diff options
author | Jaime van Kessel <nallath@gmail.com> | 2022-09-07 17:12:28 +0300 |
---|---|---|
committer | Jaime van Kessel <nallath@gmail.com> | 2022-09-07 17:12:28 +0300 |
commit | a51b3add8075c66c1ddd706c4b79f3f0d88fa081 (patch) | |
tree | 645c88edbb9521901329fb4db0c8d7425e7eae62 /resources | |
parent | 777993a5211caae480b097d109db4be9f21d3353 (diff) | |
parent | bd526dfe336a96a44e450ba271bb4cb6a322e10e (diff) |
Merge branch 'PP-202_autogenerate_intent_profiles' of github.com:Ultimaker/Cura
Diffstat (limited to 'resources')
42 files changed, 70 insertions, 280 deletions
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg index f2095ba055..1a82100882 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -12,16 +12,12 @@ material = generic_abs variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 - - - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index ed17a36b8a..468528e62c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -12,22 +12,13 @@ material = generic_abs variant = AA 0.4 [values] - jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 4ec7a841a5..48dee963d1 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -12,22 +12,13 @@ material = generic_abs variant = AA 0.4 [values] - jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index b74cd522ac..5ece30afd9 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_cpe_plus variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index 1caacdf72f..4afeb44758 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_cpe_plus variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index de109c9810..85a2b0f773 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -12,23 +12,13 @@ material = generic_cpe variant = AA 0.4 [values] - jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index 315b26a3b1..88843e549e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_cpe variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index d4a999d8eb..e0d70d45f2 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_nylon variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index aa371be6f3..e60b654426 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_nylon variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg index abd125f483..944362e745 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_pc variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index c8cf2a3bd4..006b3cac4c 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_pc variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index b4bbdddff7..2686ff7e34 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_petg variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 19418812af..d0f84a8755 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_petg variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 3186c6be4e..8ca43ef884 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -12,21 +12,12 @@ material = generic_pla variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index 36ea7c975e..565387bed6 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -12,16 +12,13 @@ material = generic_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 88691ef1d6..d84c7c3a1a 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -12,16 +12,13 @@ material = generic_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index b59ed875b4..3b6a5b6486 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -11,22 +11,17 @@ quality_type = verydraft material = generic_pla variant = AA 0.4 is_experimental = True - [values] -infill_sparse_density = 10 - -jerk_print = 30 - acceleration_print = 4000 acceleration_wall = 2000 acceleration_wall_0 = 2000 - -speed_print = 50 +infill_sparse_density = 10 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 +speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 - -top_bottom_thickness = 0.8
\ No newline at end of file +top_bottom_thickness = 0.8 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 1ca1775990..b2557b3f5e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -12,21 +12,12 @@ material = generic_tough_pla variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - - diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 924edf577d..3b43a028b4 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -12,16 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index b92e07a877..c8a0053010 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -12,16 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index 21cd1059f0..48fe33a990 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -11,28 +11,17 @@ quality_type = verydraft material = generic_tough_pla variant = AA 0.4 is_experimental = True - [values] -infill_sparse_density = 10 - -jerk_print = 30 -jerk_infill = =jerk_print -jerk_topbottom = =jerk_print -jerk_wall = =jerk_print -jerk_wall_0 = =jerk_wall -jerk_wall_x = =jerk_wall -jerk_layer_0 = 5 - acceleration_print = 4000 acceleration_wall = 2000 acceleration_wall_0 = 2000 - -speed_print = 50 +infill_sparse_density = 10 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 +speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 - -top_bottom_thickness = 0.8
\ No newline at end of file +top_bottom_thickness = 0.8 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg index 98ad3af40b..994699e382 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print_Quick.inst.cfg @@ -12,16 +12,12 @@ material = generic_abs variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 - - - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg index 8939d670b1..592ca35859 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_abs variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg index 44f76d561f..6143b0d78d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_abs variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg index 7bf1fc834a..6d729bcea9 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_cpe_plus variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg index a95862c35a..86e7cc0505 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_cpe_plus variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg index bfdd35017c..12902a388c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_cpe variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg index 022fb2b50d..642a8e2b3c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_cpe variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg index 3637040c4c..1725da9733 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_nylon variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg index 6cce98ca60..0bba4ccb0f 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_nylon variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg index 32e0463447..f3a372c8b2 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_pc variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg index 0b7ffb4154..cca4d4af10 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_pc variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg index 186281c17c..6b06cb6164 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_petg variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg index 545a8b5654..345dc02a8c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality_Accurate.inst.cfg @@ -12,18 +12,13 @@ material = generic_petg variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg index 76d9191fc1..2baf1418a4 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print_Quick.inst.cfg @@ -12,16 +12,12 @@ material = generic_pla variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 - - - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg index ca098b5bfa..aa880fba07 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg index 472c0b4359..65b3df86d6 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg index 51cfaebe34..97d631d300 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print_Quick.inst.cfg @@ -11,22 +11,17 @@ quality_type = verydraft material = generic_pla variant = AA 0.4 is_experimental = True - [values] -infill_sparse_density = 10 - -jerk_print = 30 - acceleration_print = 4000 acceleration_wall = 2000 acceleration_wall_0 = 2000 - -speed_print = 50 +infill_sparse_density = 10 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 +speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 - -top_bottom_thickness = 0.8
\ No newline at end of file +top_bottom_thickness = 0.8 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg index 7851ecd793..5c603860e5 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print_Quick.inst.cfg @@ -12,16 +12,12 @@ material = generic_tough_pla variant = AA 0.4 [values] +infill_sparse_density = 15 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 top_bottom_thickness = 0.8 -infill_sparse_density = 15 - -jerk_print = 30 - - - diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg index 2b1b769595..69f421288c 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg index daa327a2f5..079403efb2 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality_Accurate.inst.cfg @@ -12,17 +12,13 @@ material = generic_tough_pla variant = AA 0.4 [values] - jerk_print = 30 - -speed_print = 30 speed_infill = =speed_print speed_layer_0 = 20 +speed_print = 30 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall top_bottom_thickness = =wall_thickness - wall_thickness = =line_width * 3 -xy_offset_layer_0 = =((-0.2 + layer_height * 0.2) if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg index ec93cc5599..0b2666bf23 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print_Quick.inst.cfg @@ -11,22 +11,17 @@ quality_type = verydraft material = generic_tough_pla variant = AA 0.4 is_experimental = True - [values] -infill_sparse_density = 10 - -jerk_print = 30 - acceleration_print = 4000 acceleration_wall = 2000 acceleration_wall_0 = 2000 - -speed_print = 50 +infill_sparse_density = 10 +jerk_print = 30 speed_infill = =speed_print +speed_layer_0 = 20 +speed_print = 50 speed_topbottom = =speed_print speed_wall = =speed_print speed_wall_0 = =speed_wall speed_wall_x = =speed_wall -speed_layer_0 = 20 - -top_bottom_thickness = 0.8
\ No newline at end of file +top_bottom_thickness = 0.8 |