121 files changed, 4830 insertions, 0 deletions

diff --git a/resources/definitions/weedo_x40.def.json b/resources/definitions/weedo_x40.def.json
new file mode 100644
index 0000000000..57be24353f
--- /dev/null
+++ b/resources/definitions/weedo_x40.def.json
@@ -0,0 +1,309 @@
+{

+    "version": 2,

+    "name": "WEEDO X40",

+    "inherits": "fdmprinter",

+    "metadata": {

+        "author": "X40-Community.org",

+        "manufacturer": "WEEDO",

+        "visible": true,

+        "file_formats": "text/x-gcode",

+        "platform": "weedo_x40.3mf",

+        "platform_offset": [ 0, 193, 35],

+        "has_machine_quality": true,

+        "has_materials": true,

+        "has_variants": true,

+        "preferred_material": "generic_pla_175",

+        "exclude_materials": [

+            "3D-Fuel_PLA_PRO_Black",

+            "3D-Fuel_PLA_SnapSupport",

+            "bestfilament_abs_skyblue",

+            "bestfilament_petg_orange",

+            "bestfilament_pla_green",

+            "leapfrog_abs_natural",

+            "leapfrog_epla_natural",

+            "leapfrog_pva_natural",

+            "structur3d_dap100silicone",

+            "generic_gffpa",

+            "generic_gffcpe",

+            "generic_cffpa",

+            "generic_cffcpe", 

+            "generic_petg",

+            "generic_hips",

+            "generic_pc_175",

+            "generic_pc",

+            "generic_nylon_175",

+            "generic_nylon",

+            "emotiontech_abs",

+            "emotiontech_absx",

+            "emotiontech_acetate",

+            "emotiontech_asax",

+            "emotiontech_bvoh",

+            "emotiontech_hips",

+            "emotiontech_petg",

+            "emotiontech_pla",

+            "emotiontech_pva-m",

+            "emotiontech_pva-s",

+            "emotiontech_tpu98a",

+            "eSUN_PETG_Black",

+            "eSUN_PETG_Grey",

+            "eSUN_PETG_Purple",

+            "eSUN_PLA_PRO_Black",

+            "eSUN_PLA_PRO_Grey",

+            "eSUN_PLA_PRO_Purple",

+            "eSUN_PLA_PRO_White",

+            "Vertex_Delta_ABS",

+            "Vertex_Delta_PET",

+            "Vertex_Delta_PLA",

+            "Vertex_Delta_TPU",

+            "chromatik_pla",

+            "dsm_arnitel2045_175",

+            "dsm_novamid1070_175",

+            "fabtotum_abs",

+            "fabtotum_nylon",

+            "fabtotum_pla",

+            "fabtotum_tpu",

+            "fdplast_abs_tomato",

+            "fdplast_petg_gray",

+            "fdplast_pla_olive",

+            "fiberlogy_hd_pla",

+            "filo3d_pla",

+            "filo3d_pla_green",

+            "filo3d_pla_red",

+            "imade3d_petg_green",

+            "imade3d_petg_pink",

+            "imade3d_pla_green",

+            "imade3d_pla_pink",

+            "imade3d_petg_175",

+            "imade3d_pla_175",

+            "innofill_innoflex60_175",

+            "octofiber_pla",

+            "polyflex_pla",

+            "polymax_pla",

+            "polyplus_pla",

+            "polywood_pla",

+            "redd_abs",

+            "redd_asa",

+            "redd_hips",

+            "redd_nylon",

+            "redd_petg",

+            "redd_pla",

+            "redd_tpe",            

+            "structur3d_dap100silicone",

+            "tizyx_abs",

+            "tizyx_flex",

+            "tizyx_petg",

+            "tizyx_pla_bois",

+            "tizyx_pla",

+            "tizyx_pva",

+            "ultimaker_abs_black",

+            "ultimaker_abs_blue",

+            "ultimaker_abs_green",

+            "ultimaker_abs_grey",

+            "ultimaker_abs_orange",

+            "ultimaker_abs_pearl-gold",

+            "ultimaker_abs_red",

+            "ultimaker_abs_silver-metallic",

+            "ultimaker_abs_white",

+            "ultimaker_abs_yellow",

+            "ultimaker_bam",

+            "ultimaker_cpe_black",

+            "ultimaker_cpe_blue",

+            "ultimaker_cpe_dark-grey",

+            "ultimaker_cpe_green",

+            "ultimaker_cpe_light-grey",

+            "ultimaker_cpe_plus_black",

+            "ultimaker_cpe_plus_transparent",

+            "ultimaker_cpe_plus_white",

+            "ultimaker_cpe_red",

+            "ultimaker_cpe_transparent",

+            "ultimaker_cpe_white",

+            "ultimaker_cpe_yellow",

+            "ultimaker_nylon_black",

+            "ultimaker_nylon_transparent",

+            "ultimaker_pc_black",

+            "ultimaker_pc_transparent",

+            "ultimaker_pc_white",

+            "ultimaker_pla_black",

+            "ultimaker_pla_blue",

+            "ultimaker_pla_green",

+            "ultimaker_pla_magenta",

+            "ultimaker_pla_orange",

+            "ultimaker_pla_pearl-white",

+            "ultimaker_pla_red",

+            "ultimaker_pla_silver-metallic",

+            "ultimaker_pla_transparent",

+            "ultimaker_pla_white",

+            "ultimaker_pla_yellow",

+            "ultimaker_pp_transparent",

+            "ultimaker_pva",

+            "ultimaker_tough_pla_black",

+            "ultimaker_tough_pla_green",

+            "ultimaker_tough_pla_red",

+            "ultimaker_tough_pla_white",

+            "ultimaker_tpu_black",

+            "ultimaker_tpu_blue",

+            "ultimaker_tpu_red",

+            "ultimaker_tpu_white",

+            "Vertex_Delta_ABS",

+            "Vertex_Delta_PET",

+            "Vertex_Delta_PLA_Glitter",

+            "Vertex_Delta_PLA_Mat",

+            "Vertex_Delta_PLA_Satin",

+            "Vertex_Delta_PLA_Wood",

+            "Vertex_Delta_PLA",

+            "Vertex_Delta_TPU",

+            "zyyx_pro_flex",

+            "zyyx_pro_pla"

+        ],

+        "preferred_variant_name": "0.4mm Nozzle",

+        "preferred_quality_type": "normal",

+        "variants_name": "Nozzle Type",

+        "machine_extruder_trains":

+        {

+            "0": "weedo_x40_extruder_left_0",

+            "1": "weedo_x40_extruder_right_0"

+        },

+        "supports_usb_connection": true

+    },

+    

+    "overrides": {

+        "machine_name": { "default_value": "Weedo X40" },

+        "machine_width": { "default_value": 300 },

+        "machine_depth": { "default_value": 300 },

+        "machine_height": { "default_value": 400 },

+        "machine_heated_bed": { "default_value": true },

+        "machine_nozzle_heat_up_speed": { "default_value": 6 },

+        "machine_nozzle_cool_down_speed": { "default_value": 4 },

+        "machine_head_with_fans_polygon":

+        {

+            "default_value":

+            [

+                [ -42.5, 18 ],

+                [ -42.5, -50 ],

+                [ 24.5, 18 ],

+                [ 24.5, -50.0 ]

+            ]

+        },

+        "machine_max_feedrate_x": { "value": 500 },

+        "machine_max_feedrate_y": { "value": 500 },

+        "machine_max_feedrate_z": { "value": 10 },

+        "machine_max_feedrate_e": { "value": 50 },       

+        "machine_acceleration": { "value": 500 },

+        "machine_max_acceleration_x": { "value": 500 },

+        "machine_max_acceleration_y": { "value": 500 },

+        "machine_max_acceleration_z": { "value": 100 },

+        "machine_max_acceleration_e": { "value": 5000 },

+        "gantry_height": { "value": "12" },

+        "machine_extruder_count": { "default_value": 2 },

+        "machine_start_gcode": {"default_value": "; x40-community.org configuration Rev. 07\n;(**** start.gcode for WEEDO X40 DUAL****)\nT{initial_extruder_nr} S ; Selected start extruder\nM140 S{material_bed_temperature_layer_0} ; Preheat bed\nM109 S{material_print_temperature_layer_0}; Preheat nozzle\nM73 P0 ; Set current print progress percentage\nG21 ; Millimeter Units\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nT0 S ; Select left extruder\nM301 H1 P15.53 I1.32 D45.75 ; PID left extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID left extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate left extruder\nT1 S ; Select right extruder\nM301 H1 P15.44 I1.29 D46.11 ; PID right extruder with Weedo X40 coolingsystem\n;M301 H1 P13.32 I0.98 D45.13 ; PID right extruder with X40 Community coolingsystem\nM92 E94.90 ; Calibrate right extruder\nT0 S ; Select left extruder\nG28 ; Auto home\nM420 S ; Actived bed leveling\nG29 ; Bed Leveling\nG1 X-47 F3000 ; Move left nozzle to parking position\nT1 S ; select right extruder\nG1 X352 F3000 ; Move right nozzle to parking position\nM107 ; Turn off fan\nT{initial_extruder_nr} S ; Set start extruder\nM190 S{material_bed_temperature_layer_0} ; Waiting for bed temperature\nM192 S{material_print_temperature_layer_0} ; Waiting for nozzle temperature\nG1 E50 F100 ; Extrude in parking position\nM77 ; Stop heat up timer\nM75 ; Start print timer\n" 

+        },

+        "machine_end_gcode": {"default_value": "(*********end X40 End.gcode*******)\nG28 X Y F3000\nG91 ; Relative positioning\nG1 E-6 ; Reduce filament pressure\nG90\nG0 Y300 F3000\nM104 S0 T0\nM104 S0 T1\nM140 S0\nM107\nM82\nM73 P100" },

+        "prime_tower_position_x": { "default_value": 50 },

+        "prime_tower_position_y": { "default_value": 250 },

+        

+        "speed_travel":

+        {

+            "maximum_value": "150",

+            "value": "150"

+        },

+

+        "acceleration_enabled": { "value": false },

+        "acceleration_print": { "value": 1000 },

+        "acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },

+        "acceleration_support_interface": { "value": "acceleration_topbottom" },

+        "acceleration_topbottom": { "value": "math.ceil(acceleration_print * 500 / 4000)" },

+        "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 4000)" },

+        "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 500 / 1000)" },

+        "acceleration_travel": { "value": 2000 },

+        "acceleration_travel_layer_0": { "value": "acceleration_travel / 2" },

+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },

+        "brim_width": { "value": "8" },

+        "bridge_settings_enabled": { "default_value": true },

+        "cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },

+        "cool_fan_speed": { "value": "50" },

+        "cool_fan_speed_max": { "value": "100" },

+        "cool_min_speed": { "value": "5" },

+        "fill_perimeter_gaps": { "value": "'everywhere'" },

+        "fill_outline_gaps": { "value": false },

+        "filter_out_tiny_gaps": { "value": false },

+        "infill_overlap": { "value": 30.0 },

+        "infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },

+        "infill_wipe_dist": { "value": 0.0 },

+        "infill_sparse_density": { "value": "20" },

+        "infill_before_walls": { "value": false },

+        "jerk_enabled": { "value": false },

+        "jerk_print": { "value": 11 },

+       

+        "jerk_wall": { "value": "jerk_print - 2" },

+        "jerk_travel": { "value": 18 },

+        "jerk_travel_layer_0": { "value": "jerk_travel" },

+       

+        "line_width": { "value": "machine_nozzle_size" },

+        "machine_min_cool_heat_time_window": { "default_value": 360 },

+        "machine_max_jerk_xy": { "value": 10 },

+        "machine_max_jerk_z": { "value": 0.4 },

+        "machine_max_jerk_e": { "value": 5 },

+        "machine_center_is_zero": { "default_value": false },

+        "material_diameter": { "default_value": 1.75 },

+        "material_flow": { "value": 100 },

+        "material_standby_temperature": { "value": "100" },

+        "material_print_temp_prepend": { "default_value":false },

+        "material_standby_enable": { "default_value": false },

+        "max_feedrate_z_override": { "default_value": 5 },

+        "model_thumbnail": { "default_value": true },

+        "model_thumbnail_size": { "default_value": 180 },

+        "model_thumbnail_angle": { "default_value": 0 },        

+        "prime_tower_enable": { "default_value": false },

+        "raft_airgap": { "default_value": 0.22 },

+        "raft_base_speed":{ "value": 20 },

+        "raft_base_thickness":{ "default_value": 0.35 }, 

+        "raft_interface_speed": { "value": 33 },

+        "raft_margin": { "default_value": 8 },

+        "retraction_enable": { "value": true },

+        "retraction_amount": { "default_value": 4.5 },

+        "retraction_count_max": { "value": 100 },

+        "retraction_extrusion_window": { "value": 8 },

+        "retraction_hop": { "value": 0.5 },

+        "retraction_hop_enabled": { "value": "False" },

+        "retraction_min_travel": { "value": 1.5 },

+        "skin_overlap": { "value": 10.0 },

+        "speed_layer_0": { "value": 20.0 },

+        "speed_print": { "value": 50.0 },

+        "speed_support": { "value": "speed_wall_0" },

+        "speed_support_interface": { "value": "speed_topbottom" },

+        "speed_topbottom": { "value": "speed_print / 2" }, 

+        "speed_wall": { "value": "speed_print / 2" },

+        "speed_wall_0": { "value": "speed_wall" },

+        "speed_wall_x": { "value": "speed_wall" },

+        "speed_infill": { "value": 60.0 },

+        "speed_support_infill": { "value": 58.0 },

+        "speed_print_layer_0": { "value": 26.0 },

+        "speed_travel_layer_0": { "value": 60 },

+        "speed_support_roof": { "value": 39.0 },

+        "speed_support_bottom": { "value": 39.0 },

+        "speed_roofing": { "value": 30.0 },

+        "support_angle": { "default_value": 60 },

+        "support_pattern": { "value": "'zigzag'" },

+        "support_use_towers": { "value": true },

+        "support_xy_distance": { "value": "wall_line_width_0 * 2" },

+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },

+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },

+        "switch_extruder_retraction_amount": { "value": 0 },

+        "travel_compensate_overlapping_walls_0_enabled": { "value": "False" },

+        "travel_avoid_other_parts": { "value": true },

+        "travel_retract_before_outer_wall": { "value": true },

+        "top_bottom_thickness": {"value":  "line_width * 2" },

+        "travel_avoid_supports": { "value": true },

+        "wall_thickness": {"value": "line_width * 2" },

+        "wall_0_wipe_dist": { "value": 0.0 },

+        "meshfix_maximum_resolution": { "value": "0.25" },

+        "optimize_wall_printing_order": { "value": "True" },

+        "ooze_shield_enabled":{ "default_value":false },

+        "ooze_shield_dist":{ "default_value":3.0 },

+        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" },

+        "retraction_combing_max_distance": { "value": 30 },

+        "retraction_speed": { "default_value": 28 },

+        "z_seam_type": { "value": "'back'" },

+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" } 

+    }

+}

diff --git a/resources/extruders/weedo_x40_extruder_left_0.def.json b/resources/extruders/weedo_x40_extruder_left_0.def.json
new file mode 100644
index 0000000000..955e98f0de
--- /dev/null
+++ b/resources/extruders/weedo_x40_extruder_left_0.def.json
@@ -0,0 +1,22 @@
+{
+    "version": 2,
+    "name": "Extruder Left",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "weedo_x40",
+        "position": "0",
+        "quality_definition": "weedo_x40_extruder_left_0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": { "default_value": "; left extruder start code\n"}
+    }
+}
diff --git a/resources/extruders/weedo_x40_extruder_right_0.def.json b/resources/extruders/weedo_x40_extruder_right_0.def.json
new file mode 100644
index 0000000000..1a1f9e591d
--- /dev/null
+++ b/resources/extruders/weedo_x40_extruder_right_0.def.json
@@ -0,0 +1,22 @@
+{
+    "version": 2,
+    "name": "Extruder Right",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "weedo_x40",
+        "position": "1",
+        "quality_definition": "weedo_x40_extruder_right_0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_offset_x": { "default_value": 0 },
+        "machine_nozzle_offset_y": { "default_value": 0 },
+        "machine_extruder_start_code": { "default_value": "; right extruder start code\n"}
+    }
+}
diff --git a/resources/meshes/weedo_x40.3mf b/resources/meshes/weedo_x40.3mf
new file mode 100644
index 0000000000..d33facda81
--- /dev/null
+++ b/resources/meshes/weedo_x40.3mf
diff --git a/resources/quality/weedo_x40/0.4_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ABS_Draft.inst.cfg
new file mode 100644
index 0000000000..0eff394742
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ABS_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_abs_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_ABS_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ABS_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..02dbc6f51c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ABS_Extra_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_abs_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_ABS_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ABS_Fine.inst.cfg
new file mode 100644
index 0000000000..13f0f1e28e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ABS_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_abs_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ABS_Normal.inst.cfg
new file mode 100644
index 0000000000..1cd7678044
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ABS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_abs_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ASA_Draft.inst.cfg
new file mode 100644
index 0000000000..fd0655601e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ASA_Draft.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Default Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_asa_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+
+
+
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_ASA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ASA_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..3b7c9d565d
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ASA_Extra_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_asa_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_ASA_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ASA_Fine.inst.cfg
new file mode 100644
index 0000000000..ee39d40cff
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ASA_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_asa_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_ASA_Normal.inst.cfg
new file mode 100644
index 0000000000..aa3d67e587
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_ASA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_asa_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_BVOH_Draft.inst.cfg
new file mode 100644
index 0000000000..62b22f53f8
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_BVOH_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_bvoh_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_BVOH_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_BVOH_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..6aa8c5a3c8
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_BVOH_Extra_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 0
+material = generic_bvoh_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_BVOH_Fine.inst.cfg
new file mode 100644
index 0000000000..17b81fcd69
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_BVOH_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_bvoh_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_BVOH_Normal.inst.cfg
new file mode 100644
index 0000000000..7516382a13
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_BVOH_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_bvoh_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_CPE_Draft.inst.cfg
new file mode 100644
index 0000000000..2c2c2a61f5
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_CPE_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_cpe_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_CPE_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_CPE_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..be5fcc7afb
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_CPE_Extra_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_cpe_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_CPE_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_CPE_Fine.inst.cfg
new file mode 100644
index 0000000000..12636b17c9
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_CPE_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_cpe_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_CPE_Normal.inst.cfg
new file mode 100644
index 0000000000..c08faae11e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_CPE_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_cpe_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_HIPS_Draft.inst.cfg
new file mode 100644
index 0000000000..e58ed4a0b0
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_HIPS_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_hips_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_HIPS_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_HIPS_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..fe7887b9cd
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_HIPS_Extra_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_hips_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_HIPS_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_HIPS_Fine.inst.cfg
new file mode 100644
index 0000000000..1cc2bf396c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_HIPS_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_hips_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_HIPS_Normal.inst.cfg
new file mode 100644
index 0000000000..719e7ffd1c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_HIPS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_hips_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PETG_Draft.inst.cfg
new file mode 100644
index 0000000000..975e0b8979
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PETG_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_petg_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PETG_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PETG_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..bf46cdd059
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PETG_Extra_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_petg_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PETG_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PETG_Fine.inst.cfg
new file mode 100644
index 0000000000..92e4030ed9
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PETG_Fine.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_petg_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PETG_Normal.inst.cfg
new file mode 100644
index 0000000000..9de18fab58
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PETG_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PLA_Draft.inst.cfg
new file mode 100644
index 0000000000..1c0d0b505f
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PLA_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pla_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PLA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PLA_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..de33905d06
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PLA_Extra_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_pla_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_PLA_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PLA_Fine.inst.cfg
new file mode 100644
index 0000000000..fe191782d0
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PLA_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_pla_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PLA_Normal.inst.cfg
new file mode 100644
index 0000000000..320e5f1780
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PLA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed = 100
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PVA_Draft.inst.cfg
new file mode 100644
index 0000000000..36e87a3bf4
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PVA_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pva_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PVA_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PVA_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..f9c1e8f8c1
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PVA_Extra_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 0
+material = generic_pva_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PVA_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PVA_Fine.inst.cfg
new file mode 100644
index 0000000000..6aafd1ed44
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PVA_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_pva_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_PVA_Normal.inst.cfg
new file mode 100644
index 0000000000..0e2803af22
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_PVA_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pva_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.4_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/0.4_generic_TPU_Draft.inst.cfg
new file mode 100644
index 0000000000..33029e5ed9
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_TPU_Draft.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_tpu_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_TPU_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_TPU_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..394d80acbe
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_TPU_Extra_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = 1
+material = generic_tpu_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.12
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.4_generic_TPU_Fine.inst.cfg b/resources/quality/weedo_x40/0.4_generic_TPU_Fine.inst.cfg
new file mode 100644
index 0000000000..903bd4874f
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_TPU_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_tpu_175
+variant = 0.4mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 35
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.4_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/0.4_generic_TPU_Normal.inst.cfg
new file mode 100644
index 0000000000..905d012f7d
--- /dev/null
+++ b/resources/quality/weedo_x40/0.4_generic_TPU_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tpu_175
+variant = 0.4mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ABS_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ABS_Coarse.inst.cfg
new file mode 100644
index 0000000000..9cb061e225
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ABS_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = -1
+material = generic_abs_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ABS_Draft.inst.cfg
new file mode 100644
index 0000000000..a92c54d246
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ABS_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_abs_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ABS_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ABS_Fine.inst.cfg
new file mode 100644
index 0000000000..2aa3381470
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ABS_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_abs_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ABS_Normal.inst.cfg
new file mode 100644
index 0000000000..9c15750c66
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ABS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_abs_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ASA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ASA_Coarse.inst.cfg
new file mode 100644
index 0000000000..aa319c5ee3
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ASA_Coarse.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_asa_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+
+
+
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ASA_Draft.inst.cfg
new file mode 100644
index 0000000000..d660bfdb6c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ASA_Draft.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_asa_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+
+
+
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_ASA_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ASA_Fine.inst.cfg
new file mode 100644
index 0000000000..85ffd1f32f
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ASA_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_asa_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.6_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_ASA_Normal.inst.cfg
new file mode 100644
index 0000000000..12740e32ef
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_ASA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_asa_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_BVOH_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_BVOH_Coarse.inst.cfg
new file mode 100644
index 0000000000..73e13d3062
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_BVOH_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_bvoh_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_BVOH_Draft.inst.cfg
new file mode 100644
index 0000000000..aad26098ad
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_BVOH_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_bvoh_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_BVOH_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_BVOH_Fine.inst.cfg
new file mode 100644
index 0000000000..a5a32a9339
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_BVOH_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_bvoh_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_BVOH_Normal.inst.cfg
new file mode 100644
index 0000000000..33fdaae0d6
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_BVOH_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_bvoh_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_CPE_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_CPE_Coarse.inst.cfg
new file mode 100644
index 0000000000..f27789d960
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_CPE_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_cpe_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_CPE_Draft.inst.cfg
new file mode 100644
index 0000000000..03072a432e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_CPE_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_cpe_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_CPE_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_CPE_Fine.inst.cfg
new file mode 100644
index 0000000000..9cf28ebc51
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_CPE_Fine.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_cpe_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.6_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_CPE_Normal.inst.cfg
new file mode 100644
index 0000000000..2ad740a6a6
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_CPE_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_cpe_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_HIPS_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_HIPS_Coarse.inst.cfg
new file mode 100644
index 0000000000..4095579b23
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_HIPS_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_hips_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_HIPS_Draft.inst.cfg
new file mode 100644
index 0000000000..c126d796a0
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_HIPS_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_hips_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_HIPS_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_HIPS_Fine.inst.cfg
new file mode 100644
index 0000000000..991c9145eb
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_HIPS_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_hips_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_HIPS_Normal.inst.cfg
new file mode 100644
index 0000000000..08046c6fa7
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_HIPS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_hips_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PETG_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PETG_Coarse.inst.cfg
new file mode 100644
index 0000000000..ab4a8666b0
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PETG_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_petg_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PETG_Draft.inst.cfg
new file mode 100644
index 0000000000..7c983c6669
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PETG_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_petg_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PETG_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PETG_Fine.inst.cfg
new file mode 100644
index 0000000000..5ce29f9d4e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PETG_Fine.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_petg_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PETG_Normal.inst.cfg
new file mode 100644
index 0000000000..d16b7d3578
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PETG_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PLA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PLA_Coarse.inst.cfg
new file mode 100644
index 0000000000..9b139e439d
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PLA_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_pla_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PLA_Draft.inst.cfg
new file mode 100644
index 0000000000..3280e8b420
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PLA_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pla_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PLA_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PLA_Fine.inst.cfg
new file mode 100644
index 0000000000..07385efe77
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PLA_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_pla_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PLA_Normal.inst.cfg
new file mode 100644
index 0000000000..c764bcc6f5
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PLA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed = 100
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.6_generic_PVA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PVA_Coarse.inst.cfg
new file mode 100644
index 0000000000..b000f0d666
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PVA_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_pva_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PVA_Draft.inst.cfg
new file mode 100644
index 0000000000..78ce0922db
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PVA_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pva_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PVA_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PVA_Fine.inst.cfg
new file mode 100644
index 0000000000..dfae5bcbac
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PVA_Fine.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_pva_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_PVA_Normal.inst.cfg
new file mode 100644
index 0000000000..309006e03c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_PVA_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pva_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.6_generic_TPU_Coarse.inst.cfg b/resources/quality/weedo_x40/0.6_generic_TPU_Coarse.inst.cfg
new file mode 100644
index 0000000000..198eb4cae0
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_TPU_Coarse.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_tpu_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.6_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/0.6_generic_TPU_Draft.inst.cfg
new file mode 100644
index 0000000000..53fc22e012
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_TPU_Draft.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_tpu_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.6_generic_TPU_Fine.inst.cfg b/resources/quality/weedo_x40/0.6_generic_TPU_Fine.inst.cfg
new file mode 100644
index 0000000000..eac7461ab2
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_TPU_Fine.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = 0
+material = generic_tpu_175
+variant = 0.6mm Nozzle
+
+
+[values]
+layer_height = 0.16
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.6_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/0.6_generic_TPU_Normal.inst.cfg
new file mode 100644
index 0000000000..b03bb24784
--- /dev/null
+++ b/resources/quality/weedo_x40/0.6_generic_TPU_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tpu_175
+variant = 0.6mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ABS_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ABS_Coarse.inst.cfg
new file mode 100644
index 0000000000..178da746bf
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ABS_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = -1
+material = generic_abs_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ABS_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ABS_Draft.inst.cfg
new file mode 100644
index 0000000000..2afa941306
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ABS_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -1
+material = generic_abs_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ABS_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ABS_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..cdf67ee064
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ABS_Extra_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_abs_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ABS_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ABS_Normal.inst.cfg
new file mode 100644
index 0000000000..957ad6aa76
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ABS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_abs_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ASA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ASA_Coarse.inst.cfg
new file mode 100644
index 0000000000..abc345261e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ASA_Coarse.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_asa_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+
+
+
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ASA_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ASA_Draft.inst.cfg
new file mode 100644
index 0000000000..6fd0a3be25
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ASA_Draft.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_asa_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+
+
+
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_ASA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ASA_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..d6d59032c5
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ASA_Extra_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_asa_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.8_generic_ASA_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_ASA_Normal.inst.cfg
new file mode 100644
index 0000000000..adfca71f64
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_ASA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_asa_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_BVOH_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_BVOH_Coarse.inst.cfg
new file mode 100644
index 0000000000..18cd9783df
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_BVOH_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_bvoh_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_BVOH_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_BVOH_Draft.inst.cfg
new file mode 100644
index 0000000000..a1aa30cd66
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_BVOH_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_bvoh_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_BVOH_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_BVOH_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..46ced4414e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_BVOH_Extra_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_bvoh_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_BVOH_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_BVOH_Normal.inst.cfg
new file mode 100644
index 0000000000..43aed61782
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_BVOH_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_bvoh_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_CPE_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_CPE_Coarse.inst.cfg
new file mode 100644
index 0000000000..e3c3df7902
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_CPE_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_cpe_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_CPE_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_CPE_Draft.inst.cfg
new file mode 100644
index 0000000000..6ca8378905
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_CPE_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_cpe_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_CPE_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_CPE_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..c5ea83ef35
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_CPE_Extra_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_cpe_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.8_generic_CPE_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_CPE_Normal.inst.cfg
new file mode 100644
index 0000000000..11f90d971b
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_CPE_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_cpe_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_HIPS_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_HIPS_Coarse.inst.cfg
new file mode 100644
index 0000000000..d40c1e3b2c
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_HIPS_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_hips_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_HIPS_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_HIPS_Draft.inst.cfg
new file mode 100644
index 0000000000..e66143a1fd
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_HIPS_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_hips_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_HIPS_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_HIPS_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..e3771ce8f5
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_HIPS_Extra_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_hips_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_HIPS_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_HIPS_Normal.inst.cfg
new file mode 100644
index 0000000000..1282d3f111
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_HIPS_Normal.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_hips_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PETG_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PETG_Coarse.inst.cfg
new file mode 100644
index 0000000000..ee2deb6be5
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PETG_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_petg_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PETG_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PETG_Draft.inst.cfg
new file mode 100644
index 0000000000..b16de88b18
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PETG_Draft.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_petg_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PETG_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PETG_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..2a63adf6ce
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PETG_Extra_Coarse.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_petg_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PETG_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PETG_Normal.inst.cfg
new file mode 100644
index 0000000000..008f4a82ea
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PETG_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PLA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PLA_Coarse.inst.cfg
new file mode 100644
index 0000000000..0466891442
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PLA_Coarse.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_pla_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PLA_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PLA_Draft.inst.cfg
new file mode 100644
index 0000000000..d974caaf60
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PLA_Draft.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pla_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 50
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PLA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PLA_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..8af811a126
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PLA_Extra_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_pla_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PLA_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PLA_Normal.inst.cfg
new file mode 100644
index 0000000000..0cd5efc691
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PLA_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed = 100
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.8_generic_PVA_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PVA_Coarse.inst.cfg
new file mode 100644
index 0000000000..53c1d713dd
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PVA_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_pva_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PVA_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PVA_Draft.inst.cfg
new file mode 100644
index 0000000000..b448270ff4
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PVA_Draft.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_pva_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PVA_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PVA_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..113cb436df
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PVA_Extra_Coarse.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_pva_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_PVA_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_PVA_Normal.inst.cfg
new file mode 100644
index 0000000000..d2fda989af
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_PVA_Normal.inst.cfg
@@ -0,0 +1,46 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pva_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
+support_material_flow=100
+support_angle = 45
+support_pattern = grid
+support_z_distance = 0
+support_xy_distance = 0.2
+support_brim_enable = True
+support_interface_enable = True
+
diff --git a/resources/quality/weedo_x40/0.8_generic_TPU_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_TPU_Coarse.inst.cfg
new file mode 100644
index 0000000000..2d8695a0f3
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_TPU_Coarse.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Default - Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = 0
+material = generic_tpu_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.28
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.8_generic_TPU_Draft.inst.cfg b/resources/quality/weedo_x40/0.8_generic_TPU_Draft.inst.cfg
new file mode 100644
index 0000000000..634dc6d89e
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_TPU_Draft.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Default - Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = 0
+material = generic_tpu_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.24
+layer_height_0 = =round(layer_height * 1.25, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 60
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
diff --git a/resources/quality/weedo_x40/0.8_generic_TPU_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/0.8_generic_TPU_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..b5ce13a2e6
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_TPU_Extra_Coarse.inst.cfg
@@ -0,0 +1,39 @@
+[general]
+version = 4
+name = Default - Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = 0
+material = generic_tpu_175
+variant = 0.8mm Nozzle
+
+
+[values]
+layer_height = 0.32
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 30
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/0.8_generic_TPU_Normal.inst.cfg b/resources/quality/weedo_x40/0.8_generic_TPU_Normal.inst.cfg
new file mode 100644
index 0000000000..d772a197a4
--- /dev/null
+++ b/resources/quality/weedo_x40/0.8_generic_TPU_Normal.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Default - Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tpu_175
+variant = 0.8mm Nozzle
+
+[values]
+layer_height = 0.2
+layer_height_0 = =round(layer_height * 1.5, 2)
+support_fan_enable = True
+support_supported_skin_fan_speed = 100
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+
+speed_print = 40
+speed_layer_0 = =round(speed_print / 2.5, 2)
+speed_print_layer_0 = =speed_layer_0
+speed_infill = =speed_print
+speed_support_interface = =speed_print
+speed_wall = =round(speed_print / 2, 2)
+speed_wall_0 = =speed_wall
+speed_wall_x = =speed_wall
+speed_topbottom = =speed_wall
+
diff --git a/resources/quality/weedo_x40/global_Coarse.inst.cfg b/resources/quality/weedo_x40/global_Coarse.inst.cfg
new file mode 100644
index 0000000000..4cb28b8d3e
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Coarse.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = coarse
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.28
+raft_interface_thickness = 0.32
+
diff --git a/resources/quality/weedo_x40/global_Draft.inst.cfg b/resources/quality/weedo_x40/global_Draft.inst.cfg
new file mode 100644
index 0000000000..8a8cd4a767
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Draft.inst.cfg
@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.24
+raft_interface_thickness = 0.30
+
diff --git a/resources/quality/weedo_x40/global_Extra_Coarse.inst.cfg b/resources/quality/weedo_x40/global_Extra_Coarse.inst.cfg
new file mode 100644
index 0000000000..e2dd316359
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Extra_Coarse.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Extra Coarse
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra coarse
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.32
+
diff --git a/resources/quality/weedo_x40/global_Extra_Fine.inst.cfg b/resources/quality/weedo_x40/global_Extra_Fine.inst.cfg
new file mode 100644
index 0000000000..86aaa4ad66
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Extra_Fine.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = extra fine
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.12
diff --git a/resources/quality/weedo_x40/global_Fine.inst.cfg b/resources/quality/weedo_x40/global_Fine.inst.cfg
new file mode 100644
index 0000000000..4e8386d05d
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Fine.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Fine
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fine
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.16
+
diff --git a/resources/quality/weedo_x40/global_Normal.inst.cfg b/resources/quality/weedo_x40/global_Normal.inst.cfg
new file mode 100644
index 0000000000..cec2228d4b
--- /dev/null
+++ b/resources/quality/weedo_x40/global_Normal.inst.cfg
@@ -0,0 +1,15 @@
+[general]
+version = 4
+name = Normal
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.2
+
diff --git a/resources/variants/weedo_x40_weedo_0.4.inst.cfg b/resources/variants/weedo_x40_weedo_0.4.inst.cfg
new file mode 100644
index 0000000000..d6818c7a2f
--- /dev/null
+++ b/resources/variants/weedo_x40_weedo_0.4.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm Nozzle
+version = 4
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.4
diff --git a/resources/variants/weedo_x40_weedo_0.6.inst.cfg b/resources/variants/weedo_x40_weedo_0.6.inst.cfg
new file mode 100644
index 0000000000..44caabbd00
--- /dev/null
+++ b/resources/variants/weedo_x40_weedo_0.6.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm Nozzle
+version = 4
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.6
diff --git a/resources/variants/weedo_x40_weedo_0.8.inst.cfg b/resources/variants/weedo_x40_weedo_0.8.inst.cfg
new file mode 100644
index 0000000000..b283fd4f66
--- /dev/null
+++ b/resources/variants/weedo_x40_weedo_0.8.inst.cfg
@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm Nozzle
+version = 4
+definition = weedo_x40
+
+[metadata]
+setting_version = 16
+type = variant
+hardware_type = nozzle
+
+[values]
+machine_nozzle_size = 0.8