Merge branch 'main' into patch-1

252 files changed, 344 insertions, 479 deletions

diff --git a/resources/definitions/SV02.def.json b/resources/definitions/SV02.def.json
index 352cd23394..b718f19a9a 100644
--- a/resources/definitions/SV02.def.json
+++ b/resources/definitions/SV02.def.json
@@ -28,7 +28,7 @@
         "retraction_speed": { "default_value": 50},

         "gantry_height": { "value": "30" },

         "speed_print": { "default_value": 50 },		

-	    "material_print_temperature": { "value": 195 },

+	    "default_material_print_temperature": { "value": 195 },

         "material_print_temperature_layer_0": { "value": "material_print_temperature" },

         "material_initial_print_temperature": { "value": "material_print_temperature" },

         "material_final_print_temperature": { "value": 195 },		

@@ -41,11 +41,9 @@
         "machine_max_acceleration_z": { "value": 100 },

         "machine_max_acceleration_e": { "value": 500 },

         "machine_acceleration": { "value": 500 },

-        "machine_max_jerk_xy": { "value": 8 },

-        "machine_max_jerk_z": { "value": 0.4 },

-        "machine_max_jerk_e": { "value": 5 },

+

         "material_diameter": { "default_value": 1.75 },

-        "infill_overlap": { "default_value": 15	},

+

         "acceleration_print": { "value": 500 },

         "acceleration_travel": { "value": 500 },

         "acceleration_travel_layer_0": { "value": "acceleration_travel" },

diff --git a/resources/definitions/crazy3dprint_cz_300.def.json b/resources/definitions/crazy3dprint_cz_300.def.json
index 56d3d69757..2748b39b53 100644
--- a/resources/definitions/crazy3dprint_cz_300.def.json
+++ b/resources/definitions/crazy3dprint_cz_300.def.json
@@ -36,9 +36,8 @@
 		"min_infill_area": {  "default_value": 2.0 },
 		"retract_at_layer_change": { "default_value": true },
 		"default_material_print_temperature": {  "default_value": 210 },
-		"material_print_temperature": { "value": 210 },
 		"material_final_print_temperature": {  "value": 210 },
-		"material_bed_temperature": { "value": 70 },
+		"default_material_bed_temperature": { "value": 70 },
         "material_bed_temperature_layer_0": {  "value": 70 },
 		"material_flow_layer_0": {"value": 140},
 		"retraction_amount": {  "default_value": 10 },
diff --git a/resources/definitions/creality_ender6.def.json b/resources/definitions/creality_ender6.def.json
index 72dd042abd..599d3beb86 100644
--- a/resources/definitions/creality_ender6.def.json
+++ b/resources/definitions/creality_ender6.def.json
@@ -1,17 +1,14 @@
 {

-    "name": "Creality Ender-3 Pro",

+    "name": "Creality Ender-6",

     "version": 2,

     "inherits": "creality_base",

-    "metadata": {

-        "quality_definition": "creality_base",

-        "visible": true,

-        "platform": "creality_ender3.3mf"

-    },

     "overrides": {

-        "machine_name": { "default_value": "Creality Ender-3 Pro" },

-        "machine_width": { "default_value": 220 },

-        "machine_depth": { "default_value": 220 },

-        "machine_height": { "default_value": 250 },

+        "machine_name": { "default_value": "Creality Ender-6" },

+        "machine_start_gcode": { "default_value": "\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},

+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },

+        "machine_width": { "default_value": 260 },

+        "machine_depth": { "default_value": 260 },

+        "machine_height": { "default_value": 400 },

         "machine_head_with_fans_polygon": { "default_value": [

                 [-26, 34],

                 [-26, -32],

@@ -19,10 +16,14 @@
                 [32, 34]

             ]

         },

-        "machine_start_gcode": {

-            "default_value": "; Ender 3 Custom Start G-code\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM104 S{material_standby_temperature} ; Start heating up the nozzle most of the way\nM190 S{material_bed_temperature_layer_0} ; Start heating the bed, wait until target temperature reached\nM109 S{material_print_temperature_layer_0} ; Finish heating the nozzle\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"

-        },

 

-        "gantry_height": { "value": 25 }

+        "gantry_height": { "value": 25 },

+

+        "speed_print": { "value": 80.0 }

+        

+    },

+    "metadata": {

+        "quality_definition": "creality_base",

+        "visible": true

     }

 }

diff --git a/resources/definitions/cremaker_common.def.json b/resources/definitions/cremaker_common.def.json
index 6fd339f58f..48b7d4042c 100644
--- a/resources/definitions/cremaker_common.def.json
+++ b/resources/definitions/cremaker_common.def.json
@@ -24,7 +24,6 @@
     "xy_offset": { "value": 0.1 },
     "xy_offset_layer_0": { "value": -0.1 },
     "hole_xy_offset": { "value": 0.15 },
-    "material_print_temperature": { "value": 200 },
     "speed_travel": { "value": 100 },
     "speed_layer_0": { "value": 25 },
     "acceleration_enabled": { "value": true },
diff --git a/resources/definitions/eryone_er20.def.json b/resources/definitions/eryone_er20.def.json
index 2f5f02d7db..c19a8b1035 100644
--- a/resources/definitions/eryone_er20.def.json
+++ b/resources/definitions/eryone_er20.def.json
@@ -53,7 +53,7 @@
         "machine_end_gcode": {
             "default_value": "G91 ;Relative positioning\nG1 Z5 F720 ;Raise Z\nG1 E-5 F300 ;Retract a bit to protect nozzle\nM104 S0 ;Turn off extruder\nM140 S0 ;Turn off bed\nM107 ;Turn off all fans\nG90 ;Absolute positioning\nG1 X230 Y200 F4800 ;Parking the hotend\nM84 X Y E ;All steppers off but left Z\n"
         },
-        "material_print_temperature": {
+        "default_material_print_temperature": {
             "value": 205
         },
         "material_print_temperature_layer_0": {
@@ -103,7 +103,7 @@
         "infill_before_walls": {
             "value": false
         },
-        "material_bed_temperature": {
+        "default_material_bed_temperature": {
             "value": 60
         },
         "material_bed_temperature_layer_0": {
diff --git a/resources/definitions/eryone_thinker.def.json b/resources/definitions/eryone_thinker.def.json
index 33c96f45ca..e2dbd44215 100644
--- a/resources/definitions/eryone_thinker.def.json
+++ b/resources/definitions/eryone_thinker.def.json
@@ -138,7 +138,6 @@
             "value": "material_print_temperature"
         },
         "material_bed_temperature": {
-            "value": "default_material_bed_temperature",
             "maximum_value_warning": 100
         },
         "material_bed_temperature_layer_0": {
diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json
index 4a40d1855a..a4c6019959 100644
--- a/resources/definitions/fdmprinter.def.json
+++ b/resources/definitions/fdmprinter.def.json
@@ -1443,7 +1443,63 @@
                     "value": "0",
                     "limit_to_extruder": "roofing_extruder_nr",
                     "settable_per_mesh": true,
-                    "enabled": "top_layers > 0"
+                    "enabled": "top_layers > 0",
+                    "children": {
+                        "roofing_line_width":
+                        {
+                            "label": "Top Surface Skin Line Width",
+                            "description": "Width of a single line of the areas at the top of the print.",
+                            "unit": "mm",
+                            "minimum_value": "0.001",
+                            "minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
+                            "maximum_value_warning": "2 * machine_nozzle_size",
+                            "default_value": 0.4,
+                            "type": "float",
+                            "value": "skin_line_width",
+                            "limit_to_extruder": "roofing_extruder_nr",
+                            "settable_per_mesh": true,
+                            "enabled": "roofing_layer_count > 0 and top_layers > 0"
+                        },
+                        "roofing_pattern":
+                        {
+                            "label": "Top Surface Skin Pattern",
+                            "description": "The pattern of the top most layers.",
+                            "type": "enum",
+                            "options":
+                            {
+                                "lines": "Lines",
+                                "concentric": "Concentric",
+                                "zigzag": "Zig Zag"
+                            },
+                            "default_value": "lines",
+                            "value": "top_bottom_pattern",
+                            "limit_to_extruder": "roofing_extruder_nr",
+                            "settable_per_mesh": true,
+                            "enabled": "roofing_layer_count > 0 and top_layers > 0"
+                        },
+                        "roofing_monotonic":
+                        {
+                            "label": "Monotonic Top Surface Order",
+                            "description": "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent.",
+                            "type": "bool",
+                            "default_value": false,
+                            "value": "skin_monotonic",
+                            "enabled": "roofing_layer_count > 0 and top_layers > 0 and roofing_pattern != 'concentric'",
+                            "limit_to_extruder": "roofing_extruder_nr",
+                            "settable_per_mesh": true
+                        },
+                        "roofing_angles":
+                        {
+                            "label": "Top Surface Skin Line Directions",
+                            "description": "A list of integer line directions to use when the top surface skin layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees).",
+                            "type": "[int]",
+                            "default_value": "[ ]",
+                            "value": "skin_angles",
+                            "enabled": "roofing_pattern != 'concentric' and roofing_layer_count > 0 and top_layers > 0",
+                            "limit_to_extruder": "roofing_extruder_nr",
+                            "settable_per_mesh": true
+                        }
+                    }
                 },
                 "top_bottom_extruder_nr":
                 {
@@ -4482,6 +4538,20 @@
                     "settable_per_mesh": false,
                     "settable_per_extruder": true
                 },
+                "support_tree_max_diameter":
+                {
+                    "label": "Tree Support Trunk Diameter",
+                    "description": "The diameter of the widest branches of tree support. A thicker trunk is more sturdy; a thinner trunk takes up less space on the build plate.",
+                    "unit": "mm",
+                    "type": "float",
+                    "minimum_value": "support_tree_branch_diameter",
+                    "minimum_value_warning": "support_line_width * 5",
+                    "default_value": 15,
+                    "limit_to_extruder": "support_infill_extruder_nr",
+                    "enabled": "support_enable and support_structure=='tree'",
+                    "settable_per_mesh": false,
+                    "settable_per_extruder": true
+                },
                 "support_tree_branch_diameter_angle":
                 {
                     "label": "Tree Support Branch Diameter Angle",
@@ -6335,6 +6405,7 @@
                     "description": "Remove the holes in each layer and keep only the outside shape. This will ignore any invisible internal geometry. However, it also ignores layer holes which can be viewed from above or below.",
                     "type": "bool",
                     "default_value": false,
+                    "value": "magic_spiralize",
                     "settable_per_mesh": true
                 },
                 "meshfix_extensive_stitching":
@@ -6645,60 +6716,6 @@
                     "default_value": "middle",
                     "settable_per_mesh": true
                 },
-                "roofing_line_width":
-                {
-                    "label": "Top Surface Skin Line Width",
-                    "description": "Width of a single line of the areas at the top of the print.",
-                    "unit": "mm",
-                    "minimum_value": "0.001",
-                    "minimum_value_warning": "0.1 + 0.4 * machine_nozzle_size",
-                    "maximum_value_warning": "2 * machine_nozzle_size",
-                    "default_value": 0.4,
-                    "type": "float",
-                    "value": "skin_line_width",
-                    "limit_to_extruder": "roofing_extruder_nr",
-                    "settable_per_mesh": true,
-                    "enabled": "roofing_layer_count > 0 and top_layers > 0"
-                },
-                "roofing_pattern":
-                {
-                    "label": "Top Surface Skin Pattern",
-                    "description": "The pattern of the top most layers.",
-                    "type": "enum",
-                    "options":
-                    {
-                        "lines": "Lines",
-                        "concentric": "Concentric",
-                        "zigzag": "Zig Zag"
-                    },
-                    "default_value": "lines",
-                    "value": "top_bottom_pattern",
-                    "limit_to_extruder": "roofing_extruder_nr",
-                    "settable_per_mesh": true,
-                    "enabled": "roofing_layer_count > 0 and top_layers > 0"
-                },
-                "roofing_monotonic":
-                {
-                    "label": "Monotonic Top Surface Order",
-                    "description": "Print top surface lines in an ordering that causes them to always overlap with adjacent lines in a single direction. This takes slightly more time to print, but makes flat surfaces look more consistent.",
-                    "type": "bool",
-                    "default_value": false,
-                    "value": "skin_monotonic",
-                    "enabled": "roofing_layer_count > 0 and top_layers > 0 and roofing_pattern != 'concentric'",
-                    "limit_to_extruder": "roofing_extruder_nr",
-                    "settable_per_mesh": true
-                },
-                "roofing_angles":
-                {
-                    "label": "Top Surface Skin Line Directions",
-                    "description": "A list of integer line directions to use when the top surface skin layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees).",
-                    "type": "[int]",
-                    "default_value": "[ ]",
-                    "value": "skin_angles",
-                    "enabled": "roofing_pattern != 'concentric' and roofing_layer_count > 0 and top_layers > 0",
-                    "limit_to_extruder": "roofing_extruder_nr",
-                    "settable_per_mesh": true
-                },
                 "infill_enable_travel_optimization":
                 {
                     "label": "Infill Travel Optimization",
diff --git a/resources/definitions/hms434.def.json b/resources/definitions/hms434.def.json
index 80466d45bd..bf5a601dbd 100644
--- a/resources/definitions/hms434.def.json
+++ b/resources/definitions/hms434.def.json
@@ -113,7 +113,6 @@
         "material_initial_print_temperature":     {"value": "material_print_temperature",
                                                    "maximum_value_warning": "material_print_temperature + 15",
                                                    "maximum_value": "401" },
-        "material_initial_print_temperature":     {"maximum_value": "401" },
         "material_final_print_temperature":       {"value": "material_print_temperature",
                                                    "maximum_value": "401" },
         "material_break_preparation_temperature": {"maximum_value": "401" },
diff --git a/resources/definitions/koonovo_base.def.json b/resources/definitions/koonovo_base.def.json
index bb984d6650..c2713c7a44 100644
--- a/resources/definitions/koonovo_base.def.json
+++ b/resources/definitions/koonovo_base.def.json
@@ -58,7 +58,7 @@
         "infill_sparse_density": { "value": "15" },
         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
     
-        "material_print_temperature": { "value": "195" }, 
+        "default_material_print_temperature": { "value": "195" },
         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_final_print_temperature": { "value": "material_print_temperature" },
diff --git a/resources/definitions/koonovo_kn3.def.json b/resources/definitions/koonovo_kn3.def.json
index dc0c40837d..485190958d 100644
--- a/resources/definitions/koonovo_kn3.def.json
+++ b/resources/definitions/koonovo_kn3.def.json
@@ -75,12 +75,11 @@
         "infill_sparse_density": { "value": "15" },

         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },

     

-        "material_print_temperature": { "value": "195" }, 

+        "default_material_print_temperature": { "value": "195" },

         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       

         "material_initial_print_temperature": { "value": "material_print_temperature" },

         "material_final_print_temperature": { "value": "material_print_temperature" },

-        "material_bed_temperature": { "value": "55" },       

-        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },

+        "default_material_bed_temperature": { "value": "55" },

         "material_flow": { "value": 100 },

         "material_standby_temperature": { "value": "material_print_temperature" },

 

diff --git a/resources/definitions/koonovo_kn5.def.json b/resources/definitions/koonovo_kn5.def.json
index 9870c85eb6..8b517a232a 100644
--- a/resources/definitions/koonovo_kn5.def.json
+++ b/resources/definitions/koonovo_kn5.def.json
@@ -77,13 +77,12 @@
         "infill_sparse_density": { "value": "15" },

         "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },

     

-        "material_print_temperature": { "value": "195" }, 

+        "default_material_print_temperature": { "value": "195" },

         "material_print_temperature_layer_0": { "value": "material_print_temperature" },       

         "material_initial_print_temperature": { "value": "material_print_temperature" },

         "material_final_print_temperature": { "value": "material_print_temperature" },

         "material_standby_temperature": { "value": "material_print_temperature" },

-        "material_bed_temperature": { "value": "45" },       

-        "material_bed_temperature_layer_0": { "value": "material_bed_temperature" },

+        "default_material_bed_temperature": { "value": "45" },

         "material_flow": { "value": 100 },

 

         "speed_print": { "value": 50.0 } ,

diff --git a/resources/definitions/maker_made_300x.def.json b/resources/definitions/maker_made_300x.def.json
index 70479856e3..0be2112bed 100644
--- a/resources/definitions/maker_made_300x.def.json
+++ b/resources/definitions/maker_made_300x.def.json
@@ -68,7 +68,6 @@
         "infill_support_enabled": {"value": false },

         "max_skin_angle_for_expansion": {"value": 90},

         "default_material_print_temperature": {"value": 220},

-        "material_print_temperature": {"value": 220},

         "material_print_temperature_layer_0": {"value": 220},

         "material_initial_print_temperature": {"value": 220},

         "material_final_print_temperature": {"value": 220},

diff --git a/resources/definitions/renkforce_rf100.def.json b/resources/definitions/renkforce_rf100.def.json
index 7ad092ce8f..f241df9a44 100644
--- a/resources/definitions/renkforce_rf100.def.json
+++ b/resources/definitions/renkforce_rf100.def.json
@@ -104,7 +104,7 @@
         "material_flow": {
             "value": "110"
         },
-        "material_print_temperature": {
+        "default_material_print_temperature": {
             "value": "210.0"
         },
         "ooze_shield_enabled": {
diff --git a/resources/definitions/renkforce_rf100_v2.def.json b/resources/definitions/renkforce_rf100_v2.def.json
index 05907a1c20..881b5c94ca 100644
--- a/resources/definitions/renkforce_rf100_v2.def.json
+++ b/resources/definitions/renkforce_rf100_v2.def.json
@@ -104,9 +104,6 @@
         "material_flow": {
             "value": "110"
         },
-        "material_print_temperature": {
-            "value": "210.0"
-        },
         "ooze_shield_enabled": {
             "value": "True"
         },
diff --git a/resources/definitions/renkforce_rf100_xl.def.json b/resources/definitions/renkforce_rf100_xl.def.json
index f0e8644ae4..f0e26487f1 100644
--- a/resources/definitions/renkforce_rf100_xl.def.json
+++ b/resources/definitions/renkforce_rf100_xl.def.json
@@ -92,9 +92,6 @@
         "material_bed_temperature": {
             "value": "70"
         },
-        "material_print_temperature": {
-            "value": "210.0"
-        },
         "ooze_shield_enabled": {
             "value": "True"
         },
diff --git a/resources/definitions/skriware_2.def.json b/resources/definitions/skriware_2.def.json
index dbcf140585..7bb6968865 100644
--- a/resources/definitions/skriware_2.def.json
+++ b/resources/definitions/skriware_2.def.json
@@ -30,8 +30,11 @@
     "support_skip_zag_per_mm": {
       "default_value": 10
     },
+    "default_material_bed_temperature":
+    {
+      "value": "50"
+    },
     "material_bed_temperature": {
-      "value": "50",
       "minimum_value_warning": "30",
       "resolve": "extruderValues('material_bed_temperature')[adhesion_extruder_nr] if resolveOrValue('adhesion_type') == 'raft' else max(extruderValues('material_bed_temperature'))"
     },
@@ -366,9 +369,6 @@
     "z_seam_x": {
       "value": "115"
     },
-    "material_print_temperature": {
-      "value": "195"
-    },
     "material_bed_temperature_layer_0": {
       "value": "50",
       "minimum_value_warning": "30",
diff --git a/resources/definitions/ultimaker.def.json b/resources/definitions/ultimaker.def.json
index f9f686c69b..57d6904aaf 100644
--- a/resources/definitions/ultimaker.def.json
+++ b/resources/definitions/ultimaker.def.json
@@ -24,6 +24,7 @@
             "maximum_value_warning": "125"
         },
         "material_standby_temperature": {
+            "value": "material_print_temperature - 100",
             "minimum_value": "0"
         },
         "extruder_prime_pos_y":
diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index 38428b89ca..ddb02b7810 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -109,7 +109,6 @@
         "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
         "material_bed_temperature": { "maximum_value": "115" },
         "material_bed_temperature_layer_0": { "maximum_value": "115" },
-        "material_standby_temperature": { "value": "100" },
         "multiple_mesh_overlap": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "default_value": true },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 743ab7f478..5ccbc2c5a0 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -98,7 +98,6 @@
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
-        "material_standby_temperature": { "value": "100" },
         "multiple_mesh_overlap": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },
         "prime_tower_enable": { "value": "True" },
@@ -134,7 +133,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "initial_layer_line_width_factor": { "value": "120" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index da0367f571..9eb00e6155 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -100,7 +100,6 @@
         "layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
         "machine_min_cool_heat_time_window": { "value": "15" },
         "default_material_print_temperature": { "value": "200" },
-        "material_standby_temperature": { "value": "100" },
         "multiple_mesh_overlap": { "value": "0" },
         "prime_tower_enable": { "value": "True" },
         "raft_airgap": { "value": "0" },
@@ -136,7 +135,6 @@
         "switch_extruder_prime_speed": { "value": "15" },
         "switch_extruder_retraction_amount": { "value": "8" },
         "top_bottom_thickness": { "value": "1" },
-        "travel_avoid_supports": { "value": "True" },
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_0_inset": { "value": "0" },
         "optimize_wall_printing_order": { "value": "True" },
diff --git a/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml b/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml
index e8917517dd..bcbb6d7679 100644
--- a/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml
+++ b/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml
@@ -221,10 +221,7 @@ Button
         }
     }
 
-    Component.onCompleted:
-    {
-        configurationItem.checked = Cura.MachineManager.matchesConfiguration(configuration)
-    }
+    Component.onCompleted: configurationItem.checked = Cura.MachineManager.matchesConfiguration(configuration)
 
     onClicked:
     {
diff --git a/resources/qml/PrinterSelector/MachineListButton.qml b/resources/qml/PrinterSelector/MachineListButton.qml
index 4511c72b4c..70e7564aa9 100644
--- a/resources/qml/PrinterSelector/MachineListButton.qml
+++ b/resources/qml/PrinterSelector/MachineListButton.qml
@@ -7,81 +7,133 @@ import QtQuick.Controls 2.3
 import UM 1.5 as UM
 import Cura 1.0 as Cura
 
-
-Button
-{
-    id: machineListButton
-
+Loader {
+    id: loader
     width: parent.width
-    height: UM.Theme.getSize("large_button").height
-    leftPadding: UM.Theme.getSize("default_margin").width
-    rightPadding: UM.Theme.getSize("default_margin").width
-    checkable: true
-    hoverEnabled: true
+    sourceComponent: {
+        switch (model.componentType) {
+            case "HIDE_BUTTON":
+                hideButtonComponent
+                break;
+            case "SHOW_BUTTON":
+                showButtonComponent
+                break;
+            case "MACHINE":
+                machineListButtonComponent
+                break;
+            default:
+        }
+    }
+    property var onClicked
 
-    contentItem: Item
+    Component
     {
-        width: machineListButton.width - machineListButton.leftPadding - machineListButton.rightPadding
-        height: UM.Theme.getSize("action_button").height
-
-        UM.ColorImage
+        id: hideButtonComponent
+        Cura.TertiaryButton
         {
-            id: printerIcon
-            height: UM.Theme.getSize("medium_button").height
-            width: UM.Theme.getSize("medium_button").width
-            color: UM.Theme.getColor("machine_selector_printer_icon")
-            visible: model.machineType == "abstract_machine" || !model.isOnline
-            source: model.machineType == "abstract_machine" ? UM.Theme.getIcon("PrinterTriple", "medium") : UM.Theme.getIcon("Printer", "medium")
-
-            anchors
-            {
-                left: parent.left
-                verticalCenter: parent.verticalCenter
-            }
+            text: catalog.i18nc("@label", "Hide all connected printers")
+            height: UM.Theme.getSize("large_button").height
+            onClicked: if (loader.onClicked) loader.onClicked()
+            iconSource: UM.Theme.getIcon("ChevronSingleUp")
+            width: parent.width
         }
+    }
 
-        UM.Label
+    Component
+    {
+        id: showButtonComponent
+        Cura.TertiaryButton
         {
-            id: buttonText
-            anchors
-            {
-                left: printerIcon.right
-                right: printerCount.left
-                verticalCenter: parent.verticalCenter
-                leftMargin: UM.Theme.getSize("default_margin").width
-            }
-            text: machineListButton.text
-            font: model.machineType == "abstract_machine" ? UM.Theme.getFont("medium_bold") : UM.Theme.getFont("medium")
-            visible: text != ""
-            elide: Text.ElideRight
+            text: catalog.i18nc("@label", "Show all connected printers")
+            height: UM.Theme.getSize("large_button").height
+            onClicked: if (loader.onClicked) loader.onClicked()
+            iconSource: UM.Theme.getIcon("ChevronSingleDown")
+            width: parent.width
         }
+    }
 
-        Rectangle
+    Component
+    {
+        id: machineListButtonComponent
+
+        Button
         {
-            id: printerCount
-            color: UM.Theme.getColor("background_2")
-            radius: height
-            width: height
-            anchors
+            id: machineListButton
+
+            onClicked: if (loader.onClicked) loader.onClicked()
+
+            width: parent.width
+            height: UM.Theme.getSize("large_button").height
+            leftPadding: UM.Theme.getSize("default_margin").width
+            rightPadding: UM.Theme.getSize("default_margin").width
+            checkable: true
+            hoverEnabled: true
+
+            contentItem: Item
             {
-                right: parent.right
-                top: buttonText.top
-                bottom: buttonText.bottom
+                width: machineListButton.width - machineListButton.leftPadding - machineListButton.rightPadding
+                height: UM.Theme.getSize("action_button").height
+
+                UM.ColorImage
+                {
+                    id: printerIcon
+                    height: UM.Theme.getSize("medium_button").height
+                    width: UM.Theme.getSize("medium_button").width
+                    color: UM.Theme.getColor("machine_selector_printer_icon")
+                    visible: model.isAbstractMachine || !model.isOnline
+                    source: model.isAbstractMachine ? UM.Theme.getIcon("PrinterTriple", "medium") : UM.Theme.getIcon("Printer", "medium")
+
+                    anchors
+                    {
+                        left: parent.left
+                        verticalCenter: parent.verticalCenter
+                    }
+                }
+
+                UM.Label
+                {
+                    id: buttonText
+                    anchors
+                    {
+                        left: printerIcon.right
+                        right: printerCount.left
+                        verticalCenter: parent.verticalCenter
+                        leftMargin: UM.Theme.getSize("default_margin").width
+                    }
+                    text: model.name ? model.name : ""
+                    font: model.isAbstractMachine ? UM.Theme.getFont("medium_bold") : UM.Theme.getFont("medium")
+                    visible: text != ""
+                    elide: Text.ElideRight
+                }
+
+                Rectangle
+                {
+                    id: printerCount
+                    color: UM.Theme.getColor("background_2")
+                    radius: height
+                    width: height
+                    anchors
+                    {
+                        right: parent.right
+                        top: buttonText.top
+                        bottom: buttonText.bottom
+                    }
+                    visible: model.isAbstractMachine ? model.isAbstractMachine : false
+
+                    UM.Label
+                    {
+                        text: model.machineCount ? model.machineCount : ""
+                        anchors.centerIn: parent
+                        font: UM.Theme.getFont("default_bold")
+                    }
+                }
             }
-            visible: model.machineType == "abstract_machine"
 
-            UM.Label
+            background: Rectangle
             {
-                text: model.machineCount
-                anchors.centerIn: parent
-                font: UM.Theme.getFont("default_bold")
+                id: backgroundRect
+                color: machineListButton.hovered ? UM.Theme.getColor("action_button_hovered") : "transparent"
             }
         }
     }
-
-    background: Rectangle
-    {
-        id: backgroundRect
-        color: machineListButton.hovered ? UM.Theme.getColor("action_button_hovered") : "transparent"
-    }
 }
diff --git a/resources/qml/PrinterSelector/MachineSelector.qml b/resources/qml/PrinterSelector/MachineSelector.qml
index 869d536a00..0008529408 100644
--- a/resources/qml/PrinterSelector/MachineSelector.qml
+++ b/resources/qml/PrinterSelector/MachineSelector.qml
@@ -223,7 +223,6 @@ Cura.ExpandablePopup
             id: buttonRow
 
             anchors.bottom: parent.bottom
-            anchors.horizontalCenter: parent.horizontalCenter
             anchors.left: parent.left
             anchors.right: parent.right
 
diff --git a/resources/qml/PrinterSelector/MachineSelectorList.qml b/resources/qml/PrinterSelector/MachineSelectorList.qml
index 06c2fdb40c..a328ae69d9 100644
--- a/resources/qml/PrinterSelector/MachineSelectorList.qml
+++ b/resources/qml/PrinterSelector/MachineSelectorList.qml
@@ -22,8 +22,8 @@ ListView
     section.delegate: UM.Label
     {
         text: section == "true" ? catalog.i18nc("@label", "Connected printers") : catalog.i18nc("@label", "Other printers")
-        width: parent.width - scrollBar.width
         height: UM.Theme.getSize("action_button").height
+        width: parent.width - scrollBar.width
         leftPadding: UM.Theme.getSize("default_margin").width
         font: UM.Theme.getFont("medium")
         color: UM.Theme.getColor("text_medium")
@@ -31,13 +31,23 @@ ListView
 
     delegate: MachineListButton
     {
-        text: model.name ? model.name : ""
         width: listView.width - scrollBar.width
 
-        onClicked:
+        onClicked: function()
         {
-            toggleContent()
-            Cura.MachineManager.setActiveMachine(model.id)
+            switch (model.componentType) {
+                case "HIDE_BUTTON":
+                    listView.model.setShowCloudPrinters(false);
+                    break;
+                case "SHOW_BUTTON":
+                    listView.model.setShowCloudPrinters(true);
+                    break;
+                case "MACHINE":
+                    toggleContent()
+                    Cura.MachineManager.setActiveMachine(model.id)
+                    break;
+                default:
+            }
         }
     }
 }
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
index f200457a62..5678217664 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
index 2e2ae52399..bb2ed82e47 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.8
 machine_nozzle_heat_up_speed = 1.5
-material_standby_temperature = 100
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 15
 material_initial_print_temperature = =material_print_temperature - 5
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
index eae553f0ee..ea70e963cb 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature_layer_0 = =material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index 7a69d14931..eeffba6de3 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index e7b6c725dd..e8802d28cc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -24,7 +24,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index fb2e0330ef..45a2d6d896 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -26,7 +26,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index 074270e0ec..f9dff14d6a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -25,7 +25,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
index e43e125e89..7f33b0e11c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
index b676573793..98a0b3c5a1 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
index 5fe79e7351..de3842c18f 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
index a21f8c3bdf..f9263edaf5 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
index 5d08d0534b..94e99ee79d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
index 0f6323ba1d..054784226a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
index 8e16021f89..b534a68129 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
index 432c6ef3d9..e3e027a62b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index df4ea5ffab..48393099d2 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -31,7 +31,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 5d01ce5f28..5ecbe7b8cd 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -29,7 +29,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index dd6b9063b9..aff9a53cd7 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -31,7 +31,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 7bed5ac6d2..948e1a5180 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -28,7 +28,6 @@ machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
index 77e631a969..3c815ce6bc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
index 3a6c9fcfd5..4bcf604e87 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
index 335593cab2..3b4676aedf 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
-material_standby_temperature = 100
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
index d260cfbc2d..94ebaaf3cd 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
index 757d988b76..302e1284a0 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 80
 speed_layer_0 = =math.ceil(speed_print * 20 / 80)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
index 7ee4ae5fd9..e12f054442 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_print = 60
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
index 35ffb3a3f3..b3579468ae 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index c151870622..95ec7d97a8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -32,7 +32,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index 7e21bec438..e6a7d11f43 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -32,7 +32,6 @@ material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index c47bfb3c18..06256a73dc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg
index 227b16db92..bac7a7b48b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg
index e668141c2f..984e51d1bf 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg
index 12d0256deb..29ddedf4a7 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -19,7 +19,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
-material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index 9c02ed5200..6f2a606ac2 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -32,7 +32,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index fe3f453f9c..9747894cf6 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -32,7 +32,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_amount = 7
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index c824bc59ab..c27f3ced54 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg
index 2720faa577..af0ac8c663 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.8
 
 [values]
 material_print_temperature = =default_material_print_temperature + 25
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg
index fd8e40e1a6..f28d24c04c 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 layer_height = 0.4
 material_print_temperature = =default_material_print_temperature + 30
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 37 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg
index 5936e1edbd..8ee24fed22 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 layer_height = 0.3
 material_print_temperature = =default_material_print_temperature + 27
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
index 4a92c4e0ef..c2d9a6d8c9 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -19,7 +19,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_hop = 0.1
 retraction_hop_enabled = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 58a7da1b9d..e48299aba3 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_hop = 0.1
 retraction_hop_enabled = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 901db7e3ab..08181bd2ee 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_hop = 0.1
 retraction_hop_enabled = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg
index 3f277bdf50..cd77fa7a1b 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 brim_width = 15
 material_print_temperature = =default_material_print_temperature + 15
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg
index 1cfd1a7132..3758ea96f7 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 layer_height = 0.4
 material_print_temperature = =default_material_print_temperature + 20
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg
index 0cb877bc19..9061c25db4 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 layer_height = 0.3
 material_print_temperature = =default_material_print_temperature + 17
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
index b90e50c955..5013bcb3f8 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index cd6fa26ba8..fb59a2aa76 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 layer_height = 0.4
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index b075a97c8e..23587d6a81 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 layer_height = 0.3
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg
index 30ed901c9e..df89b2769b 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg
@@ -17,7 +17,6 @@ brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
index d1785e2892..0532884c0e 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
 layer_height = 0.4
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
index 2b18f0b407..91f11ad52a 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 layer_height = 0.3
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg
index fc1a36f83f..5e296b117a 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 brim_width = 7
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg
index f8d6b4df20..7b203fe360 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 layer_height = 0.4
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg
index 2e34cf5d2b..1117ab1a43 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 layer_height = 0.3
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
index 7e0fdd459a..bd6a63d912 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
index 228358c8a0..138f2f1e4b 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 15
-material_standby_temperature = 100
 prime_tower_enable = True
 raft_margin = 10
 retract_at_layer_change = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
index df8a7a4d29..b69188646b 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 5ac58234fd..6b0cabd0ea 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index 0975a2dcaa..0baec213e4 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index a18414cf7e..05ea628527 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 layer_height = 0.3
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index ffc82adfb2..de029fef56 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index 9d5a364a53..21ebf50a79 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 07c6aa807e..bc910a1ae6 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -26,7 +26,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature +15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index bc8a252e97..3b8a6076de 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
index 5ac88c13bc..d04b46e2d6 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
index 7ad6967e6b..e3d7255d36 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = BB 0.4
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
index add681b5c6..e68bf36fc8 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =3*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
index fbf7d65477..e96a8afcfb 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
index d7003ca582..21cce522c3 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
index 07b91499e4..fba29334a2 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
index 6177272235..606515e129 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 886807a836..49ecf8eb7c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index e5b88f2d77..5d04d3730c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -12,15 +12,11 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index 1c0ac78324..ee6b31d104 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -12,15 +12,11 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index 1e133a2148..81fa776bba 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -12,14 +12,10 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index 4256f134cc..3b785f2999 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -12,14 +12,10 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index c5c3570350..a0fae041a4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
-
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
@@ -31,7 +29,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index 2c9f109400..7b26bb0613 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
@@ -28,7 +27,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 02454a7203..893fc789f2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
@@ -31,7 +30,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index ce382e3dcf..ef6fc99b12 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
@@ -29,7 +28,6 @@ machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index 420e250f71..8daad94c4c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index 50b3954774..16b0868446 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_print = 70
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 99f977d17c..6ec0425176 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index 210536340f..4928a166b4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
index e2f00681a6..2b12e3380b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -27,7 +27,6 @@ cool_fan_speed_max = =cool_fan_speed
 material_print_temperature = =default_material_print_temperature + 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 88089479ad..7561336d15 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index dd35987ced..92fc11be1f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -29,7 +29,6 @@ material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 5eff4b3248..b732c33d38 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -31,7 +31,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
index a35ff96196..a551417536 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
index 9c688e3995..3c1ec73d54 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
index f6885552ba..ae44c3f019 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
index 09146132d0..6e6a9216cf 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -19,7 +19,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index 72c9981665..1b508e3a23 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -27,7 +27,6 @@ cool_fan_speed_max = =cool_fan_speed
 material_print_temperature = =default_material_print_temperature - 5
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 90a68d134e..b912faa1b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -31,7 +31,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index d59d5c18f7..4069d1a9ad 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -32,7 +32,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index c0445e739c..a91280d99e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -32,7 +32,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
index 516e103d1b..2bc16834c5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 20
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
index 567f8b8c9f..ce0d107138 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 25
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 37 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
index 757f196340..1cceef1af6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 22
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
index 806da07969..a694688d41 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 11b2706b28..38413229e0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 5771c34f8d..b238164e4f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
index 46f1985be1..6421e5ea77 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 15
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
index b72c4565ad..93756a3621 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 20
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
index 43d518be56..2afb9dc78a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 17
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
index d6887f655d..0f436de811 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_min_speed = 10
 
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index c333d0e4b1..b7a36e6c71 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_min_speed = 10
 
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 766a84d843..15d2fc250f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_min_speed = 10
 
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
index 3a16a00041..27c05bc0c6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
index ce043bc020..8182ee03e2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
 
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
index 6343d64dc9..0bbc14ae81 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
index be5ae977b5..5b4142f762 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
index ba58a799e9..2aae9c8933 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
index f121297ab7..85b076551c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index ad56f48c17..1a3f1cd850 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index ee9576aed8..5ecf58efb9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index 4f6c3fa1ed..ffaf2ffcbb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 445d4c6cfd..b9a4a05ec3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 2fba108a33..f4d65fbe04 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 2fbc3d7118..c71889b1fd 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 2e06b86620..a307bc96c6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -23,7 +23,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
index 852256ec7d..f9ea2ed4db 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
index 1df9f6b97b..9ca8ea51ec 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = BB 0.4
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
index 7495130aa9..018298d706 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =3*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
index 308d26bf62..48394a8feb 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
index da87e8211f..85e530fdc1 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -14,7 +14,6 @@ is_experimental = True
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
index 7e2103043f..ab1a289761 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
index 9b1583ed51..0e2f072d03 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
index 28f069a61a..d5ff375abb 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
index 88174ae66d..0ad61736ab 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
index 86de01d997..758a81d3a8 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
index 8b4c50b81e..a0ca08eb8a 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
index bb4d52b0de..d538f95bea 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 6df2857707..2caa3776eb 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 1fddab1122..f9fffb3171 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
index 33d8895bad..465bff3d8d 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -23,7 +22,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
index 1db3242244..40df72973c 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
index 83ac175c47..4cba6c87f4 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
index 9c89527d1e..70b93730d3 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
index c5843560c3..8a617f2d04 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -21,7 +20,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
index f2638e6bd6..9c396012bb 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -21,7 +20,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
index 2df0244992..de38df43ee 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -21,7 +20,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
index cf26243471..5b3c0024ab 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -21,7 +20,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
index df7c944caf..08bbc9125e 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
index 84169d31f7..4cb210bba3 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 0ee0d7cbe9..21619933c7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 9271ecc864..de31626bc4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -12,13 +12,11 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index eb4ced65c1..76637899fc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -12,15 +12,11 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index 7ba60c0fd4..b0c2360339 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -12,14 +12,10 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index e991199658..4c1c0a1871 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -12,14 +12,10 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-material_standby_temperature = 100
 ooze_shield_angle = 40
 raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 26184e715b..11c316f5d6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
@@ -29,7 +28,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index f739e1c5ac..fd8f30f78f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
@@ -28,7 +27,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index aec7cc4293..c3cff67a2c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
-
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
@@ -30,7 +28,6 @@ machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 3346f39efe..868de66c25 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
@@ -28,7 +26,6 @@ machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 ooze_shield_angle = 40
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index bcd193268d..41944ad06e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index 37ca77c51a..66aa89a6a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_print = 70
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 98049f2d1c..1d498d252a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index b9acd3ba63..1eb4fd8735 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 4e5180032c..3b20559564 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -27,7 +27,6 @@ cool_fan_speed_max = =cool_fan_speed
 material_print_temperature = =default_material_print_temperature + 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 4ee2ec2f4e..2bdd3801aa 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature + 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index bd01a9e7e6..d1170be743 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -30,7 +30,6 @@ material_final_print_temperature = =material_print_temperature - 12
 material_initial_print_temperature = =material_print_temperature - 2
 material_print_temperature = =default_material_print_temperature - 13
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 9cc83fa123..76c7468d7e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -31,7 +31,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_print_temperature = =default_material_print_temperature - 15
 material_print_temperature_layer_0 = =material_print_temperature + 3
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
index 5b627b87f7..e1d45bbbc6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
index f1370caaf0..0f731a673d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
index 8f1158bcbc..3bb7ba5d2f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
index 6f46c9c441..dd469f9403 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -19,7 +19,6 @@ layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index 5138c25d0b..bfb76f20c8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -27,7 +27,6 @@ cool_fan_speed_max = =cool_fan_speed
 material_print_temperature = =default_material_print_temperature - 5
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index dd4fe11a2c..7b2cba17cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -32,7 +32,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index 346bb31931..7f08f03b06 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -32,7 +32,6 @@ material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index e8617e309f..c1c389efd2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -31,7 +31,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 106
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_count_max = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
index ef542bed03..83957e6d0f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 20
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
index 88c5aee1a2..011a962d8d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 25
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 37 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
index 5b91e9ecc4..910592f909 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.8
 [values]
 
 material_print_temperature = =default_material_print_temperature + 22
-material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
index 53f58530b9..3c1491befd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
index b5a7bf5de0..30b1940b9c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 4dcbf91e6a..01cdfb6142 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 retraction_hop = 0.1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
index f79c57f967..ed90985548 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 15
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
index 3f9bec36ab..87d8bb69e1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 20
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
index d2ec9bdc00..970964203f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 15
 
 material_print_temperature = =default_material_print_temperature + 17
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
index 5a1a8ee5c1..b7d767a40b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 89a55e3f6f..23b93082f6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
index c1b0737a24..a12ef5caf3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_min_speed = 10
 
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
-material_standby_temperature = 100
 ooze_shield_angle = 40
 prime_tower_enable = True
 raft_acceleration = =acceleration_layer_0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
index bb43019b98..8c762a2286 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
index 72be6682c6..b5b54af8ea 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
 
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
index 0786997c50..87f2af5e8f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -17,7 +17,6 @@ brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 raft_airgap = 0.5
 raft_margin = 15
 skin_overlap = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
index b128d3a252..926a1394bd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index 8aa0a748d4..1d2b4bf257 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
index ad9b43ab07..d9a6c58217 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.8
 brim_width = 7
 
 material_print_temperature = =default_material_print_temperature - 5
-material_standby_temperature = 100
 prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index e6f87c3442..0714319001 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 324b121ca7..9b669346eb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -20,7 +20,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 67cd7d50ac..498a099bfb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -19,7 +19,6 @@ top_skin_expand_distance = =line_width * 2
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
index b8e0103386..48bbe5b568 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 5
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 prime_tower_enable = False
 retract_at_layer_change = False
 speed_infill = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index e132129969..a6574f6eec 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature + 19
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 410d07b902..eda3b32597 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -24,7 +24,6 @@ material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =material_print_temperature + 15
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index c4d48a2f6c..24eb4a0b06 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -23,7 +23,6 @@ material_final_print_temperature = =material_print_temperature
 material_flow = 105
 material_initial_print_temperature = =material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature + 17
-material_standby_temperature = 100
 multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index cdb8384f68..05069e722c 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index b98235718b..7539f5fdb1 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = BB 0.4
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 skin_overlap = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index 40dcd5da35..c320676f02 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =3*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index d5397c44eb..a068c96756 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.4
 [values]
 support_infill_sparse_thickness = =2*layer_height
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
index 6bacefc331..c8c7971f09 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -14,7 +14,6 @@ is_experimental = True
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 prime_tower_enable = False
 retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 0259c3040f..e526fc6426 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index c1768abc54..ae5b0aacfe 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_interface_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index 315ee5748f..b37122ab7e 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -13,7 +13,6 @@ variant = BB 0.8
 
 [values]
 brim_replaces_support = False
-material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
index 44df638c2f..0e738f1e3d 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
index c2e3a080a2..e0d01ba82f 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
index 3b6c3c2984..52d0a07ea5 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
index 1115c306fd..86dad3779b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 72f48e9c57..da79e206cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 169bd1365e..644b964c28 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
index ac59de30b6..2977a497eb 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
index 0c4d2babbd..a339098b6a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -12,18 +12,14 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
index 4b82c58a66..a8bcf6d444 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
index 6c855696de..ecffafed57 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
index 48c31f4cd2..dd2f4231c7 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -12,17 +12,14 @@ material = generic_cffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
index 9ad29b3ab9..eb2cc63b78 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -12,17 +12,14 @@ material = generic_cffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
index d169225a50..e5bc3d2e5b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -12,17 +12,14 @@ material = generic_gffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
index faa5070778..72e1c0f4fe 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
@@ -21,7 +20,6 @@ initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
 skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
index d0cfbad066..68da56447b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
index 14bc1dd211..58e377a417 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
@@ -23,7 +23,6 @@ machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 prime_tower_enable = True
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/themes/cura-dark/images/cura_connected_printers.svg b/resources/themes/cura-dark/images/cura_connected_printers.svg
new file mode 100644
index 0000000000..d7d0dc9d23
--- /dev/null
+++ b/resources/themes/cura-dark/images/cura_connected_printers.svg
@@ -0,0 +1,111 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="Layer_1" data-name="Layer 1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 298 271">
+  <defs>
+    <style>
+      .cls-1, .cls-2, .cls-3, .cls-4, .cls-5, .cls-6, .cls-7, .cls-8, .cls-9, .cls-10 {
+        stroke: #f3f3f3;
+      }
+
+      .cls-1, .cls-2, .cls-3, .cls-4, .cls-5, .cls-6, .cls-8, .cls-11, .cls-9, .cls-10 {
+        stroke-miterlimit: 10;
+      }
+
+      .cls-1, .cls-12, .cls-4, .cls-10 {
+        fill: #555557;
+      }
+
+      .cls-1, .cls-9 {
+        stroke-width: 1.8px;
+      }
+
+      .cls-2 {
+        stroke-dasharray: 0 0 4 4;
+      }
+
+      .cls-2, .cls-3, .cls-4, .cls-5, .cls-6, .cls-7, .cls-8, .cls-11, .cls-10 {
+        stroke-width: 2px;
+      }
+
+      .cls-2, .cls-3, .cls-5, .cls-6, .cls-7, .cls-8, .cls-11, .cls-9 {
+        fill: none;
+      }
+
+      .cls-13 {
+        fill: #f3f3f3;
+      }
+
+      .cls-14 {
+        fill: #1f1f20;
+      }
+
+      .cls-3 {
+        stroke-dasharray: 0 0 4 4;
+      }
+
+      .cls-5 {
+        stroke-dasharray: 0 0 3.9 3.9;
+      }
+
+      .cls-6 {
+        stroke-dasharray: 0 0 3.81 3.81;
+      }
+
+      .cls-7 {
+        stroke-linecap: round;
+        stroke-linejoin: round;
+      }
+
+      .cls-11 {
+        stroke: #061884;
+      }
+
+      .cls-10 {
+        stroke-dasharray: 0 4;
+      }
+    </style>
+  </defs>
+  <g id="a">
+    <line class="cls-11" x1="150" y1="98" x2="150" y2="100"/>
+    <g>
+      <line class="cls-8" x1="150" y1="46" x2="150" y2="48"/>
+      <line class="cls-6" x1="150" y1="51.81" x2="150" y2="88.04"/>
+      <line class="cls-8" x1="150" y1="89.95" x2="150" y2="91.95"/>
+    </g>
+    <g>
+      <line class="cls-8" x1="227" y1="46" x2="227" y2="48"/>
+      <line class="cls-3" x1="227" y1="52" x2="227" y2="66"/>
+      <line class="cls-8" x1="227" y1="68" x2="227" y2="70"/>
+    </g>
+    <g>
+      <line class="cls-8" x1="73" y1="46" x2="73" y2="48"/>
+      <line class="cls-2" x1="73" y1="52" x2="73" y2="66.01"/>
+      <line class="cls-8" x1="73" y1="68.02" x2="73" y2="70.02"/>
+    </g>
+    <line class="cls-10" x1="74" y1="69" x2="72" y2="69"/>
+    <g>
+      <line class="cls-8" x1="228.01" y1="69" x2="226.01" y2="69"/>
+      <line class="cls-5" x1="222.11" y1="69" x2="75.95" y2="69"/>
+      <line class="cls-8" x1="74" y1="69" x2="72" y2="69"/>
+    </g>
+    <path class="cls-13" d="M91,0V36h-6.33l-4-3h-15.33l-4,3h-6.33V0h36Zm-2,2H57V34h3.67l4-3h16.67l4,3h3.67V2Zm-4,23c0,1.66-1.34,3-3,3h-18c-1.66,0-3-1.34-3-3V5h24V25Zm-15-18v3h6v-3h-6Zm13,0h-5v5h-10V7h-5V26h20V7Z"/>
+    <path class="cls-13" d="M168,0V36h-6.33l-4-3h-15.33l-4,3h-6.33V0h36Zm-2,2h-32V34h3.67l4-3h16.67l4,3h3.67V2Zm-4,23c0,1.66-1.34,3-3,3h-18c-1.66,0-3-1.34-3-3V5h24V25Zm-15-18v3h6v-3h-6Zm13,0h-5v5h-10V7h-5V26h20V7Z"/>
+    <path class="cls-13" d="M245,0V36h-6.33l-4-3h-15.33l-4,3h-6.33V0h36Zm-2,2h-32V34h3.67l4-3h16.67l4,3h3.67V2Zm-4,23c0,1.66-1.34,3-3,3h-18c-1.66,0-3-1.34-3-3V5h24V25Zm-15-18v3h6v-3h-6Zm13,0h-5v5h-10V7h-5V26h20V7Z"/>
+    <path class="cls-4" d="M28,97.1V254h242V97.1h0c0-3.37-2.73-6.1-6.1-6.1H34.1c-3.37,0-6.1,2.73-6.1,6.1Z"/>
+    <path class="cls-14" d="M261,255c.55,0,1-.45,1-1V102c0-1.66-1.34-3-3-3H38c-1.1,0-2,.9-2,2V254c0,.55,.45,1,1,1h224Z"/>
+    <path class="cls-13" d="M259,100H38c-.55,0-1,.45-1,1V254h224V102c0-1.1-.9-2-2-2m4,2V254c0,1.1-.9,2-2,2H37c-1.1,0-2-.9-2-2V101c0-1.66,1.34-3,3-3h221c2.21,0,4,1.79,4,4Z"/>
+    <path class="cls-12" d="M259,102H39V252h220V102m2,0V254H37V101c0-.55,.45-1,1-1h221c1.1,0,2,.9,2,2Z"/>
+    <line class="cls-7" x1="297" y1="270" x2="1" y2="270"/>
+    <path class="cls-12" d="M276.89,270c8.28,0,14.99-6.72,15-15,0-.55-.45-1-1-1H7.11c-.55,0-1,.45-1,1,0,8.28,6.72,14.99,15,15h255.77Z"/>
+    <path class="cls-13" d="M290.89,255H7.11c0,7.73,6.27,14,14,14h255.77c7.73,0,14-6.27,14-14m2,0c-.01,8.83-7.17,15.99-16,16H21.11c-8.83-.01-15.99-7.17-16-16,0-1.1,.9-2,2-2H290.89c1.1,0,2,.9,2,2Zm-2,2h0Z"/>
+    <path class="cls-13" d="M172,254.61c0,2.43-1.97,4.39-4.39,4.39h-36.21c-2.43,0-4.39-1.97-4.39-4.39v-.61h45v.61Z"/>
+    <polygon class="cls-8" points="191.31 191.39 191.31 131.89 131.81 131.89 106.31 157.39 106.31 216.89 165.81 216.89 191.31 191.39"/>
+    <path class="cls-8" d="M161.56,195.64h-12.75c-11.74,0-21.25-9.51-21.25-21.25s9.51-21.25,21.25-21.25h12.75"/>
+    <path class="cls-14" d="M209.37,134.96c0-9.8-7.91-17.77-17.71-17.84-9.85-.07-17.9,7.85-17.97,17.71-.07,9.85,7.85,17.9,17.71,17.97,9.89,.03,17.93-7.96,17.97-17.84Z"/>
+    <path class="cls-14" d="M191.39,118.62c-9.06-.04-16.44,7.28-16.47,16.34,0,8.97,7.24,16.27,16.21,16.34,9.02,.07,16.4-7.18,16.47-16.21,.07-9.02-7.18-16.4-16.21-16.47m19.47,16.34c0,10.63-8.58,19.27-19.21,19.34-10.68,.07-19.4-8.53-19.47-19.21-.07-10.68,8.53-19.4,19.21-19.47,10.71-.02,19.42,8.63,19.47,19.34Z"/>
+    <ellipse class="cls-9" cx="191.39" cy="134.96" rx="16.47" ry="16.34"/>
+    <path class="cls-9" d="M191.39,118.62c-2.84,2.76-4.62,6.68-5.55,11.18-.69,3.41-.69,6.91,0,10.32,.93,4.5,2.71,8.42,5.55,11.18"/>
+    <path class="cls-9" d="M191.39,151.3c2.84-3.16,4.76-7.02,5.58-11.18,.65-3.41,.65-6.91,0-10.32-.82-4.16-2.75-8.02-5.58-11.18"/>
+    <line class="cls-1" x1="207" y1="140.12" x2="175.79" y2="140.12"/>
+    <line class="cls-1" x1="207" y1="129.8" x2="175.79" y2="129.8"/>
+  </g>
+</svg>
\ No newline at end of file
diff --git a/resources/themes/cura-light/images/cura_connected_printers.svg b/resources/themes/cura-light/images/cura_connected_printers.svg
new file mode 100644
index 0000000000..d18302bdf1
--- /dev/null
+++ b/resources/themes/cura-light/images/cura_connected_printers.svg
@@ -0,0 +1 @@
+<svg id="Laag_1" data-name="Laag 1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 300 300"><defs><style>.cls-1,.cls-4{fill:#f3f8fe;}.cls-1,.cls-6,.cls-7{stroke:#061884;}.cls-1,.cls-10,.cls-5{stroke-miterlimit:10;}.cls-1,.cls-10,.cls-5,.cls-6,.cls-7{stroke-width:2px;}.cls-2,.cls-6{fill:#fff;}.cls-3{fill:#061884;}.cls-10,.cls-5,.cls-7{fill:none;}.cls-5{stroke:#c5dbfb;}.cls-10,.cls-5,.cls-6,.cls-7{stroke-linecap:round;}.cls-10,.cls-5{stroke-dasharray:4 6;}.cls-6,.cls-7{stroke-linejoin:round;}.cls-8{fill:#c5dbfb;}.cls-9{fill:#061784;}.cls-10{stroke:#061784;}</style></defs><path class="cls-1" d="M34,95.76H264.17a6.1,6.1,0,0,1,6.1,6.1V259a0,0,0,0,1,0,0H27.94a0,0,0,0,1,0,0V101.86A6.1,6.1,0,0,1,34,95.76Z"/><path class="cls-2" d="M39,258.9a1,1,0,0,1-1-1V105a2,2,0,0,1,2-2H260.69a3,3,0,0,1,3,3V257.9a1,1,0,0,1-1,1Z"/><path class="cls-3" d="M260.69,104a2,2,0,0,1,2,2V257.9H39V105a1,1,0,0,1,1-1H260.69m0-2H40a3,3,0,0,0-3,3V257.9a2,2,0,0,0,2,2H262.69a2,2,0,0,0,2-2V106a4,4,0,0,0-4-4Z"/><path class="cls-4" d="M260.69,106V255.9H41V106H260.69m0-2H40a1,1,0,0,0-1,1V257.9H262.69V106a2,2,0,0,0-2-2Z"/><path class="cls-5" d="M181.94,105.9"/><line class="cls-6" x1="1" y1="274.41" x2="297.21" y2="274.41"/><path class="cls-4" d="M21.7,274.41A15.5,15.5,0,0,1,6.22,258.92a1,1,0,0,1,1-1H291a1,1,0,0,1,1,1,15.51,15.51,0,0,1-15.49,15.49Z"/><path class="cls-3" d="M291,258.92a14.49,14.49,0,0,1-14.49,14.49H21.7A14.48,14.48,0,0,1,7.22,258.92H291m0-2H7.22a2,2,0,0,0-2,2A16.5,16.5,0,0,0,21.7,275.41H276.5A16.51,16.51,0,0,0,293,258.92a2,2,0,0,0-2-2Zm0,4Z"/><path class="cls-3" d="M171.6,258.92h-45v.61a4.4,4.4,0,0,0,4.4,4.39h36.21a4.39,4.39,0,0,0,4.39-4.39Z"/><polygon class="cls-1" points="165.96 230.99 106.46 230.99 106.46 171.49 131.96 145.99 191.46 145.99 191.46 205.49 165.96 230.99"/><path class="cls-7" d="M161.71,167.24H149a21.25,21.25,0,0,0,0,42.5h12.75"/><circle class="cls-2" cx="193.96" cy="147.99" r="25"/><path class="cls-3" d="M194,128a20,20,0,1,0,20,20A20,20,0,0,0,194,128Zm16.58,13h-9.38a29.54,29.54,0,0,0-4.94-10.84A18,18,0,0,1,210.54,141ZM200,148a29.07,29.07,0,0,1-.44,5H188.4a28.63,28.63,0,0,1,0-10h11.12A29.07,29.07,0,0,1,200,148Zm-11.13,7h10.26A27.78,27.78,0,0,1,194,165.47,27.78,27.78,0,0,1,188.83,155Zm0-14A27.7,27.7,0,0,1,194,130.51,27.7,27.7,0,0,1,199.09,141Zm2.87-10.84A29.54,29.54,0,0,0,186.76,141h-9.38A18,18,0,0,1,191.7,130.15Zm-15,12.84h9.69a30.69,30.69,0,0,0,0,10h-9.69a17.72,17.72,0,0,1,0-10Zm.7,12h9.38a29.54,29.54,0,0,0,4.94,10.84A18,18,0,0,1,177.38,155Zm18.84,10.84A29.54,29.54,0,0,0,201.16,155h9.38A18,18,0,0,1,196.22,165.83Zm15-12.84h-9.69a30.69,30.69,0,0,0,0-10h9.69a17.72,17.72,0,0,1,0,10Z"/><path class="cls-8" d="M150.16,140a1,1,0,0,1-1-1v-4a1,1,0,0,1,2,0v4A1,1,0,0,1,150.16,140Zm0-10a1,1,0,0,1-1-1v-4a1,1,0,1,1,2,0v4A1,1,0,0,1,150.16,130Zm0-10a1,1,0,0,1-1-1v-4a1,1,0,1,1,2,0v4A1,1,0,0,1,150.16,120Z"/><path class="cls-9" d="M150.16,90a1,1,0,0,1-1-1V85a1,1,0,1,1,2,0v4A1,1,0,0,1,150.16,90Zm0-10a1,1,0,0,1-1-1V75a1,1,0,1,1,2,0v4A1,1,0,0,1,150.16,80Zm0-10a1,1,0,0,1-1-1V65a1,1,0,0,1,2,0v4A1,1,0,0,1,150.16,70Zm0-10a1,1,0,0,1-1-1V55a1,1,0,0,1,2,0v4A1,1,0,0,1,150.16,60Zm0-10a1,1,0,0,1-1-1V45a1,1,0,0,1,2,0v4A1,1,0,0,1,150.16,50Zm0-10a1,1,0,0,1-1-1,1,1,0,0,1,1-1h0a1,1,0,0,1,0,2Z"/><path class="cls-9" d="M215.16,60a1,1,0,0,1-1-1V55a1,1,0,1,1,2,0v4A1,1,0,0,1,215.16,60Zm-6,0h-4a1,1,0,1,1,0-2h4a1,1,0,0,1,0,2Zm-10,0h-4a1,1,0,0,1,0-2h4a1,1,0,0,1,0,2Zm-10,0h-4a1,1,0,0,1,0-2h4a1,1,0,0,1,0,2Zm-10,0h-4a1,1,0,0,1,0-2h4a1,1,0,0,1,0,2Zm-10,0h-4a1,1,0,0,1,0-2h4a1,1,0,0,1,0,2Zm-10,0h-4a1,1,0,0,1,0-2h4a1,1,0,0,1,0,2Zm56-10a1,1,0,0,1-1-1V45a1,1,0,1,1,2,0v4A1,1,0,0,1,215.16,50Z"/><polyline class="cls-10" points="145.16 58.99 85.16 58.99 85.16 38.99"/><path class="cls-3" d="M67.89,0V36h6.34l4-3H93.56l4,3h6.33V0Zm34,34H98.23l-4-3H77.56l-4,3H69.89V2h32Z"/><path class="cls-3" d="M97.89,5h-24V25a3,3,0,0,0,3,3h18a3,3,0,0,0,3-3Zm-9,2v3h-6V7Zm7,19h-20V7h5v5h10V7h5Z"/><path class="cls-3" d="M132.82,0V36h6.34l4-3h15.33l4,3h6.33V0Zm34,34h-3.66l-4-3H142.49l-4,3h-3.67V2h32Z"/><path class="cls-3" d="M162.82,5h-24V25a3,3,0,0,0,3,3h18a3,3,0,0,0,3-3Zm-9,2v3h-6V7Zm7,19h-20V7h5v5h10V7h5Z"/><path class="cls-3" d="M197.75,0V36h6.34l4-3h15.33l4,3h6.33V0Zm34,34h-3.66l-4-3H207.42l-4,3h-3.67V2h32Z"/><path class="cls-3" d="M227.75,5h-24V25a3,3,0,0,0,3,3h18a3,3,0,0,0,3-3Zm-9,2v3h-6V7Zm7,19h-20V7h5v5h10V7h5Z"/></svg>
\ No newline at end of file
diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg
index a5ae2a383e..e46f7f8258 100644
--- a/resources/variants/ultimaker3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.8.inst.cfg
@@ -27,7 +27,6 @@ machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index d0cc437b1b..fb09362b67 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -28,7 +28,6 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
index de525e3caf..4110cf8679 100644
--- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
@@ -27,7 +27,6 @@ machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index 205ae4b0f2..b1317d77f5 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -28,7 +28,6 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index bc1f092e63..c3ff805ba0 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -27,7 +27,6 @@ machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 60dfcafd33..123386d1b3 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -27,7 +27,6 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index 9b1dfa0dc8..f2e3421b67 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -28,7 +28,6 @@ machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 4e9d687d8a..acab25be4e 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -27,7 +27,6 @@ machine_nozzle_id = BB 0.8
 machine_nozzle_size = 0.8
 machine_nozzle_tip_outer_diameter = 2.0
 material_print_temperature = =default_material_print_temperature + 10
-material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True