diff options
16 files changed, 28 insertions, 20 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 97733a9858..00d93f3575 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 prime_tower_size = 16 skin_overlap = 20 speed_print = 60 -speed_layer_0 = =round(speed_print * 30 / 60) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index f635afd255..066a044ee0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_size = 16 speed_print = 60 -speed_layer_0 = =round(speed_print * 30 / 60) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index fc5be26a52..850af33c27 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 prime_tower_size = 16 speed_print = 50 -speed_layer_0 = =round(speed_print * 30 / 50) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index 91f55b3b6d..3793bf8b5e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_size = 16 speed_print = 55 -speed_layer_0 = =round(speed_print * 30 / 55) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index b6d6bc80b9..7a536ce033 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ material_standby_temperature = 100 prime_tower_size = 17 skin_overlap = 20 speed_print = 60 -speed_layer_0 = =round(speed_print * 30 / 60) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index 3649b3fb5c..96467fe36c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_size = 17 speed_print = 60 -speed_layer_0 = =round(speed_print * 30 / 60) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index cc5cbcea30..1fd6167e67 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_size = 17 speed_print = 50 -speed_layer_0 = =round(speed_print * 30 / 50) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index 68f8419640..5ad1ef6b43 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 prime_tower_size = 17 speed_print = 55 -speed_layer_0 = =round(speed_print * 30 / 55) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index cd411fc241..eb56b0aa4c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -18,6 +18,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 20 +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index c0b28ca6b7..c5faa17a2b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False speed_print = 80 -speed_layer_0 = =round(speed_print * 30 / 80) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index eff3a3971b..1a6db5e3b5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -20,7 +20,7 @@ material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 speed_print = 60 -speed_layer_0 = =round(speed_print * 30 / 60) +speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 30 / 60) top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 84d9a5a001..c7a7be37c0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -18,6 +18,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 10 +speed_layer_0 = 20 top_bottom_thickness = 1 wall_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index bf10c55ae9..83fd52a1fd 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -12,13 +12,15 @@ material = generic_pva_ultimaker3_BB_0.4 [values] acceleration_support = =math.ceil(acceleration_print * 500 / 4000) acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_support jerk_support = =math.ceil(jerk_print * 5 / 25) jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_support material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 skin_overlap = 20 support_interface_height = 0.8 prime_tower_enable = False +speed_support_interface = =math.ceil(speed_support * 20 / 25) +jerk_support_interface = =math.ceil(jerk_support * 1 / 5) +acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 ) +support_xy_distance = =round(line_width * 1.5, 2) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 2c6cb4af1a..582d6e9c76 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -12,13 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4 [values] acceleration_support = =math.ceil(acceleration_print * 500 / 4000) acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_support jerk_support = =math.ceil(jerk_print * 5 / 25) jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_support material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 skin_overlap = 15 support_interface_height = 0.8 prime_tower_enable = False - +speed_support_interface = =math.ceil(speed_support * 20 / 25) +jerk_support_interface = =math.ceil(jerk_support * 1 / 5) +acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 ) +support_xy_distance = =round(line_width * 1.5, 2) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 331539dedf..fc6be3ea3d 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -12,12 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4 [values] acceleration_support = =math.ceil(acceleration_print * 500 / 4000) acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_support jerk_support = =math.ceil(jerk_print * 5 / 25) jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_support support_infill_rate = 25 support_interface_height = 0.8 material_standby_temperature = 100 prime_tower_enable = False +speed_support_interface = =math.ceil(speed_support * 20 / 25) +jerk_support_interface = =math.ceil(jerk_support * 1 / 5) +acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 ) +support_xy_distance = =round(line_width * 1.5, 2) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 7ffda14a08..5eb690fa99 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -12,12 +12,13 @@ material = generic_pva_ultimaker3_BB_0.4 [values] acceleration_support = =math.ceil(acceleration_print * 500 / 4000) acceleration_support_infill = =acceleration_support -acceleration_support_interface = =acceleration_support jerk_support = =math.ceil(jerk_print * 5 / 25) jerk_support_infill = =jerk_support -jerk_support_interface = =jerk_support support_infill_rate = 25 support_interface_height = 0.8 material_standby_temperature = 100 prime_tower_enable = False - +speed_support_interface = =math.ceil(speed_support * 20 / 25) +jerk_support_interface = =math.ceil(jerk_support * 1 / 5) +acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 ) +support_xy_distance = =round(line_width * 1.5, 2) |