Add acceleration_infill & acceleration_wall

Add acceleration_infill & acceleration_wall
and modify speed_travel

51 files changed, 213 insertions, 86 deletions

diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg
index e55703d51b..fac98260b8 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg
@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg
index 11cc5989cd..b1047a0577 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg
@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg
index 79c520853b..5846b1145c 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg
@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg
index 718e9a18b5..5027575edc 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg
@@ -23,11 +23,13 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
 support_infill_rate = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg
index b9ab528973..c68c4a0e92 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg
index 9ff2b8d07c..324c68207b 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg
index eaf1970cd6..7e390cb12b 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg
index ddd907d233..fe0efc5e8a 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg
index 1fa0e0a933..aaeab62950 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg
index a336d046dd..45c97e344c 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg
index f17479e1d0..d6f51c85d4 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg
index 488ffcf798..c577bd6678 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 6.5
 retraction_speed = 20
 retraction_prime_speed = 15
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg
index 6df03ef0c1..503910c500 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg
index a42adc1a68..fea8145873 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg
index 5b136fd50f..2d28e6b062 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg
index 13f1509e31..516150a974 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg
index c78ab1948f..9b83cee870 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg
@@ -30,4 +30,6 @@ retraction_amount = 6.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg
index 5feeea0845..799358bf34 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg
@@ -30,4 +30,6 @@ retraction_amount = 6.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg
index 8c77e43851..fdcf2f80e1 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg
@@ -30,4 +30,6 @@ retraction_amount = 6.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg
index 35acdba388..b7bd42adca 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg
@@ -30,4 +30,6 @@ retraction_amount = 6.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg
index d94c2f748a..20503c70ac 100644
--- a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg
@@ -12,7 +12,8 @@ material = xyzprinting_pahtcf15
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
-material_bed_temperature = 90
+line_width = 0.4
+wall_line_width_x = 0.4
 layer_height = 0.4
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -20,13 +21,19 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
-speed_print = 40
+speed_print = 20
 speed_infill = 40
 speed_wall = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 6
+speed_layer_0 = 15
+retraction_amount = 7
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+infill_material_flow = 85
+wall_material_flow = 85
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg
index d756c80f73..11eaf72a17 100644
--- a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg
@@ -12,7 +12,8 @@ material = xyzprinting_pahtcf15
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
-material_bed_temperature = 90
+line_width = 0.4
+wall_line_width_x = 0.4
 layer_height = 0.3
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -20,13 +21,19 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
-speed_print = 40
+speed_print = 20
 speed_infill = 40
 speed_wall = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 6
+speed_layer_0 = 15
+retraction_amount = 7
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+infill_material_flow = 85
+wall_material_flow = 85
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg
index ccdcd9d8f3..f43dafa4c1 100644
--- a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg
@@ -12,7 +12,8 @@ material = xyzprinting_pahtcf15
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
-material_bed_temperature = 90
+line_width = 0.4
+wall_line_width_x = 0.4
 layer_height = 0.1
 layer_height_0 = 0.2
 material_diameter = 1.75
@@ -20,13 +21,19 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
-speed_print = 40
+speed_print = 20
 speed_infill = 40
 speed_wall = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 6
+speed_layer_0 = 15
+retraction_amount = 7
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+infill_material_flow = 85
+wall_material_flow = 85
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg
index 892315e7b2..88531025db 100644
--- a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg
@@ -12,7 +12,8 @@ material = xyzprinting_pahtcf15
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
-material_bed_temperature = 90
+line_width = 0.4
+wall_line_width_x = 0.4
 layer_height = 0.2
 layer_height_0 = 0.3
 material_diameter = 1.75
@@ -20,13 +21,19 @@ material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
-speed_print = 40
+speed_print = 20
 speed_infill = 40
 speed_wall = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 6
+speed_layer_0 = 15
+retraction_amount = 7
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+infill_material_flow = 85
+wall_material_flow = 85
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg
index f1f875d796..7417b7f268 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg
@@ -28,4 +28,5 @@ retraction_amount = 3.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg
index 7144bee2ac..6a2d3ac048 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg
@@ -28,4 +28,5 @@ retraction_amount = 3.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg
index 715225fcb7..760e522bf6 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg
@@ -28,4 +28,5 @@ retraction_amount = 3.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg
index 4b244b0f66..409e6e9277 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg
@@ -28,4 +28,5 @@ retraction_amount = 3.0
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg
index d78cec3433..4bda3e06f5 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg
@@ -12,6 +12,9 @@ material = xyzprinting_pc
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
+infill_line_width = 0.6
+line_width = 0.6
+wall_line_width_x = 0.6
 layer_height = 0.4
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -24,8 +27,13 @@ speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 3.0
+speed_layer_0 = 15
+retraction_amount = 5.5
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+adhesion_type = brim
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg
index a766ec5995..6cad309d6e 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg
@@ -12,6 +12,9 @@ material = xyzprinting_pc
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
+infill_line_width = 0.6
+line_width = 0.6
+wall_line_width_x = 0.6
 layer_height = 0.3
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -24,8 +27,13 @@ speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 3.0
+speed_layer_0 = 15
+retraction_amount = 5.5
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+adhesion_type = brim
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg
index 321bee9acf..a2df2ca7cc 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg
@@ -12,6 +12,9 @@ material = xyzprinting_pc
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
+infill_line_width = 0.6
+line_width = 0.6
+wall_line_width_x = 0.6
 layer_height = 0.1
 layer_height_0 = 0.2
 material_diameter = 1.75
@@ -24,8 +27,13 @@ speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 3.0
+speed_layer_0 = 15
+retraction_amount = 5.5
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+adhesion_type = brim
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg
index e12cdbe8ae..49da58822c 100644
--- a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg
@@ -12,6 +12,9 @@ material = xyzprinting_pc
 variant = Hardened Steel High Temp. 0.6mm Nozzle
 
 [values]
+infill_line_width = 0.6
+line_width = 0.6
+wall_line_width_x = 0.6
 layer_height = 0.2
 layer_height_0 = 0.30
 material_diameter = 1.75
@@ -24,8 +27,13 @@ speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
 speed_travel = 150
-retraction_amount = 3.0
+speed_layer_0 = 15
+retraction_amount = 5.5
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 500.0
+acceleration_wall = 500.0
+acceleration_wall_0 = 500.0
+adhesion_type = brim
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg
index 386e7f6f37..3def2cabb0 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg
index 500da52491..cbf7927751 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg
index cdd394463b..52b389e04a 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg
index 590715cbfd..37c4da6dff 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg
@@ -24,10 +24,12 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 3
 retraction_speed = 20
 retraction_prime_speed = =retraction_speed
 infill_sparse_density = 10
 bridge_skin_speed = 20
-adhesion_type = skirt
\ No newline at end of file
+adhesion_type = skirt
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg
index b7f2d85c95..5cee03e58a 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg
index da19696958..0b82245914 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg
index cde51bc7f4..7497be10d9 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg
index 668a874ad8..f01b09b4b5 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg
@@ -24,7 +24,7 @@ speed_print = 30
 speed_infill = 60
 speed_wall = =speed_print
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg
index 51f87cfed8..37ed24d55c 100644
--- a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg
@@ -12,7 +12,7 @@ material = xyzprinting_ppgf30
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 90
+material_bed_temperature = 100
 layer_height = 0.4
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -29,4 +29,9 @@ retraction_amount = 6
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+brim_width = 20.0
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
+infill_material_flow = 85
+wall_material_flow = 85
diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg
index cef5bb7222..841d1e2961 100644
--- a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg
+++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg
@@ -12,7 +12,7 @@ material = xyzprinting_ppgf30
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 90
+material_bed_temperature = 100
 layer_height = 0.3
 layer_height_0 = 0.4
 material_diameter = 1.75
@@ -29,4 +29,9 @@ retraction_amount = 6
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+brim_width = 20.0
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
+infill_material_flow = 85
+wall_material_flow = 85
diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg
index 440704d541..b3a24ea515 100644
--- a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg
+++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg
@@ -12,7 +12,7 @@ material = xyzprinting_ppgf30
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 90
+material_bed_temperature = 100
 layer_height = 0.2
 layer_height_0 = 0.3
 material_diameter = 1.75
@@ -29,4 +29,9 @@ retraction_amount = 6
 retraction_speed = 50
 retraction_prime_speed = 15
 infill_sparse_density = 10
-bridge_skin_speed = 50
\ No newline at end of file
+bridge_skin_speed = 50
+brim_width = 20.0
+acceleration_infill = 1000.0
+acceleration_wall = 1000.0
+infill_material_flow = 85
+wall_material_flow = 85
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg
index 6a177ec483..29194c06c4 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg
@@ -25,7 +25,7 @@ speed_infill = 60
 speed_wall = =speed_print
 speed_topbottom = 10 
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg
index 295f1356ba..83f3d1359a 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg
@@ -25,7 +25,7 @@ speed_infill = 60
 speed_wall = =speed_print
 speed_topbottom = 10 
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg
index 42d9b9556f..7b88f36bd6 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg
@@ -25,7 +25,7 @@ speed_infill = 60
 speed_wall = =speed_print
 speed_topbottom = 10 
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg
index d900018585..6e024b2bd5 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg
@@ -25,7 +25,7 @@ speed_infill = 60
 speed_wall = =speed_print
 speed_topbottom = 10 
 speed_support = =speed_print
-speed_travel = 120
+speed_travel = 80
 retraction_amount = 4.5
 retraction_speed = 20
 retraction_prime_speed = 15
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg
index e9caadf8de..723b5336f0 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg
@@ -30,4 +30,6 @@ retraction_speed = 50
 retraction_prime_speed = =15
 infill_sparse_density = 10
 brim_width = 5.0
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg
index 1bc5b5df89..57b5a3ece1 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg
@@ -30,4 +30,6 @@ retraction_speed = 50
 retraction_prime_speed = =15
 infill_sparse_density = 10
 brim_width = 5.0
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg
index 7c395132e8..610d1b7040 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg
@@ -30,4 +30,6 @@ retraction_speed = 50
 retraction_prime_speed = =15
 infill_sparse_density = 10
 brim_width = 5.0
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
+acceleration_wall = 1000.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg
index 167c70c4ac..34743b40dd 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg
@@ -30,4 +30,6 @@ retraction_speed = 50
 retraction_prime_speed = =15
 infill_sparse_density = 10
 brim_width = 5.0
-bridge_skin_speed = 100
\ No newline at end of file
+bridge_skin_speed = 100
+acceleration_infill = 1500.0
+acceleration_wall = 1000.0
\ No newline at end of file