diff options
author | Kostas Karmas <konskarm@gmail.com> | 2020-12-02 18:30:16 +0300 |
---|---|---|
committer | Kostas Karmas <konskarm@gmail.com> | 2020-12-02 18:30:16 +0300 |
commit | f18c274825c69aac2de62dcee647e7f75f9e076f (patch) | |
tree | 28898ad9dcc3029ff4764c4fa6e1687f0af54498 /resources | |
parent | 590e46cef3367f70a73735b6555b4dc8e3c2208d (diff) |
Remove duplicate settings from quality profiles
After https://github.com/Ultimaker/Cura/pull/8684 raft_airgap and speed_layer_0 existed twice in some of the quality profiles.
This commit fixes that by removing the old (calculated) values.
Diffstat (limited to 'resources')
25 files changed, 33 insertions, 66 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index 08a27aa3b4..0cef0f11da 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) raft_jerk = =jerk_layer_0 raft_margin = 10 @@ -33,6 +33,5 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width -raft_airgap = 0.4 raft_surface_speed = 45 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index 9a8ed386c0..3ed16d3420 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) @@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index 615e8cc487..75619973a8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index 10149781cb..5edfda7541 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) @@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index 137a316f14..6aba500231 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) @@ -27,4 +27,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index f98d5c5d70..4949817547 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 9e4d40bcf3..026783cf17 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -23,13 +23,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -37,6 +37,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 755127b66f..f23ad38956 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 26f0b52f91..b97c0b9ffe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -22,13 +22,13 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 @@ -36,6 +36,4 @@ wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index c5613e0f49..81be2ebb6d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) @@ -35,4 +35,3 @@ acceleration_wall = 2000 acceleration_wall_0 = 2000 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 17967f923c..e57fc51db1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) @@ -31,4 +31,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 1c271f6af1..5abeff6589 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 @@ -33,4 +33,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 0aae33c115..56ab049b3b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 top_bottom_thickness = 1 wall_thickness = 1 @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 193e6de18b..5689aaff8b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -20,7 +20,7 @@ material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False skin_overlap = 20 speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) @@ -30,4 +30,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index 1aae14fe6b..854858ee5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 60 -speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) @@ -29,4 +29,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 1c57587309..bb75703f87 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) @@ -28,4 +28,3 @@ infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index ec2819cf93..4c850c4904 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -19,11 +19,10 @@ material_initial_print_temperature = =material_print_temperature - 15 material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False speed_print = 55 -speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index 0f1f2c872b..bd42d349c5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index d3e3e43830..9fe2328c88 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -23,19 +23,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 4a838d3b02..6bfd398d12 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 8c86a63b0b..7832217f95 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -22,19 +22,17 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 ooze_shield_angle = 40 raft_acceleration = =acceleration_layer_0 -raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_airgap = 0.4 raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) skin_overlap = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width jerk_travel = 50 -raft_airgap = 0.4 raft_surface_speed = 45 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 25235ba336..dd674e9a6b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0 skin_overlap = 20 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) @@ -35,4 +35,3 @@ layer_height_0 = 0.2 acceleration_wall = 2000 acceleration_wall_0 = 2000 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index f9ed0bc62a..d743e3fc31 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 70 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) @@ -30,4 +30,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 23042d0f23..4c69195362 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 50 -speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 @@ -32,4 +32,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index c0414898af..462e2b37bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_layer_0 = 10 top_bottom_thickness = 1 wall_thickness = 1 @@ -28,4 +28,3 @@ jerk_travel = 50 infill_line_width = =round(line_width * 0.42 / 0.35, 2) layer_height_0 = 0.2 raft_airgap = 0.25 -speed_layer_0 = 10 |