Modify the Ender 6 profile to the minimun

Modify the Ender 6 profile to the minimun, to fit other creality printers. all additional configuration removed. 
Print quality is better with default Creality firmware and this simpler definition.

1 files changed, 14 insertions, 25 deletions

diff --git a/resources/definitions/creality_ender6.def.json b/resources/definitions/creality_ender6.def.json
index c5d46b1a36..72dd042abd 100644
--- a/resources/definitions/creality_ender6.def.json
+++ b/resources/definitions/creality_ender6.def.json
@@ -1,23 +1,17 @@
 {

-    "name": "Creality Ender-6",

+    "name": "Creality Ender-3 Pro",

     "version": 2,

     "inherits": "creality_base",

+    "metadata": {

+        "quality_definition": "creality_base",

+        "visible": true,

+        "platform": "creality_ender3.3mf"

+    },

     "overrides": {

-        "machine_name": { "default_value": "Creality Ender-6" },

-        "machine_start_gcode": { "default_value": "\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},

-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },

-        "machine_width": { "default_value": 260 },

-        "machine_depth": { "default_value": 260 },

-        "machine_height": { "default_value": 400 },

-        "z_seam_type": { "value": "'sharpest_corner'"},

-        "z_seam_corner": { "value": "'z_seam_corner_inner'"},

-        "infill_sparse_density": { "value": "10"},

-        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'"},

-        "infill_overlap":{"value": 10},    

-        "retraction_amount":{"value": 10},  

-        "speed_travel": { "value": 80.0 },

-        "coasting_enable": { "value": true},

-        "coasting_min_volume": { "value": 0.5},

+        "machine_name": { "default_value": "Creality Ender-3 Pro" },

+        "machine_width": { "default_value": 220 },

+        "machine_depth": { "default_value": 220 },

+        "machine_height": { "default_value": 250 },

         "machine_head_with_fans_polygon": { "default_value": [

                 [-26, 34],

                 [-26, -32],

@@ -25,15 +19,10 @@
                 [32, 34]

             ]

         },

+        "machine_start_gcode": {

+            "default_value": "; Ender 3 Custom Start G-code\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM104 S{material_standby_temperature} ; Start heating up the nozzle most of the way\nM190 S{material_bed_temperature_layer_0} ; Start heating the bed, wait until target temperature reached\nM109 S{material_print_temperature_layer_0} ; Finish heating the nozzle\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"

+        },

 

-        "gantry_height": { "value": 25 },

-

-        "speed_print": { "value": 50.0 },

-        "speed_wall": { "value": 30.0 }

-

-    },

-    "metadata": {

-        "quality_definition": "creality_base",

-        "visible": true

+        "gantry_height": { "value": 25 }

     }

 }