diff options
| author | Ghostkeeper <rubend@tutanota.com> | 2016-10-20 15:01:20 +0300 |
|---|---|---|
| committer | Ghostkeeper <rubend@tutanota.com> | 2016-10-20 15:01:30 +0300 |
| commit | de45d25f0bd8c1711df6021581c2f2acd8a63438 (patch) | |
| tree | 5742e9f39a01bae3490d708ee3832cde85cbbefd /resources | |
| parent | d228f6ce9f7f63191d064f5e72eec6540aa71472 (diff) | |
Update material profiles for ABS
This is a weekly update from Tom.
Diffstat (limited to 'resources')
4 files changed, 63 insertions, 63 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 13202adff1..4fcedc258a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_speed = 5
@@ -95,20 +95,20 @@ travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1
-support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 +support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
retraction_amount = 6.5
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 36ebf401ee..ef4122439d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_speed = 7
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
-support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') +support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
retraction_amount = 6.5
cool_min_layer_time_fan_speed_max = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index b9d0c343c2..8e4b7ea767 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_speed = 12
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
-support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') +support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
retraction_amount = 6.5
cool_min_layer_time_fan_speed_max = 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index cdefcf71d6..7e17443c2b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -25,7 +25,7 @@ acceleration_wall_x = =acceleration_wall adhesion_type = brim
brim_width = 7
cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 50
+cool_fan_speed = 5
cool_fan_speed_max = 100
cool_min_layer_time = 5
cool_min_speed = 5
@@ -95,21 +95,21 @@ travel_compensate_overlapping_walls_enabled = True wall_0_inset = 0
wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
wall_thickness = 1.3
-support_line_width = =line_width -support_pattern = zigzag -support_infill_rate = 15 -support_join_distance = 2 -support_offset = 0.2 -support_interface_enable = False -support_use_towers = True -raft_margin = 15 -raft_airgap = 0.3 -raft_surface_layers = 2 -raft_surface_thickness = =resolveOrValue('layer_height') -raft_interface_thickness = =resolveOrValue('layer_height') * 1.5 -raft_interface_line_width = =line_width * 2 -raft_interface_line_spacing = =raft_interface_line_width + 0.2 -support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height') +support_line_width = =line_width
+support_pattern = zigzag
+support_infill_rate = 15
+support_join_distance = 2
+support_offset = 0.2
+support_interface_enable = False
+support_use_towers = True
+raft_margin = 15
+raft_airgap = 0.3
+raft_surface_layers = 2
+raft_surface_thickness = =resolveOrValue('layer_height')
+raft_interface_thickness = =resolveOrValue('layer_height') * 1.5
+raft_interface_line_width = =line_width * 2
+raft_interface_line_spacing = =raft_interface_line_width + 0.2
+support_bottom_height = =extruderValue(support_interface_extruder_nr, 'support_interface_height')
retraction_amount = 6.5
cool_min_layer_time_fan_speed_max = 10
|