Image Reader"
+msgstr "Leitor de Imagens"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Atualiza configurações do Cura 4.2 para o Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Permite backup e restauração da configuração."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Atualização de Versão de 4.2 para 4.3"
+msgid "Cura Backups"
+msgstr "Backups Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Atualiza configurações do Cura 4.3 para o Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "A pilha global não foi encontrada."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Atualização de Versão de 4.3 para 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Seu modelo não é manifold. As áreas ressaltadas indicam superfícies faltantes ou incorretas."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Atualiza configurações do Cura 4.4 para o Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Erros de modelo"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Atualização de Versão de 4.4 para 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Largura de camada"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Atualiza configurações do Cura 4.5 para o Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Sua chave para impressão 3D conectada"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Atualização de Versão de 4.5 para 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personalize sua experiência com mais perfis de impressão e complementos\n"
+#~ "- Mantenha-se flexível ao sincronizar sua configuração e a acessar em qualquer lugar\n"
+#~ "- Melhore a eficiência com um fluxo de trabalho remoto com as impressoras Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Atualiza configurações do Cura 4.6.0 para o Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Criar conta"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Atualização de Versão de 4.6.0 para 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Remover Modelo Selecionado"
+#~ msgstr[1] "Remover Modelos Selecionados"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Atualiza configurações do Cura 4.6.2 para o Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centralizar Modelo Selecionado"
+#~ msgstr[1] "Centralizar Modelos Selecionados"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Atualização de Versão de 4.6.2 para 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Multiplicar Modelo Selecionado"
+#~ msgstr[1] "Multiplicar Modelos Selecionados"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Atualiza configurações do Cura 4.7 para o Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Finalizar"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Atualização de Versão de 4.7 para 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Conta da Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Provê suporte à leitura de arquivos X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Sua chave para a impressão 3D conectada"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Leitor de X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Personalize sua experiência com mais perfis de impressão e complementos"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Provê capacidade de ler e escrever perfis de material baseado em XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Flexibilize-se ao sincronizar sua configuração e a acessar de qualquer lugar"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfis de Material"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Melhore a eficiência com um fluxo de trabalho remoto com as impressoras Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Provê a visão de Raios-X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Por favor siga estes passos para configurar\n"
+#~ "o Ultimaker Cura. Isto tomará apenas alguns momentos."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Visão de Raios-X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "O que há de novo no Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/pt_BR/fdmextruder.def.json.po b/resources/i18n/pt_BR/fdmextruder.def.json.po
index e668592eef..cff84ea438 100644
--- a/resources/i18n/pt_BR/fdmextruder.def.json.po
+++ b/resources/i18n/pt_BR/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-10-25 12:57+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
diff --git a/resources/i18n/pt_BR/fdmprinter.def.json.po b/resources/i18n/pt_BR/fdmprinter.def.json.po
index b1c41d1ed9..dc78d69228 100644
--- a/resources/i18n/pt_BR/fdmprinter.def.json.po
+++ b/resources/i18n/pt_BR/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-10-25 10:20+0100\n"
 "Last-Translator: Cláudio Sampaio <patola@gmail.com>\n"
 "Language-Team: Cláudio Sampaio <patola@gmail.com>\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Opção que diz se os extrusores usam um único aquecedor combinado ou cada um tem o seu respectivo aquecedor."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Áreas Proibidas"
@@ -487,8 +507,8 @@ msgstr "Deslocamento com o Extrusor"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Aplicar o deslocamento do extrusor ao sistema de coordenadas."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "Multiplicador da largura de extrusão da primeira camada. Aumentar este
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Perímetro"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Distância do percurso inserido após a parede externa para esconder melhor a costura em Z."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extrusor da Superfície Superior"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "O carro extrusor usado para imprimir a parte superior da peça. Este ajuste é usado em multi-extrusão."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Camadas da Superfície Superior"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "O número de camadas da superfície superior. Geralmente somente uma camada é suficiente para gerar superfícies de alta qualidade."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extrusor Superior/Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "O carro extrusor usado para imprimir as paredes superiores e inferiores. Este ajuste é usado na multi-extrusão."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Espessura Superior/Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "A espessura das camadas superiores e inferiores da impressão. Este valor dividido pela altura de camada define o número de camadas superiores e inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Espessura Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "A espessura das camadas superiores da impressão. Este valor dividido pela altura de camada define o número de camadas superiores."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Camadas Superiores"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "O número de camadas superiores. Quando calculado da espessura superior, este valor é arredondado para um inteiro."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Espessura Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "A espessura das camadas inferiores da impressão. Este valor dividido pela altura de camada define o número de camadas inferiores."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Camadas Inferiores"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "O número de camadas inferiores. Quando calculado da espessura inferior, este valor é arredondado para um inteiro."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Camadas Inferiores Iniciais"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "O número de camadas inferiores iniciais da plataforma de impressão pra cima. Quanto calculado a partir da espessura inferior, esse valor é arrendado para um número inteiro."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Padrão Superior/Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Padrão ou Estampa das camadas superiores e inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linhas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concêntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Ziguezague"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Camada Inicial do Padrão da Base"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "O padrão na base da impressão na primeira camada."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linhas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concêntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Ziguezague"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Conectar Polígonos do Topo e Base"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Conectar caminhos de contorno da base e topo quando estiverem próximos entre si. Para o padrão concêntrico, habilitar este ajuste reduzirá bastante o tempo de percurso, mas por as conexões poderem acontecer no meio do preenchimento, este recurso pode reduzir a qualidade da superfície superior."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Direções de Linha Superior/Inferior"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Uma lista de direções de linha inteiras para usar quando as camadas superiores e inferiores usarem os padrões de linha ou ziguezague. Elementos desta lista são usados sequencialmente à medida que as camadas progridem e quando o fim da lista é alcançado, ela inicia novamente. Os itens da lista são separados por vírgulas e a lita inteira é contida em colchetes. O default é uma lista vazia, o que significa usar os ângulos default (45 e 135 graus)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Penetração da Parede Externa"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Quando habilitado, as coordenadas da costura Z são relativas ao centro de cada parte. Quando desabilitado, as coordenadas definem uma posição absoluta na plataforma de impressão."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extrusor da Superfície Superior"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "O carro extrusor usado para imprimir a parte superior da peça. Este ajuste é usado em multi-extrusão."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Camadas da Superfície Superior"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "O número de camadas da superfície superior. Geralmente somente uma camada é suficiente para gerar superfícies de alta qualidade."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extrusor Superior/Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "O carro extrusor usado para imprimir as paredes superiores e inferiores. Este ajuste é usado na multi-extrusão."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Espessura Superior/Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "A espessura das camadas superiores e inferiores da impressão. Este valor dividido pela altura de camada define o número de camadas superiores e inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Espessura Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "A espessura das camadas superiores da impressão. Este valor dividido pela altura de camada define o número de camadas superiores."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Camadas Superiores"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "O número de camadas superiores. Quando calculado da espessura superior, este valor é arredondado para um inteiro."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Espessura Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "A espessura das camadas inferiores da impressão. Este valor dividido pela altura de camada define o número de camadas inferiores."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Camadas Inferiores"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "O número de camadas inferiores. Quando calculado da espessura inferior, este valor é arredondado para um inteiro."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Camadas Inferiores Iniciais"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "O número de camadas inferiores iniciais da plataforma de impressão pra cima. Quanto calculado a partir da espessura inferior, esse valor é arrendado para um número inteiro."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Padrão Superior/Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Padrão ou Estampa das camadas superiores e inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linhas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concêntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Ziguezague"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Camada Inicial do Padrão da Base"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "O padrão na base da impressão na primeira camada."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linhas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concêntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Ziguezague"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Conectar Polígonos do Topo e Base"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Conectar caminhos de contorno da base e topo quando estiverem próximos entre si. Para o padrão concêntrico, habilitar este ajuste reduzirá bastante o tempo de percurso, mas por as conexões poderem acontecer no meio do preenchimento, este recurso pode reduzir a qualidade da superfície superior."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Direções de Linha Superior/Inferior"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Uma lista de direções de linha inteiras para usar quando as camadas superiores e inferiores usarem os padrões de linha ou ziguezague. Elementos desta lista são usados sequencialmente à medida que as camadas progridem e quando o fim da lista é alcançado, ela inicia novamente. Os itens da lista são separados por vírgulas e a lita inteira é contida em colchetes. O default é uma lista vazia, o que significa usar os ângulos default (45 e 135 graus)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Sem Contorno nas Lacunas Z"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Ajusta a quantidade de sobreposição entre as paredes e (os extermos de) linhas centrais do contorno. Uma sobreposição pequena permite que as paredes se conectem firmemente ao contorno. Note que, dados uma largura de contorno e filete de parede iguais, qualquer valor maior que metade da largura da parede pode fazer com que o contorno ultrapasse a parede, pois a este ponto a posição do bico do extrusor de contorno pode já ter passado do meio da parede."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Largura de Remoção de Contorno"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "A maior largura das áreas de contorno que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos inferiores e superiores em superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Largura de Remoção do Contorno Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "A maior largura das áreas de contorno superiores que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos superiores em superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Largura de Remoção do Contorno Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "A maior largura das áreas de contorno inferiores que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos inferiores em superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Distância de Expansão do Contorno"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "A distância em que os contornos são expandidos pra dentro do preenchimento. Valores mais altos fazem o contorno aderir melhor ao padrão de preenchimento e faz as paredes de camadas vizinhas aderirem melhor ao contorno. Valores menores diminuem a quantidade de material usado."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Distância de Expansão do Contorno Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "A distância com que os contornos superiores são expandidos para dentro do preenchimento. Valores mais altos fazem o contorno se anexar melhor ao padrão de preenchimento e fazem as paredes da camada acima aderirem melhor ao contorno. Valores mais baixos economizam a quantidade de material usado."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Distância de Expansão do Contorno Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "A distância com que os contornos inferiores são expandidos para dentro do preenchimento. Valores mais altos fazem o contorno se anexar melhor ao padrão de preenchimento e fazem as paredes da camada abaixo aderirem melhor ao contorno. Valores mais baixos economizam a quantidade de material usado."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Ângulo Máximo do Contorno para Expansão"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Largura Mínima de Contorno para Expansão"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Áreas de contorno mais estreitas que esta não são expandidas. Isto evita expandir as áreas estreitas que são criadas quando a superfície do modelo tem inclinações quase verticais."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Preenchimento"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "O ângulo mínimo de seções pendentes internas para as quais o preenchimento é adicionado. Em um valor de 0°, objetos são completamente preenchidos no padrão escolhido, e 90° torna o volume oco, sem preenchimento."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Largura de Remoção de Contorno"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "A maior largura das áreas de contorno que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos inferiores e superiores em superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Largura de Remoção do Contorno Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "A maior largura das áreas de contorno superiores que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos superiores em superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Largura de Remoção do Contorno Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "A maior largura das áreas de contorno inferiores que serão removidas. Cada área de contorno menor que este valor desaparecerá. Isto pode ajudar em limitar a quantidade de tempo e material gastos em impressão de contornos inferiores em superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Distância de Expansão do Contorno"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "A distância em que os contornos são expandidos pra dentro do preenchimento. Valores mais altos fazem o contorno aderir melhor ao padrão de preenchimento e faz as paredes de camadas vizinhas aderirem melhor ao contorno. Valores menores diminuem a quantidade de material usado."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Distância de Expansão do Contorno Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "A distância com que os contornos superiores são expandidos para dentro do preenchimento. Valores mais altos fazem o contorno se anexar melhor ao padrão de preenchimento e fazem as paredes da camada acima aderirem melhor ao contorno. Valores mais baixos economizam a quantidade de material usado."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Distância de Expansão do Contorno Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "A distância com que os contornos inferiores são expandidos para dentro do preenchimento. Valores mais altos fazem o contorno se anexar melhor ao padrão de preenchimento e fazem as paredes da camada abaixo aderirem melhor ao contorno. Valores mais baixos economizam a quantidade de material usado."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Ângulo Máximo do Contorno para Expansão"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Superfícies Superiores e/ou Inferiores de seu objeto com um ângulo maior que este ajuste não terão seus contornos superior/inferior expandidos. Isto evita que expandam as áreas estreitas de contorno que são criadas quando a superfície do modelo tem uma inclinação praticamente vertical. Um ângulo de 0° é horizontal, um ângulo de 90° é vertical."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Largura Mínima de Contorno para Expansão"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Áreas de contorno mais estreitas que esta não são expandidas. Isto evita expandir as áreas estreitas que são criadas quando a superfície do modelo tem inclinações quase verticais."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Espessura do Suporte da Aresta de Contorno"
@@ -2561,8 +2591,8 @@ msgstr "Velocidade da Camada Inicial"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "A velocidade para a camada inicial. Um valor menor é aconselhado para aprimorar a aderência à mesa de impressão."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,8 +5105,8 @@ msgstr "Hierarquia do Processamento de Malha"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Determina a prioridade desta malha ao considerar múltiplas malhas de preenchimento sobrepostas. Áreas onde elas se sobrepõem terão as configurações da malha com o menor número. Uma malha de prenchimento de ordem maior modificará o preenchimento das malhas de preenchimento com as malhas de ordem mais baixa e normais."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "O ângulo máximo de seçọes pendentes depois de se tornarem imprimíveis. Com o valor de 0° todas as seções pendentes serão trocadas por uma parte do modelo conectada à mesa e 90° não mudará o modelo."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Habilitar Desengrenagem"
@@ -6362,6 +6402,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformação a ser aplicada ao modelo após o carregamento do arquivo."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Aplicar o deslocamento do extrusor ao sistema de coordenadas."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Perímetro"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Superfícies Superiores e/ou Inferiores de seu objeto com um ângulo maior que este ajuste não terão seus contornos superior/inferior expandidos. Isto evita que expandam as áreas estreitas de contorno que são criadas quando a superfície do modelo tem uma inclinação praticamente vertical. Um ângulo de 0° é horizontal, um ângulo de 90° é vertical."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "A velocidade para a camada inicial. Um valor menor é aconselhado para aprimorar a aderência à mesa de impressão."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Determina a prioridade desta malha ao considerar múltiplas malhas de preenchimento sobrepostas. Áreas onde elas se sobrepõem terão as configurações da malha com o menor número. Uma malha de prenchimento de ordem maior modificará o preenchimento das malhas de preenchimento com as malhas de ordem mais baixa e normais."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "A temperatura usada para a plataforma de impressão aquecida. Se for 0, a temperatura da mesa não será ajustada."
diff --git a/resources/i18n/pt_PT/cura.po b/resources/i18n/pt_PT/cura.po
index b156b94b0d..dccd578e97 100644
--- a/resources/i18n/pt_PT/cura.po
+++ b/resources/i18n/pt_PT/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
@@ -17,178 +17,193 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.0.7\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Desconhecido"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "A carregar máquinas..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "A configurar as preferências..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Impressoras em rede disponíveis"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "A Inicializar a Máquina Ativa..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Manter"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "A inicializar o gestor das máquinas..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "A inicializar o volume de construção..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "A configurar cenário..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Acabamento"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "A carregar interface..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "A inicializar o motor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Rascunho"
+# rever!
+# contexto!
+# Atenção?
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Aviso"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Erro"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Tem a certeza de que pretende remover {0}? Esta ação não pode ser anulada!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Material Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Desconhecido"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Perfis personalizados"
 
 # rever!
 # contexto
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Todos os Formatos Suportados ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Todos os Ficheiros (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Falha no início de sessão"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "A procurar nova posição para os objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "A Procurar Posição"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Acabamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Não é possível posicionar todos os objetos dentro do volume de construção"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "O perfil de acabamento foi criado para imprimir modelos e protótipos finais com o objetivo de se obter uma elevada qualidade de acabamento da superfície em termos visuais."
 
-# rever!
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Não é Possível Posicionar"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "O perfil de engenharia foi criado para imprimir protótipos funcionais e peças finais com o objetivo de se obter uma maior precisão dimensional assim como tolerâncias menores."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Backup"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Rascunho"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "O perfil de rascunho foi concebido para imprimir protótipos de teste e de validação de conceitos com o objetivo de se obter uma redução significativa do tempo de impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Não é possível ligar a(s) impressora(s) abaixo porque faz(em) parte de um grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Impressoras em rede disponíveis"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Volume de construção"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Manter"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Não é possível iniciar o Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -205,32 +220,32 @@ msgstr ""
 
 # rever!
 # button size?
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Enviar relatório de falhas para a Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Mostrar relatório de falhas detalhado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Mostrar pasta de configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Backup e Repor a Configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Relatório de Falhas"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -241,851 +256,481 @@ msgstr ""
 "            <p>Por favor utilize o botão \"Enviar relatório\" para publicar um relatório de erros automaticamente nos nossos servidores</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Informações do sistema"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Desconhecido"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Versão do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Idioma do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Idioma do Sistema Operativo"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Plataforma"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Versão Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Versão PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Ainda não inicializado<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Versão do OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Vendedor do OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Processador do OpenGL: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Determinação da origem do erro"
 
 # rever!
 # Registos?
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Relatórios"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Enviar relatório"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "A carregar máquinas..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "A configurar as preferências..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "A Inicializar a Máquina Ativa..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "A inicializar o gestor das máquinas..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "A inicializar o volume de construção..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "A configurar cenário..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "A carregar interface..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "A inicializar o motor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Apenas pode ser carregado um ficheiro G-code de cada vez. Importação {0} ignorada"
-
-# rever!
-# contexto!
-# Atenção?
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Aviso"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Não é possível abrir outro ficheiro enquanto o G-code estiver a carregar. Importação {0} ignorada"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Erro"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Multiplicar e posicionar objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "A posicionar objetos"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "A Posicionar Objeto"
+msgid "Login failed"
+msgstr "Falha no início de sessão"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Não foi possível ler a resposta."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Não é possível aceder ao servidor da conta Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "O estado apresentado não está correto."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Forneça as permissões necessárias ao autorizar esta aplicação."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Ocorreu algo inesperado ao tentar iniciar sessão, tente novamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Não é possível iniciar um novo processo de início de sessão. Verifique se ainda está ativa outra tentativa de início de sessão."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Não é possível aceder ao servidor da conta Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "O Ficheiro Já Existe"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "O ficheiro <filename>{0}</filename> já existe. Tem a certeza de que deseja substituí-lo?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "URL de ficheiro inválido:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozzle"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Definições atualizadas"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extrusor(es) desativado(s)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Falha ao exportar perfil para <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Falha ao exportar perfil para <filename>{0}</filename>: O plug-in de gravação comunicou uma falha."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Perfil exportado para <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Exportação bem-sucedida"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Falha ao importar perfil de <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Não é possível importar o perfil de <filename>{0}</filename> antes de ser adicionada uma impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Nenhum perfil personalizado para importar no ficheiro <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "O perfil <filename>{0}</filename> contém dados incorretos, não foi possível importá-lo."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Falha ao importar perfil de <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Perfil {0} importado com êxito."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "O ficheiro {0} não contém qualquer perfil válido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "O perfil {0} é de um formato de ficheiro desconhecido ou está corrompido."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Perfil personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "O perfil não inclui qualquer tipo de qualidade."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "A pilha global está em falta."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Não é possível adicionar o perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "O tipo de qualidade '{0}' não é compatível com a definição de máquina atualmente ativa '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal"
-" que possa utilizar este tipo de qualidade."
+msgstr "Aviso: o perfil não é visível porque o respetivo tipo de qualidade '{0}' não está disponível para a configuração atual. Mude para uma combinação de material/bocal que possa utilizar este tipo de qualidade."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Não suportado"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozzle"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "As definições foram alteradas de forma a corresponder aos extrusores disponíveis de momento:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "A procurar nova posição para os objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Definições atualizadas"
+msgid "Finding Location"
+msgstr "A Procurar Posição"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Não é possível posicionar todos os objetos dentro do volume de construção"
+
+# rever!
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extrusor(es) desativado(s)"
+msgid "Can't Find Location"
+msgstr "Não é Possível Posicionar"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grupo #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Concluir"
+msgid "Close"
+msgstr "Fechar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Next"
+msgstr "Seguinte"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grupo #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Concluir"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Parede Exterior"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Paredes Interiores"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Revestimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Enchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Enchimento dos Suportes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Interface dos Suportes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Suportes"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Contorno"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Torre de preparação"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Deslocação"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Retrações"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Outro"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Seguinte"
+msgid "Add"
+msgstr "Adicionar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Fechar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Assistente de Modelos 3D"
+msgid "Cancel"
+msgstr "Cancelar"
 
-# rever!
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Abrir ficheiro de projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Não é possível abrir o ficheiro de projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Ficheiro 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "O plug-in Gravador 3MF está danificado."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Não tem permissão para escrever o espaço de trabalho aqui."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Erro ao gravar ficheiro 3mf."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "Ficheiro 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Ficheiro 3MF de Projeto Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Ficheiro AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "A altura do volume de construção foi reduzida devido ao valor da definição \"Sequência de impressão\" para impedir que o pórtico colida com os modelos impressos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Cópias de segurança"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Ocorreu um erro ao carregar a sua cópia de segurança."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "A criar a cópia de segurança..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Ocorreu um erro ao criar a cópia de segurança."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "A carregar a sua cópia de segurança..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "A cópia de segurança terminou o seu carregamento."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "A cópia de segurança excede o tamanho de ficheiro máximo."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Gerir cópias de segurança"
+msgid "Build Volume"
+msgstr "Volume de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Não é possível criar um arquivo a partir do directório de dados do utilizador: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Não é possível Seccionar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas."
+msgid "Backup"
+msgstr "Backup"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Tentou restaurar um Cura backup sem existirem dados ou metadados correctos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Reveja as definições e verifique se os seus modelos:\n"
-"- Cabem dentro do volume de construção\n"
-"- Estão atribuídos a uma extrusora ativada\n"
-"- Não estão todos definidos como objetos modificadores"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Tentativa de reposição de uma cópia de segurança do Cura que é superior à versão atual."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "A Processar Camadas"
+msgid "Multiplying and placing objects"
+msgstr "Multiplicar e posicionar objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informações"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Perfil Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Não foi possível aceder às informações de atualização."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Novo firmware para %s está disponível"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Como atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Atualizar firmware"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Ficheiro G-code comprimido"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "O GCodeGzWriter não suporta modo de texto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Ficheiro G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "A analisar G-code"
+msgid "Placing Objects"
+msgstr "A posicionar objetos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Detalhes do G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Ficheiro G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "O GCodeWriter não suporta modo sem texto."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Prepare um G-code antes de exportar."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "Imagem JPG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "Imagem JPEG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "Imagem PNG"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "Imagem BMP"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "Imagem GIF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Perfis Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Definições da Máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitorizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Definições Por-Modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Configurar definições individuais Por-Modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Pós-Processamento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Modificar G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Preparar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Pré-visualizar"
+msgid "Placing Object"
+msgstr "A Posicionar Objeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Guardar no Disco Externo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
@@ -1093,281 +738,303 @@ msgstr "Guardar no Disco Externo {0}"
 
 # rever!
 # contexto
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Não existem quaisquer formatos disponíveis para gravar o ficheiro!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "A Guardar no Disco Externo <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "A Guardar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Não foi possível guardar em <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Não foi possível encontrar um nome do ficheiro ao tentar gravar em {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Não foi possível guardar no Disco Externo {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Guardado no Disco Externo {0} como {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Ficheiro Guardado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Ejetar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Ejetar Disco Externo {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} foi ejetado. O Disco já pode ser removido de forma segura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Remover Hardware de forma segura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Não foi possível ejectar {0}. Outro programa pode estar a usar o disco."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Disco Externo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Visualização por Camadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Sem camadas para visualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Não mostrar esta mensagem novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Vista Camadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "O seu modelo não é uma variedade. As áreas destacadas indicam superfícies extra ou em falta."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Erros de modelo"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Vista Sólidos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Remover Suportes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Criar um volume dentro do qual não são impressos suportes."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?"
+msgid "AMF File"
+msgstr "Ficheiro AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Foram detetadas alterações da sua conta Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Ficheiro G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Sincronizar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Atualizar firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "A sincronizar..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Ficheiro X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Rejeitar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Concordar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Contrato de licença do plug-in"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Rejeitar e remover da conta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Falhou a transferência de {} plug-ins"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "A sincronizar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Foram detetadas alterações da sua conta Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "É necessário reiniciar o {} para que as alterações tenham efeito."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Falhou a transferência de {} plug-ins"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Pretende sincronizar o material e os pacotes de software com a sua conta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Sincronizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Definições Por-Modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Configurar definições individuais Por-Modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Pós-Processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Modificar G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Não é possível seccionar com o material atual, uma vez que é incompatível com a impressora ou configuração selecionada."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Arquivo Ultimaker Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Não é possível Seccionar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Não é possível escrever no ficheiro UFP:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Não é possível seccionar com as definições atuais. As seguintes definições apresentam erros: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Nivelar base de construção"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Não é possível seccionar devido a algumas definições por modelo. As seguintes definições apresentam erros num ou mais modelos: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Selecionar atualizações"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Não é possível seccionar porque a torre de preparação ou a(s) posição(ões) de preparação é(são) inválidas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Imprimir através da cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Não é possível seccionar porque existem objetos associados ao extrusor %s desativado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Imprimir através da cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Reveja as definições e verifique se os seus modelos:\n"
+"- Cabem dentro do volume de construção\n"
+"- Estão atribuídos a uma extrusora ativada\n"
+"- Não estão todos definidos como objetos modificadores"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Ligada através da cloud"
+msgid "Processing Layers"
+msgstr "A Processar Camadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informações"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Impressão USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Imprimir por USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Imprimir por USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Ligado via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Impressão em curso"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Perfil Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Ligar Através da Rede"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nova impressora detetada a partir da sua conta Ultimaker"
 msgstr[1] "Novas impressoras detetadas a partir da sua conta Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Adicionar impressora {name} ({model}) a partir da sua conta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1375,71 +1042,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... e {0} outra"
 msgstr[1] "... e {0} outras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Impressoras adicionadas a partir da Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Não existe uma conectividade de cloud disponível para a impressora"
 msgstr[1] "Não existe uma conectividade de cloud disponível para algumas impressoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Esta impressora não está associada à Digital Factory:"
 msgstr[1] "Estas impressoras não estão associadas à Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Para estabelecer uma ligação, visite {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Manter configurações da impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Remover impressoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "A impressora {printer_name} vai ser removida até à próxima sincronização de conta."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Para remover a impressora {printer_name} de forma permanente, visite {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Tem a certeza de que pretende remover a impressora {printer_name} temporariamente?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Remover impressoras?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1448,2175 +1115,2514 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "Está prestes a remover {0} impressora do Cura. Esta ação não pode ser anulada.\nTem a certeza de que pretende continuar?"
-msgstr[1] "Está prestes a remover {0} impressoras do Cura. Esta ação não pode ser anulada.\nTem a certeza de que pretende continuar?"
+msgstr[0] ""
+"Está prestes a remover {0} impressora do Cura. Esta ação não pode ser anulada.\n"
+"Tem a certeza de que pretende continuar?"
+msgstr[1] ""
+"Está prestes a remover {0} impressoras do Cura. Esta ação não pode ser anulada.\n"
+"Tem a certeza de que pretende continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Está prestes a remover todas as impressoras do Cura. Esta ação não pode ser anulada.Tem a certeza de que pretende continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Envie e monitorize trabalhos de impressão a partir de qualquer lugar através da sua conta Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Imprimir através da cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Ligar à Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Imprimir através da cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Iniciar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Ligada através da cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Código de erro desconhecido ao carregar trabalho de impressão: {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente."
+msgid "tomorrow"
+msgstr "amanhã"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Atualizar a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "hoje"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}."
+msgid "Sending Print Job"
+msgstr "A enviar trabalho de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Enviar materiais para a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Carregar um trabalho de impressão na impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Está a tentar ligar a {0}, mas esta não é Host de um grupo. Pode visitar a página Web para a configurar como Host do grupo."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Não é Host do grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Configurar grupo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Envie e monitorize trabalhos de impressão a partir de qualquer lugar através da sua conta Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Ligar à Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Iniciar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Aguarde até o trabalho atual ter sido enviado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Erro de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Não foi possível carregar os dados para a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Erro de rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "A enviar trabalho de impressão"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "O Cura detetou perfis de material que ainda não estavam instalados na impressora que aloja o grupo {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Carregar um trabalho de impressão na impressora."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Enviar materiais para a impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "A fila de trabalhos de impressão está cheia. A impressora não consegue aceitar um novo trabalho."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Fila cheia"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "O trabalho de impressão foi enviado com sucesso para a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Dados Enviados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Está a tentar ligar a uma impressora que não tem o Ultimaker Connect. Atualize a impressora para o firmware mais recente."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Atualizar a impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Imprimir através da rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Imprimir através da rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Ligado através da rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Ligar Através da Rede"
+msgid "Select upgrades"
+msgstr "Selecionar atualizações"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "amanhã"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Nivelar base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "hoje"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Impressão USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Imprimir por USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "O ficheiro de projeto <filename>{0}</filename> contém um tipo de máquina desconhecido <message>{1}</message>. Não é possível importar a máquina. Em vez disso, serão importados os modelos."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Imprimir por USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Abrir ficheiro de projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Ligado via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "O projeto de ficheiro <filename>{0}</filename> ficou subitamente inacessível: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Existe uma impressão por USB em curso; fechar o Cura irá interromper esta impressão. Tem a certeza?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Não é possível abrir o ficheiro de projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Existe uma impressão em curso. O Cura não consegue iniciar outra impressão via USB até a impressão anterior ser concluída."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Impressão em curso"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "O ficheiro de projeto <filename>{0}</filename> foi criado utilizando perfis que são desconhecidos para esta versão do Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Ficheiro X3D"
+msgid "3MF File"
+msgstr "Ficheiro 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Vista Raio-X"
+msgid "Compressed G-code File"
+msgstr "Ficheiro G-code comprimido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "O GCodeGzWriter não suporta modo de texto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Abrir Projeto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Assistente de Modelos 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Atualizar existente"
+# rever!
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Um, ou mais, dos modelos 3D podem ter menos qualidade de impressão devido à dimensão do modelo 3D e definição de material:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Descubra como assegurar a melhor qualidade e fiabilidade possível da impressão.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ver o guia de qualidade da impressão</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Criar nova"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Não foi possível aceder às informações de atualização."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Resumo – Projeto Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Poderão estar disponíveis novas funcionalidades ou correções de erros para {machine_name}! Se ainda não tiver a versão mais recente, recomendamos que atualize o firmware da sua impressora para a versão {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Definições da impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Novo firmware para %s está disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Como deve ser resolvido o conflito da máquina?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Como atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tipo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Ficheiro G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Grupo da Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "A analisar G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Definições do perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Detalhes do G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Certifique-se de que este g-code é apropriado para a sua impressora e respetiva configuração, antes de enviar o ficheiro para a impressora. A representação do g-code poderá não ser exata."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Remover Suportes"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Como deve ser resolvido o conflito no perfil?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Criar um volume dentro do qual não são impressos suportes."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Nome"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Inexistente no perfil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-# rever!
-# contexto?!
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 substituição"
-msgstr[1] "%1 substituições"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Derivado de"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 substituição"
-msgstr[1] "%1, %2 substituições"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Definições de material"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Arquivo Ultimaker Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Como deve ser resolvido o conflito no material?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Perfis Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Visibilidade das definições"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Preparar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modo"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Monitorizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Definições visíveis:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Vista Raio-X"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 de %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Erro ao gravar ficheiro 3mf."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Abrir um projeto irá apagar todos os modelos na base de construção."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "Ficheiro 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Abrir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Ficheiro 3MF de Projeto Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Deseja mais?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "O plug-in Gravador 3MF está danificado."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Efetuar cópia de segurança agora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Não tem permissão para escrever o espaço de trabalho aqui."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Efetuar cópia de segurança automaticamente"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "O sistema operativo não permite guardar um ficheiro de projeto nesta localização ou com este nome de ficheiro."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Pré-visualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Restaurar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Vista Camadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Eliminar cópia de segurança"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Quando a opção Wire Printing está ativa, o Cura não permite visualizar as camadas de uma forma precisa."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Visualização por Camadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Restaurar cópia de segurança"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Não consegue visualizar, porque precisa de fazer o seccionamento primeiro."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Sem camadas para visualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Versão do Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Não mostrar esta mensagem novamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Máquinas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Definições da Máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materiais"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Vista Sólidos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Perfis"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Plug-ins"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cópias de segurança do Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "As minhas cópias de segurança"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Não é possível escrever no ficheiro UFP:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "O GCodeWriter não suporta modo sem texto."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Prepare um G-code antes de exportar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "Imagem JPG"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Iniciar sessão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "Imagem JPEG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "Imagem PNG"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "Imagem BMP"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "Imagem GIF"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Ocorreu um erro ao tentar restaurar a sua cópia de segurança."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Cópias de segurança"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Ocorreu um erro ao carregar a sua cópia de segurança."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "A criar a cópia de segurança..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Ocorreu um erro ao criar a cópia de segurança."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "A carregar a sua cópia de segurança..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "A cópia de segurança terminou o seu carregamento."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "A cópia de segurança excede o tamanho de ficheiro máximo."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Gerir cópias de segurança"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Atualizar firmware"
 
 # rever!
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "O firmware é o software que é executado diretamente na sua impressora 3D. Este firmware controla os motores de passo, regula a temperatura e basicamente assegura o funcionamento da sua impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "O firmware que é expedido com as novas impressoras funciona corretamente, mas as novas versões costumam ter mais funcionalidades e melhorias."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Atualizar firmware automaticamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Carregar firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "O firmware não pode ser atualizado por não existir ligação com a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "O firmware não pode ser atualizado porque a ligação com a impressora não suporta a atualização de firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Selecionar firmware personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Atualização de firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "A atualizar firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Atualização de firmware concluída."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "A atualização de firmware falhou devido a um erro desconhecido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "A atualização de firmware falhou devido a um erro de comunicação."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "A atualização de firmware falhou devido a um erro de entrada/saída."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "A atualização de firmware falhou devido à ausência de firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Converter imagem..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "A distância máxima de cada pixel desde a \"Base\""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "É necessário aceitar a licença para instalar o pacote"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Altura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Alterações feitas desde a sua conta"
 
-# rever!
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "A altura da \"Base\" desde a base de construção em milímetros."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Descartar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Base (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Seguinte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "A largura em milímetros na base de construção."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Os seguintes pacotes vão ser instalados:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Largura (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "A profundidade em milímetros na base de construção"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Confirmar desinstalação"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Profundidade (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Mais escuro é mais alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Mais claro é mais alto"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Confirmar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Linear"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Contribuições comunitárias"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Translucidez"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Plug-ins comunitários"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Materiais genéricos"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "(%) transmitância de 1 mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "A quantidade de suavização a aplicar à imagem."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Actualizado em"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Suavização"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marca"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Transferências"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Installed plugins"
+msgstr "Plug-ins instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Definições do nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Não foi instalado qualquer plug-in."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Tamanho do nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Materiais instalados"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Não foi instalado qualquer material."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Diâmetro do material compatível"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Plug-ins em pacote"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Desvio X do Nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Materiais em pacote"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Desvio Y do Nozzle"
+msgid "Website"
+msgstr "Site"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Número de ventoinha de arrefecimento"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "G-code inicial do extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "G-code final do extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Iniciar sessão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Definições da impressora"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "A obter pacotes..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Largura)"
+msgid "Compatibility"
+msgstr "Compatibilidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Profundidade)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Altura)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Forma da base de construção"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Suportes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origem no centro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Qualidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Base aquecida"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Ficha técnica"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Volume de construção aquecido"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Ficha de segurança"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Variante do G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Instruções de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Definições da cabeça de impressão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Site"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X mín"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y mín"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materiais"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X máx"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Instalado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y máx"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Ir para Mercado na Web"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Altura do pórtico"
+msgid "Will install upon restarting"
+msgstr "Será instalado após reiniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Número de Extrusores"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-code inicial"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "A Actualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-code final"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Atualizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Certifique-se de que é possível estabelecer ligação com a impressora:\n"
-"- Verifique se a impressora está ligada.\n"
-"- Verifique se a impressora está ligada à rede.\n"
-"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "É necessário <a href='%1'>Log in</a> para atualizar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Repor Versão Anterior"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Desinstalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Instalado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Comprar bobinas de material</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Procurar materiais"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Ligue a impressora à sua rede."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Ver manuais do utilizador online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sair %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Anterior"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Instalar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Tipo de Objecto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Modelo normal"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Imprimir como suporte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Modificar definições para sobreposições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Não suportar sobreposições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Apenas objeto de enchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Malha de corte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Selecionar definições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Selecionar definições a personalizar para este modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Mostrar tudo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Plug-in de pós-processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts de pós-processamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Adicionar um script"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Definições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Altere os scripts de pós-processamento."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "O script a seguir está ativo:"
 msgstr[1] "Os seguintes scripts estão ativos:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Esquema de cores"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Cor do Material"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Tipo de Linha"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Velocidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Espessura da Camada"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Modo Compatibilidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Deslocações"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Auxiliares"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Shell"
-msgstr "Invólucro"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Enchimento"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Só Camadas Superiores"
+msgid "Queued"
+msgstr "Em fila"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 Camadas Superiores Detalhadas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Gerir no browser"
 
-# rever!
-# todas as strings com a frase
-# Topo / Base ??
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Superior / Inferior"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Parede Interior"
+msgid "Print jobs"
+msgstr "Trabalhos em Impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "mín"
+msgid "Total print time"
+msgstr "Tempo de impressão total"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "máx"
+msgid "Waiting for"
+msgstr "A aguardar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Mais informações sobre a recolha anónima de dados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Não pretendo enviar dados anónimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Permitir o envio de dados anónimos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Anterior"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibilidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Máquina"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Base de construção"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Suportes"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Qualidade"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Ficha técnica"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Ficha de segurança"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Instruções de impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Site"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "É necessário <a href='%1'>Log in</a> para instalar ou atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Comprar bobinas de material</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "A Actualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Atualizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ir para Mercado na Web"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Procurar materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "É necessário reiniciar o Cura para que as alterações dos pacotes sejam aplicadas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sair %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Instalado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Será instalado após reiniciar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "É necessário <a href='%1'>Log in</a> para atualizar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Repor Versão Anterior"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Desinstalar"
+msgid "Configuration Changes"
+msgstr "Alterações na configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Instalar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Alterações feitas desde a sua conta"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Descartar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Seguinte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Os seguintes pacotes vão ser instalados:"
+msgid "Override"
+msgstr "Ignorar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Os seguintes pacotes não podem ser instalados devido a uma versão incompatível do Cura:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Confirmar desinstalação"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Está a desinstalar materiais e/ou perfis que ainda estão a ser utilizados. Mediante confirmação, as predefinições dos seguintes materiais/perfis serão repostas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Perfis"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Confirmar"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "A impressora atribuída %1 requer a seguinte alteração na configuração:"
+msgstr[1] "A impressora atribuída %1 requer as seguintes alterações na configuração:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "É necessário aceitar a licença para instalar o pacote"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "A impressora %1 está atribuída, mas o trabalho tem uma configuração de material desconhecida."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Site"
+msgid "Change material %1 from %2 to %3."
+msgstr "Alterar o material %1 de %2 para %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Carregar %3 como material %1 (isto não pode ser substituído)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versão"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Substituir o print core %1 de %2 para %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Actualizado em"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Alterar base de construção para %1 (isto não pode ser substituído)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marca"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Ignorar utilizará as definições especificadas com a configuração da impressora existente. Tal pode resultar numa falha de impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Transferências"
+msgid "Glass"
+msgstr "Vidro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Contribuições comunitárias"
+msgid "Aluminum"
+msgstr "Alumínio"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Plug-ins comunitários"
+msgid "Unavailable printer"
+msgstr "Impressora indisponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Materiais genéricos"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Não foi possível aceder á base de dados de Pacotes do Cura. Por favor verifique a sua ligação."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Plug-ins instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Não foi instalado qualquer plug-in."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Materiais instalados"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Não foi instalado qualquer material."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Plug-ins em pacote"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Materiais em pacote"
+msgid "First available"
+msgstr "Primeira disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "A obter pacotes..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Inicie sessão para obter plug-ins e materiais verificados para o Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mercado"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Nivelamento da Base de Construção"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Iniciar Nivelamento da base de construção"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Avançar para Posição Seguinte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Atualize o firmware da impressora para gerir a fila remotamente."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Ligar a uma Impressora em Rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Para imprimir diretamente para a sua impressora através da rede, certifique-se de que a impressora está ligada à rede através de um cabo de rede ou através de ligação à rede Wi-Fi. Se não ligar o Cura por rede à impressora, poderá ainda assim utilizar uma unidade USB para transferir ficheiros g-code para a impressora."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecione a impressora a partir da lista abaixo:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Editar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Remover"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Se a sua impressora não estiver na lista, por favor, consulte o <a href='%1'>guia de resolução de problemas de impressão em rede</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Versão de Firmware"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Endereço"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Esta impressora não está configurada para alojar um grupo de impressoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Esta impressora aloja um grupo de %1 impressoras."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Ligar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Endereço IP inválido"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Introduza um endereço IP válido."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Endereço da Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Introduza o endereço IP da sua impressora na rede."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Alterações na configuração"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Ignorar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "A impressora atribuída %1 requer a seguinte alteração na configuração:"
-msgstr[1] "A impressora atribuída %1 requer as seguintes alterações na configuração:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "A impressora %1 está atribuída, mas o trabalho tem uma configuração de material desconhecida."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Alterar o material %1 de %2 para %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Carregar %3 como material %1 (isto não pode ser substituído)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Substituir o print core %1 de %2 para %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Alterar base de construção para %1 (isto não pode ser substituído)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Ignorar utilizará as definições especificadas com a configuração da impressora existente. Tal pode resultar numa falha de impressão."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Imprimir Através da Rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Vidro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Imprimir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alumínio"
+msgid "Printer selection"
+msgstr "Seleção de Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Mover para o topo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Eliminar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Retomar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "A colocar em pausa..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "A recomeçar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Colocar em pausa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "A cancelar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Tem a certeza de que pretende mover %1 para o topo da fila?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Mover trabalho de impressão para o topo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Tem a certeza de que pretende eliminar %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Eliminar trabalho de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Tem a certeza de que deseja cancelar %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Cancelar impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Cancelado"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Impressão terminada"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "A preparar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "A cancelar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "A colocar em pausa..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Em Pausa"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "A recomeçar..."
+
+# rever!
+# ver contexto!
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Ação necessária"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Termina %1 a %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Gerir impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Atualize o firmware da impressora para gerir a fila remotamente."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "A carregar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Indisponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Inacessível"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inativa"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "A Imprimir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Sem título"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anónimo"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Requer alterações na configuração"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detalhes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Impressora indisponível"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Selecione quaisquer atualizações realizadas a esta Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Primeira disponível"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Base de Construção Aquecida (kit oficial ou de construção própria)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Cancelado"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Nivelamento da Base de Construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Impressão terminada"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Para assegurar uma boa qualidade das suas impressões, pode agora ajustar a base de construção. Quando clica em \"Avançar para a posição seguinte\", o nozzle irá deslocar-se para as diferentes posições que podem ser ajustadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "A preparar..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Para cada posição, introduza um pedaço de papel debaixo do nozzle e ajuste a altura da base de construção. A altura da base de construção está correta quando o papel fica ligeiramente preso pelo nozzle."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "A cancelar..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Iniciar Nivelamento da base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "A colocar em pausa..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Avançar para Posição Seguinte"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Em Pausa"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Abrir Projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "A recomeçar..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Atualizar existente"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Criar nova"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Resumo – Projeto Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Definições da impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Como deve ser resolvido o conflito da máquina?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tipo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Grupo da Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Definições do perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Como deve ser resolvido o conflito no perfil?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Nome"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Inexistente no perfil"
 
 # rever!
-# ver contexto!
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Ação necessária"
+# contexto?!
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 substituição"
+msgstr[1] "%1 substituições"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Termina %1 a %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Derivado de"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 substituição"
+msgstr[1] "%1, %2 substituições"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Definições de material"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Como deve ser resolvido o conflito no material?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Visibilidade das definições"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modo"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Definições visíveis:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 de %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Abrir um projeto irá apagar todos os modelos na base de construção."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Abrir"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Alguns factores podem vir a ser problemáticos nesta impressão. Clique para ver algumas sugestões para melhorar a qualidade da impressão."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Certifique-se de que é possível estabelecer ligação com a impressora:\n"
+"- Verifique se a impressora está ligada.\n"
+"- Verifique se a impressora está ligada à rede.\n"
+"- Verifique se tem sessão iniciada para encontrar impressoras ligadas através da cloud."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Ligue a impressora à sua rede."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Ver manuais do utilizador online"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Mais informações sobre a recolha anónima de dados"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador. Segue-se um exemplo de todos os dados partilhados:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Não pretendo enviar dados anónimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Permitir o envio de dados anónimos"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Em fila"
+msgid "Color scheme"
+msgstr "Esquema de cores"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Gerir no browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Cor do Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Tipo de Linha"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Velocidade"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Não existem trabalhos de impressão na fila. Para adicionar um trabalho, seccione e envie."
+msgid "Compatibility Mode"
+msgstr "Modo Compatibilidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Trabalhos em Impressão"
+msgid "Travels"
+msgstr "Deslocações"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Tempo de impressão total"
+msgid "Helpers"
+msgstr "Auxiliares"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "A aguardar"
+msgid "Shell"
+msgstr "Invólucro"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Imprimir Através da Rede"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Enchimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Imprimir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Seleção de Impressora"
+msgid "Only Show Top Layers"
+msgstr "Só Camadas Superiores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Iniciar sessão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 Camadas Superiores Detalhadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+# rever!
+# todas as strings com a frase
+# Topo / Base ??
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "A chave para a impressão 3D em rede"
+msgid "Top / Bottom"
+msgstr "Superior / Inferior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Personalize a sua experiência com mais perfis e plug-ins de impressão\n"
-"- Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local\n"
-"- Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Parede Interior"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Criar conta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "mín"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "A verificar..."
+msgid "max"
+msgstr "máx"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Definições do nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Conta sincronizada"
+msgid "Nozzle size"
+msgstr "Tamanho do nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Ocorreu um problema..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Instalar atualizações pendentes"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Diâmetro do material compatível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Verificar atualizações de conta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Desvio X do Nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Atualização mais recente: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Desvio Y do Nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Conta Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Número de ventoinha de arrefecimento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Terminar sessão"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "G-code inicial do extrusor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "G-code final do extrusor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Definições da impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nenhuma estimativa de tempo disponível"
+msgid "X (Width)"
+msgstr "X (Largura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nenhuma estimativa de custos disponível"
+msgid "Y (Depth)"
+msgstr "Y (Profundidade)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Pré-visualizar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Altura)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Estimativa de tempo"
+msgid "Build plate shape"
+msgstr "Forma da base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Estimativa de material"
+msgid "Origin at center"
+msgstr "Origem no centro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Base aquecida"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Volume de construção aquecido"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "A Seccionar..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Variante do G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Não é possível seccionar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Definições da cabeça de impressão"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X mín"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y mín"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X máx"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y máx"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Altura do pórtico"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Número de Extrusores"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-code inicial"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-code final"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Converter imagem..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "A distância máxima de cada pixel desde a \"Base\""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Altura (mm)"
+
+# rever!
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "A altura da \"Base\" desde a base de construção em milímetros."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Base (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "A largura em milímetros na base de construção."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Largura (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "A profundidade em milímetros na base de construção"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Profundidade (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Para litofanias, os pixels escuros devem corresponder a localizações mais espessas para bloquear mais a passagem da luz. Para mapas de altura, os pixels mais claros significam um terreno mais alto, por isso, os pixels mais claros devem corresponder a localizações mais espessas no modelo 3D gerado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Mais escuro é mais alto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Mais claro é mais alto"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Está disponível um modelo logarítmico simples para definir a translucidez das litofanias. Para mapas de altura, os valores dos pixels correspondem de forma linear à elevação."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Linear"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Translucidez"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "A percentagem de luz que penetra numa impressão com uma espessura de 1 milímetro. Diminuir este valor aumenta o contraste em regiões escuras e diminui o contraste em regiões claras da imagem."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "(%) transmitância de 1 mm"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "A quantidade de suavização a aplicar à imagem."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Suavização"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "As minhas cópias de segurança"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Atualmente não existem quaisquer cópias de segurança. Utilize o botão \"Efetuar cópia de segurança agora\" para criar uma."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Durante a fase de pré-visualização, terá um limite de 5 cópias de segurança visíveis. Remova uma cópia de segurança para ver as antigas."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Efetue a cópia de segurança e sincronize as suas definições do Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "A processar"
+msgid "Want more?"
+msgstr "Deseja mais?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Segmentação"
+msgid "Backup Now"
+msgstr "Efetuar cópia de segurança agora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Iniciar o processo de segmentação"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Efetuar cópia de segurança automaticamente"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Criar automaticamente uma cópia de segurança sempre que o Cura é iniciado."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Versão do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Máquinas"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materiais"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Plug-ins"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Cancelar"
+msgid "Restore"
+msgstr "Restaurar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Mostrar Guia de resolução de problemas online"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Eliminar cópia de segurança"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Alternar para ecrã inteiro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Tem a certeza de que pretende eliminar esta cópia de segurança? Esta ação não pode ser anulada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Sair do Ecrã Inteiro"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Restaurar cópia de segurança"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Desfazer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "É necessário reiniciar o Cura para restaurar a sua cópia de segurança. Pretende fechar o Cura agora?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Refazer"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cópias de segurança do Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoritos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genérico"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Ficheiro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Guardar projeto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exportar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Sair"
+msgid "Export Selection..."
+msgstr "Exportar seleção..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Vista 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Abrir &Recente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Selecionar configuração"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configurações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Personalizado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Ativado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Utilizar cola para melhor aderência com esta combinação de materiais."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Mercado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "A carregar as configurações disponíveis da impressora..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "As configurações não estão disponíveis porque a impressora está desligada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Visualizar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Vista Frente"
+msgid "&Camera position"
+msgstr "&Posição da câmara"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Vista Cima"
+msgid "Camera view"
+msgstr "Vista da câmara"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Vista Lado Esquerdo"
+msgid "Perspective"
+msgstr "Perspetiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Vista Lado Direito"
+msgid "Orthographic"
+msgstr "Ortográfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Configurar Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Adicionar Impressora..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Impressoras em rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Gerir Im&pressoras..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Impressoras locais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Gerir Materiais..."
+msgid "Visible Settings"
+msgstr "Definições Visíveis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Use o Mercado para adicionar outros materiais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Atualizar perfil com as definições/substituições atuais"
+msgid "Collapse All Categories"
+msgstr "Fechar todas as categorias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Descartar alterações atuais"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Gerir Visibilidade das Definições..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "&Criar perfil a partir das definições/substituições atuais..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Definições"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Gerir Perfis..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Mostrar &documentação online"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Reportar um &erro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Definir como Extrusor Ativo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Novidades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Ativar Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Sobre..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Desativar Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Apagar Modelo Selecionado"
-msgstr[1] "Apagar Modelos Selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Centrar modelo selecionado"
-msgstr[1] "Centrar modelos selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Imprimir Modelo Selecionado Com:"
+msgstr[1] "Imprimir modelos selecionados com:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar modelo selecionado"
+msgstr[0] "Multiplicar Modelo Selecionado"
 msgstr[1] "Multiplicar modelos selecionados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Apagar Modelo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Número de Cópias"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Ce&ntrar Modelo na Base"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Agrupar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Perfis personalizados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Desagrupar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Descartar alterações atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Combinar Modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Multiplicar Modelo..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n"
+"\n"
+"Clique para abrir o gestor de perfis."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Selecionar todos os modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Ligado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Limpar base de construção"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Desligado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Recarregar todos os modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimental"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Dispor todos os modelos em todas as bases de construção"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Recomendado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Dispor todos os modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Personalizado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Dispor seleção"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Definições de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Repor todas as posições de modelos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado."
 
-# rever!
-# Cancelar todas?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Repor Todas as Transformações do Modelo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Enchimento gradual"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Abrir Ficheiro(s)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Novo Projeto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Perfis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Mostrar pasta de configuração"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Configurar visibilidade das definições..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Suportes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mercado"
+# rever!
+# collapse ?
+# desmoronar? desabar?
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Criar estruturas para suportar partes do modelo, suspensas ou com saliências. Sem estas estruturas, essas partes do modelo podem desmoronar durante a impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Este pacote será instalado após reiniciar."
+msgid "Adhesion"
+msgstr "Aderência à Base de Construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Geral"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Permite a impressão de uma aba ou raft. Isto irá adicionar, respetivamente, uma área plana em torno ou sob a base do seu objeto, que são fáceis de retirar posteriormente."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Definições"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Não existe um perfil %1 para a configuração do extrusor %2. O objetivo predefinido será usado como alternativa"
+msgstr[1] "Não existe um perfil %1 para as configurações dos extrusores %2. O objetivo predefinido será usado como alternativa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Impressoras"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Perfis"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Impressão ativa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "A fechar %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Nome do trabalho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Tem a certeza de que pretende sair de %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Tempo de Impressão"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Tempo restante estimado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Abrir ficheiro(s)"
+msgid "Discard or Keep changes"
+msgstr "Descartar ou Manter as alterações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Instalar Pacote"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Personalizou algumas definições de perfil.\n"
+"Pretende manter estas definições alteradas depois de trocar de perfis?\n"
+"Como alternativa, pode descartar as alterações para carregar as predefinições a partir de '%1'."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Abrir ficheiro(s)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Definições do perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Alterações atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Adicionar Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Perguntar sempre isto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Novidades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Descartar e não perguntar novamente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Manter e não perguntar novamente"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Descartar alterações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Manter alterações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Acerca de %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versão: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "A Solução completa para a impressão 3D por filamento fundido."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3625,1263 +3631,1613 @@ msgstr ""
 "O Cura foi desenvolvido pela Ultimaker B.V. em colaboração com a comunidade.\n"
 "O Cura tem o prazer de utilizar os seguintes projetos open source:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Interface gráfica do utilizador"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Framework da aplicação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Gerador de G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Biblioteca de comunicação interprocessual"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Linguagem de programação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI framework"
 
 # rever!
 # use eng programing terms?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Ligações de estrutura da GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Biblioteca de ligações C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Formato de intercâmbio de dados"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Biblioteca de apoio para computação científica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Biblioteca de apoio para cálculos mais rápidos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Biblioteca de apoio para processamento de ficheiros STL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Biblioteca de apoio para processamento de objetos planos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Biblioteca de apoio para processamento de malhas triangulares"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Biblioteca de apoio para processamento de ficheiros 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Biblioteca de apoio para transmissões de fluxo e metadados de ficheiros"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Biblioteca de comunicação em série"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Biblioteca de deteção ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Biblioteca de recortes de polígonos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Verificador de tipo estático para Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Certificados de raiz para validar a credibilidade SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Biblioteca de controlo de erros de Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Biblioteca de embalagens de polígonos, desenvolvida pela Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Ligações Python para libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Tipo de letra"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Ícones SVG"
 
 # rever!
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementação da aplicação de distribuição cruzada Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Abrir ficheiro de projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Memorizar a minha escolha"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Abrir como projeto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Importar modelos"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Descartar ou Manter as alterações"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "Personalizou algumas definições de perfil.\nPretende manter estas definições alteradas depois de trocar de perfis?\nComo alternativa, pode descartar as"
-" alterações para carregar as predefinições a partir de '%1'."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Definições do perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Alterações atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Perguntar sempre isto"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Descartar e não perguntar novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Manter e não perguntar novamente"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Descartar alterações"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Manter alterações"
+msgid "Open file(s)"
+msgstr "Abrir ficheiro(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Encontrámos um ou mais projetos do Cura nos ficheiros selecionados. Só é possível abrir um Projeto do Cura, de cada vez. Sugerimos importar apenas os modelos 3D desses Projetos do Cura. Deseja continuar?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Importar tudo como modelos 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Guardar projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extrusor %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Não mostrar novamente o resumo do projeto ao guardar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Guardar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Imprimir Modelo Selecionado com o %1"
-msgstr[1] "Imprimir Modelos Selecionados com o %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Abrir ficheiro de projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Este ficheiro é um Projeto do Cura. Pretende abrir como Projeto ou só importar os modelos 3D incluídos no Projeto?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Memorizar a minha escolha"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Abrir como projeto"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Importar modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Sem título"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Ficheiro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Bem-vindo ao Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "&Editar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Visualizar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Iniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Definições"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Vazio"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensões"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ajude-nos a melhorar o Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referências"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Ajuda"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Tipos de máquina"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Novo projeto"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Utilização do material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Número de segmentos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mercado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Definições de impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configurações"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Mais informações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Esta configuração não está disponível porque não foi possível reconhecer %1. Visite %2 para transferir o perfil de material correto."
+msgid "Add printer by IP address"
+msgstr "Adicionar impressora por endereço IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Introduza o endereço IP da sua impressora."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Adicionar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mercado"
+msgid "Could not connect to device."
+msgstr "Não foi possível ligar ao dispositivo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "A carregar as configurações disponíveis da impressora..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Não se consegue ligar a uma impressora Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "As configurações não estão disponíveis porque a impressora está desligada."
+msgid "The printer at this address has not responded yet."
+msgstr "A impressora neste endereço ainda não respondeu."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Selecionar configuração"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Anterior"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Ligar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configurações"
+msgid "Add a printer"
+msgstr "Adicionar uma impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Personalizado"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Adicionar uma impressora em rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Impressora"
+msgid "Add a non-networked printer"
+msgstr "Adicionar uma impressora sem rede"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Ativado"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Material"
+msgid "Add a Cloud printer"
+msgstr "Adicionar uma impressora de cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Utilizar cola para melhor aderência com esta combinação de materiais."
+msgid "Waiting for Cloud response"
+msgstr "A aguardar resposta da cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Imprimir Modelo Selecionado Com:"
-msgstr[1] "Imprimir modelos selecionados com:"
+msgid "No printers found in your account?"
+msgstr "Não foram encontradas impressoras na sua conta?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Multiplicar Modelo Selecionado"
-msgstr[1] "Multiplicar modelos selecionados"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Adicionar impressora manualmente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Número de Cópias"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Guardar projeto..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exportar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Exportar seleção..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoritos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Ignorar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genérico"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Contrato de utilizador"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Impressoras em rede"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Rejeitar e fechar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Impressoras locais"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Abrir &Recente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Não foi encontrada nenhuma impressora na sua rede."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Atualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Adicionar impressora por IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Definir como Extrusor Ativo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Adicionar impressora de cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Ativar Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Resolução de problemas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Desativar Extrusor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabricante"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Autor do perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nome da impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Atribuir um nome à impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Atualização mais recente: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Conta Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Terminar sessão"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Iniciar sessão"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "A verificar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Conta sincronizada"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Ocorreu um problema..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Instalar atualizações pendentes"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Verificar atualizações de conta"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lista de objetos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Definições Visíveis"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Mostrar Guia de resolução de problemas online"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Fechar todas as categorias"
+msgid "Toggle Full Screen"
+msgstr "Alternar para ecrã inteiro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Gerir Visibilidade das Definições..."
+msgid "Exit Full Screen"
+msgstr "Sair do Ecrã Inteiro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Desfazer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Refazer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Sair"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Posição da câmara"
+msgid "3D View"
+msgstr "Vista 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Vista da câmara"
+msgid "Front View"
+msgstr "Vista Frente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspetiva"
+msgid "Top View"
+msgstr "Vista Cima"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortográfica"
+msgid "Left Side View"
+msgstr "Vista Lado Esquerdo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Base de construção"
+msgid "Right Side View"
+msgstr "Vista Lado Direito"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Sem ligação a uma impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Configurar Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "A impressora não aceita comandos"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Adicionar Impressora..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Em manutenção. Verifique a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Gerir Im&pressoras..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Perdeu-se a ligação com a impressora"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Gerir Materiais..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "A imprimir..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Use o Mercado para adicionar outros materiais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Em pausa"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Atualizar perfil com as definições/substituições atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "A preparar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Descartar alterações atuais"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Remova a impressão"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "&Criar perfil a partir das definições/substituições atuais..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Gerir Perfis..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Mostrar &documentação online"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Reportar um &erro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Novidades"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Sobre..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Apagar Modelo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Ce&ntrar Modelo na Base"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Agrupar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Desagrupar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Combinar Modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Multiplicar Modelo..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Selecionar todos os modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Limpar base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Recarregar todos os modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Dispor todos os modelos em todas as bases de construção"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Dispor todos os modelos"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Dispor seleção"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Repor todas as posições de modelos"
+
+# rever!
+# Cancelar todas?
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Repor Todas as Transformações do Modelo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Abrir Ficheiro(s)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Novo Projeto..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Mostrar pasta de configuração"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Configurar visibilidade das definições..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Mercado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Calculado"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Definição"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Atual"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Unidade"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informações"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Confirmar Alteração de Diâmetro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Cancelar impressão"
+msgid "Display Name"
+msgstr "Nome"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Tem a certeza de que deseja cancelar a impressão?"
+msgid "Material Type"
+msgstr "Tipo de Material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "É imprimido como suporte."
+msgid "Color"
+msgstr "Cor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Foram modificados outros modelos sobrepostos com este modelo."
+msgid "Properties"
+msgstr "Propriedades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Foi modificada a sobreposição de enchimento com este modelo."
+msgid "Density"
+msgstr "Densidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Não são suportadas sobreposições com este modelo."
+msgid "Diameter"
+msgstr "Diâmetro"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Substitui %1 definição."
-msgstr[1] "Substitui %1 definições."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Custo do Filamento"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lista de objetos"
+msgid "Filament weight"
+msgstr "Peso do Filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Comprimento do filamento"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Custo por Metro"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Este material está associado a %1 e partilha algumas das suas propriedades."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Desassociar Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Descrição"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Informações de Aderência"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Ativar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Criar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Duplicar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exportar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Impressora"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Confirmar Remoção"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Tem a certeza de que deseja remover o perfil %1? Não é possível desfazer esta ação!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Importar material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Material <filename>%1</filename> importado com êxito"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Exportar Material"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Material exportado com êxito para <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Impressoras"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Mudar Nome"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Perfis"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Criar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Duplicar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Criar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Forneça um nome para este perfil."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Duplicar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Mudar Nome do Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Importar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Exportar Perfil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Impressora: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Atualizar perfil com as definições/substituições atuais"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Este perfil utiliza as predefinições especificadas pela impressora, pelo que não tem quaisquer definições/substituições na lista seguinte."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "As suas definições atuais correspondem ao perfil selecionado."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Definições Globais"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Visibilidade das Definições"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Selecionar tudo"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Geral"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Moeda:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Tema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "É necessário reiniciar a aplicação para que estas alterações sejam aplicadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Seccionar automaticamente ao alterar as definições."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Seccionar automaticamente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Comportamento da janela"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Realçar, a vermelho, as áreas do modelo sem apoio. Sem suporte, estas áreas podem não ser impressas correctamente."
 
 # rever!
 # consolas?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Mostrar Saliências (Overhangs)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Destaque as superfícies extra ou em falta do modelo utilizando sinais de aviso. As trajetórias de ferramentas irão falhar muitas vezes partes da geometria pretendida."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Apresentar erros de modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Move a câmara de forma que o modelo fique no centro da visualização quando é selecionado um modelo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Centrar câmara ao selecionar item"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "O comportamento de zoom predefinido do Cura deve ser invertido?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Inverta a direção do zoom da câmera."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "O zoom deve deslocar-se na direção do rato?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Fazer zoom em direção ao rato não é suportado na perspetiva ortográfica."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Fazer Zoom na direção do rato"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Os modelos, na plataforma, devem ser movidos para que não se intersectem?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Garantir que os modelos não se interceptam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Pousar os modelos na base de construção?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Pousar automaticamente os modelos na base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Mostrar mensagem de aviso no leitor de g-code."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Mensagem de aviso no leitor de g-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "A vista por camada deve ser forçada a utilizar o modo de compatibilidade?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Forçar o modo de compatibilidade na visualização por camada (é necessário reiniciar)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "O Cura deve abrir na localização onde foi fechado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Restaurar posição da janela ao iniciar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Que tipo de composição de câmara deve ser utilizado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Composição de câmara:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspetiva"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortográfica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Abrir e guardar ficheiros"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Pretende que os ficheiros abertos a partir do ambiente de trabalho ou de aplicações externas sejam executados na mesma instância do Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Utilizar uma única instância do Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Os modelos devem ser redimensionados até ao volume de construção se forem demasiado grandes?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Redimensionar modelos demasiado grandes"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Um modelo pode parecer extremamente pequeno se, por exemplo, este tiver sido criado em metros e não em milímetros. Estes modelos devem ser redimensionados?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Redimensionar modelos extremamente pequenos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Selecionar os modelos depois de abertos?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Selecionar os modelos depois de abertos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Deve um prefixo com base no nome da impressora ser adicionado ao nome do trabalho de impressão automaticamente?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Adicionar prefixo da máquina ao nome do trabalho"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Deve ser apresentado um resumo ao guardar um ficheiro de projeto?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Mostrar caixa de diálogo de resumo ao guardar projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Comportamento predefinido ao abrir um ficheiro de projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Comportamento predefinido ao abrir um ficheiro de projeto: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Perguntar sempre isto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Abrir sempre como projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importar sempre modelos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Quando tiver realizado alterações a um perfil e mudado para outro, será apresentada uma caixa de diálogo a perguntar se pretende manter as alterações. Caso contrário, pode escolher um comportamento predefinido, sendo que a caixa de diálogo nunca mais é apresentada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Perfis"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Comportamento predefinido para valores de definição alterados ao mudar para um perfil diferente: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Descartar sempre definições alteradas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Transferir sempre definições alteradas para o novo perfil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacidade"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "O Cura deve procurar atualizações quando o programa é iniciado?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Procurar atualizações ao iniciar"
 
 # rever!
 # legal wording
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Podem alguns dados anónimos sobre a impressão ser enviados para a Ultimaker? Não são enviadas, nem armazenadas, quaisquer informações pessoais, incluindo modelos, endereços IP ou outro tipo de identificação pessoal."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Enviar dados (anónimos) sobre a impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Mais informações"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Ativar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Mudar Nome"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Criar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Duplicar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exportar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Confirmar Remoção"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Tem a certeza de que deseja remover o perfil %1? Não é possível desfazer esta ação!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Importar material"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Não foi possível importar o material <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Ver tipo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Material <filename>%1</filename> importado com êxito"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Sem ligação a uma impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Exportar Material"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "A impressora não aceita comandos"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Falha ao exportar material para <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Em manutenção. Verifique a impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Material exportado com êxito para <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Perdeu-se a ligação com a impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informações"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "A imprimir..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Confirmar Alteração de Diâmetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Em pausa"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "O novo diâmetro do filamento está definido como %1 mm, o que não é compatível com o extrusor actual. Pretende prosseguir?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "A preparar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Nome"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Remova a impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Tipo de Material"
+msgid "Abort Print"
+msgstr "Cancelar impressão"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Cor"
+msgid "Are you sure you want to abort the print?"
+msgstr "Tem a certeza de que deseja cancelar a impressão?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Propriedades"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Procurar definições"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Densidade"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Copiar valor para todos os extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diâmetro"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Copiar todos os valores alterados para todos os extrusores"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Custo do Filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Esconder esta definição"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Peso do Filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Não mostrar esta definição"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Comprimento do filamento"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Manter esta definição visível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+# rever!
+# ocultas?
+# escondidas?
+# valor normal? automatico?
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Custo por Metro"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n"
+"\n"
+"Clique para tornar estas definições visíveis."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Este material está associado a %1 e partilha algumas das suas propriedades."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Desassociar Material"
+# rever!
+# Afeta?
+# Influencia?
+# Altera?
+# Modifica?
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Modifica"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Descrição"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Modificado Por"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Informações de Aderência"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Definições de impressão"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Criar"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Esta definição tem um valor que é diferente do perfil.\n"
+"\n"
+"Clique para restaurar o valor do perfil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Duplicar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Criar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Forneça um nome para este perfil."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Duplicar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Mudar Nome do Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Importar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Exportar Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Impressora: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Atualizar perfil com as definições/substituições atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Descartar alterações atuais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Este perfil utiliza as predefinições especificadas pela impressora, pelo que não tem quaisquer definições/substituições na lista seguinte."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "As suas definições atuais correspondem ao perfil selecionado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Definições Globais"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Calculado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Definição"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n"
+"\n"
+"Clique para restaurar o valor calculado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Perfil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Vista 3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Atual"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Vista Frente"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Unidade"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Vista Cima"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Visibilidade das Definições"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Vista esquerda"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Selecionar tudo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Vista direita"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extrusor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "A temperatura-alvo do extrusor. O extrusor irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento do extrusor será desligado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "A temperatura atual deste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "A temperatura-alvo de preaquecimento do extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Preaquecer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Aquecer o extrusor com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que o extrusor aqueça quando começar a impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "A cor do material neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "O material neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "O nozzle inserido neste extrusor."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Base de construção"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "A temperatura desejada da base aquecida. A base irá aquecer ou arrefecer até esta temperatura. Se esta opção for definida como 0, o aquecimento da base será desligado."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "A temperatura atual da base aquecida."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "A temperatura de pré-aquecimento da base."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Aqueçer a base com antecedência antes de imprimir. Pode continuar a ajustar as definições de impressão durante o aquecimento e não precisará de esperar que a base aqueça quando começar a impressão."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Controlo da impressora"
@@ -4889,17 +5245,17 @@ msgstr "Controlo da impressora"
 # rever!
 # contexto?!
 # Jog?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Posição de deslocação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
@@ -4907,745 +5263,495 @@ msgstr "Z"
 # rever!
 # contexto?!
 # Jog?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Distância de deslocação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Enviar G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Enviar um comando G-code personalizado para a impressora ligada. Prima \"Enter\" para enviar o comando."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "A impressora não está ligada."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Adicionar Impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Gerir impressoras"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Impressoras ligadas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Impressoras predefinidas"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Impressão ativa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Nome do trabalho"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Tempo de Impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Tempo restante estimado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Profile"
-msgstr "Perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Alguns valores de definição/substituição são diferentes dos valores armazenados no perfil.\n"
-"\n"
-"Clique para abrir o gestor de perfis."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Perfis personalizados"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Não existe um perfil %1 para a configuração do extrusor %2. O objetivo predefinido será usado como alternativa"
-msgstr[1] "Não existe um perfil %1 para as configurações dos extrusores %2. O objetivo predefinido será usado como alternativa"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Configuração de impressão desativada. O ficheiro G-code não pode ser modificado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Recomendado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Personalizado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Ligado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Desligado"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimental"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Aderência à Base de Construção"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Permite a impressão de uma aba ou raft. Isto irá adicionar, respetivamente, uma área plana em torno ou sob a base do seu objeto, que são fáceis de retirar posteriormente."
+msgid "Is printed as support."
+msgstr "É imprimido como suporte."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Enchimento gradual"
+msgid "Other models overlapping with this model are modified."
+msgstr "Foram modificados outros modelos sobrepostos com este modelo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "O enchimento gradual irá aumentar progressivamente a densidade do enchimento em direção ao topo."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Algumas definições do perfil foram modificadas. Se pretender alterá-las, aceda ao modo Personalizado."
+msgid "Infill overlapping with this model is modified."
+msgstr "Foi modificada a sobreposição de enchimento com este modelo."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Suportes"
+msgid "Overlaps with this model are not supported."
+msgstr "Não são suportadas sobreposições com este modelo."
 
-# rever!
-# collapse ?
-# desmoronar? desabar?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Criar estruturas para suportar partes do modelo, suspensas ou com saliências. Sem estas estruturas, essas partes do modelo podem desmoronar durante a impressão."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Substitui %1 definição."
+msgstr[1] "Substitui %1 definições."
 
-# rever!
-# ocultas?
-# escondidas?
-# valor normal? automatico?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Algumas das definições invisíveis têm valores diferentes dos valores normais calculados automaticamente.\n"
-"\n"
-"Clique para tornar estas definições visíveis."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mercado"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Esta definição não é utilizada porque todas as definições influenciadas foram substituídas."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "&Editar"
 
-# rever!
-# Afeta?
-# Influencia?
-# Altera?
-# Modifica?
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Modifica"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensões"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Modificado Por"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referências"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Esta definição é sempre partilhada entre todos os extrusores. Ao alterá-la aqui, o valor será alterado em todos os extrusores."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Ajuda"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Esta definição está resolvida a partir de valores específicos da extrusora em conflito:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Novo projeto"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Esta definição tem um valor que é diferente do perfil.\n"
-"\n"
-"Clique para restaurar o valor do perfil."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Tem a certeza de que deseja iniciar um novo projeto? Isto irá apagar tudo na base de construção assim como quaisquer definições que não tenham sido guardadas."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Normalmente, o valor desta definição é calculado, mas atualmente tem definido um valor diferente.\n"
-"\n"
-"Clique para restaurar o valor calculado."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Procurar definições"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Copiar valor para todos os extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Copiar todos os valores alterados para todos os extrusores"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Esconder esta definição"
+msgid "This package will be installed after restarting."
+msgstr "Este pacote será instalado após reiniciar."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Não mostrar esta definição"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Definições"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Manter esta definição visível"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "A fechar %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Vista 3D"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Tem a certeza de que pretende sair de %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Vista Frente"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Instalar Pacote"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Vista Cima"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Abrir ficheiro(s)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Vista esquerda"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Encontrámos um ou mais ficheiros G-code nos ficheiros selecionados. Só é possível abrir um ficheiro G-code de cada vez. Se pretender abrir um ficheiro G-code, selecione apenas um."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Vista direita"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Adicionar Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Ver tipo"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Novidades"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Adicionar uma impressora de cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "A impressora de cloud está offline. Verifique se a impressora está ligada e conectada à Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "A aguardar resposta da cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Esta impressora não está associada à sua conta. Visite a Ultimaker Digital Factory para estabelecer uma ligação."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Não foram encontradas impressoras na sua conta?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "A conectividade de cloud está atualmente indisponível. Inicie sessão para estabelecer ligação com a impressora de cloud."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "As seguintes impressoras na sua conta foram adicionadas no Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "A conectividade de cloud está atualmente indisponível. Verifique a sua ligação à Internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Adicionar impressora manualmente"
+msgid "Add printer"
+msgstr "Adicionar Impressora"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Concluir"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabricante"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Autor do perfil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Nome da impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Atribuir um nome à impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Adicionar uma impressora"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Adicionar uma impressora em rede"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Adicionar uma impressora sem rede"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Não foi encontrada nenhuma impressora na sua rede."
+msgid "Manage printers"
+msgstr "Gerir impressoras"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Atualizar"
+msgid "Connected printers"
+msgstr "Impressoras ligadas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Adicionar impressora por IP"
+msgid "Preset printers"
+msgstr "Impressoras predefinidas"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Adicionar impressora de cloud"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Imprimir Modelo Selecionado com o %1"
+msgstr[1] "Imprimir Modelos Selecionados com o %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Resolução de problemas"
+msgid "Time estimation"
+msgstr "Estimativa de tempo"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Adicionar impressora por endereço IP"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Introduza o endereço IP da sua impressora."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Adicionar"
+msgid "Material estimation"
+msgstr "Estimativa de material"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Não foi possível ligar ao dispositivo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Não se consegue ligar a uma impressora Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "A impressora neste endereço ainda não respondeu."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "A Seccionar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Não foi possível adicionar esta impressora porque é uma impressora desconhecida ou não aloja um grupo."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Não é possível seccionar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Anterior"
+msgid "Processing"
+msgstr "A processar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Ligar"
+msgid "Slice"
+msgstr "Segmentação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Conta Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "A chave para a impressão 3D em rede"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "Personalize a sua experiência com mais perfis e plug-ins de impressão"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker"
+msgid "Start the slicing process"
+msgstr "Iniciar o processo de segmentação"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Ignorar"
+msgid "Cancel"
+msgstr "Cancelar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ajude-nos a melhorar o Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Nenhuma estimativa de tempo disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "O Ultimaker Cura recolhe dados anónimos para melhorar a qualidade da impressão e a experiência do utilizador, incluindo:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Nenhuma estimativa de custos disponível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Tipos de máquina"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Pré-visualizar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Utilização do material"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Fornece suporte de ligação da unidade amovível e suporte de gravação."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Número de segmentos"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Plug-in de dispositivo de saída da unidade amovível"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Definições de impressão"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Os dados recolhidos pelo Ultimaker Cura não conterão quaisquer informações pessoais."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Atualização da versão 3.5 para 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Mais informações"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Vazio"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Atualização da versão 4.6.2 para a versão 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Contrato de utilizador"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Rejeitar e fechar"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Atualização da versão 2.2 para 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Bem-vindo ao Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Siga estes passos para configurar o\n"
-"Ultimaker Cura. Este processo deverá demorar apenas alguns momentos."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Atualização da versão 4.2 para 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Iniciar"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Atualiza as configurações do Cura 4.6.0 para o Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Novidades no Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Atualização da versão 4.6.0 para a versão 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Verificador de Modelos"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Atualização da versão 3.0 para 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Fornece suporte para ler ficheiros 3MF."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Leitor de 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Atualização da versão 4.0 para 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Possiblita a gravação de ficheiros 3MF."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Gravador 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Atualização da versão 2.6 para 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Fornece suporte para ler ficheiros AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Leitor de AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Atualização da versão 2.5 para 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Efetua uma cópia de segurança e repõe a sua configuração."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cópias de segurança do Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Atualização da versão 4.1 para 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Back-end do CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Atualização da versão 2.1 para 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Fornece suporte para importar perfis Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Leitor de Perfis Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Atualização da versão 3.2 para 3.3"
 
-# rever!
-# Fornece suporte para exportar perfis Cura.
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Possibilita a exportação de perfis do Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Gravador de perfis Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Atualização da versão 4.5 para a versão 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Procura e verifica se existem atualizações de firmware."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Verificador Atualizações Firmware"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Atualização da versão 4.4 para a versão 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Disponibiliza as ações da máquina para atualizar o firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Atualizador de firmware"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Atualização da versão 4.7 para 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Lê o g-code a partir de um arquivo comprimido."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Leitor de G-code comprimido"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Atualização da versão 3.3 para 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Grava o g-code num arquivo comprimido."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Gravador de G-code comprimido"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Atualização da versão 4.3 para 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Permite importar perfis a partir de ficheiros g-code."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Leitor de perfis G-code"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Atualização da versão 3.4 para 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Permite abrir e visualizar ficheiros G-code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Leitor de G-code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Atualização da versão 2.7 para 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Grava o g-code num ficheiro."
+msgid "Provides support for reading AMF files."
+msgstr "Fornece suporte para ler ficheiros AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Gravador de G-code"
+msgid "AMF Reader"
+msgstr "Leitor de AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Permite importar perfis a partir de ficheiros g-code."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Leitor de imagens"
+msgid "G-code Profile Reader"
+msgstr "Leitor de perfis G-code"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Permite importar perfis de versões antigas do Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Disponibiliza as ações da máquina para atualizar o firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Leitor de perfis antigos do Cura"
+msgid "Firmware Updater"
+msgstr "Atualizador de firmware"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)."
+msgid "Provides support for reading X3D files."
+msgstr "Fornece suporte para ler ficheiros X3D."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Função Definições da Máquina"
+msgid "X3D Reader"
+msgstr "Leitor de X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Fornece uma fase de monitorização no Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Encontre, organize e instale novos pacotes para o Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Fase de monitorização"
+msgid "Toolbox"
+msgstr "Toolbox"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5667,76 +5773,117 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Pós-Processamento"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Fornece uma fase de preparação no Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Fornece a hiperligação para o back-end de seccionamento do CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Fase de preparação"
+msgid "CuraEngine Backend"
+msgstr "Back-end do CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Fornece uma fase de pré-visualização no Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Fase de pré-visualização"
+msgid "USB printing"
+msgstr "Impressão USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+# rever!
+# Fornece suporte para exportar perfis Cura.
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Fornece suporte de ligação da unidade amovível e suporte de gravação."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Possibilita a exportação de perfis do Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Plug-in de dispositivo de saída da unidade amovível"
+msgid "Cura Profile Writer"
+msgstr "Gravador de perfis Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\""
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry Logger"
+msgid "Ultimaker Network Connection"
+msgstr "Ligação de rede Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Permite a visualização por camadas."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)."
 
-# rever!
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Visualização por camadas"
+msgid "Ultimaker machine actions"
+msgstr "Funções para impressoras Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências."
+msgid "Provides support for reading 3MF files."
+msgstr "Fornece suporte para ler ficheiros 3MF."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Informações do seccionamento"
+msgid "3MF Reader"
+msgstr "Leitor de 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Permite a visualização (simples) dos objetos como sólidos."
+msgid "Writes g-code to a compressed archive."
+msgstr "Grava o g-code num arquivo comprimido."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Vista Sólidos"
+msgid "Compressed G-code Writer"
+msgstr "Gravador de G-code comprimido"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Lê o g-code a partir de um arquivo comprimido."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Leitor de G-code comprimido"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Verifica potenciais problemas de impressão nos modelos e definições de impressão, e oferece sugestões."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Verificador de Modelos"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Procura e verifica se existem atualizações de firmware."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Verificador Atualizações Firmware"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Permite abrir e visualizar ficheiros G-code."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Leitor de G-code"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5748,16 +5895,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Eliminador de suportes"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Encontre, organize e instale novos pacotes para o Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Toolbox"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5768,6 +5905,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Leitor de Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Regista determinados eventos para que possam ser utilizados pelo \"crash reporter\""
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentry Logger"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5778,265 +5925,254 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Leitor de UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Permite a gravação de arquivos Ultimaker Format."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Gravador de UFP"
-
-#: UltimakerMachineActions/plugin.json
-msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Disponibiliza funções especificas para as máquinas Ultimaker (tais como, o assistente de nivelamento da base, seleção de atualizações, etc.)."
-
-#: UltimakerMachineActions/plugin.json
-msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Funções para impressoras Ultimaker"
-
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Gere as ligações de rede com as impressoras em rede Ultimaker."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Permite importar perfis de versões antigas do Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ligação de rede Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Leitor de perfis antigos do Cura"
 
-#: USBPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Aceita G-Codes e envia-os para uma impressora. O plug-in também pode atualizar firmware."
+msgid "Provides a prepare stage in Cura."
+msgstr "Fornece uma fase de preparação no Cura."
 
-#: USBPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Impressão USB"
+msgid "Prepare Stage"
+msgstr "Fase de preparação"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Atualiza as configurações do Cura 2.1 para o Cura 2.2."
+msgid "Provides a monitor stage in Cura."
+msgstr "Fornece uma fase de monitorização no Cura."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Atualização da versão 2.1 para 2.2"
+msgid "Monitor Stage"
+msgstr "Fase de monitorização"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Atualiza as configurações do Cura 2.2 para o Cura 2.4."
+msgid "Provides the X-Ray view."
+msgstr "Permite a visualização em Raio-X."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Atualização da versão 2.2 para 2.4"
+msgid "X-Ray View"
+msgstr "Vista Raio-X"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Atualiza as configurações do Cura 2.5 para o Cura 2.6."
+msgid "Provides support for writing 3MF files."
+msgstr "Possiblita a gravação de ficheiros 3MF."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Atualização da versão 2.5 para 2.6"
+msgid "3MF Writer"
+msgstr "Gravador 3MF"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Atualiza as configurações do Cura 2.6 para o Cura 2.7."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Envia informações anónimas sobre o seccionamento. Pode ser desativado nas preferências."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Atualização da versão 2.6 para 2.7"
+msgid "Slice info"
+msgstr "Informações do seccionamento"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Atualiza as configurações do Cura 2.7 para o Cura 3.0."
+msgid "Provides a preview stage in Cura."
+msgstr "Fornece uma fase de pré-visualização no Cura."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Atualização da versão 2.7 para 3.0"
+msgid "Preview Stage"
+msgstr "Fase de pré-visualização"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Atualiza as configurações do Cura 3.0 para o Cura 3.1."
+msgid "Provides the Simulation view."
+msgstr "Permite a visualização por camadas."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+# rever!
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Atualização da versão 3.0 para 3.1"
+msgid "Simulation View"
+msgstr "Visualização por camadas"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Atualiza as configurações do Cura 3.2 para o Cura 3.3."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Proporciona uma forma de alterar as definições da máquina (tal como o volume de construção, o tamanho do nozzle, etc.)."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Atualização da versão 3.2 para 3.3"
+msgid "Machine Settings Action"
+msgstr "Função Definições da Máquina"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Atualiza as configurações do Cura 3.3 para o Cura 3.4."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Atualização da versão 3.3 para 3.4"
+msgid "Material Profiles"
+msgstr "Perfis de Materiais"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Atualiza as configurações do Cura 3.4 para o Cura 3.5."
+msgid "Provides a normal solid mesh view."
+msgstr "Permite a visualização (simples) dos objetos como sólidos."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Atualização da versão 3.4 para 3.5"
+msgid "Solid View"
+msgstr "Vista Sólidos"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Atualiza as configurações do Cura 3.5 para o Cura 4.0."
+msgid "Provides support for importing Cura profiles."
+msgstr "Fornece suporte para importar perfis Cura."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Atualização da versão 3.5 para 4.0"
+msgid "Cura Profile Reader"
+msgstr "Leitor de Perfis Cura"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Atualiza as configurações do Cura 4.0 para o Cura 4.1."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Permite a gravação de arquivos Ultimaker Format."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Atualização da versão 4.0 para 4.1"
+msgid "UFP Writer"
+msgstr "Gravador de UFP"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Atualiza as configurações do Cura 4.1 para o Cura 4.2."
+msgid "Writes g-code to a file."
+msgstr "Grava o g-code num ficheiro."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Atualização da versão 4.1 para 4.2"
+msgid "G-code Writer"
+msgstr "Gravador de G-code"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Atualiza as configurações do Cura 4.2 para o Cura 4.3."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Permite gerar geometria imprimível a partir de ficheiros de imagem 2D."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Atualização da versão 4.2 para 4.3"
+msgid "Image Reader"
+msgstr "Leitor de imagens"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Configurações de atualizações do Cura 4.3 para o Cura 4.4."
+msgid "Backup and restore your configuration."
+msgstr "Efetua uma cópia de segurança e repõe a sua configuração."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Atualização da versão 4.3 para 4.4"
-
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Atualiza as configurações do Cura 4.4 para o Cura 4.5."
+msgid "Cura Backups"
+msgstr "Cópias de segurança do Cura"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Atualização da versão 4.4 para a versão 4.5"
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "A pilha global está em falta."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Atualiza as configurações do Cura 4.5 para o Cura 4.6."
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "O seu modelo não é uma variedade. As áreas destacadas indicam superfícies extra ou em falta."
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Atualização da versão 4.5 para a versão 4.6"
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Erros de modelo"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Atualiza as configurações do Cura 4.6.0 para o Cura 4.6.2."
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Espessura da Camada"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Atualização da versão 4.6.0 para a versão 4.6.2"
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "A chave para a impressão 3D em rede"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Atualiza as configurações do Cura 4.6.2 para o Cura 4.7."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Personalize a sua experiência com mais perfis e plug-ins de impressão\n"
+#~ "- Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local\n"
+#~ "- Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Atualização da versão 4.6.2 para a versão 4.7"
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Criar conta"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Apagar Modelo Selecionado"
+#~ msgstr[1] "Apagar Modelos Selecionados"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Centrar modelo selecionado"
+#~ msgstr[1] "Centrar modelos selecionados"
+
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Multiplicar modelo selecionado"
+#~ msgstr[1] "Multiplicar modelos selecionados"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Atualiza as configurações do Cura 4.7 para o Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Concluir"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Atualização da versão 4.7 para 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Conta Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Fornece suporte para ler ficheiros X3D."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "A chave para a impressão 3D em rede"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Leitor de X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "Personalize a sua experiência com mais perfis e plug-ins de impressão"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Fornece capacidades para ler e gravar perfis de material com base em XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "Mantenha a sua flexibilidade. Sincronize a sua configuração e carregue-a em qualquer local"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Perfis de Materiais"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "Aumente a eficiência com um fluxo de trabalho remoto nas impressoras Ultimaker"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Permite a visualização em Raio-X."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Siga estes passos para configurar o\n"
+#~ "Ultimaker Cura. Este processo deverá demorar apenas alguns momentos."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Vista Raio-X"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Novidades no Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/pt_PT/fdmextruder.def.json.po b/resources/i18n/pt_PT/fdmextruder.def.json.po
index 1a2952698a..cb6e737958 100644
--- a/resources/i18n/pt_PT/fdmextruder.def.json.po
+++ b/resources/i18n/pt_PT/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-14 14:15+0100\n"
 "Last-Translator: Portuguese <info@bothof.nl>\n"
 "Language-Team: Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
diff --git a/resources/i18n/pt_PT/fdmprinter.def.json.po b/resources/i18n/pt_PT/fdmprinter.def.json.po
index d5b4f4c196..7abf810c60 100644
--- a/resources/i18n/pt_PT/fdmprinter.def.json.po
+++ b/resources/i18n/pt_PT/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Portuguese <info@lionbridge.com>, Paulo Miranda <av@utopica3d.com>, Portuguese <info@bothof.nl>\n"
@@ -425,6 +425,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Se, as extrusoras partilham um único aquecedor em vez de cada extrusora ter o seu próprio aquecedor."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Áreas não permitidas"
@@ -491,8 +511,8 @@ msgstr "Desviar com extrusor"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Aplicar o desvio do extrusor ao sistema de coordenadas."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -897,8 +917,8 @@ msgstr "Multiplicador do diâmetro da linha da camada inicial. Aumentar o diâme
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Invólucro"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -968,168 +988,6 @@ msgctxt "wall_0_wipe_dist description"
 msgid "Distance of a travel move inserted after the outer wall, to hide the Z seam better."
 msgstr "A distância de um movimento de deslocação inserido depois da parede exterior, para ocultar melhor a junta Z."
 
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extrusor Revestimento Superior"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "O núcleo de extrusão utilizado para imprimir a(s) camada(s) de revestimento das superfícies mais superiores. Definição usada com múltiplos extrusores."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Camadas Revestimento Superior"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "O número de camadas de revestimento da superfície superior. Por norma, uma só camada superior é suficiente para gerar superfícies superiores de maior qualidade."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extrusor Superior / Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "O núcleo de extrusão utilizado para imprimir as camadas superiores e inferiores da impressão. Definição usada com múltiplos extrusores."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Espessura Superior / Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "A espessura total das camadas superiores e inferiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas superiores / inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Espessura Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "A espessura total das camadas superiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas superiores."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Camadas Superiores"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "O número de camadas superiores. Quando calculado através da Espessura Superior, este valor é arredondado para um número inteiro."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Espessura Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "A espessura total das camadas inferiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas inferiores."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Camadas Inferiores"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "O número de camadas inferiores. Quando calculado através da Espessura Inferior, este valor é arredondado para um número inteiro."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Camadas inferiores iniciais"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "O número de camadas inferiores iniciais, a partir da base de construção no sentido ascendente. Quando calculado pela espessura inferior, este valor é arredondado para um número inteiro."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Padrão Superior / Inferior"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "O padrão geométrico das camadas superiores / inferiores."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Linhas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concêntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Ziguezague"
-
-# Is the English string correct? meaning?
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Padrão da Base na Camada Inicial"
-
-# Is the English string correct? meaning?
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "O padrão geométrico da base da peça na camada inicial."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Linhas"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concêntrico"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Ziguezague"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Ligar polígonos superiores/inferiores"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Ligar caminhos de revestimento superiores/inferiores quando as trajetórias são paralelas. Para o padrão concêntrico, ativar esta definição reduz consideravelmente o tempo de deslocação mas, uma vez que as ligações podem suceder num ponto intermediário sobre o enchimento, esta funcionalidade pode reduzir a qualidade da superfície superior."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Direções Linha Superior / Inferior"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Uma lista de ângulos (números inteiros) relativos às direções de linha a utilizar quando as camadas da superfície superiores/inferiores utilizarem os padrões de Linhas ou Ziguezague. Os valores da lista são utilizados em sequência, à medida que as camadas progridem, voltando ao início assim que a lista chega ao fim. Os itens da lista são separados por vírgulas e a lista completa é escrita entre parênteses retos. Por defeito a lista está vazia, o que significa a utilização dos ângulos predefinidos tradicionais (45 e 135 graus)."
-
 # Inserção?
 # desvio?
 # Movimento?
@@ -1460,6 +1318,178 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Quando ativado, as coordenadas da junta-Z são relativas ao centro de cada peça. Quando desativado, as coordenadas definem uma posição absoluta na base de construção."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extrusor Revestimento Superior"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "O núcleo de extrusão utilizado para imprimir a(s) camada(s) de revestimento das superfícies mais superiores. Definição usada com múltiplos extrusores."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Camadas Revestimento Superior"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "O número de camadas de revestimento da superfície superior. Por norma, uma só camada superior é suficiente para gerar superfícies superiores de maior qualidade."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extrusor Superior / Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "O núcleo de extrusão utilizado para imprimir as camadas superiores e inferiores da impressão. Definição usada com múltiplos extrusores."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Espessura Superior / Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "A espessura total das camadas superiores e inferiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas superiores / inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Espessura Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "A espessura total das camadas superiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas superiores."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Camadas Superiores"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "O número de camadas superiores. Quando calculado através da Espessura Superior, este valor é arredondado para um número inteiro."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Espessura Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "A espessura total das camadas inferiores na impressão. Este valor, dividido pela Espessura das Camadas, define o número de camadas inferiores."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Camadas Inferiores"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "O número de camadas inferiores. Quando calculado através da Espessura Inferior, este valor é arredondado para um número inteiro."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Camadas inferiores iniciais"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "O número de camadas inferiores iniciais, a partir da base de construção no sentido ascendente. Quando calculado pela espessura inferior, este valor é arredondado para um número inteiro."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Padrão Superior / Inferior"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "O padrão geométrico das camadas superiores / inferiores."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Linhas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concêntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Ziguezague"
+
+# Is the English string correct? meaning?
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Padrão da Base na Camada Inicial"
+
+# Is the English string correct? meaning?
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "O padrão geométrico da base da peça na camada inicial."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Linhas"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concêntrico"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Ziguezague"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Ligar polígonos superiores/inferiores"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Ligar caminhos de revestimento superiores/inferiores quando as trajetórias são paralelas. Para o padrão concêntrico, ativar esta definição reduz consideravelmente o tempo de deslocação mas, uma vez que as ligações podem suceder num ponto intermediário sobre o enchimento, esta funcionalidade pode reduzir a qualidade da superfície superior."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Direções Linha Superior / Inferior"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Uma lista de ângulos (números inteiros) relativos às direções de linha a utilizar quando as camadas da superfície superiores/inferiores utilizarem os padrões de Linhas ou Ziguezague. Os valores da lista são utilizados em sequência, à medida que as camadas progridem, voltando ao início assim que a lista chega ao fim. Os itens da lista são separados por vírgulas e a lista completa é escrita entre parênteses retos. Por defeito a lista está vazia, o que significa a utilização dos ângulos predefinidos tradicionais (45 e 135 graus)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Sem Revestimento nos Espaços Z"
@@ -1608,6 +1638,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Ajuste a quantidade de sobreposição entre as paredes e (as extremidades) das linhas centrais de revestimento. Uma ligeira sobreposição permite que as paredes se liguem firmemente ao revestimento. Observe que no caso de um revestimento e uma largura de revestimento da parede iguais, qualquer valor acima da metade da largura da parede pode fazer com que o revestimento ultrapasse a parede, visto que a posição do nozzle do extrusor de revestimento pode já ultrapassar o centro da parede."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Largura Remoção Revestimento"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "A largura máxima das áreas do revestimento a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento superior/inferior nas superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Largura Remoção Revestimento Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "A largura máxima das áreas do revestimento superior a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento superior nas superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Largura Remoção Revestimento Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "A largura máxima das áreas do revestimento inferior a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento inferior nas superfícies inclinadas do modelo."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Distância Expansão Revestimento"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "A distância da expansão dos revestimentos para dentro do enchimento. Valores mais elevados melhoram tanto a fixação do revestimento ao padrão geométrico de enchimento, assim como a aderência ao revestimento das paredes de camadas adjacentes. Valores mais baixos reduzem a quantidade de material utilizado."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Distância Expansão Revestimento Superior"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "A distância da expansão dos revestimentos superiores para dentro do enchimento. Valores mais elevados melhoram, tanto, a fixação do revestimento ao padrão geométrico do enchimento, assim como a aderência ao revestimento das paredes da camada seguinte. Valores mais baixos reduzem a quantidade de material utilizado."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Expansão Revestimento Inferior"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "A distância da expansão dos revestimentos inferiores para dentro do enchimento. Valores mais elevados melhoram, tanto, a fixação do revestimento ao padrão geométrico de enchimento, assim como a aderência do revestimento às paredes da camada anterior. Valores mais baixos reduzem a quantidade de material utilizado."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Ângulo Revestimento para Expansão"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Largura Mínima Revestimento para Expansão"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "As áreas de revestimento mais pequenas do que este valor não são expandidas. Isto evita a expansão das pequenas áreas de revestimento que são criadas quando a superfície do modelo apresenta uma inclinação quase vertical."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Enchimento"
@@ -1922,86 +2032,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "O ângulo mínimo das saliências internas ao qual é adicionado enchimento. Com um valor de 0° os objetos são totalmente preenchidos com enchimento, e com um valor de 90° não é produzido qualquer enchimento."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Largura Remoção Revestimento"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "A largura máxima das áreas do revestimento a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento superior/inferior nas superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Largura Remoção Revestimento Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "A largura máxima das áreas do revestimento superior a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento superior nas superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Largura Remoção Revestimento Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "A largura máxima das áreas do revestimento inferior a serem removidas. Todas as áreas de revestimento mais pequenas do que este valor irão desaparecer. Isto pode ajudar a limitar a quantidade de tempo e material gastos na impressão do revestimento inferior nas superfícies inclinadas do modelo."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Distância Expansão Revestimento"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "A distância da expansão dos revestimentos para dentro do enchimento. Valores mais elevados melhoram tanto a fixação do revestimento ao padrão geométrico de enchimento, assim como a aderência ao revestimento das paredes de camadas adjacentes. Valores mais baixos reduzem a quantidade de material utilizado."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Distância Expansão Revestimento Superior"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "A distância da expansão dos revestimentos superiores para dentro do enchimento. Valores mais elevados melhoram, tanto, a fixação do revestimento ao padrão geométrico do enchimento, assim como a aderência ao revestimento das paredes da camada seguinte. Valores mais baixos reduzem a quantidade de material utilizado."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Expansão Revestimento Inferior"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "A distância da expansão dos revestimentos inferiores para dentro do enchimento. Valores mais elevados melhoram, tanto, a fixação do revestimento ao padrão geométrico de enchimento, assim como a aderência do revestimento às paredes da camada anterior. Valores mais baixos reduzem a quantidade de material utilizado."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Ângulo Revestimento para Expansão"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "O revestimento superior/inferior não será expandido, quando as superfícies superiores e/ou inferiores do objeto tiverem um ângulo maior que este valor. Isto evita a expansão das pequenas áreas de revestimento que são criadas quando a superfície do modelo tem uma inclinação quase vertical. Um ângulo de 0° é horizontal e um ângulo de 90° é vertical."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Largura Mínima Revestimento para Expansão"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "As áreas de revestimento mais pequenas do que este valor não são expandidas. Isto evita a expansão das pequenas áreas de revestimento que são criadas quando a superfície do modelo apresenta uma inclinação quase vertical."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Espessura do Suporte da Aresta de Revestimento"
@@ -2134,8 +2164,7 @@ msgstr "Temperatura da base de construção da camada inicial"
 #: fdmprinter.def.json
 msgctxt "material_bed_temperature_layer_0 description"
 msgid "The temperature used for the heated build plate at the first layer. If this is 0, the build plate is left unheated during the first layer."
-msgstr "A temperatura utilizada para a base de construção aquecida na primeira camada. Se este valor for 0, a temperatura da base de construção não é aquecida"
-" durante a primeira camada."
+msgstr "A temperatura utilizada para a base de construção aquecida na primeira camada. Se este valor for 0, a temperatura da base de construção não é aquecida durante a primeira camada."
 
 #: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
@@ -2638,8 +2667,8 @@ msgstr "Velocidade Camada Inicial"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "A velocidade da camada inicial. É recomendado um valor inferior para melhorar a aderência à base de construção."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5225,10 +5254,8 @@ msgstr "Classificação de processamento de malha"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Determina a prioridade desta malha quando se consideram várias malhas de enchimento em sobreposição. As áreas com sobreposição de várias malhas de enchimento"
-" vão assumir as definições da malha com a classificação mais baixa. Uma malha de enchimento com uma ordem superior irá modificar o enchimento das malhas"
-" de enchimento com uma ordem inferior e as malhas normais."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5590,6 +5617,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "O ângulo máximo das saliências após se terem tornado imprimíveis. Com um valor de 0°, todas as saliências são substituídas por um modelo ligado à base de construção e, com um valor de 90°, o modelo não será alterado de forma alguma."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Ativar desaceleração"
@@ -6530,6 +6567,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Matriz de transformação a ser aplicada ao modelo quando abrir o ficheiro."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Aplicar o desvio do extrusor ao sistema de coordenadas."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Invólucro"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "O revestimento superior/inferior não será expandido, quando as superfícies superiores e/ou inferiores do objeto tiverem um ângulo maior que este valor. Isto evita a expansão das pequenas áreas de revestimento que são criadas quando a superfície do modelo tem uma inclinação quase vertical. Um ângulo de 0° é horizontal e um ângulo de 90° é vertical."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "A velocidade da camada inicial. É recomendado um valor inferior para melhorar a aderência à base de construção."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Determina a prioridade desta malha quando se consideram várias malhas de enchimento em sobreposição. As áreas com sobreposição de várias malhas de enchimento vão assumir as definições da malha com a classificação mais baixa. Uma malha de enchimento com uma ordem superior irá modificar o enchimento das malhas de enchimento com uma ordem inferior e as malhas normais."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "A temperatura utilizada na base de construção aquecida. Se este valor for 0, a temperatura da base não será alterada."
diff --git a/resources/i18n/ru_RU/cura.po b/resources/i18n/ru_RU/cura.po
index 8ae27be847..8a23321388 100644
--- a/resources/i18n/ru_RU/cura.po
+++ b/resources/i18n/ru_RU/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Russian <info@lionbridge.com>, Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "X-Generator: Poedit 2.2.4\n"
 "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Неизвестно"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Загрузка принтеров..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Перечисленные ниже принтеры невозможно подключить, поскольку они входят в состав группы"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Настройка параметров..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Доступные сетевые принтеры"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Инициализация активной машины..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Не переопределен"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Инициализация диспетчера машин..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Действительно удалить {0}? Это действие невозможно будет отменить!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Инициализация объема печати..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Настройка сцены..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Визуальный"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Загрузка интерфейса..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Визуальный профиль предназначен для печати визуальных прототипов и моделей, для которых требуется высокое качество поверхности и внешнего вида."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Инициализация ядра..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f мм"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Инженерный профиль предназначен для печати функциональных прототипов и готовых деталей, для которых требуется высокая точность и малые допуски."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Только один G-code файла может быть загружен в момент времени. Пропускаю импортирование {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Черновой"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Внимание"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Черновой профиль предназначен для печати начальных прототипов и проверки концепции, где приоритетом является скорость печати."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Невозможно открыть любой другой файл, если G-code файл уже загружен. Пропускаю импортирование {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Ошибка"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Действительно удалить {0}? Это действие невозможно будет отменить!"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Собственный материал"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Своё"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Неизвестно"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Собственные профили"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Все поддерживаемые типы ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Все файлы (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Вход не выполнен"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Поиск места для новых объектов"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Поиск места"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Визуальный"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Невозможно разместить все объекты внутри печатаемого объёма"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Визуальный профиль предназначен для печати визуальных прототипов и моделей, для которых требуется высокое качество поверхности и внешнего вида."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Не могу найти место"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Не удалось создать архив из каталога с данными пользователя: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Инженерный профиль предназначен для печати функциональных прототипов и готовых деталей, для которых требуется высокая точность и малые допуски."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Резервное копирование"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Черновой"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Попытка восстановить резервную копию Cura при отсутствии необходимых данных или метаданных."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Черновой профиль предназначен для печати начальных прототипов и проверки концепции, где приоритетом является скорость печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Выполнена попытка восстановить резервную копию Cura с более поздней версией, чем текущая."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Перечисленные ниже принтеры невозможно подключить, поскольку они входят в состав группы"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Высота печатаемого объёма была уменьшена до значения параметра \"Последовательность печати\", чтобы предотвратить касание портала за напечатанные детали."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Доступные сетевые принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Объём печати"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Не переопределен"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Не удалось запустить Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>Отправьте нам этот отчет о сбое для устранения проблемы.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Отправить отчет о сбое в Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Показать подробный отчет о сбое"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Показать конфигурационный каталог"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Резервное копирование и сброс конфигурации"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Отчёт о сбое"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1111 +249,767 @@ msgstr ""
 "            <p>Нажмите кнопку «Отправить отчет», чтобы автоматически опубликовать отчет об ошибке на наших серверах</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Информация о системе"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Неизвестно"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Версия Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Язык Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Язык ОС"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Платформа"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Версия Qt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "Версия PyQt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Еще не инициализировано<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>Версия OpenGL: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>Поставщик OpenGL: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>Средство визуализации OpenGL: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Обратное отслеживание ошибки"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Журналы"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Отправить отчёт"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Загрузка принтеров..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Настройка параметров..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Инициализация активной машины..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Инициализация диспетчера машин..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Инициализация объема печати..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Настройка сцены..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Загрузка интерфейса..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Инициализация ядра..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f мм"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Только один G-code файла может быть загружен в момент времени. Пропускаю импортирование {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Внимание"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Невозможно открыть любой другой файл, если G-code файл уже загружен. Пропускаю импортирование {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Ошибка"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Размножение и размещение объектов"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Размещение объектов"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Размещение объекта"
+msgid "Login failed"
+msgstr "Вход не выполнен"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Не удалось прочитать ответ."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Невозможно начать новый вход в систему. Проверьте, возможно другой сеанс еще не завершен."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Нет связи с сервером учетных записей Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "Указано неверное состояние."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Дайте необходимые разрешения при авторизации в этом приложении."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Возникла непредвиденная ошибка при попытке входа в систему. Повторите попытку."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Невозможно начать новый вход в систему. Проверьте, возможно другой сеанс еще не завершен."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Нет связи с сервером учетных записей Ultimaker."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Файл уже существует"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Файл <filename>{0}</filename> уже существует. Вы уверены, что желаете перезаписать его?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Неправильный URL-адрес файла:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Сопло"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Настройки изменены в соответствии с текущей доступностью экструдеров:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Настройки обновлены"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Экструдер (-ы) отключен (-ы)"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Невозможно экспортировать профиль в <filename>{0}</filename>: Плагин записи уведомил об ошибке."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Экспортирование профиля в <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Экспорт успешно завершен"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Не удалось импортировать профиль из <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Невозможно импортировать профиль из <filename>{0}</filename>, пока не добавлен принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Отсутствует собственный профиль для импорта в файл <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Данный профиль <filename>{0}</filename> содержит неверные данные, поэтому его невозможно импортировать."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Не удалось импортировать профиль из <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Профиль {0} успешно импортирован."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "В файле {0} нет подходящих профилей."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Профиль {0} имеет неизвестный тип файла или повреждён."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Собственный профиль"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "У профайла отсутствует тип качества."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Общий стек отсутствует."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Невозможно добавить профиль."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Тип качества \"{0}\" несовместим с текущим определением активной машины \"{1}\"."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Внимание! Профиль не отображается, так как его тип качества \"{0}\" недоступен для текущей конфигурации. Выберите комбинацию материала и сопла, которым подходит этот тип качества."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Не поддерживается"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Сопло"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Настройки изменены в соответствии с текущей доступностью экструдеров:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Поиск места для новых объектов"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Настройки обновлены"
+msgid "Finding Location"
+msgstr "Поиск места"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Невозможно разместить все объекты внутри печатаемого объёма"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Экструдер (-ы) отключен (-ы)"
+msgid "Can't Find Location"
+msgstr "Не могу найти место"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Группа #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Добавить"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Завершить"
+msgid "Close"
+msgstr "Закрыть"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Отмена"
+msgid "Next"
+msgstr "Следующий"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Группа #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Завершить"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Внешняя стенка"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Внутренние стенки"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Покрытие"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Заполнение"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Заполнение поддержек"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Связующий слой поддержек"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Поддержки"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Юбка"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Черновая башня"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Перемещение"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Откаты"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Другое"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Следующий"
+msgid "Add"
+msgstr "Добавить"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Закрыть"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "Помощник по 3D-моделям"
+msgid "Cancel"
+msgstr "Отмена"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Одна или несколько 3D-моделей могут не напечататься оптимальным образом из-за размера модели и конфигурации материала:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Узнайте, как обеспечить максимально возможное качество и высокую надежность печати.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ознакомиться с руководством по качеству печати</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Файл проекта <filename>{0}</filename> содержит неизвестный тип принтера <message>{1}</message>. Не удалось импортировать принтер. Вместо этого будут импортированы модели."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Открыть файл проекта"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Файл проекта <filename>{0}</filename> внезапно стал недоступен: <message>{1}.</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Невозможно открыть файл проекта"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Файл проекта <filename>{0}</filename> создан с использованием профилей, несовместимых с данной версией Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Рекомендованная"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Своя"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "Файл 3MF"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "Подключаемый модуль для записи 3MF поврежден."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Права на запись рабочей среды отсутствуют."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Операционная система не позволяет сохранять файл проекта в этом каталоге или с этим именем файла."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Ошибка в ходе записи файла 3MF."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF файл"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "3MF файл проекта Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "Файл AMF"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Высота печатаемого объёма была уменьшена до значения параметра \"Последовательность печати\", чтобы предотвратить касание портала за напечатанные детали."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Резервные копии"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "При заливке вашей резервной копии возникла ошибка."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Создание резервной копии..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "При создании резервной копии возникла ошибка."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Выполняется заливка вашей резервной копии..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Заливка вашей резервной копии завершена."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Размер файла резервной копии превышает максимально допустимый."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "При попытке восстановления данных из резервной копии возникла ошибка."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Управление резервными копиями"
+msgid "Build Volume"
+msgstr "Объём печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Невозможно нарезать модель, используя текущий материал, так как он несовместим с выбранной машиной или конфигурацией."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Не удалось создать архив из каталога с данными пользователя: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Невозможно нарезать"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Не могу выполнить слайсинг на текущих настройках. Проверьте следующие настройки: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Не удалось выполнить слайсинг из-за настроек модели. Следующие настройки ошибочны для одной или нескольких моделей: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Слайсинг невозможен, так как черновая башня или её позиция неверные."
+msgid "Backup"
+msgstr "Резервное копирование"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Невозможно разделить на слои из-за наличия объектов, связанных с отключенным экструдером %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Попытка восстановить резервную копию Cura при отсутствии необходимых данных или метаданных."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Проверьте настройки и убедитесь в том, что ваши модели:\n"
-"- соответствуют допустимой области печати\n"
-"- назначены активированному экструдеру\n"
-"- не заданы как объекты-модификаторы"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Выполнена попытка восстановить резервную копию Cura с более поздней версией, чем текущая."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Обработка слоёв"
+msgid "Multiplying and placing objects"
+msgstr "Размножение и размещение объектов"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Информация"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Профиль Cura"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Не могу получить информацию об обновлениях."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Для {machine_name} доступны новые функции или исправления! Если у вас не установлена самая последняя версия прошивки принтера, рекомендуем обновить ее до версии {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Доступна новая прошивка %s"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Порядок обновления"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Обновить прошивку"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Сжатый файл с G-кодом"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "Средство записи G-кода с расширением GZ (GCodeGzWriter) не поддерживает текстовый режим."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "Файл G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "Обработка G-code"
+msgid "Placing Objects"
+msgstr "Размещение объектов"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Параметры G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Перед отправкой G-code на принтер удостоверьтесь в его соответствии вашему принтеру и его настройкам. Возможны неточности в G-code."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "Файл G"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "Средство записи G-кода (GCodeWriter) не поддерживает нетекстовый режим."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Подготовьте G-код перед экспортом."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG изображение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG изображение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG изображение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP изображение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF изображение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Профили Cura 15.04"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Параметры принтера"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Монитор"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Параметры модели"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Правка параметров модели"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Пост-обработка"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "Изменить G-код"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Подготовка"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Предварительный просмотр"
+msgid "Placing Object"
+msgstr "Размещение объекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Сохранить на внешний носитель"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Сохранить на внешний носитель {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Ни один из форматов файлов не доступен для записи!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Сохранение на внешний носитель <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Сохранение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Не могу записать <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Не могу найти имя файла при записи в {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Невозможно сохранить на внешний носитель {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Сохранено на внешний носитель {0} как {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Файл сохранён"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Извлечь"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Извлекает внешний носитель {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Извлечено {0}. Вы можете теперь безопасно извлечь носитель."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Безопасное извлечение устройства"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Невозможно извлечь {0}. Другая программа может использовать это устройство."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Внешний носитель"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "При печати через кабель Cura отображает слои неточно."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Вид моделирования"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Ничего не отображается, поскольку сначала нужно выполнить нарезку на слои."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Нет слоев для отображения"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Больше не показывать это сообщение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Просмотр слоёв"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Модель не размножена. Выделены области с отсутствующими или лишними поверхностями."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Ошибки модели"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Просмотр модели"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Блокировщик поддержки"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Создание объема без печати элементов поддержки."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Хотите синхронизировать пакеты материалов и программного обеспечения со своей учетной записью?"
+msgid "AMF File"
+msgstr "Файл AMF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "В вашей учетной записи Ultimaker обнаружены изменения"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "Файл G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Синхронизация"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Обновить прошивку"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Синхронизация..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "Файл X3D"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Отклонить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Принимаю"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Лицензионное соглашение плагина"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Отклонить и удалить из учетной записи"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "Встраиваемые модули ({} шт.) не загружены"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Синхронизация..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "В вашей учетной записи Ultimaker обнаружены изменения"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Для активации изменений вам потребуется завершить работу программного обеспечения {} и перезапустить его."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "Встраиваемые модули ({} шт.) не загружены"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Хотите синхронизировать пакеты материалов и программного обеспечения со своей учетной записью?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Синхронизация"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Параметры модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Правка параметров модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Пост-обработка"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "Изменить G-код"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Невозможно нарезать модель, используя текущий материал, так как он несовместим с выбранной машиной или конфигурацией."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Пакет формата Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Невозможно нарезать"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Невозможно записать в файл UFP:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Не могу выполнить слайсинг на текущих настройках. Проверьте следующие настройки: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Выравнивание стола"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Не удалось выполнить слайсинг из-за настроек модели. Следующие настройки ошибочны для одной или нескольких моделей: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Выбор обновлений"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Слайсинг невозможен, так как черновая башня или её позиция неверные."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Печать через облако"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Невозможно разделить на слои из-за наличия объектов, связанных с отключенным экструдером %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Печать через облако"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Проверьте настройки и убедитесь в том, что ваши модели:\n"
+"- соответствуют допустимой области печати\n"
+"- назначены активированному экструдеру\n"
+"- не заданы как объекты-модификаторы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Подключено через облако"
+msgid "Processing Layers"
+msgstr "Обработка слоёв"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Неизвестный код ошибки при загрузке задания печати: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Информация"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "Печать через USB"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Печатать через USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Печатать через USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Подключено через USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Выполняется печать через USB, закрытие Cura остановит эту печать. Вы уверены?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Печать еще выполняется. Cura не может начать другую печать через USB, пока предыдущая печать не будет завершена."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Идет печать"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Профиль Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Подключиться через сеть"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
@@ -1348,13 +1017,13 @@ msgstr[0] "новый принтер обнаружен из учетной за
 msgstr[1] "новых принтера обнаружено из учетной записи Ultimaker"
 msgstr[2] "новых принтеров обнаружено из учетной записи Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Добавление принтера {name} ({model}) из вашей учетной записи"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1363,12 +1032,12 @@ msgstr[0] "... и еще {0} другой"
 msgstr[1] "... и еще {0} других"
 msgstr[2] "... и еще {0} других"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Принтеры, добавленные из Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
@@ -1376,7 +1045,7 @@ msgstr[0] "Подключение к облаку недоступно для п
 msgstr[1] "Подключение к облаку недоступно для некоторых принтеров"
 msgstr[2] "Подключение к облаку недоступно для некоторых принтеров"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
@@ -1384,52 +1053,52 @@ msgstr[0] "Это принтер не подключен Digital Factory:"
 msgstr[1] "Эти принтеры не подключены Digital Factory:"
 msgstr[2] "Эти принтеры не подключены Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Чтобы установить подключение, перейдите на сайт {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Сохранить конфигурации принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Удалить принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} будет удален до следующей синхронизации учетной записи."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Чтобы удалить {printer_name} без возможности восстановления, перейдите на сайт {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Действительно удалить {printer_name} временно?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Удалить принтеры?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1448,869 +1117,1011 @@ msgstr[2] ""
 "Вы удаляете {0} принтеров из Cura. Это действие невозможно будет отменить.\n"
 "Продолжить?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
 msgstr "Вы удаляете все принтеры из Cura. Это действие невозможно будет отменить.Продолжить?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Отправляйте и отслеживайте задания печати из любого места с помощью вашей учетной записи Ultimaker."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Печать через облако"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Подключение к Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Печать через облако"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Приступить"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Подключено через облако"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Неизвестный код ошибки при загрузке задания печати: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Вы пытаетесь подключиться к принтеру, на котором не работает Ultimaker Connect. Обновите прошивку принтера до последней версии."
+msgid "tomorrow"
+msgstr "завтра"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Обновите свой принтер"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "сегодня"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura обнаружены профили материалов, которые пока не установлены в главном принтере группы {0}."
+msgid "Sending Print Job"
+msgstr "Отправка задания печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Отправка материалов на принтер"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Загрузка задания печати в принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "Вы пытаетесь подключиться к {0}, но это не главный принтер группы. Откройте веб-страницу, чтобы настроить его в качестве главного принтера группы."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Не главный принтер группы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Настроить группу"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Отправляйте и отслеживайте задания печати из любого места с помощью вашей учетной записи Ultimaker."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Подключение к Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Приступить"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Дождитесь окончания отправки текущего задания."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Ошибка печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Облако не залило данные на принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Ошибка сети"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Отправка задания печати"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura обнаружены профили материалов, которые пока не установлены в главном принтере группы {0}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Загрузка задания печати в принтер."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Отправка материалов на принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "Очередь заданий печати заполнена. Принтер не может принять новое задание."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Очередь заполнена"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Задание печати успешно отправлено на принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Данные отправлены"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Вы пытаетесь подключиться к принтеру, на котором не работает Ultimaker Connect. Обновите прошивку принтера до последней версии."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Обновите свой принтер"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Печать через сеть"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Печать через сеть"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Подключен по сети"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Подключиться через сеть"
+msgid "Select upgrades"
+msgstr "Выбор обновлений"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "завтра"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Выравнивание стола"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "сегодня"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Рекомендованная"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "Печать через USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Своя"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Печатать через USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Файл проекта <filename>{0}</filename> содержит неизвестный тип принтера <message>{1}</message>. Не удалось импортировать принтер. Вместо этого будут импортированы модели."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Печатать через USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Открыть файл проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Подключено через USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Файл проекта <filename>{0}</filename> внезапно стал недоступен: <message>{1}.</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Выполняется печать через USB, закрытие Cura остановит эту печать. Вы уверены?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Невозможно открыть файл проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Печать еще выполняется. Cura не может начать другую печать через USB, пока предыдущая печать не будет завершена."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Идет печать"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Файл проекта <filename>{0}</filename> создан с использованием профилей, несовместимых с данной версией Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "Файл X3D"
+msgid "3MF File"
+msgstr "Файл 3MF"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Просмотр в рентгене"
+msgid "Compressed G-code File"
+msgstr "Сжатый файл с G-кодом"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "С этой печатью могут быть связаны некоторые проблемы. Щелкните для просмотра советов по регулировке."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "Средство записи G-кода с расширением GZ (GCodeGzWriter) не поддерживает текстовый режим."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Открытие проекта"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "Помощник по 3D-моделям"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Обновить существующий"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Одна или несколько 3D-моделей могут не напечататься оптимальным образом из-за размера модели и конфигурации материала:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Узнайте, как обеспечить максимально возможное качество и высокую надежность печати.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Ознакомиться с руководством по качеству печати</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Создать новый"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Не могу получить информацию об обновлениях."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Сводка - Проект Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Для {machine_name} доступны новые функции или исправления! Если у вас не установлена самая последняя версия прошивки принтера, рекомендуем обновить ее до версии {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Параметры принтера"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Доступна новая прошивка %s"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Как следует решать конфликт в принтере?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Порядок обновления"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Тип"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "Файл G"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Группа принтеров"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "Обработка G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Параметры профиля"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Параметры G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Перед отправкой G-code на принтер удостоверьтесь в его соответствии вашему принтеру и его настройкам. Возможны неточности в G-code."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Блокировщик поддержки"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Как следует решать конфликт в профиле?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Создание объема без печати элементов поддержки."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Название"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Вне профиля"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 перекрыт"
-msgstr[1] "%1 перекрыто"
-msgstr[2] "%1 перекрыто"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Производное от"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 перекрыто"
-msgstr[1] "%1, %2 перекрыто"
-msgstr[2] "%1, %2 перекрыто"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Параметры материала"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Пакет формата Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Как следует решать конфликт в материале?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Профили Cura 15.04"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Видимость параметров"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Подготовка"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Режим"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Монитор"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Видимые параметры:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Просмотр в рентгене"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 из %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Ошибка в ходе записи файла 3MF."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Загрузка проекта приведет к удалению всех моделей на рабочем столе."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF файл"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Открыть"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "3MF файл проекта Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Желаете большего?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "Подключаемый модуль для записи 3MF поврежден."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Создать резервную копию"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Права на запись рабочей среды отсутствуют."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Автоматическое резервное копирование"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Операционная система не позволяет сохранять файл проекта в этом каталоге или с этим именем файла."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Автоматически создавать резервную копию в день запуска Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Предварительный просмотр"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Восстановить"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Просмотр слоёв"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Удалить резервную копию"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "При печати через кабель Cura отображает слои неточно."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Вы уверены, что хотите удалить указанную резервную копию? Данное действие невозможно отменить."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Вид моделирования"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Восстановить резервную копию"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Ничего не отображается, поскольку сначала нужно выполнить нарезку на слои."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Вам потребуется перезапустить Cura, прежде чем данные будут восстановлены из резервной копии. Вы действительно хотите закрыть Cura прямо сейчас?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Нет слоев для отображения"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Версия Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Больше не показывать это сообщение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Принтеры"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Параметры принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Материалы"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Просмотр модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Профили"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Плагины"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Резервные копии Cura"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Мои резервные копии"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Невозможно записать в файл UFP:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "В данный момент у вас отсутствуют резервные копии. Для создания резервной копии нажмите кнопку «Создать резервную копию»."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "Средство записи G-кода (GCodeWriter) не поддерживает нетекстовый режим."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "На этапе предварительного просмотра отображается только 5 резервных копий. Для просмотра предыдущих резервных копий удалите одну копию."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Подготовьте G-код перед экспортом."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Резервное копирование и синхронизация ваших параметров Cura."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG изображение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Войти"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG изображение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG изображение"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP изображение"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF изображение"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "При попытке восстановления данных из резервной копии возникла ошибка."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Резервные копии"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "При заливке вашей резервной копии возникла ошибка."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Создание резервной копии..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "При создании резервной копии возникла ошибка."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Выполняется заливка вашей резервной копии..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Заливка вашей резервной копии завершена."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Размер файла резервной копии превышает максимально допустимый."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Управление резервными копиями"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Обновить прошивку"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Прошивка является программным обеспечением, которое работает на плате вашего 3D принтера. Прошивка управляет шаговыми моторами, регулирует температуру и, в конечном счёте, обеспечивает работу вашего принтера."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Поставляемая с новыми принтерами прошивка работоспособна, но обновления предоставляют больше возможностей и усовершенствований."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Автоматическое обновление прошивки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Залить собственную прошивку"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Невозможно обновить прошивку, так как нет подключения к принтеру."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Невозможно обновить прошивку, так как подключение к принтеру не поддерживает функцию обновления прошивки."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Выбрать собственную прошивку"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Обновление прошивки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Обновление прошивки."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Обновление прошивки завершено."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Обновление прошивки не удалось из-за неизвестной ошибки."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Обновление прошивки не удалось из-за ошибки связи."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Обновление прошивки не удалось из-за ошибки ввода-вывода."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Обновление прошивки не удалось из-за её отсутствия."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Преобразование изображения..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Магазин"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Максимальная дистанция каждого пикселя от \"Основания.\""
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Для установки пакета необходимо принять лицензию"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Высота (мм)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Изменения в вашей учетной записи"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Высота основания от стола в миллиметрах."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Отклонить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Основание (мм)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Следующий"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Ширина в миллиметрах на столе."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Будут добавлены следующие пакеты:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Ширина (мм)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Следующие пакеты невозможно установить из-за несовместимой версии Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Глубина в миллиметрах на столе"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Подтвердить удаление"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Глубина (мм)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Вы удаляете материалы и/или профили, которые все еще используются. Подтверждение приведет к сбросу указанных ниже материалов/профилей к их настройкам по умолчанию."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Для литофании темные пиксели должны соответствовать более толстым частям, чтобы сильнее задерживать проходящий свет. Для схем высот более светлые пиксели обозначают более высокий участок. Поэтому более светлые пиксели должны соответствовать более толстым местам в созданной 3D-модели."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Тёмные выше"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Профили"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Светлые выше"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Подтвердить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Для литофании предусмотрена простая логарифмическая модель светопроходимости. В картах высот значения пикселей линейно соответствуют высотам."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Не удалось подключиться к базе данных пакета Cura. Проверьте свое подключение."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Линейный"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Вклад в развитие сообщества"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Светопроходимость"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Плагины сообщества"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Процент света, проникающего в отпечаток толщиной 1 миллиметр. Если уменьшить это значение, контрастность в темных областях изображения увеличится, а в светлых — уменьшится."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Универсальные материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Проходимость через 1 мм (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Версия"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Величина сглаживания для применения к изображению."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Последнее обновление"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Сглаживание"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Брэнд"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Загрузки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Принтер"
+msgid "Installed plugins"
+msgstr "Установленные встраиваемые модули"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Параметры сопла"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Встраиваемые модули не установлены."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Диаметр сопла"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Установленные материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "мм"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Материалы не установлены."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Диаметр совместимого материала"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Связанные встраиваемые модули"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Смещение сопла по оси X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Связанные материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Смещение сопла по оси Y"
+msgid "Website"
+msgstr "Веб-сайт"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Номер охлаждающего вентилятора"
+msgid "Email"
+msgstr "Электронная почта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Стартовый G-код экструдера"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Войдите, чтобы получить проверенные встраиваемые модули и материалы для Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Завершающий G-код экструдера"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Войти"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Параметры принтера"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Выборка пакетов..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Ширина)"
+msgid "Compatibility"
+msgstr "Совместимость"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Глубина)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Высота)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Рабочий стол"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Форма стола"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Поддержки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Начало координат в центре"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Качество"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Нагреваемый стол"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Таблица технических характеристик"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Подогреваемый объем печати"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Паспорт безопасности"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Вариант G-кода"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Инструкции по печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Параметры головы"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Веб-сайт"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X минимум"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Плагины"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y минимум"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X максимум"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Установлено"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y максимум"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Перейти в интернет-магазин"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Высота портала"
+msgid "Will install upon restarting"
+msgstr "Установка выполнится при перезагрузке"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Количество экструдеров"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Обновить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Стартовый G-код"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Обновление"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Завершающий G-код"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Обновлено"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Проверьте наличие подключения к принтеру:\n"
-"- Убедитесь, что принтер включен.\n"
-"- Убедитесь, что принтер подключен к сети.\n"
-"- Убедитесь, что вы вошли в систему (это необходимо для поиска принтеров, подключенных к облаку)."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "Для выполнения обновления необходимо <a href='%1'>войти</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Переход на более раннюю версию"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Удалить"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Установлено"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "Для выполнения установки или обновления необходимо <a href='%1'>войти</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Приобретение катушек с материалом</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Премиум"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Поиск материалов"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Подключите принтер к сети."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Вам потребуется перезапустить Cura для активации изменений в пакетах."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Просмотр руководств пользователей онлайн"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Выйти из %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Назад"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Установить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Тип объекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Нормальная модель"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Печать в качестве поддержки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Изменить настройки для перекрытий"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Не поддерживать перекрытия"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Заполнение объекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Ограничивающий объект"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Выберите параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Выберите параметр для изменения этой модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Фильтр..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Показать всё"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Плагин пост-обработки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Скрипты пост-обработки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Добавить скрипт"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Измените активные скрипты пост-обработки."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
@@ -2318,1298 +2129,1489 @@ msgstr[0] "Активны следующие скрипты:"
 msgstr[1] "Активны следующие скрипты:"
 msgstr[2] "Активны следующие скрипты:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Цветовая схема"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Цвет материала"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Тип линии"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Скорость"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Толщина слоя"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Режим совместимости"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Перемещения"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Помощники"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Shell"
-msgstr "Ограждение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Заполнение"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Показать только верхние слои"
+msgid "Queued"
+msgstr "Запланировано"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Показать 5 детализированных слоёв сверху"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Управление через браузер"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Дно / крышка"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "В очереди нет заданий печати. Выполните нарезку и отправьте задание."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Внутренняя стенка"
+msgid "Print jobs"
+msgstr "Задания печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "мин."
+msgid "Total print time"
+msgstr "Общее время печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "макс."
+msgid "Waiting for"
+msgstr "Ожидание"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Дополнительная информация о сборе анонимных данных"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем. Ниже приведен пример всех передаваемых данных:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Не хочу отправлять анонимные данные"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Разрешить отправку анонимных данных"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Назад"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Совместимость"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Принтер"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Рабочий стол"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Поддержки"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Качество"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Таблица технических характеристик"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Паспорт безопасности"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Инструкции по печати"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Веб-сайт"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Установлено"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "Для выполнения установки или обновления необходимо <a href='%1'>войти</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Приобретение катушек с материалом</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Обновить"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Обновление"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Обновлено"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Премиум"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Перейти в интернет-магазин"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Поиск материалов"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Вам потребуется перезапустить Cura для активации изменений в пакетах."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Выйти из %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Плагины"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Материалы"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Установлено"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Установка выполнится при перезагрузке"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Для выполнения обновления необходимо <a href='%1'>войти</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Переход на более раннюю версию"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Удалить"
+msgid "Configuration Changes"
+msgstr "Изменения конфигурации"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Установить"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Изменения в вашей учетной записи"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Отклонить"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Следующий"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Будут добавлены следующие пакеты:"
+msgid "Override"
+msgstr "Переопределить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Следующие пакеты невозможно установить из-за несовместимой версии Cura:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Подтвердить удаление"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Вы удаляете материалы и/или профили, которые все еще используются. Подтверждение приведет к сбросу указанных ниже материалов/профилей к их настройкам по умолчанию."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Материалы"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Профили"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Подтвердить"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Для назначенного принтера %1 требуется следующее изменение конфигурации:"
+msgstr[1] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
+msgstr[2] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Для установки пакета необходимо принять лицензию"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Принтер %1 назначен, однако в задании указана неизвестная конфигурация материала."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Веб-сайт"
+msgid "Change material %1 from %2 to %3."
+msgstr "Изменить материал %1 с %2 на %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "Электронная почта"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Загрузите %3 как материал %1 (переопределение этого действия невозможно)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Версия"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Изменить экструдер %1 с %2 на %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Последнее обновление"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Заменить рабочий стол на %1 (переопределение этого действия невозможно)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Брэнд"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "При переопределении к имеющейся конфигурации принтера будут применены указанные настройки. Это может привести к ошибке печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Загрузки"
+msgid "Glass"
+msgstr "Стекло"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Вклад в развитие сообщества"
+msgid "Aluminum"
+msgstr "Алюминий"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Плагины сообщества"
+msgid "Unavailable printer"
+msgstr "Недоступный принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Универсальные материалы"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Не удалось подключиться к базе данных пакета Cura. Проверьте свое подключение."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Установленные встраиваемые модули"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Встраиваемые модули не установлены."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Установленные материалы"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Материалы не установлены."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Связанные встраиваемые модули"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Связанные материалы"
+msgid "First available"
+msgstr "Первое доступное"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Выборка пакетов..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Войдите, чтобы получить проверенные встраиваемые модули и материалы для Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Магазин"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Выравнивание стола"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Сейчас вы можете отрегулировать ваш стол, чтобы быть уверенным в качестве последующей печати. При нажатии на кнопку «Перейти к следующей позиции» сопло перейдёт на другую позиции, которую можно будет отрегулировать."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Для каждой позиции, вставьте кусок бумаги под сопло и отрегулируйте высоту стола. Когда кончик сопла немного прижимает бумагу к столу, значит вы выставили правильную высоту стола."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Начало выравнивания стола"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Перейти к следующей позиции"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Пожалуйста, укажите любые изменения, внесённые в Ultimaker Original"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Нагреваемый стол (официальный набор или самодельный)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Для удаленного управления очередью необходимо обновить программное обеспечение принтера."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Подключение к сетевому принтеру"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Для печати непосредственно на принтере через сеть необходимо подключить принтер к сети с помощью сетевого кабеля или подключить его к сети Wi-Fi. Если вы не подключили Cura к принтеру, вы можете использовать USB-накопитель для переноса файлов G-Code на принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Выберите свой принтер из приведенного ниже списка:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Правка"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Удалить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Обновить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Если ваш принтер отсутствует в списке, обратитесь к <a href='%1'>руководству по решению проблем с сетевой печатью</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Тип"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Версия прошивки"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Адрес"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Данный принтер не настроен для управления группой принтеров."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Данный принтер управляет группой из %1 принтера (-ов)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Принтер по этому адресу ещё не отвечал."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Подключить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Недействительный IP-адрес"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Введите действительный IP-адрес."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Адрес принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Введите IP-адрес принтера в сети."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Изменения конфигурации"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Переопределить"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Для назначенного принтера %1 требуется следующее изменение конфигурации:"
-msgstr[1] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
-msgstr[2] "Для назначенного принтера %1 требуются следующие изменения конфигурации:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Принтер %1 назначен, однако в задании указана неизвестная конфигурация материала."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Изменить материал %1 с %2 на %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Загрузите %3 как материал %1 (переопределение этого действия невозможно)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Изменить экструдер %1 с %2 на %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Заменить рабочий стол на %1 (переопределение этого действия невозможно)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "При переопределении к имеющейся конфигурации принтера будут применены указанные настройки. Это может привести к ошибке печати."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Печать через сеть"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Стекло"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Печать"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Алюминий"
+msgid "Printer selection"
+msgstr "Выбор принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Переместить в начало"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Удалить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Продолжить"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Приостановка..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Возобновляется..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Пауза"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Прерывается..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Прервать"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Вы уверены, что хотите переместить %1 в начало очереди?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Переместить задание печати в начало очереди"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Вы уверены, что хотите удалить %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Удалить задание печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Вы уверены, что хотите прервать %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Прервать печать"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Прервано"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Завершено"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Подготовка..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Прерывается..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Приостановка..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Приостановлено"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Возобновляется..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Необходимое действие"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Завершение %1 в %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Управление принтером"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Для удаленного управления очередью необходимо обновить программное обеспечение принтера."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Загрузка..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Недоступен"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Недостижимо"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Простой"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Печать"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Без имени"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Анонимн"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Необходимо внести изменения конфигурации"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Подробности"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Недоступный принтер"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Пожалуйста, укажите любые изменения, внесённые в Ultimaker Original"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Первое доступное"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Нагреваемый стол (официальный набор или самодельный)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Прервано"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Выравнивание стола"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Завершено"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Сейчас вы можете отрегулировать ваш стол, чтобы быть уверенным в качестве последующей печати. При нажатии на кнопку «Перейти к следующей позиции» сопло перейдёт на другую позиции, которую можно будет отрегулировать."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Подготовка..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Для каждой позиции, вставьте кусок бумаги под сопло и отрегулируйте высоту стола. Когда кончик сопла немного прижимает бумагу к столу, значит вы выставили правильную высоту стола."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Прерывается..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Начало выравнивания стола"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Приостановка..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Перейти к следующей позиции"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Приостановлено"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Открытие проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Возобновляется..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Обновить существующий"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Необходимое действие"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Создать новый"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Завершение %1 в %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Сводка - Проект Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Параметры принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Как следует решать конфликт в принтере?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Тип"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Группа принтеров"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Параметры профиля"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Как следует решать конфликт в профиле?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Название"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Вне профиля"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 перекрыт"
+msgstr[1] "%1 перекрыто"
+msgstr[2] "%1 перекрыто"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Производное от"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 перекрыто"
+msgstr[1] "%1, %2 перекрыто"
+msgstr[2] "%1, %2 перекрыто"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Параметры материала"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Как следует решать конфликт в материале?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Видимость параметров"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Режим"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Видимые параметры:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 из %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Загрузка проекта приведет к удалению всех моделей на рабочем столе."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Открыть"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "С этой печатью могут быть связаны некоторые проблемы. Щелкните для просмотра советов по регулировке."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Проверьте наличие подключения к принтеру:\n"
+"- Убедитесь, что принтер включен.\n"
+"- Убедитесь, что принтер подключен к сети.\n"
+"- Убедитесь, что вы вошли в систему (это необходимо для поиска принтеров, подключенных к облаку)."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Подключите принтер к сети."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Просмотр руководств пользователей онлайн"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Дополнительная информация о сборе анонимных данных"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем. Ниже приведен пример всех передаваемых данных:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Не хочу отправлять анонимные данные"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Разрешить отправку анонимных данных"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Запланировано"
+msgid "Color scheme"
+msgstr "Цветовая схема"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Управление через браузер"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Цвет материала"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Тип линии"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Скорость"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "В очереди нет заданий печати. Выполните нарезку и отправьте задание."
+msgid "Compatibility Mode"
+msgstr "Режим совместимости"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Задания печати"
+msgid "Travels"
+msgstr "Перемещения"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Общее время печати"
+msgid "Helpers"
+msgstr "Помощники"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Ожидание"
+msgid "Shell"
+msgstr "Ограждение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Печать через сеть"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Заполнение"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Печать"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Выбор принтера"
+msgid "Only Show Top Layers"
+msgstr "Показать только верхние слои"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Войти"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Показать 5 детализированных слоёв сверху"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Ваш ключ к дистанционной 3D-печати"
+msgid "Top / Bottom"
+msgstr "Дно / крышка"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Новые профили печати и подключаемые модули позволяют вам печатать именно то, что вы хотите\n"
-"- Функция синхронизации настроек и их загрузки из любого места расширяет ваши возможности\n"
-"- Удаленная работа на принтерах Ultimaker обеспечивает повышение эффективности ваших процессов"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Внутренняя стенка"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Создать учетную запись"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "мин."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Проверка..."
+msgid "max"
+msgstr "макс."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Параметры сопла"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Учетная запись синхронизирована"
+msgid "Nozzle size"
+msgstr "Диаметр сопла"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Что-то пошло не так..."
+msgid "mm"
+msgstr "мм"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Установить ожидающие обновления"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Диаметр совместимого материала"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Проверить наличие обновлений учетной записи"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Смещение сопла по оси X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Последнее обновление: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Смещение сопла по оси Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Учетная запись Ultimaker"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Номер охлаждающего вентилятора"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Выйти"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Стартовый G-код экструдера"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Завершающий G-код экструдера"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Принтер"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Параметры принтера"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Оценка времени недоступна"
+msgid "X (Width)"
+msgstr "X (Ширина)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Оценка расходов недоступна"
+msgid "Y (Depth)"
+msgstr "Y (Глубина)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Предварительный просмотр"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Высота)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Оценка времени"
+msgid "Build plate shape"
+msgstr "Форма стола"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Оценка материала"
+msgid "Origin at center"
+msgstr "Начало координат в центре"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 м"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Нагреваемый стол"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 г"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Подогреваемый объем печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Нарезка на слои..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Вариант G-кода"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Невозможно нарезать"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Параметры головы"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X минимум"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y минимум"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X максимум"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y максимум"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Высота портала"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Количество экструдеров"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Стартовый G-код"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Завершающий G-код"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Преобразование изображения..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Максимальная дистанция каждого пикселя от \"Основания.\""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Высота (мм)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Высота основания от стола в миллиметрах."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Основание (мм)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Ширина в миллиметрах на столе."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Ширина (мм)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Глубина в миллиметрах на столе"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Глубина (мм)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Для литофании темные пиксели должны соответствовать более толстым частям, чтобы сильнее задерживать проходящий свет. Для схем высот более светлые пиксели обозначают более высокий участок. Поэтому более светлые пиксели должны соответствовать более толстым местам в созданной 3D-модели."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Тёмные выше"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Светлые выше"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Для литофании предусмотрена простая логарифмическая модель светопроходимости. В картах высот значения пикселей линейно соответствуют высотам."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Линейный"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Светопроходимость"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Процент света, проникающего в отпечаток толщиной 1 миллиметр. Если уменьшить это значение, контрастность в темных областях изображения увеличится, а в светлых — уменьшится."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Проходимость через 1 мм (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Величина сглаживания для применения к изображению."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Сглаживание"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Мои резервные копии"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "В данный момент у вас отсутствуют резервные копии. Для создания резервной копии нажмите кнопку «Создать резервную копию»."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "На этапе предварительного просмотра отображается только 5 резервных копий. Для просмотра предыдущих резервных копий удалите одну копию."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Резервное копирование и синхронизация ваших параметров Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Обработка"
+msgid "Want more?"
+msgstr "Желаете большего?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Нарезка на слои"
+msgid "Backup Now"
+msgstr "Создать резервную копию"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Запустить нарезку на слои"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Автоматическое резервное копирование"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Автоматически создавать резервную копию в день запуска Cura."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Версия Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Принтеры"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Материалы"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Профили"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Плагины"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Отмена"
+msgid "Restore"
+msgstr "Восстановить"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Показать онлайн-руководство по решению проблем"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Удалить резервную копию"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Полный экран"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Вы уверены, что хотите удалить указанную резервную копию? Данное действие невозможно отменить."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Выйти из полноэкранного режима"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Восстановить резервную копию"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "Отмена"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Вам потребуется перезапустить Cura, прежде чем данные будут восстановлены из резервной копии. Вы действительно хотите закрыть Cura прямо сейчас?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "Возврат"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Резервные копии Cura"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Материал"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Избранные"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Универсальные"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "Файл"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Сохранить проект..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Экспорт..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "Выход"
+msgid "Export Selection..."
+msgstr "Экспорт выбранного..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "Трехмерный вид"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Открыть недавние"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Выберите конфигурации"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Конфигурации"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Конфигурации"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Свое"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Принтер"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Включено"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Материал"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Использовать клей для лучшего прилипания с этой комбинацией материалов."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Данная конфигурация недоступна, поскольку %1 не распознан. Посетите %2 и загрузите подходящий профиль материала."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Магазин"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Загрузка доступных конфигураций из принтера..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Конфигурации недоступны, поскольку принтер отключен."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Вид"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Вид спереди"
+msgid "&Camera position"
+msgstr "Положение камеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Вид сверху"
+msgid "Camera view"
+msgstr "Вид камеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Вид слева"
+msgid "Perspective"
+msgstr "Перспективная"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Вид справа"
+msgid "Orthographic"
+msgstr "Ортографическая"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Настроить Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "Рабочий стол"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "Добавить принтер..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Подключенные к сети принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Управление принтерами..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Локальные принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Управление материалами..."
+msgid "Visible Settings"
+msgstr "Видимые параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Добавить больше материалов из Магазина"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "Обновить профиль текущими параметрами"
+msgid "Collapse All Categories"
+msgstr "Свернуть все категории"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "Сбросить текущие параметры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Управление видимостью настроек..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "Создать профиль из текущих параметров..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Управление профилями..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "Принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Показать онлайн документацию"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "Материал"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Отправить отчёт об ошибке"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Установить как активный экструдер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Что нового"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Включить экструдер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "О Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Отключить экструдер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Удалить выбранную модель"
-msgstr[1] "Удалить выбранные модели"
-msgstr[2] "Удалить выбранные модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Центрировать выбранную модель"
-msgstr[1] "Центрировать выбранные модели"
-msgstr[2] "Центрировать выбранные модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Печать выбранной модели:"
+msgstr[1] "Печать выбранных моделей:"
+msgstr[2] "Печать выбранных моделей:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Размножить выбранную модель"
 msgstr[1] "Размножить выбранные модели"
 msgstr[2] "Размножить выбранные модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Удалить модель"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Количество копий"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Поместить модель по центру"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Сгруппировать модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Собственные профили"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Разгруппировать модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Сбросить текущие параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Объединить модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Профиль"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "Дублировать модель..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Значения некоторых параметров отличаются от значений профиля.\n"
+"\n"
+"Нажмите для открытия менеджера профилей."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Выбрать все модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Вкл"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Очистить стол"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Выкл"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Перезагрузить все модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Экспериментальное"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Выровнять все модели по всем рабочим столам"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Рекомендован"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Выровнять все модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Свое"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Выровнять выбранные"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Параметры печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Сбросить позиции всех моделей"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Настройка печати отключена. Невозможно изменить файл с G-кодом."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Сбросить преобразования всех моделей"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Постепенное заполнение"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Открыть файл(ы)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Постепенное заполнение будет постепенно увеличивать объём заполнения по направлению вверх."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "Новый проект..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Профили"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Показать конфигурационный каталог"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "В некоторые настройки профиля были внесены изменения. Если их необходимо изменить, перейдите в пользовательский режим."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Видимость параметров..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Поддержки"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Магазин"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Генерация структур для поддержки нависающих частей модели. Без этих структур такие части будут складываться во время печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Этот пакет будет установлен после перезапуска."
+msgid "Adhesion"
+msgstr "Прилипание"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Общее"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Разрешает печать каймы или подложки. Это добавляет плоскую область вокруг или под вашим объектом, которую легко удалить после печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Параметры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Нет %1 профиля для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
+msgstr[1] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
+msgstr[2] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Принтеры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Профили"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Идёт печать"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "Закрытие %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Имя задачи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Вы уверены, что хотите выйти из %1?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Время печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Осталось примерно"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Открыть файл(ы)"
+msgid "Discard or Keep changes"
+msgstr "Сбросить или сохранить изменения"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Установить пакет"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Вы изменили некоторые настройки профиля.\n"
+"Сохранить измененные настройки после переключения профилей?\n"
+"Изменения можно отменить и загрузить настройки по умолчанию из \"%1\"."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Открыть файл(ы)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Параметры профиля"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Среди выбранных файлов мы нашли несколько файлов с G-кодом. Вы можете открыть только один файл за раз. Измените свой выбор, пожалуйста."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Текущие изменения"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Добавление принтера"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Всегда спрашивать меня"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Что нового"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Сбросить и никогда больше не спрашивать"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Сохранить и никогда больше не спрашивать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Отменить изменения"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Сохранить изменения"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "О программе %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "версия: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Полное решение для 3D печати методом наплавления материала."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3618,2007 +3620,2105 @@ msgstr ""
 "Cura разработана компанией Ultimaker B.V. совместно с сообществом.\n"
 "Cura использует следующие проекты с открытым исходным кодом:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Графический интерфейс пользователя"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Фреймворк приложения"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "Генератор G-кода"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "Библиотека межпроцессного взаимодействия"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Язык программирования"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "Фреймворк GUI"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Фреймворк GUI, интерфейс"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ библиотека интерфейса"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Формат обмена данными"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Вспомогательная библиотека для научных вычислений"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Вспомогательная библиотека для быстрых расчётов"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Вспомогательная библиотека для работы с STL файлами"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Вспомогательная библиотека для работы с плоскими объектами"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Вспомогательная библиотека для работы с треугольными сетками"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Вспомогательная библиотека для работы с 3MF файлами"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Вспомогательная библиотека для метаданных файла и потоковой передачи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Библиотека последовательного интерфейса"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "Библиотека ZeroConf"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Библиотека обрезки полигонов"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Средство проверки статического типа для Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Корневые сертификаты для проверки надежности SSL"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Библиотека отслеживания ошибок Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Библиотека упаковки полигонов, разработанная Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Интерфейс Python для libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Шрифт"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "Иконки SVG"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Развертывание приложений для различных дистрибутивов Linux"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Открыть файл проекта"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Это проект Cura. Следует открыть его как проект или просто импортировать из него модели?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Запомнить мой выбор"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Открыть как проект"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Импортировать модели"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Сбросить или сохранить изменения"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"Вы изменили некоторые настройки профиля.\n"
-"Сохранить измененные настройки после переключения профилей?\n"
-"Изменения можно отменить и загрузить настройки по умолчанию из \"%1\"."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Параметры профиля"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Текущие изменения"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Всегда спрашивать меня"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Сбросить и никогда больше не спрашивать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Сохранить и никогда больше не спрашивать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Отменить изменения"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Сохранить изменения"
+msgid "Open file(s)"
+msgstr "Открыть файл(ы)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Мы нашли один или более проектных файлов среди выбранных вами. Вы можете открыть только один файл проекта. Мы предлагаем импортировать только модели их этих файлов. Желаете продолжить?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Импортировать всё как модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Сохранить проект"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Экструдер %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 и материал"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Материал"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Больше не показывать сводку по проекту"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Сохранить"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Печатать выбранную модель с %1"
-msgstr[1] "Печатать выбранные модели с %1"
-msgstr[2] "Печатать выбранные модели с %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Открыть файл проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Это проект Cura. Следует открыть его как проект или просто импортировать из него модели?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Запомнить мой выбор"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Открыть как проект"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Импортировать модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Без имени"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "Файл"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Приветствуем в Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Правка"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Вид"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Приступить"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Параметры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Пусто"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Расширения"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Помогите нам улучшить Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Настройки"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем, включая перечисленные ниже:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "Справка"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Типы принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Новый проект"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Использование материала"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Вы действительно желаете начать новый проект? Это действие очистит область печати и сбросит все несохранённые настройки."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Количество слоев"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Магазин"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Параметры печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Конфигурации"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Данные, собранные Ultimaker Cura, не содержат каких-либо персональных данных."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Дополнительная информация"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Данная конфигурация недоступна, поскольку %1 не распознан. Посетите %2 и загрузите подходящий профиль материала."
+msgid "Add printer by IP address"
+msgstr "Добавить принтер по IP-адресу"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Введите IP-адрес своего принтера."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Добавить"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Магазин"
+msgid "Could not connect to device."
+msgstr "Не удалось подключиться к устройству."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Загрузка доступных конфигураций из принтера..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Не удается подключиться к принтеру Ultimaker?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Конфигурации недоступны, поскольку принтер отключен."
+msgid "The printer at this address has not responded yet."
+msgstr "От принтера с этим адресом еще не поступал ответ."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Выберите конфигурации"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Этот принтер невозможно добавить, поскольку это неизвестный принтер либо он не управляет группой."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Назад"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Подключить"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Конфигурации"
+msgid "Add a printer"
+msgstr "Добавить принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Свое"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Добавить сетевой принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Принтер"
+msgid "Add a non-networked printer"
+msgstr "Добавить принтер, не подключенный к сети"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Включено"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Материал"
+msgid "Add a Cloud printer"
+msgstr "Добавить облачный принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Использовать клей для лучшего прилипания с этой комбинацией материалов."
+msgid "Waiting for Cloud response"
+msgstr "Ожидается ответ от облака"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Печать выбранной модели:"
-msgstr[1] "Печать выбранных моделей:"
-msgstr[2] "Печать выбранных моделей:"
+msgid "No printers found in your account?"
+msgstr "В учетной записи нет принтеров?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Размножить выбранную модель"
-msgstr[1] "Размножить выбранные модели"
-msgstr[2] "Размножить выбранные модели"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Следующие принтеры в вашей учетной записи добавлены в Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Добавить принтер вручную"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Количество копий"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Сохранить проект..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Экспорт..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Экспорт выбранного..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Материал"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Избранные"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Пропустить"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Универсальные"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Пользовательское соглашение"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Подключенные к сети принтеры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Отклонить и закрыть"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Локальные принтеры"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Открыть недавние"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "В вашей сети не найден принтер."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "Принтер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Обновить"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "Материал"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Добавить принтер по IP-адресу"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Установить как активный экструдер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Добавить облачный принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Включить экструдер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Поиск и устранение неисправностей"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Отключить экструдер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Производитель"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Автор профиля"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Имя принтера"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Присвойте имя принтеру"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Последнее обновление: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Учетная запись Ultimaker"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Выйти"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Войти"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Проверка..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Учетная запись синхронизирована"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Что-то пошло не так..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Установить ожидающие обновления"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Проверить наличие обновлений учетной записи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Список объектов"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Видимые параметры"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Показать онлайн-руководство по решению проблем"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Свернуть все категории"
+msgid "Toggle Full Screen"
+msgstr "Полный экран"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Управление видимостью настроек..."
+msgid "Exit Full Screen"
+msgstr "Выйти из полноэкранного режима"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "Отмена"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "Возврат"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "Выход"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "Положение камеры"
+msgid "3D View"
+msgstr "Трехмерный вид"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Вид камеры"
+msgid "Front View"
+msgstr "Вид спереди"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Перспективная"
+msgid "Top View"
+msgstr "Вид сверху"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ортографическая"
+msgid "Left Side View"
+msgstr "Вид слева"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "Рабочий стол"
+msgid "Right Side View"
+msgstr "Вид справа"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Не подключен к принтеру"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Настроить Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Принтер не принимает команды"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "Добавить принтер..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "В режиме обслуживания. Пожалуйста, проверьте принтер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Управление принтерами..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Потеряно соединение с принтером"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Управление материалами..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Печать..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Добавить больше материалов из Магазина"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Приостановлен"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "Обновить профиль текущими параметрами"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Подготовка..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "Сбросить текущие параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Пожалуйста, удалите напечатанное"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "Создать профиль из текущих параметров..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Управление профилями..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Показать онлайн документацию"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Отправить отчёт об ошибке"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Что нового"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "О Cura..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Удалить модель"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Поместить модель по центру"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Сгруппировать модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Разгруппировать модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Объединить модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "Дублировать модель..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Выбрать все модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Очистить стол"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Перезагрузить все модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Выровнять все модели по всем рабочим столам"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Выровнять все модели"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Выровнять выбранные"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Сбросить позиции всех моделей"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Сбросить преобразования всех моделей"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Открыть файл(ы)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "Новый проект..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Показать конфигурационный каталог"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Видимость параметров..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Магазин"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Вычислено"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Параметр"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Профиль"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Текущий"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Единица"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Информация"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Подтвердить изменение диаметра"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Установлен новый диаметр пластиковой нити %1 мм. Это значение несовместимо с текущим экструдером. Продолжить?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Прервать печать"
+msgid "Display Name"
+msgstr "Отображаемое имя"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Вы уверены, что желаете прервать печать?"
+msgid "Material Type"
+msgstr "Тип материала"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Печатается как поддержка."
+msgid "Color"
+msgstr "Цвет"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Другие модели, имеющие перекрытия с этой моделью, изменены."
+msgid "Properties"
+msgstr "Свойства"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Изменено заполнение перекрытия с этой моделью."
+msgid "Density"
+msgstr "Плотность"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Перекрытия с этой моделью не поддерживаются."
+msgid "Diameter"
+msgstr "Диаметр"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Переопределяет %1 настройку."
-msgstr[1] "Переопределяет %1 настройки."
-msgstr[2] "Переопределяет %1 настроек."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Стоимость материала"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Список объектов"
+msgid "Filament weight"
+msgstr "Вес материала"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Длина материала"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Стоимость метра"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Данный материал привязан к %1 и имеет ряд его свойств."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Отвязать материал"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Описание"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Информация об адгезии"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Активировать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Создать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Дублировать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Импорт"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Экспорт"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Принтер"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Подтвердите удаление"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Вы уверены, что желаете удалить %1? Это нельзя будет отменить!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Импортировать материал"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Не могу импортировать материал <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Успешно импортированный материал <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Экспортировать материал"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Не могу экспортировать материал <filename>%1</filename>: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Материал успешно экспортирован в <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Принтеры"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Переименовать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Профили"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Создать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Дублировать"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Создать профиль"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Укажите имя для данного профиля."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Скопировать профиль"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Переименовать профиль"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Импорт профиля"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Экспорт профиля"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Принтер: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Обновить профиль текущими параметрами"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Данный профиль использует настройки принтера по умолчанию, поэтому список ниже пуст."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Ваши текущие параметры совпадают с выбранным профилем."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Общие параметры"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Видимость параметров"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Выбрать все"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Общее"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Интерфейс"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Валюта:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Тема:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Для применения данных изменений вам потребуется перезапустить приложение."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Нарезать автоматически при изменении настроек."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Нарезать автоматически"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Поведение окна"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Подсвечивать красным области модели, требующие поддержек. Без поддержек эти области не будут напечатаны правильно."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Отобразить нависания"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Отметьте отсутствующие или лишние поверхности модели с помощью предупреждающих знаков. В путях инструментов часто будут отсутствовать детали предполагаемой геометрии."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Показывать ошибки модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Перемещать камеру так, чтобы выбранная модель помещалась в центр экрана"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Центрировать камеру на выбранном объекте"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Следует ли инвертировать стандартный способ увеличения в Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Инвертировать направление увеличения камеры."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Увеличивать по мере движения мышкой?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "В ортогональной проекции изменение масштаба мышью не поддерживается."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Увеличивать по движению мышки"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Следует ли размещать модели на столе так, чтобы они больше не пересекались?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Удостовериться, что модели размещены рядом"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Следует ли опустить модели на стол?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Автоматически опускать модели на стол"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Показывать предупреждающее сообщение в средстве считывания G-кода."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Предупреждающее сообщение в средстве считывания G-кода"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Должен ли слой быть переведён в режим совместимости?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Просматривать слои в режиме совместимости (требуется перезапуск)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Открыть Cura на том месте, где вы остановились в прошлый раз?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Восстановить положение окна при запуске"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Рендеринг камеры какого типа следует использовать?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Рендеринг камеры:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Перспективная"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ортографическая"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Открытие и сохранение файлов"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Открывать файлы с компьютера и из внешних приложений в одном экземпляре Cura?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Использовать один экземпляр Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Масштабировать ли модели для размещения внутри печатаемого объёма, если они не влезают в него?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Масштабировать большие модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Модель может показаться очень маленькой, если её размерность задана в метрах, а не миллиметрах. Следует ли масштабировать такие модели?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Масштабировать очень маленькие модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Выбрать модели после их загрузки?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Выбрать модели при загрузке"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Надо ли автоматически добавлять префикс, основанный на имени принтера, к названию задачи на печать?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Добавить префикс принтера к имени задачи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Показывать сводку при сохранении файла проекта?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Показывать сводку при сохранении проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Стандартное поведение при открытии файла проекта"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Стандартное поведение при открытии файла проекта: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Всегда спрашивать меня"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Всегда открывать как проект"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Всегда импортировать модели"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "При внесении изменений в профиль и переключении на другой, будет показан диалог, запрашивающий ваше решение о сохранении ваших изменений, или вы можете указать стандартное поведение и не показывать такой диалог."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Профили"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Поведение по умолчанию для измененных значений настройки при переключении на другой профиль: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Всегда сбрасывать измененные настройки"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Всегда передавать измененные настройки новому профилю"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Приватность"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Должна ли Cura проверять обновления программы при старте?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Проверять обновления при старте"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Можно ли отправлять анонимную информацию о вашей печати в Ultimaker? Следует отметить, что ни модели, ни IP-адреса и никакая другая персональная информация не будет отправлена или сохранена."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Отправлять (анонимно) информацию о печати"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Дополнительная информация"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Активировать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Переименовать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Создать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Дублировать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Импорт"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Экспорт"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Принтер"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Подтвердите удаление"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Вы уверены, что желаете удалить %1? Это нельзя будет отменить!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Импортировать материал"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Не могу импортировать материал <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Просмотр типа"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Успешно импортированный материал <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Не подключен к принтеру"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Экспортировать материал"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Принтер не принимает команды"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Не могу экспортировать материал <filename>%1</filename>: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "В режиме обслуживания. Пожалуйста, проверьте принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Материал успешно экспортирован в <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Потеряно соединение с принтером"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Информация"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Печать..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Подтвердить изменение диаметра"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Приостановлен"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Установлен новый диаметр пластиковой нити %1 мм. Это значение несовместимо с текущим экструдером. Продолжить?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Подготовка..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Отображаемое имя"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Пожалуйста, удалите напечатанное"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Тип материала"
+msgid "Abort Print"
+msgstr "Прервать печать"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Цвет"
+msgid "Are you sure you want to abort the print?"
+msgstr "Вы уверены, что желаете прервать печать?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Свойства"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Параметры поиска"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Плотность"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Скопировать значение для всех экструдеров"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Диаметр"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Копировать все измененные значения для всех экструдеров"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Стоимость материала"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Спрятать этот параметр"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Вес материала"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Не показывать этот параметр"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Длина материала"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Оставить этот параметр видимым"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Стоимость метра"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Некоторые из скрытых параметров используют значения, отличающиеся от их вычисленных значений.\n"
+"\n"
+"Щёлкните, чтобы сделать эти параметры видимыми."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Данный материал привязан к %1 и имеет ряд его свойств."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Этот параметр не используется, поскольку все параметры, на которые он влияет, переопределяются."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Отвязать материал"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Влияет на"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Описание"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Зависит от"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Информация об адгезии"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Данная настройка всегда используется совместно всеми экструдерами. Изменение данного значения приведет к изменению значения для всех экструдеров."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Параметры печати"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Эта настройка получена из конфликтующих значений экструдера:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Создать"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Значение этого параметра отличается от значения в профиле.\n"
+"\n"
+"Щёлкните для восстановления значения из профиля."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Дублировать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Создать профиль"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Укажите имя для данного профиля."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Скопировать профиль"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Переименовать профиль"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Импорт профиля"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Экспорт профиля"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Принтер: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Обновить профиль текущими параметрами"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Сбросить текущие параметры"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Данный профиль использует настройки принтера по умолчанию, поэтому список ниже пуст."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Ваши текущие параметры совпадают с выбранным профилем."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Общие параметры"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Вычислено"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Параметр"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Обычно это значение вычисляется, но в настоящий момент было установлено явно.\n"
+"\n"
+"Щёлкните для восстановления вычисленного значения."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Профиль"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "Трехмерный вид"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Текущий"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Вид спереди"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Единица"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Вид сверху"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Видимость параметров"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Вид слева"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Выбрать все"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Вид справа"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Экструдер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Целевая температура сопла. Сопло будет нагрето или остужено до указанной температуры. Если значение равно 0, то нагрев будет отключен."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Текущая температура данного сопла."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Температура предварительного нагрева сопла."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Отмена"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Преднагрев"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Нагрев сопла перед печатью. Можно продолжать настройки вашей печати во время нагрева, и вам не понадобится ждать нагрева сопла, когда вы будете готовы приступить к печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Цвет материала в данном экструдере."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Материал в данном экструдере."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Сопло, вставленное в данный экструдер."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Рабочий стол"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Целевая температура горячего стола. Стол будет нагреваться и охлаждаться, оставаясь на этой температуре. Если установлена в 0, значит нагрев стола отключен."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Текущая температура горячего стола."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Температура преднагрева горячего стола."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Нагрев горячего стола перед печатью. Вы можете продолжать настройки вашей печати, пока стол нагревается, и вам не понадобится ждать нагрева стола для старта печати."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Управление принтером"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Положение толчковой подачи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Расстояние толчковой подачи"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "Отправить G-код"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Отправить свою команду в G-коде подключенному принтеру. Нажмите Enter (Ввод) для отправки команды."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Принтер не подключен."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Облачный принтер не в сети. Убедитесь, что принтер включен и подключен к Интернету."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Этот принтер не связан с вашей учетной записью. Посетите сайт Ultimaker Digital Factory, чтобы установить привязку."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "В настоящий момент нет подключения к облаку. Для подключения к облачному принтеру выполните вход."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "В настоящий момент нет подключения к облаку. Проверьте подключение к Интернету."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Добавить принтер"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Управление принтерами"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Подключенные принтеры"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Предварительно настроенные принтеры"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Идёт печать"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Job Name"
-msgstr "Имя задачи"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Время печати"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Осталось примерно"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Профиль"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Значения некоторых параметров отличаются от значений профиля.\n"
-"\n"
-"Нажмите для открытия менеджера профилей."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Собственные профили"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Нет %1 профиля для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
-msgstr[1] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
-msgstr[2] "Нет %1 профилей для конфигураций в экструдерах %2. Вместо этого будет использоваться функция по умолчанию"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Настройка печати отключена. Невозможно изменить файл с G-кодом."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Рекомендован"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Свое"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Вкл"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Выкл"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Экспериментальное"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Прилипание"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Разрешает печать каймы или подложки. Это добавляет плоскую область вокруг или под вашим объектом, которую легко удалить после печати."
+msgid "Is printed as support."
+msgstr "Печатается как поддержка."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Постепенное заполнение"
+msgid "Other models overlapping with this model are modified."
+msgstr "Другие модели, имеющие перекрытия с этой моделью, изменены."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Постепенное заполнение будет постепенно увеличивать объём заполнения по направлению вверх."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "В некоторые настройки профиля были внесены изменения. Если их необходимо изменить, перейдите в пользовательский режим."
+msgid "Infill overlapping with this model is modified."
+msgstr "Изменено заполнение перекрытия с этой моделью."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Поддержки"
+msgid "Overlaps with this model are not supported."
+msgstr "Перекрытия с этой моделью не поддерживаются."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Генерация структур для поддержки нависающих частей модели. Без этих структур такие части будут складываться во время печати."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Переопределяет %1 настройку."
+msgstr[1] "Переопределяет %1 настройки."
+msgstr[2] "Переопределяет %1 настроек."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Некоторые из скрытых параметров используют значения, отличающиеся от их вычисленных значений.\n"
-"\n"
-"Щёлкните, чтобы сделать эти параметры видимыми."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Магазин"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Этот параметр не используется, поскольку все параметры, на которые он влияет, переопределяются."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Правка"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Влияет на"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Расширения"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Зависит от"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Настройки"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Данная настройка всегда используется совместно всеми экструдерами. Изменение данного значения приведет к изменению значения для всех экструдеров."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "Справка"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Эта настройка получена из конфликтующих значений экструдера:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Новый проект"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Значение этого параметра отличается от значения в профиле.\n"
-"\n"
-"Щёлкните для восстановления значения из профиля."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Вы действительно желаете начать новый проект? Это действие очистит область печати и сбросит все несохранённые настройки."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Обычно это значение вычисляется, но в настоящий момент было установлено явно.\n"
-"\n"
-"Щёлкните для восстановления вычисленного значения."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Параметры поиска"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Скопировать значение для всех экструдеров"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Копировать все измененные значения для всех экструдеров"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Спрятать этот параметр"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Не показывать этот параметр"
+msgid "This package will be installed after restarting."
+msgstr "Этот пакет будет установлен после перезапуска."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Оставить этот параметр видимым"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Параметры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "Трехмерный вид"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "Закрытие %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Вид спереди"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Вы уверены, что хотите выйти из %1?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Вид сверху"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Установить пакет"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Вид слева"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Открыть файл(ы)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Вид справа"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Среди выбранных файлов мы нашли несколько файлов с G-кодом. Вы можете открыть только один файл за раз. Измените свой выбор, пожалуйста."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Просмотр типа"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Добавление принтера"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Добавить облачный принтер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Что нового"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Ожидается ответ от облака"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Облачный принтер не в сети. Убедитесь, что принтер включен и подключен к Интернету."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "В учетной записи нет принтеров?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Этот принтер не связан с вашей учетной записью. Посетите сайт Ultimaker Digital Factory, чтобы установить привязку."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Следующие принтеры в вашей учетной записи добавлены в Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "В настоящий момент нет подключения к облаку. Для подключения к облачному принтеру выполните вход."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Добавить принтер вручную"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "В настоящий момент нет подключения к облаку. Проверьте подключение к Интернету."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "Завершить"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Производитель"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Автор профиля"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Имя принтера"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Присвойте имя принтеру"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "Добавить принтер"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Добавить сетевой принтер"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Добавить принтер, не подключенный к сети"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "В вашей сети не найден принтер."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "Управление принтерами"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Обновить"
+msgid "Connected printers"
+msgstr "Подключенные принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Добавить принтер по IP-адресу"
+msgid "Preset printers"
+msgstr "Предварительно настроенные принтеры"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Добавить облачный принтер"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Печатать выбранную модель с %1"
+msgstr[1] "Печатать выбранные модели с %1"
+msgstr[2] "Печатать выбранные модели с %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Поиск и устранение неисправностей"
+msgid "Time estimation"
+msgstr "Оценка времени"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Добавить принтер по IP-адресу"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Введите IP-адрес своего принтера."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Добавить"
+msgid "Material estimation"
+msgstr "Оценка материала"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Не удалось подключиться к устройству."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 м"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Не удается подключиться к принтеру Ultimaker?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 г"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "От принтера с этим адресом еще не поступал ответ."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Нарезка на слои..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Этот принтер невозможно добавить, поскольку это неизвестный принтер либо он не управляет группой."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Невозможно нарезать"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Назад"
+msgid "Processing"
+msgstr "Обработка"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Подключить"
+msgid "Slice"
+msgstr "Нарезка на слои"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Учетная запись Ultimaker"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Ваш ключ к дистанционной 3D-печати"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Новые профили печати и подключаемые модули позволяют вам печатать именно то, что вы хотите"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Функция синхронизации настроек и их загрузки из любого места расширяет ваши возможности"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Удаленная работа на принтерах Ultimaker обеспечивает повышение эффективности ваших процессов"
+msgid "Start the slicing process"
+msgstr "Запустить нарезку на слои"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Пропустить"
+msgid "Cancel"
+msgstr "Отмена"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Помогите нам улучшить Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "Оценка времени недоступна"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura собирает анонимные данные для повышения качества печати и улучшения взаимодействия с пользователем, включая перечисленные ниже:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Оценка расходов недоступна"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Типы принтера"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Предварительный просмотр"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Использование материала"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Предоставляет поддержку для подключения и записи на внешний носитель."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Количество слоев"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Плагин для работы с внешним носителем"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Параметры печати"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Обновляет конфигурации Cura 3.5 до Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Данные, собранные Ultimaker Cura, не содержат каких-либо персональных данных."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Обновление версии 3.5 до 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Дополнительная информация"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Обновляет конфигурацию Cura 4.6.2 до Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Пусто"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Обновление версии с 4.6.2 до 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Пользовательское соглашение"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Обновляет настройки Cura 2.2 до Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Отклонить и закрыть"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Обновление версии 2.2 до 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Приветствуем в Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Обновляет конфигурации Cura 4.2 до Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Выполните указанные ниже действия для настройки\n"
-"Ultimaker Cura. Это займет немного времени."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Обновление версии 4.2 до 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Приступить"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Обновляет конфигурацию Cura 4.6.0 до Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Что нового в Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Обновление версии с 4.6.0 до 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Проверка моделей и конфигурации печати для выявления возможных проблем печати; рекомендации."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Обновление настроек Cura 3.0 до Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Средство проверки моделей"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Обновление версии 3.0 до 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Предоставляет поддержку для чтения 3MF файлов."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Обновляет конфигурации Cura 4.0 до Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "Чтение 3MF"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Обновление версии 4.0 до 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Предоставляет возможность записи 3MF файлов."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Обновляет настройки Cura 2.6 до Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "Запись 3MF"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Обновление версии 2.6 до 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Обеспечивает поддержку чтения файлов AMF."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Обновляет настройки Cura 2.5 до Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "Средство чтения AMF"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Обновление версии 2.5 до 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Резервное копирование и восстановление конфигурации."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Обновляет конфигурации Cura 4.1 до Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Резервные копии Cura"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Обновление версии 4.1 до 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Предоставляет интерфейс к движку CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Обновляет настройки Cura 2.1 до Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Движок CuraEngine"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Обновление версии 2.1 до 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Предоставляет поддержку для импорта профилей Cura."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Обновляет настройки Cura 3.2 до Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Чтение профиля Cura"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Обновление версии 3.2 до 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Предоставляет поддержку для экспорта профилей Cura."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Обновляет конфигурации Cura 4.5 до Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Запись профиля Cura"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Обновление версии 4.5 до 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Проверяет наличие обновлений ПО."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Обновляет конфигурации Cura 4.4 до Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Проверка обновлений"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Обновление версии 4.4 до 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Обеспечение действий принтера для обновления прошивки."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Обновляет конфигурации Cura 4.7 до Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Средство обновления прошивки"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Обновление версии 4.7 до 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Считывает G-код из сжатого архива."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Обновляет настройки Cura 3.3 до Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Средство считывания сжатого G-кода"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Обновление версии 3.3 до 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Записывает G-код в сжатый архив."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Обновляет конфигурации Cura 4.3 до Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Средство записи сжатого G-кода"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Обновление версии 4.3 до 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Предоставляет поддержку для импортирования профилей из G-Code файлов."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Обновляет настройки Cura 3.4 до Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "Средство считывания профиля из G-кода"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Обновление версии 3.4 до 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Позволяет загружать и отображать файлы G-code."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Обновляет настройки Cura 2.7 до Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "Чтение G-code"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Обновление версии 2.7 до 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Записывает G-код в файл."
+msgid "Provides support for reading AMF files."
+msgstr "Обеспечивает поддержку чтения файлов AMF."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "Средство записи G-кода"
+msgid "AMF Reader"
+msgstr "Средство чтения AMF"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Обеспечивает возможность генерировать печатаемую геометрию из файлов двухмерных изображений."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Предоставляет поддержку для импортирования профилей из G-Code файлов."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Чтение изображений"
+msgid "G-code Profile Reader"
+msgstr "Средство считывания профиля из G-кода"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Предоставляет поддержку для импортирования профилей из устаревших версий Cura."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Обеспечение действий принтера для обновления прошивки."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Чтение устаревших профилей Cura"
+msgid "Firmware Updater"
+msgstr "Средство обновления прошивки"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Предоставляет возможность изменения параметров принтера (такие как рабочий объём, диаметр сопла и так далее)"
+msgid "Provides support for reading X3D files."
+msgstr "Предоставляет поддержку для чтения X3D файлов."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Параметры принтера действие"
+msgid "X3D Reader"
+msgstr "Чтение X3D"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Обеспечивает этап мониторинга в Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Поиск, управление и установка новых пакетов Cura."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Этап мониторинга"
+msgid "Toolbox"
+msgstr "Панель инструментов"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5640,75 +5740,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Пост обработка"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Обеспечивает подготовительный этап в Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Предоставляет интерфейс к движку CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Подготовительный этап"
+msgid "CuraEngine Backend"
+msgstr "Движок CuraEngine"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Обеспечивает действия на этапе предварительного просмотра в Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Принимает G-Code и отправляет его на принтер. Плагин также может обновлять прошивку."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Этап предварительного просмотра"
+msgid "USB printing"
+msgstr "Печать через USB"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Предоставляет поддержку для подключения и записи на внешний носитель."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Предоставляет поддержку для экспорта профилей Cura."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Плагин для работы с внешним носителем"
+msgid "Cura Profile Writer"
+msgstr "Запись профиля Cura"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Регистрирует определенные события в журнале, чтобы их можно было использовать в отчетах об аварийном завершении работы"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Управляет сетевыми соединениями с сетевыми принтерами Ultimaker 3."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Контрольный журнал"
+msgid "Ultimaker Network Connection"
+msgstr "Соединение с сетью Ultimaker"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Открытие вида моделирования."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Предоставляет дополнительные возможности для принтеров Ultimaker (такие как мастер выравнивания стола, выбора обновления и так далее)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Вид моделирования"
+msgid "Ultimaker machine actions"
+msgstr "Действия с принтерами Ultimaker"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Отправляет анонимную информацию о нарезке моделей. Может быть отключено через настройки."
+msgid "Provides support for reading 3MF files."
+msgstr "Предоставляет поддержку для чтения 3MF файлов."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Информация о нарезке модели"
+msgid "3MF Reader"
+msgstr "Чтение 3MF"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Предоставляет просмотр твёрдого тела."
+msgid "Writes g-code to a compressed archive."
+msgstr "Записывает G-код в сжатый архив."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Обзор"
+msgid "Compressed G-code Writer"
+msgstr "Средство записи сжатого G-кода"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Считывает G-код из сжатого архива."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Средство считывания сжатого G-кода"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Проверка моделей и конфигурации печати для выявления возможных проблем печати; рекомендации."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Средство проверки моделей"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Проверяет наличие обновлений ПО."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Проверка обновлений"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Позволяет загружать и отображать файлы G-code."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "Чтение G-code"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5720,16 +5860,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Средство стирания элемента поддержки"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Поиск, управление и установка новых пакетов Cura."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Панель инструментов"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5740,6 +5870,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Средство чтения Trimesh"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Регистрирует определенные события в журнале, чтобы их можно было использовать в отчетах об аварийном завершении работы"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Контрольный журнал"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5750,265 +5890,256 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "Средство считывания UFP"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Предоставляет поддержку для записи пакетов формата Ultimaker."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "Средство записи UFP"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Предоставляет дополнительные возможности для принтеров Ultimaker (такие как мастер выравнивания стола, выбора обновления и так далее)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Предоставляет поддержку для импортирования профилей из устаревших версий Cura."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Действия с принтерами Ultimaker"
+msgid "Legacy Cura Profile Reader"
+msgstr "Чтение устаревших профилей Cura"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Управляет сетевыми соединениями с сетевыми принтерами Ultimaker 3."
+msgid "Provides a prepare stage in Cura."
+msgstr "Обеспечивает подготовительный этап в Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Соединение с сетью Ultimaker"
+msgid "Prepare Stage"
+msgstr "Подготовительный этап"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Принимает G-Code и отправляет его на принтер. Плагин также может обновлять прошивку."
+msgid "Provides a monitor stage in Cura."
+msgstr "Обеспечивает этап мониторинга в Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "Печать через USB"
+msgid "Monitor Stage"
+msgstr "Этап мониторинга"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Обновляет настройки Cura 2.1 до Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Предоставляет рентгеновский вид."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Обновление версии 2.1 до 2.2"
+msgid "X-Ray View"
+msgstr "Просмотр в рентгене"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Обновляет настройки Cura 2.2 до Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Предоставляет возможность записи 3MF файлов."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Обновление версии 2.2 до 2.4"
+msgid "3MF Writer"
+msgstr "Запись 3MF"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Обновляет настройки Cura 2.5 до Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Отправляет анонимную информацию о нарезке моделей. Может быть отключено через настройки."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Обновление версии 2.5 до 2.6"
+msgid "Slice info"
+msgstr "Информация о нарезке модели"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Обновляет настройки Cura 2.6 до Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Обеспечивает действия на этапе предварительного просмотра в Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Обновление версии 2.6 до 2.7"
+msgid "Preview Stage"
+msgstr "Этап предварительного просмотра"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Обновляет настройки Cura 2.7 до Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Открытие вида моделирования."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Обновление версии 2.7 до 3.0"
+msgid "Simulation View"
+msgstr "Вид моделирования"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Обновление настроек Cura 3.0 до Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Предоставляет возможность изменения параметров принтера (такие как рабочий объём, диаметр сопла и так далее)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Обновление версии 3.0 до 3.1"
+msgid "Machine Settings Action"
+msgstr "Параметры принтера действие"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Обновляет настройки Cura 3.2 до Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Предоставляет возможности по чтению и записи профилей материалов в виде XML."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Обновление версии 3.2 до 3.3"
+msgid "Material Profiles"
+msgstr "Профили материалов"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Обновляет настройки Cura 3.3 до Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Предоставляет просмотр твёрдого тела."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Обновление версии 3.3 до 3.4"
+msgid "Solid View"
+msgstr "Обзор"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Обновляет настройки Cura 3.4 до Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Предоставляет поддержку для импорта профилей Cura."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Обновление версии 3.4 до 3.5"
+msgid "Cura Profile Reader"
+msgstr "Чтение профиля Cura"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Обновляет конфигурации Cura 3.5 до Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Предоставляет поддержку для записи пакетов формата Ultimaker."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Обновление версии 3.5 до 4.0"
+msgid "UFP Writer"
+msgstr "Средство записи UFP"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Обновляет конфигурации Cura 4.0 до Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Записывает G-код в файл."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Обновление версии 4.0 до 4.1"
+msgid "G-code Writer"
+msgstr "Средство записи G-кода"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Обновляет конфигурации Cura 4.1 до Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Обеспечивает возможность генерировать печатаемую геометрию из файлов двухмерных изображений."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Обновление версии 4.1 до 4.2"
+msgid "Image Reader"
+msgstr "Чтение изображений"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Обновляет конфигурации Cura 4.2 до Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Резервное копирование и восстановление конфигурации."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Обновление версии 4.2 до 4.3"
+msgid "Cura Backups"
+msgstr "Резервные копии Cura"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Обновляет конфигурации Cura 4.3 до Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Общий стек отсутствует."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Обновление версии 4.3 до 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Модель не размножена. Выделены области с отсутствующими или лишними поверхностями."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Обновляет конфигурации Cura 4.4 до Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Ошибки модели"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Обновление версии 4.4 до 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Толщина слоя"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Обновляет конфигурации Cura 4.5 до Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Ваш ключ к дистанционной 3D-печати"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Обновление версии 4.5 до 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Новые профили печати и подключаемые модули позволяют вам печатать именно то, что вы хотите\n"
+#~ "- Функция синхронизации настроек и их загрузки из любого места расширяет ваши возможности\n"
+#~ "- Удаленная работа на принтерах Ultimaker обеспечивает повышение эффективности ваших процессов"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Обновляет конфигурацию Cura 4.6.0 до Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Создать учетную запись"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Обновление версии с 4.6.0 до 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Удалить выбранную модель"
+#~ msgstr[1] "Удалить выбранные модели"
+#~ msgstr[2] "Удалить выбранные модели"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Обновляет конфигурацию Cura 4.6.2 до Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Центрировать выбранную модель"
+#~ msgstr[1] "Центрировать выбранные модели"
+#~ msgstr[2] "Центрировать выбранные модели"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Обновление версии с 4.6.2 до 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Размножить выбранную модель"
+#~ msgstr[1] "Размножить выбранные модели"
+#~ msgstr[2] "Размножить выбранные модели"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Обновляет конфигурации Cura 4.7 до Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Завершить"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Обновление версии 4.7 до 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Учетная запись Ultimaker"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Предоставляет поддержку для чтения X3D файлов."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Ваш ключ к дистанционной 3D-печати"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "Чтение X3D"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Новые профили печати и подключаемые модули позволяют вам печатать именно то, что вы хотите"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Предоставляет возможности по чтению и записи профилей материалов в виде XML."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Функция синхронизации настроек и их загрузки из любого места расширяет ваши возможности"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Профили материалов"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Удаленная работа на принтерах Ultimaker обеспечивает повышение эффективности ваших процессов"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Предоставляет рентгеновский вид."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Выполните указанные ниже действия для настройки\n"
+#~ "Ultimaker Cura. Это займет немного времени."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Просмотр в рентгене"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Что нового в Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/ru_RU/fdmextruder.def.json.po b/resources/i18n/ru_RU/fdmextruder.def.json.po
index 1ff7f2c3fe..7122adaebd 100644
--- a/resources/i18n/ru_RU/fdmextruder.def.json.po
+++ b/resources/i18n/ru_RU/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
diff --git a/resources/i18n/ru_RU/fdmprinter.def.json.po b/resources/i18n/ru_RU/fdmprinter.def.json.po
index 2643199b85..ee5bcbf9fd 100644
--- a/resources/i18n/ru_RU/fdmprinter.def.json.po
+++ b/resources/i18n/ru_RU/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Russian <info@lionbridge.com>, Ruslan Popov <ruslan.popov@gmail.com>, Russian <info@bothof.nl>\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Указывает, используют ли для все экструдеры общий нагреватель или у каждого имеется отдельный."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Запрещенные области"
@@ -487,8 +507,8 @@ msgstr "Смещение с экструдером"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Применить смещение экструдера к системе координат."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "Множитель для ширины линии первого сло�
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Ограждение"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Расстояние перемещения, добавленное после печати внешней стенки, чтобы лучше спрятать Z шов."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Экструдер для печати крышки"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "Экструдер, используемый для печати верхних оболочек. Используется при наличии нескольких экструдеров."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Слои верхней оболочки"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Количество верхних слоёв оболочки. Обычно достаточно одного слоя для получения верхних поверхностей в хорошем качестве."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Экструдер дна/крышки"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Экструдер, используемый для печати верхней и нижней оболочек. Используется при наличии нескольких экструдеров."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Толщина дна/крышки"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Толщина слоя дна/крышки при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в дне/крышке."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Толщина крышки"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Толщина крышки при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в крышке."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Слои крышки"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Количество слоёв в крышке. При вычислении толщины крышки это значение округляется до целого."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Толщина дна"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Толщина дна при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в дне."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Слои дна"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Количество слоёв в дне. При вычислении толщины дна это значение округляется до целого."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Начальные слои дна"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Количество начальных слоев дна, вверх от рабочего стола. При вычислении толщины дна это значение округляется до целого."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Шаблон для крышки/дна"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Шаблон слоёв для крышки/дна."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Линии"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Концентрический"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Зигзаг"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Нижний шаблон начального слоя"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Шаблон низа печати на первом слое."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Линии"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Концентрический"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Зигзаг"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Соединение верхних/нижних полигонов"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Соединение верхних/нижних путей оболочки на участках, где они проходят рядом. При использовании концентрического шаблона активация данной настройки значительно сокращает время перемещения, но, учитывая возможность наличия соединений на полпути над заполнением, эта функция может ухудшить качество верхней поверхности."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Направление линии дна/крышки"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Список направлений линии при печати слоёв дна/крышки линиями или зигзагом. Элементы списка используются последовательно по мере печати слоёв, и, когда конец списка будет достигнут, он начнётся сначала. Элементы списка отделяются запятыми и сам список заключён в квадратные скобки. По умолчанию, он пустой, что означает использование стандартных углов (45 и 135 градусов)."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Вставка внешней стенки"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Когда включено, координаты Z шва привязаны к центру каждой части. Когда отключено, координаты определяются от абсолютной позиции на столе."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Экструдер для печати крышки"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "Экструдер, используемый для печати верхних оболочек. Используется при наличии нескольких экструдеров."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Слои верхней оболочки"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Количество верхних слоёв оболочки. Обычно достаточно одного слоя для получения верхних поверхностей в хорошем качестве."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Экструдер дна/крышки"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Экструдер, используемый для печати верхней и нижней оболочек. Используется при наличии нескольких экструдеров."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Толщина дна/крышки"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Толщина слоя дна/крышки при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в дне/крышке."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Толщина крышки"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Толщина крышки при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в крышке."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Слои крышки"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Количество слоёв в крышке. При вычислении толщины крышки это значение округляется до целого."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Толщина дна"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Толщина дна при печати. Это значение, разделённое на высоту слоя, определяет количество слоёв в дне."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Слои дна"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Количество слоёв в дне. При вычислении толщины дна это значение округляется до целого."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Начальные слои дна"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Количество начальных слоев дна, вверх от рабочего стола. При вычислении толщины дна это значение округляется до целого."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Шаблон для крышки/дна"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Шаблон слоёв для крышки/дна."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Линии"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Концентрический"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Зигзаг"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Нижний шаблон начального слоя"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Шаблон низа печати на первом слое."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Линии"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Концентрический"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Зигзаг"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Соединение верхних/нижних полигонов"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Соединение верхних/нижних путей оболочки на участках, где они проходят рядом. При использовании концентрического шаблона активация данной настройки значительно сокращает время перемещения, но, учитывая возможность наличия соединений на полпути над заполнением, эта функция может ухудшить качество верхней поверхности."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Направление линии дна/крышки"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Список направлений линии при печати слоёв дна/крышки линиями или зигзагом. Элементы списка используются последовательно по мере печати слоёв, и, когда конец списка будет достигнут, он начнётся сначала. Элементы списка отделяются запятыми и сам список заключён в квадратные скобки. По умолчанию, он пустой, что означает использование стандартных углов (45 и 135 градусов)."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Нет оболочки в Z-зазорах"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Настройте величину перекрытия между стенками и центральными линиями оболочки (конечными точками). Небольшое перекрытие позволяет стенкам надежно соединяться с оболочкой. Обратите внимание, что при одинаковой толщине оболочки и ширине линии стенки любое значение, превышающее половину ширины стенки, может привести к размещению любой оболочки за пределами стенки. Это обусловлено тем, что в этот момент расположение сопла экструдера оболочки может сместиться за середину стенки."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Ширина удаляемой оболочки"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати верхних/нижних оболочек наклонных поверхностей модели."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Ширина удаляемой оболочки сверху"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати верхних оболочек наклонных поверхностей модели."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Ширина удаляемой оболочки снизу"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати нижних оболочек наклонных поверхностей модели."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Дистанция расширения оболочки"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Расстояние на которое оболочки внедряются в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Дистанция расширения оболочки сверху"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Расстояние на которое верхние оболочки входят в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Расстояние расширения оболочки снизу"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Расстояние на которое нижние оболочки входят в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Максимальный угол оболочки при расширении"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Минимальная ширина оболочки при расширении"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Области оболочек уже указанного значения не расширяются. Это предотвращает расширение узких областей оболочек, которые создаются, если наклон поверхности модели близок к вертикальному."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Заполнение"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Минимальный угол внутренних нависаний, для которых добавляется заполнение. При 0° объекты полностью заполняются, при 90° заполнение отсутствует."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Ширина удаляемой оболочки"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати верхних/нижних оболочек наклонных поверхностей модели."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Ширина удаляемой оболочки сверху"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати верхних оболочек наклонных поверхностей модели."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Ширина удаляемой оболочки снизу"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Наибольшая ширина областей оболочки, которые будут удалены. Каждая область оболочки, которая меньше указанного значения, будет удалена. Это может помочь с сокращением затрат времени и материала при печати нижних оболочек наклонных поверхностей модели."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Дистанция расширения оболочки"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Расстояние на которое оболочки внедряются в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Дистанция расширения оболочки сверху"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Расстояние на которое верхние оболочки входят в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Расстояние расширения оболочки снизу"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Расстояние на которое нижние оболочки входят в заполнение. Большие значения лучше связывают оболочку с шаблоном заполнения и стенками. Меньшие значения сохраняют используемый материал."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Максимальный угол оболочки при расширении"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Верхняя и/или нижняя поверхности вашего объекта с углом больше указанного в данном параметре, не будут иметь расширенные оболочки дна/крышки. Это предотвращает расширение узких областей оболочек, которые создаются, если поверхность модели имеет почти вертикальный наклон. Угол в 0° является горизонтальным, а в 90° - вертикальным."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Минимальная ширина оболочки при расширении"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Области оболочек уже указанного значения не расширяются. Это предотвращает расширение узких областей оболочек, которые создаются, если наклон поверхности модели близок к вертикальному."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Толщина опоры края оболочки"
@@ -2561,8 +2591,8 @@ msgstr "Скорость первого слоя"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "Скорость печати первого слоя. Пониженное значение помогает улучшить прилипание материала к столу."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,8 +5105,8 @@ msgstr "Порядок обработки объекта"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Определяет приоритет данного объекта при вычислении нескольких перекрывающихся заполняющих объектов. К областям с несколькими перекрывающимися заполняющими объектами будут применяться настройки объекта более низкого порядка. Заполняющий объект более высокого порядка будет модифицировать заполнение объектов более низких порядков и обычных объектов."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Максимальный угол нависания, после которого они становятся печатаемыми. При значении в 0° все нависания заменяются частью модели, соединённой со столом, при 90° в модель не вносится никаких изменений."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Разрешить накат"
@@ -6362,6 +6402,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Матрица преобразования, применяемая к модели при её загрузке из файла."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Применить смещение экструдера к системе координат."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Ограждение"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Верхняя и/или нижняя поверхности вашего объекта с углом больше указанного в данном параметре, не будут иметь расширенные оболочки дна/крышки. Это предотвращает расширение узких областей оболочек, которые создаются, если поверхность модели имеет почти вертикальный наклон. Угол в 0° является горизонтальным, а в 90° - вертикальным."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "Скорость печати первого слоя. Пониженное значение помогает улучшить прилипание материала к столу."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Определяет приоритет данного объекта при вычислении нескольких перекрывающихся заполняющих объектов. К областям с несколькими перекрывающимися заполняющими объектами будут применяться настройки объекта более низкого порядка. Заполняющий объект более высокого порядка будет модифицировать заполнение объектов более низких порядков и обычных объектов."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Температура, задаваемая для разогретого рабочего стола. Если значение равно 0, температура основания не будет регулироваться."
diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po
index 65778e4af8..82b3431887 100644
--- a/resources/i18n/tr_TR/cura.po
+++ b/resources/i18n/tr_TR/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Turkish <info@lionbridge.com>, Turkish <info@bothof.nl>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.2.4\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Bilinmiyor"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Makineler yükleniyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Aşağıdaki yazıcı(lar) bir grubun parçası olmadıkları için bağlanamıyor"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Tercihler ayarlanıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Mevcut ağ yazıcıları"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Etkin Makine Başlatılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Geçersiz kılınmadı"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Makine yöneticisi başlatılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "{0} yazıcısını kaldırmak istediğinizden emin misiniz? Bu işlem geri alınamaz!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Yapı hacmi başlatılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Görünüm ayarlanıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Görsel"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Arayüz yükleniyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Görsel profili, yüksek görsel ve yüzey kalitesi oluşturmak amacıyla, görsel prototipler ve modeller basılması için tasarlanmıştır."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Motor başlatılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Mühendislik profili, daha yüksek doğruluk ve daha yakın toleranslar sağlamak amacıyla, işlevsel prototipler ve son kullanım parçaları basılması için tasarlanmıştır."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Aynı anda yalnızca bir G-code dosyası yüklenebilir. {0} içe aktarma atlandı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Taslak"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Uyarı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Taslak profili, baskı süresinin önemli ölçüde kısaltılması amacıyla, birincil prototipler basılması ve konsept doğrulaması yapılması için tasarlanmıştır."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "G-code yüklenirken başka bir dosya açılamaz. {0} içe aktarma atlandı"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Hata"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "{0} yazıcısını kaldırmak istediğinizden emin misiniz? Bu işlem geri alınamaz!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Özel Malzeme"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Özel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Bilinmiyor"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Özel profiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Tüm desteklenen türler ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Tüm Dosyalar (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Giriş başarısız"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Nesneler için yeni konum bulunuyor"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Konumu Buluyor"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Görsel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Yapılan hacim içinde tüm nesneler için konum bulunamadı"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Görsel profili, yüksek görsel ve yüzey kalitesi oluşturmak amacıyla, görsel prototipler ve modeller basılması için tasarlanmıştır."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Konum Bulunamıyor"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Kullanıcı veri dizininden arşiv oluşturulamadı: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Mühendislik profili, daha yüksek doğruluk ve daha yakın toleranslar sağlamak amacıyla, işlevsel prototipler ve son kullanım parçaları basılması için tasarlanmıştır."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Yedekle"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Taslak"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Uygun veri veya meta veri olmadan Cura yedeği geri yüklenmeye çalışıldı."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Taslak profili, baskı süresinin önemli ölçüde kısaltılması amacıyla, birincil prototipler basılması ve konsept doğrulaması yapılması için tasarlanmıştır."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Geçerli sürümünüzden yüksek bir sürüme sahip bir Cura yedeği geri yüklenmeye çalışıldı."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Aşağıdaki yazıcı(lar) bir grubun parçası olmadıkları için bağlanamıyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Portalın yazdırılan modeller ile çarpışmasını önlemek için yapı hacmi yüksekliği “Sıralamayı Yazdır” ayarı nedeniyle azaltıldı."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Mevcut ağ yazıcıları"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Yapı Disk Bölümü"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Geçersiz kılınmadı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura başlatılamıyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>Sorunu düzeltmek için lütfen bu Çökme Raporunu bize gönderin.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Çökme raporunu Ultimaker’a gönder"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Ayrıntılı çökme raporu göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Yapılandırma Klasörünü Göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Yapılandırmayı Yedekle ve Sıfırla"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Çökme Raporu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1125 +249,780 @@ msgstr ""
 "            <p>Sunucularımıza otomatik olarak bir hata raporu yüklemek için lütfen \"Rapor gönder\" düğmesini kullanın</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Sistem bilgileri"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Bilinmiyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura sürümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura dili"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "İşletim sistemi dili"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt Sürümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt Sürümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Henüz başlatılmadı<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL Sürümü: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL Satıcısı: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL Oluşturucusu: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Hata geri izleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Günlükler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Rapor gönder"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Makineler yükleniyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Tercihler ayarlanıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Etkin Makine Başlatılıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Makine yöneticisi başlatılıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Yapı hacmi başlatılıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Görünüm ayarlanıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Arayüz yükleniyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Motor başlatılıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Aynı anda yalnızca bir G-code dosyası yüklenebilir. {0} içe aktarma atlandı"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Uyarı"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "G-code yüklenirken başka bir dosya açılamaz. {0} içe aktarma atlandı"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Hata"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Nesneler çoğaltılıyor ve yerleştiriliyor"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Nesneler Yerleştiriliyor"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Nesne Yerleştiriliyor"
+msgid "Login failed"
+msgstr "Giriş başarısız"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Yanıt okunamadı."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Yeni bir oturum açma işlemi başlatılamıyor. Başka bir aktif oturum açma girişimi olup olmadığını kontrol edin."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Ultimaker hesabı sunucusuna ulaşılamadı."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "Sağlanan durum doğru değil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Lütfen bu başvuruya yetki verirken gerekli izinleri verin."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Oturum açmaya çalışırken beklenmeyen bir sorun oluştu, lütfen tekrar deneyin."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Yeni bir oturum açma işlemi başlatılamıyor. Başka bir aktif oturum açma girişimi olup olmadığını kontrol edin."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Ultimaker hesabı sunucusuna ulaşılamadı."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Dosya Zaten Mevcut"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Dosya <filename>{0}</filename> zaten mevcut. Üstüne yazmak istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Geçersiz dosya URL’si:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozül"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "Ayarlar, ekstrüderlerin mevcut kullanılabilirliğine uyacak şekilde değiştirildi:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Ayarlar güncellendi"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Ekstrüder(ler) Devre Dışı Bırakıldı"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Profilin <filename>{0}</filename> dosyasına aktarımı başarısız oldu: Yazıcı eklentisinde rapor edilen hata."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Profil <filename>{0}</filename> dosyasına aktarıldı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "Dışa aktarma başarılı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Yazıcı eklenmeden önce profil, <filename>{0}</filename> dosyasından içe aktarılamaz."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "<filename>{0}</filename> dosyasında içe aktarılabilecek özel profil yok"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Bu <filename>{0}</filename> profili yanlış veri içeriyor, içeri aktarılamadı."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename> dosyasından profil içe aktarımı başarısız oldu:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "{0} profili başarıyla içe aktarıldı."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Dosya {0} geçerli bir profil içermemekte."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Profil {0} öğesinde bilinmeyen bir dosya türü var veya profil bozuk."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Özel profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Profilde eksik bir kalite tipi var."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Genel yığın eksik."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Profil eklenemiyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "'{0}' kalite tipi, mevcut aktif makine tanımı '{1}' ile uyumlu değil."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Uyarı: Profilin '{0}' kalite tipi, mevcut yapılandırma için kullanılabilir olmadığından profil görünür değil. Bu kalite tipini kullanabilen malzeme/nozül"
-" kombinasyonuna geçiş yapın."
+msgstr "Uyarı: Profilin '{0}' kalite tipi, mevcut yapılandırma için kullanılabilir olmadığından profil görünür değil. Bu kalite tipini kullanabilen malzeme/nozül kombinasyonuna geçiş yapın."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Desteklenmiyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozül"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "Ayarlar, ekstrüderlerin mevcut kullanılabilirliğine uyacak şekilde değiştirildi:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Nesneler için yeni konum bulunuyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Ayarlar güncellendi"
+msgid "Finding Location"
+msgstr "Konumu Buluyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Yapılan hacim içinde tüm nesneler için konum bulunamadı"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Ekstrüder(ler) Devre Dışı Bırakıldı"
+msgid "Can't Find Location"
+msgstr "Konum Bulunamıyor"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Grup #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Ekle"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Bitir"
+msgid "Close"
+msgstr "Kapat"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "İptal Et"
+msgid "Next"
+msgstr "Sonraki"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Grup #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Bitir"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Dış Duvar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "İç Duvarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Yüzey Alanı"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Dolgu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Destek Dolgusu"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Destek Arayüzü"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Destek"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Etek"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Astarlama Direği"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Hareket"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Geri Çekmeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Diğer"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Sonraki"
+msgid "Add"
+msgstr "Ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Kapat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D Model Yardımcısı"
+msgid "Cancel"
+msgstr "İptal Et"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Model boyutu ve model yapılandırması nedeniyle bir veya daha fazla 3D model optimum yazdırılamayabilir:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>En iyi kalite ve güvenilirliği nasıl elde edeceğinizi öğrenin.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Yazdırma kalitesi kılavuzunu görüntüleyin</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Proje dosyası <filename>{0}</filename> bilinmeyen bir makine tipi içeriyor: <message>{1}</message>. Makine alınamıyor. Bunun yerine modeller alınacak."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Proje Dosyası Aç"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "<filename>{0}</filename> proje dosyası aniden erişilemez oldu: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Proje Dosyası Açılamıyor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "<filename>{0}</filename> proje dosyası, Ultimaker Cura'nın bu sürümünde bilinmeyen profiller kullanılarak yapılmış."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Önerilen Ayarlar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Özel"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF Dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF Writer eklentisi bozuk."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Burada çalışma alanını yazmak için izin yok."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "İşletim sistemi, proje dosyalarının bu konuma veya bu dosya adıyla kaydedilmesine izin vermiyor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "3mf dosyasını yazarken hata oluştu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura Projesi 3MF dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF Dosyası"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Portalın yazdırılan modeller ile çarpışmasını önlemek için yapı hacmi yüksekliği “Sıralamayı Yazdır” ayarı nedeniyle azaltıldı."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Yedeklemeler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Yedeklemeniz yüklenirken bir hata oluştu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Yedeklemeniz oluşturuluyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Yedeklemeniz oluşturulurken bir hata oluştu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Yedeklemeniz yükleniyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Yedeklemenizin yüklenmesi tamamlandı."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "Yedekleme maksimum dosya boyutunu aşıyor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Yedeklemeniz geri yüklenirken bir hata oluştu."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Yedeklemeleri yönet"
+msgid "Build Volume"
+msgstr "Yapı Disk Bölümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Mevcut malzeme, seçilen makine veya yapılandırma ile uyumlu olmadığından mevcut malzeme ile dilimlenemedi."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Kullanıcı veri dizininden arşiv oluşturulamadı: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Dilimlenemedi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Geçerli ayarlarla dilimlenemiyor. Şu ayarlarda hata var: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Modele özgü ayarlar nedeniyle dilimlenemedi. Şu ayarlar bir veya daha fazla modelde hataya yol açıyor: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "İlk direk veya ilk konum(lar) geçersiz olduğu için dilimlenemiyor."
+msgid "Backup"
+msgstr "Yedekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Etkisizleştirilmiş Extruder %s ile ilgili nesneler olduğundan dilimleme yapılamıyor."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Uygun veri veya meta veri olmadan Cura yedeği geri yüklenmeye çalışıldı."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Lütfen ayarları gözden geçirin ve modellerinizi şu durumlara karşı kontrol edin:\n"
-"- Yapı hacmine sığma\n"
-"- Etkin bir ekstrüdere atanma\n"
-"- Değiştirici kafesler olarak ayarlanmama"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Geçerli sürümünüzden yüksek bir sürüme sahip bir Cura yedeği geri yüklenmeye çalışıldı."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Katmanlar İşleniyor"
+msgid "Multiplying and placing objects"
+msgstr "Nesneler çoğaltılıyor ve yerleştiriliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Bilgi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura Profili"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Güncelleme bilgilerine erişilemedi."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "{machine_name} cihazınız için yeni özellikler veya hata düzeltmeleri mevcut olabilir! Henüz son sürüme geçmediyseniz yazıcınızın donanım yazılımını {latest_version} sürümüne güncellemeniz önerilir."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Yeni %s bellenimi mevcut"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Nasıl güncellenir"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Aygıt Yazılımını Güncelle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Sıkıştırılmış G-code Dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter yazı modunu desteklemez."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-code ayrıştırma"
+msgid "Placing Objects"
+msgstr "Nesneler Yerleştiriliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code Ayrıntıları"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Dosya göndermeden önce g-code’un yazıcınız ve yazıcı yapılandırmanız için uygun olduğundan emin olun. G-code temsili doğru olmayabilir."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G Dosyası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter metin dışı modu desteklemez."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Lütfen dışa aktarmadan önce G-code'u hazırlayın."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG Resmi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG Resmi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG Resmi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP Resmi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF Resmi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 profilleri"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Makine Ayarları"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Görüntüle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Model Başına Ayarlar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Model Başına Ayarları Yapılandır"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Son İşleme"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-Code Öğesini Değiştir"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Hazırla"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Önizleme"
+msgid "Placing Object"
+msgstr "Nesne Yerleştiriliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Çıkarılabilir Sürücüye Kaydet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Çıkarılabilir Sürücüye Kaydediliyor {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Yazılacak dosya biçimleri mevcut değil!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Çıkarılabilir Sürücü <filename>{0}</filename> Üzerine Kaydediliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Kaydediliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "<filename>{0}</filename> dosyasına kaydedilemedi: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "{device} üzerine yazmaya çalışırken dosya adı bulunamadı."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Çıkarılabilir aygıta {0} kaydedilemedi: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Çıkarılabilir Sürücüye {0}, {1} olarak kaydedildi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Dosya Kaydedildi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Çıkar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Çıkarılabilir aygıtı çıkar {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "Çıkarıldı {0}. Şimdi sürücüyü güvenle kaldırabilirsiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Donanımı Güvenli Bir Şekilde Kaldırın"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Çıkarma işlemi başarısız oldu {0}. Başka bir program sürücüyü kullanıyor olabilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Çıkarılabilir Sürücü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Kablo Yazdırma etkinleştirildiğinde Cura, katmanları doğru olarak görüntülemez."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simülasyon Görünümü"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Önce dilimleme yapmanız gerektiğinden hiçbir şey gösterilmez."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Görüntülenecek katman yok"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Bu mesajı bir daha gösterme"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Katman görünümü"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Modeliniz çok katmanlı değil. Vurgulanan alanlar eksik ya da ikincil yüzeyleri gösterir."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Model hataları"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Gerçek görünüm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Destek Engelleyici"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Desteklerin yazdırılmadığı bir hacim oluşturun."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Malzeme ve yazılım paketlerini hesabınızla senkronize etmek istiyor musunuz?"
+msgid "AMF File"
+msgstr "AMF Dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Ultimaker hesabınızda değişiklik tespit edildi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Senkronize et"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Aygıt Yazılımını Güncelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Senkronize ediliyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Reddet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Kabul ediyorum"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Eklenti Lisans Anlaşması"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Reddet ve hesaptan kaldır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} eklenti indirilemedi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Senkronize ediliyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Ultimaker hesabınızda değişiklik tespit edildi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "Değişikliklerin etkili olması için {} uygulamasını kapatarak yeniden başlatmalısınız."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} eklenti indirilemedi"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Malzeme ve yazılım paketlerini hesabınızla senkronize etmek istiyor musunuz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Senkronize et"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Model Başına Ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Model Başına Ayarları Yapılandır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Son İşleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-Code Öğesini Değiştir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Mevcut malzeme, seçilen makine veya yapılandırma ile uyumlu olmadığından mevcut malzeme ile dilimlenemedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Biçim Paketi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Dilimlenemedi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "UFP dosyasına yazamıyor:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Geçerli ayarlarla dilimlenemiyor. Şu ayarlarda hata var: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Yapı levhasını dengele"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Modele özgü ayarlar nedeniyle dilimlenemedi. Şu ayarlar bir veya daha fazla modelde hataya yol açıyor: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Yükseltmeleri seçin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "İlk direk veya ilk konum(lar) geçersiz olduğu için dilimlenemiyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Bulut üzerinden yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Etkisizleştirilmiş Extruder %s ile ilgili nesneler olduğundan dilimleme yapılamıyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Bulut üzerinden yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Lütfen ayarları gözden geçirin ve modellerinizi şu durumlara karşı kontrol edin:\n"
+"- Yapı hacmine sığma\n"
+"- Etkin bir ekstrüdere atanma\n"
+"- Değiştirici kafesler olarak ayarlanmama"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Bulut üzerinden bağlı"
+msgid "Processing Layers"
+msgstr "Katmanlar İşleniyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Baskı işi yüklenirken bilinmeyen hata kodu: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Bilgi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB yazdırma"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "USB ile yazdır"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "USB ile yazdır"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "USB ile bağlı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB’den yazdırma devam ediyor, Cura’yı kapatmanız bu yazdırma işlemini durduracak. Emin misiniz?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Devam eden bir baskı var. Cura, önceki baskı tamamlanmadan USB aracılığıyla başka bir baskı işi başlatamaz."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Baskı Sürüyor"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura Profili"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Ağ ile Bağlan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Ultimaker hesabınızdan yeni yazıcı tespit edildi"
 msgstr[1] "Ultimaker hesabınızdan yeni yazıcılar tespit edildi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "{name} yazıcısı ({model}) hesabınızdan ekleniyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1362,71 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... ve {0} diğeri"
 msgstr[1] "... ve {0} diğeri"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Digital Factory'den eklenen yazıcılar:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Yazıcı için kullanılabilir bulut bağlantısı yok"
 msgstr[1] "Bazı yazıcılar için kullanılabilir bulut bağlantısı yok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Bu yazıcı Digital Factory ile bağlantılandırılmamış:"
 msgstr[1] "Bu yazıcılar Digital Factory ile bağlantılandırılmamış:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Bağlantı kurmak için lütfen {website_link} adresini ziyaret edin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Yazıcı yapılandırmalarını koru"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Yazıcıları kaldır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} yazıcısı bir sonraki hesap senkronizasyonuna kadar kaldırılacak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "{printer_name} yazıcısını kalıcı olarak kaldırmak için {digital_factory_link} adresini ziyaret edin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "{printer_name} yazıcısını geçici olarak kaldırmak istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Yazıcılar kaldırılsın mı?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1435,2164 +1103,2503 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "{0} yazıcıyı Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\nDevam etmek istediğinizden emin misiniz?"
-msgstr[1] "{0} yazıcıyı Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\nDevam etmek istediğinizden emin misiniz?"
+msgstr[0] ""
+"{0} yazıcıyı Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\n"
+"Devam etmek istediğinizden emin misiniz?"
+msgstr[1] ""
+"{0} yazıcıyı Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\n"
+"Devam etmek istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "Tüm yazıcıları Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\nDevam etmek istediğinizden emin misiniz?"
+msgstr ""
+"Tüm yazıcıları Cura'dan kaldırmak üzeresiniz. Bu işlem geri alınamaz.\n"
+"Devam etmek istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Ultimaker hesabınızı kullanarak yazdırma görevlerini dilediğiniz yerden gönderin ve görüntüleyin."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Bulut üzerinden yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Ultimaker Digital Factory'e Bağlan"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Bulut üzerinden yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Başlayın"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Bulut üzerinden bağlı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Baskı işi yüklenirken bilinmeyen hata kodu: {0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Ultimaker Connect çalıştırmayan bir yazıcıya bağlanmaya çalışıyorsunuz. Lütfen yazıcının donanım yazılımını son sürüme güncelleyin."
+msgid "tomorrow"
+msgstr "yarın"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Yazıcınızı güncelleyin"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "bugün"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura, henüz {0} grubunun ana yazıcısına yüklenmemiş malzeme profilleri tespit etti."
+msgid "Sending Print Job"
+msgstr "Yazdırma İşi Gönderiliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Malzemeler yazıcıya gönderiliyor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Baskı işi yazıcıya yükleniyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "{0} ile bağlantı kurmayı deniyorsunuz ancak cihaz bir grubun ana makinesi değil. Bu cihazı grup ana makinesi olarak yapılandırmak için web sayfasını ziyaret edebilirsiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Grup ana makinesi değil"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Grubu yapılandır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Ultimaker hesabınızı kullanarak yazdırma görevlerini dilediğiniz yerden gönderin ve görüntüleyin."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Ultimaker Digital Factory'e Bağlan"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Başlayın"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Mevcut iş gönderilene kadar bekleyin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Baskı hatası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Veri yazıcıya yüklenemedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Ağ hatası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Yazdırma İşi Gönderiliyor"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura, henüz {0} grubunun ana yazıcısına yüklenmemiş malzeme profilleri tespit etti."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Baskı işi yazıcıya yükleniyor."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Malzemeler yazıcıya gönderiliyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "Baskı işi kuyruğu dolu. Yazıcı yeni iş kabul edemez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Kuyruk Dolu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "Yazdırma işi yazıcıya başarıyla gönderildi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Veri Gönderildi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Ultimaker Connect çalıştırmayan bir yazıcıya bağlanmaya çalışıyorsunuz. Lütfen yazıcının donanım yazılımını son sürüme güncelleyin."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Yazıcınızı güncelleyin"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Ağ üzerinden yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Ağ üzerinden yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Ağ üzerinden bağlandı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Ağ ile Bağlan"
+msgid "Select upgrades"
+msgstr "Yükseltmeleri seçin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "yarın"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Yapı levhasını dengele"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "bugün"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Önerilen Ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB yazdırma"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Özel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "USB ile yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Proje dosyası <filename>{0}</filename> bilinmeyen bir makine tipi içeriyor: <message>{1}</message>. Makine alınamıyor. Bunun yerine modeller alınacak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "USB ile yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Proje Dosyası Aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "USB ile bağlı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "<filename>{0}</filename> proje dosyası aniden erişilemez oldu: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB’den yazdırma devam ediyor, Cura’yı kapatmanız bu yazdırma işlemini durduracak. Emin misiniz?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Proje Dosyası Açılamıyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Devam eden bir baskı var. Cura, önceki baskı tamamlanmadan USB aracılığıyla başka bir baskı işi başlatamaz."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Baskı Sürüyor"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "<filename>{0}</filename> proje dosyası, Ultimaker Cura'nın bu sürümünde bilinmeyen profiller kullanılarak yapılmış."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Dosyası"
+msgid "3MF File"
+msgstr "3MF Dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen Görüntüsü"
+msgid "Compressed G-code File"
+msgstr "Sıkıştırılmış G-code Dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "Bu yazdırmada bazı şeyler sorunlu olabilir. Ayarlama için ipuçlarını görmek için tıklayın."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter yazı modunu desteklemez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Proje Aç"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D Model Yardımcısı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Var olanları güncelleştir"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Model boyutu ve model yapılandırması nedeniyle bir veya daha fazla 3D model optimum yazdırılamayabilir:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>En iyi kalite ve güvenilirliği nasıl elde edeceğinizi öğrenin.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">Yazdırma kalitesi kılavuzunu görüntüleyin</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Yeni oluştur"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Güncelleme bilgilerine erişilemedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Özet - Cura Projesi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "{machine_name} cihazınız için yeni özellikler veya hata düzeltmeleri mevcut olabilir! Henüz son sürüme geçmediyseniz yazıcınızın donanım yazılımını {latest_version} sürümüne güncellemeniz önerilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Yazıcı ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Yeni %s bellenimi mevcut"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Makinedeki çakışma nasıl çözülmelidir?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Nasıl güncellenir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Tür"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G Dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Yazıcı Grubu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-code ayrıştırma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profil ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code Ayrıntıları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Dosya göndermeden önce g-code’un yazıcınız ve yazıcı yapılandırmanız için uygun olduğundan emin olun. G-code temsili doğru olmayabilir."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Destek Engelleyici"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Profildeki çakışma nasıl çözülmelidir?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Desteklerin yazdırılmadığı bir hacim oluşturun."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "İsim"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Profilde değil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 geçersiz kılma"
-msgstr[1] "%1 geçersiz kılmalar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Kaynağı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 geçersiz kılma"
-msgstr[1] "%1, %2 geçersiz kılmalar"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Malzeme ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Biçim Paketi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Malzemedeki çakışma nasıl çözülmelidir?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 profilleri"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Görünürlük ayarı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Hazırla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mod"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Görüntüle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Görünür ayarlar:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen Görüntüsü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "3mf dosyasını yazarken hata oluştu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Bir projenin yüklenmesi derleme levhasındaki tüm modelleri siler."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Aç"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura Projesi 3MF dosyası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Daha fazla seçenek görüntülemek ister misiniz?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF Writer eklentisi bozuk."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Şimdi Yedekle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Burada çalışma alanını yazmak için izin yok."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Otomatik Yedekle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "İşletim sistemi, proje dosyalarının bu konuma veya bu dosya adıyla kaydedilmesine izin vermiyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Cura’nın başlatıldığı günlerde otomatik olarak yedekleme yapar."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Önizleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Geri Yükle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Katman görünümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Yedeklemeyi Sil"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Kablo Yazdırma etkinleştirildiğinde Cura, katmanları doğru olarak görüntülemez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Bu yedeklemeyi silmek istediğinizden emin misiniz? Bu eylem geri alınamaz."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Simülasyon Görünümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Yedeklemeyi Geri Yükle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Önce dilimleme yapmanız gerektiğinden hiçbir şey gösterilmez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "Yedeklemeniz geri yüklenmeden öne Cura’yı yeniden başlatmalısınız. Cura’yı şimdi kapatmak istiyor musunuz?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Görüntülenecek katman yok"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura Sürümü"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Bu mesajı bir daha gösterme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Makineler"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Makine Ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Malzemeler"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Gerçek görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profiller"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Eklentiler"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura Yedeklemeleri"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Yedeklemelerim"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "UFP dosyasına yazamıyor:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Şu anda yedeklemeniz yok. Oluşturmak için “Şimdi Yedekle” düğmesini kullanın."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter metin dışı modu desteklemez."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Önizleme aşamasında en fazla 5 yedekleme görüntüleyebilirsiniz. Önceki yedeklemeleri görmek için mevcut yedeklemelerden birini kaldırın."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Lütfen dışa aktarmadan önce G-code'u hazırlayın."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Cura ayarlarınızı yedekleyin ve senkronize edin."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG Resmi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Giriş yap"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG Resmi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG Resmi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP Resmi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF Resmi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Yedeklemeniz geri yüklenirken bir hata oluştu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Yedeklemeler"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Yedeklemeniz yüklenirken bir hata oluştu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Yedeklemeniz oluşturuluyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Yedeklemeniz oluşturulurken bir hata oluştu."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Yedeklemeniz yükleniyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Yedeklemenizin yüklenmesi tamamlandı."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "Yedekleme maksimum dosya boyutunu aşıyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Yedeklemeleri yönet"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Aygıt Yazılımını Güncelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Aygıt yazılımı doğrudan 3B yazıcı üzerinden çalışan bir yazılım parçasıdır. Bu aygıt yazılımı adım motorlarını kontrol eder, sıcaklığı düzenler ve sonunda yazıcının çalışmasını sağlar."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "Yeni yazıcıları olan aygıt yazılımı gönderimi yararlı olmaktadır, ancak yeni sürümler daha fazla özellik ve geliştirmeye eğilimlidir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Aygıt Yazılımını otomatik olarak yükselt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Özel Aygıt Yazılımı Yükle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Yazıcı ile bağlantı kurulmadığı için aygıt yazılımı güncellenemiyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Yazıcı bağlantısı aygıt yazılımını yükseltmeyi desteklemediği için aygıt yazılımı güncellenemiyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Özel aygıt yazılımı seçin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Aygıt Yazılımı Güncellemesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "Aygıt yazılımı güncelleniyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Aygıt yazılımı güncellemesi tamamlandı."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Bilinmeyen bir hata nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Bir iletişim hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Bir girdi/çıktı hatası nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Eksik aygıt yazılımı nedeniyle aygıt yazılımı güncellemesi başarısız oldu."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Resim Dönüştürülüyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Mağaza"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "Her bir pikselin “Taban”dan en yüksek mesafesi."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "Paketi yüklemek için lisansı kabul etmeniz gerekir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Yükseklik (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Hesabınızda değişiklik var"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "Tabanın yapı levhasından milimetre cinsinden yüksekliği."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Kapat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Taban (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Sonraki"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "Yapı levhasındaki milimetre cinsinden genişlik."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "Aşağıdaki paketler eklenecek:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Genişlik (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "Aşağıdaki paketler uyumsuz Cura sürümü nedeniyle yüklenemiyor:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "Yapı levhasındaki milimetre cinsinden derinlik"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "Kaldırmayı onayla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Derinlik (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "Kullanımda olan materyalleri ve/veya profilleri kaldırıyorsunuz. Onay verirseniz aşağıdaki materyaller/profiller varsayılan değerlerine sıfırlanacaktır."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Litofanlar için, daha fazla ışığın girmesini engellemek amacıyla koyu renk pikseller daha kalın olan bölgelere denk gelmelidir. Yükseklik haritaları için daha açık renk pikseller daha yüksek araziyi ifade eder; bu nedenle daha açık renk piksellerin oluşturulan 3D modelde daha kalın bölgelere denk gelmesi gerekir."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Malzemeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Daha koyu olan daha yüksek"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Daha açık olan daha yüksek"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Onayla"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Litofanlar için yarı saydamlık sağlayacak basit bir logaritmik model bulunur. Yükseklik haritaları için piksel değerleri doğrusal yüksekliklere karşılık gelir."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Cura Paket veri tabanına bağlanılamadı. Lütfen bağlantınızı kontrol edin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Doğrusal"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Topluluk Katkıları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Yarı saydamlık"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Topluluk Eklentileri"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "1 milimetre kalınlığında bir baskıya nüfuz eden ışığın yüzdesi. Bu değerin düşürülmesi karanlık bölgelerdeki kontrastı arttırır ve görüntünün açık bölgelerindeki kontrastı azaltır."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Genel Materyaller"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 mm Geçirgenlik (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Sürüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "Resme uygulanacak düzeltme miktarı."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Son güncelleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Düzeltme"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Marka"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "Tamam"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "İndirmeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Yazıcı"
+msgid "Installed plugins"
+msgstr "Yüklü eklentiler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nozül Ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Hiç eklenti yüklenmedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Nozzle boyutu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Yüklü malzemeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Hiç malzeme yüklenmedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Uyumlu malzeme çapı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Paketli eklentiler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Nozül X ofseti"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Paketli malzemeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Nozül Y ofseti"
+msgid "Website"
+msgstr "Web sitesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Soğutma Fanı Numarası"
+msgid "Email"
+msgstr "E-posta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Ekstruder G-Code'u Başlatma"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Ultimaker Cura Enterprise için onaylı eklenti ve malzemeleri almak için lütfen oturum açın"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Ekstruder G-Code'u Sonlandırma"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Giriş yap"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Yazıcı Ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Paketler alınıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Genişlik)"
+msgid "Compatibility"
+msgstr "Uyumluluk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Derinlik)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Makine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Yükseklik)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Baskı tepsisi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Yapı levhası şekli"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Destek"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Merkez nokta"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Kalite"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Isıtılmış yatak"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Teknik Veri Sayfası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Isıtılmış yapı hacmi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Güvenlik Veri Sayfası"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code türü"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Yazdırma Talimatları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Yazıcı Başlığı Ayarları"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Web sitesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Eklentiler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Malzemeler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X maks"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Yüklü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y maks"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Web Mağazasına Git"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Portal Yüksekliği"
+msgid "Will install upon restarting"
+msgstr "Yeniden başlatıldığında kurulacak"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Ekstrüder Sayısı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Güncelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-code’u Başlat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Güncelleniyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-code’u Sonlandır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Güncellendi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Lütfen yazıcınızda bağlantı olduğundan emin olun:\n"
-"- Yazıcının açık olup olmadığını kontrol edin.\n"
-"- Yazıcının ağa bağlı olup olmadığını kontrol edin.\n"
-"- Buluta bağlı yazıcıları keşfetmek için giriş yapıp yapmadığınızı kontrol edin."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "Güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Eski Sürümü Yükle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "Kaldır"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Yüklü"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "Yükleme ve güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Malzeme makarası satın al</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Malzeme ara"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Lütfen yazıcınızı ağa bağlayın."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "Pakette değişikliklerin geçerli olması için Cura’yı yeniden başlatmalısınız."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Kullanım kılavuzlarını çevrimiçi olarak görüntüle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "%1 uygulamasından çık"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Geri"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Yükle"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Ağ Tipi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Normal model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Destek olarak yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Çakışma ayarlarını değiştir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Çakışmaları destekleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Yalnızca dolgu kafes"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Kesme Örgüsü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Ayarları seçin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Bu modeli Özelleştirmek için Ayarları seçin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filtrele..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Tümünü göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Son İşleme Uzantısı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Son İşleme Dosyaları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Dosya ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Etkin ileri işleme komut dosyalarını değiştirin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Aşağıdaki komut dosyası etkin:"
 msgstr[1] "Aşağıdaki komut dosyaları etkin:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Renk şeması"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Malzeme Rengi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Çizgi Tipi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Hız"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Katman kalınlığı"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Uyumluluk Modu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Geçişler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Yardımcılar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Kabuk"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Dolgu"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Yalnızca Üst Katmanları Göster"
+msgid "Queued"
+msgstr "Kuyrukta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "En Üstteki 5 Ayrıntılı Katmanı Göster"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Tarayıcıda yönet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Üst / Alt"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Kuyrukta baskı işi yok. Bir iş eklemek için dilimleme yapın ve gönderin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "İç Duvar"
+msgid "Print jobs"
+msgstr "Yazdırma görevleri"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min"
+msgid "Total print time"
+msgstr "Toplam yazdırma süresi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "maks"
+msgid "Waiting for"
+msgstr "Bekleniyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Anonim veri toplama hakkında daha fazla bilgi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Aşağıda, paylaşılan tüm verilerin bir örneği verilmiştir:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Anonim veri göndermek istemiyorum"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Anonim veri gönderilmesine izin ver"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Geri"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Uyumluluk"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Makine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Baskı tepsisi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Destek"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kalite"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Teknik Veri Sayfası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Güvenlik Veri Sayfası"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Yazdırma Talimatları"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Web sitesi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Yüklü"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "Yükleme ve güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Malzeme makarası satın al</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Güncelle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Güncelleniyor"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Güncellendi"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Web Mağazasına Git"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Malzeme ara"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "Pakette değişikliklerin geçerli olması için Cura’yı yeniden başlatmalısınız."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "%1 uygulamasından çık"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Eklentiler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Malzemeler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Yüklü"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Yeniden başlatıldığında kurulacak"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "Güncelleme yapabilmek için <a href='%1'>oturum açın</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Eski Sürümü Yükle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "Kaldır"
+msgid "Configuration Changes"
+msgstr "Yapılandırma Değişiklikleri"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Yükle"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Hesabınızda değişiklik var"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Kapat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Sonraki"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "Aşağıdaki paketler eklenecek:"
+msgid "Override"
+msgstr "Geçersiz kıl"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "Aşağıdaki paketler uyumsuz Cura sürümü nedeniyle yüklenemiyor:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "Kaldırmayı onayla"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "Kullanımda olan materyalleri ve/veya profilleri kaldırıyorsunuz. Onay verirseniz aşağıdaki materyaller/profiller varsayılan değerlerine sıfırlanacaktır."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Malzemeler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profiller"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Onayla"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Atanan yazıcı %1, şu yapılandırma değişikliğini gerektiriyor:"
+msgstr[1] "Atanan yazıcı %1, şu yapılandırma değişikliklerini gerektiriyor:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "Paketi yüklemek için lisansı kabul etmeniz gerekir"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "Yazıcı %1 atandı, fakat iş bilinmeyen bir malzeme yapılandırması içeriyor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Web sitesi"
+msgid "Change material %1 from %2 to %3."
+msgstr "%2 olan %1 malzemesini %3 yapın."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-posta"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "%3 malzemesini %1 malzemesi olarak yükleyin (Bu işlem geçersiz kılınamaz)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Sürüm"
+msgid "Change print core %1 from %2 to %3."
+msgstr "%2 olan %1 print core'u %3 yapın."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Son güncelleme"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Baskı tablasını %1 olarak değiştirin (Bu işlem geçersiz kılınamaz)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Marka"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Geçersiz kıl seçeneği mevcut yazıcı yapılandırmasındaki ayarları kullanacaktır. Yazdırma işlemi başarısız olabilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "İndirmeler"
+msgid "Glass"
+msgstr "Cam"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Topluluk Katkıları"
+msgid "Aluminum"
+msgstr "Alüminyum"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Topluluk Eklentileri"
+msgid "Unavailable printer"
+msgstr "Kullanım dışı yazıcı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Genel Materyaller"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Cura Paket veri tabanına bağlanılamadı. Lütfen bağlantınızı kontrol edin."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Yüklü eklentiler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Hiç eklenti yüklenmedi."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Yüklü malzemeler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Hiç malzeme yüklenmedi."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Paketli eklentiler"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Paketli malzemeler"
+msgid "First available"
+msgstr "İlk kullanılabilen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Paketler alınıyor..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Ultimaker Cura Enterprise için onaylı eklenti ve malzemeleri almak için lütfen oturum açın"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Mağaza"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Yapı Levhası Dengeleme"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Baskılarınızın düzgün çıktığından emin olmak için yapı levhanızı ayarlayabilirsiniz. “Sonraki Konuma Taşı” seçeneğine tıkladığınızda, nozül ayarlanabilen farklı konumlara taşınacak."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Her konum için nozülün altına bir kağıt yerleştirin ve yazdırma yapı levhasının yüksekliğini ayarlayın. Kağıt nozülün ucundan yavaşça geçerse yazdırma yapı levhasının yüksekliği doğrudur."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Yapı Levhasını Dengelemeyi Başlat"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Sonraki Konuma Taşı"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Lütfen Ultimaker Original’e yapılan herhangi bir yükseltmeyi seçin"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Isıtılmış Yapı Levhası (orijinal donanım veya şahsen yapılan)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Kuyruğu uzaktan yönetmek için lütfen yazıcının donanım yazılımını güncelleyin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Ağ Yazıcısına Bağlan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Yazıcınıza ağ üzerinden doğrudan baskı göndermek için lütfen yazıcınızın ağ kablosuyla ağa bağlı olduğundan veya yazıcınızı WiFi ağınıza bağladığınızdan emin olun. Yazıcınız ile Cura'ya bağlanamıyorsanız g-code dosyalarını yazıcınıza aktarmak için USB sürücüsü kullanabilirsiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Aşağıdaki listeden yazıcınızı seçin:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Düzenle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Kaldır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Yenile"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Yazıcınız listede yoksa <a href='%1'>ağ yazdırma sorun giderme kılavuzunu</a> okuyun"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Tür"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Üretici yazılımı sürümü"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Bu yazıcı, bir yazıcı grubunu barındırmak için ayarlı değildir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Bu yazıcı, %1 yazıcı grubunun ana makinesidir."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Bağlan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Geçersiz IP adresi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Lütfen geçerli bir IP adresi girin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Yazıcı Adresi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Ağdaki yazıcınızın IP adresini girin."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Yapılandırma Değişiklikleri"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Geçersiz kıl"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Atanan yazıcı %1, şu yapılandırma değişikliğini gerektiriyor:"
-msgstr[1] "Atanan yazıcı %1, şu yapılandırma değişikliklerini gerektiriyor:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "Yazıcı %1 atandı, fakat iş bilinmeyen bir malzeme yapılandırması içeriyor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "%2 olan %1 malzemesini %3 yapın."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "%3 malzemesini %1 malzemesi olarak yükleyin (Bu işlem geçersiz kılınamaz)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "%2 olan %1 print core'u %3 yapın."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Baskı tablasını %1 olarak değiştirin (Bu işlem geçersiz kılınamaz)."
+msgid "OK"
+msgstr "Tamam"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Geçersiz kıl seçeneği mevcut yazıcı yapılandırmasındaki ayarları kullanacaktır. Yazdırma işlemi başarısız olabilir."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Ağ üzerinden yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Cam"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alüminyum"
+msgid "Printer selection"
+msgstr "Yazıcı seçimi"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "En üste taşı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Sil"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Devam et"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Duraklatılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Devam ediliyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Duraklat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "İptal ediliyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Durdur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "%1 öğesini kuyruğun en üstüne taşımak ister misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Yazdırma işini en üste taşı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "%1 öğesini silmek istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Yazdırma işini sil"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1 öğesini durdurmak istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Yazdırmayı durdur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Durduruldu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Tamamlandı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Hazırlanıyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "İptal ediliyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Duraklatılıyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Duraklatıldı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Devam ediliyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Eylem gerekli"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "%1 bitiş tarihi: %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Yazıcıyı yönet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Kuyruğu uzaktan yönetmek için lütfen yazıcının donanım yazılımını güncelleyin."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Yükleniyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Mevcut değil"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Ulaşılamıyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Boşta"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Yazdırma"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Başlıksız"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anonim"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Yapılandırma değişiklikleri gerekiyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Detaylar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Kullanım dışı yazıcı"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Lütfen Ultimaker Original’e yapılan herhangi bir yükseltmeyi seçin"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "İlk kullanılabilen"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Isıtılmış Yapı Levhası (orijinal donanım veya şahsen yapılan)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Durduruldu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Yapı Levhası Dengeleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Tamamlandı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Baskılarınızın düzgün çıktığından emin olmak için yapı levhanızı ayarlayabilirsiniz. “Sonraki Konuma Taşı” seçeneğine tıkladığınızda, nozül ayarlanabilen farklı konumlara taşınacak."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Hazırlanıyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Her konum için nozülün altına bir kağıt yerleştirin ve yazdırma yapı levhasının yüksekliğini ayarlayın. Kağıt nozülün ucundan yavaşça geçerse yazdırma yapı levhasının yüksekliği doğrudur."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "İptal ediliyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Yapı Levhasını Dengelemeyi Başlat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Duraklatılıyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Sonraki Konuma Taşı"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Duraklatıldı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Proje Aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Devam ediliyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Var olanları güncelleştir"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Eylem gerekli"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Yeni oluştur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "%1 bitiş tarihi: %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Özet - Cura Projesi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Yazıcı ayarları"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Makinedeki çakışma nasıl çözülmelidir?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Tür"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Yazıcı Grubu"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profil ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Profildeki çakışma nasıl çözülmelidir?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "İsim"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Profilde değil"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 geçersiz kılma"
+msgstr[1] "%1 geçersiz kılmalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Kaynağı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 geçersiz kılma"
+msgstr[1] "%1, %2 geçersiz kılmalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Malzeme ayarları"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Malzemedeki çakışma nasıl çözülmelidir?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Görünürlük ayarı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mod"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Görünür ayarlar:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Bir projenin yüklenmesi derleme levhasındaki tüm modelleri siler."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Aç"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "Bu yazdırmada bazı şeyler sorunlu olabilir. Ayarlama için ipuçlarını görmek için tıklayın."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Lütfen yazıcınızda bağlantı olduğundan emin olun:\n"
+"- Yazıcının açık olup olmadığını kontrol edin.\n"
+"- Yazıcının ağa bağlı olup olmadığını kontrol edin.\n"
+"- Buluta bağlı yazıcıları keşfetmek için giriş yapıp yapmadığınızı kontrol edin."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Lütfen yazıcınızı ağa bağlayın."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Kullanım kılavuzlarını çevrimiçi olarak görüntüle"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Anonim veri toplama hakkında daha fazla bilgi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Aşağıda, paylaşılan tüm verilerin bir örneği verilmiştir:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Anonim veri göndermek istemiyorum"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Anonim veri gönderilmesine izin ver"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "Kuyrukta"
+msgid "Color scheme"
+msgstr "Renk şeması"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Tarayıcıda yönet"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Malzeme Rengi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Çizgi Tipi"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Hız"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Kuyrukta baskı işi yok. Bir iş eklemek için dilimleme yapın ve gönderin."
+msgid "Compatibility Mode"
+msgstr "Uyumluluk Modu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Yazdırma görevleri"
+msgid "Travels"
+msgstr "Geçişler"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Toplam yazdırma süresi"
+msgid "Helpers"
+msgstr "Yardımcılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Bekleniyor"
+msgid "Shell"
+msgstr "Kabuk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Ağ üzerinden yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Dolgu"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Yazıcı seçimi"
+msgid "Only Show Top Layers"
+msgstr "Yalnızca Üst Katmanları Göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Giriş yap"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "En Üstteki 5 Ayrıntılı Katmanı Göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "3D baskıya bağlı anahtarınız"
+msgid "Top / Bottom"
+msgstr "Üst / Alt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Daha fazla baskı profili ve eklenti ile deneyiminizi kişiselleştirin\n"
-"- Ayarlarınızı senkronize ederek ve dilediğiniz yerde yükleyerek esnek çalışın\n"
-"- Ultimaker yazıcılardaki uzaktan iş akışı sayesinde verimliliği artırın"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "İç Duvar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Hesap oluştur"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Kontrol ediliyor..."
+msgid "max"
+msgstr "maks"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nozül Ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Hesap senkronize edildi"
+msgid "Nozzle size"
+msgstr "Nozzle boyutu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Bir sorun oluştu..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Bekleyen güncellemeleri yükle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Uyumlu malzeme çapı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Hesap güncellemelerini kontrol et"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Nozül X ofseti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Son güncelleme: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Nozül Y ofseti"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker hesabı"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Soğutma Fanı Numarası"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Çıkış yap"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Ekstruder G-Code'u Başlatma"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Ekstruder G-Code'u Sonlandırma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Yazıcı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Yazıcı Ayarları"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Süre tahmini yok"
+msgid "X (Width)"
+msgstr "X (Genişlik)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Maliyet tahmini yok"
+msgid "Y (Depth)"
+msgstr "Y (Derinlik)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Önizleme"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Yükseklik)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Süre tahmini"
+msgid "Build plate shape"
+msgstr "Yapı levhası şekli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Malzeme tahmini"
+msgid "Origin at center"
+msgstr "Merkez nokta"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Isıtılmış yatak"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Isıtılmış yapı hacmi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Dilimleniyor..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code türü"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Dilimlenemedi"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Yazıcı Başlığı Ayarları"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X maks"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y maks"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Portal Yüksekliği"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Ekstrüder Sayısı"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-code’u Başlat"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-code’u Sonlandır"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Resim Dönüştürülüyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "Her bir pikselin “Taban”dan en yüksek mesafesi."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Yükseklik (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "Tabanın yapı levhasından milimetre cinsinden yüksekliği."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Taban (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "Yapı levhasındaki milimetre cinsinden genişlik."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Genişlik (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "Yapı levhasındaki milimetre cinsinden derinlik"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Derinlik (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Litofanlar için, daha fazla ışığın girmesini engellemek amacıyla koyu renk pikseller daha kalın olan bölgelere denk gelmelidir. Yükseklik haritaları için daha açık renk pikseller daha yüksek araziyi ifade eder; bu nedenle daha açık renk piksellerin oluşturulan 3D modelde daha kalın bölgelere denk gelmesi gerekir."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Daha koyu olan daha yüksek"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Daha açık olan daha yüksek"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Litofanlar için yarı saydamlık sağlayacak basit bir logaritmik model bulunur. Yükseklik haritaları için piksel değerleri doğrusal yüksekliklere karşılık gelir."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Doğrusal"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Yarı saydamlık"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "1 milimetre kalınlığında bir baskıya nüfuz eden ışığın yüzdesi. Bu değerin düşürülmesi karanlık bölgelerdeki kontrastı arttırır ve görüntünün açık bölgelerindeki kontrastı azaltır."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 mm Geçirgenlik (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "Resme uygulanacak düzeltme miktarı."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Düzeltme"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Yedeklemelerim"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Şu anda yedeklemeniz yok. Oluşturmak için “Şimdi Yedekle” düğmesini kullanın."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Önizleme aşamasında en fazla 5 yedekleme görüntüleyebilirsiniz. Önceki yedeklemeleri görmek için mevcut yedeklemelerden birini kaldırın."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Cura ayarlarınızı yedekleyin ve senkronize edin."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "İşleme"
+msgid "Want more?"
+msgstr "Daha fazla seçenek görüntülemek ister misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Dilimle"
+msgid "Backup Now"
+msgstr "Şimdi Yedekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Dilimleme sürecini başlat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Otomatik Yedekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Cura’nın başlatıldığı günlerde otomatik olarak yedekleme yapar."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura Sürümü"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Makineler"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Malzemeler"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profiller"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Eklentiler"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "İptal"
+msgid "Restore"
+msgstr "Geri Yükle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Çevrimiçi Sorun Giderme Kılavuzunu"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Yedeklemeyi Sil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Tam Ekrana Geç"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Bu yedeklemeyi silmek istediğinizden emin misiniz? Bu eylem geri alınamaz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Tam Ekrandan Çık"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Yedeklemeyi Geri Yükle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Geri Al"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "Yedeklemeniz geri yüklenmeden öne Cura’yı yeniden başlatmalısınız. Cura’yı şimdi kapatmak istiyor musunuz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Yinele"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura Yedeklemeleri"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Malzeme"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favoriler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Genel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Dosya"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Projeyi Kaydet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Dışa Aktar..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Çıkış"
+msgid "Export Selection..."
+msgstr "Seçimi Dışa Aktar..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3 Boyutlu Görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "En Son Öğeyi Aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Yapılandırma seç"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Yapılandırmalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Yapılandırmalar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Özel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Yazıcı"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Etkin"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Malzeme"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Bu malzeme kombinasyonuyla daha iyi yapıştırma için yapıştırıcı kullanın."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "%1 tanınmadığından bu yapılandırma kullanılamaz. Doğru malzeme profilini indirmek için lütfen %2 bölümünü ziyaret edin."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Mağaza"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Kullanılabilir yapılandırmalar yazıcıdan yükleniyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "Yazıcı bağlı olmadığından yapılandırmalar kullanılamıyor."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Görünüm"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Önden Görünüm"
+msgid "&Camera position"
+msgstr "&Kamera konumu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Yukarıdan Görünüm"
+msgid "Camera view"
+msgstr "Kamera görüşü"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Sol Taraftan Görünüm"
+msgid "Perspective"
+msgstr "Perspektif"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Sağ Taraftan Görünüm"
+msgid "Orthographic"
+msgstr "Ortografik"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura’yı yapılandır..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Yapı levhası"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Yazıcı Ekle..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Ağ etkin yazıcılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Yazıcıları Yönet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Yerel yazıcılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Malzemeleri Yönet..."
+msgid "Visible Settings"
+msgstr "Görünür ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Mağazadan daha fazla malzeme ekle"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "&Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
+msgid "Collapse All Categories"
+msgstr "Tüm Kategorileri Daralt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Geçerli değişiklikleri iptal et"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Ayar Görünürlüğünü Yönet..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "G&eçerli ayarlardan/geçersiz kılmalardan profil oluştur..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profilleri Yönet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Yazıcı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Çevrimiçi Belgeleri Göster"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Malzeme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Hata Bildir"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Etkin Ekstruder olarak ayarla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Yenilikler"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Ekstruderi Etkinleştir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Hakkında..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Ekstruderi Devre Dışı Bırak"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Seçili Modeli Sil"
-msgstr[1] "Seçili Modelleri Sil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Seçili Modeli Ortala"
-msgstr[1] "Seçili Modelleri Ortala"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Seçili Modeli Şununla Yazdır:"
+msgstr[1] "Seçili Modelleri Şununla Yazdır:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Seçili Modeli Çoğalt"
 msgstr[1] "Seçili Modelleri Çoğalt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Modeli Sil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Kopya Sayısı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Modeli Platformda Ortala"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Modelleri Gruplandır"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Özel profiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Model Grubunu Çöz"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Geçerli değişiklikleri iptal et"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Modelleri Birleştir"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Modeli Çoğalt..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n"
+"\n"
+"Profil yöneticisini açmak için tıklayın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Tüm modelleri Seç"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Açık"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Yapı Levhasını Temizle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Kapalı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Tüm Modelleri Yeniden Yükle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Deneysel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Tüm Modelleri Tüm Yapı Levhalarına Yerleştir"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Önerilen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Tüm Modelleri Düzenle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Özel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Seçimi Düzenle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Yazdırma ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Tüm Model Konumlarını Sıfırla"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "Yazıcı kurulumu devre dışı bırakıldı. G-code dosyası düzenlenemez."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Tüm Model ve Dönüşümleri Sıfırla"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Aşamalı dolgu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "&Dosya Aç..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Kademeli dolgu, yukarıya doğru dolgu miktarını kademeli olarak yükselecektir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Yeni Proje..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profiller"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Yapılandırma Klasörünü Göster"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "Bazı profil ayarlarını değiştirdiniz. Bunları değişiklikleri kaydetmek istiyorsanız, özel moda gidin."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Görünürlük ayarını yapılandır..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Destek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Mağazayı Göster"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Modellerin askıda kalan kısımlarını destekleyen yapılar oluşturun. Bu yapılar olmadan, yazdırma sırasında söz konusu kısımlar düşebilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Bu paket yeniden başlatmanın ardından kurulacak."
+msgid "Adhesion"
+msgstr "Yapıştırma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Genel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Bir kenar veya radye yazdırın. Bu nesnenizin etrafına veya altına daha sonra kesilmesi kolay olan düz bir alan sağlayacak."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Ayarlar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
+msgstr[1] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Yazıcılar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profiller"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Geçerli yazdırma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 kapatılıyor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "İşin Adı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "%1 uygulamasından çıkmak istediğinizden emin misiniz?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Yazdırma süresi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Kalan tahmini süre"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Dosya aç"
+msgid "Discard or Keep changes"
+msgstr "Değişiklikleri iptal et veya kaydet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Paketi Kur"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"Bazı profil ayarlarını özelleştirdiniz.\n"
+"Profiller arasında geçiş yapıldıktan sonra bu değişiklikleri tutmak ister misiniz?\n"
+"Alternatif olarak, '%1' üzerinden varsayılanları yüklemek için değişiklikleri silebilirsiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Dosya Aç"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profil ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla G-code dosyası bulduk. Tek seferde sadece bir G-code dosyası açabilirsiniz. Bir G-code dosyası açmak istiyorsanız, sadece birini seçiniz."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Mevcut değişiklikler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Yazıcı Ekle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Her zaman sor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Yenilikler"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "İptal et ve bir daha sorma"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Kaydet ve bir daha sorma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Değişiklikleri sil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Değişiklikleri tut"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "%1 hakkında"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "sürüm: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "Kaynaşık filaman 3B yazdırma için kalıcı çözüm."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3601,2000 +3608,2103 @@ msgstr ""
 "Cura, topluluk iş birliği ile Ultimaker B.V. tarafından geliştirilmiştir.\n"
 "Cura aşağıdaki açık kaynak projelerini gururla kullanmaktadır:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafik kullanıcı arayüzü"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Uygulama çerçevesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code oluşturucu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "İşlemler arası iletişim kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programlama dili"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI çerçevesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI çerçeve bağlantıları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C/C++ Bağlantı kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Veri değişim biçimi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Bilimsel bilgi işlem için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Daha hızlı matematik için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "STL dosyalarının işlenmesi için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Düzlemsel nesnelerin işlenmesi için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Üçgen birleşimlerin işlenmesi için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "3MF dosyalarının işlenmesi için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Dosya meta verileri ve akış için destek kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Seri iletişim kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf keşif kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Poligon kırpma kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python için statik tür denetleyicisi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSL güvenilirliğini doğrulamak için kök sertifikalar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python Hata takip kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research tarafından geliştirilen Poligon paketleme kitaplığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d için Python bağlamaları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Yazı tipi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG simgeleri"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux çapraz-dağıtım uygulama dağıtımı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Proje dosyası aç"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Bu bir Cura proje dosyasıdır. Bir proje olarak açmak mı yoksa içindeki modelleri içe aktarmak mı istiyorsunuz?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Seçimimi hatırla"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Proje olarak aç"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modelleri içe aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Değişiklikleri iptal et veya kaydet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "Bazı profil ayarlarını özelleştirdiniz.\nProfiller arasında geçiş yapıldıktan sonra bu değişiklikleri tutmak ister misiniz?\nAlternatif olarak, '%1' üzerinden"
-" varsayılanları yüklemek için değişiklikleri silebilirsiniz."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profil ayarları"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Mevcut değişiklikler"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Her zaman sor"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "İptal et ve bir daha sorma"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Kaydet ve bir daha sorma"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Değişiklikleri sil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Değişiklikleri tut"
+msgid "Open file(s)"
+msgstr "Dosya aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla proje dosyası bulduk. Tek seferde sadece bir proje dosyası açabilirsiniz. Sadece bu dosyalarda bulunan modelleri içe aktarmanızı öneririz. Devam etmek istiyor musunuz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Tümünü model olarak içe aktar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Projeyi Kaydet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Ekstruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & malzeme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Malzeme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Kaydederken proje özetini bir daha gösterme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Kaydet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Seçili Modeli %1 ile Yazdır"
-msgstr[1] "Seçili Modelleri %1 ile Yazdır"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Proje dosyası aç"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Bu bir Cura proje dosyasıdır. Bir proje olarak açmak mı yoksa içindeki modelleri içe aktarmak mı istiyorsunuz?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Seçimimi hatırla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Proje olarak aç"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modelleri içe aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Başlıksız"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Dosya"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Ultimaker Cura'ya hoş geldiniz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "Düz&enle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Başlayın"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Ayarlar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Boş"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "Uzantılar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Ultimaker Cura'yı geliştirmemiz yardım edin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Tercihler"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Bu veriler aşağıdakileri içerir:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Yardım"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Makine türleri"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Yeni proje"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Malzeme kullanımı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Yeni bir proje başlatmak istediğinizden emin misiniz? Bu işlem yapı levhasını ve kaydedilmemiş tüm ayarları silecektir."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Dilim sayısı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Mağaza"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Yazdırma ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Yapılandırmalar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura tarafından toplanan veriler herhangi bir kişisel bilgi içermeyecektir."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Daha fazla bilgi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "%1 tanınmadığından bu yapılandırma kullanılamaz. Doğru malzeme profilini indirmek için lütfen %2 bölümünü ziyaret edin."
+msgid "Add printer by IP address"
+msgstr "IP adresine göre bir yazıcı ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Yazıcınızın IP adresini girin."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Ekle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Mağaza"
+msgid "Could not connect to device."
+msgstr "Cihaza bağlanılamadı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Kullanılabilir yapılandırmalar yazıcıdan yükleniyor..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Ultimaker yazıcınıza bağlanamıyor musunuz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "Yazıcı bağlı olmadığından yapılandırmalar kullanılamıyor."
+msgid "The printer at this address has not responded yet."
+msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Yapılandırma seç"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Bu yazıcı bilinmeyen bir yazıcı olduğu veya bir grubun ana makinesi olmadığı için eklenemiyor."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Geri"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Bağlan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Yapılandırmalar"
+msgid "Add a printer"
+msgstr "Bir yazıcı ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Özel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Bir ağ yazıcısı ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Yazıcı"
+msgid "Add a non-networked printer"
+msgstr "Ağ dışı bir yazıcı ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Etkin"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Malzeme"
+msgid "Add a Cloud printer"
+msgstr "Bulut yazıcısı ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Bu malzeme kombinasyonuyla daha iyi yapıştırma için yapıştırıcı kullanın."
+msgid "Waiting for Cloud response"
+msgstr "Bulut yanıtı bekleniyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Seçili Modeli Şununla Yazdır:"
-msgstr[1] "Seçili Modelleri Şununla Yazdır:"
+msgid "No printers found in your account?"
+msgstr "Hesabınızda hiç yazıcı bulunamıyor mu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Seçili Modeli Çoğalt"
-msgstr[1] "Seçili Modelleri Çoğalt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "Hesabınızdaki şu yazıcılar Cura'ya eklendi:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Yazıcıyı manuel olarak ekle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Kopya Sayısı"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Projeyi Kaydet..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Dışa Aktar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Seçimi Dışa Aktar..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Malzeme"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favoriler"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Atla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Genel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Kullanıcı Anlaşması"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Ağ etkin yazıcılar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Reddet ve kapat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Yerel yazıcılar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "En Son Öğeyi Aç"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Ağınızda yazıcı bulunamadı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Yazıcı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Yenile"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Malzeme"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "IP'ye göre bir yazıcı ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Etkin Ekstruder olarak ayarla"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Bulut yazıcısı ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Ekstruderi Etkinleştir"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Sorun giderme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Ekstruderi Devre Dışı Bırak"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Üretici"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Profil sahibi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Yazıcı adı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Lütfen yazıcınızı adlandırın"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Son güncelleme: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker hesabı"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Çıkış yap"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Giriş yap"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Kontrol ediliyor..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Hesap senkronize edildi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Bir sorun oluştu..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Bekleyen güncellemeleri yükle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Hesap güncellemelerini kontrol et"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Nesne listesi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Görünür ayarlar"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Çevrimiçi Sorun Giderme Kılavuzunu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Tüm Kategorileri Daralt"
+msgid "Toggle Full Screen"
+msgstr "Tam Ekrana Geç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Ayar Görünürlüğünü Yönet..."
+msgid "Exit Full Screen"
+msgstr "Tam Ekrandan Çık"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Geri Al"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Yinele"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Çıkış"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kamera konumu"
+msgid "3D View"
+msgstr "3 Boyutlu Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kamera görüşü"
+msgid "Front View"
+msgstr "Önden Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektif"
+msgid "Top View"
+msgstr "Yukarıdan Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Ortografik"
+msgid "Left Side View"
+msgstr "Sol Taraftan Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Yapı levhası"
+msgid "Right Side View"
+msgstr "Sağ Taraftan Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Yazıcıya bağlı değil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura’yı yapılandır..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Yazıcı komutları kabul etmiyor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Yazıcı Ekle..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Bakımda. Lütfen yazıcıyı kontrol edin"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Yazıcıları Yönet..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Yazıcı bağlantısı koptu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Malzemeleri Yönet..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Yazdırılıyor..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Mağazadan daha fazla malzeme ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Duraklatıldı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "&Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Hazırlanıyor..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Geçerli değişiklikleri iptal et"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Lütfen yazıcıyı çıkarın"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "G&eçerli ayarlardan/geçersiz kılmalardan profil oluştur..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profilleri Yönet..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Çevrimiçi Belgeleri Göster"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Hata Bildir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Yenilikler"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Hakkında..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Modeli Sil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Modeli Platformda Ortala"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Modelleri Gruplandır"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Model Grubunu Çöz"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Modelleri Birleştir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Modeli Çoğalt..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Tüm modelleri Seç"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Yapı Levhasını Temizle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Tüm Modelleri Yeniden Yükle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Tüm Modelleri Tüm Yapı Levhalarına Yerleştir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Tüm Modelleri Düzenle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Seçimi Düzenle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Tüm Model Konumlarını Sıfırla"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Tüm Model ve Dönüşümleri Sıfırla"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "&Dosya Aç..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Yeni Proje..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Yapılandırma Klasörünü Göster"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Görünürlük ayarını yapılandır..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Mağazayı Göster"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Hesaplanmış"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Ayar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Geçerli"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Birim"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Bilgi"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Çap Değişikliğini Onayla"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Yeni filaman çapı %1 mm olarak ayarlandı ve bu değer, geçerli ekstrüder ile uyumlu değil. Devam etmek istiyor musunuz?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Yazdırmayı Durdur"
+msgid "Display Name"
+msgstr "Görünen Ad"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Yazdırmayı iptal etmek istediğinizden emin misiniz?"
+msgid "Material Type"
+msgstr "Malzeme Türü"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Destek olarak basıldı."
+msgid "Color"
+msgstr "Renk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Bu model ile çakışan diğer modeller değiştirilir."
+msgid "Properties"
+msgstr "Özellikler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "Bu model ile çakışan dolgu değiştirilir."
+msgid "Density"
+msgstr "Yoğunluk"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Bu model ile çakışmalar desteklenmez."
+msgid "Diameter"
+msgstr "Çap"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "%1 ayarı geçersiz kılar."
-msgstr[1] "%1 ayarı geçersiz kılar."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Filaman masrafı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Nesne listesi"
+msgid "Filament weight"
+msgstr "Filaman ağırlığı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Filaman uzunluğu"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Metre başına maliyet"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Bu malzeme %1’e bağlıdır ve özelliklerinden bazılarını paylaşır."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Malzemeyi Ayır"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Tanım"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Yapışma Bilgileri"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Etkinleştir"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Oluştur"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Çoğalt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "İçe Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Dışa Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Yazıcı"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Kaldırmayı Onayla"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "%1’i kaldırmak istediğinizden emin misiniz? Bu eylem geri alınamaz!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Malzemeyi İçe Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Malzeme <filename>%1</filename> dosyasına içe aktarılamadı: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla içe aktarıldı"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Malzemeyi Dışa Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Malzemenin <filename>%1</filename> dosyasına dışa aktarımı başarısız oldu: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla dışa aktarıldı"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Yazıcılar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Yeniden adlandır"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profiller"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Oluştur"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Çoğalt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil Oluştur"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Bu profil için lütfen bir ad girin."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profili Çoğalt"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profili Yeniden Adlandır"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profili İçe Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profili Dışa Aktar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Yazıcı: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Bu profil yazıcının belirlediği varsayılan ayarları kullanır; dolayısıyla aşağıdaki listede bulunan ayarları/geçersiz kılmaları içermez."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Geçerli ayarlarınız seçilen profille uyumlu."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Küresel Ayarlar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Görünürlüğü Ayarlama"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Tümünü denetle"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Genel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Arayüz"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Para Birimi:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Tema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "Bu değişikliklerinin geçerli olması için uygulamayı yeniden başlatmanız gerekecektir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Ayarlar değiştirilirken otomatik olarak dilimle."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Otomatik olarak dilimle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Görünüm şekli"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Modelin desteklenmeyen alanlarını kırmızı ile gösterin. Destek alınmadan bu alanlar düzgün bir şekilde yazdırılmayacaktır."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Dışarıda kalan alanı göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Modelin eksik veya ikincil yüzeylerini uyarı işaretleri kullanarak vurgulayın. Amaçlanan geometrinin eksik parçaları genellikle takım yolları olacaktır."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Model hatalarını görüntüle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Bir model seçildiğinde bu model görüntünün ortasında kalacak şekilde kamera hareket eder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Öğeyi seçince kamerayı ortalayın"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Cura’nın varsayılan yakınlaştırma davranışı tersine çevrilsin mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Kamera yakınlaştırma yönünü ters çevir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Yakınlaştırma farenin hareket yönüne uygun olsun mu?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Fareye doğru yakınlaştırma yapılması ortografik perspektifte desteklenmez."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Farenin hareket yönüne göre yakınlaştır"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Platformun üzerindeki öğeler kesişmemeleri için hareket ettirilmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Modellerin birbirinden ayrı olduğundan emin olduğundan emin olun"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Platformun üzerindeki modeller yapı levhasına değmeleri için indirilmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modelleri otomatik olarak yapı tahtasına indirin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "G-code okuyucuda uyarı mesajı göster."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code okuyucuda uyarı mesajı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Katman, uyumluluk moduna zorlansın mı?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Katman görünümünü uyumluluk moduna zorla (yeniden başlatma gerekir)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura kapatıldığı yerden mi başlatılsın?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Başlangıçtaki pencere konumuna dönülsün"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Ne tür bir kamera oluşturma işlemi kullanılmalıdır?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Kamera oluşturma:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspektif"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Ortografik"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Dosyaların açılması ve kaydedilmesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Masaüstünden veya harici uygulamalardan açılan dosyalar aynı Cura örneğinde mi açılacak?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Tek bir Cura örneği kullan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Modeller çok büyükse yapı hacmine göre ölçeklendirilmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Büyük modelleri ölçeklendirin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Bir modelin birimi milimetre değil de metre ise oldukça küçük görünebilir. Bu modeller ölçeklendirilmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Çok küçük modelleri ölçeklendirin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Yüklendikten sonra modeller seçilsin mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Yüklendiğinde modelleri seç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Yazıcı adına bağlı bir ön ek otomatik olarak yazdırma işinin adına eklenmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Makine ön ekini iş adına ekleyin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Bir proje dosyasını kaydederken özet gösterilmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Projeyi kaydederken özet iletişim kutusunu göster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Bir proje dosyası açıldığında varsayılan davranış"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Bir proje dosyası açıldığında varsayılan davranış: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Her zaman sor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Her zaman proje olarak aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Her zaman modelleri içe aktar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Bir profil üzerinde değişiklik yapıp farklı bir profile geçtiğinizde, değişikliklerin kaydedilmesini isteyip istemediğinizi soran bir iletişim kutusu açılır. Alternatif olarak bu işleve yönelik varsayılan bir davranış seçebilir ve bu iletişim kutusunun bir daha görüntülenmemesini tercih edebilirsiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profiller"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Farklı bir profile geçerken değişen ayar değerleriyle ilgili varsayılan davranış: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Değiştirilen ayarları her zaman at"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Değiştirilen ayarları her zaman yeni profile taşı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Gizlilik"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Cura, program başladığında güncellemeleri kontrol etmeli mi?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Başlangıçta güncellemeleri kontrol edin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Yazdırmanızdaki anonim veriler Ultimaker’a gönderilmeli mi? Unutmayın; hiçbir model, IP adresi veya diğer kişiye özgü bilgiler gönderilmez veya saklanmaz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonim) yazdırma bilgisi gönder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Daha fazla bilgi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Etkinleştir"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Yeniden adlandır"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Oluştur"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Çoğalt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "İçe Aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Dışa Aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Yazıcı"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Kaldırmayı Onayla"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "%1’i kaldırmak istediğinizden emin misiniz? Bu eylem geri alınamaz!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Malzemeyi İçe Aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Malzeme <filename>%1</filename> dosyasına içe aktarılamadı: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Görüntüleme tipi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla içe aktarıldı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Yazıcıya bağlı değil"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Malzemeyi Dışa Aktar"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Yazıcı komutları kabul etmiyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Malzemenin <filename>%1</filename> dosyasına dışa aktarımı başarısız oldu: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Bakımda. Lütfen yazıcıyı kontrol edin"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Malzeme <filename>%1</filename> dosyasına başarıyla dışa aktarıldı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Yazıcı bağlantısı koptu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Bilgi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Yazdırılıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Çap Değişikliğini Onayla"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Duraklatıldı"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Yeni filaman çapı %1 mm olarak ayarlandı ve bu değer, geçerli ekstrüder ile uyumlu değil. Devam etmek istiyor musunuz?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Hazırlanıyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Görünen Ad"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Lütfen yazıcıyı çıkarın"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Malzeme Türü"
+msgid "Abort Print"
+msgstr "Yazdırmayı Durdur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Renk"
+msgid "Are you sure you want to abort the print?"
+msgstr "Yazdırmayı iptal etmek istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Özellikler"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Arama ayarları"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Yoğunluk"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Değeri tüm ekstruderlere kopyala"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Çap"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Tüm değiştirilmiş değerleri tüm ekstruderlere kopyala"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Filaman masrafı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Bu ayarı gizle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Filaman ağırlığı"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Bu ayarı gösterme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Filaman uzunluğu"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Bu ayarı görünür yap"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Metre başına maliyet"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n"
+"\n"
+"Bu ayarları görmek için tıklayın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Bu malzeme %1’e bağlıdır ve özelliklerinden bazılarını paylaşır."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Etkilediği tüm ayarlar geçersiz kılındığı için bu ayar kullanılmamaktadır."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Malzemeyi Ayır"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Etkileri"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Tanım"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr ".........den etkilenir"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Yapışma Bilgileri"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Bu ayar her zaman, tüm ekstrüderler arasında paylaşılır. Buradan değiştirildiğinde tüm ekstrüderler için değer değiştirir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Yazdırma ayarları"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Bu ayar, çakışan ekstrüdere özgü değerlerden çözümlenir:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Oluştur"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Bu ayarın değeri profilden farklıdır.\n"
+"\n"
+"Profil değerini yenilemek için tıklayın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Çoğalt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil Oluştur"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Bu profil için lütfen bir ad girin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profili Çoğalt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profili Yeniden Adlandır"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profili İçe Aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profili Dışa Aktar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Yazıcı: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Profili geçerli ayarlar/geçersiz kılmalar ile güncelle"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Geçerli değişiklikleri iptal et"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Bu profil yazıcının belirlediği varsayılan ayarları kullanır; dolayısıyla aşağıdaki listede bulunan ayarları/geçersiz kılmaları içermez."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Geçerli ayarlarınız seçilen profille uyumlu."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Küresel Ayarlar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Hesaplanmış"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Ayar"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n"
+"\n"
+"Hesaplanan değeri yenilemek için tıklayın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3 Boyutlu Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Geçerli"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Önden Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Birim"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Yukarıdan Görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Görünürlüğü Ayarlama"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Sol görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Tümünü denetle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Sağ görünüm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Ekstrüder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "Sıcak ucun hedef sıcaklığı. Sıcak uç, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse sıcak uç ısıtma kapatılır."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "Bu sıcak ucun geçerli sıcaklığı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "Sıcak ucun ön ısıtma sıcaklığı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "İptal Et"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Ön ısıtma"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Yazdırma öncesinde sıcak ucu ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda sıcak ucun ısınmasını beklemeniz gerekmez."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "Bu ekstruderdeki malzemenin rengi."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Bu ekstruderdeki malzeme."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "Bu ekstrudere takılan nozül."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Yapı levhası"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "Isıtılmış yatağın hedef sıcaklığı. Yatak, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse yatak ısıtma kapatılır."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "Isıtılmış yatağın geçerli sıcaklığı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "Yatağın ön ısıtma sıcaklığı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Yazdırma öncesinde yatağı ısıt. Isıtma sırasında yazdırma işinizi ayarlamaya devam edebilirsiniz. Böylece yazdırmaya hazır olduğunuzda yatağın ısınmasını beklemeniz gerekmez."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Yazıcı kontrolü"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Jog Konumu"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Jog Mesafesi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-code Gönder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Bağlı yazıcıya özel bir G-code komutu gönderin. Komutu göndermek için 'enter' tuşuna basın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Yazıcı bağlı değil."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "Bulut yazıcısı çevrimdışı. Yazıcının açık ve internete bağlı olup olmadığını kontrol edin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Yazıcı hesabınızla bağlanmamış. Bağlantı kurmak için lütfen Ultimaker Digital Factory bölümünü ziyaret edin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "Bulut bağlantısı şu anda kullanılamıyor. Bulut yazıcısına bağlanmak için lütfen oturum açın."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "Bulut bağlantısı şu anda kullanılamıyor. Lütfen internet bağlantınızı kontrol edin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Yazıcı ekle"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Yazıcıları yönet"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Bağlı yazıcılar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Önayarlı yazıcılar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Geçerli yazdırma"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "İşin Adı"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Yazdırma süresi"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Kalan tahmini süre"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n"
-"\n"
-"Profil yöneticisini açmak için tıklayın."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Özel profiller"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
-msgstr[1] "%2 ekstrüderindeki yapılandırmalar için %1 profili yok. Bunun yerine varsayılan amaç kullanılacak"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "Yazıcı kurulumu devre dışı bırakıldı. G-code dosyası düzenlenemez."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Önerilen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Özel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Açık"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Kapalı"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Deneysel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Yapıştırma"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Bir kenar veya radye yazdırın. Bu nesnenizin etrafına veya altına daha sonra kesilmesi kolay olan düz bir alan sağlayacak."
+msgid "Is printed as support."
+msgstr "Destek olarak basıldı."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Aşamalı dolgu"
+msgid "Other models overlapping with this model are modified."
+msgstr "Bu model ile çakışan diğer modeller değiştirilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Kademeli dolgu, yukarıya doğru dolgu miktarını kademeli olarak yükselecektir."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Bazı profil ayarlarını değiştirdiniz. Bunları değişiklikleri kaydetmek istiyorsanız, özel moda gidin."
+msgid "Infill overlapping with this model is modified."
+msgstr "Bu model ile çakışan dolgu değiştirilir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Destek"
+msgid "Overlaps with this model are not supported."
+msgstr "Bu model ile çakışmalar desteklenmez."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Modellerin askıda kalan kısımlarını destekleyen yapılar oluşturun. Bu yapılar olmadan, yazdırma sırasında söz konusu kısımlar düşebilir."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "%1 ayarı geçersiz kılar."
+msgstr[1] "%1 ayarı geçersiz kılar."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n"
-"\n"
-"Bu ayarları görmek için tıklayın."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Mağaza"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Etkilediği tüm ayarlar geçersiz kılındığı için bu ayar kullanılmamaktadır."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "Düz&enle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Etkileri"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "Uzantılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr ".........den etkilenir"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Tercihler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Bu ayar her zaman, tüm ekstrüderler arasında paylaşılır. Buradan değiştirildiğinde tüm ekstrüderler için değer değiştirir."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Yardım"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Bu ayar, çakışan ekstrüdere özgü değerlerden çözümlenir:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Yeni proje"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Bu ayarın değeri profilden farklıdır.\n"
-"\n"
-"Profil değerini yenilemek için tıklayın."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Yeni bir proje başlatmak istediğinizden emin misiniz? Bu işlem yapı levhasını ve kaydedilmemiş tüm ayarları silecektir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n"
-"\n"
-"Hesaplanan değeri yenilemek için tıklayın."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Arama ayarları"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Değeri tüm ekstruderlere kopyala"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Tüm değiştirilmiş değerleri tüm ekstruderlere kopyala"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Bu ayarı gizle"
+msgid "This package will be installed after restarting."
+msgstr "Bu paket yeniden başlatmanın ardından kurulacak."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Bu ayarı gösterme"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Ayarlar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Bu ayarı görünür yap"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 kapatılıyor"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3 Boyutlu Görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "%1 uygulamasından çıkmak istediğinizden emin misiniz?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Önden Görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Paketi Kur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Yukarıdan Görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Dosya Aç"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Sol görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Seçtiğiniz dosyalar arasında bir veya daha fazla G-code dosyası bulduk. Tek seferde sadece bir G-code dosyası açabilirsiniz. Bir G-code dosyası açmak istiyorsanız, sadece birini seçiniz."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Sağ görünüm"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Yazıcı Ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Görüntüleme tipi"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Yenilikler"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Bulut yazıcısı ekle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "Bulut yazıcısı çevrimdışı. Yazıcının açık ve internete bağlı olup olmadığını kontrol edin."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Bulut yanıtı bekleniyor"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Yazıcı hesabınızla bağlanmamış. Bağlantı kurmak için lütfen Ultimaker Digital Factory bölümünü ziyaret edin."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Hesabınızda hiç yazıcı bulunamıyor mu?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "Bulut bağlantısı şu anda kullanılamıyor. Bulut yazıcısına bağlanmak için lütfen oturum açın."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "Hesabınızdaki şu yazıcılar Cura'ya eklendi:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "Bulut bağlantısı şu anda kullanılamıyor. Lütfen internet bağlantınızı kontrol edin."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Yazıcıyı manuel olarak ekle"
+msgid "Add printer"
+msgstr "Yazıcı ekle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Bitir"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Üretici"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Profil sahibi"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Yazıcı adı"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Lütfen yazıcınızı adlandırın"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Bir yazıcı ekleyin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Bir ağ yazıcısı ekleyin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Ağ dışı bir yazıcı ekleyin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Ağınızda yazıcı bulunamadı."
+msgid "Manage printers"
+msgstr "Yazıcıları yönet"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Yenile"
+msgid "Connected printers"
+msgstr "Bağlı yazıcılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "IP'ye göre bir yazıcı ekleyin"
+msgid "Preset printers"
+msgstr "Önayarlı yazıcılar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Bulut yazıcısı ekle"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Seçili Modeli %1 ile Yazdır"
+msgstr[1] "Seçili Modelleri %1 ile Yazdır"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Sorun giderme"
+msgid "Time estimation"
+msgstr "Süre tahmini"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "IP adresine göre bir yazıcı ekleyin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Yazıcınızın IP adresini girin."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Ekle"
+msgid "Material estimation"
+msgstr "Malzeme tahmini"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Cihaza bağlanılamadı."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Ultimaker yazıcınıza bağlanamıyor musunuz?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Bu adresteki yazıcı henüz yanıt vermedi."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Dilimleniyor..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Bu yazıcı bilinmeyen bir yazıcı olduğu veya bir grubun ana makinesi olmadığı için eklenemiyor."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Dilimlenemedi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Geri"
+msgid "Processing"
+msgstr "İşleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Bağlan"
+msgid "Slice"
+msgstr "Dilimle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker hesabı"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "3D baskıya bağlı anahtarınız"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Daha fazla baskı profili ve eklenti ile deneyiminizi kişiselleştirin"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Ayarlarınızı senkronize ederek ve dilediğiniz yerde yükleyerek esnek çalışın"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Ultimaker yazıcılardaki uzaktan iş akışı sayesinde verimliliği artırın"
+msgid "Start the slicing process"
+msgstr "Dilimleme sürecini başlat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Atla"
+msgid "Cancel"
+msgstr "İptal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Ultimaker Cura'yı geliştirmemiz yardım edin"
+msgid "No time estimation available"
+msgstr "Süre tahmini yok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura, yazdırma kalitesini ve kullanıcı deneyimini iyileştirmek için anonim veri toplar. Bu veriler aşağıdakileri içerir:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Maliyet tahmini yok"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Makine türleri"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Önizleme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Malzeme kullanımı"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Çıkarılabilir sürücünün takılıp çıkarılmasını ve yazma desteği sağlar."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Dilim sayısı"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Çıkarılabilir Sürücü Çıkış Cihazı Eklentisi"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Yazdırma ayarları"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Yapılandırmaları Cura 3.5’ten Cura 4.0’a yükseltir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura tarafından toplanan veriler herhangi bir kişisel bilgi içermeyecektir."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "3.5’ten 4.0’a Sürüm Yükseltme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Daha fazla bilgi"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Yapılandırmaları Cura 4.6.2'den Cura 4.7'ye yükseltir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Boş"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "4.6.2'den 4.7'ye Sürüm Yükseltme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Kullanıcı Anlaşması"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Yapılandırmaları Cura 2.2’den Cura 2.4’e yükseltir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Reddet ve kapat"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "2.2’den 2.4’e Sürüm Yükseltme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Ultimaker Cura'ya hoş geldiniz"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Yapılandırmaları Cura 4.2'den Cura 4.3'e yükseltir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Ultimaker Cura'yı kurmak\n"
-" için lütfen aşağıdaki adımları izleyin. Bu sadece birkaç saniye sürecektir."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "4.2'den 4.3'e Sürüm Yükseltme"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Başlayın"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Yapılandırmaları Cura 4.6.0'dan Cura 4.6.2'ye yükseltir."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura'daki yenilikler"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "4.6.0'dan 4.6.2'ye Sürüm Yükseltme"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Olası yazdırma sorunlarına karşı modelleri ve yazdırma yapılandırmasını kontrol eder ve öneriler verir."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Yapılandırmaları Cura 3.0'dan Cura 3.1'e yükseltir."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Model Kontrol Edici"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "3.0'dan 3.1'e Sürüm Yükseltme"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "3MF dosyalarının okunması için destek sağlar."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Yapılandırmaları Cura 4.0’dan Cura 4.1’e yükseltir."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF Okuyucu"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "4.0’dan 4.1’e Sürüm Yükseltme"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "3MF dosyalarının yazılması için destek sağlar."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Yapılandırmaları Cura 2.6’dan Cura 2.7’ye yükseltir."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF Yazıcı"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "2.6’dan 2.7’ye Sürüm Yükseltme"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "AMF dosyalarının okunması için destek sağlar."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Yapılandırmaları Cura 2.5’ten Cura 2.6’ya yükseltir."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF Okuyucu"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "2.5’ten 2.6’ya Sürüm Yükseltme"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Yapılandırmanızı yedekleyin ve geri yükleyin."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Yapılandırmaları Cura 4.1'den Cura 4.2'ye yükseltir."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura Yedeklemeleri"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Sürüm 4.1'den 4.2'ye Yükseltme"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "CuraEngine arka dilimleme ucuna bağlantı sağlar."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Yapılandırmaları Cura 2.1’den Cura 2.2’ye yükseltir."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine Arka Uç"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "2.1’den 2.2’ye Sürüm Yükseltme"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Cura profillerinin içe aktarılması için destek sağlar."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Yapılandırmaları Cura 3.2’ten Cura 3.3’ya yükseltir."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura Profil Okuyucu"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "3.2'dan 3.3'e Sürüm Yükseltme"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Cura profillerinin dışa aktarılması için destek sağlar."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Yapılandırmaları Cura 4.5'ten Cura 4.6'ya yükseltir."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura Profili Yazıcı"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "4.5'ten 4.6'ya Sürüm Yükseltme"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Bellenim güncellemelerini denetler."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Yapılandırmaları Cura 4.4'ten Cura 4.5'e yükseltir."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Bellenim Güncelleme Denetleyicisi"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "4.4'ten 4.5'e Sürüm Yükseltme"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Aygıt yazılımını güncellemeye yönelik makine eylemleri sağlar."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Yapılandırmaları Cura 4.7'den Cura 4.8'e yükseltir."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Aygıt Yazılımı Güncelleyici"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "4.7'den 4.8'e Sürüm Yükseltme"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Bir sıkıştırılmış arşivden g-code okur."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Yapılandırmaları Cura 3.3’ten Cura 3.4’ya yükseltir."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Sıkıştırılmış G-code Okuyucusu"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "3.3'dan 3.4'e Sürüm Yükseltme"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-code’u bir sıkıştırılmış arşive yazar."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Yapılandırmaları Cura 4.3'ten Cura 4.4'e yükseltir."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Sıkıştırılmış G-code Yazıcısı"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "4.3'ten 4.4'e Sürüm Yükseltme"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "G-code dosyalarından profilleri içe aktarmak için destek sağlar."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Yapılandırmaları Cura 3.4’ten Cura 3.5’e yükseltir."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code Profil Okuyucu"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "3.4’ten 3.5’e Sürüm Yükseltme"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "G-code dosyalarının yüklenmesine ve görüntülenmesine olanak tanır."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Yapılandırmaları Cura 2.7’den Cura 3.0’a yükseltir."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code Okuyucu"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "2.7’den 3.0’a Sürüm Yükseltme"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "G-code’u bir dosyaya yazar."
+msgid "Provides support for reading AMF files."
+msgstr "AMF dosyalarının okunması için destek sağlar."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code Yazıcı"
+msgid "AMF Reader"
+msgstr "AMF Okuyucu"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "2D resim dosyasından yazdırılabilir geometri oluşturulmasını sağlar."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "G-code dosyalarından profilleri içe aktarmak için destek sağlar."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Resim Okuyucu"
+msgid "G-code Profile Reader"
+msgstr "G-code Profil Okuyucu"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Eski Cura sürümlerinden profilleri içe aktarmak için destek sağlar."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Aygıt yazılımını güncellemeye yönelik makine eylemleri sağlar."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Eski Cura Profil Okuyucu"
+msgid "Firmware Updater"
+msgstr "Aygıt Yazılımı Güncelleyici"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Makine ayarlarının değiştirilmesini sağlar (yapı hacmi, nozül boyutu vb.)"
+msgid "Provides support for reading X3D files."
+msgstr "X3D dosyalarının okunması için destek sağlar."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Makine Ayarları eylemi"
+msgid "X3D Reader"
+msgstr "X3D Okuyucu"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Cura’da görüntüleme aşaması sunar."
+msgid "Find, manage and install new Cura packages."
+msgstr "Yeni Cura paketleri bulun, yönetin ve kurun."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Görüntüleme Aşaması"
+msgid "Toolbox"
+msgstr "Araç kutusu"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5616,75 +5726,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Son İşleme"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Cura’da hazırlık aşaması sunar."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "CuraEngine arka dilimleme ucuna bağlantı sağlar."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Hazırlık Aşaması"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine Arka Uç"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Cura’da ön izleme aşaması sunar."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "G-Code’ları kabul eder ve bir yazıcıya gönderir. Eklenti aynı zamanda üretici sürümünü güncelleyebilir."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Öz İzleme Aşaması"
+msgid "USB printing"
+msgstr "USB yazdırma"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Çıkarılabilir sürücünün takılıp çıkarılmasını ve yazma desteği sağlar."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Cura profillerinin dışa aktarılması için destek sağlar."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Çıkarılabilir Sürücü Çıkış Cihazı Eklentisi"
+msgid "Cura Profile Writer"
+msgstr "Cura Profili Yazıcı"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Çökme raporlayıcının kullanabilmesi için belirli olayları günlüğe kaydeder"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Ultimaker ağındaki yazıcılar için ağ bağlantılarını yönetir."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Nöbetçi Günlükçü"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker Ağ Bağlantısı"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Simülasyon görünümünü sunar."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Ultimaker makineleri için makine eylemleri sunar (yatak dengeleme sihirbazı, yükseltme seçme vb.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simülasyon Görünümü"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker makine eylemleri"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Anonim dilim bilgisi gönderir. Tercihlerden devre dışı bırakılabilir."
+msgid "Provides support for reading 3MF files."
+msgstr "3MF dosyalarının okunması için destek sağlar."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Dilim bilgisi"
+msgid "3MF Reader"
+msgstr "3MF Okuyucu"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Normal gerçek bir ağ görünümü sağlar."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-code’u bir sıkıştırılmış arşive yazar."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Gerçek Görünüm"
+msgid "Compressed G-code Writer"
+msgstr "Sıkıştırılmış G-code Yazıcısı"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Bir sıkıştırılmış arşivden g-code okur."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Sıkıştırılmış G-code Okuyucusu"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Olası yazdırma sorunlarına karşı modelleri ve yazdırma yapılandırmasını kontrol eder ve öneriler verir."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Model Kontrol Edici"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Bellenim güncellemelerini denetler."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Bellenim Güncelleme Denetleyicisi"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "G-code dosyalarının yüklenmesine ve görüntülenmesine olanak tanır."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-code Okuyucu"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5696,16 +5846,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Destek Silici"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Yeni Cura paketleri bulun, yönetin ve kurun."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Araç kutusu"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5716,6 +5856,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh Okuyucu"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Çökme raporlayıcının kullanabilmesi için belirli olayları günlüğe kaydeder"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Nöbetçi Günlükçü"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5726,265 +5876,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP Okuyucu"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Ultimaker Biçim Paketleri yazmak için destek sağlar."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UPF Yazıcı"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Ultimaker makineleri için makine eylemleri sunar (yatak dengeleme sihirbazı, yükseltme seçme vb.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Eski Cura sürümlerinden profilleri içe aktarmak için destek sağlar."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker makine eylemleri"
+msgid "Legacy Cura Profile Reader"
+msgstr "Eski Cura Profil Okuyucu"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Ultimaker ağındaki yazıcılar için ağ bağlantılarını yönetir."
+msgid "Provides a prepare stage in Cura."
+msgstr "Cura’da hazırlık aşaması sunar."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker Ağ Bağlantısı"
+msgid "Prepare Stage"
+msgstr "Hazırlık Aşaması"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "G-Code’ları kabul eder ve bir yazıcıya gönderir. Eklenti aynı zamanda üretici sürümünü güncelleyebilir."
+msgid "Provides a monitor stage in Cura."
+msgstr "Cura’da görüntüleme aşaması sunar."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB yazdırma"
+msgid "Monitor Stage"
+msgstr "Görüntüleme Aşaması"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Yapılandırmaları Cura 2.1’den Cura 2.2’ye yükseltir."
+msgid "Provides the X-Ray view."
+msgstr "Röntgen Görüntüsü sağlar."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "2.1’den 2.2’ye Sürüm Yükseltme"
+msgid "X-Ray View"
+msgstr "Röntgen Görüntüsü"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Yapılandırmaları Cura 2.2’den Cura 2.4’e yükseltir."
+msgid "Provides support for writing 3MF files."
+msgstr "3MF dosyalarının yazılması için destek sağlar."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "2.2’den 2.4’e Sürüm Yükseltme"
+msgid "3MF Writer"
+msgstr "3MF Yazıcı"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Yapılandırmaları Cura 2.5’ten Cura 2.6’ya yükseltir."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Anonim dilim bilgisi gönderir. Tercihlerden devre dışı bırakılabilir."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "2.5’ten 2.6’ya Sürüm Yükseltme"
+msgid "Slice info"
+msgstr "Dilim bilgisi"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Yapılandırmaları Cura 2.6’dan Cura 2.7’ye yükseltir."
+msgid "Provides a preview stage in Cura."
+msgstr "Cura’da ön izleme aşaması sunar."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "2.6’dan 2.7’ye Sürüm Yükseltme"
+msgid "Preview Stage"
+msgstr "Öz İzleme Aşaması"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Yapılandırmaları Cura 2.7’den Cura 3.0’a yükseltir."
+msgid "Provides the Simulation view."
+msgstr "Simülasyon görünümünü sunar."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "2.7’den 3.0’a Sürüm Yükseltme"
+msgid "Simulation View"
+msgstr "Simülasyon Görünümü"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Yapılandırmaları Cura 3.0'dan Cura 3.1'e yükseltir."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Makine ayarlarının değiştirilmesini sağlar (yapı hacmi, nozül boyutu vb.)"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "3.0'dan 3.1'e Sürüm Yükseltme"
+msgid "Machine Settings Action"
+msgstr "Makine Ayarları eylemi"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Yapılandırmaları Cura 3.2’ten Cura 3.3’ya yükseltir."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "XML tabanlı malzeme profillerini okuma ve yazma olanağı sağlar."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "3.2'dan 3.3'e Sürüm Yükseltme"
+msgid "Material Profiles"
+msgstr "Malzeme Profilleri"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Yapılandırmaları Cura 3.3’ten Cura 3.4’ya yükseltir."
+msgid "Provides a normal solid mesh view."
+msgstr "Normal gerçek bir ağ görünümü sağlar."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "3.3'dan 3.4'e Sürüm Yükseltme"
+msgid "Solid View"
+msgstr "Gerçek Görünüm"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Yapılandırmaları Cura 3.4’ten Cura 3.5’e yükseltir."
+msgid "Provides support for importing Cura profiles."
+msgstr "Cura profillerinin içe aktarılması için destek sağlar."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "3.4’ten 3.5’e Sürüm Yükseltme"
+msgid "Cura Profile Reader"
+msgstr "Cura Profil Okuyucu"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Yapılandırmaları Cura 3.5’ten Cura 4.0’a yükseltir."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Ultimaker Biçim Paketleri yazmak için destek sağlar."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "3.5’ten 4.0’a Sürüm Yükseltme"
+msgid "UFP Writer"
+msgstr "UPF Yazıcı"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Yapılandırmaları Cura 4.0’dan Cura 4.1’e yükseltir."
+msgid "Writes g-code to a file."
+msgstr "G-code’u bir dosyaya yazar."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "4.0’dan 4.1’e Sürüm Yükseltme"
+msgid "G-code Writer"
+msgstr "G-code Yazıcı"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Yapılandırmaları Cura 4.1'den Cura 4.2'ye yükseltir."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "2D resim dosyasından yazdırılabilir geometri oluşturulmasını sağlar."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Sürüm 4.1'den 4.2'ye Yükseltme"
+msgid "Image Reader"
+msgstr "Resim Okuyucu"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Yapılandırmaları Cura 4.2'den Cura 4.3'e yükseltir."
+msgid "Backup and restore your configuration."
+msgstr "Yapılandırmanızı yedekleyin ve geri yükleyin."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "4.2'den 4.3'e Sürüm Yükseltme"
+msgid "Cura Backups"
+msgstr "Cura Yedeklemeleri"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Yapılandırmaları Cura 4.3'ten Cura 4.4'e yükseltir."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Genel yığın eksik."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "4.3'ten 4.4'e Sürüm Yükseltme"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Modeliniz çok katmanlı değil. Vurgulanan alanlar eksik ya da ikincil yüzeyleri gösterir."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Yapılandırmaları Cura 4.4'ten Cura 4.5'e yükseltir."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Model hataları"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "4.4'ten 4.5'e Sürüm Yükseltme"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Katman kalınlığı"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Yapılandırmaları Cura 4.5'ten Cura 4.6'ya yükseltir."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "3D baskıya bağlı anahtarınız"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "4.5'ten 4.6'ya Sürüm Yükseltme"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Daha fazla baskı profili ve eklenti ile deneyiminizi kişiselleştirin\n"
+#~ "- Ayarlarınızı senkronize ederek ve dilediğiniz yerde yükleyerek esnek çalışın\n"
+#~ "- Ultimaker yazıcılardaki uzaktan iş akışı sayesinde verimliliği artırın"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Yapılandırmaları Cura 4.6.0'dan Cura 4.6.2'ye yükseltir."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Hesap oluştur"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "4.6.0'dan 4.6.2'ye Sürüm Yükseltme"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Seçili Modeli Sil"
+#~ msgstr[1] "Seçili Modelleri Sil"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Yapılandırmaları Cura 4.6.2'den Cura 4.7'ye yükseltir."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Seçili Modeli Ortala"
+#~ msgstr[1] "Seçili Modelleri Ortala"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "4.6.2'den 4.7'ye Sürüm Yükseltme"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Seçili Modeli Çoğalt"
+#~ msgstr[1] "Seçili Modelleri Çoğalt"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Yapılandırmaları Cura 4.7'den Cura 4.8'e yükseltir."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Bitir"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "4.7'den 4.8'e Sürüm Yükseltme"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker hesabı"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "X3D dosyalarının okunması için destek sağlar."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "3D baskıya bağlı anahtarınız"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D Okuyucu"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Daha fazla baskı profili ve eklenti ile deneyiminizi kişiselleştirin"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "XML tabanlı malzeme profillerini okuma ve yazma olanağı sağlar."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Ayarlarınızı senkronize ederek ve dilediğiniz yerde yükleyerek esnek çalışın"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Malzeme Profilleri"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Ultimaker yazıcılardaki uzaktan iş akışı sayesinde verimliliği artırın"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Röntgen Görüntüsü sağlar."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Ultimaker Cura'yı kurmak\n"
+#~ " için lütfen aşağıdaki adımları izleyin. Bu sadece birkaç saniye sürecektir."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen Görüntüsü"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Ultimaker Cura'daki yenilikler"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/tr_TR/fdmextruder.def.json.po b/resources/i18n/tr_TR/fdmextruder.def.json.po
index bebcfb8ba0..2dabff9f2b 100644
--- a/resources/i18n/tr_TR/fdmextruder.def.json.po
+++ b/resources/i18n/tr_TR/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Turkish\n"
diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po
index 81a5ad1f72..2209f04438 100644
--- a/resources/i18n/tr_TR/fdmprinter.def.json.po
+++ b/resources/i18n/tr_TR/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Turkish <info@lionbridge.com>, Turkish <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Ekstrüderlerin tek bir ısıtıcıyı mı paylaşacağı yoksa her bir ekstrüderin kendi ısıtıcısı mı olacağı."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "İzin Verilmeyen Alanlar"
@@ -486,8 +506,8 @@ msgstr "Ekstruder Ofseti"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Ekstruder ofsetini koordinat sistemine uygulayın."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "İlk katman üzerinde bulunan hat genişliği çoğaltıcı. Çoğaltmay
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Kovan"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Z dikişini daha iyi gizlemek için dış duvardan sonra eklenen hareket mesafesi."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Üst Yüzey Ekstruderi"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "En üstteki yüzeyi yazdırmak için kullanılan ekstruder dişli çarkı. Çoklu ekstrüzyon işlemi için kullanılır."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Üst Yüzey Katmanları"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "En üstteki yüzey katmanlarının sayısı. Yüksek kalitede üst yüzeyler oluşturmak için genellikle tek bir üst yüzey katmanı yeterlidir."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Üst/Alt Ekstruderi"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "Üst ve alt yüzeyi yazdırmak için kullanılan ekstruder dişli çarkı. Çoklu ekstrüzyon işlemi için kullanılır."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Üst/Alt Kalınlık"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "Yazdırmadaki üst/alt katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer üst/alt katmanların sayısını belirtir."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Üst Kalınlık"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "Yazdırmadaki üst katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer üst katmanların sayısını belirtir."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Üst Katmanlar"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Üst katman sayısı. Bu değer, üst kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Alt Kalınlık"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "Yazdırmadaki alt katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer alt katmanların sayısını belirtir."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Alt katmanlar"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Alt katman sayısı. Bu değer, alt kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "İlk Alt Katmanlar"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Yapı plakasından itibaren ilk alt katman sayısı Bu değer, alt kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Üst/Alt Şekil"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Üst/alt katmanların şekli."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Çizgiler"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Eş merkezli"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zik Zak"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Alt Şekil İlk Katmanı"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Yazdırmanın altında ilk katmanda yer alacak şekil."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Çizgiler"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Eş merkezli"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zikzak"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Üst/Alt Poligonları Bağla"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Üst/alt yüzey yollarını yan yana ise bağla. Eş merkezli şekil için bu ayarı etkinleştirmek, hareket süresini önemli ölçüde kısaltır ancak bağlantılar dolgunun üzerinde meydana gelebileceğinden bu özellik üst yüzeyin kalitesini düşürebilir."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Üst/Alt Çizgi Yönleri"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Üst/alt katmanlar çizgi veya zikzak şekillerini kullandığında kullanılacak tam sayı çizgi yönü listesi. Listedeki öğeler, katmanlar ilerledikçe sıralı olarak kullanılır. Listenin sonuna ulaşıldığında baştan başlanır. Liste öğeleri virgülle ayrılır ve tüm liste köşeli parantez içine alınır. Varsayılan ayar boş listedir ve geleneksel varsayılan açılar (45 ve 135 derece) kullanılır."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Dış Duvar İlavesi"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Etkin olduğunda, z dikişi koordinatları her parçanın merkezine göre hizalıdır. Devre dışı olduğunda, koordinatlar yapı levhası üzerinde mutlak bir pozisyonu belirtir."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Üst Yüzey Ekstruderi"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "En üstteki yüzeyi yazdırmak için kullanılan ekstruder dişli çarkı. Çoklu ekstrüzyon işlemi için kullanılır."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Üst Yüzey Katmanları"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "En üstteki yüzey katmanlarının sayısı. Yüksek kalitede üst yüzeyler oluşturmak için genellikle tek bir üst yüzey katmanı yeterlidir."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Üst/Alt Ekstruderi"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "Üst ve alt yüzeyi yazdırmak için kullanılan ekstruder dişli çarkı. Çoklu ekstrüzyon işlemi için kullanılır."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Üst/Alt Kalınlık"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "Yazdırmadaki üst/alt katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer üst/alt katmanların sayısını belirtir."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Üst Kalınlık"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "Yazdırmadaki üst katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer üst katmanların sayısını belirtir."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Üst Katmanlar"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Üst katman sayısı. Bu değer, üst kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Alt Kalınlık"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "Yazdırmadaki alt katmanların kalınlığı. Katman yüksekliğiyle ayrılan bu değer alt katmanların sayısını belirtir."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Alt katmanlar"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Alt katman sayısı. Bu değer, alt kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "İlk Alt Katmanlar"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Yapı plakasından itibaren ilk alt katman sayısı Bu değer, alt kalınlığıyla hesaplandığında tam sayıya yuvarlanır."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Üst/Alt Şekil"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Üst/alt katmanların şekli."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Çizgiler"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Eş merkezli"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zik Zak"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Alt Şekil İlk Katmanı"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Yazdırmanın altında ilk katmanda yer alacak şekil."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Çizgiler"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Eş merkezli"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zikzak"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Üst/Alt Poligonları Bağla"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Üst/alt yüzey yollarını yan yana ise bağla. Eş merkezli şekil için bu ayarı etkinleştirmek, hareket süresini önemli ölçüde kısaltır ancak bağlantılar dolgunun üzerinde meydana gelebileceğinden bu özellik üst yüzeyin kalitesini düşürebilir."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Üst/Alt Çizgi Yönleri"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Üst/alt katmanlar çizgi veya zikzak şekillerini kullandığında kullanılacak tam sayı çizgi yönü listesi. Listedeki öğeler, katmanlar ilerledikçe sıralı olarak kullanılır. Listenin sonuna ulaşıldığında baştan başlanır. Liste öğeleri virgülle ayrılır ve tüm liste köşeli parantez içine alınır. Varsayılan ayar boş listedir ve geleneksel varsayılan açılar (45 ve 135 derece) kullanılır."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Z Boşluklarında Dış Katman Oluşturma"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Duvarlar ile yüzey ekseni (uçları) arasındaki çakışma miktarını ayarlayın. Az miktar çakışma duvarların yüzeye sıkıca bağlanmasını sağlar. Eşit yüzey ve duvar hattı genişliği söz konusu olduğunda, duvar kalınlığının yarısından fazla değerlerde bu noktada yüzey ekstrüderinin nozül konumu halihazırda duvarın ortasına ulaşmış olacağından yüzeyin duvarı geçmiş olabileceğini unutmayın."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Yüzey Kaldırma Genişliği"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "Kaldırılacak olan yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt/üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Üst Yüzey Kaldırma Genişliği"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "Kaldırılacak olan üst yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Alt Yüzey Kaldırma Genişliği"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "Kaldırılacak olan alt yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Yüzey Genişleme Mesafesi"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "Yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi komşu katmanlardaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Üst Yüzey Genişleme Mesafesi"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "Üst yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yukarıdaki katmandaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Alt Yüzey Genişleme Mesafesi"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "Alt yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yüzeyin aşağıdaki katmandaki duvara daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Genişleme için Maksimum Yüzey Açısı"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Genişleme için Minimum Yüzey Genişliği"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Bu değerden daha dar olan yüzey alanları genişletilmez. Böylece model yüzeyinin dikeye yakın bir eğime sahip olduğu durumlarda ortaya çıkan dar yüzey alanlarının genişletilmesi önlenmiş olur."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Dolgu"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "Dolum eklenen dahili çıkıntıların minimum açısı. 0° değerde nesneler tamamen doldurulur, 90°’de dolgu yapılmaz."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Yüzey Kaldırma Genişliği"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "Kaldırılacak olan yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt/üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Üst Yüzey Kaldırma Genişliği"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "Kaldırılacak olan üst yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Alt Yüzey Kaldırma Genişliği"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "Kaldırılacak olan alt yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Yüzey Genişleme Mesafesi"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "Yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi komşu katmanlardaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Üst Yüzey Genişleme Mesafesi"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "Üst yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yukarıdaki katmandaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Alt Yüzey Genişleme Mesafesi"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "Alt yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yüzeyin aşağıdaki katmandaki duvara daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Genişleme için Maksimum Yüzey Açısı"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Nesnenizin bu ayardan daha geniş açıya sahip üst ve/veya alt zeminlerinin yüzeyleri genişletilmez. Böylece model yüzeyinin neredeyse dik açıya sahip olduğu durumlarda ortaya çıkan dar yüzey alanlarının genişletilmesi önlenmiş olur. 0°’lik bir açı yataydır; 90°’lik bir açı dikeydir."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Genişleme için Minimum Yüzey Genişliği"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Bu değerden daha dar olan yüzey alanları genişletilmez. Böylece model yüzeyinin dikeye yakın bir eğime sahip olduğu durumlarda ortaya çıkan dar yüzey alanlarının genişletilmesi önlenmiş olur."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Kaplamanın Kenar Desteği Kalınlığı"
@@ -2560,8 +2590,8 @@ msgstr "İlk Katman Hızı"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "İlk katman için belirlenen hız. Yapı tahtasına yapışmayı artırmak için daha düşük bir değer önerilmektedir."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,8 +5104,8 @@ msgstr "Örgü İşleme Sıralaması"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Çakışan birden çok dolgu örgüsünü göz önüne alarak bu örgünün önceliğini belirler. Birden çok dolgu örgüsünün çakıştığı alanlar en düşük sıralamaya sahip örgünün ayarlarını alacaktır. Daha yüksek sıralamaya sahip dolgu örgüsü, dolgu örgülerinin dolgusunu daha düşük sıralı ve normal örgüler ile değiştirecektir."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5423,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "Yazdırılabilir yapıldıktan sonra çıkıntıların en büyük açısı. 0° değerindeyken tüm modeller yapı levhasına bağlı bir model parçasıyla değiştirilirken 90° modeli hiçbir şekilde değiştirmez."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Taramayı Etkinleştir"
@@ -6361,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Modeli dosyadan indirirken modele uygulanacak olan dönüşüm matrisi."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Ekstruder ofsetini koordinat sistemine uygulayın."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Kovan"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Nesnenizin bu ayardan daha geniş açıya sahip üst ve/veya alt zeminlerinin yüzeyleri genişletilmez. Böylece model yüzeyinin neredeyse dik açıya sahip olduğu durumlarda ortaya çıkan dar yüzey alanlarının genişletilmesi önlenmiş olur. 0°’lik bir açı yataydır; 90°’lik bir açı dikeydir."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "İlk katman için belirlenen hız. Yapı tahtasına yapışmayı artırmak için daha düşük bir değer önerilmektedir."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Çakışan birden çok dolgu örgüsünü göz önüne alarak bu örgünün önceliğini belirler. Birden çok dolgu örgüsünün çakıştığı alanlar en düşük sıralamaya sahip örgünün ayarlarını alacaktır. Daha yüksek sıralamaya sahip dolgu örgüsü, dolgu örgülerinin dolgusunu daha düşük sıralı ve normal örgüler ile değiştirecektir."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "Isınan yapı levhası için kullanılan sıcaklık. Bu değer 0 ise yatak sıcaklığı değiştirilmez."
diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po
index e61f5663d9..786b7214db 100644
--- a/resources/i18n/zh_CN/cura.po
+++ b/resources/i18n/zh_CN/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -17,175 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "未知"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "正在载入打印机..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "无法连接到下列打印机，因为这些打印机已在组中"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "正在设置偏好设置..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "可用的网络打印机"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "正在初始化当前机器..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "未覆盖"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "正在初始化机器管理器..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "是否确实要删除 {0}？此操作无法撤消！"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "正在初始化成形空间体积..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "正在设置场景..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "视觉"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "正在载入界面..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "正在初始化引擎..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "草稿"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "错误"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "是否确实要删除 {0}？此操作无法撤消！"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "自定义材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "自定义"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "未知"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "自定义配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "所有支持的文件类型 ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "所有文件 (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "登录失败"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "正在为模型寻找新位置"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "正在寻找位置"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "视觉"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "无法在成形空间体积内放下全部模型"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "视觉配置文件用于打印视觉原型和模型，可实现出色的视觉效果和表面质量。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "找不到位置"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "不能从用户数据目录创建存档: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "工程配置文件用于打印功能性原型和最终用途部件，可提高准确性和减小公差。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "备份"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "草稿"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "草稿配置文件用于打印初始原型和概念验证，可大大缩短打印时间。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "无法连接到下列打印机，因为这些打印机已在组中"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "可用的网络打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "成形空间体积"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "未覆盖"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura 无法启动"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -200,32 +213,32 @@ msgstr ""
 "                    <p>请向我们发送此错误报告，以便解决问题。</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "向 Ultimaker 发送错误报告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "显示详细的错误报告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "显示配置文件夹"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "备份并重置配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "错误报告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -236,1192 +249,848 @@ msgstr ""
 "            <p>请使用“发送报告”按钮将错误报告自动发布到我们的服务器</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "系统信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "未知"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura 语言"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "操作系统语言"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "尚未初始化<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL 版本： {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL 供应商： {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL 渲染器： {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "错误追溯"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "日志"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "发送报告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "正在载入打印机..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "正在设置偏好设置..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "正在初始化当前机器..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "正在初始化机器管理器..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "正在初始化成形空间体积..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "正在设置场景..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "正在载入界面..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "正在初始化引擎..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一次只能加载一个 G-code 文件。{0} 已跳过导入"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "如果加载 G-code，则无法打开其他任何文件。{0} 已跳过导入"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "错误"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "复制并放置模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "放置模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "放置模型"
+msgid "Login failed"
+msgstr "登录失败"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "无法读取响应。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "无法开始新的登录过程。请检查是否仍在尝试进行另一登录。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "无法连接 Ultimaker 帐户服务器。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "所提供的状态不正确。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "在授权此应用程序时，须提供所需权限。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "尝试登录时出现意外情况，请重试。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "无法开始新的登录过程。请检查是否仍在尝试进行另一登录。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "无法连接 Ultimaker 帐户服务器。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "文件已存在"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "文件 <filename>{0}</filename> 已存在。您确定要覆盖它吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "文件 URL 无效："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "喷嘴"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "已根据挤出机的当前可用性更改设置："
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "设置已更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "挤出机已禁用"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "无法将配置文件导出至<filename> {0} </filename>： <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "无法将配置文件导出至<filename> {0} </filename>： 写入器插件报告故障。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "配置文件已导出至：<filename> {0} </filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "导出成功"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "无法从 <filename>{0}</filename> 导入配置文件：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "无法在添加打印机前从 <filename>{0}</filename> 导入配置文件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "没有可导入文件 <filename>{0}</filename> 的自定义配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "无法从 <filename>{0}</filename> 导入配置文件："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "此配置文件 <filename>{0}</filename> 包含错误数据，无法导入。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "无法从 <filename>{0}</filename> 导入配置文件："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "已成功导入配置文件 {0}。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "文件 {0} 不包含任何有效的配置文件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "配置 {0} 文件类型未知或已损坏。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "自定义配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "配置文件缺少打印质量类型定义。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "缺少全局堆栈。"
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "无法添加配置文件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "质量类型“{0}”与当前有效的机器定义“{1}”不兼容。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "警告：配置文件不可见，因为其质量类型“{0}”对当前配置不可用。请切换到可使用此质量类型的材料/喷嘴组合。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "不支持"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "喷嘴"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "已根据挤出机的当前可用性更改设置："
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "正在为模型寻找新位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "设置已更新"
+msgid "Finding Location"
+msgstr "正在寻找位置"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "无法在成形空间体积内放下全部模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "挤出机已禁用"
+msgid "Can't Find Location"
+msgstr "找不到位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "组 ＃{group_nr}"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "添加"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "完成"
+msgid "Close"
+msgstr "关闭"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "取消"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "组 ＃{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "完成"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "外壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "内壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "表层"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "支撑填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "支撑接触面"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "支撑"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "装填塔"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "移动"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "回抽"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "其它"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "下一步"
+msgid "Add"
+msgstr "添加"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "关闭"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "三维模型的助理"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "项目文件 <filename>{0}</filename> 包含未知机器类型 <message>{1}</message>。无法导入机器。将改为导入模型。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "打开项目文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "突然无法访问项目文件 <filename>{0}</filename>：<message>{1}</message>。"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "由于“打印序列”设置的值，成形空间体积高度已被减少，以防止十字轴与打印模型相冲突。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "无法打开项目文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "项目文件 <filename>{0}</filename> 是用此 Ultimaker Cura 版本未识别的配置文件制作的。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推荐"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "自定义"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF 编写器插件已损坏。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "没有在此处写入工作区的权限。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "操作系统不允许向此位置或用此文件名保存项目文件。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "写入 3mf 文件时出错。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF 文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura 项目 3MF 文件"
+msgid "Build Volume"
+msgstr "成形空间体积"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF 文件"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "不能从用户数据目录创建存档: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Backups"
+msgid "Backup"
 msgstr "备份"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "上传您的备份时出错。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "正在创建您的备份..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "创建您的备份时出错。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "正在上传您的备份..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "您的备份已完成上传。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "备份超过了最大文件大小。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "尝试恢复您的备份时出错。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "管理备份"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "无法切片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "无法使用当前设置进行切片。以下设置存在错误：{0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "因部分特定模型设置而无法切片。 以下设置在一个或多个模型上存在错误： {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "无法切片（原因：主塔或主位置无效）。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "无法切片，因为存在与已禁用挤出机 %s 相关联的对象。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "试图在没有适当数据或元数据的情况下恢复Cura备份。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"请检查设置并检查您的模型是否：\n"
-"- 适合构建体积\n"
-"- 分配给了已启用的挤出器\n"
-"- 尚未全部设置为修改器网格"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "尝试恢复的 Cura 备份版本高于当前版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "正在处理层"
+msgid "Multiplying and placing objects"
+msgstr "复制并放置模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "信息"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "无法获取更新信息。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "您的 {machine_name} 可能有新功能或错误修复可用！如果打印机上的固件还不是最新版本，建议将它更新为 {latest_version} 版。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "新 %s 固件可用"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "如何更新"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "更新固件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "压缩 G-code 文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter 不支持文本模式。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "GCode 文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "解析 G-code"
+msgid "Placing Objects"
+msgstr "放置模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code 详细信息"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter 不支持非文本模式。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "导出前请先准备 G-code。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 图像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 图像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 图像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 图像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 图像"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "打印机设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "监控"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "单一模型设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "设置对每个模型的单独设定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "后期处理"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "修改 G-Code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "准备"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "预览"
+msgid "Placing Object"
+msgstr "放置模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "保存至可移动磁盘"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "保存到可移动磁盘 {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "没有可进行写入的文件格式！"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "保存到可移动磁盘 <filename> {0} </filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "正在保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "无法保存到 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "尝试写入到 {device} 时找不到文件名。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "无法保存到可移动磁盘 {0}：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "保存到可移动磁盘 {0} ：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "文件已保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "弹出"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "弹出可移动设备 {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "已弹出 {0}。现在，您可以安全地拔出磁盘。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "安全移除硬件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "无法弹出 {0}，另一个程序可能正在使用磁盘。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "可移动磁盘"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "启用“单线打印”后，Cura 将无法准确地显示打印层。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "仿真视图"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "由于需要先切片，因此未显示任何内容。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "无层可显示"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "不再显示此消息"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "分层视图"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "您的模型不是流形。突出显示的区域指示缺少或多余的表面。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "模型错误"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "实体视图"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "支撑拦截器"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "创建一个不打印支撑的体积。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "是否要与您的帐户同步材料和软件包?"
+msgid "AMF File"
+msgstr "AMF 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "检测到您的 Ultimaker 帐户有更改"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "GCode 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同步"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "更新固件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "正在同步..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "拒绝"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "同意"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "插件许可协议"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "拒绝并从帐户中删除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} 个插件下载失败"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "正在同步..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "检测到您的 Ultimaker 帐户有更改"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "需要退出并重新启动 {}，然后更改才能生效。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} 个插件下载失败"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "是否要与您的帐户同步材料和软件包?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "打开压缩三角网格"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "同步"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA 数据资源交换"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "单一模型设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF 二进制"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "设置对每个模型的单独设定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF 嵌入式 JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "后期处理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "斯坦福三角格式"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "修改 G-Code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "压缩 COLLADA 数据资源交换"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 格式包"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "无法切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "无法写入到 UFP 文件："
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "无法使用当前设置进行切片。以下设置存在错误：{0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "调平打印平台"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "因部分特定模型设置而无法切片。 以下设置在一个或多个模型上存在错误： {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "选择升级"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "无法切片（原因：主塔或主位置无效）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "通过云打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "无法切片，因为存在与已禁用挤出机 %s 相关联的对象。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "通过云打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"请检查设置并检查您的模型是否：\n"
+"- 适合构建体积\n"
+"- 分配给了已启用的挤出器\n"
+"- 尚未全部设置为修改器网格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "通过云连接"
+msgid "Processing Layers"
+msgstr "正在处理层"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "上传打印作业时出现未知错误代码：{0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "信息"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 联机打印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "通过 USB 联机打印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "通过 USB 连接"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "正在进行打印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "通过网络连接"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "从您的 Ultimaker 帐户中检测到新的打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "正在从您的帐户添加打印机 {name} ({model})"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "... 和另外 {0} 台"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "从 Digital Factory 添加的打印机："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "某些打印机无云连接可用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "这些打印机未链接到 Digital Factory："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "要建立连接，请访问 {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "保留打印机配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "删除打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "将删除 {printer_name}，直到下次帐户同步为止。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "要永久删除 {printer_name}，请访问 {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "是否确实要暂时删除 {printer_name}？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "是否删除打印机？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1430,2156 +1099,2493 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "您即将从 Cura 中删除 {0} 台打印机。此操作无法撤消。\n是否确实要继续？"
+msgstr[0] ""
+"您即将从 Cura 中删除 {0} 台打印机。此操作无法撤消。\n"
+"是否确实要继续？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "您即将从 Cura 中删除所有打印机。此操作无法撤消。\n是否确定继续？"
+msgstr ""
+"您即将从 Cura 中删除所有打印机。此操作无法撤消。\n"
+"是否确定继续？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "使用您的 Ultimaker account 帐户从任何地方发送和监控打印作业。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "通过云打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "连接到 Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "通过云打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "开始"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "通过云连接"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "上传打印作业时出现未知错误代码：{0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
+msgid "tomorrow"
+msgstr "明天"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "请更新升级打印机"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "今天"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
+msgid "Sending Print Job"
+msgstr "发送打印作业"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "正在将材料发送到打印机"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "正在将打印作业上传至打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "您正在尝试连接到 {0}，但它不是组中的主机。您可以访问网页，将其配置为组主机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "非组中的主机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "配置组"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "使用您的 Ultimaker account 帐户从任何地方发送和监控打印作业。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "连接到 Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "开始"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "请等待当前作业完成发送。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "打印错误"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "无法将数据上传到打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "网络错误"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "发送打印作业"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura 已检测到材料配置文件尚未安装到组 {0} 中的主机打印机上。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "正在将打印作业上传至打印机。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "正在将材料发送到打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "打印作业队列已满。打印机无法接受新作业。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "队列已满"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "打印作业已成功发送到打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "数据已发送"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "您正在尝试连接未运行 Ultimaker Connect 的打印机。请将打印机更新至最新固件。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "请更新升级打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "通过网络打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "通过网络打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "已通过网络连接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "通过网络连接"
+msgid "Select upgrades"
+msgstr "选择升级"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "明天"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "调平打印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "今天"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推荐"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 联机打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "项目文件 <filename>{0}</filename> 包含未知机器类型 <message>{1}</message>。无法导入机器。将改为导入模型。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "通过 USB 联机打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "打开项目文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "通过 USB 连接"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "突然无法访问项目文件 <filename>{0}</filename>：<message>{1}</message>。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "正在进行 USB 打印，关闭 Cura 将停止此打印。您确定吗？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "无法打开项目文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "正在进行打印在上一次打印完成之前，Cura 无法通过 USB 启动另一次打印。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "正在进行打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "项目文件 <filename>{0}</filename> 是用此 Ultimaker Cura 版本未识别的配置文件制作的。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 文件"
+msgid "3MF File"
+msgstr "3MF 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透视视图"
+msgid "Compressed G-code File"
+msgstr "压缩 G-code 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter 不支持文本模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "打开项目"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "三维模型的助理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "更新已有配置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>由于模型的大小和材质的配置，一个或多个3D模型可能无法最优地打印:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>找出如何确保最好的打印质量和可靠性.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">查看打印质量指南</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新建"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "无法获取更新信息。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "摘要 - Cura 项目"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "您的 {machine_name} 可能有新功能或错误修复可用！如果打印机上的固件还不是最新版本，建议将它更新为 {latest_version} 版。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "打印机设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "新 %s 固件可用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "机器的设置冲突应如何解决？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "如何更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "类型"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "打印机组"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "解析 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "配置文件设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code 详细信息"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "发送文件之前，请确保 G-code 适用于当前打印机和打印机配置。当前 G-code 文件可能不准确。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "支撑拦截器"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "配置文件中的冲突如何解决？"
+msgid "Create a volume in which supports are not printed."
+msgstr "创建一个不打印支撑的体积。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "名字"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "打开压缩三角网格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA 数据资源交换"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "不在配置文件中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF 二进制"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 重写"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF 嵌入式 JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "衍生自"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "斯坦福三角格式"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 重写"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "压缩 COLLADA 数据资源交换"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "材料设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 格式包"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "材料的设置冲突应如何解决？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "设置可见性"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "准备"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "模式"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "监控"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "可见设置："
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透视视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "写入 3mf 文件时出错。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "加载项目将清除打印平台上的所有模型。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "打开"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura 项目 3MF 文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "想要更多？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF 编写器插件已损坏。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "立即备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "没有在此处写入工作区的权限。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自动备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "操作系统不允许向此位置或用此文件名保存项目文件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "在 Cura 每天启动时自动创建备份。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "预览"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "恢复"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "分层视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "删除备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "启用“单线打印”后，Cura 将无法准确地显示打印层。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "您确定要删除此备份吗？此操作无法撤销。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "仿真视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "恢复备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "由于需要先切片，因此未显示任何内容。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "无层可显示"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 版本"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "不再显示此消息"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "机器"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "打印机设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "材料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "实体视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "配置文件"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "插件"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "我的备份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "无法写入到 UFP 文件："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter 不支持非文本模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "导出前请先准备 G-code。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "备份并同步您的 Cura 设置。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 图像"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "登录"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 图像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG 图像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP 图像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 图像"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "尝试恢复您的备份时出错。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "备份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "上传您的备份时出错。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "正在创建您的备份..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "创建您的备份时出错。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "正在上传您的备份..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "您的备份已完成上传。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "备份超过了最大文件大小。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "管理备份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "更新固件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "固件是直接在 3D 打印机上运行的一个软件。此固件控制步进电机，调节温度并最终使打印机正常工作。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "新打印机出厂配备的固件完全可以正常使用，但新版本往往具有更多的新功能和改进。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "自动升级固件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "上传自定义固件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "未连接打印机，无法更新固件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "与打印机间的连接不支持固件更新，因此无法更新固件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "选择自定义固件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "固件升级"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "更新固件中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "固件更新已完成。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "由于未知错误，固件更新失败。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "由于通信错误，导致固件升级失败。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "由于输入/输出错误，导致固件升级失败。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "由于固件丢失，导致固件升级失败。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "转换图像..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "每个像素与底板的最大距离"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "需要接受许可证才能安装该程序包"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高度 (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "您的帐户有更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "距离打印平台的底板高度，以毫米为单位。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "解除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "底板 (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "打印平台宽度，以毫米为单位。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "将添加以下程序包："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "宽度 (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "打印平台深度，以毫米为单位"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "确认卸载"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深度 (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "颜色越深厚度越大"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "颜色越浅厚度越大"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "确认"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "无法连接到Cura包数据库。请检查您的连接。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "线性"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "社区贡献"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "社区插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "通用材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1 毫米透射率 (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "要应用到图像的平滑量。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "更新日期"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "平滑"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "品牌"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "确定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "下载项"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "打印机"
+msgid "Installed plugins"
+msgstr "已安装的插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "喷嘴设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "尚未安装任何插件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "喷嘴孔径"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "已安装的材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "尚未安装任何材料。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "兼容的材料直径"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "已捆绑的插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "喷嘴偏移 X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "已捆绑的材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "喷嘴偏移 Y"
+msgid "Website"
+msgstr "网站"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷却风扇数量"
+msgid "Email"
+msgstr "电子邮件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "挤出机的开始 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "请登录以获取经验证适用于 Ultimaker Cura Enterprise 的插件和材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "挤出机的结束 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "登录"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "打印机设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "获取包..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (宽度)"
+msgid "Compatibility"
+msgstr "兼容性"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (深度)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "机器"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高度)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "打印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "打印平台形状"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "支持"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "置中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "质量"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "加热床"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "技术数据表"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "加热的构建体积"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "安全数据表"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code 风格"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "打印指南"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "打印头设置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "网站"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 最小值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 最小值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X 最大值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "安装"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y 最大值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "前往网上市场"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "十字轴高度"
+msgid "Will install upon restarting"
+msgstr "将安装后重新启动"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "挤出机数目"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "开始 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "结束 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"请确保您的打印机已连接：\n"
-"- 检查打印机是否已启动。\n"
-"- 检查打印机是否连接至网络。\n"
-"- 检查您是否已登录查找云连接的打印机。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "更新需要<a href='%1'>登录</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "降级"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "卸载"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "已安装"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "安装或更新需要<a href='%1'>登录</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>购买材料线轴</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "高级"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "搜索材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "请将打印机连接到网络。"
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "在包装更改生效之前，您需要重新启动Cura。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "查看联机用户手册"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "退出 %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "背部"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "安装"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "网格类型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "正常模式"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "打印为支撑"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "修改重叠设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "不支持重叠"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "仅填充网格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "切割网格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "选择设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "选择对此模型的自定义设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "筛选..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "显示全部"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "后期处理插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "后期处理脚本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "添加一个脚本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "更改处于活动状态的后期处理脚本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "以下脚本处于活动状态："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "颜色方案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "材料颜色"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "走线类型"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "速度"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "层厚度"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "兼容模式"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "空驶"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Helpers"
-msgstr "打印辅助结构"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "外壳"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "填充"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "只显示顶层"
+msgid "Queued"
+msgstr "已排队"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "在顶部显示 5 层打印细节"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "请于浏览器中进行管理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "顶 / 底层"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "队列中无打印任务。可通过切片和发送添加任务。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "内壁"
+msgid "Print jobs"
+msgstr "打印作业"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "最小"
+msgid "Total print time"
+msgstr "总打印时间"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "最大"
+msgid "Waiting for"
+msgstr "等待"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "更多关于匿名数据收集的信息"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "我不想发送匿名数据"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "允许发送匿名数据"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "背部"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "兼容性"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "机器"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "打印平台"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "支持"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "质量"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "技术数据表"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "安全数据表"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "打印指南"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "网站"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "已安装"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "安装或更新需要<a href='%1'>登录</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>购买材料线轴</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "更新"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "更新"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "更新"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "高级"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "前往网上市场"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "搜索材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "在包装更改生效之前，您需要重新启动Cura。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "退出 %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "插件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "安装"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "将安装后重新启动"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "更新需要<a href='%1'>登录</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "降级"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "卸载"
+msgid "Configuration Changes"
+msgstr "配置更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "安装"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "您的帐户有更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "解除"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "下一步"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "将添加以下程序包："
+msgid "Override"
+msgstr "覆盖"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "由于 Cura 版本不兼容，无法安装以下程序包："
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "确认卸载"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "您正在卸载仍在使用的材料和/或配置文件。确认会将以下材料/配置文件重置为默认值。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "确认"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "分配的打印机 %1 需要以下配置更改："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "需要接受许可证才能安装该程序包"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "已向打印机 %1 分配作业，但作业包含未知的材料配置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "网站"
+msgid "Change material %1 from %2 to %3."
+msgstr "将材料 %1 从 %2 更改为 %3。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "电子邮件"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "将 %3 作为材料 %1 进行加载（此操作无法覆盖）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "版本"
+msgid "Change print core %1 from %2 to %3."
+msgstr "将 Print Core %1 从 %2 更改为 %3。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "更新日期"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "将打印平台更改为 %1（此操作无法覆盖）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "品牌"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "覆盖将使用包含现有打印机配置的指定设置。这可能会导致打印失败。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "下载项"
+msgid "Glass"
+msgstr "玻璃"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "社区贡献"
+msgid "Aluminum"
+msgstr "铝"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "社区插件"
+msgid "Unavailable printer"
+msgstr "不可用的打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "通用材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "无法连接到Cura包数据库。请检查您的连接。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "已安装的插件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "尚未安装任何插件。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "已安装的材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "尚未安装任何材料。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "已捆绑的插件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "已捆绑的材料"
+msgid "First available"
+msgstr "第一个可用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "获取包..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "请登录以获取经验证适用于 Ultimaker Cura Enterprise 的插件和材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "市场"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "打印平台调平"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "开始进行打印平台调平"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "移动到下一个位置"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "请选择适用于 Ultimaker Original 的升级文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "热床（官方版本或自制）"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "请及时更新打印机固件以远程管理打印队列。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "连接到网络打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "欲通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接至网络。若不能连接 Cura 与打印机，亦可通过使用 USB 设备将 G-code 文件传输到打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "请从以下列表中选择您的打印机："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "编辑"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "删除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "刷新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "如果您的打印机未列出，请阅读<a href='%1'>网络打印故障排除指南</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "类型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "固件版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "地址"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "这台打印机未设置为运行一组打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "这台打印机是一组共 %1 台打印机的主机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "连接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "IP 地址无效"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "请输入有效的 IP 地址。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "打印机网络地址"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "请输入打印机在网络上的 IP 地址。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "配置更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "覆盖"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "分配的打印机 %1 需要以下配置更改："
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "已向打印机 %1 分配作业，但作业包含未知的材料配置。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "将材料 %1 从 %2 更改为 %3。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "将 %3 作为材料 %1 进行加载（此操作无法覆盖）。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "将 Print Core %1 从 %2 更改为 %3。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "将打印平台更改为 %1（此操作无法覆盖）。"
+msgid "OK"
+msgstr "确定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "覆盖将使用包含现有打印机配置的指定设置。这可能会导致打印失败。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "通过网络打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "玻璃"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "铝"
+msgid "Printer selection"
+msgstr "打印机选择"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "移至顶部"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "删除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "恢复"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "正在暂停..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "正在恢复..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "暂停"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "正在中止..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中止"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "您确定要将 %1 移至队列顶部吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "将打印作业移至顶部"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "您确定要删除 %1 吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "删除打印作业"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "您确定要中止 %1 吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "中止打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "已中止"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "已完成"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "正在准备..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "正在中止..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "正在暂停..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "已暂停"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "正在恢复..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "需要采取行动"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "完成 %1 于 %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "管理打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "请及时更新打印机固件以远程管理打印队列。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "正在加载..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "不可用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "无法连接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "空闲"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "未命名"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "需要更改配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "详细信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "不可用的打印机"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "请选择适用于 Ultimaker Original 的升级文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "第一个可用"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "热床（官方版本或自制）"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "已中止"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "打印平台调平"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "已完成"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "为了确保打印质量出色，您现在可以开始调整您的打印平台。当您点击「移动到下一个位置」时，喷嘴将移动到可以调节的不同位置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "正在准备..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "在打印头停止的每一个位置下方插入一张纸，并调整平台高度。当纸张恰好被喷嘴的尖端轻微压住时，此时打印平台的高度已被正确校准。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "正在中止..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "开始进行打印平台调平"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "正在暂停..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "移动到下一个位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "已暂停"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "打开项目"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "正在恢复..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "更新已有配置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "需要采取行动"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新建"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "完成 %1 于 %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "摘要 - Cura 项目"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "打印机设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "机器的设置冲突应如何解决？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "类型"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "打印机组"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "配置文件设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "配置文件中的冲突如何解决？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "名字"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "不在配置文件中"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 重写"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "衍生自"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 重写"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "材料设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "材料的设置冲突应如何解决？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "设置可见性"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "模式"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "可见设置："
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "加载项目将清除打印平台上的所有模型。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "打开"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "此次打印可能出现了某些问题。点击查看调整提示。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"请确保您的打印机已连接：\n"
+"- 检查打印机是否已启动。\n"
+"- 检查打印机是否连接至网络。\n"
+"- 检查您是否已登录查找云连接的打印机。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "请将打印机连接到网络。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "查看联机用户手册"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "更多关于匿名数据收集的信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据。以下是所有数据分享的示例："
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "我不想发送匿名数据"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "允许发送匿名数据"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "已排队"
+msgid "Color scheme"
+msgstr "颜色方案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "请于浏览器中进行管理"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "材料颜色"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "走线类型"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "速度"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "队列中无打印任务。可通过切片和发送添加任务。"
+msgid "Compatibility Mode"
+msgstr "兼容模式"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "打印作业"
+msgid "Travels"
+msgstr "空驶"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "总打印时间"
+msgid "Helpers"
+msgstr "打印辅助结构"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "等待"
+msgid "Shell"
+msgstr "外壳"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "通过网络打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "打印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "打印机选择"
+msgid "Only Show Top Layers"
+msgstr "只显示顶层"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "登录"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "在顶部显示 5 层打印细节"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "互连 3D 打印的特点"
+msgid "Top / Bottom"
+msgstr "顶 / 底层"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- 借助更多的打印配置文件和插件定制您的体验\n"
-"- 通过同步设置并将其加载到任何位置保持灵活性\n"
-"- 使用 Ultimaker 打印机上的远程工作流提高效率"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "内壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "创建账户"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "最小"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "正在检查..."
+msgid "max"
+msgstr "最大"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "喷嘴设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "帐户已同步"
+msgid "Nozzle size"
+msgstr "喷嘴孔径"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "发生了错误..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "安装挂起的更新"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "兼容的材料直径"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "检查是否存在帐户更新"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "喷嘴偏移 X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "上次更新时间：%1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "喷嘴偏移 Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帐户"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "冷却风扇数量"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "注销"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "挤出机的开始 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "挤出机的结束 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "打印机设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "无可用时间估计"
+msgid "X (Width)"
+msgstr "X (宽度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "无可用成本估计"
+msgid "Y (Depth)"
+msgstr "Y (深度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "预览"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (高度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "预计时间"
+msgid "Build plate shape"
+msgstr "打印平台形状"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "预计材料"
+msgid "Origin at center"
+msgstr "置中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "加热床"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "加热的构建体积"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "正在切片..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code 风格"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "无法切片"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "打印头设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 最小值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 最小值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X 最大值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y 最大值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "十字轴高度"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "挤出机数目"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "开始 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "结束 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "转换图像..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "每个像素与底板的最大距离"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "距离打印平台的底板高度，以毫米为单位。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "底板 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "打印平台宽度，以毫米为单位。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "宽度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "打印平台深度，以毫米为单位"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "在影像浮雕中，为了阻挡更多光源通过，深色像素应对应于较厚的位置。在高度图中，浅色像素代表着更高的地形，因此浅色像素对应于生成的 3D 模型中较厚的位置。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "颜色越深厚度越大"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "颜色越浅厚度越大"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "对于隐雕，提供一个用于半透明的简单对数模型。对于高度图，像素值与高度线性对应。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "线性"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "穿透 1 毫米厚的打印件的光线百分比。降低此值将增大图像暗区中的对比度并减小图像亮区中的对比度。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1 毫米透射率 (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "要应用到图像的平滑量。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "平滑"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "我的备份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "您目前没有任何备份。使用“立即备份”按钮创建一个备份。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "在预览阶段，将限制为 5 个可见备份。移除一个备份以查看更早的备份。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "备份并同步您的 Cura 设置。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "正在处理中"
+msgid "Want more?"
+msgstr "想要更多？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "切片"
+msgid "Backup Now"
+msgstr "立即备份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "开始切片流程"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自动备份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "在 Cura 每天启动时自动创建备份。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "机器"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "插件"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "取消"
+msgid "Restore"
+msgstr "恢复"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "显示联机故障排除指南"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "删除备份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "切换完整界面"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "您确定要删除此备份吗？此操作无法撤销。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "退出完整界面"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "恢复备份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "撤销(&U)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "您需要重新启动 Cura 才能恢复备份。您要立即关闭 Cura 吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "重做(&R)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 备份"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "收藏"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "通用"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "文件(&F)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "保存项目(＆S)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "导出(&E)..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "退出(&Q)"
+msgid "Export Selection..."
+msgstr "导出选择..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D 视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "打开最近使用过的文件(&R)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "选择配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "自定义"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "已启用"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "用胶粘和此材料组合以产生更好的附着。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "市场"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "正在从打印机加载可用配置..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "该配置不可用，因为打印机已断开连接。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "视图(&V)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "正视图"
+msgid "&Camera position"
+msgstr "摄像头位置(&C)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "顶视图"
+msgid "Camera view"
+msgstr "摄像头视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "左视图"
+msgid "Perspective"
+msgstr "透视"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "右视图"
+msgid "Orthographic"
+msgstr "正交"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "配置 Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "打印平台(&B)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "新增打印机(&A)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "网络打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "管理打印机(&I)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "本地打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "管理材料..."
+msgid "Visible Settings"
+msgstr "可见设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "从市场添加更多材料"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "使用当前设置 / 重写值更新配置文件（&U）"
+msgid "Collapse All Categories"
+msgstr "折叠所有类别"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "舍弃当前更改（&D）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "管理设置可见性..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "从当前设置 / 重写值创建配置文件（&C）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "设置(&S)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "管理配置文件.."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "打印机（&P）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "显示在线文档(&D)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "材料（&M）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "BUG 反馈(&B)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "设为主要挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "新增功能"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "启用挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "关于..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "禁用挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "删除所选模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "居中所选模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "打印所选模型："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "复制所选模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "删除模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "复制个数"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "使模型居于平台中央（&N）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "绑定模型（&G）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "自定义配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "拆分模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "舍弃当前更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "合并模型（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "复制模型…（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"某些设置/重写值与存储在配置文件中的值不同。\n"
+"\n"
+"点击打开配置文件管理器。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "选择所有模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "开"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "清空打印平台"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "关"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "重新载入所有模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "实验性"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "将所有模型编位到所有打印平台"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推荐"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "编位所有的模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "自定义"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "为所选模型编位"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "打印设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "复位所有模型的位置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "打印设置已禁用。无法修改 G code 文件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "复位所有模型的变动"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "渐层填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "打开文件（&O）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "新建项目（&N）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "显示配置文件夹"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "配置设定可见性..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "支持"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "市场(&M)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "在模型的悬垂（Overhangs）部分生成支撑结构。若不这样做，这些部分在打印时将倒塌。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "这个包将在重新启动后安装。"
+msgid "Adhesion"
+msgstr "附着"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "基本"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "允许打印 Brim 或 Raft。这将在您的对象周围或下方添加一个容易切断的平面区域。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "设置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "没有 %1 配置文件可用于挤出器 %2 中的配置。将改为使用默认意图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "配置文件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "正在打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "正在关闭 %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "作业名"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "您确定要退出 %1 吗？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "打印时间"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "预计剩余时间"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "打开文件"
+msgid "Discard or Keep changes"
+msgstr "舍弃或保留更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "安装包"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"您已经自定义了若干配置文件设置。\n"
+"是否要在切换配置文件后保留这些更改的设置？\n"
+"或者，也可舍弃更改以从“%1”加载默认值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "打开文件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "配置文件设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "当前更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "新增打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "总是询问"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新增功能"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "舍弃更改，并不再询问此问题"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "保留更改，并不再询问此问题"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "舍弃更改"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "保留更改"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "关于 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "版本： %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熔丝 3D 打印技术的的端对端解决方案。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3588,1994 +3594,2101 @@ msgstr ""
 "Cura 由 Ultimaker B.V. 与社区合作开发。\n"
 "Cura 使用以下开源项目："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "图形用户界面"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "应用框架"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code 生成器"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "进程间通信交互使用库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "编程语言"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 框架"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 框架绑定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C / C++ 绑定库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "数据交换格式"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "科学计算支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "高速运算支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "用于处理 STL 文件的支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "用于处理平面对象的支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "用于处理三角网格的支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "用于处理 3MF 文件的支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "用于文件元数据和流媒体的支持库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "串口通讯库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf 发现库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "多边形剪辑库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "适用于 Python 的静态类型检查器"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "用于验证 SSL 可信度的根证书"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 错误跟踪库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Prusa Research 开发的多边形打包库"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "libnest2d 的 Python 绑定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "字体"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 图标"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux 交叉分布应用程序部署"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "打开项目文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "记住我的选择"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "作为项目打开"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "导入模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "舍弃或保留更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "您已经自定义了若干配置文件设置。\n是否要在切换配置文件后保留这些更改的设置？\n或者，也可舍弃更改以从“%1”加载默认值。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "配置文件设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "当前更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "总是询问"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "舍弃更改，并不再询问此问题"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "保留更改，并不再询问此问题"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "舍弃更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "保留更改"
+msgid "Open file(s)"
+msgstr "打开文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "我们已经在您所选择的文件中找到一个或多个项目文件，但一次只能打开一个项目文件。我们建议只从那些文件中导入模型而不打开项目。您要继续操作吗?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "导入所有模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "保存项目"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "挤出机 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & 材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "保存时不再显示项目摘要"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "保存"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "用 %1 打印所选模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "打开项目文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "这是一个 Cura 项目文件。您想将其作为一个项目打开还是从中导入模型？"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "记住我的选择"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "作为项目打开"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "导入模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "未命名"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "文件(&F)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "欢迎使用 Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "编辑（&E）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "视图(&V)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "开始"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "设置(&S)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "扩展(&X)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "帮助我们改进 Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "偏好设置（&R）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "帮助(&H)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "机器类型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新建项目"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "材料使用"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "你确定要开始一个新项目吗？这将清除打印平台及任何未保存的设置。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "切片数量"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "市场"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "打印设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "配置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "更多信息"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "此配置不可用，因为 %1 未被识别。请访问 %2 以下载正确的材料配置文件。"
+msgid "Add printer by IP address"
+msgstr "按 IP 地址添加打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "输入您打印机的 IP 地址。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "添加"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "市场"
+msgid "Could not connect to device."
+msgstr "无法连接到设备。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "正在从打印机加载可用配置..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "无法连接到 Ultimaker 打印机？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "该配置不可用，因为打印机已断开连接。"
+msgid "The printer at this address has not responded yet."
+msgstr "该网络地址的打印机尚未响应。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "选择配置"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "返回"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "连接"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "配置"
+msgid "Add a printer"
+msgstr "添加打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "自定义"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "添加已联网打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "打印机"
+msgid "Add a non-networked printer"
+msgstr "添加未联网打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "已启用"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "材料"
+msgid "Add a Cloud printer"
+msgstr "添加云打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "用胶粘和此材料组合以产生更好的附着。"
+msgid "Waiting for Cloud response"
+msgstr "等待云响应"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "打印所选模型："
+msgid "No printers found in your account?"
+msgstr "在您的帐户中未找到任何打印机？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "复制所选模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "您帐户中的以下打印机已添加到 Cura 中："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "手动添加打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "复制个数"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "保存项目(＆S)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "导出(&E)..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "导出选择..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "材料"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "收藏"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "跳过"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "通用"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "用户协议"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "网络打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒绝并关闭"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "本地打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "打开最近使用过的文件(&R)"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "未找到网络内打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "打印机（&P）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "刷新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "材料（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "按 IP 添加打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "设为主要挤出机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "添加云打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "启用挤出机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "故障排除"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "禁用挤出机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "制造商"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "配置文件作者"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "打印机名称"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "请为您的打印机命名"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "上次更新时间：%1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 帐户"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "注销"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "登录"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "正在检查..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "帐户已同步"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "发生了错误..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "安装挂起的更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "检查是否存在帐户更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "对象列表"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "可见设置"
+msgid "Show Online Troubleshooting Guide"
+msgstr "显示联机故障排除指南"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "折叠所有类别"
+msgid "Toggle Full Screen"
+msgstr "切换完整界面"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "管理设置可见性..."
+msgid "Exit Full Screen"
+msgstr "退出完整界面"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "撤销(&U)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "重做(&R)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "退出(&Q)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "摄像头位置(&C)"
+msgid "3D View"
+msgstr "3D 视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "摄像头视图"
+msgid "Front View"
+msgstr "正视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "透视"
+msgid "Top View"
+msgstr "顶视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "正交"
+msgid "Left Side View"
+msgstr "左视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "打印平台(&B)"
+msgid "Right Side View"
+msgstr "右视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "未连接至打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "配置 Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "打印机不接受命令"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "新增打印机(&A)..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "维护中。请检查打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "管理打印机(&I)..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "与打印机的连接中断"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "管理材料..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "打印中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "从市场添加更多材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "已暂停"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "使用当前设置 / 重写值更新配置文件（&U）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "初始化中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "舍弃当前更改（&D）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "请取出打印件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "从当前设置 / 重写值创建配置文件（&C）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "管理配置文件.."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "显示在线文档(&D)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "BUG 反馈(&B)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "新增功能"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "关于..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "删除模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "使模型居于平台中央（&N）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "绑定模型（&G）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "拆分模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "合并模型（&M）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "复制模型…（&M）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "选择所有模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "清空打印平台"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "重新载入所有模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "将所有模型编位到所有打印平台"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "编位所有的模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "为所选模型编位"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "复位所有模型的位置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "复位所有模型的变动"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "打开文件（&O）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "新建项目（&N）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "显示配置文件夹"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "配置设定可见性..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "市场(&M)"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "已计算"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "当前"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "单位"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "信息"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "确认直径更改"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "中止打印"
+msgid "Display Name"
+msgstr "显示名称"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "您确定要中止打印吗？"
+msgid "Material Type"
+msgstr "材料类型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "打印为支撑。"
+msgid "Color"
+msgstr "颜色"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "修改了与此模型重叠的其他模型。"
+msgid "Properties"
+msgstr "属性"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "修改了与该模型重叠的填充。"
+msgid "Density"
+msgstr "密度"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "不支持与此模型重叠。"
+msgid "Diameter"
+msgstr "直径"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "覆盖 %1 设置。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "耗材成本"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "对象列表"
+msgid "Filament weight"
+msgstr "耗材重量"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "耗材长度"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "每米成本"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "此材料与 %1 相关联，并共享其某些属性。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "解绑材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "描述"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "粘附信息"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "激活"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "创建"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "复制"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "导入"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "导出"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "确认删除"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "您确认要删除 %1？该操作无法恢复！"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "导入配置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "成功导入材料 <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "导出材料"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "成功导出材料至： <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "打印机"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "重命名"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "创建"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "复制"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "创建配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "请为此配置文件提供名称。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "复制配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "重命名配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "导入配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "导出配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "打印机：%1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "使用当前设置 / 重写值更新配置文件"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "此配置文件使用打印机指定的默认值，因此在下面的列表中没有此设置项。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "您当前的设置与选定的配置文件相匹配。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "全局设置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "设置可见性"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全部勾选"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "基本"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "接口"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "币种："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "主题："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "需重新启动 Cura，新的设置才能生效。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "当设置被更改时自动进行切片。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自动切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "视区行为"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "以红色突出显示模型需要增加支撑结构的区域。没有支撑，这些区域将无法正确打印。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "显示悬垂（Overhang）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "使用警告标志突出显示模型缺少或多余的表面。刀具路径常常是要打印的几何结构缺少的部分。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "显示模型错误"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "当模型被选中时，视角将自动调整到最合适的观察位置（模型处于正中央）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "当项目被选中时，自动对中视角"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "需要令 Cura 的默认缩放操作反转吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "反转视角变焦方向。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "是否跟随鼠标方向进行缩放？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "正交透视不支持通过鼠标进行缩放。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "跟随鼠标方向缩放"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "需要移动平台上的模型，使它们不再相交吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "确保每个模型都保持分离"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "需要转动模型，使它们接触打印平台吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自动下降模型到打印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "在 G-code 读取器中显示警告信息。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code 读取器中的警告信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "层视图要强制进入兼容模式吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "强制层视图兼容模式（需要重新启动）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura 是否应该在关闭的位置打开？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "恢复初始窗口位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "应使用哪种类型的摄像头进行渲染？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "摄像头渲染："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "透视"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "正交"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "打开并保存文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "应从桌面打开文件还是在同一 Cura 实例中打开外部应用程序？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "使用单个 Cura 实例"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "当模型的尺寸过大时，是否将模型自动缩小至成形空间体积？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "缩小过大模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "当模型以米而不是毫米为单位时，模型可能会在打印平台中显得非常小。在此情况下是否进行放大？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "放大过小模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "模型是否应该在加载后被选中？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "选择模型时加载"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "打印机名是否自动作为打印作业名称的前缀？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "将机器前缀添加到作业名称中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "保存项目文件时是否显示摘要？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "保存项目时显示摘要对话框"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "打开项目文件时的默认行为"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "打开项目文件时的默认行为： "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "总是询问"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "始终作为一个项目打开"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "始终导入模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "当您对配置文件进行更改并切换到其他配置文件时将显示一个对话框，询问您是否要保留修改。您也可以选择一个默认行为并令其不再显示该对话框。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "切换到不同配置文件时对设置值更改的默认操作： "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "总是舍失更改的设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "总是将更改的设置传输至新配置文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "隐私"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "当 Cura 启动时，是否自动检查更新？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "启动时检查更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "您愿意将关于您的打印数据以匿名形式发送到 Ultimaker 吗？注意：我们不会记录/发送任何模型、IP 地址或其他私人数据。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "（匿名）发送打印信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "详细信息"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "激活"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "重命名"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "创建"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "复制"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "导入"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "导出"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "确认删除"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "您确认要删除 %1？该操作无法恢复！"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "导入配置"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导入材料 <filename>%1</filename>： <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "查看类型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "成功导入材料 <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "未连接至打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "导出材料"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "打印机不接受命令"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "无法导出材料至 <filename>%1</filename>： <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "维护中。请检查打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "成功导出材料至： <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "与打印机的连接中断"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "信息"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "打印中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "确认直径更改"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "已暂停"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新的灯丝直径被设置为%1毫米，这与当前的挤出机不兼容。你想继续吗？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "初始化中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "显示名称"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "请取出打印件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "材料类型"
+msgid "Abort Print"
+msgstr "中止打印"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "颜色"
+msgid "Are you sure you want to abort the print?"
+msgstr "您确定要中止打印吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "属性"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "搜索设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "将值复制到所有挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "直径"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "将所有修改值复制到所有挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "耗材成本"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "隐藏此设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "耗材重量"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "不再显示此设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "耗材长度"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "保持此设置可见"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "每米成本"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"一些隐藏设置正在使用有别于一般设置的计算值。\n"
+"\n"
+"单击以使这些设置可见。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "此材料与 %1 相关联，并共享其某些属性。"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "解绑材料"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影响"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "描述"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "受影响项目"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "粘附信息"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "打印设置"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "此设置与挤出器特定值不同："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "创建"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"此设置的值与配置文件不同。\n"
+"\n"
+"单击以恢复配置文件的值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "复制"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "创建配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "请为此配置文件提供名称。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "复制配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "重命名配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "导入配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "导出配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "打印机：%1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "使用当前设置 / 重写值更新配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "舍弃当前更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "此配置文件使用打印机指定的默认值，因此在下面的列表中没有此设置项。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "您当前的设置与选定的配置文件相匹配。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "全局设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "已计算"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "设置"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"此设置通常可被自动计算，但其当前已被绝对定义。\n"
+"\n"
+"单击以恢复自动计算的值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "配置文件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D 视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "当前"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "正视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "单位"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "顶视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "设置可见性"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全部勾选"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右视图"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "挤出机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "该热端的当前温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "热端的预热温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "预热"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "打印前请预热热端。您可以在热端加热时继续调整打印机，而不必等待热端加热完毕再做好打印准备。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "该挤出机中材料的颜色。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "该挤出机中的材料。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "该挤出机所使用的喷嘴。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "打印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "热床的目标温度。热床将加热或冷却至此温度。若设置为 0，则不使用热床。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "热床当前温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "热床的预热温度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "打印前请预热热床。您可以在热床加热时继续调整相关项，让您在准备打印时不必等待热床加热完毕。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "打印机控制"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "垛齐位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "垛齐距离"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "发送 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "向连接的打印机发送自定义 G-code 命令。按“Enter”发送命令。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "尚未连接到打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "云打印机离线。请检查打印机是否已开启并连接到 Internet。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "此打印机未链接到您的帐户。请访问 Ultimaker Digital Factory 以建立连接。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "云连接当前不可用。请登录以连接到云打印机。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "云连接当前不可用。请检查您的 Internet 连接。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "添加打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "管理打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "已连接的打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "预设打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "正在打印"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "作业名"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "打印时间"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "预计剩余时间"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"某些设置/重写值与存储在配置文件中的值不同。\n"
-"\n"
-"点击打开配置文件管理器。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "自定义配置文件"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "没有 %1 配置文件可用于挤出器 %2 中的配置。将改为使用默认意图"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "打印设置已禁用。无法修改 G code 文件。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "推荐"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "自定义"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "开"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "关"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "实验性"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "附着"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "允许打印 Brim 或 Raft。这将在您的对象周围或下方添加一个容易切断的平面区域。"
+msgid "Is printed as support."
+msgstr "打印为支撑。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "渐层填充"
+msgid "Other models overlapping with this model are modified."
+msgstr "修改了与此模型重叠的其他模型。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐加大填充密度。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "您已修改部分配置文件设置。 如果您想对其进行更改，请转至自定义模式。"
+msgid "Infill overlapping with this model is modified."
+msgstr "修改了与该模型重叠的填充。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "支持"
+msgid "Overlaps with this model are not supported."
+msgstr "不支持与此模型重叠。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "在模型的悬垂（Overhangs）部分生成支撑结构。若不这样做，这些部分在打印时将倒塌。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "覆盖 %1 设置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"一些隐藏设置正在使用有别于一般设置的计算值。\n"
-"\n"
-"单击以使这些设置可见。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "市场"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "未使用此设置，因为受其影响的所有设置均已覆盖。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "编辑（&E）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影响"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "扩展(&X)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "受影响项目"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "偏好设置（&R）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "此设置始终在所有挤出机之间共享。在此处更改它将改变所有挤出机的值。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "帮助(&H)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "此设置与挤出器特定值不同："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新建项目"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"此设置的值与配置文件不同。\n"
-"\n"
-"单击以恢复配置文件的值。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "你确定要开始一个新项目吗？这将清除打印平台及任何未保存的设置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"此设置通常可被自动计算，但其当前已被绝对定义。\n"
-"\n"
-"单击以恢复自动计算的值。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "搜索设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "将值复制到所有挤出机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "将所有修改值复制到所有挤出机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "隐藏此设置"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "不再显示此设置"
+msgid "This package will be installed after restarting."
+msgstr "这个包将在重新启动后安装。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "保持此设置可见"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "设置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D 视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "正在关闭 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "正视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "您确定要退出 %1 吗？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "顶视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "安装包"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "打开文件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右视图"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "我们已经在您选择的文件中找到一个或多个 G-Code 文件。您一次只能打开一个 G-Code 文件。若需打开 G-Code 文件，请仅选择一个。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "查看类型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "新增打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "添加云打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新增功能"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "等待云响应"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "云打印机离线。请检查打印机是否已开启并连接到 Internet。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "在您的帐户中未找到任何打印机？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "此打印机未链接到您的帐户。请访问 Ultimaker Digital Factory 以建立连接。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "您帐户中的以下打印机已添加到 Cura 中："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "云连接当前不可用。请登录以连接到云打印机。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "手动添加打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "云连接当前不可用。请检查您的 Internet 连接。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "完成"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "制造商"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "配置文件作者"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "打印机名称"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "请为您的打印机命名"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "添加打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "添加已联网打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "添加未联网打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "未找到网络内打印机。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "管理打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "刷新"
+msgid "Connected printers"
+msgstr "已连接的打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "按 IP 添加打印机"
+msgid "Preset printers"
+msgstr "预设打印机"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "添加云打印机"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "用 %1 打印所选模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "故障排除"
+msgid "Time estimation"
+msgstr "预计时间"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "按 IP 地址添加打印机"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "输入您打印机的 IP 地址。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "添加"
+msgid "Material estimation"
+msgstr "预计材料"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "无法连接到设备。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "无法连接到 Ultimaker 打印机？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "该网络地址的打印机尚未响应。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "正在切片..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "由于是未知打印机或不是组内主机，无法添加该打印机。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "无法切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "返回"
+msgid "Processing"
+msgstr "正在处理中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "连接"
+msgid "Slice"
+msgstr "切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帐户"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "互连 3D 打印的特点"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- 借助更多的打印配置文件和插件定制您的体验"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- 通过同步设置并将其加载到任何位置保持灵活性"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- 使用 Ultimaker 打印机上的远程工作流提高效率"
+msgid "Start the slicing process"
+msgstr "开始切片流程"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "跳过"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "帮助我们改进 Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "无可用时间估计"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "为了改善打印质量和用户体验，Ultimaker Cura 会收集匿名数据，这些数据包括："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "无可用成本估计"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "机器类型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "预览"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "材料使用"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "提供可移动磁盘热插拔和写入文件的支持。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "切片数量"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "可移动磁盘输出设备插件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "打印设置"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura 收集的数据不会包含任何个人信息。"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "版本自 3.5 升级到 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "更多信息"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "将配置从 Cura 4.6.2 升级到 Cura 4.7。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "空"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "版本从 4.6.2 升级到 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "用户协议"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "将配置从 Cura 2.2 版本升级至 2.4 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒绝并关闭"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "版本自 2.2 升级到 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "欢迎使用 Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"请按照以下步骤设置\n"
-"Ultimaker Cura。此操作只需要几分钟时间。"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "版本自 4.2 升级至 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "开始"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "将配置从 Cura 4.6.0 升级到 Cura 4.6.2。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura 新增功能"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "版本从 4.6.0 升级到 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "模型检查器"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "版本自 3.0 升级到 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "提供对读取 3MF 格式文件的支持。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 读取器"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "版本自 4.0 升级到 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "提供对写入 3MF 文件的支持。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 写入器"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "版本自 2.6 升级到 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "提供对读取 AMF 文件的支持。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "将配置从 Cura 2.5 版本升级至 2.6 版本。"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 读取器"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "版本自 2.5 升级到 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "备份和还原配置。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 备份"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "版本自 4.1 升级到 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "提供 CuraEngine 切片后端的路径。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine 后端"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "版本自 2.1 升级到 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "提供了对导入 Cura 配置文件的支持。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 配置文件读取器"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "版本自 3.2 升级到 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "提供了对导出 Cura 配置文件的支持。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "将配置从 Cura 4.5 升级至 Cura 4.6。"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 配置文件写入器"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "版本从 4.5 升级至 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "检查以进行固件更新。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "固件更新检查程序"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "版本从 4.4 升级至 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "为固件更新提供操作选项。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "将配置从 Cura 4.7 升级到 Cura 4.8。"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "固件更新程序"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "将版本从 4.7 升级到 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "从压缩存档文件读取 G-code。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "从Cura 3.3升级到Cura 3.4。"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "压缩 G-code 读取器"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "版本升级3.3到3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "将 G-code 写入至压缩存档文件。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "压缩 G-code 写入器"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "版本自 4.3 升级至 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "提供了从 GCode 文件中导入配置文件的支持。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code 配置文件读取器"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "版本自 3.4 升级到 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "允许加载和显示 G-code 文件。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "将配置从 Cura 2.7 版本升级至 3.0 版本。"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code 读取器"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "版本自 2.7 升级到 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "将 G-code 写入至文件。"
+msgid "Provides support for reading AMF files."
+msgstr "提供对读取 AMF 文件的支持。"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code 写入器"
+msgid "AMF Reader"
+msgstr "AMF 读取器"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "提供了从 GCode 文件中导入配置文件的支持。"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "图像读取器"
+msgid "G-code Profile Reader"
+msgstr "G-code 配置文件读取器"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "支持从 Cura 旧版本导入配置文件。"
+msgid "Provides a machine actions for updating firmware."
+msgstr "为固件更新提供操作选项。"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "旧版 Cura 配置文件读取器"
+msgid "Firmware Updater"
+msgstr "固件更新程序"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
+msgid "Provides support for reading X3D files."
+msgstr "支持读取 X3D 文件。"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "打印机设置操作"
+msgid "X3D Reader"
+msgstr "X3D 读取器"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "在 Cura 中提供监视阶段。"
+msgid "Find, manage and install new Cura packages."
+msgstr "查找、管理和安装新的Cura包。"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "监视阶段"
+msgid "Toolbox"
+msgstr "工具箱"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5597,75 +5710,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "后期处理"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "在 Cura 中提供准备阶段。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "提供 CuraEngine 切片后端的路径。"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "准备阶段"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine 后端"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "在 Cura 中提供预览阶段。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "预览阶段"
+msgid "USB printing"
+msgstr "USB 联机打印"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "提供可移动磁盘热插拔和写入文件的支持。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "提供了对导出 Cura 配置文件的支持。"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "可移动磁盘输出设备插件"
+msgid "Cura Profile Writer"
+msgstr "Cura 配置文件写入器"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "记录某些事件，以使其可供崩溃报告器使用"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "管理与 Ultimaker 网络打印机的网络连接。"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentry 日志记录"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 网络连接"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "提供仿真视图。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "仿真视图"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 打印机操作"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
+msgid "Provides support for reading 3MF files."
+msgstr "提供对读取 3MF 格式文件的支持。"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "切片信息"
+msgid "3MF Reader"
+msgstr "3MF 读取器"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "提供一个基本的实体网格视图。"
+msgid "Writes g-code to a compressed archive."
+msgstr "将 G-code 写入至压缩存档文件。"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "实体视图"
+msgid "Compressed G-code Writer"
+msgstr "压缩 G-code 写入器"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "从压缩存档文件读取 G-code。"
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "压缩 G-code 读取器"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "检查模型和打印配置，以了解潜在的打印问题并给出建议。"
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "模型检查器"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "检查以进行固件更新。"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "固件更新检查程序"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "允许加载和显示 G-code 文件。"
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-code 读取器"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5677,16 +5830,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "支持橡皮擦"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "查找、管理和安装新的Cura包。"
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "工具箱"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5697,6 +5840,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh 阅读器"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "记录某些事件，以使其可供崩溃报告器使用"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentry 日志记录"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5707,265 +5860,250 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP 读取器"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "支持写入 Ultimaker 格式包。"
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 写入器"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "为最后的机器提供机器操作（例如，热床调平向导，选择升级等）。"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "支持从 Cura 旧版本导入配置文件。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 打印机操作"
+msgid "Legacy Cura Profile Reader"
+msgstr "旧版 Cura 配置文件读取器"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "管理与 Ultimaker 网络打印机的网络连接。"
+msgid "Provides a prepare stage in Cura."
+msgstr "在 Cura 中提供准备阶段。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 网络连接"
+msgid "Prepare Stage"
+msgstr "准备阶段"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "接受 G-Code 并将其发送到一台打印机。 插件也可以更新固件。"
+msgid "Provides a monitor stage in Cura."
+msgstr "在 Cura 中提供监视阶段。"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 联机打印"
+msgid "Monitor Stage"
+msgstr "监视阶段"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "将配置从 Cura 2.1 版本升级至 2.2 版本。"
+msgid "Provides the X-Ray view."
+msgstr "提供透视视图。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "版本自 2.1 升级到 2.2"
+msgid "X-Ray View"
+msgstr "透视视图"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "将配置从 Cura 2.2 版本升级至 2.4 版本。"
+msgid "Provides support for writing 3MF files."
+msgstr "提供对写入 3MF 文件的支持。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "版本自 2.2 升级到 2.4"
+msgid "3MF Writer"
+msgstr "3MF 写入器"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "将配置从 Cura 2.5 版本升级至 2.6 版本。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "提交匿名切片信息。 可以通过偏好设置禁用。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "版本自 2.5 升级到 2.6"
+msgid "Slice info"
+msgstr "切片信息"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "将配置从 Cura 2.6 版本升级至 2.7 版本。"
+msgid "Provides a preview stage in Cura."
+msgstr "在 Cura 中提供预览阶段。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "版本自 2.6 升级到 2.7"
+msgid "Preview Stage"
+msgstr "预览阶段"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "将配置从 Cura 2.7 版本升级至 3.0 版本。"
+msgid "Provides the Simulation view."
+msgstr "提供仿真视图。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "版本自 2.7 升级到 3.0"
+msgid "Simulation View"
+msgstr "仿真视图"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "将配置从 Cura 3.0 版本升级至 3.1 版本。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "提供一种改变机器设置的方法（如构建体积、喷嘴大小等）。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "版本自 3.0 升级到 3.1"
+msgid "Machine Settings Action"
+msgstr "打印机设置操作"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "将配置从 Cura 3.2 版本升级至 3.3 版本。"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "提供读取和写入基于 XML 的材料配置文件的功能。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "版本自 3.2 升级到 3.3"
+msgid "Material Profiles"
+msgstr "材料配置文件"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "从Cura 3.3升级到Cura 3.4。"
+msgid "Provides a normal solid mesh view."
+msgstr "提供一个基本的实体网格视图。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "版本升级3.3到3.4"
+msgid "Solid View"
+msgstr "实体视图"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "将配置从 Cura 3.4 版本升级至 3.5 版本。"
+msgid "Provides support for importing Cura profiles."
+msgstr "提供了对导入 Cura 配置文件的支持。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "版本自 3.4 升级到 3.5"
+msgid "Cura Profile Reader"
+msgstr "Cura 配置文件读取器"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "将配置从 Cura 3.5 版本升级至 4.0 版本。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "支持写入 Ultimaker 格式包。"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "版本自 3.5 升级到 4.0"
+msgid "UFP Writer"
+msgstr "UFP 写入器"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "将配置从 Cura 4.0 版本升级至 4.1 版本。"
+msgid "Writes g-code to a file."
+msgstr "将 G-code 写入至文件。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "版本自 4.0 升级到 4.1"
+msgid "G-code Writer"
+msgstr "G-code 写入器"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "请将配置从 Cura 4.1 升级至 Cura 4.2。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "支持从 2D 图像文件生成可打印几何模型的能力。"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "版本自 4.1 升级到 4.2"
+msgid "Image Reader"
+msgstr "图像读取器"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "请将配置从 Cura 4.2 升级至 Cura 4.3。"
+msgid "Backup and restore your configuration."
+msgstr "备份和还原配置。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "版本自 4.2 升级至 4.3"
+msgid "Cura Backups"
+msgstr "Cura 备份"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "将配置从 Cura 4.3 升级至 Cura 4.4。"
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "缺少全局堆栈。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "版本自 4.3 升级至 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "您的模型不是流形。突出显示的区域指示缺少或多余的表面。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "将配置从 Cura 4.4 升级至 Cura 4.5。"
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "模型错误"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "版本从 4.4 升级至 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "层厚度"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "将配置从 Cura 4.5 升级至 Cura 4.6。"
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "互连 3D 打印的特点"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "版本从 4.5 升级至 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- 借助更多的打印配置文件和插件定制您的体验\n"
+#~ "- 通过同步设置并将其加载到任何位置保持灵活性\n"
+#~ "- 使用 Ultimaker 打印机上的远程工作流提高效率"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "将配置从 Cura 4.6.0 升级到 Cura 4.6.2。"
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "创建账户"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "版本从 4.6.0 升级到 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "删除所选模型"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "将配置从 Cura 4.6.2 升级到 Cura 4.7。"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "居中所选模型"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "版本从 4.6.2 升级到 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "复制所选模型"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "将配置从 Cura 4.7 升级到 Cura 4.8。"
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "完成"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "将版本从 4.7 升级到 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker 帐户"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "支持读取 X3D 文件。"
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "互连 3D 打印的特点"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 读取器"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- 借助更多的打印配置文件和插件定制您的体验"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "提供读取和写入基于 XML 的材料配置文件的功能。"
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- 通过同步设置并将其加载到任何位置保持灵活性"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "材料配置文件"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- 使用 Ultimaker 打印机上的远程工作流提高效率"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "提供透视视图。"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "请按照以下步骤设置\n"
+#~ "Ultimaker Cura。此操作只需要几分钟时间。"
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "透视视图"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Ultimaker Cura 新增功能"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/zh_CN/fdmextruder.def.json.po b/resources/i18n/zh_CN/fdmextruder.def.json.po
index f75b2d93f1..bf950a0d34 100644
--- a/resources/i18n/zh_CN/fdmextruder.def.json.po
+++ b/resources/i18n/zh_CN/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: PCDotFan <pc@edu.ax>, Bothof <info@bothof.nl>\n"
diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po
index 0e1d82a9b4..2db31e589c 100644
--- a/resources/i18n/zh_CN/fdmprinter.def.json.po
+++ b/resources/i18n/zh_CN/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Chinese <info@lionbridge.com>, PCDotFan <pc@edu.ax>, Chinese <info@bothof.nl>\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "挤出器是否共用一个加热器，而不是每个挤出器都有自己的加热器。"
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "不允许区域"
@@ -487,8 +507,8 @@ msgstr "挤出机偏移量"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "将挤出机偏移量应用到坐标轴系统。"
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "第一层走线宽度乘数。 增大此乘数可改善热床粘着。"
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "外壳"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "插入外壁后的空驶距离，旨在更好地隐藏 Z 缝。"
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "顶部皮肤挤出机"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "用于打印最顶部皮肤的挤出机组。 用于多重挤出。"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "顶部表面皮肤层"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "最顶部皮肤层数。 通常只需一层最顶层就足以生成较高质量的顶部表面。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "顶部/底部挤出机"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "用于打印顶部和底部皮肤的挤出机组。 用于多重挤出。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "顶层 / 底层厚度"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "打印品中顶层/底层的厚度。 该值除以层高定义顶层/底层的数量。"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "顶层厚度"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "打印品中顶层的厚度。 该值除以层高定义顶层的数量。"
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "顶部层数"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "顶层的数量。 在按顶层厚度计算时，该值舍入为整数。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "底层厚度"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "打印品中底层的厚度。 此值除以层高定义底层数量。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "底部层数"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "底层的数量。 在按底层厚度计算时，该值舍入为整数。"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "初始底层数"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "从构建板向上算起的初始底层数。在按底层厚度计算时，该值四舍五入为整数。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "顶部 / 底部走线图案"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "顶层/底层图案。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "直线"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "同心圆"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "锯齿状"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "底层图案起始层"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "打印品底部第一层上的图案。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "直线"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "同心圆"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "锯齿状"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "连接顶部/底部多边形"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "在顶部/底部皮肤路径互相紧靠运行的地方连接它们。对于同心图案，启用此设置可大大减少空驶时间，但由于连接可在填充中途发生，此功能可能会降低顶部表面质量。"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "顶层/底层走线方向"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "当顶层/底层采用线条或锯齿状图案时使用的整数走线方向的列表。 列表中的元素随层的进度依次使用，当达到列表末尾时，它将从头开始。 列表项以逗号分隔，整个列表包含在方括号中。 默认是一个空列表，即意味着使用传统的默认角度（45 和 135 度）。"
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "外壁嵌入"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "启用时，Z 缝坐标为相对于各个部分中心的值。 禁用时，坐标定义打印平台上的一个绝对位置。"
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "顶部皮肤挤出机"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "用于打印最顶部皮肤的挤出机组。 用于多重挤出。"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "顶部表面皮肤层"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "最顶部皮肤层数。 通常只需一层最顶层就足以生成较高质量的顶部表面。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "顶部/底部挤出机"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "用于打印顶部和底部皮肤的挤出机组。 用于多重挤出。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "顶层 / 底层厚度"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "打印品中顶层/底层的厚度。 该值除以层高定义顶层/底层的数量。"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "顶层厚度"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "打印品中顶层的厚度。 该值除以层高定义顶层的数量。"
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "顶部层数"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "顶层的数量。 在按顶层厚度计算时，该值舍入为整数。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "底层厚度"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "打印品中底层的厚度。 此值除以层高定义底层数量。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "底部层数"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "底层的数量。 在按底层厚度计算时，该值舍入为整数。"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "初始底层数"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "从构建板向上算起的初始底层数。在按底层厚度计算时，该值四舍五入为整数。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "顶部 / 底部走线图案"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "顶层/底层图案。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "直线"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "同心圆"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "锯齿状"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "底层图案起始层"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "打印品底部第一层上的图案。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "直线"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "同心圆"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "锯齿状"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "连接顶部/底部多边形"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "在顶部/底部皮肤路径互相紧靠运行的地方连接它们。对于同心图案，启用此设置可大大减少空驶时间，但由于连接可在填充中途发生，此功能可能会降低顶部表面质量。"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "顶层/底层走线方向"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "当顶层/底层采用线条或锯齿状图案时使用的整数走线方向的列表。 列表中的元素随层的进度依次使用，当达到列表末尾时，它将从头开始。 列表项以逗号分隔，整个列表包含在方括号中。 默认是一个空列表，即意味着使用传统的默认角度（45 和 135 度）。"
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Z 间隙内无表层"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "调整壁和皮肤中心线的（端点）之间的重叠量。稍微重叠可让各个壁与皮肤牢固连接。请注意，对于相等的皮肤和壁线宽度，任何超过壁宽度一半的值可能已经导致任何皮肤越过壁，因为在该点，皮肤挤出机的喷嘴位置可能已经达到越过壁中间的位置。"
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "肤移除宽度"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "将被移除的皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部/底部皮肤时所耗用的时间和材料。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "顶部皮肤移除宽度"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "将被移除的顶部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部皮肤时所耗用的时间和材料。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "底部皮肤移除宽度"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "将被移除的底部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印底部皮肤时所耗用的时间和材料。"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "皮肤扩展距离"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让相邻层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "顶部皮肤扩展距离"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "顶部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让上方层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "底部皮肤扩展距离"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "底部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让皮肤与下面层的壁更好地粘着。 较低的值将节省所用的材料量。"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "最大扩展皮肤角度"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "最小扩展皮肤宽度"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "如果皮肤区域宽度小于此值，则不会扩展。 这会避免扩展在模型表面的坡度接近垂直时所形成的狭窄皮肤区域。"
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "填充"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "添加内填充的内部覆盖的最小角度。在一个0的值中，完全填满了填充，90将不提供任何填充。"
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "肤移除宽度"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "将被移除的皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部/底部皮肤时所耗用的时间和材料。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "顶部皮肤移除宽度"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "将被移除的顶部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部皮肤时所耗用的时间和材料。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "底部皮肤移除宽度"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "将被移除的底部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印底部皮肤时所耗用的时间和材料。"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "皮肤扩展距离"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让相邻层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "顶部皮肤扩展距离"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "顶部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让上方层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "底部皮肤扩展距离"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "底部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让皮肤与下面层的壁更好地粘着。 较低的值将节省所用的材料量。"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "最大扩展皮肤角度"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "如果模型的顶部和/或底部表面的角度大于此设置，则不要扩展其顶部/底部皮肤。 这会避免扩展在模型表面有接近垂直的坡度时所形成的狭窄皮肤区域。 0° 的角为水平，90° 的角为垂直。"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "最小扩展皮肤宽度"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "如果皮肤区域宽度小于此值，则不会扩展。 这会避免扩展在模型表面的坡度接近垂直时所形成的狭窄皮肤区域。"
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "皮肤边缘支撑厚度"
@@ -2561,8 +2591,8 @@ msgstr "起始层速度"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "起始层的速度。 建议采用较低的值以便改善与打印平台的粘着。"
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,8 +5105,8 @@ msgstr "网格处理等级"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "在考虑多个重叠的填充网格时确定此网格的优先级。其中有多个填充网格重叠的区域将采用等级最低的网格的设置。具有较高顺序的填充网格将修改具有较低顺序的填充网格和普通网格的填充。"
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "在悬垂变得可打印后悬垂的最大角度。 当该值为 0° 时，所有悬垂将被与打印平台连接的模型的一个部分替代，如果为 90° 时，不会以任何方式更改模型。"
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "启用滑行"
@@ -6362,6 +6402,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "在将模型从文件中载入时应用在模型上的转换矩阵。"
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "将挤出机偏移量应用到坐标轴系统。"
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "外壳"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "如果模型的顶部和/或底部表面的角度大于此设置，则不要扩展其顶部/底部皮肤。 这会避免扩展在模型表面有接近垂直的坡度时所形成的狭窄皮肤区域。 0° 的角为水平，90° 的角为垂直。"
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "起始层的速度。 建议采用较低的值以便改善与打印平台的粘着。"
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "在考虑多个重叠的填充网格时确定此网格的优先级。其中有多个填充网格重叠的区域将采用等级最低的网格的设置。具有较高顺序的填充网格将修改具有较低顺序的填充网格和普通网格的填充。"
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "用于加热打印平台的温度。如果该值为 0，将不会调整热床。"
diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po
index 701348a5cd..7ae52817fb 100644
--- a/resources/i18n/zh_TW/cura.po
+++ b/resources/i18n/zh_TW/cura.po
@@ -1,13 +1,13 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 # Ruben Dulek <r.dulek@ultimaker.com>, 2020.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-01 16:58+0800\n"
 "Last-Translator: Zhang Heh Ji <dinowchang@gmail.com>\n"
 "Language-Team: Zhang Heh Ji <dinowchang@gmail.com>\n"
@@ -18,155 +18,188 @@ msgstr ""
 "Plural-Forms: nplurals=1; plural=0;\n"
 "X-Generator: Poedit 2.3\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "未知"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "正在載入印表機..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "下列印表機因為是群組的一部份導致無法連接"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "正在設定偏好設定..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "可用的網路印表機"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "正在初始化啟用的機器..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "不覆寫"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "正在初始化機器管理員..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "你確定要移除 {0} 嗎？這動作無法復原！"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "正在初始化列印範圍..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "預設值"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "正在設定場景..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "外觀"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "正在載入介面..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "外觀參數是設計來列印較高品質形狀和表面的視覺性原型和模型。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "正在初始化引擎..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "工程"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "工程參數是設計來列印較高精度和較小公差的功能性原型和實際使用零件。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "一次只能載入一個 G-code 檔案。{0} 已跳過匯入"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "草稿"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "警告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "草稿參數是設計來縮短時間，快速列印初始原型和概念驗證。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "如果載入 G-code，則無法開啟其他任何檔案。{0} 已跳過匯入"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "錯誤"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "你確定要移除 {0} 嗎？這動作無法復原！"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "自訂耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "自訂"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "預設值"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "未知"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "自訂列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "所有支援的類型 ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "所有檔案 (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "登入失敗"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "正在為物件尋找新位置"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "尋找位置中"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "外觀"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "無法在列印範圍內放下全部物件"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "外觀參數是設計來列印較高品質形狀和表面的視覺性原型和模型。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "無法找到位置"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "工程"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "無法從使用者資料目錄建立備份檔：{}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "工程參數是設計來列印較高精度和較小公差的功能性原型和實際使用零件。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "備份"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "草稿"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "嘗試復原沒有正確資料或 meta data 的 Cura 備份。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "草稿參數是設計來縮短時間，快速列印初始原型和概念驗證。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "嘗試復原的 Cura 備份的版本比目前的軟體版本新。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "下列印表機因為是群組的一部份導致無法連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "由於「列印序列」設定的值，成形列印範圍高度已被減少，以防止龍門與列印模型相衝突。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "可用的網路印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "列印範圍"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "不覆寫"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura 無法啟動"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -181,32 +214,32 @@ msgstr ""
 "                    <p>請將錯誤報告傳送給我們以修正此問題。</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "傳送錯誤報告給 Ultimaker"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "顯示詳細的錯誤報告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "顯示設定資料夾"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "備份和重置設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "錯誤報告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -217,1147 +250,848 @@ msgstr ""
 "            <p>請用\"送出報告\"按鈕自動發出一份錯誤報告到我們的伺服器</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "系統資訊"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "未知"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Cura 語言"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "作業系統語言"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt 版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "尚未初始化<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL 版本：{version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL 供應商：{vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL 渲染器：{renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "錯誤追溯"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "日誌"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "送出報告"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "正在載入印表機..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "正在設定偏好設定..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "正在初始化啟用的機器..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "正在初始化機器管理員..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "正在初始化列印範圍..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "正在設定場景..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "正在載入介面..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "正在初始化引擎..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "一次只能載入一個 G-code 檔案。{0} 已跳過匯入"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "警告"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "如果載入 G-code，則無法開啟其他任何檔案。{0} 已跳過匯入"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Error"
-msgstr "錯誤"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "正在複製並放置模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "正在放置模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "擺放物件中"
+msgid "Login failed"
+msgstr "登入失敗"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "雲端沒有讀取回應。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "無法開始新的登入程序。檢查是否有其他登入仍在進行中。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "無法連上 Ultimaker 帳號伺服器。"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "提供的狀態不正確。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "核准此應用程式時，請給予所需的權限。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "嘗試登入時出現意外狀況，請再試一次。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "無法開始新的登入程序。檢查是否有其他登入仍在進行中。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "無法連上 Ultimaker 帳號伺服器。"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "檔案已經存在"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "檔案 <filename>{0}</filename> 已存在。你確定要覆蓋掉它嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "無效的檔案網址："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "噴頭"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "設定已被更改為符合目前擠出機："
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "設定更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "擠出機已停用"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "無法將列印參數匯出至 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "無法將列印參數匯出至 <filename>{0}</filename>：寫入器外掛報告故障。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "列印參數已匯出至：<filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "匯出成功"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "無法從 <filename>{0}</filename> 匯入列印參數：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "在加入印表機前，無法從 <filename>{0}</filename> 匯入列印參數。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "檔案 <filename>{0}</filename> 內沒有自訂列印參數可匯入"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "列印參數 <filename>{0}</filename> 含有不正確的資料，無法匯入。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "從 <filename>{0}</filename> 匯入列印參數失敗："
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "已成功匯入列印參數 {0}。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "檔案 {0} 內未含有效的列印參數。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "列印參數 {0} 檔案類型未知或已損壞。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "自訂列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "列印參數缺少列印品質類型定義。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "全域堆疊遺失。"
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "無法新增列印參數。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "品質類型 '{0}' 與目前的啟用的機器設定 '{1} '不相容。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "警告：列印參數無法顯示，因為它的品質類型 '{0}' 無法在目前設定使用。切換到可使用此品質類型的耗材/噴頭組合。"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "不支援"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "預設值"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "噴頭"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "設定已被更改為符合目前擠出機："
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "正在為物件尋找新位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "設定更新"
+msgid "Finding Location"
+msgstr "尋找位置中"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "無法在列印範圍內放下全部物件"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "擠出機已停用"
+msgid "Can't Find Location"
+msgstr "無法找到位置"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "群組 #{group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "增加"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "完成"
+msgid "Close"
+msgstr "關閉"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "取消"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "群組 #{group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "完成"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "外壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "內壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "表層"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "支撐填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "支撐介面"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "支撐"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "外圍"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "裝填塔"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "移動"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "回抽"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "其它"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "下一步"
+msgid "Add"
+msgstr "增加"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "關閉"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D 模型助手"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>由於模型尺寸和耗材設定的原因，一個或多個模型無法在最佳情狀下列印</p>\n"
-"<p>{model_names}</p>\n"
-"<p>了解如何確保最佳的列印品質和可靠性。</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">閱讀列印品質指南</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "專案檔案 <filename>{0}</filename> 包含未知的機器類型 <message>{1}</message>。機器無法被匯入，但模型將被匯入。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "開啟專案檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "專案檔案 <filename>{0}</filename> 無法存取：<message>{1}</message>。"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "由於「列印序列」設定的值，成形列印範圍高度已被減少，以防止龍門與列印模型相衝突。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "無法開啟專案檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "專案檔案 <filename>{0}</filename> 使用了此版本 Ultimaker Cura 未知的參數製作。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "推薦"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "自訂選項"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF 寫入器外掛已損壞。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "沒有寫入此處工作區的權限。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "操作系統不允許將專案檔案儲存到此位置或儲存為此檔名。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "寫入 3mf 檔案發生錯誤。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura 專案 3MF 檔案"
+msgid "Build Volume"
+msgstr "列印範圍"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF 檔案"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "無法從使用者資料目錄建立備份檔：{}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Backups"
+msgid "Backup"
 msgstr "備份"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "上傳你的備份時發生錯誤。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "正在建立備份..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "建立備份時發生了錯誤。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "正在上傳你的備份..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "你的備份上傳完成。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "備份超過了最大檔案大小。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "嘗試恢復備份時發生錯誤。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "管理備份"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "無法使用目前耗材切片，因為它與所選機器或設定不相容。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
-msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "無法切片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "無法使用目前設定進行切片。以下設定存在錯誤：{0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "因部份模型設定問題無法進行切片。部份模型的下列設定有錯誤：{error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "無法切片（原因：換料塔或主位置無效）。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "有物件使用了被停用的擠出機 %s ，因此無法進行切片。"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "嘗試復原沒有正確資料或 meta data 的 Cura 備份。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"請檢查設定並檢查你的模型是否：\n"
-"- 適合列印範圍\n"
-"- 分配了一個已啟用的擠出機\n"
-"- 沒有全部設定成修改網格"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "嘗試復原的 Cura 備份的版本比目前的軟體版本新。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "正在處理層"
+msgid "Multiplying and placing objects"
+msgstr "正在複製並放置模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "資訊"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura 列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "無法存取更新資訊。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "可能有適用於你的 {machine_name} 的新功能或錯誤修正！假如尚未使用最新版本，建議更新你印表機的韌體到版本 {latest_version}。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "有新 %s 韌體可用"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "如何更新"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "更新韌體"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "壓縮 G-code 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "G-code GZ 寫入器不支援非文字模式。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "正在解析 G-code"
+msgid "Placing Objects"
+msgstr "正在放置模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-code 細項設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "發送檔案之前，請確保 G-code 適用於目前印表機和印表機設定。目前 G-code 檔案可能不準確。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "G-code 寫入器不支援非文字模式。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "匯出前請先將 G-code 準備好。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG 圖片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG 圖片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG 圖片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP 圖片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF 圖片"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04 列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "印表機設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "監控"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "單一模型設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "設定對每個模型的單獨設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "後處理"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "修改 G-Code 檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "準備"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "預覽"
+msgid "Placing Object"
+msgstr "擺放物件中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "儲存至行動裝置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "儲存到行動裝置 {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "沒有可供寫入的檔案格式！"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "正在儲存到行動裝置 <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "儲存中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "無法儲存到 <filename>{0}</filename>：<message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "嘗試寫入到 {device} 時無法找到檔名。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "無法儲存到行動裝置 {0}：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "儲存到行動裝置 {0}：{1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "檔案已儲存"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "卸載"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "卸載行動裝置 {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "已卸載 {0}。現在你可以安全地移除行動裝置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "安全移除硬體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "無法卸載 {0}，可能有其它程式正在使用行動裝置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "行動裝置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "當鐵絲網列印（Wire Printing）功能開啟時，Cura 將無法準確地顯示列印層。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "模擬檢視"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "因為你還沒切片，沒有東西可顯示。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "沒有列印層可顯示"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "不要再顯示這個訊息"
-
-# Added manually to fix a string that was changed after string freeze.
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "分層檢視"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "模型沒有封閉，標示的區域有缺少或多餘的表面。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "模型錯誤"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "實體檢視"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "支撐阻斷器"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "建立一塊不列印支撐的空間。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "你要使用你的帳號同步耗材資料和軟體套件嗎？"
+msgid "AMF File"
+msgstr "AMF 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "從你的 Ultimaker 帳號偵測到資料更動"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "同步"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "更新韌體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "同步中..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "拒絕"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "同意"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "外掛授權協議"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "拒絕並從帳號中刪除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "下載外掛 {} 失敗"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "同步中..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "從你的 Ultimaker 帳號偵測到資料更動"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "你需要結束並重新啟動 {} ，更動才能生效。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "下載外掛 {} 失敗"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "你要使用你的帳號同步耗材資料和軟體套件嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Open Compressed Triangle Mesh"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "同步"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "單一模型設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Binary"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "設定對每個模型的單獨設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF Embedded JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "後處理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford Triangle Format"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "修改 G-Code 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Compressed COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "無法使用目前耗材切片，因為它與所選機器或設定不相容。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker 格式的封包"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "無法切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "無法寫入 UFP 檔案："
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "無法使用目前設定進行切片。以下設定存在錯誤：{0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "調平列印平台"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "因部份模型設定問題無法進行切片。部份模型的下列設定有錯誤：{error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "選擇升級"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "無法切片（原因：換料塔或主位置無效）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "透過雲端服務列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "有物件使用了被停用的擠出機 %s ，因此無法進行切片。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "透過雲端服務列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"請檢查設定並檢查你的模型是否：\n"
+"- 適合列印範圍\n"
+"- 分配了一個已啟用的擠出機\n"
+"- 沒有全部設定成修改網格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "透過雲端服務連接"
+msgid "Processing Layers"
+msgstr "正在處理層"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "不明上傳列印作業錯誤代碼：{0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "資訊"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB 連線列印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "透過 USB 連線列印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "透過 USB 連線列印"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "透過 USB 連接"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB 列印正在進行中，關閉 Cura 將停止此列印工作。你確定要繼續嗎？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "列印仍在進行中。列印完成前，Cura 無法透過 USB 開始另一次列印。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "列印正在進行中"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura 列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "透過網路連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "從你的 Ultimaker 帳號偵測到新的印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "從你的帳號新增印表機 {name} （{model}）"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
 msgstr[0] "… 和 {0} 其他"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "從 Digital Factory 新增的印表機："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "印表機無法使用雲端連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "印表機未連到 Digital Factory："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "要建立連線，請前往 {website_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "保留印表機設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "移除印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} 將被移除，直到下次帳號同步之前。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "要永久移除 {printer_name}，請前往 {digital_factory_link}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "你確定要暫時移除 {printer_name} 嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "移除印表機？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1370,7 +1104,7 @@ msgstr[0] ""
 "你將從 Cura 移除 {0} 印表機。此動作無法復原。\n"
 "你確定要繼續嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1379,2087 +1113,2481 @@ msgstr ""
 "你將從 Cura 移除所有印表機。此動作無法復原。\n"
 "你確定要繼續嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "利用你的 Ultimaker 帳號在任何地方傳送和監控列印作業。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "透過雲端服務列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "連接到 Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "透過雲端服務列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "開始"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "透過雲端服務連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "不明上傳列印作業錯誤代碼：{0}"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "你正在嘗試連接到一台未安裝 Ultimaker Connect 的印表機。請將印表機更新至最新版本的韌體。"
+msgid "tomorrow"
+msgstr "明天"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "更新你印表機"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "今天"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura 偵測到群組 {0} 的管理主機上未安裝的耗材參數。"
+msgid "Sending Print Job"
+msgstr "正在傳送列印作業"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "向印表機傳送耗材參數中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "正在上傳列印作業到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "你正在嘗試連接到 {0}，但它不是印表機群組的管理者。你可以透過網頁將其設定為印表機群組的管理者。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "不是印表機群組管理者"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "設定印表機群組"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "利用你的 Ultimaker 帳號在任何地方傳送和監控列印作業。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "連接到 Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "開始"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "請等待目前作業傳送完成。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "列印錯誤"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "雲端服務未上傳資料到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "網路錯誤"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "正在傳送列印作業"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura 偵測到群組 {0} 的管理主機上未安裝的耗材參數。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "正在上傳列印作業到印表機。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "向印表機傳送耗材參數中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "列印作業隊列已滿，印表機無法再接受新的作業。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "隊列已滿"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "列印作業已成功傳送到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "資料傳送"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "你正在嘗試連接到一台未安裝 Ultimaker Connect 的印表機。請將印表機更新至最新版本的韌體。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "更新你印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "網路連線列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "網路連線列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "透過網路連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "透過網路連接"
+msgid "Select upgrades"
+msgstr "選擇升級"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "明天"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "調平列印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "今天"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "推薦"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB 連線列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "自訂選項"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "透過 USB 連線列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "專案檔案 <filename>{0}</filename> 包含未知的機器類型 <message>{1}</message>。機器無法被匯入，但模型將被匯入。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "透過 USB 連線列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "開啟專案檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "透過 USB 連接"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "專案檔案 <filename>{0}</filename> 無法存取：<message>{1}</message>。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB 列印正在進行中，關閉 Cura 將停止此列印工作。你確定要繼續嗎？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "無法開啟專案檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "列印仍在進行中。列印完成前，Cura 無法透過 USB 開始另一次列印。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "列印正在進行中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "專案檔案 <filename>{0}</filename> 使用了此版本 Ultimaker Cura 未知的參數製作。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D 檔案"
+msgid "3MF File"
+msgstr "3MF 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "透視檢視"
+msgid "Compressed G-code File"
+msgstr "壓縮 G-code 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "此列印可能會有些問題。點擊查看調整提示。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "G-code GZ 寫入器不支援非文字模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "開啟專案"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D 模型助手"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "更新已有設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>由於模型尺寸和耗材設定的原因，一個或多個模型無法在最佳情狀下列印</p>\n"
+"<p>{model_names}</p>\n"
+"<p>了解如何確保最佳的列印品質和可靠性。</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">閱讀列印品質指南</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "新建設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "無法存取更新資訊。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "摘要 - Cura 專案"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "可能有適用於你的 {machine_name} 的新功能或錯誤修正！假如尚未使用最新版本，建議更新你印表機的韌體到版本 {latest_version}。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "印表機設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "有新 %s 韌體可用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "如何解決機器的設定衝突？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "如何更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "類型"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "印表機群組"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "正在解析 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "列印參數設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-code 細項設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "發送檔案之前，請確保 G-code 適用於目前印表機和印表機設定。目前 G-code 檔案可能不準確。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "支撐阻斷器"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "如何解决列印參數中的設定衝突？"
+msgid "Create a volume in which supports are not printed."
+msgstr "建立一塊不列印支撐的空間。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "名稱"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Open Compressed Triangle Mesh"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "意圖"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "不在列印參數中"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Binary"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 覆寫"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF Embedded JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "衍生自"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford Triangle Format"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 覆寫"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "耗材設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker 格式的封包"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "如何解决耗材的設定衝突？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04 列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "參數顯示設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "準備"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "模式"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "監控"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "顯示設定："
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "透視檢視"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 / %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "寫入 3mf 檔案發生錯誤。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "載入專案時將清除列印平台上的所有模型。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "開啟"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura 專案 3MF 檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "想要更多？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF 寫入器外掛已損壞。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "立即備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "沒有寫入此處工作區的權限。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "自動備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "操作系統不允許將專案檔案儲存到此位置或儲存為此檔名。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "每天啟動 Cura 時自動建立備份。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "預覽"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "復原"
+# Added manually to fix a string that was changed after string freeze.
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "分層檢視"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "刪除備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "當鐵絲網列印（Wire Printing）功能開啟時，Cura 將無法準確地顯示列印層。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "你確定要刪除此備份嗎？ 這動作無法復原。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "模擬檢視"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "復原備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "因為你還沒切片，沒有東西可顯示。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "在復原備份之前，你需要重新啟動 Cura。 你想要現在關閉 Cura 嗎？"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "沒有列印層可顯示"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura 版本"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "不要再顯示這個訊息"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "印表機"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "印表機設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "耗材"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "實體檢視"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "參數"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "外掛"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura 備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "我的備份"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "無法寫入 UFP 檔案："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "你目前沒有任何備份。 使用「立即備份」按鈕建立一個。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "G-code 寫入器不支援非文字模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "在預覽階段限制只能顯示 5 個備份。 刪除備份以顯示較舊的備份。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "匯出前請先將 G-code 準備好。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "備份並同步你的 Cura 設定。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG 圖片"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "登入"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG 圖片"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG 圖片"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP 圖片"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF 圖片"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "嘗試恢復備份時發生錯誤。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "備份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "上傳你的備份時發生錯誤。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "正在建立備份..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "建立備份時發生了錯誤。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "正在上傳你的備份..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "你的備份上傳完成。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "備份超過了最大檔案大小。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "管理備份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "更新韌體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "韌體是直接在 3D 印表機上運行的一個軟體。此韌體控制步進馬達，調節溫度讓印表機正常運作。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "新印表機出廠配備的韌體完全可以正常使用，但新版本往往具有更多的新功能和改進。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "自動升級韌體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "上傳自訂韌體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "因為沒有與印表機連線，無法更新韌體。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "因為連線的印表機不支援更新韌體，無法更新韌體。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "選擇自訂韌體"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "韌體更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "更新韌體中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "韌體更新已完成。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "由於未知錯誤，韌體更新失敗。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "由於通訊錯誤，導致韌體更新失敗。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "由於輸入/輸出錯誤，導致韌體更新失敗。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "由於韌體遺失，導致韌體更新失敗。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "轉換圖片..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "每個像素與底板的最大距離。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "高度 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "距離列印平台的底板高度，以毫米為單位。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "底板 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "列印平台寬度，以毫米為單位。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "寬度 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "列印平台深度，以毫米為單位"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "深度 (mm)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "若要列印浮雕，深色像素應該對應到較厚的位置，以阻擋更多的光通過。若要列印高度圖，淺色像素表示較高的地形，因此淺色像素應對應於產生的 3D 模型中較厚的位置。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "顏色越深高度越高"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "顏色越淺高度越高"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "若要列印浮雕，使用一個簡易的對數模型計算半透明效果。若要列印高度圖，將像素值線性對應到高度。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "線性"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "半透明"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "光線穿透 1mm 厚度列印件的百分比。降低此值可增加暗部的對比度，並降低亮部的對比度。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "1mm 透明度"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "影像平滑程度。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "平滑"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "確定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "噴頭設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "噴頭孔徑"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "相容的耗材直徑"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "噴頭偏移 X"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
-msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "噴頭偏移 Y"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
-msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "冷卻風扇數量"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "擠出機起始 G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "擠出機結束 G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "印表機設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (寬度)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (深度)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (高度)"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "列印平台形狀"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "原點位於中心"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "熱床"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "熱箱"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "市集"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-code 類型"
+msgid "You need to accept the license to install the package"
+msgstr "你必需同意授權協議才能安裝套件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "列印頭設定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "你帳戶的更動"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X 最小值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "捨棄"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y 最小值"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "下一步"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "X max"
-msgstr "X 最大值"
+msgid "The following packages will be added:"
+msgstr "將新增下列套件："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y 最大值"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "下列套件因 Cura 版本不相容，無法安裝："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
-msgctxt "@label"
-msgid "Gantry Height"
-msgstr "吊車高度"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "移除確認"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "擠出機數目"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "你正在移除仍被使用的耗材/列印設定。確認後會將下列耗材/列印設定重設為預設值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "起始 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "結束 G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"請確認你的印表機有連接：\n"
-"- 檢查印表機是否已打開。\n"
-"- 檢查印表機是否已連接到網路。\n"
-"- 檢查是否已登入以尋找雲端連接的印表機。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "確定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "請將你的印表機連上網路。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "查看線上使用者手冊"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "網格類型"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
-msgctxt "@label"
-msgid "Normal model"
-msgstr "普通模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
-msgctxt "@label"
-msgid "Print as support"
-msgstr "做為支撐"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr "修改重疊處設定"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "無法連上 Cura 套件資料庫。請檢查你的網路連線。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr "重疊處不建立支撐"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr "只填充網格"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
-msgstr "切割網格"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "選擇設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "選擇對此模型的自訂設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "篩選..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "顯示全部"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "後處理外掛"
+msgid "Community Contributions"
+msgstr "社群貢獻"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
 msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "後處理腳本"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
-msgctxt "@action"
-msgid "Add a script"
-msgstr "添加一個腳本"
+msgid "Community Plugins"
+msgstr "社群外掛"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
 msgctxt "@label"
-msgid "Settings"
-msgstr "設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
-msgstr "更改目前啟用的後處理腳本。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] "下列為啟用中的腳本："
+msgid "Generic Materials"
+msgstr "通用耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "顏色方案"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "耗材顏色"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "線條類型"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "速度"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "層厚"
+msgid "Version"
+msgstr "版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
 msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "相容模式"
+msgid "Last updated"
+msgstr "最後更新時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
-msgid "Travels"
-msgstr "移動軌跡"
+msgid "Brand"
+msgstr "品牌"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
 msgctxt "@label"
-msgid "Helpers"
-msgstr "輔助結構"
+msgid "Downloads"
+msgstr "下載"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "外殼"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
+msgctxt "@title:tab"
+msgid "Installed plugins"
+msgstr "已安裝外掛"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "填充"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "尚未安裝任何外掛。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "只顯示頂層"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "已安裝耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "顯示頂端 5 層列印細節"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "尚未安裝任何耗材。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "頂 / 底層"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "捆綁式外掛"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "內壁"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "捆綁式耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "min"
-msgstr "最小值"
+msgid "Website"
+msgstr "網站"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "max"
-msgstr "最大值"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "更多關於匿名資料收集的資訊"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗。以下是共享資料的範例："
+msgid "Email"
+msgstr "電子郵件"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "我不想傳送匿名資料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "請登入以取得 Ultimaker Cura Enterprise 驗証的外掛及耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "允許傳送匿名資料"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "登入"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "返回"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "取得套件..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
 msgid "Compatibility"
 msgstr "相容性"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
 msgctxt "@label:table_header"
 msgid "Machine"
 msgstr "機器"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
 msgctxt "@label:table_header"
 msgid "Build Plate"
 msgstr "列印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
 msgctxt "@label:table_header"
 msgid "Support"
 msgstr "支撐"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
 msgctxt "@label:table_header"
 msgid "Quality"
 msgstr "品質"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
 msgctxt "@action:label"
 msgid "Technical Data Sheet"
 msgstr "技術資料表"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
 msgctxt "@action:label"
 msgid "Safety Data Sheet"
 msgstr "安全資料表"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
 msgctxt "@action:label"
 msgid "Printing Guidelines"
 msgstr "列印指南"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
 msgctxt "@action:label"
 msgid "Website"
 msgstr "網站"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "外掛"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "耗材"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
 msgid "Installed"
 msgstr "已安裝"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "需要<a href='%1'>登入</a>才能進行安裝或升級"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "前往網路市集"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>購買耗材線軸</a>"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
+msgctxt "@label"
+msgid "Will install upon restarting"
+msgstr "將在重新啟動時安裝"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
 msgctxt "@action:button"
 msgid "Update"
 msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "更新中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "更新完成"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "需要<a href='%1'>登入</a>才能進行升級"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "降級版本"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "移除"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "已安裝"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "需要<a href='%1'>登入</a>才能進行安裝或升級"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>購買耗材線軸</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
 msgctxt "@label"
 msgid "Premium"
 msgstr "付費會員"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "前往網路市集"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
 msgctxt "@label"
 msgid "Search materials"
 msgstr "搜尋耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
 msgid "You will need to restart Cura before changes in packages have effect."
 msgstr "需重新啟動 Cura，套件的更動才能生效。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr "結束 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "外掛"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "耗材"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "已安裝"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "將在重新啟動時安裝"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "需要<a href='%1'>登入</a>才能進行升級"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "降級版本"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
 msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "移除"
+msgid "Back"
+msgstr "返回"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
 msgctxt "@action:button"
 msgid "Install"
 msgstr "安裝"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "你帳戶的更動"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+msgctxt "@label"
+msgid "Mesh Type"
+msgstr "網格類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "捨棄"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+msgctxt "@label"
+msgid "Normal model"
+msgstr "普通模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "下一步"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+msgctxt "@label"
+msgid "Print as support"
+msgstr "做為支撐"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "將新增下列套件："
+msgid "Modify settings for overlaps"
+msgstr "修改重疊處設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "下列套件因 Cura 版本不相容，無法安裝："
+msgid "Don't support overlaps"
+msgstr "重疊處不建立支撐"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "移除確認"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr "只填充網格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "你正在移除仍被使用的耗材/列印設定。確認後會將下列耗材/列印設定重設為預設值。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr "切割網格"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "耗材"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "選擇設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "參數"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "選擇對此模型的自訂設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "確定"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "篩選..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
-msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "你必需同意授權協議才能安裝套件"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "顯示全部"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
-msgctxt "@label"
-msgid "Website"
-msgstr "網站"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "後處理外掛"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Email"
-msgstr "電子郵件"
+msgid "Post Processing Scripts"
+msgstr "後處理腳本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
-msgctxt "@label"
-msgid "Version"
-msgstr "版本"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+msgctxt "@action"
+msgid "Add a script"
+msgstr "添加一個腳本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
-msgid "Last updated"
-msgstr "最後更新時間"
+msgid "Settings"
+msgstr "設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
-msgctxt "@label"
-msgid "Brand"
-msgstr "品牌"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr "更改目前啟用的後處理腳本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
-msgctxt "@label"
-msgid "Downloads"
-msgstr "下載"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] "下列為啟用中的腳本："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "社群貢獻"
+msgid "Queued"
+msgstr "已排入隊列"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
-msgctxt "@label"
-msgid "Community Plugins"
-msgstr "社群外掛"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "使用瀏覽器管理"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "通用耗材"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "無法連上 Cura 套件資料庫。請檢查你的網路連線。"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "目前沒有列印作業在隊列中。可透過切片並傳送列印作來增加一個。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "已安裝外掛"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+msgctxt "@label"
+msgid "Print jobs"
+msgstr "列印作業"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "尚未安裝任何外掛。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+msgctxt "@label"
+msgid "Total print time"
+msgstr "總列印時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "已安裝耗材"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+msgctxt "@label"
+msgid "Waiting for"
+msgstr "等待"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "尚未安裝任何耗材。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "修改設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "捆綁式外掛"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+msgctxt "@action:button"
+msgid "Override"
+msgstr "覆寫"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "捆綁式耗材"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
+msgctxt "@label"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "分配的印表機 %1 需要下列的設定更動："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
-msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "取得套件..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
+msgctxt "@label"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "已分配到印表機 %1，但列印工作含有未知的耗材設定。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "請登入以取得 Ultimaker Cura Enterprise 驗証的外掛及耗材"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
+msgctxt "@label"
+msgid "Change material %1 from %2 to %3."
+msgstr "將耗材 %1 從 %2 改成 %3。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "市集"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
+msgctxt "@label"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "將 %3 做為耗材 %1 載入（無法覆寫）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "列印平台調平"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
+msgctxt "@label"
+msgid "Change print core %1 from %2 to %3."
+msgstr "將 print core %1 從 %2 改成 %3。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "為了確保列印品質出色，你現在可以開始調整你的列印平台。當你點擊「移動到下一個位置」時，噴頭將移動到不同的可調節位置。"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "將列印平台改成 %1（無法覆寫）。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "在噴頭停止的每一個位置下方插入一張紙，並調整平台高度。當紙張恰好被噴頭的尖端輕微壓住時，表示列印平台已被校準在正確的高度。"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "覆寫會將指定的設定套用在現有的印表機上。這可能導致列印失敗。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "開始進行列印平台調平"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+msgctxt "@label"
+msgid "Glass"
+msgstr "玻璃"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "移動到下一個位置"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "鋁"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "請選擇適用於 Ultimaker Original 的更新檔案"
+msgid "Unavailable printer"
+msgstr "無法使用的印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "熱床（官方版本或自製版本）"
+msgid "First available"
+msgstr "可用的第一個"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "請更新你印表機的韌體以便遠端管理工作隊列。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "連接到網路印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "要透過網路列印，請確認你的印表機已透過網路線或 WIFI 連接到網路。若你無法讓 Cura 與印表機連線，你仍然可以使用 USB 裝置將 G-code 檔案傳輸到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "從下列清單中選擇你的印表機："
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "編輯"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "移除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "刷新"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "如果你的印表機未被列出，請閱讀<a href='%1'>網路列印故障排除指南</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "韌體版本"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "位址"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "此印表機未被設定為管理印表機群組。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "此印表機為 %1 印表機群組的管理者。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "該網路位址的印表機尚無回應。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "無效的 IP 位址"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "請輸入有效的 IP 位址 。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "印表機網路位址"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "輸入印表機的 IP 位址。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "修改設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "覆寫"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "分配的印表機 %1 需要下列的設定更動："
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "已分配到印表機 %1，但列印工作含有未知的耗材設定。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "將耗材 %1 從 %2 改成 %3。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "將 %3 做為耗材 %1 載入（無法覆寫）。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "將 print core %1 從 %2 改成 %3。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "將列印平台改成 %1（無法覆寫）。"
+msgid "OK"
+msgstr "確定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "覆寫會將指定的設定套用在現有的印表機上。這可能導致列印失敗。"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "網路連線列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "玻璃"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "鋁"
+msgid "Printer selection"
+msgstr "印表機選擇"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "移至頂端"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "刪除"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "繼續"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "正在暫停..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "正在繼續..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "暫停"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "正在中斷..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "中斷"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "你確定要將 %1 移至隊列的頂端嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "將列印作業移至最頂端"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "你確定要刪除 %1 嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "刪除列印作業"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "你確定要中斷 %1 嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "中斷列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "已中斷"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "已完成"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "正在準備..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "正在中斷..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "正在暫停..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "已暫停"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "正在繼續..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "需要採取的動作"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "在 %2 完成 %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "管理印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "請更新你印表機的韌體以便遠端管理工作隊列。"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "正在載入..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "無法使用"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "無法連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "閒置中"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "正在列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "無標題"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "匿名"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "需要修改設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "細項"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "無法使用的印表機"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "請選擇適用於 Ultimaker Original 的更新檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "可用的第一個"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "熱床（官方版本或自製版本）"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "已中斷"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "列印平台調平"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "已完成"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "為了確保列印品質出色，你現在可以開始調整你的列印平台。當你點擊「移動到下一個位置」時，噴頭將移動到不同的可調節位置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "正在準備..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "在噴頭停止的每一個位置下方插入一張紙，並調整平台高度。當紙張恰好被噴頭的尖端輕微壓住時，表示列印平台已被校準在正確的高度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "正在中斷..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "開始進行列印平台調平"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "正在暫停..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "移動到下一個位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "已暫停"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "開啟專案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "正在繼續..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "更新已有設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "需要採取的動作"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "新建設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "在 %2 完成 %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "摘要 - Cura 專案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "印表機設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "如何解決機器的設定衝突？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "類型"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "印表機群組"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "列印參數設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "如何解决列印參數中的設定衝突？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "名稱"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "意圖"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "不在列印參數中"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 覆寫"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "衍生自"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 覆寫"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "耗材設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "如何解决耗材的設定衝突？"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "參數顯示設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "模式"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "顯示設定："
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 / %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "載入專案時將清除列印平台上的所有模型。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "開啟"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "此列印可能會有些問題。點擊查看調整提示。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"請確認你的印表機有連接：\n"
+"- 檢查印表機是否已打開。\n"
+"- 檢查印表機是否已連接到網路。\n"
+"- 檢查是否已登入以尋找雲端連接的印表機。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "請將你的印表機連上網路。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "查看線上使用者手冊"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "更多關於匿名資料收集的資訊"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗。以下是共享資料的範例："
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "我不想傳送匿名資料"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "允許傳送匿名資料"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "已排入隊列"
+msgid "Color scheme"
+msgstr "顏色方案"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "使用瀏覽器管理"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "耗材顏色"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "線條類型"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "速度"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "目前沒有列印作業在隊列中。可透過切片並傳送列印作來增加一個。"
+msgid "Compatibility Mode"
+msgstr "相容模式"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "列印作業"
+msgid "Travels"
+msgstr "移動軌跡"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "總列印時間"
+msgid "Helpers"
+msgstr "輔助結構"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "等待"
+msgid "Shell"
+msgstr "外殼"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "網路連線列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "列印"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "印表機選擇"
+msgid "Only Show Top Layers"
+msgstr "只顯示頂層"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "登入"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "顯示頂端 5 層列印細節"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "連線 3D 列印的金鑰"
+msgid "Top / Bottom"
+msgstr "頂 / 底層"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- 使用更多的列印參數設定和外掛訂做你的使用體驗\n"
-"- 通過同步設定可在任何地方將其載入以保持靈活性\n"
-"- 透過 Ultimaker 印表機上的遠端工作流程提高效率"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "內壁"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "建立帳號"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "最小值"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "檢查中..."
+msgid "max"
+msgstr "最大值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "噴頭設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "帳號已同步"
+msgid "Nozzle size"
+msgstr "噴頭孔徑"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "出了些問題..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "安裝待處理的更新"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "相容的耗材直徑"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "檢查帳號更新"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "噴頭偏移 X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "最後一次更新：%1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "噴頭偏移 Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帳號"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "冷卻風扇數量"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "登出"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "擠出機起始 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "擠出機結束 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "印表機設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "沒有時間估計"
+msgid "X (Width)"
+msgstr "X (寬度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "沒有成本估算"
+msgid "Y (Depth)"
+msgstr "Y (深度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "預覽"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (高度)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "時間估計"
+msgid "Build plate shape"
+msgstr "列印平台形狀"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "耗材估計"
+msgid "Origin at center"
+msgstr "原點位於中心"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "熱床"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "熱箱"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "正在切片..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-code 類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "無法切片"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "列印頭設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X 最小值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y 最小值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X 最大值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y 最大值"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "吊車高度"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "擠出機數目"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "起始 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "結束 G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "轉換圖片..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "每個像素與底板的最大距離。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "高度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "距離列印平台的底板高度，以毫米為單位。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "底板 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "列印平台寬度，以毫米為單位。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "寬度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "列印平台深度，以毫米為單位"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "深度 (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "若要列印浮雕，深色像素應該對應到較厚的位置，以阻擋更多的光通過。若要列印高度圖，淺色像素表示較高的地形，因此淺色像素應對應於產生的 3D 模型中較厚的位置。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "顏色越深高度越高"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "顏色越淺高度越高"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "若要列印浮雕，使用一個簡易的對數模型計算半透明效果。若要列印高度圖，將像素值線性對應到高度。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "線性"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "半透明"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "光線穿透 1mm 厚度列印件的百分比。降低此值可增加暗部的對比度，並降低亮部的對比度。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "1mm 透明度"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "影像平滑程度。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "平滑"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "我的備份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "你目前沒有任何備份。 使用「立即備份」按鈕建立一個。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "在預覽階段限制只能顯示 5 個備份。 刪除備份以顯示較舊的備份。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "備份並同步你的 Cura 設定。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "處理中"
+msgid "Want more?"
+msgstr "想要更多？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "切片"
+msgid "Backup Now"
+msgstr "立即備份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "開始切片程序"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "自動備份"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "每天啟動 Cura 時自動建立備份。"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura 版本"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "耗材"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "外掛"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "取消"
+msgid "Restore"
+msgstr "復原"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "顯示線上故障排除指南"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "刪除備份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "切換全螢幕"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "你確定要刪除此備份嗎？ 這動作無法復原。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "離開全螢幕"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "復原備份"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "復原（&U）"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "在復原備份之前，你需要重新啟動 Cura。 你想要現在關閉 Cura 嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "取消復原（&R）"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura 備份"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "耗材"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "常用"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "通用"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "檔案（&F）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "儲存專案...（&S）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "匯出...（&E）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "退出（&Q）"
+msgid "Export Selection..."
+msgstr "匯出選擇..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "立體圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "最近開啟的檔案（&R）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "選擇設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "自訂選項"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "已啟用"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "耗材"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "在此耗材組合下，使用膠水以獲得較佳的附著。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "由於無法識別 %1，因此無法使用此設定。 請連上 %2 下載正確的耗材參數設定。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "市集"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "從印表機載入可用的設定..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "由於印表機已斷線，因此設定無法使用。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "檢視（&V）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "前視圖"
+msgid "&Camera position"
+msgstr "視角位置（&C）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "上視圖"
+msgid "Camera view"
+msgstr "攝影機檢視"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "左視圖"
+msgid "Perspective"
+msgstr "透視"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "右視圖"
+msgid "Orthographic"
+msgstr "正交"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "設定 Cura..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "列印平台（&B）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "新增印表機（&A）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "支援網路的印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "管理印表機（&I）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "本機印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "管理耗材..."
+msgid "Visible Settings"
+msgstr "顯示設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "從市集增加更多耗材"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "使用目前設定 / 覆寫更新列印參數（&U）"
+msgid "Collapse All Categories"
+msgstr "折疊所有分類"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "捨棄目前更改（&D）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "管理參數顯示..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "從目前設定 / 覆寫值建立列印參數（&C）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "設定（&S）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "管理列印參數.."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "印表機（&P）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "顯示線上說明文件（&D）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "耗材（&M）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "BUG 回報（&B）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "設為主要擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "新功能"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "啟用擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "關於..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "關閉擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "刪除所選模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "置中所選模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "列印所選模型："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "複製所選模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "刪除模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "複製個數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "將模型置中（&N）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "群組模型（&G）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "自訂列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "取消模型群組"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "捨棄目前更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "結合模型（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "複製模型...（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"部份設定/覆寫值與儲存在列印參數中的值不同。\n"
+"\n"
+"點擊開啟列印參數管理器。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "選擇所有模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "開啟"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "清空列印平台"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "關閉"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "重新載入所有模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "實驗功能"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "將所有模型排列到所有列印平台上"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "推薦"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "排列所有模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "自訂選項"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "排列所選模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "列印設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "重置所有模型位置"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "列印設定已被停用。 G-code 檔案無法修改。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "重置所有模型旋轉"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "漸近式填充"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "開啟檔案（&O）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "漸近式填充將隨著列印高度的提升而逐漸加大填充密度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "新建專案（&N）..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "顯示設定資料夾"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "你修改過部份列印參數設定。如果你想改變這些設定，請切換到自訂模式。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "參數顯示設定..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "支撐"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "市集（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "在模型的突出部分產生支撐結構。若不這樣做，這些部分在列印時將倒塌。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "此套件將在重新啟動後安裝。"
+msgid "Adhesion"
+msgstr "附著"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "基本"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "允許列印邊緣或木筏。這將在你的物件周圍或下方添加一個容易切斷的平面區域。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "沒有擠出機 %2 用的 %1 參數。將使用預設參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "列印參數"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "正在列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "關閉 %1 中"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "作業名稱"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "是否確定要離開 %1 ？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "列印時間"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "預計剩餘時間"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "開啟檔案"
+msgid "Discard or Keep changes"
+msgstr "捨棄或保留更改"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "安裝套件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"你修改了一些參數設定。\n"
+"你要在切換參數後保留這些更動嗎？\n"
+"或者你也可以忽略這些更動，從 '%1' 載入預設值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "開啟檔案"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "列印參數設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "我們已經在你選擇的檔案中找到一個或多個 G-Code 檔案。你一次只能開啟一個 G-Code 檔案。若需開啟 G-Code 檔案，請僅選擇一個。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "目前更動"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "新增印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "總是詢問"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "新功能"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "捨棄更改，並不再詢問此問題"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "保留更改，並不再詢問此問題"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "忽略更動"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "保留更動"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "關於 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "版本：%1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "熔絲 3D 列印技術的的端對端解決方案。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3468,1977 +3596,2101 @@ msgstr ""
 "Cura 由 Ultimaker B.V. 與社區合作開發。\n"
 "Cura 使用以下開源專案："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "圖形用戶介面"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "應用框架"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code 產生器"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "進程間通訊交互使用庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "編程語言"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI 框架"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "GUI 框架綁定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "C / C++ 綁定庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "資料交換格式"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "科學計算函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "高速運算函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "用於處理 STL 檔案的函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "用於處理平面物件的函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "用於處理三角形網格的函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "用於處理 3MF 檔案的函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "用於檔案 metadata 和串流的函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "串口通訊函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf 發現函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "多邊形剪輯函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python 靜態型別檢查器"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "驗證 SSL 可信度用的根憑證"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python 錯誤追蹤函式庫"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "多邊形包裝函式庫，由 Prusa Research 開發"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Python bindings for libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "字體"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG 圖標"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Linux cross-distribution 應用程式部署"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "開啟專案檔案"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "這是一個 Cura 專案檔案。你想將其作為一個專案開啟還是從中匯入模型？"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "記住我的選擇"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "作為專案開啟"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "匯入模型"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "捨棄或保留更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"你修改了一些參數設定。\n"
-"你要在切換參數後保留這些更動嗎？\n"
-"或者你也可以忽略這些更動，從 '%1' 載入預設值。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "列印參數設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "目前更動"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "總是詢問"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "捨棄更改，並不再詢問此問題"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "保留更改，並不再詢問此問題"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "忽略更動"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "保留更動"
+msgid "Open file(s)"
+msgstr "開啟檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "我們已經在你所選擇的檔案中找到一個或多個專案檔案，但一次只能開啟一個專案檔案。我們建議只從那些檔案中匯入模型而不開啟專案。你要繼續操作嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "匯入所有模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "儲存專案"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "擠出機 %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 & 耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "儲存時不再顯示專案摘要"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "儲存"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "用 %1 列印所選模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "開啟專案檔案"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "這是一個 Cura 專案檔案。你想將其作為一個專案開啟還是從中匯入模型？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "記住我的選擇"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "作為專案開啟"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "匯入模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "無標題"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "檔案（&F）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "歡迎來到 Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "編輯（&E）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "檢視（&V）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "開始"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "設定（&S）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "空的"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "擴充功能（&X）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "協助我們改進 Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "偏好設定（&R）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗，包含："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "幫助（&H）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "機器類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "新建專案"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "耗材用法"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "你確定要開始一個新專案嗎？這將清除列印平台及任何未儲存的設定。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "切片次數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "市集"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "列印設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Ultimaker Cura 收集的資料不包含任何個人資訊。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "更多資訊"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "由於無法識別 %1，因此無法使用此設定。 請連上 %2 下載正確的耗材參數設定。"
+msgid "Add printer by IP address"
+msgstr "使用 IP 位址新增印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "輸入印表機的 IP 位址。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "新增"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "市集"
+msgid "Could not connect to device."
+msgstr "無法連接到裝置。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "從印表機載入可用的設定..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "無法連接到 Ultimaker 印表機？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "由於印表機已斷線，因此設定無法使用。"
+msgid "The printer at this address has not responded yet."
+msgstr "此位址的印表機尚未回應。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "選擇設定"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "無法添加此印表機，因為它是未知的印表機，或者它不是印表機群組的主機。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "返回"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "連接"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "設定"
+msgid "Add a printer"
+msgstr "新增印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "自訂選項"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "新增網路印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "印表機"
+msgid "Add a non-networked printer"
+msgstr "新增非網路印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "已啟用"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "耗材"
+msgid "Add a Cloud printer"
+msgstr "新增雲端印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "在此耗材組合下，使用膠水以獲得較佳的附著。"
+msgid "Waiting for Cloud response"
+msgstr "等待雲端服務回應"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "列印所選模型："
+msgid "No printers found in your account?"
+msgstr "在你的帳號未發現任何印表機？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "複製所選模型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "下列你帳號中的印表機已新增至 Cura："
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "手動新增印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "複製個數"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "儲存專案...（&S）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "匯出...（&E）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "匯出選擇..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "耗材"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "常用"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "略過"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "通用"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "使用者授權"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "支援網路的印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "拒絕並關閉"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "本機印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "最近開啟的檔案（&R）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "在你的網路上找不到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "印表機（&P）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "耗材（&M）"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "使用 IP 位址新增印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "設為主要擠出機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "新增雲端印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "啟用擠出機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "故障排除"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "關閉擠出機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "製造商"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "列印參數作者"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "印表機名稱"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "請為你的印表機取一個名稱"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "最後一次更新：%1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker 帳號"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "登出"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "登入"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "檢查中..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "帳號已同步"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "出了些問題..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "安裝待處理的更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "檢查帳號更新"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "物件清單"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "顯示設定"
+msgid "Show Online Troubleshooting Guide"
+msgstr "顯示線上故障排除指南"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "折疊所有分類"
+msgid "Toggle Full Screen"
+msgstr "切換全螢幕"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "管理參數顯示..."
+msgid "Exit Full Screen"
+msgstr "離開全螢幕"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "復原（&U）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "取消復原（&R）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "退出（&Q）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "視角位置（&C）"
+msgid "3D View"
+msgstr "立體圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "攝影機檢視"
+msgid "Front View"
+msgstr "前視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "透視"
+msgid "Top View"
+msgstr "上視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "正交"
+msgid "Left Side View"
+msgstr "左視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "列印平台（&B）"
+msgid "Right Side View"
+msgstr "右視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "未連接至印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "設定 Cura..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "印表機不接受命令"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "新增印表機（&A）..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "維護中。請檢查印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "管理印表機（&I）..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "與印表機的連線中斷"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "管理耗材..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "列印中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "從市集增加更多耗材"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "已暫停"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "使用目前設定 / 覆寫更新列印參數（&U）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "準備中..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "捨棄目前更改（&D）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "請取出列印件"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "從目前設定 / 覆寫值建立列印參數（&C）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "管理列印參數.."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "顯示線上說明文件（&D）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "BUG 回報（&B）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "新功能"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "關於..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "刪除模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "將模型置中（&N）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "群組模型（&G）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "取消模型群組"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "結合模型（&M）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "複製模型...（&M）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "選擇所有模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "清空列印平台"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "重新載入所有模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "將所有模型排列到所有列印平台上"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "排列所有模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "排列所選模型"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "重置所有模型位置"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "重置所有模型旋轉"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "開啟檔案（&O）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "新建專案（&N）..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "顯示設定資料夾"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "參數顯示設定..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "市集（&M）"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "已計算"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "目前"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "單位"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "資訊"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "直徑更改確認"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "新的耗材直徑設定為 %1 mm，這與目前的擠出機不相容。你要繼續嗎？"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "中斷列印"
+msgid "Display Name"
+msgstr "顯示名稱"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "你確定要中斷列印嗎？"
+msgid "Material Type"
+msgstr "耗材類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "做為支撐而列印。"
+msgid "Color"
+msgstr "顏色"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "與此模型重疊的其他模型已被更改。"
+msgid "Properties"
+msgstr "屬性"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "與此模型重疊的填充已被更改。"
+msgid "Density"
+msgstr "密度"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "與此模型的重疊沒有支撐。"
+msgid "Diameter"
+msgstr "直徑"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "覆寫 %1 設定。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "耗材成本"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "物件清單"
+msgid "Filament weight"
+msgstr "耗材重量"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "耗材長度"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "每公尺成本"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "此耗材與 %1 相關聯，並共享其部份屬性。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "解除聯結耗材"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "描述"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "附著資訊"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "啟用"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "建立"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "複製"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "匯入"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "匯出"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "移除確認"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "你確定要移除 %1 嗎？這動作無法復原！"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "匯入耗材設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "無法匯入耗材 <filename>%1</filename>：<message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "成功匯入耗材 <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "匯出耗材設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "無法匯出耗材至 <filename>%1</filename>：<message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "成功匯出耗材至：<filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "印表機"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "重命名"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "建立"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "複製"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "建立列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "請為此參數提供一個名字。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "複製列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "重命名列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "匯入列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "匯出列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "印表機：%1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "使用目前設定 / 覆寫值更新列印參數"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "此列印參數使用印表機指定的預設值，因此在下面的清單中沒有此設定項。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "你目前的設定與選定的列印參數相匹配。"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "全局設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "參數顯示設定"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "全選"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "基本"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "介面"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "貨幣："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "主題："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "需重新啟動 Cura，新的設定才能生效。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "當設定變更時自動進行切片。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "自動切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "顯示區設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "模型缺少支撐的區域已以紅色標示。如果沒有支撐這些區域將無法正常列印。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "顯示突出部分"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "模型缺少或多餘的表面已用警告符號標示。工具路徑是將缺少部份補上的型狀。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "顯示模型錯誤"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "當模型被選中時，視角將自動調整到最合適的觀察位置（模型處於正中央）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "當專案被選中時，自動置中視角"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "需要讓 Cura 的預設縮放操作反轉嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "反轉視角縮放方向。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "是否跟隨滑鼠方向進行縮放？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "正交透視不支援游標縮放功能。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "跟隨滑鼠方向縮放"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "需要移動平台上的模型，使它們不再交錯嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "確保每個模型都保持分離"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "要將模型下降到碰觸列印平台嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "自動下降模型到列印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "在 g-code 讀取器中顯示警告訊息。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "G-code 讀取器中的警告訊息"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "分層檢視要強制進入相容模式嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "強制分層檢視相容模式（需要重新啟動）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Cura 應該開啟在前次關閉時的位置嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "開啟時復原視窗位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "使用哪種類型的攝影機渲染？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "攝影機渲染："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "透視"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "正交"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "開啟並儲存檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "從桌面或外部程式開啟檔案時，使用同一 Cura 視窗嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "使用同一 Cura 視窗"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "當模型的尺寸過大時，是否將模型自動縮小至列印範圍嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "縮小過大模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "部份模型採用較大的單位(例如：公尺)，導致模型變得非常小，要將這些模型放大嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "放大過小模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "模型載入後要設為被選擇的狀態嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "模型載入後選擇模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "是否自動將印表機名稱作為列印作業名稱的前綴？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "將印表機名稱前綴添加到列印作業名稱中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "儲存專案檔案時是否顯示摘要？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "儲存專案時顯示摘要對話框"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "開啟專案檔案時的預設行為"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "開啟專案檔案時的預設行為： "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "每次都向我確認"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "總是作為一個專案開啟"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "總是匯入模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "當你對列印參數進行更改然後切換到其他列印參數時，將顯示一個對話框詢問你是否要保留修改。你也可以選擇預設不顯示該對話框。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "當切換到另一組列印參數時，對於被修改過的設定的預設行為： "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "總是放棄修改過的設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "總是將修改過的設定轉移至新的列印參數"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "隱私權"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "當 Cura 啟動時，是否自動檢查更新？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "啟動時檢查更新"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "你願意將關於你的列印資料以匿名形式發送到 Ultimaker 嗎？注意：我們不會記錄或發送任何模型、IP 位址或其他私人資料。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "（匿名）發送列印資訊"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "更多資訊"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "啟用"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "重命名"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "建立"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "複製"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "匯入"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "匯出"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "移除確認"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "你確定要移除 %1 嗎？這動作無法復原！"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "匯入耗材設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "無法匯入耗材 <filename>%1</filename>：<message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "檢示類型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "成功匯入耗材 <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "未連接至印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "匯出耗材設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "印表機不接受命令"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "無法匯出耗材至 <filename>%1</filename>：<message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "維護中。請檢查印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "成功匯出耗材至：<filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "與印表機的連線中斷"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "資訊"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "列印中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "直徑更改確認"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "已暫停"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "新的耗材直徑設定為 %1 mm，這與目前的擠出機不相容。你要繼續嗎？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "準備中..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "顯示名稱"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "請取出列印件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "耗材類型"
+msgid "Abort Print"
+msgstr "中斷列印"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "顏色"
+msgid "Are you sure you want to abort the print?"
+msgstr "你確定要中斷列印嗎？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "屬性"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "搜尋設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "密度"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "將設定值複製到所有擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "直徑"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "複製所有改變的設定值到所有擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "耗材成本"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "隱藏此設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "耗材重量"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "不再顯示此設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "耗材長度"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "保持此設定顯示"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "每公尺成本"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"部份隱藏設定使用的值與一般計算所得的值不同。\n"
+"\n"
+"點擊以顯這些設定。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "此耗材與 %1 相關聯，並共享其部份屬性。"
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "此設定未被使用，因為受它影響的設定都被覆寫了。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "解除聯結耗材"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "影響"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "描述"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "影響因素"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "附著資訊"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "這個設定是所有擠出機共用的。修改它會同時更動到所有擠出機的值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "列印設定"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "此設定是透過解決擠出機設定值衝突獲得："
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "建立"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"此設定的值與列印參數不同。\n"
+"\n"
+"單擊以復原列印參數的值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "複製"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "建立列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "請為此參數提供一個名字。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "複製列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "重命名列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "匯入列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "匯出列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "印表機：%1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "使用目前設定 / 覆寫值更新列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "捨棄目前更改"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "此列印參數使用印表機指定的預設值，因此在下面的清單中沒有此設定項。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "你目前的設定與選定的列印參數相匹配。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "全局設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "已計算"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "設定"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"這個設定通常由計算得出，可是它目前被設定為一個數值。\n"
+"\n"
+"點擊以恢復計算得出的數值。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "列印參數"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "立體圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "目前"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "前視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "單位"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "上視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "參數顯示設定"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "左視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "全選"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "右視圖"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "擠出機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "加熱頭的目標溫度。加熱頭將加熱或冷卻至此溫度。若設定為 0，則關閉加熱頭的加熱。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "此加熱頭的目前溫度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "加熱頭預熱溫度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "預熱"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "列印前預先加熱。你可以在加熱時繼續調整你的列印，當你準備好列印時就不需等待加熱頭升溫。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "該擠出機中耗材的顏色。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "該擠出機中的耗材。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "該擠出機所使用的噴頭。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "列印平台"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "熱床的目標溫度。熱床將加熱或冷卻至此溫度。若設定為 0，則不使用熱床。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "熱床目前溫度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "熱床的預熱溫度。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "列印前請預熱熱床。你可以在熱床加熱時繼續調整相關物件，讓你在準備列印時不必等待熱床加熱完畢。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "印表機控制"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "輕搖位置"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "輕搖距離"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "傳送 G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "傳送一個自訂的 G-code 命令到連接中的印表機。按下 Enter 鍵傳送命令。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "尚未連線到印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "雲端印表機為離線狀態。請檢查印表機是否已開機並連上網路。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "此印表機未連接到你的帳號。請前往 Ultimaker Digital Factory 建立連接。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "雲端服務目前無法使用。請登入以連接到雲端印表機。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "雲端服務目前無法使用。請檢查你的網路連線。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "新增印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "管理印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "已連線印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "預設印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "正在列印"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "作業名稱"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "列印時間"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "預計剩餘時間"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"部份設定/覆寫值與儲存在列印參數中的值不同。\n"
-"\n"
-"點擊開啟列印參數管理器。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "自訂列印參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "沒有擠出機 %2 用的 %1 參數。將使用預設參數"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "列印設定已被停用。 G-code 檔案無法修改。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "推薦"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "自訂選項"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "開啟"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "關閉"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "實驗功能"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "附著"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "允許列印邊緣或木筏。這將在你的物件周圍或下方添加一個容易切斷的平面區域。"
+msgid "Is printed as support."
+msgstr "做為支撐而列印。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "漸近式填充"
+msgid "Other models overlapping with this model are modified."
+msgstr "與此模型重疊的其他模型已被更改。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "漸近式填充將隨著列印高度的提升而逐漸加大填充密度。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "你修改過部份列印參數設定。如果你想改變這些設定，請切換到自訂模式。"
+msgid "Infill overlapping with this model is modified."
+msgstr "與此模型重疊的填充已被更改。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "支撐"
+msgid "Overlaps with this model are not supported."
+msgstr "與此模型的重疊沒有支撐。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "在模型的突出部分產生支撐結構。若不這樣做，這些部分在列印時將倒塌。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "覆寫 %1 設定。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"部份隱藏設定使用的值與一般計算所得的值不同。\n"
-"\n"
-"點擊以顯這些設定。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "市集"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "此設定未被使用，因為受它影響的設定都被覆寫了。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "編輯（&E）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "影響"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "擴充功能（&X）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "影響因素"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "偏好設定（&R）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "這個設定是所有擠出機共用的。修改它會同時更動到所有擠出機的值。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "幫助（&H）"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "此設定是透過解決擠出機設定值衝突獲得："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "新建專案"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"此設定的值與列印參數不同。\n"
-"\n"
-"單擊以復原列印參數的值。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "你確定要開始一個新專案嗎？這將清除列印平台及任何未儲存的設定。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"這個設定通常由計算得出，可是它目前被設定為一個數值。\n"
-"\n"
-"點擊以恢復計算得出的數值。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "搜尋設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "將設定值複製到所有擠出機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "複製所有改變的設定值到所有擠出機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "隱藏此設定"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "不再顯示此設定"
+msgid "This package will be installed after restarting."
+msgstr "此套件將在重新啟動後安裝。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "保持此設定顯示"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "設定"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "立體圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "關閉 %1 中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "前視圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "是否確定要離開 %1 ？"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "上視圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "安裝套件"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "左視圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "開啟檔案"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "右視圖"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "我們已經在你選擇的檔案中找到一個或多個 G-Code 檔案。你一次只能開啟一個 G-Code 檔案。若需開啟 G-Code 檔案，請僅選擇一個。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "檢示類型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "新增印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "新增雲端印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "新功能"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "等待雲端服務回應"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "雲端印表機為離線狀態。請檢查印表機是否已開機並連上網路。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "在你的帳號未發現任何印表機？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "此印表機未連接到你的帳號。請前往 Ultimaker Digital Factory 建立連接。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "下列你帳號中的印表機已新增至 Cura："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "雲端服務目前無法使用。請登入以連接到雲端印表機。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
-msgctxt "@button"
-msgid "Add printer manually"
-msgstr "手動新增印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "雲端服務目前無法使用。請檢查你的網路連線。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Finish"
-msgstr "完成"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "製造商"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "列印參數作者"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "印表機名稱"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "請為你的印表機取一個名稱"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
+msgid "Add printer"
 msgstr "新增印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "新增網路印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "新增非網路印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "在你的網路上找不到印表機。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
+msgctxt "@button"
+msgid "Manage printers"
+msgstr "管理印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "更新"
+msgid "Connected printers"
+msgstr "已連線印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "使用 IP 位址新增印表機"
+msgid "Preset printers"
+msgstr "預設印表機"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "新增雲端印表機"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "用 %1 列印所選模型"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "故障排除"
+msgid "Time estimation"
+msgstr "時間估計"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "使用 IP 位址新增印表機"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "輸入印表機的 IP 位址。"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "新增"
+msgid "Material estimation"
+msgstr "耗材估計"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "無法連接到裝置。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "無法連接到 Ultimaker 印表機？"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "此位址的印表機尚未回應。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "正在切片..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "無法添加此印表機，因為它是未知的印表機，或者它不是印表機群組的主機。"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "無法切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "返回"
+msgid "Processing"
+msgstr "處理中"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "連接"
+msgid "Slice"
+msgstr "切片"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker 帳號"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "連線 3D 列印的金鑰"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- 使用更多的列印參數設定和外掛訂做你的使用體驗"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- 通過同步設定可在任何地方將其載入以保持靈活性"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- 透過 Ultimaker 印表機上的遠端工作流程提高效率"
+msgid "Start the slicing process"
+msgstr "開始切片程序"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "略過"
+msgid "Cancel"
+msgstr "取消"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "協助我們改進 Ultimaker Cura"
+msgid "No time estimation available"
+msgstr "沒有時間估計"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura 搜集匿名資料以提高列印品質和使用者體驗，包含："
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "沒有成本估算"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "機器類型"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "預覽"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "耗材用法"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "提供行動裝置熱插拔和寫入檔案的支援。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "切片次數"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "行動裝置輸出設備外掛"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "列印設定"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "將設定從 Cura 3.5 版本升級至 4.0 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Ultimaker Cura 收集的資料不包含任何個人資訊。"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "升級版本 3.5 到 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "更多資訊"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "將設定從 Cura 4.6.2 版本升級至 4.7 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "空的"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "升級版本 4.6.2 到 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "使用者授權"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "將設定從 Cura 2.2 版本升級至 2.4 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "拒絕並關閉"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "升級版本 2.2 到 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "歡迎來到 Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "將設定從 Cura 4.2 版本升級至 4.3 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"請按照以下步驟進行設定\n"
-"Ultimaker Cura。這只需要一點時間。"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "升級版本 4.2 到 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "開始"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "將設定從 Cura 4.6.0 版本升級至 4.6.2 版本。"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Ultimaker Cura 新功能"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "升級版本 4.6.0 到 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "檢查模型和列印設定以了解可能發生的問題並給出建議。"
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "將設定從 Cura 3.0 版本升級至 3.1 版本。"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "模器檢查器"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "升級版本 3.0 到 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "提供讀取 3MF 格式檔案的支援。"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "將設定從 Cura 4.0 版本升級至 4.1 版本。"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF 讀取器"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "升級版本 4.0 到 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "提供寫入 3MF 檔案的支援。"
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "將設定從 Cura 2.6 版本升級至 2.7 版本。"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF 寫入器"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "升級版本 2.6 到 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "提供對讀取 AMF 格式檔案的支援。"
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "將設定從 Cura 2.5 版本升級至 2.6 版本。"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF 讀取器"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "升級版本 2.5 到 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "備份和復原你的設定。"
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "將設定從 Cura 4.1 版本升級至 4.2 版本。"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura 備份"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "升級版本 4.1 到 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "提供連結到 Cura 切片引擎後台。"
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "將設定從 Cura 2.1 版本升級至 2.2 版本。"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "Cura 引擎後台"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "升級版本 2.1 到 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "提供匯入 Cura 列印參數的支援。"
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "將設定從 Cura 3.2 版本升級至 3.3 版本。"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura 列印參數讀取器"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "升級版本 3.2 到 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "提供匯出 Cura 列印參數的支援。"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "將設定從 Cura 4.5 版本升級至 4.6 版本。"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura 列印參數寫入器"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "升級版本 4.5 到 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "檢查是否有韌體更新。"
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "將設定從 Cura 4.4 版本升級至 4.5 版本。"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "韌體更新檢查"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "升級版本 4.4 到 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "提供升級韌體用的機器操作。"
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "將設定從 Cura 4.7 版本升級至 4.8 版本。"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "韌體更新器"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "升級版本 4.7 到 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "從一個壓縮檔案中讀取 G-code。"
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "將設定從 Cura 3.3 版本升級至 3.4 版本。"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "壓縮檔案 G-code 讀取器"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "升級版本 3.3 到 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "將 G-code 寫入壓縮檔案。"
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "將設定從 Cura 4.3 版本升級至 4.4 版本。"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "壓縮檔案 G-code 寫入器"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "升級版本 4.3 到 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "提供匯入 G-code 檔案中列印參數的支援。"
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "將設定從 Cura 3.4 版本升級至 3.5 版本。"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code 列印參數讀取器"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "升級版本 3.4 到 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "允許載入和顯示 G-code 檔案。"
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "將設定從 Cura 2.7 版本升級至 3.0 版本。"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code 讀取器"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "升級版本 2.7 到 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "將 G-code 寫入檔案。"
+msgid "Provides support for reading AMF files."
+msgstr "提供對讀取 AMF 格式檔案的支援。"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code 寫入器"
+msgid "AMF Reader"
+msgstr "AMF 讀取器"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "支援從 2D 圖片檔案產生可列印 3D 模型的能力。"
+msgid "Provides support for importing profiles from g-code files."
+msgstr "提供匯入 G-code 檔案中列印參數的支援。"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "圖片讀取器"
+msgid "G-code Profile Reader"
+msgstr "G-code 列印參數讀取器"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "提供匯入 Cura 舊版本列印參數的支援。"
+msgid "Provides a machine actions for updating firmware."
+msgstr "提供升級韌體用的機器操作。"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "舊版 Cura 列印參數讀取器"
+msgid "Firmware Updater"
+msgstr "韌體更新器"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "提供更改機器設定的方法（如列印範圍，噴頭大小等）。"
+msgid "Provides support for reading X3D files."
+msgstr "提供讀取 X3D 檔案的支援。"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "印表機設定操作"
+msgid "X3D Reader"
+msgstr "X3D 讀取器"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "在 cura 提供一個監控介面。"
+msgid "Find, manage and install new Cura packages."
+msgstr "查詢，管理和安裝新的 Cura 套件。"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "監控介面"
+msgid "Toolbox"
+msgstr "工具箱"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5460,75 +5712,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "後處理"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "在 cura 提供一個準備介面。"
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "提供連結到 Cura 切片引擎後台。"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "準備介面"
+msgid "CuraEngine Backend"
+msgstr "Cura 引擎後台"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "在 Cura 提供一個預覽介面。"
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "接受 G-Code 並且傳送到印表機。此外掛也可以更新韌體。"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "預覽介面"
+msgid "USB printing"
+msgstr "USB 連線列印"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "提供行動裝置熱插拔和寫入檔案的支援。"
+msgid "Provides support for exporting Cura profiles."
+msgstr "提供匯出 Cura 列印參數的支援。"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "行動裝置輸出設備外掛"
+msgid "Cura Profile Writer"
+msgstr "Cura 列印參數寫入器"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "記錄某些事件以便在錯誤報告中使用"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "管理與 Ultimaker 網絡印表機的網絡連線。"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "哨兵記錄器"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker 網絡連線"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "提供模擬檢視。"
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "提供 Ultimaker 機器的操作（例如平台調平精靈，選擇升級等）。"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "模擬檢視"
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker 印表機操作"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "提交匿名切片資訊。這項功能可以在偏好設定中關閉。"
+msgid "Provides support for reading 3MF files."
+msgstr "提供讀取 3MF 格式檔案的支援。"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "切片資訊"
+msgid "3MF Reader"
+msgstr "3MF 讀取器"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "提供一個基本的實體網格檢視。"
+msgid "Writes g-code to a compressed archive."
+msgstr "將 G-code 寫入壓縮檔案。"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "實體檢視"
+msgid "Compressed G-code Writer"
+msgstr "壓縮檔案 G-code 寫入器"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "從一個壓縮檔案中讀取 G-code。"
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "壓縮檔案 G-code 讀取器"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "檢查模型和列印設定以了解可能發生的問題並給出建議。"
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "模器檢查器"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "檢查是否有韌體更新。"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "韌體更新檢查"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "允許載入和顯示 G-code 檔案。"
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-code 讀取器"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5540,16 +5832,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "支援抹除器"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "查詢，管理和安裝新的 Cura 套件。"
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "工具箱"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5560,6 +5842,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh 讀取器"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "記錄某些事件以便在錯誤報告中使用"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "哨兵記錄器"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5570,265 +5862,250 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP 讀取器"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "提供寫入 Ultimaker 格式封包的支援。"
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP 寫入器"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "提供 Ultimaker 機器的操作（例如平台調平精靈，選擇升級等）。"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "提供匯入 Cura 舊版本列印參數的支援。"
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker 印表機操作"
+msgid "Legacy Cura Profile Reader"
+msgstr "舊版 Cura 列印參數讀取器"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "管理與 Ultimaker 網絡印表機的網絡連線。"
+msgid "Provides a prepare stage in Cura."
+msgstr "在 cura 提供一個準備介面。"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker 網絡連線"
+msgid "Prepare Stage"
+msgstr "準備介面"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "接受 G-Code 並且傳送到印表機。此外掛也可以更新韌體。"
+msgid "Provides a monitor stage in Cura."
+msgstr "在 cura 提供一個監控介面。"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB 連線列印"
+msgid "Monitor Stage"
+msgstr "監控介面"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "將設定從 Cura 2.1 版本升級至 2.2 版本。"
+msgid "Provides the X-Ray view."
+msgstr "提供透視檢視。"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "升級版本 2.1 到 2.2"
+msgid "X-Ray View"
+msgstr "透視檢視"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "將設定從 Cura 2.2 版本升級至 2.4 版本。"
+msgid "Provides support for writing 3MF files."
+msgstr "提供寫入 3MF 檔案的支援。"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "升級版本 2.2 到 2.4"
+msgid "3MF Writer"
+msgstr "3MF 寫入器"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "將設定從 Cura 2.5 版本升級至 2.6 版本。"
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "提交匿名切片資訊。這項功能可以在偏好設定中關閉。"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "升級版本 2.5 到 2.6"
+msgid "Slice info"
+msgstr "切片資訊"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "將設定從 Cura 2.6 版本升級至 2.7 版本。"
+msgid "Provides a preview stage in Cura."
+msgstr "在 Cura 提供一個預覽介面。"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "升級版本 2.6 到 2.7"
+msgid "Preview Stage"
+msgstr "預覽介面"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "將設定從 Cura 2.7 版本升級至 3.0 版本。"
+msgid "Provides the Simulation view."
+msgstr "提供模擬檢視。"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "升級版本 2.7 到 3.0"
+msgid "Simulation View"
+msgstr "模擬檢視"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "將設定從 Cura 3.0 版本升級至 3.1 版本。"
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "提供更改機器設定的方法（如列印範圍，噴頭大小等）。"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "升級版本 3.0 到 3.1"
+msgid "Machine Settings Action"
+msgstr "印表機設定操作"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "將設定從 Cura 3.2 版本升級至 3.3 版本。"
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "提供讀寫 XML 格式耗材參數的功能。"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "升級版本 3.2 到 3.3"
+msgid "Material Profiles"
+msgstr "耗材參數"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "將設定從 Cura 3.3 版本升級至 3.4 版本。"
+msgid "Provides a normal solid mesh view."
+msgstr "提供一個基本的實體網格檢視。"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "升級版本 3.3 到 3.4"
+msgid "Solid View"
+msgstr "實體檢視"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "將設定從 Cura 3.4 版本升級至 3.5 版本。"
+msgid "Provides support for importing Cura profiles."
+msgstr "提供匯入 Cura 列印參數的支援。"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "升級版本 3.4 到 3.5"
+msgid "Cura Profile Reader"
+msgstr "Cura 列印參數讀取器"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "將設定從 Cura 3.5 版本升級至 4.0 版本。"
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "提供寫入 Ultimaker 格式封包的支援。"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "升級版本 3.5 到 4.0"
+msgid "UFP Writer"
+msgstr "UFP 寫入器"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "將設定從 Cura 4.0 版本升級至 4.1 版本。"
+msgid "Writes g-code to a file."
+msgstr "將 G-code 寫入檔案。"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "升級版本 4.0 到 4.1"
+msgid "G-code Writer"
+msgstr "G-code 寫入器"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "將設定從 Cura 4.1 版本升級至 4.2 版本。"
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "支援從 2D 圖片檔案產生可列印 3D 模型的能力。"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "升級版本 4.1 到 4.2"
+msgid "Image Reader"
+msgstr "圖片讀取器"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "將設定從 Cura 4.2 版本升級至 4.3 版本。"
+msgid "Backup and restore your configuration."
+msgstr "備份和復原你的設定。"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "升級版本 4.2 到 4.3"
+msgid "Cura Backups"
+msgstr "Cura 備份"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "將設定從 Cura 4.3 版本升級至 4.4 版本。"
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "全域堆疊遺失。"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "升級版本 4.3 到 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "模型沒有封閉，標示的區域有缺少或多餘的表面。"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "將設定從 Cura 4.4 版本升級至 4.5 版本。"
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "模型錯誤"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "升級版本 4.4 到 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "層厚"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "將設定從 Cura 4.5 版本升級至 4.6 版本。"
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "連線 3D 列印的金鑰"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "升級版本 4.5 到 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- 使用更多的列印參數設定和外掛訂做你的使用體驗\n"
+#~ "- 通過同步設定可在任何地方將其載入以保持靈活性\n"
+#~ "- 透過 Ultimaker 印表機上的遠端工作流程提高效率"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "將設定從 Cura 4.6.0 版本升級至 4.6.2 版本。"
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "建立帳號"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "升級版本 4.6.0 到 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "刪除所選模型"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "將設定從 Cura 4.6.2 版本升級至 4.7 版本。"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "置中所選模型"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "升級版本 4.6.2 到 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "複製所選模型"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "將設定從 Cura 4.7 版本升級至 4.8 版本。"
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "完成"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "升級版本 4.7 到 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker 帳號"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "提供讀取 X3D 檔案的支援。"
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "連線 3D 列印的金鑰"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D 讀取器"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- 使用更多的列印參數設定和外掛訂做你的使用體驗"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "提供讀寫 XML 格式耗材參數的功能。"
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- 通過同步設定可在任何地方將其載入以保持靈活性"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "耗材參數"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- 透過 Ultimaker 印表機上的遠端工作流程提高效率"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "提供透視檢視。"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "請按照以下步驟進行設定\n"
+#~ "Ultimaker Cura。這只需要一點時間。"
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "透視檢視"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Ultimaker Cura 新功能"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/zh_TW/fdmextruder.def.json.po b/resources/i18n/zh_TW/fdmextruder.def.json.po
index 91f018db7c..f08d46af31 100644
--- a/resources/i18n/zh_TW/fdmextruder.def.json.po
+++ b/resources/i18n/zh_TW/fdmextruder.def.json.po
@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-03 14:09+0800\n"
 "Last-Translator: Zhang Heh Ji <dinowchang@gmail.com>\n"
 "Language-Team: Zhang Heh Ji <dinowchang@gmail.com>\n"
diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po
index a66cfc85f0..fbf25f8e5b 100644
--- a/resources/i18n/zh_TW/fdmprinter.def.json.po
+++ b/resources/i18n/zh_TW/fdmprinter.def.json.po
@@ -5,9 +5,9 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-10-31 15:16+0800\n"
 "Last-Translator: Zhang Heh Ji <dinowchang@gmail.com>\n"
 "Language-Team: Zhang Heh Ji <dinowchang@gmail.com>\n"
@@ -421,6 +421,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "擠出機共用一個加熱器，而不是每個擠出機都有獨立的加熱器。"
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "禁入區域"
@@ -487,8 +507,8 @@ msgstr "擠出機偏移量"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "將擠出機偏移量套用到座標軸系統。"
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -882,8 +902,8 @@ msgstr "第一層線寬倍數。增大此倍數可改善熱床附著。"
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "外殼"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -951,166 +971,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "在列印外壁後插入的空跑距離，以便消除隱藏 Z 縫的銜接痕跡。"
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "頂部表層擠出機"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "用於列印最頂部表層的擠出機組。在多擠出機情況下適用。"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "頂部表層"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "最頂部表層層數。通常只需一層最頂部就足以產生較高品質的頂部表面。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "頂部/底部擠出機"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "用於列印頂部和底部表層的擠出機組。在多擠出機情況下適用。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "頂部 / 底部厚度"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "列印模型中頂部/底部的厚度。該值除以層高決定頂部/底部的層數。"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "頂部厚度"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "列印模型中頂部的厚度。該值除以層高決定頂部的層數。"
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "頂部層數"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "頂部列印層數，當由頂部厚度來計算時層數時，會四捨五入為一個整數值。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "底部厚度"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "列印模型中底部的厚度。此值除以層高決定底部的層數。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "底部層數"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "底部列印層數，當由底部厚度來計算時層數時，會四捨五入為一個整數值。"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "起始底部層數"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "從列印平台列印的起始底部列印層數，當由底部厚度來計算時層數時，會四捨五入為一個整數值。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "頂部/底部填充樣式"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "頂部/底部的列印樣式。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "直線"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "同心"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "鋸齒狀"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "起始層列印樣式"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "列印件底部第一層的列印樣式。"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "直線"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "同心"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "鋸齒狀"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "連接頂部/底部多邊形"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "將頂部/底部表層路徑相鄰的位置連接。同心模式時啟用此設定，可以大大地減少移動時間。但因連接可能碰巧在途中跨越填充，所以此功能可能會降低頂部表層的品質。"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "頂部/底部線條方向"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "當頂部/底部採用線條或鋸齒狀的列印樣式時使用的整數線條方向的清單。清單中的元素隨層的進度依次使用，當達到清單末尾時，它將從頭開始。清單元素以逗號分隔，整個清單包含在方括號中。空的清單代表使用傳統的預設角度（45 和 135 度）。"
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "外壁內嵌"
@@ -1416,6 +1276,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "啟用時，Z 接縫座標為相對於各個部分中心的值。關閉時，座標固定在列印平台上的一個絕對位置。"
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "頂部表層擠出機"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "用於列印最頂部表層的擠出機組。在多擠出機情況下適用。"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "頂部表層"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "最頂部表層層數。通常只需一層最頂部就足以產生較高品質的頂部表面。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "頂部/底部擠出機"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "用於列印頂部和底部表層的擠出機組。在多擠出機情況下適用。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "頂部 / 底部厚度"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "列印模型中頂部/底部的厚度。該值除以層高決定頂部/底部的層數。"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "頂部厚度"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "列印模型中頂部的厚度。該值除以層高決定頂部的層數。"
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "頂部層數"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "頂部列印層數，當由頂部厚度來計算時層數時，會四捨五入為一個整數值。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "底部厚度"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "列印模型中底部的厚度。此值除以層高決定底部的層數。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "底部層數"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "底部列印層數，當由底部厚度來計算時層數時，會四捨五入為一個整數值。"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "起始底部層數"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "從列印平台列印的起始底部列印層數，當由底部厚度來計算時層數時，會四捨五入為一個整數值。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "頂部/底部填充樣式"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "頂部/底部的列印樣式。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "直線"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "同心"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "鋸齒狀"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "起始層列印樣式"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "列印件底部第一層的列印樣式。"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "直線"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "同心"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "鋸齒狀"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "連接頂部/底部多邊形"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "將頂部/底部表層路徑相鄰的位置連接。同心模式時啟用此設定，可以大大地減少移動時間。但因連接可能碰巧在途中跨越填充，所以此功能可能會降低頂部表層的品質。"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "頂部/底部線條方向"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "當頂部/底部採用線條或鋸齒狀的列印樣式時使用的整數線條方向的清單。清單中的元素隨層的進度依次使用，當達到清單末尾時，它將從頭開始。清單元素以逗號分隔，整個清單包含在方括號中。空的清單代表使用傳統的預設角度（45 和 135 度）。"
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Z 間隙無表層"
@@ -1556,6 +1586,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "調整內壁和表層中心線（的端點）之間的重疊量。輕微的重疊可以讓牆壁牢固地連接到表層。但要注意在表層和內壁線寬度相等的情形下, 超過線寬一半的值可能導致表層越過內壁, 因為此時擠出機噴嘴的位置可能已經超過了內壁線條的中間。"
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "表層移除寬度"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "要移除表層區域的最大寬度。寬度小於此值的表層區域將會消失。這有助於減少在列印模型傾斜的頂部表層和底部表層所花費的時間和耗材。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "頂部表層移除寬度"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "要移除頂部表層區域的最大寬度。寬度小於此值的頂部表層區域將會消失。這有助於減少在列印模型傾斜的頂部表層所花費的時間和耗材。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "底部表層移除寬度"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "要移除底部表層區域的最大寬度。寬度小於此值的底部表層區域將會消失。這有助於減少在列印模型傾斜的底部表層所花費的時間和耗材。"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "表層延伸距離"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使相鄰層的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "頂部表層延伸距離"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "頂部表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使上方的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "底部表層延伸距離"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "底部表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使下方的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "最大延伸表層角度"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "最小延伸表層寬度"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "如果表層區域寬度小於此值，則不會延伸。這會避免延伸在模型表面的斜度接近垂直時所形成的狹窄表層區域。"
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "填充"
@@ -1865,86 +1975,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "添加填充的最小向內突出角度。設為 0° 時，物件將完全填充，設為 90° 時，不提供任何填充。"
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "表層移除寬度"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "要移除表層區域的最大寬度。寬度小於此值的表層區域將會消失。這有助於減少在列印模型傾斜的頂部表層和底部表層所花費的時間和耗材。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "頂部表層移除寬度"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "要移除頂部表層區域的最大寬度。寬度小於此值的頂部表層區域將會消失。這有助於減少在列印模型傾斜的頂部表層所花費的時間和耗材。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "底部表層移除寬度"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "要移除底部表層區域的最大寬度。寬度小於此值的底部表層區域將會消失。這有助於減少在列印模型傾斜的底部表層所花費的時間和耗材。"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "表層延伸距離"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使相鄰層的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "頂部表層延伸距離"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "頂部表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使上方的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "底部表層延伸距離"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "底部表層延伸進入填充的距離。值愈高表層與填充之間的附著愈好，並使下方的牆壁與表層黏得更緊。而較低的值可以節省耗材的使用。"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "最大延伸表層角度"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "如果模型的頂部和/或底部表面的角度大於此設定，則不要延伸其頂部/底部表層。這會避免延伸作用在模型表面有接近垂直的斜面時所形成的狹窄表層區域。0° 的角為水平，90° 的角為垂直。"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "最小延伸表層寬度"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "如果表層區域寬度小於此值，則不會延伸。這會避免延伸在模型表面的斜度接近垂直時所形成的狹窄表層區域。"
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "表層邊緣支撐厚度"
@@ -2561,8 +2591,8 @@ msgstr "起始層速度"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "起始層的速度。建議採用較低的值以便改善與列印平台的附著。"
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5075,8 +5105,8 @@ msgstr "網格處理等級"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "決定當多個網格重疊時此網格的優先等級。在多個網格重疊的區域中，將採用處理等級值最小的網格設定。高順位的填充網格將覆蓋掉低順位和普通順位網格的填充設定。"
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5454,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "在突出部分變得可列印後突出的最大角度。當該值為 0° 時，所有突出部分將被與列印平台連接的模型的一個部分替代，如果為 90° 時，不會以任何方式更改模型。"
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "啟用滑行"
@@ -6362,6 +6402,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "在將模型從檔案中載入時套用在模型上的轉換矩陣。"
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "將擠出機偏移量套用到座標軸系統。"
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "外殼"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "如果模型的頂部和/或底部表面的角度大於此設定，則不要延伸其頂部/底部表層。這會避免延伸作用在模型表面有接近垂直的斜面時所形成的狹窄表層區域。0° 的角為水平，90° 的角為垂直。"
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "起始層的速度。建議採用較低的值以便改善與列印平台的附著。"
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "決定當多個網格重疊時此網格的優先等級。在多個網格重疊的區域中，將採用處理等級值最小的網格設定。高順位的填充網格將覆蓋掉低順位和普通順位網格的填充設定。"
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "設定列印平台的溫度。如果設定為 0，就不會加熱列印平台。"