diff options
-rw-r--r-- | resources/definitions/ultimaker_original.def.json | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/resources/definitions/ultimaker_original.def.json b/resources/definitions/ultimaker_original.def.json index 71130312e7..68770c926e 100644 --- a/resources/definitions/ultimaker_original.def.json +++ b/resources/definitions/ultimaker_original.def.json @@ -55,7 +55,7 @@ "default_value": "RepRap (Marlin/Sprinter)" }, "machine_start_gcode": { - "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." + "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y50 F9000\n;Put printing message on LCD screen\nM117 Printing..." }, "machine_end_gcode": { "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" |