diff options
author | Jaime van Kessel <nallath@gmail.com> | 2022-09-01 16:01:49 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2022-09-01 16:01:49 +0300 |
commit | ccdbc3e06fa3b21e46168116e45e35f7ac063e50 (patch) | |
tree | 54b46ed3853d8d9e0b808da5486711155104ba00 /resources | |
parent | 053437a50211ed82b91c8a8e5b988ddda5af200d (diff) | |
parent | b3fb34d84a1d8ffdc28c8e142efb07412306b83a (diff) |
Merge pull request #13177 from Ultimaker/PP-235-clean-up-adhesion_type
PP-235-clean-up-adhesion_type
Diffstat (limited to 'resources')
42 files changed, 0 insertions, 80 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 886807a836..49ecf8eb7c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 is_experimental = True [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index ea80f381a1..5d04d3730c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - - material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index d9ba64ae04..ee6b31d104 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - - material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 8a6d73d6ca..81fa776bba 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 - - material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 8688939b35..3b785f2999 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 - - material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index d02bf873f4..a0fae041a4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -12,13 +12,11 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 - infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index f15ca790ed..7b26bb0613 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 330ccb1d66..893fc789f2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -12,7 +12,6 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index e931b99e4d..ef6fc99b12 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,7 +12,6 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg index ee5eb84f18..0ad61736ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffcpe variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg index 27aa351fcb..758a81d3a8 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffcpe variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg index 308f7d4659..a0ca08eb8a 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffpa variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg index efd383a565..d538f95bea 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffpa variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg index 31dffcd0fa..2caa3776eb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffcpe variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg index 5086b257e2..f9fffb3171 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffcpe variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg index 4fecd89e67..465bff3d8d 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffpa variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg index 0355b4906d..40df72973c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_gffpa variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg index 4dbf39a83e..8a617f2d04 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffcpe variant = CC 0.6 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg index fdaa98e8e3..9c396012bb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_cffpa variant = CC 0.6 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg index 06e1b1e186..de38df43ee 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffcpe variant = CC 0.6 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg index 3e570585d5..5b3c0024ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffpa variant = CC 0.6 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 0ee0d7cbe9..21619933c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,7 +13,6 @@ variant = AA 0.25 is_experimental = True [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index ab5ee10570..de31626bc4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 material_print_temperature = =default_material_print_temperature + 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index e0d5fd698f..76637899fc 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 - - material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 11369becf7..b0c2360339 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 - - material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index c5076d7b11..4c1c0a1871 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_nylon variant = AA 0.4 [values] -adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 - - material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index ad46d3ba5c..11c316f5d6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 0bd02289de..fd8f30f78f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index f5bf35a232..c3cff67a2c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -12,13 +12,11 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 - infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index a4c0c3d365..868de66c25 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,13 +12,11 @@ material = generic_pc variant = AA 0.4 [values] -adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 - infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index cb1a50803c..0e738f1e3d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_cffcpe variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index ce03a5ae09..e0d01ba82f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_cffcpe variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 3036247066..52d0a07ea5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_cffpa variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index a399338789..86dad3779b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_cffpa variant = CC 0.4 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index dfcf839d41..da79e206cf 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_gffcpe variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index 2b7a43ccfc..644b964c28 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_gffcpe variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index 918680ec18..2977a497eb 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_gffpa variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index 67fb7b24c1..a339098b6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -12,14 +12,11 @@ material = generic_gffpa variant = CC 0.4 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 - material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index d91ade8af3..dd2f4231c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_cffcpe variant = CC 0.6 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index 087a3868bf..eb2cc63b78 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_cffpa variant = CC 0.6 [values] -adhesion_type = skirt cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index 431a570dc0..e5bc3d2e5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -12,12 +12,10 @@ material = generic_gffcpe variant = CC 0.6 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 - initial_layer_line_width_factor = 130.0 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 29e0335e9e..72e1c0f4fe 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -12,7 +12,6 @@ material = generic_gffpa variant = CC 0.6 [values] -adhesion_type = brim cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 |